Traffic Light Controller User Manual
Contents
1. 3 Manual On gt Amber gt Green Flash Mode is ON All roads have their respective Amber lights Flasher ON ea blinking Up Scroll up items on present menu page LCD display e Down Scroll down items on present menu page LCD display A Select To select an item from present menu LCD display e Back Go back to earlier menu page LCD display 5 Page FORBIX SEMICON Traffic Light System 5 0 Master Controller LCD Display Menu Tree Machine operates in two modes Automatic Mode Manual Mode Pattern 1 Pattern 2 Setup Restore Seq1 Time 30 199 sec Seq2 Time 30 199 sec Seq3 Time 30 199 sec Ped Time 15 60 sec Safe Time 00 10 sec Amber R gt G 00 10 sec Amber G gt R 00 10 sec Flash ON OFF F on Time 12 00 23 59 F off Time 00 00 11 59 Set Time 00 00 Update OOO FORBIX SEMICON Traffic Light System 6 0 Master Controller Important Notes Warnings Important Notes Warning The Master Controller Machine takes around 5 10 sec booting time Do not press any buttons in the Master Controller Machine when Busy LED is blinking transmitting information to slaves If power not supplied to Master Controller Machine the slaves will continue to stay in the Previous State Do not dismantle antenna that will permanently damage the system In the Manual Mode only timing parameters can be changed modified After entering all the data the user2. Document HISTOLY ciaren aaa aaa aaa aa aaa aa aaa aaa aeaa 13 E FORBIX SEMICON Traffic Light System 1 0 Traffic Light System Master Controller Unit Supply Connectors Antenna Busy LED indicator Back button gt Scroll UP the menu OW sleet Scroll Down the menuy gt Flasher ON Seq3 Manual On Seq2 Manual On Seq1 Manual On Mode Sel Reset Wireless Control of traffic light sequence from the master controller Various different traffic sequence patterns are pre programmed ee FORBIX SEMICON Traffic Light System 2 0 Preprogrammed Pattern 1 with free left Ne SEVGIDA ECE FORBIX SEMICON Traffic Light System 3 0 Traffic Light System Pattern 2 without free left a og FI LY AWS 4 Page FORBIX SEMICON Traffic Light System 4 0 Master Controller Buttons Description Machine operates in two modes m Automatic Mode Manual Mode Diagram Buttons Description Mode Sel Selects between Automatic Mode and Manual Mode Also resets ode Se O Keci the machine In reset state all slave units turn ON to Safe Time all ese Red lights ON Selects Sequence 1 manually Road 1 light turn Green Red Seq1 Manual On e gt Amber gt Green Selects Sequence 2 manually Road 2 light turn Green Red Seq2 Manual On e gt Amber gt Green Selects Sequence 3 manually Road 3 light turn Green Red Seq
3. FORBIX SEMICON Traffic Light System User Manual Traffic Light System Traffic Light System Introduction This document contains all the information to program configure and operate the complete traffic light system from the master controller unit The master controller programming method is explained in detail Visit the link http forbixindia com fbx traffic light to read though other documents viz connection diagram dimensions etc This User Manual describes procedure to operate the Wireless Traffic Light System by e Automatic Mode e Manual Mode Contents 1 0 Traffic Light System Master Controller Unit cccccccssssccccceesssssnnneeeeeecssssessaseeeesesssessnsaeeeeeees 2 2 0 Preprogrammed Pattern 1 With free left cccssssssececceesssssnseeeceecssseeseeseeeeeeessseessnaeeeeees 3 3 0 Traffic Light System Pattern 2 without free left cccccccccccessessssseeeeeeesssessseeeeeeeeessesssseeeeeees 4 4 0 Master Controller Buttons Description ccccccccccceccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeeeeeeeeeeeeeeeeeeeeeeas 5 5 0 Master Controller LCD Display Menu Tree cccscessssecceceeessesenneeeeeeeeessessasaeeeeeeesssssnnaaeeeeees 6 6 0 Master Controller Important Notes Warnings cccccccccsssscccscssseceeseseeceeseeeees seseeesseaeeeesaas 7 7 0 Master Controller Display Messages and Program ccccccccccssssseeeececcecaeaeseeecceeeesseaesseeeeeeeesaas 8 8 0
4. ON time and Sequence 3 Road 3 Green ON time sr FORBIX SEMICON Traffic Light System Press Select key to select an option Ped Time press scroll Up and Down keys to change the Pedestrian time and then press again Select key to save the changes In this state the pedestrian lights will ON All 3 Roads of Pedestrian Light up to 15 60 sec Press Select key to select an option Safe Time press scroll Up and Down keys to change the Safe Time All 3 Roads are in Red Light and then again press Select key to save the changes up to 0 10 sec Press Select key to select an option Amber R to G press scroll Up and Down keys to change the Amber Red to Green The Amber Light of 3 Roads and then again press Select key to save the changes This timing corresponds to the time while Amber is ON while changing from Red to Green The value can be set up to 0 10 sec Press Select key to select an option Amber G to R press scroll Up and Down keys to change the Amber Green to Red The Amber Light of 3 Roads and then again press Select key to save the changes This timing corresponds to the time while Amber is ON while changing from Green to Red The value can be set up to 0 10 sec Press Select key to select an option Flash press scroll Up and Down keys to change the Flash On off The Amber Light of 3 Roads and then again press Select key to save the changes Flasher On time is depending on the F on Time and Flasher Off time is de
5. have to Update and then press Mode Sel Reset to enter AUTOMATIC Mode In the Manual Mode Real Time Clock ticking changes will not be visible Once the User has pressed the Update then to come out of the present page the Back button is should be pressed Make sure the master controller is at least 2 3 meters away from the slave units For better communication the master controller antenna should be visible to the slave unit antenna failure to do so in the installation will cause signal loss After power up of master state is IDLE model all slaves in red light After power up of slaves the state is RED Light ON While doing setting in the Manual Mode option the slaves are in Idle State All roads are in Red Trae FORBIX SEMICON Traffic Light System 7 0 Master Controller Display Messages and Program o enter Manual Mode Press Select key to enter Pattern 1 When Saved is displayed then parameters are sent to all the slaves via radio and will be displayed for 1 2 sec Press scroll Down key to select Pattern 2 8 Page FORBIX SEMICON Traffic Light System Press Select key to enter Pattern 2 Press scroll Down key to select Setup Press Select key to enter Setup Press scroll Up and Down keys to change Seq1 time in seconds Seq1 corresponds to Road 1 Green ON time and then press select key to save the changes Same as Sequence 2 Road 2 Green
6. pending on F off Time 10 Page FORBIX SEMICON Traffic Light System If the Flash On in Step 13 is set then flash on time has to be set Press scroll Up and Down keys to change flash on time Similarly for Flash OFF time option If the Flash is set to OFF then there is no need of changing of Flash on time and Flash Off time Range of Flash e The range of Flash On time is between 12 00 23 59 e The range of Flash Off time is between 00 00 11 59 Press Select key to select an option Set Time to change the time This is the Real Time Clock and the complete traffic light system is rely on this time Entering all the data in the setup then select Update option to store the values in the slave machine via radio Then press the Back button to come out of the setup And press the Button Mode Sel Reset only then the slaves work according to user changes The Manual Mode settings Restore option is for restoring default value factory programmed value of system Pressing the Seqi Manual On Button Sequence 1 will execute and machine will remain in this state till any other change oo 1Pane FORBIX SEMICON Traffic Light System Pressing the Seq2 Manual On Button Sequence 2 will execute and machine will remain in this state till any other change Pressing the Seq3 Manual On Button Sequence 3 will execute and machine will remain in this state till any other change Press the Flasher ON Bu
7. tton to turn ON the Flasher manually Following to this the Amber Light will blink 3 sec of ON time and 1 sec of OFF time The range Flasher ON and OFF time can be set in the Setup Do not press any buttons in the Master Controller Machine when the Busy LED transmitting to slaves is blinking The busy button blinking indicates that the master controller is busy doing internal calculations or sending data over wireless to the slaves Oo Page FORBIX SEMICON Traffic Light System 8 0 Document History Revision Date Approved Description Changes Apr 2014 Yes Initial Release 13 Page
Download Pdf Manuals
Related Search