Home

- colomboCCTV

1. oocccconnncnccccnnnncoconnnncononnnnonnanennononcnnnonancnnnnnannnnnnnnrnnnnnanens 105 o 3 1 Production Introduction 1 1 Product overview The series DVR is designed specially for security and defence field which is an outstanding digital surveillance product It introduces embedded LINUX operating system which is more stable It introduces standard H 264mp video compressed format and G 711A audio compressed format which insures the high quality image low error coding ratio and single frame playing It introduces TCP IP network technology which achieves the strong network communication ability and telecommunication ability The series DVR can be used individually or online applied as a part of a safety surveillance network With the professional network video surveillance software it achieves the strong network communication ability and telecommunication ability The series DVR can be applied in the bank telecom electric power system judicial system transportation intelligent housing factory storehouse water conservancy and so on 1 2 Main functions Real time surveillance spot interface analog interface VGA interface and HDMI interface surveillance function through monitor or display Storage non working hard disk dormancy processing which is convenient to radiate heat reduce power and extend the life span special storage format which insures the data safety Compression real time compression by ind
2. Pic 4 34 WIFI configure Search click search to search all the available wireless device in current range enable tick it to enable firstly then go for further setting auto obtain IP address tick it to enable device will auto obtain a WIFI IP SSID wireless LAN name auto match to the wireless device u connected Password wireless network password of router IP address to set the IP address of device default is 192 168 1 12 subnet mask set subnet mask of device default is 255 255 255 0 gateway set gateway of device default is 192 168 1 1 RTSP To do surveillance via cross browser Safari Firefox Google chrome and VLC software This function only for monitor but can not control the device OK l Cancel Pic 4 35 RTSP setting Enable m means enable tick it firstly before setting Port the default port is 554 60 W 4 4 5 GUI Display Configure the video output parameters including the front output mode and encode output mode Front output In the local preview mode include channel title time display channel display record status alarm status transparency and region cover Encode output In the network surveillance and video file mode include channel title time display channel display record status alarm status transparency and region cover Remark Only 6000 series product support preview resolution 1920 1280 1080P Main Menu gt System gt GUI Display Channel Title w
3. OO pRpRnRQRKXhhh 1 The firoware released after Sep 28th 2012 the serial No had been updated from 12 bit to 16 bit Login And Preview verify 8447 Please Click Enter Guide if you wisit first Register Download Web Get Password Pic 5 7 interface of log in by device Input the serial number of device and the verify code to monitor and control the device directly 3 NETSuvexillance WEB Microsoft Internet Explorer WFE AmE Se Wwe A TAT AB ap ar OAE AAG AR eee O a gt LI Es e HE o El http fxmeye net videofindex jsp mac 00eel2edi3echusername admin pas word 2 g SES gt NetSurveillance CAMO1 CAMO2 CAMOS3 CAMO4 CAMOS CAMOE6 CAMO CAMOS CAMO9 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 0000000000000000 0000000000000000 0000000000000000 CAM16 SD Internet Pic 5 8 monitor page log in by device 85 Di 6 FAQ and maintenance 6 1 FAQ lf the problems are not listed please contact the local service or call the HQ service We are willing to offer the service 1 The DVR can not boot up normally Possible reasons are as followed 1 The power supply is not correct 2 Switch power supply line is not in good connection 3 Switch power supply is damaged 4 The program updating is wrong 5 The hard disk is damaged or the hard disk lines are broken 6 The front panel is damaged 7 The main board of the DV
4. Read Write Normal Read Write Normal 2 l K N Read Write Normal Redundant Read only Read Write Normal Read Write Normal Format Disk Read Write Normal Recover Read Write Normal 2 3 4 e 6 P artition Cancel Pic 4 46 HDD manage 4 5 2 Account Manage the user purview Note 1 The character length is 8 bytes at most for the following user and user team name The blank ahead or behind the character string is invalid The middle blank in the character string is valid Legal characters include letter number underline subtraction sign dot EnA 2 There is no limit in the user and user group You can add or delete the user group according to user definition The factory setup include user admin You can set the team as you wish The user can appoint the purview in the group 3 The user management include group user The group and user name can not be the same Each user only belongs to one group Status Modify User O admin admin GUI wm C guest user Normal MOE SOTO E default user Default Use Modify Password Add User Ade rouj Delete User Pic 4 47 account management Modify User Modify the existed user attribute Modify Group Modify the existed team attribute Modify Password Modify the user password You can set 1 6 bit password The blank ahead or behind the char string is invalid The middle blank in the char
5. 5 53 OI Main Menu gt System gt NetService gt EMAIL Enable kl SMTP Server Your SMTP Server ort 25 Need SSL User Name Password Sender Receiver Title Alarm Message OK Cancel Picture 4 25 EMAIL SMTP server Email server address It could be an IP address or domain name Domain name can be translated only it is the correct DNS configuration Port Email server port number SSL Decide whether using Secure Socket Layer protocol to login User Name Apply the email server user name Password Input the password corresponding to the user Sender Set the email sender address Receiver Send the email to appointed receivers when the alarm is turned on You can set three receivers at most Title You can set as you wish IP Filter setup When choosing the white list only the listed IP address can connect the DVR The 64 IP addressed are supportive in the list When choosing the black list the listed IP address can not connect the DVR The 64 IP addressed are supportive in the list You can delete the set IP address by y in the options Note When the same IP address is in the white and black list at the same time the black list precedence is higher 54 W Main Menu gt System gt NetService gt IP FILTER Enable Se O Banned IP OK Cancel Picture 4 26 IP FILTER DDNS Main Menu gt System gt NetService gt DDNS DDNS Type CN99 ig Ena ble OK Cancel P
6. Resume setup state common setup code setup recording setup Restore alarm setup network setup network service preview playback serial port setup user management Upgrade upgrade with external device like USB device hardware configuration and message Export the device s log or configuration to external device like USB Import Export flash disk Input the configuration with external device like USB flash disk Hard disk Display hard disk capability and recording time information BPS Display code stream information System Log information Clear all log information according to the log video and time information Edition Display edition information information 30 D Logout shut down or reboot Note T series have no shut down Shut down function 4 2 Record Operations related to record including Record Playback Backup Screen shot only Hybrid mode and full analog have 4 2 1 Record Configuration Set the recording parameters in the surveillance channel The system is set 24 hours consecutive recording in the first startup You can enter main menu gt recording function gt recording setup to set Note There is at least one read write hard disk refer to chapter 4 5 1 wee Main Menu gt Record gt Record Config Channel I Redundancy Length 60 min PreRecord 5 Record Mode Schedule Manual Week Thu Ze letect Alarm Period 1 DO gar ka eriod 2 DOS P Period 3 OO p L eriod 4 o
7. Note only analog channel can set channel name region configuration cover time title channel title fold Set channel PTZ protocol address baud rate date bit stop bit check PTZ Note Hybrid mode shows PTZ configuration T series have no this configuration function RS485 Set serial port function baud rate date bit stop bit check Device Note Full digital mode shows RS485 Device Serial port Set serial port function baud rate date bit stop bit check Configuration Note T series have no this function RS232 Set patrol mode and interval time Set Spot tour mode and time interval Spot Note only partial products of 6000 series support 5 29 T Set channel mode check channel status and configure the digital Digital channel etc Note only HVR and 6000 series support Hard disk Set appointed hard disk as read write disc read only disc or redundant disc clear data resume date and so on management User Modify user team or password Add user or team Delete user or team management Break the connection with the already login user Lock the account Online user after break until booting up again Adjust upside downside nearside starboard distance black margin Output adjust vertical horizontal Note only analog channel have black margin vertical amp horizontal Automatic Management Set automatic reboot system and automatic deleting files tools maintenance
8. Set the system parameters such as General Encode under Hybrid full analog mode Network Net service GUI display PTZ configure RS485 device RS232 Tour setup Spot and digital 5 47 Tl 4 4 1 General 4 Main Menu System Time Date Format Time Format Language HDD Full DVR No Video Standard Auto Logout Machine Name gt System gt General 2001 01 12 20 21 50 YY YY MM gt Date separator 24 HOUR ENGLISH Overwrite 0 PAL 0 LocalHost KA k F oT min OK Cancel Picture 4 17 General setup System time Set the system data and time Date format Choose the data format YMD MDY DMY Date Separator Choose list separator of the data format Time Format Choose time format 24 hour or 12 hour Language support 29 language at present Arabic Czech English Finnish Greek Indonesian Italian Japanese Portuguese Russian Thai T Chin ese S Chinese Turkish Brazilian Bulgarian Farsi French German Hebrew Hungarian Polish Romanian Spani sh Swedish Vietnamese HDD full Choose stop record Stop recording when the hard disk is full hard disk is full Choose overwrite Cover the earliest recording files and continue recording when the DVR No Only when the address button in the remote controller and the corresponding DVR number is matched the remote operation is valid Video Standard PAL or NTSC Auto Logout Set the latency time in 0 60 O
9. and credible 28 a H The signal and shield lines should be firm and connected credible which avoid false and joint welding and oxidation 2 6 2 Video output connections and options The video output is divided into PAL NTSC BNC 1 0Vp p 750 and VGA output selective configuration When replace the monitor by the computer display there are some issues to notice 1 Do not stay in the turn on state for a long time 2 Keep the computer display normal working by demagnetizing regularly 3 Stay away from the electro magnetic Interference TV is not a credible replacement as a video output It demands reducing the use time and control the power supply and the interference introduced by the nearby equipments strictly The creepage of low quality TV can lead to the damage of other equipments 2 6 3 SDI video input Only part models of 6000 series support SDI encode for 1080P 2 6 4 Audio signal input Audio port is BNC connection The input impedance is high so the tone arm must be active The audio signal line should be firm and away from the electro magnetic Interference and connected credible which avoid false and joint welding and oxidation The high voltage current should be avoided especially 2 6 5 Audio signal output Commonly the output parameter of DVR audio signal is greater than 200mv 1KQ BNC which can connect the low impedance earphone and active sound box or other audio output equipments through power amplifier
10. means no latency time Machine Name Can setting the device s name DST Choose the summer time option and pop the dialog box as followed AQ T OST Enable Day of Week jate Start Jan Mon 7 01 01 End Jan f Mon oh 01 Picture 4 18 DST week D Enable Day of Week Date Start E 01 01 01 01 End a 01 01 07 01 Picture 4 19 DST date 4 4 2 Encode setup only 6000 series and HVR other products only have analog channel under Hybrid mode full analog mode it has encode setup function encode settings is for analog channel only Set the video audio code parameter video file remote monitoring and so on Set every main stream parameter in the left part and set the extra stream parameter in the right part Note extra stream introduces video compression technique which was applying for multi channel playback simultaneously Dial up multi channel real time monitor under poor bandwidth or mobile monitor and so on 5 40 TH E Main Menu System gt Encode Channel dl Compression H 264 dd Resolution CIF 352x288 Frame Rate FPS 25 Bit Rate Type VBR Quality Good Bit Rate Kb S I Frame Interval 2 Video Audio Advanced i OK 7 Cancel Picture 4 20 Encode setup Independent channel code setting Channel Choose the channel number Compression Standard H 264 main profile Resolution Resolution type 1080P 720P 960H D1 HD1 CIF QCIF Frame Rate P 1 frame s 25 fr
11. on The video file type is M Alarm Trigger the external alarm signal in the set time section When above alarm is set as opening recording the detection recording state is on The video file type is A Note Refer to chapter 4 3 to set corresponding alarm function 4 2 2 Playback Refer to chapter 3 5 2 4 2 3 Backup You can backup the video files to external storage through setup Note The storage must be installed before the file backup If the backup is terminated the already backup can playback individually 432 W Ed sdb1 USB DISK 528 06 MB 1 66 GB Picture 4 2 Backup Detect Detect the storage connected with the DVR such as hard disk or universal disk Backup Click backup button and the dialog box is popped up You can choose the backup file according to the type channel and time Type Channel Start Time 2001 R 288 00 KB 2001 01 11 22 16 19 22 17 17 R 5 22 51 40 R 7 18 MB 2 1 2001 01 11 22 17 55 22 51 E 4 Required R emaining 3 22 MB 528 06 MB Backup format Picture 4 3 Backup Remove Clear the file information Add Show the file information satisfying the set file attributes 233 1 Backup format configurate the backup file format according to require can choose Start pause Click the play button to start the backup and click the pause button to stop the backup Note During backup you can exit the page layout to carry out
12. other functions Burning the file will be burned synchronously after click it Erase Choose the file to delete and click erasure to delete the file Stop Stop the backup 4 2 4 Snapshot Storage Note part products have this function Setup snapshot parameters for different channels At first time it s set for 24hours snapshot continuously please go to Main Menu Record Snapshot Storage for appropriate setting Note lf normal snapshot storage please setup snap at Main Mend advanced snapshot please refer to chapter 4 5 1 HDD Manager a Main VMenu gt Record gt snapshot Conf Channel 171 ds PreSnap 2 Pictures Mode schedule Manual Stop Week Regular Detect Period 1 Period 2 Period 3 Period 4 Advanced OK Cancel Picture 4 2 snapshot storage Channel Select the related channel to set click all to set all channels Presnap1 Setup presnap picture quantity before recording default is 5 pieces Record Set record status Schedule Manual and Stop E 34 W Schedule Realise snapshot according to record type regular detect and alarm and period Manual No matter what the present channel is in a state once choose manual button it will have snapshot at related channels Stop No matter what the present channel is in a state once choose stop button it will stop snapshot at related channels Period Set normal record period it only startup Snapshot Storage at set period Type Three types re
13. password 13 W SYSTEM LOGIN User Name ladmin Password Please Login OK Cancel Picture 3 1 System Login Password protection If the password is continuous wrong three times the alarm will start If the password is continuous wrong five times the account will be locked Through reboot or after half an hour the account will be unlocked automatically For your system security please modify your password after first login 3 4 Preview You can right click mouse to choose the switch between the windows The system date time and channel name are shown in each viewing window The surveillance video and the alarm status are shown in each window Table 3 1 Preview icon 3 5 Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu as the picture 3 2 shows The menu includes main menu record mode playback PTZ control High Speed PTZ Alarm Output color Setting Output adjust Logout view mode shift spot Only partial model of 6000 series support Spot 514 1 a Main Menu amp Main Menu 5 Record Mode 5 Record Mode PlayBack PlayBack PTZ Control PTZ Control HighSpeedPTZ Alarm Output HighSpeedPTZ E Alarm Output Output Adjust Output Adjust Logout Logout O View 1 ae O View 4 O View 1 SOS O View 4 5 ES View 9 Li View amp EI View 16 View 9 Spot Shortcut menu in full analog DVR Hybrid HVR mode Main Menu B Main Menu
14. remote channel title from the device that you want to connect remotely Stream Default is main stream do not support extra stream at present Device address IP address of device Port Default is 34567 User name Default is admin Remark click search will show all the devices that searched out user can choose any of the device that you like Remote access configuration RW Configur name chConfigo2 Device Type IPC Protocol Remote access Stream Main Stream Device address 10 2 4749 _ Port FT Username admin Password LocalHost 00 44 22 55 66 22 LocalHost O0 10 00 01 75 7 LocalHost 00 44 22 22 44 22 LocalHost Pic 4 45 the device list searched under remote channel setting 5 69 Tl Channel Status channel status is to show the status of all the digital channel When there is what existing status including Max Resolution This Resolution Connection Status For example The channel status for 4 2 mode is as below EA Y Channel Max resolution This Resolution Connection Status Connected Lar a Channel Max resolution This Resolution Connection Status Connected Channel status interface under full digital NVR mode One of the channel without device 70 W gaChannel status x Channel Max resolution This Resolution Connection Status FOAx576 Connected FOAx576 Connected 404x576 Connected YOA Connected Connected 928x576 Connected Remark when the current
15. string is valid Note The user who possess the user control purview can modify his her own or other users password Main Menu gt Advanced gt Account gt Modify Pass User Name ladmin te o sl New Confirm E Yi Pic 4 48 modify password Add user Add a user in the group and set the user purview Enter the menu interface and input the user name and password Choose the team and choose whether cover using the user Cover using means that the account can be used by multiple users at the same time Once choose the team the user purview is the subclass of the team We recommend that the common user s purview is lower than the advanced user wi Main Menu gt Advanced gt Account gt Add User User Name Kcuseable U croup amin 7 EN Authority Shutdown the device Channel Title Schedule Backup HDD Management PTZ Control Pic 4 49 Add User Add Group1 Add a user group and set the purview There are 33 different purviews shut down the equipment real time surveillance playback record setting video backup and so on ARES FEST TAE VE FR PTS Main Menu gt Advanced gt Account gt Add Group Authority Channel Title 1 Schedule H Backup 1 HDD Management A PTZ Control 1 Account Query System Info ES Query Log Info a Clear Log 74 H Pic 4 50 add group Delete User Delete the current user Choose the user and click delete user button Delete Group Delete the current
16. the alarm is turned on Note Set in the NetService and send email FTP upload to tick it the video picture of related record channel amp snapshot channel will be uploaded to assigned position 38 Y Note FTP upload need be set at Netservice Buzz When alarm happens device will come out with buzz 4 3 2 Video Blind When the video image is influenced by the environment such as bad brightness or reaching the set sensitivity parameter the camera mask function is turned on and the linkage function is turned on Game as motion detect function video blind is different between Hybrid mode amp Full digital mode Digital channel not only to enable video blind function at local side but also to enable the remote device that was connected when remote device with video blind local side will start alarm recording otherwise this function is not enable Hybrid mode only need to enable video loss function at local side Note Advanced button is the same as right click Main Menu gt Alarm gt Video Blind Channel 3 Enable sensitivity Middle hi Period Set Alarm Output Delay cord Channel p H e Activation Set Delay S now du essa g p en d E Mie Buzzer FTP upload Advanced OK Cancel Video Blind in Hybrid mode 5 39 W SOMain Menu gt Alarm gt Video Bli Channel 3 Period Alarm Out D ul Record Channel Tour PTZ Activation P Ser Delay 10 show Message Send E
17. 0000002 1 System Y4 00 R10 00000002 1 Build Date 2012 10 26 09 00 26 Build Date 2012 10 26 09 00 26 MAC 260040620002 MAC 260040620002 SerialN 28822101bdb62d13 SerialNo 28822101bdb62d13 Status 209 Status 209 Nat status Probing DNS Nat status Connected Nat status code 0 Nat status code 2 202 130 112 247 Connect failed interface successfully connect interface Pic 5 1 cloud technology server connection status gt Log in cloud server Visit http xmeye net to see below log in page it devided into two mode by user and by device user can base on their need to log in freely Remark to log in by user the user need to register at the first time a 81 W a amp O vk NM Ee 1 The firmware released after Sep 28th 2012 the serial No had been updated from 12 bit to 16 bit Login And Preview Username Password verify 3616 O Remember Please Click Enter Guide if you visit first Register Download Web Get Password gt Log in by user Customer use their registered user name and password to log in will see below interface Ey Devices En ke EI E E RE 267 TIAO gt bi goesesesosessoseseosossosooecsoocoseceososesesososessoseey My Devices Device Manage User Info Logout Click My Devices to view config and playback It will download the component automatically to your computer Please wait a moment as it will take several minitues on your first vis
18. 8 12 10 32 38 Save Configuratio Location 2010 08 12 10 32 38 Save Configuratio Regular 2010 08 12 10 32 39 Shut Down 2010 8 12 10 32 33 Pic 4 60 Log information 4 6 4 Version Display the basic information such as hardware information software version issue date serial number NAT status and so on 7 Main Menu gt Info gt Version N Record Channel 8 Extra Channel 0 Alarm In z Alarm Output 1 System V4 00 R10 00000002 1 Build Date 2012 10 26 09 00 26 MAC 260040620002 SerialNo 28822101bdb62d13 Status 209 Nat status Connecting Nat status code 1 202 130 112 247 Pic 4 61 version information 4 7 Shut down system Refer to chapter 3 5 8 80 H Chapter 5 Cloud Technology Basic Operation 5 1 Cloud technology monitor Cloud technology make the device one step on net greatly bring convenience for customer to monitor via wide area network this technology is using the serial no to visit device Remark the device that using cloud technology should be in the WAN Wide Area Network firstly gt Check the connecting status of cloud technology Connect device to WAN firstly then enter Main menu gt Info gt Version to check whether the device successfully connect to the cloud server or not A Main Menu gt Info gt Version A Main Menu gt Info gt Version Record Channel 8 Record Channel 8 Extra Channel 0 Extra Channel 0 Alarm In 8 Alarm In 8 Alarm Output 1 Alarm Output 1 System V4 00 R10 0
19. AA 50 AS Ton IP 51 e SEET en HOW ei EE 53 AE ROOM E 53 A Tute e Ee 53 A Ree Re eR E ee ee Error Bookmark not defined AA E r I E E A E E A E E E A A E a A E E Error Bookmark not defined A E isos aaa ae a ee ees 49 SEN Te EE 61 4 4 4 NetSevice ccccccccccccccceeeseceecceeesceeeceesnseceecseeeseceeeeseusseeeeesaaseeceeesaaueeceeeseeaaeceeessaaeeeeeeesaaaees 62 AS GURDI DY eege 71 44o PIA RSI EE 72 e A A 74 A ne ao a o e alo la eL dE 75 EE Error Bookmark not defined AAA o OO CO E ee cern renn tT 76 tg Vie 82 4 5 1 HDD Manage 82 A ee TE Error Bookmark not defined 433 OMNE meAQ P ro o EU O A 85 Ao Ee A A 86 gea e BEE 86 O O O mieg err E EE E E E E FEE O dog rantatrioneantens 86 Ao EE ee 87 D Re A ite A O A 87 4 5 9 Import Output occccccnccccccconnccnnnnccncnnonnnccnnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnrrnnnnnninnnnnnas 87 AA eee E E ee ee ee cree ee eee ee ree eee eer eee eee 88 4e FD DMO EE 88 EE 89 A Oaa A 89 POE V OTSO EE 90 AN OMUL OCW SY RE 90 SAW CIOUA IDASIG OS FA e WE 91 6 FAQ and maintenance onoaaaaaaannnnnnnnnneenenosssrnnnnnnrrrnrrrrrenrosssnnnnnnnrrnrrrrrreroosssnnnnnnnrrrrrrrrreeeoneennnn annn een 96 ORT A EE 96 6 2 E Ma E NGE EE 102 Appendix 1 Remote controller operation cooonccccoconcnnccconcnnnconconcononcnnoonannnnnnnnnnnconancnnnnnannnnnnnnrnnnnnaness 103 Appendix 2 Mouse operaton EEN 104 Appendix 3 Hard Disk capacity calculation
20. If the sound box and the tone arm can not be isolated howling phenomena is often existed There are some methods to deal with the above phenomena 1 Adopt better directional tone arm o S 2 Adjust the sound box volume to be under the threshold that produces the howling phenomena 3 Use fitment materials that absorb the sound to reduce reflection of the sound 4 Adjust the layout of the sound box and the tone arm 2 Alarm input and output connections Before connecting the device please pay attention to follow situations note T series have no alarm input output functions 1 Alarm input A Alarm input is grounding alarm input B Alarm input demand is the grounding voltage signal C When the alarm is connected with two DVRs or connected with DVR and other equipments it should be isolated by relay 2 Alarm output Alarm output can not be connected with high power load no more than 1A When forming the output loop it must prevent the big current from relay damage Use the contact isolator when there is a high power load 3 PTZ decoder connections A The grounding of the PTZ decoder and DVR must be shared otherwise the common mode voltage will lead to the PTZ control failure The shielded twisted pair is recommended B Avoid the entrance of high voltage Make the layout reasonably Take precaution from the thunder C In the outlying end connect 1200 resistance paralleled to reduce the inflection and insure the signal qu
21. R is damaged 2x The DVR reboots automatically or stops working after boot up a few minutes Possible reasons are as followed 1 The input voltage is not stable or too low 2 The hard disk is damaged or the hard disk lines are broken 3 The power of the switch power supply is low 4 Frontal video signal is not stable 5 Bad heat radiator or too much dust or bad running circumstance for the DVR 6 The hardware of the DVR is damaged 3 System can not detect hard disk Possible reasons are as followed 1 The hard disk power supply line is not connected 2 The cables of the hard disk are damaged 3 The hard disk is damaged 4 The SATA port of main board is damaged 86 Y L 8 There are no video outputs in single channel multiple channels and all channels Possible reasons are as followed 4 2 3 4 5 The program is not matched Please update the program The image brightness is all 0 Please restore the default setup There is no video input signal or the signal is too weak The channel protection or the screen protection is set The hardware of the DVR is damaged Real time image problems such as the image color or the brightness distortion Possible reasons are as followed 4 4 When using the BNC output the option between the N mode or PAL mode is wrong and the image becomes black and white The DVR is not matched the monitor impedance The video transmission distance is too far or the loss of the
22. Record Mode b Record Mode PlayBack PlayBack PTZ Control PTZ Control Ku HighSpeedPTZ 9 HighSpeedP TZ Alarm Output k ogee Output Adjust Output Adjust B Logout st stn DView 1 O View 1 View 4 G View 4 Spot Shortcut menu in full digital NVR mode Picture 3 2 Shortcut Menu compare to analog hybrid mode s shortcut menu the full digital mode do not have color setting function 3 5 1 Main menu When you login the system main menu is shown as below 15 Tl E Main Menu Advanced Cancel Picture3 3 Main Menu 3 5 2 Playback There are two methods for you to play the video files in the hard disk 1 In the desktop shortcut menu 2 Main menu gt Record gt Playback Note The hard disk that saves the video files must be set as read write or read only state 4 5 1 OO 5000000OoCc OOO O OOOO amp i eh x ARA e K EN CETATI oO oO e G 5 DO ab ub ad wb wf v i w D EE DIDDII bk 3 Picture 3 4 video playback 1 Playback control 2 Operation hint 3 file searching 4 listed files 5 file information Listed files Look up the listed files that accord with the searching criteria File information Look up the found file information 5 16 Playback control See detail in below chart Key Function key Funston Play Pause Ge Backward play Slow forward ava Fast forward Previous frame i Next frame LR Picture 3 5 Playback control
23. SECULINK 1004Z 1008Z 1016 Z User s installation and operation Manual Important Safeguards and Warding Do not place heavy objects on the DVR Do not let any solid or liquid fall into or infiltrate the DVR Please brush printed circuit boards connectors fans machine box and so on regularly Before the dust cleaning please switch off the power and unplug it Do not disassemble or repair the DVR by yourself Do not replace the components by yourself Environment Please place and use the DVR between 0 Cand 40 C Avoid direct sunlight Stay away from heat source Do not install the DVR in the damp environment Do not use the DVR in smoky or dusty environment Avoid collision or strong fall Please insure the DVR level installation in a stable workplace Please install in ventilated place Keep the vent clean Use within the rating input and output scope Directory 1 Production Introcduchon arannana aAa Error Bookmark not defined Mel G re te er de VIS AAA AEE A 4 1 2 Main functions ccooccconcnccncnccncnconancnnnnnnnnncnnnnnnnnnnonnnnnnnnnnnarcnnnnnanannnnans Error Bookmark not defined 2 Open package check and cable CONNECTIONS ccccccsssseececcceeseccceccaessececcceausecececseaseeeesesaaueeeesssaaaseeess 5 2 1 Open package check eeen 5 Ze Hara ais e CTT tel iia 7 23 Frame nstalalO Naron adds Error Bookmark not defined e ce ee ne 10 e PANG aea aa a ett tle eee teeta eta tet a 7 2 6 Audion and video inprut and out
24. VR The region shelter or channel protection is set The user has no surveillance purview The real time image of the hard disk recording machine itself is not clear 15 Network connection is not stable Possible reasons are as followed 4 2 3 4 Network is not stable IP address is conflicted MAC address is conflicted The net card of the DVR Is bad 16 There is something wrong with the USB backup or writing a CD Possible reasons are as followed 5 89 Ti 17 18 19 20 5 The rewritable machine and the hard disk are shared the same data lines The data is too much Please stop recording and backup The data exceeds the backup storage The backup equipment is not compatible The backup equipment is damaged The keyboard can not control the DVR Possible reasons are as followed 1 2 4 The serial port of the DVR is not set correctly The address is not correct When multiple transformers are connected the power supply is not large enough Please give each transformer individual power supply The distance Is too far Alarm can not be recessional Possible reasons are as followed 4 2 3 4 The setting of the alarm is not correct The alarm output is turned on manually The input machine is damaged or the connections are not correct There are some problems for specific program edition Please update the program Alarm is not working Possible reasons a
25. Z begins to rotate horizontally relative to the original position of the camera Click the Stop button to stop 6 Rotate Click on horizontal Rotating button PTZ turn around 7 Reset PTZ restart all the data clears to 0 8 Page Shift In Picture 3 12 click Page Shift button into Picture3 16 setting auxiliary function Auxiliary number corresponding to auxiliary switch on the decoder PTZ Control 05 Direct Aux Ope Light Open Close Aux Num Ope 1 Open Close Page Switch Picture 3 16 Auxiliary Function Control Intuitive Auxiliary Operation choose auxiliary equipment select Open or Close button switch control Auxiliary Number The operation of corresponding auxiliary switch according to PTZ agreement Page Shift In Picture 3 16 click Page Shift button enter the Picture 3 17 PTZ Main Menu the menu itself can be control by the menu control buttons 3 5 6 Color setting color setting only apply for Hybrid HVR full analog DVR mode and only analog channel can setting Set the selective image parameters current channel for single window display and cursor place for multi window display You can use the desktop shortcut menu and enter the interface The image 24 parameters include tonality brightness contrast saturation You can set different parameters at different time sections Color Setting 05 Period Brightness Contrast Saturation Hue Gain Horizon Sharpness Ver
26. a line call scan PZT repeat operation according to the route 1 Boundary Scan setup Set a period of horizontal curve for PTZ search path the steps are as follows Step1 In Picture 3 10 click Direction button to turn the PTZ to preset direction then click Setup button enter Picture 3 15 select the left boundary return to Picture 3 10 Step2 Please click direction arrows to adjust PTZ direction click Setup button enter Picture3 15 then select the right boundary return to Picture 3 10 Step3 Complete setup that is the position of left and right boundary Note when the left and right scan in one horizontal the PTZ will cycle rotate from left scan along the reverse direction to the right scan When the left and right scan not in the same horizontal the PTZ will regard the end of horizontal line which connect to left scan as right scan cycle rotate from left scan along the reverse direction to the right scan PTZ Config Function Preset Preset interval Left Right scan setting button Tour Pattern Patrol No y wegen eg act gt Line scan button Border Left e eR Picture 3 15 Boundary Scan Setup 2 Boundary Scan Calls In Picture 3 10 click Page Shift button then enter PTZ control menu as shown in Picture 3 12 Please input the number of scan in the value blank then click Scan button PTZ begins to work on the scan line Click Stop button to stop 23 Tl 5 Horizontal Rotating Click Horizontally Rotating button PT
27. ality D The 485 AB lines of DVR can not connected with other 485 output equipments paralleled E The voltage between the AB lines of the decoder must be less than 5V 4 Front equipment grounding note Bad grounding can lead to the burnout of the chip 5 Alarm input type unlimited The DVR alarm output port is constant opening type E eight external alarm interface oa YE f 1 234 1 alarm input 1 2 3 4 2 ground 3 RS232 4 RS485 5 alarm input 5 6 7 8 6 ground 7 alarm output sixteen external alarm interface A 3 4 d D 7 8 av eisalarm input 207ground alarm output 5RS485 4RS232 ram O o A B 485communciate interface which is connected with the recording control equipments such as the decoder 10TH 2 7 1 Alarm input port specification 8 channels alarm input Alarm input type unlimited The grounding and the com port of the alarm sensor are parallel The alarm sensor is external power supply The grounding of the alarm and the DVR should be shared The NC port of the alarm sensor must be connected with the DVR alarm input port The grounding of the power supply and the alarm sensor must be shared when used in external power Supply 2 2 Alarm output port specification 2 channels alarm output There is external power supply when using the external alarm equipment Please refer to the relay relevant parameters to avoid the overload that damages main machine 2 3 Alarm output port re
28. ame s N 1 frame s 30 frame s Bit Rate Type You can choose limited code stream or variable code stream When you choose the variable code stream there are six image quality options under the limited code stream you can choose the code stream manually Bit Rate Set the code stream value to modify the image quality The larger code stream value the better image quality 1080P 1024 8192kbsp 720P 1024 4096kbps 960H 869 4096kbps D1 512 2560kbps HD1 384 2048kbps CIF 64 1024kbps QCIF 64 512kbps Frame Interval can choose the range 2 12s Video Audio 1 When the icons are all in reverse displayed the video file is video and audio multiplex stream Extra stream Settings Extra stream is used for client side monitoring A mobile monitoring Channel title select channel title and then to choose whether need enable video A audio The resolution frame rate bit rate type settings is the same as main stream 50 DI 4 4 3 Network setup Main Menu gt system gt Network Net Card Wire Netcare DHCP Enable IP Address 192 168 10 subnet Mask 755 2755 192 168 Primary DNS 192 168 secondary DNS 8 8 Media Port 34567 AIIP Port 80 AS Download Transfer Policy Quality Prefe OK FP Cancel Picture4 21 Network Net Card You can choose cable network card or wireless network card DHCP Enable Obtain IP address automatically not suggested Note DHCP server is preinstalled IP address Set the IP a
29. ard disk is broken down means that there is no hard disk If the user need to change the damaged hard disk you must shut down the DVR and take up all the damaged hard disks then install a new one behind serial number means the current working disk such as 1 If the corresponding disk is 3 damaged the information will show 4 6 2 BPS Display the code stream Kb S and hard disk capability MB H in real time It displays as the wave sketch map f Main Menu gt Info gt BPS Channel Kb S Channel Kb S MB H 1054 9 1043 440 1054 10 1043 440 1054 11 1043 440 1043 2 1043 440 1043 13 1043 440 1043 E 1043 440 1043 I5 1043 440 1043 16 1043 440 Cancel Pic 4 59 BPS 4 6 3 LOG To search log information base on the set search mode Log information include system operation configuration operation data management alarm affair recording operation user management file management and so on Set the time section to look up and click the look up button The log information will display as a list one page is 128 items Press Page up or Page down button to look up and press delete button to clear all the log information 5 79 Tl f Gi Main Menu gt Info gt LOG N Type Start Time 2010 08 12 00 00 00 End Time Log Time 2010 08 12 10 31 49 Log In User default Log 2010 08 12 10 31 50 RecoverTime 2010 07 31 11 44 28 2010 08 12 10 32 30 Log Out User default Log 2010 08 12 10 32 30 Log In User admin Logli 2010 0
30. arm in out to be conveniently used for user a Main Menu gt Advanced gt Device Info Audio In Channels Alarm In Channels 8 Alarm Out Channels 1 GUI Theme General Remote control type General Maximum Playback large 4 Default playback large Enable RS232 M Enable PTZ Pic 4 56 device info 4 5 9 Import Export Users can export the log info and the configure file from device to connected flash stick and also can import related configure file from flash stick to settings which greatly bring convenience to the customers 77 Upgrade Cancel Y Main Menu gt Advanced gt Import Export Device Name 7 ele File Name Sat File Name File Name 4 57 Import Export interface 4 6 Info Display the hard disk information including HDD info code stream statistic log info version info 4 6 1 HDD info Display the hard disk state hard disk type overall capability residual capability the recording time and so on Main Menu gt Info gt HDD Info N Capacity Left Capacity Status Read Write 58 29 G 0 00 MB Normal Read Write 21 69 0 00 MB Normal Read Write 79 99 69 83 GB Normal Read Write 79 99 79 99 GB Normal Read Write 79 99 79 99 GB Normal Read Write 79 99 79 99 GB Normal Read Write 79 99 79 99 GB Normal Read Write 79 99 79 99 GB Normal Read Write 79 99 79 99 GB Normal View recording times 78 T Pic 4 58 HDD info Tips o means that the hard disk is normal X means that the h
31. boards connectors fans machine box and so on regularly 2 Please keep the grounding well done to prevent the video or audio signal interfered and the DVR from static or inductive electricity 3 Do not pull out the video signal line or RS 232 port or RS 485 port with the power on 4 Do not use the TV in the local video output port VOUT of DVR It will damage the video output circuit easily 5 Do not turn off the switch directly Please use the turn off function in the menu or press the turn off button in the panel 3 seconds or longer to protect the hard disk 6 Please keep the DVR away from heat resource 7 Please keep the DVR ventilated for better heat radiator Please check the system and maintain regularly 92 D Appendix 1 Remote controller operation HCL i Serial number Multi window Same function as Multi window button in the front button panel ios Numeric button Code input number input channel switch ni ei Same function as Esc button in the front panel nu Direction button Same function as direction button in the front panel 5 nengen Contoltherecor 6 Record mode Same function as Record mode 8 Jm Assistanttunoton O 93 D Appendix Z Mouse operation Take right hand as an exampl e The mouse in USB connection is supported Bee TI e Double click one item in the file list to playback the video Double click the playback video to zoom in or out the Double left click screen Double
32. button remove the preset PTZ Config x i Preset oint input Preset interval Tour Pattern Patrol No Border Sat Del Preset Picture 3 11 Preset Settings 2 Preset Point Calls In Picture 3 10 click Page Shift button enter PTZ control interface as shown in Picture 3 12 In the input blank write the preset points then click Preset button PTZ turn to the corresponding preset point 20 OI PTZ Control Preset Page Switch cancel Picture 3 12 PTZ Control 2 Cruise between Points Multiple preset points connected cruise lines call cruise between points the PTZ run around on the line 1 Cruise Between Points Settings Cruise lines is connected by multiple preset points setting procedure is as follows Step1 In Picture 3 10 the Direction key will turn PTZ to designated location click Settings button to enter Picture 3 13 Step 2 click Cruise buttons the write proper value into the Cruise Line and Preset Points blank then click Add Preset Points button complete setting also can add and delete cruise line which has been set up Step 3 repeat step1 and step2 until set out all the preset designated cruise lines Remove Preset Please input preset value in the blank click Remove Preset button then remove the preset points Remove Cruise Line Input the number of cruise line click Remove Cruise Lines button then remove the cruise lines set 21 x a Preset Points Function Preset 0 Pr
33. click the channel to make it full screen display double click again to resume the multi window display Left click Choose the according function in the menu Pop desktop shortcut menu in preview state Right click Current shortcut menu in the menu Add or subtract number in the number setting Press middle Switch the items in the combo box button Page up or down in the list Choose the widget or move the tem in the widget Set the motion detect area Drag mouse Set the cover area E 94 W Appendix 3 Hard disk capability calculation Make sure the hard disk installed to the DVR for the first time Pay attention to the IDE hard disk lines connection 1 Hard disk capability There is no limit for recording machine We recommend 120G 250G size to keep better stability 2 Overall capability option The hard disk capability formula is Overall capability M channel number time hour capability in an hour M hour The recording time formula is Recording time hour overall capability M gt Capability in an hour M hour channel number The DVR introduces the H 264 compression technology Its dynamic range is very large so the hard disk capability calculation is based on the estimation values of each channel creating files in an hour Example For one piece 500G HDD real time CIF for recording it will keep recording for about 25 days HDD Spaces per channel is 200M H if 4channels real time CIF at 24hours recording uninterrupted
34. d FTP upload Set alarm input channel equipment type linkage parameters Alarm defending time section alarm output screen hint recording screen input shot PTZ patrol buzz email and FTP upload Note T series have no this function Set alarm mode configuration manual shut down Alarm output Note T series have no this function Exception No HDD HDD error HDD capacity not enough network cut IP handling Conflict linkage parameters screen hint or buzz 28 T Set algorithm rule trajectory display sensitivity minimum pixel alert Intelligent mode and setting linkage parameters period alarm output the screen analysis prompt record PTZ tour buzzer EMAIL FTP upload Note 6000 series support this function General Set system time data format language hard disk full time operation configuration machine number video format output mode summertime stay time Set main extra coding parameter code mode resolving ability frame rate code stream control image quality type code stream value frame Encode between value video audio enable configuration Note only Hybrid mode and full analog mode have encode configuration Network Set basic network parameters DHCP and DNS parameters network configuration high speed download PPPOE NTP Email IP purview DDNS parameter Set channel title preview hint icon state transparency cover area time title channel title fold system GUI display
35. ddress Default 192 168 1 10 Subnet mask Set the subnet mask code Default 255 255 255 0 Gateway Set the default gateway Default 192 168 1 1 DNS setup Domain Name Server It translates the domain name into IP address The IP address is offered by network provider The address must be set and reboot then it works Media port Default 34567 HTTP port Default 80 HS Download Transfer Policy There are three strategies self adaption image quality precedence and fluency precedence The code stream will adjust according to the setup Self adaption is the tradeoff between the image quality precedence and fluency precedence Fluency precedence and self adaption are valid only when the assistant code stream is turned on Otherwise image quality precedence is valid a 51 W 4 4 4 NetService Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters Main Menu gt System gt NetService Net Server Net Server Info PPPoE 0 NTP 0 NTP 10 EMAIL 0 Your SMTP Server 25 IP FILTER 0 0 0 DDNS DDNS Set Invalid FTP 0 FTP ARSP 1 secu link com 15000 AlarmServer 1 192 168 0 101 Wireless Config Not enabled Mobile Monitor 0 34599 Wifi Not enabled RTSP 1 554 Cloud Enable ESTO FORT Cancel Picture 4 22 NetService PPPoE setup Main Menu gt System gt NetService gt PPPOE E
36. detect 4 3 4 Alarm input When the equipment obtains the external alarm signal the alarm function is turned on Al D Alarm input is the same between hybrid mode amp full digital mode function enable when it was set normal only need to connect alarm sensor at alarm input port on local side the alarm information is occurring and will link to related setting functions at the same time Note Advanced button is the same as right click Main Menu gt Alarm gt Alarm Input Alarm In ls Enable Type Normal Oj Period Set Interval H See Alarm Output 1 Delay 10 Sec 0008 60 E EEE EE Tour ELE EL eee e gar PTZ Activation P Ser Delay 10 Sec Show Message L send Email O Buzzer O FTP upload L Alarm input in Hybrid HVR mode Main Menu gt Alarm gt Alarm Input Alarm In AR ka to Is Enable Type Normal Op 7 Period Set Interval H See Alarm Output 1 Delay 10 Sec Record Channel 1 2 3 4 5 6 7 8 S fid Tour Stee ode PTZ Activation et 10 Sec Show Message O Send Email Buzzer E FTP upload 1 Alarm input in NVR mode Pic 4 10 Alarm input 5 42 Tl Set method refer to chapter 4 3 1 Motion detect 4 3 5 Alarm output Refer to chapter 3 5 4 4 3 6 Abnormal Analysing and inspecting current software and hardware of the device When some abnormal events happen the device will make a relative answer such as show message and buzzer a Main Menu gt Alarm gt 4bnor
37. device by mobile please make a router mapping of this port and use CMS to monitor and operate it by protocol Main Menu gt System gt NetService gt Mobil x E na ble Port OK A Cancel Picture 4 32 Mobile Monitor Setup Enable Select it to make sure abnormal function workable Port It s a port of mobile monitoring which you need to make a router mapping of if want to visit 58 D it by mobile UPNP UPNP protocol is to realize auto port forwarding on router precondition of using this function is to make sure the UPNP function of router is enabled Main Menu gt System gt NetService gt UPNP x Enable Make sure UPNP is running on router befor using this OK cance Picture 4 33 UPNP Enable Choose Enable to make sure all UPNP settings available HTTP Route will automatically distribute HTTP port for the device when IE viewing it need this port TCP Router will automatically distribute TCP port for the device when monitoring via CMS it need this port Mobile Port Router will automatically distribute Mobile Port for the device when mobile monitor it need this port WIFI DVR connect to wireless router via WIFI module then to visit it through IP address the precondition of using this function is to make sure the DVR have connected with WIFI modern E 59 W Authentication Signal OPEN Very Low Search Enable SSID Password IP Address subnet Mask Gateway OK Cancel
38. different switchable preview picture 3 6 0 Spot Only part products of 6000 series support this function the first BNC interface regard as Spot interface the user can switch to Spot output image segmentation mode through shortcut menu After connect to this BNC interface no matter what operation in VGA the TV only output the device s preview screen no GUI interface 26 T Preview in single window four windows sixteen windows according to your choice Note Different video input number have different preview screen 271 4 Main menu 4 1 Main menu navigation Set the recording configuration recording type recording time section playback Set recording search recording play video file storage Record Set screen capture period type etc Storage Note T series and 6000 series have no this function Detect backup device format device back the selective files set motion detect alarm channel sensitivity area linkage parameters Motion defending time section alarm output screen hint recording screen detection shot PTZ patrol buzz email and FTP upload Set camera mask alarm channel sensitivity linkage parameters Video defending time section alarm output screen hint recording screen blind shot PTZ patrol buzz email and FTP upload Set video loss alarm channel linkage parameters defending time We section alarm output screen hint recording screen shot PTZ patrol Alarm e buzz email an
39. e device of related channel was not selected 4 The selected device did not connect to video sources 5 The channel title of selected remote device is not exist 6 Stream for remote channel was set by extra stream 7 User name amp password not matched 8 directly input with IP address or port No incorrectly when adding device 9 The resolution of added device is too large to display by the monitor 25 Click search why not search out any of the device Possible reasons are as followed 1 There is no other device exist in the Local area network 2 The subnet mask setting incorrectly on Network settings 91 D 26 The snapshot at alarm function was enable why not catch picture Possible reasons are as followed 1 HDD manage without partition for snapshot 2 Partition for snapshot is O 3 The snapshot function is not enable on record gt storage of related channel 27 The time shows on digital channel is not the same as local side Enable the time synchronous function of digital channel 28 Can not see preview picture of analog channel Possible reasons are as followed 1 The camera did not connect to video interface 2 The device did not connect to video source 3 Video source is broken 29 Picture will be frozen when multi connection and shift devices Picture come out from digital channel need few seconds shift device means to show new picture so it needs several seconds to buffer 6 2 Maintenance 1 Please brush printed circuit
40. e return when alarm ends when alarm link to tour system will auto shift to six view after alarm finished Remark at preview mode click upper right icon f can turn on off tour mean turn on mean turn off 4 4 9 Spot configure Remark only part of 6000 series product can support this function To set TV tour display with sport port means enable mode tour you can choose single view four view nine view for single mode tour or hybrid mode tour When tour enables no matter what u operate on VGA side there is only the spot tour image output on TV side no GUI displayed Mam Menu gt System gt S3pot Set TY channel 1 Enable Tour amp Interval 5 View 1 View 4 Pic 4 41 Spot configure interval Set the patrol switch interval The set range is 5 120 seconds 4 5 0 Channel manage Remark only HVR and 6000 series product support this function Digital manage including digital channel channel status and channel mode Remark there is only analog mode if device is under full analog mode 66 DI e Main Menu gt System gt Digita Set channel mode 0 EI Channel status ChannelType Set the number of channel parameters Channel manage page under Hybrid HVR mode full digital NVR mode Pic 4 42 channel manage interface Digital channel 67 5 wd 11115 lint 1100 cence Channel Enable Time synchronization O Connection mode Single conne Network Configuration list Configur na
41. erimeter alert ltems care Algorithm rule at drop down DoxbAlcaele ULES to choose the algorithm rule of detection Rule choose different algorithm rules the related setting page is different Cordon gt Show traces tick it to enable when alarm triggers there will be red box around moving objects High Middle gt Sensitivity base on different requirement there are 3 options in the drop down box SL gt Minimum image distance range between 0 30 the more flexible the less image distance gt Alert way there are 2 kinds cordon and warning area Cordon Can set 3 prohibited directions bidirectional prohibited from top to bottom from left to right from bottom to top from right to left when the setting cordon is too slope show with from left to right from right to left otherwise will be from top to bottom from bottom to top when the moving object meet preset cordon rules the alarm will be triggered Warning area can set 3 kinds of prohibited directions bidirectional prohibited 5 44 D enter and leave when the moving object meet preset warning area rules alarm will be triggered gt Rules click setting enter rule setting page right click mouse choose add use mouse to fix two or more point and then connect them to form a line or a irregular region after that a box of prohibited direction options will come out choose one of them right click mouse click Yes return to previous page click Yes a
42. eset interval 3 D Cruise Button Tour Time interval Pattern Patrol No 1 Border Add Preset PTZ Config Del Preset Cruise Line Blank Del Tour Picture 3 13 Cruise Between Points Settings 2 The Calls of Cruise between Points In Picture 3 10 click Page Shift button enter PTZ control menu as shown in Picture 3 12 Please input the number of cruise in the value blank then click Cruise between Points button PTZ begins to work on the cruise line Click Stop button to stop cruise 3 Scan PTZ also can work on the preset scan line repeatedly 1 Scan setup Setting steps Step1 In Picture 3 10 click Setup button enter Picture 3 14 Step2 Click Scan button the input proper value in the scan value blank Step3 Click Start button enter Picture3 10 here you can set the following items Zoom Focus Aperture Direction and so on Click Setup button to go back Picture 3 14 Step4 Click End button to complete setup Click the right button of the mouse to exit PTZ Config A Scan value blank Function Pattern 1 Preset Interval Scan Button To ar A hia Border i Begin End Picture 3 14 Scan Setup 5 22 1 2 Scan Calls In Picture 3 10 click Page Shift button then enter PTZ control menu as shown in Picture 3 12 Please input the number of scan in the value blank then click Scan button PTZ begins to work on the scan line Click Stop button to stop 4 Boundary Scan In a horizontal line set up
43. group Choose the group and click delete group button f Main Menu gt Advanced gt Account gt Delete Group GROUP fuser y Name admin Memo fadministrator group Pic 4 51 Delete Group 4 5 3 Online user To check the information of network user that connected with local device also can tick the selected user to break up connection make y at the box then the user will be frozen after connection stopped and will not log in until device reboot User Name Login Type Pic 4 52 online user 75 W 4 5 4 TV adjust Refer to chapter 3 5 7 4 5 5 Auto Maintain The user can set the time to auto reboot and auto delete file vi al 01 00 OK Cancel Picture 4 39 Auto maintain 4 5 6 Restore The system restore to the default You can choose the items according to the menu Main Menu gt Advanced gt Restore Please select setting entries that you want to default Select all General Encode Record Config Alarm Set NetWork NetService GUI Display RS232 Account The Configuration of Channel Encoding Channel title Time title Regio nal Ci yverage V ideo Color OK Cancel Pic 4 54 restore to default 76 5 4 5 7 Upgrade Main Menu gt Advanced gt Upgrade Upgrade Position USB DISK Upgrade file bootfont bin Pic 4 55 Upgrade Upgrade choose USB interface Upgrade file choose the upgrade file 4 5 8 Device Info Provide device interface info like audio in al
44. gular detect and alarm Regular snapshot at set period Detect snapshot at set period when motion detect video blind and video loss which are preset for snapshot enable Alarm snapshot at set period when alarm in which is preset for snapshot enable Note for related alarm function please refer to chapter 4 3 4 3 Alarm Function Alarm functions include motion detect video blind video loss alarm input and alarm output abnormality intelligent analysis 4 3 1 Motion Detect When system detects the motion signal that reaches the set sensitivity the motion detect alarm is on and the linkage function is turned on Note Advanced button is the same as right click Motion detect function is different between Hybrid mode amp Full digital mode Digital channel not only to enable motion detect function at local side but also to enable the remote device that was connected when remote device detect motion movement local side will start alarm recording otherwise this function is not enable Hybrid mode only need to enable motion detect function at local side 5 35 OI lt A Main Menu gt Alarm gt Motion Detect Channel an E TA Enable Sensitivity Middle Middle Region Period Sat Interval H See Alarm Output i Delay 110 Sec Record Channel 1 2 3 4 5 S 78S iat si4t sig Tour VISTI SISTEMA PTZ Activation f Sel 410 Sec Show Message Send Email L Buzzer E FTP upload L Video detect i
45. icture 4 27 DDNS setup It is the abbreviation of dynamic domain name server Local domain name Provide the domain name registered by DDNS User name Provide the account registered by DDNS Password Provide the password registered by DDNS When the DDNS is successfully configured and start you can connect the domain name in the IE address column to visit Note The DNS setup must be configured correctly in the network setup FTP setup FTP is available only when alarm happens or alarm activates record and snapshot it will upload related record and snapshot pictures to FTP server 55 OI Main Menu gt System gt Ne tService gt FTP Enable User Name Password Picture 4 28 FTP setup Enable Click Enable then all settings will be available Server IP IP address for FTP server Port Domain Port of FTP default 21 User Name User name of FTP Password Password of user Anonymous 1 enable anonymous no need setting user name and password Max File Length Max length for upload files at every packed default 128M Dir Name The directory of upload file Note The user should be with authority to upload files ARSP Startup DDNS server to add devices and manage it in the DDNS server ARSP Type DNS Enable Server IP 192 168 1 112 Port 15000 User Name test Password ELTTI Update Period 1 OK Cancel Picture 4 29 ARSP 56 DI Type choose DNS Enable m means it is chosen Seve
46. inches space around in order to air s circulation 3 From bottom to shelf installation 4 When multiple components install in the frame please take preventive measures to avoid power socket overload 2 4 Front panel 2 5 Rear panel 2 6 Audio and video input and output connections 2 6 1 Video input connections The video input port is BNC connector plug The demand of input signal is PAL NTSC BNC 1 0Vp p 750 The video signal must be accorded with the state standard which has the high signal to noise ratio low aberration and low interference The image must be clear and has natural color in the appropriate brightness Insure the vidicon signal stable and credible The vidicon should be installed in the appropriate location where is away from backlighting and low illumination or adopts the better backlighting and low illumination compensation The ground and power supply of the vidicon and the DVR should be shared and stable Insure the transmission line stable and credible The video transmission line should adopt high quality coaxial pair which is chosen by the transmission distance If the transmission distance is too far it should adopt shielded twisted pair video compensation equipment and transmit by fiber to insure the signal quality The video signal line should be away from the electro magnetic Interference and other equipments signal lines The high voltage current should be avoided especially Insure the connection stable
47. it can last 500G 200M H 24H 4ch 26 days 95 W
48. iting time Pic 5 3 cloud technology operation interface Device manage Mainly use to add device click add to add the serial number of device to be monitored E 82 W Ki EL Devices Ze E 2 me y Dm 26 TAO My Devices Device Manage User Info Logout SerialNo Device Name Username Operation Pic 5 4 device manage interface gt EL Devices Ze We D J E NOD 26 TAO My Devices Device Manage User Info Logout SerialNo Device Nar Username admin default is admin E t fault is nu Pic 5 5 add interface at device manage Remark in pic 5 5 the user name means the user name of monitored device password means the password of related user My Device Mainly show all the added device here click the on line device name can access to control this device accordingly 83 Tl THE Se SEVU mu Tao hap Qa o ARO De tee eo SA PR ORB EHRE RAER er2323 er23232134 skjloy 1212 ER NAT x xE ss MES de ms AJEN M l tb __ o Internet Pic 5 6 monitor page log in by user Remark the icon of gt means offline the device do not connect to server successfully gt Login by device KEE i AR d AY ANY A V V N CVM MY AM V VAAN AV BAX SONOS V wh XW SS mA A gt EN EE
49. ividual hard disk which insures the audio and video signal stable synchronization Backup through SATA interface and USB interface such as USB equipment removable hard disk and so on through net download the files in the hard disk Playback B ES individual real time video recording as well as searching playback network surveillance recording check downloading and so on multi playback mode Zoom at arbitrary region Net operating through net tele surveillance in the real time tele PTZ control tele recording check and real time playback Alarm linkage Alarm activated video record tour message buzzer e mail ftp Communication interface RS5485 interface which fulfills the alarm input and PTZ control RS232 interface which can extend keyboard connection to realize master as well as with computer serial port connection for system maintenance and upgrade and matrix control and so on standard ethernet network interface which fulfills the telecommuting function Intelligent operating mouse action function fast copy and paste operating for the same setting 2 Open package check and cable connections 2 1 Open package check When you receive the DVR please check first First please check whether there is any visible damage to the package appearance he protective materials used for the package of the DVR can protect most accidental clashes during transportation Then please open the b
50. key Note play under frame by frame the playback status should be paused firstly Operation tips 1 show function of the key that cursor placed Special functions GS Accurate playback Input time h m s in the time column and then click plays button The system can operate accurate playback according to the searching time Local zoom When the system is in single window full screen playback mode you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom You can right click mouse to exit Note When current resolution of the channel is over Max resolution to playback this channel will show a Red X 3 5 3 Record Control DI 3 Please check current channel status o means it is not in recording status e means it is in recording status You can use desktop shortcut menu or click main menu gt recording function gt recording set to enter the recording control interface 175 Record Mode Record Mode All 2 Eh AS e ML A o O ae e E Ss dG Schedule A A 8 A A Manual Stop TEEN One Picture 3 8 Record Mode Schedule Record according to the configuration Manual Click the all button and the according channel is recording no matter the channel in any state Stop Click the stop button and the according channel stops recording no matter the channel in any state 3 5 4 Alarm output 113 3 Please check current channel sta
51. larm rules setting is finished Perimeter alert High Minimum image distance El Cordon Warning Area O a Rule Set FOR Cancel 7 Pic 4 13 rules setting cordon Items care gt Show traces tick it to enable when this function is triggered there will be read box shows around the moving object gt Sensitivity base on different requirement there are 3 options in the drop down box S z gt Minimum image distance range between 0 30 the more flexible the less image distance gt Alert way three modes Items stranded Items stolen Illegal parking ltems stranded object appears within warning area and the size of object meet the rules of minimum image distance alarm will be triggered Items stolen object disappears within warning area and the size of object meet the rules of minimum image distance alarm will be triggered Illegal parking this way is similar with Items stranded gt Rules click setting enter the setting page of rule right click mouse choose add use mouse to fix several points and then connect them to form a irregular region right click mouse click Yes return 45 Tl to previous page click Yes alarm rule setting if finished ei ltems care S Show Traces sensitivity ial Minimum image Alert Way n O tems stranded O items stolen shift Illegal parking Rule Set Pic 4 14 rule setting items care Video diagnosis gt Sensitivi
52. lay parameters Type JRC 27F rating 30VDC 2A 125VAC 1A resistance load 125VA 160W EEN isolation Homo polarity interface 1000VAC 1minute Inhomo polarity 1000VAC 1 minute Interface and winding 1000VAC 1 minute 1500VAC 10x160us longevity 50x106 MIN 3Hz 200x103 MIN 0 5Hz am 115 2 8 Speed dome connections 1 Connect the 485 lines of the speed dome with the DVR 485 interface the 485 interface of eight external alarm AN AIO All A pis ee NOZ R232 T232 y J AA de AA EY En SAA e te eem oe the 485 interface of sixteen external alarm 2 Connect the video line with the DVR video input 3 Electrify the speed dome 3 Basic operation Note The button in gray display indicates nonsupport 3 1 Turn on Plug the power supply and turn on the power supply switch Power supply indicator light shining indicates turning on the video recorder After the startup you will hear a beep The default setting of video output is multiple window output mode If the startup time is within the video setting time the timing video recording function will start up automatically Then the video indicator light of corresponding channel is shining and the DVR is working normally 12 Hh Note Make sure that the input voltage corresponds with the switch of the DVR power supply 2 Power supply demands 220V 10 50Hz Suggest using the UPS to protect the power supply under allowable conditions 3 1 Turn off There are
53. m Time Display Channel Title Record Status Alarm Status Deflick Transparency 175 Resolution 1920 1080 VGA p Channel 4 RH Region Cover L Time Display Channel Title The GUI display page under hybrid HVR mode and all analog DVR mode Main Menu gt System gt GUI Disp Time Display Channel Title Record Status Alarm Status Deflick Transparency 175 Resolution 1280 1024 VGA priority The GUI display page under full digital NVR channel a 61 W Pic 4 36 output mode Channel Title Click the channel name modify button and enter the channel name menu Modify the channel name The 16 Chinese characters and 25 letters are supportive Time Display means the selective state Display the system data and time in the surveillance window Channel display means the selective state Display the system channel number in the surveillance window Record Status means the selective state Display the system recording status in the surveillance window Alarm Status means the selective state Display the system alarm status in the surveillance window Transparency Choose the background image transparency The range is 128 255 Resolution set display resolution Channel Choose the set code output channel number Region Cover means the selective state Click the cover area button and enter the corresponding channel window You can cover the arbitrary using mouse Black region is fo
54. mail Buzzer FIF upload Advanced OK Cancel Video blind in full digital NVR mode Pic 4 8 Video blind Set method refer to chapter 4 3 1 Motion detect 4 3 3 Video Loss When the equipment can not obtain the channel video signal the video loss alarm is turned on and the linkage function is turned on Same as motion detect function video loss is different between Hybrid mode amp Full digital mode Digital channel not only to enable video loss function at local side but also to enable the remote device that was connected when remote device with video loss local side will start alarm recording otherwise this function is not enable Hybrid mode only need to enable video loss function at local side Note Advanced button is the same as right click 5 40 OI Main Menu gt Alarm gt Video Loss Period PP Alarm Output 1 Delay Io Sec Record Channel 1 2 3 4 5 6 7 8 S Oh Wi 24314 318 Tour EEEE EEE EEE E i PTZ Activation P Ser Delay 10 Sec Show Message O Send Email L Buzzer B FTP upload L Video loss in Hybrid HVR mode Main Menu gt Alarm gt Video Loss Channel 1 sl Enable Period set Alarm Output 1 Delay 10 Sec Record Channel 7 2 3 4 5 6 7 8 S id Tour IOS PTZ Activation MBA Delay 10 Sec Show Message O Send Email O Buzzer B FTP upload O Video loss in full digital NVR mode Pic 4 9 Video loss Set method refer to chapter 4 3 1 Motion
55. mality Event Type Enable Show message Buzzer Event Type No Disk Enable Le OK Cancel Picture 4 11 Abnormal No Disk Disk Error Disk No Space Met Disconnection selecting abnormity you want to inspecta lalii Select it to make sure abnormal function workable Automatically alarm cue dialog box come out of the main screen Device will have one long nosie di while alarm is happening 4 3 7 Intelligent analysis Note only part of product support this function at present To analyze the video image when system detect object that meet pre set algorithm rules and fit set flexibility and minimum image distance will trigger video analysis alarm and enable the linkage function only the 1 channel of full analog mode and hybrid mode can support this function and if 43 D this function is enabled then video blind is invalid Main Menu gt Alarm ntelligent Analysis Channel q Enable Algor Perimeter Rule Period Alarm Output Record Channel Tour GT E i 1 Dalay PTZ Activation ert Delay show Message send Email Buzzer FTP upload Advanced OK PF Cancel Pic 4 12 Intelligent analysis setting page Channel No only shows by 1 at present only the 1 channel with maximum resolution of 1080P in the full analog DVR mode and hybrid HVR mode Enable tick it to enable the video analysis function then can go for further setting P
56. me Device Type IP Address Remote acce chConfigO1 10 6 10 9 2 O chConfigO2 10 6 5 54 Single link page of digital channel CA eDigital channels Si Channel Enable Time synchronization Connection mode Multi link Polling time 10 Sec Network Configuration list O Configur name Device T IP Address Remote acce Multi linkage page of Digital channel Pic 4 43 digital channel interface Channel select channel title Enable 1 Open digital channel tick enable then can do related settings Time Synchronization Tick it means the time of this channel and device is the same Connection Mode can be singe connect or multi ink multi link modes can connect to several devices device will be tour displayed one by one tour interval can be set no less then 10s Delete If the user want to change device select the existing device click delete will be ok Add click add will come out below page to add new device 5 68 Tl Remote access configuration Configur name chConfigO1 Device Type PC Protocol TOP 7 Remote access 4 Stream Main Stream Device address 10 6 5 54 Port 34567 Username AS DeviceName MAC IP Address Port Pic 4 44 remote channel configure page Configure Name device is with default configure title user can revise it if necessary Device Type 3 types IPC DVR HVR user can choose as what you like default is IPC Protocol Default is TCP Remote channel User can input
57. n Hybrid mode R Main Menu gt Alarm gt Motion Detect Channel 4 sl Enable Period SEA Interval H See Alarm Output 1 Delay 110 Sec Record Channel 1 2 3 4 5 6 7 8 S fid Tour A aan PTZ Activation Set Delay Ho Sec Show Message J Send Email L Buzzer E FTP upload O Video detect in full digital NVR mode Pic 4 4 Channel Choose the set motion detect channel Enable m means that the motion detect function is on 36 Y Note Only the motion detect under hybrid mode full analog mode have this function of setting sensitivity and also only the analog channel can set region Region Click set to enter the set area The area is divided into PAL22X18 Red block means the motion detect defensive area White block means the unfenced area You can set the area as followed Drag the mouse and draw the area Default all selected blocks are detection area Note Only the motion detect under hybrid mode full analog mode have this function of setting region and also only the analog channel can set region Picture 4 5 Region Period 1 Trigger the motion detect signal in the set time section You can set according to week or set uniformly Each day is divided into four time sections means the set valid Sel saturday 00 00 E DU OU 24 00 24 00 00 00 24 00 Mon Tue Wed Thu Fr Les E Ges CU DE Cancel Picture 4 6 set the time section 37 Tl Interval Only one ala
58. nable Picture4 23 PPPOE Enable Reversem means choose setting can become effective Input the user name and password that ISP Internet service provider provides After saving it reboot up your system Then the DVR will build a network connection based on PPPoE The IP address will change into dynamic IP address after above operation is well done Operation After PPPoE dialing successfully look up the IP address in the IP address and obtain the current IP address Then use this IP address to visit the DVR through user port a 52 W NTP setup Main Menu gt System gt NetService gt NTP Enable min OK Cancel Picture 4 24 NTP The NTP server must be installed in the PC Enable Reverseamean choose setting can become effective Host computer IP Input the IP address installed NTP server Port Default 123 You can set the port according to NTP server Time zone London GMT 0 Berlin GMT 1 Cairo GMT 2 Moscow GMT 3 New Delhi GMT 5 Bangkok GMT 7 Hongkong Beijing GMT 8 Tokyo GMT 9 Sydney GMT 10 Hawaii GMT 10 Alaska GMT 9 Pacific time GMT 8 American mountain time GMT 7 American mid time GMT 6 American eastern time GMT 5 Atlantic time GMT 4 Brazil GMT 3 Atlantic mid time GMT 2 Update Period The same with the NTP server check interval Default 10minutes EMAIL setup If the alarm is turned on or the alarm linkage photos are taken send an email about the alarm information and the photos to appointed address
59. o Advanced OK Cancel Picture 4 1 Record Configuration Channel Choose the corresponding channel number to set the channel Choose the all option to set the entire channels Redundancy Choose the redundancy function option to implement the file double backup function Double backup is writing the video files in two hard disks When you do the double backup make sure that there are two hard disks installed One is read write disk and the other is redundant disk refer to 4 5 1 Length Set the time length of each video file 60minutes is default value Pre Record Record 1 30 seconds before the action time length is decided by the code stream Record mode Set video state schedule manual or stop Schedule Record according to the set video type common detection and alarm and time section 31 Manual Click the button and the according channel is recording no matter the channel in any state Stop Click the stop button and the according channel stops recording no matter the channel in any state Period Set the time section of common recording The recording will start only in the set range Record type Set recording type regular detection or alarm Regular Perform the regular recording in the set time section The video file type is R Detect Trigger the motion detect camera mask or video loss signal When above alarm is set as opening recording the detection recording state is
60. otocols x ffl 5 Hide 5 Zoom O a Focus 5 iris 5 f Set PTZ Trace Cancel Picture 3 10 PTZ setup Speed Set the PTZ rotation range Default range 1 8 Zoom Check button to adjust the zoom multiple of the camera Focus Chic button to adjust the focus of the camera iris Click button to adjust the iris of the camera Hide Current interface will be temporarily hidden after click it Direction control Control the PTZ rotation 8 directions control is supportive 4 directions in Front panel is supportive High speed PTZ Full screen show channel image Left press mouse and control PTZ to rotate orientation Left press mouse and then rotate the mouse to adjust the zoom multiple of the camera 5 19 11 Set Enter the function operation menu Page switch Switch between different pages Special functions 1 Preset Set a location for the preset calls the preset points PTZ automatically turns to the setting position 1 Preset option Set a location for the preset procedure is as follows Step1 in Picture 3 10 click the Direction button will turn into preset position click the Settings button to enter Picture 3 11 Step 2 click the Preset button then write the preset points in the input blank Step 3 click Settings button return the Picture 3 10 Complete setup that is the preset points and preset position corresponds Clear Preset Input preset points click Remove
61. ox and get rid off the plastic protective materials Check whether there is any visible damage to the DVR appearance At last please open the machine crust and check the data wire in the front panel power wire the connection between the fan power and the main board 1 Front panel and rear panel n H The key function specification in the front panel and the interface specification in the real panel are in the specification Please check the product type in the front panel whether is accordant with the product type you order The label in the real panel is very important for the after service Please protect it carefully When you contact us for after service please provide the product type and serial number in the label 2 Check After open the cover you should check if it has obvious damage trace also please check the front panel data cable power cord and motherboard s connection are loose or not 2 2 Hard disk installation For the first use please install the hard disk this machine box can install two hard disk no limited capacity disassemble the screw 2disassemble the cover S onnect the data wire 6 onnect the power wire over the machine 8hix the cover B C H This product chassis specification for the standard 1u so it can be installed in the standard shelf Installation steps and attention items 1 Make sure the temperature in the room lower then 35 C 95 2 Keep the equipment have 15cm 6
62. put connections cccccooonncnncccnnnnccnncnnnnnncnnnnnnnnncnnnononancnnnnnnnnnrenncnos 7 2 071 Video INPUT COMMNCCIONS lll alada 7 2 6 2 VIAEO OUTDUT CONNCUIONS ASN lA iii e 8 2O SR A A A A 8 lo Tei Eeler TINUE escheat al 8 2 6 5 lo lola signal onp EE 8 2 7 Alam inputand GENEE CONAM e 18 2 AM MPU DOLE ee ter e 20 2 7 2 Alarm output port specficaion nn 11 2 7 3 Alarm output port relay parameters occcccconncococoncnncononcnnconanonnnnnncnnconancnnnnnannnnnnnnrnncnnancnnnnnas 11 eene all EE 12 ABASIC ODO AOT E 5 SE UTON a rte ere ei eer eee ee ee ede een ee ede eee Ree eens Rene eee Ree ee eT een Re eeeCe eRe Tee 12 O ollas 13 SS e o acne Seinsionna ncn sieves dca IO 13 SE 14 3 5 Desktop shortcut Menu EE 14 EN N OA eaa ee eee eee eee ee eee eee eee er 15 A OA CK EE 16 ci 17 A haut a aaa a a a a a a Gubheasthanteanmhenniuudtanas 18 Ds Ie IA COMTO eier e O 19 EE EE Error Bookmark not defined SESTAS E EES E EIIE EE EENE EEA EEE EA TE 25 A EAR A or ee eee REO ET Error Bookmark not defined AS a el Error Bookmark not defined 360 0 PO 26 4 Main MENU coooccnncccnnnccnnnconononnnnnnnnnnnnonnnnonnnnnnnnnnnnnnnnnnnnnnnnrnnnnnonnnnnnnnnnnannnnnnnns Error Bookmark not defined 41 Man Menu HEEN 28 Ae 2 TAC CON O ee E E E E EE 41 A A e EE 41 42 eier 42 o 42 724 UE eee eee ee 44 eege Error Bookmark not defined AS Weide Dee rte Error Bookmark not defined A e o o AAA A Error Bookmark not defined 4O 3 VICO LOSS NAAA AAA AA AAA
63. r IP IP address of DDNS server Port Port No of device related DDNS server listen port User name the user name that device can log in DDNS server Password the password related to the user name Refresh cycle Time interval between device and DDNS when chynchronously Note Please set up server before using DDNS Alarm center When alarm occurring report alarm information to alarm server AlarmServer Protocol Type GENERAL Enable mm Server Name AlarmServer Port 15002 Alarm report Bi Log report Pic 4 30 alarm server setting Protocol type GENERAL Enable To tick it means enable Server IP IP address of Alarm Server Port Device Port No Alarm Report Tick it means to report alarm information to server Log Report Tick it means to report log to server Wireless Config ADSL through 3G net card use CMS to visit and config the device 57 Tl Main Menu gt System gt NetService gt Wireless Config Enable a Type AUTO Wireless AP AccessPoint Dial Number 777 User Name ctnet mycdma c Password EE EEES IP Address Picture 4 31 Wireless Config Enable Choose Enable to make all settings available Type Dial type default AUTO Wireless AP 3G access point Dial Number 3G Dial Number User Name User name of 3G Password Password of dial user IP Address IP address got from dial Note parts of A series and T series don t support this function Mobile Monitor Setup To visit the
64. r output Time display and Channel display set the display position of channel title and time title the channel no region cover time title and channel title setting function exist at output mode only when the device is under hybrid HVR mode or full analog DVR mode 4 4 6 PTZ device RS485 device when under hybrid mode full digital mode it shows with PTZ device and RS485 device a 62 W Main Menu gt System PT 4 Config PTZ Device Channel 4 Protocol PELCOD NONE 1 Baudrate 9600 9600 Data Bits 8 amp Stop Bits 4 Mone lO OK CS Cancel Pic 4 37 PTZ configure Channel Choose the dome camera input channel Protocol Choose the corresponding dome protocol PELCOD as an example Address Set as the corresponding dome address Default 1 Note The address must be consistent with the dome address Baudrate JChoose the corresponding dome baud rate length You can control the PTZ and vidicion Default 115200 Data bits Include 5 8 options Default 8 Stop bits Include 2 options Default 1 Parity Include odd check even check sign check blank check Default void When under full digital mode it will show RS485 device 63 Y Main Menu gt Svstem gt RS485 Device Protocol NONE E Address 7 Baudrate 9600 Data Bits 83 Stop Bits 11 Parity None oK Cancel 4 38 RS485 device Protocol choose related protocol of brand model for example DaHua Addre
65. re as followed 4 2 3 4 The setting of the alarm is not correct The connection of the alarm is not correct The alarm input signal is not correct A alarm is connected with two loops synchronously The remote controller is not working Possible reasons are as followed 4 2 The remote control address is not correct The remote control distance is too far or the angle is too large The battery is used up The remote controller or the front panel of the recording machine is damaged 90 W 21 The storage time is not enough Possible reasons are as followed 1 Frontvidicon quality is bad The lens is too dirty The vidicon is in backlighting installation 2 The hard disk capability is not enough 3 The hard disk is damaged 22 The downloading files can not play Possible reasons are as followed 1 There is no media player 2 There is no DX8 1 software or higher edition 3 There is no DivX503Bundle exe file to play AVI video files 4 The DivX503Bundle exe and tfdshow 2004 1012 exe files must be installed in the windows xp system 23 can not remember the advanced password or network code in the local menu operation Please contact the local service or call the HQ service We will offer the service according the machine type and the program edition 24 Can not see the preview picture the digital channel Possible reasons are as followed 1 Did not add device 2 The device of related channel was not enable 3 Th
66. resolution is over the max resolution that the channel supported then a red X will be shown on the preview image for example Under full digital channel mode Max resolution of channel 3 is D1 if it was connected to a device with resolution over D1 such as 960H you will see below pic 1080P 720P S60H D1 HD1 CIF 1080P 720P S60H D1HD1 CIF 0 0O D J H Re O O A A O A 0 Ol O E O O O Ol pu O O O E Remark this series of product with full analog channel mode hybrid mode and full digital mode and different model with different channel mode user can shift the mode freely if necessary 71 4 5 Advanced Manage tools menu including HDD manage account manage online user output adjust auto maintain upgrade 4 5 1 HDD Manage Configure and manage the hard disk The menu displays current hard disk information hard disk number input port type status and overall capability The operation include setup the write read disk read only disk redundant disk hard disk format resume default Choose the hard disk and click the right function button to execute Note Read Write Disk The equipment can write or read data Read only Disk The equipment can read data but can not write data Redundant Disk Double backup the video files in the write read disk PP Main Menu gt Advanced gt HDD Manage x HDD No rype Status Read Write 1 1 Read Write Normal Be Read Write Normal Snapshot
67. rm signal is turned on even there are several motion detect signals in the set interval Alarm output Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on Delay Delay a few moments and stop when the alarm state is turned off The range is 10 300 seconds Record channel Choose the recording channel multiple option supportive Trigger the video signal when the alarm is turned on Note Set in the recording setup and perform the linkage recording Start detecting video files in the corresponding time section Tour m means that the selective channel is single window alternate patrol preview The interval is set in the Main Menu gt System gt Tour PTZ Activation Set the PTZ activation when the alarm is turned on Hybrid mode PTZ link to the related PTZ information of analog channel While digital channel model the PTZ is link to the related PTZ information on the remote device connected Note to link PTZ need go Shortcut menu gt PTZ control to set preset point cruise between points amp interval time etc PTZ Activation CAM 1 None CAM 2 None CAM 3 None CAM 4 None C OK Cancel Picture 4 7 PTZ Activation under hybrid mode Delay When alarm is over recording will last some seconds 10 300sec then stop Show message Pop the alarm information dialog box in the local host computer screen Send EMAIL m means sending an email to user when
68. ss set with corresponding address default is 1 Baud rate choose bard rate that related device use default is 115200 Data bits including 5 8 options default is 8 Stop bits including 2 options default is 1 Parity Include odd check even check sign check blank check Default void Remark when analog channel existing there will be PTZ and RS485 at PTZ setting if device is all digital NVR mode it will show RS485 only 4 4 7 RS232 T series do NOT support this function 64 W AS Main Menu gt System gt RS232 e ES Function Console F Baudrate 115200 y Stop Bits Parity None y Pic 4 39 serial port setting Serial Port Function Common serial port is used to debug and update program or set up specific serial port Baud rate Choose the corresponding baud rate length Data bits Include 5 8 options Stop bits Include 2 options Parity Include odd even mark space default is none 4 4 8 Tour Set the patrol display IM means that the tour mode is enable You can choose the single view four view six view of single mode tour or hybrid mode tour Main Menu gt System gt Tour Enable Tour Interval E E View 1 1121314 View 4 Alarm Tour Type III Interval 5 S Return after finished 65 DI Pic 4 40 tour configure interval Set the patrol switch interval The set range is 5 120 seconds alarm tour set the interval to shift alarm tour range is 5 120 seconds choos
69. tal PTZ 2 The setting connection or the installation of the PTZ decoder is not correct 3 The connections are not correct 4 The PTZ setting of the DVR is not correct 5 The protocols of the PTZ decoder and the DVR are not matched 6 The address of the PTZ decoder and the DVR are not matched 7 When multiple decoders are connected the far port of the PTZ decoder line A B must connect a 12092 resistance to reduce the reflection otherwise the PTZ control is not stable 8 The distance is too far 12 The motion detect is not working Possible reasons are as followed 1 The time range set is not correct 5 88 T 2 The motion detect area set is not correct 3 The sensitivity is too low 4 Limited by some hardware edition 13 I can not login via web or CMS Possible reasons are as followed 7 The system is windows 98 or win me We recommend updating to windows 2000sp4 or higher Version or installing the software for low edition ActiveX is hold back The version is not exceeded dx8 1 Update the display card driver Network connection failure Network setting issues Invalid password or user name The CMS is not matched the DVR program version 14 The image is not clear or there is no image in network preview state or video file playback state Possible reasons are as followed 1 2 6 Network is not stable The user machine is resource limited Choose the play in team mode in the network setup of D
70. tical Sharpness Picture 3 18 Color Setting 3 5 Output Adjust Hybrid mode is with black margin vertical amp horizontal while full digital mode without Adjust TV output area parameters You can use the desktop shortcut menu or enter main menu gt management tools gt Output adjust po Output Adjust e Output Adjust Top Deflate Bottom Deflate Left Deflate Right Deflate Black vertical Black horizontal J Top Deflate Y Bottom Deflate E 0 Left Deflate i Right Delate E 0 Hybrid HVR Mode full digital NVR mode Picture 3 19 Output Adjust Note The black margin vertical amp horizontal at output adjust of hybrid mode is only effect to analog channel 3 5 8 Logout Logout shut down the system or reboot up You can use the desktop shortcut menu or enter main 25 Tl menu Reboot Picture 3 20 Logout Shutdown Reboot the system logout Quit the menu Offer password next entrance shut down Quit the system Turn off the power supply When press the shut down button there is schedule hint After three seconds the system is shut down Cancel midway is of no effect reboot Quit the system Reboot up the system Note T series have no shutdown function Logout AVA IN Reboot T series logout 3 5 9 Window switch Preview in single window four windows eight windows nine windows sixteen windows according to your choice Note different video input number have
71. tus o means it is not in alarming status e means it is in alarming status You can use desktop shortcut menu or click main menu gt alarm function gt alarm output to enter the alarm output interface T series no alarm output Alarm Output Alarm Type Configuration Manual Sto D Status OK Cancel Picture 3 9 alarm output Configuration Alarm is on according to the configuration Manual Click the all button and the according channel is alarming no matter the channel in any state Stop 1 Click the stop button and the according channel stops alarming no matter the channel in any state 18 i 3 5 5 PTZ control T series no PTZ function PTZ control is a little different between hybrid mode amp full digital mode Digital channel the digital channel need link PTZ the remote device should connect with PTZ and with protocol correctly set also Analog channel Only when the device is connect with PTZ and configure protocol correctly is ok Operation interface is as followed The functions include PTZ direction control step zoom focus iris setup operation patrol between spots trail patrol boundary scan assistant switch light switch level rotation and so on Note1 Decoder A B line connects with DVR A B line The connection is right 2 Click main menu gt system configuration gt P TZ setup to set the PTZ parameters 3 The PTZ functions are decided by the PTZ pr
72. two methods to turn off the DVR Entering main menu and choosing turn off in the turn off the system option is called soft switch Pressing the power supply switch is called hard switch Illumination 1 Auto resume after power failure lf the DVR is shut down abnormally it can automatically backup video and resume previous working status after power failure 2 Replace the hard disk Before replacing the hard disk the power supply switch in the real panel must be turned off 3 Replace the battery Before replacing the battery the setting information must be saved and the power supply switch in the real panel must be turned off The DVR uses button battery The system time must be checked regularly If the time is not correct you must replace the battery we recommend replacing the battery every year and using the same battery type Note The setting information must be saved before replacing the battery otherwise information will lose 3 3 System Login When the DVR boots up the user must login and the system provides the corresponding functions with the user purview There are three user settings The names are admin guest and default and these names have no password Admin is the super user purview guest and default s permissions are preview and video playback User admin and guest s password can be revised while their permissions can t be revised user default is the default login user whose permission can be revised but not its
73. ty base on different requirement there are 3 options in the drop down box S z gt Detection type there are 8 kinds of detection type Brightness anomaly detection Sharpness detection Noise detection Color cast detection Screen freezes detection Scene change detection Anthropogenic interference and PTZ runway detection Can choose one or more types if necessary when video detect selected type the alarm will be triggered Video Diagnosis Sensitivity Brightness anomaly detection Sharpness detection JNoise detection IColor cast detection _JScreen freezes detection Scene change detection Anthropogenic interference detection PTZ runaway detection Pic 4 15 rule setting page of video diagnosis The setting way of set withdraw garrison time period and linkage parameter please refer to chapter 4 3 1 motion detection 5 46 T For example enable video analysis function algorithm rules is PEA the alert way in the rule is Cordon prohibited direction is bidirectional when a moving object across this warning line alarm is triggered see below pic4 16 Pic 4 16 the alarm image regarding one of the video analysis Video Teaching http v youku com v_show id_XNDY5MjcOOTcy html cordon http v youku com v _show id XNDY5Mjc3MjAw html warning area http v youku com v_show id_ XNDY5Mj c40Dg4 html items stranded http v youku com v_show id_XNDY5Mjc4MDAO html items stolen shift 4 4 System setup
74. video transmission line is too large The color and brightness setting of the DVR is wrong can not find the video files in local playback mode Possible reasons are as followed 4 2 3 4 5 The data line of the hard disk is damaged The hard disk is damaged Update the different program with the origin program files The video files to look up are covered The recording is not on The local video is not clear Possible reasons are as followed 4 2 3 4 5 The image quality is too bad The reading program is wrong Reboot up the DVR The data line of the hard disk is damaged The hard disk is damaged The hardware of the DVR is damaged There is no audio signal in the surveillance window 5 87 5 Possible reasons are as followed 1 It is not an active tone arm 2 Itis not an active sound box 3 The audio lines are damaged 4 The hardware of the DVR is damaged H There is audio signal in the surveillance window but mo audio signal in the playback state Possible reasons are as followed 1 Setting issues the audio option is not chosen 2 The according channel is not connected with the video 10 The time is wrong Possible reasons are as followed 1 Setting is wrong 2 The battery is in bad connection or the voltage is too low 3 The oscillation is damaged 11 The DVR can not control the PTZ Possible reasons are as followed 1 There is something wrong with the fron

- colomboCCTV

Contents

Download Pdf Manuals

Related Search

Related Contents