97631I Man Avanzado Telefono iLOFT VDS EXTRA V06_11_TRAD
Contents
1. 1 While in the menu for 2 To enable this mode hold down the three buttons Programming the tele simultaneously for 5 seconds until you hear a BEEP phone s address from the and the leds turn off F1 button button and button telephone the red and 0 blue leds will stay on If on the other hand you want to disable the F1 command option you can do this via the o MDS Panic Guard Unit in NIGHT MODE See previous page o Within the Programming the telephone address via the telephone menu Return to standby mode by pressing F1 simultaneously Note On deactivating the F1 command option the F1 will simply function as an output While in the Programming the telephone s address from the telephone menu 1 While in the menu for 2 Disable this mode hold down the three buttons Programming the tele simultaneously for 5 seconds until you hear a BEEP phone s address from the and the leds turn off F1 button and button telephone the red and blue leds will stay on Page 19 EXTRA Telephone Fi Led Signals F1 Button for Additional Functions STATUS Telephone Not progr2. 18 F1 Additional Functions Button a 18 S uu unupa tata 19 AVallable Fun eti oriSrau a u ua askhas i 19 sas reer Peery cer 20 Answennga Calls u uuu yu u uu Saku asua auass 20 u 20 Mode 20 Opening ANS COOP 21 Automatic Door Opening DOORMATIC Mode 21 Canceling 21 Page 3 FERMAX iLOFT EXTRA Telephone TELEPHONE INSTALLATION this telephone can be installed directly at surface level Telephone Dimensions Height x Width x Depth 146 x 90 x 20 mm Note attached to the wall or in a standard flush mounted box XX standard box Grid Positioning Details Page 4 iLOFT EXTRA Telephone iLOFT EXTRA Telephone CONNECTIONS DIAGRAMS Connection e Connection Terminals Power supply 18 Vdc L Data Bus T Call Button Connection for Residential Door P1 A A Call extension connection or light and bell activator Ab Open Collector Output When the lock release command is sent it sends a negative sig
3. Hang Up press 4 to end communication if not the conversation will be disconnected after 90 seconds Once disconnected the blue led will turn off Auto start main panel with the telephone on standby press and release this button short press the blue led lights up indicates simplex mode Page 21 EXTRA Telephone 5 audio channel audio channel Entry Panel ResidencResidence Entry Panel Opening the Door When a call is received from the entry panel you can open the door at any time by pressing the button When the lock release command is sent the Ab terminal sends a negative signal to activate any external devices where applicable Automatic Opening DOORMATIC Mode With Automatic Opening activated when a call is received from the entry panel the lock release is activated once the ringtone stops The open door function is disabled by default It must be pre enabled by the installer to be able to be activated by the user 1 To activate the function you must hold down 2 To deactivate the function you must the button and button simultaneously hold d
4. Code 9765311 VO6_11 Page 2 iLOFT EXTRA Telephone TABLE OF CONTENTS 4 m reper 4 CONNECTIONS au 6 Diagram S u a i ee 6 Gapacily uuu S 7 Technical Features uuu uuu u apa T Telephone Programming u LULU a a aaa s aRaa asa iaaa 8 From the entry panel aa 8 From the telephone 9 Telephone Settings u aes tases ad 11 RINGTONE SElSCHION uuu aa 11 Mam Pam sx mu sina muy 11 11 Call Volume 12 Resetting ParameterS ccccccccceseeetesseeeseeeeeeseeeeeseeeeseeeeeseseeeneneenenss 13 SIMPLEX Conversation Mode pp 14 Automatic Door Opening DOORMATIC 15 17 BUON 17 Lock Release Button Call to Guard eect teeta 17 Audio Activation Hang Up Autostart Button
5. Wiring 3 polarised wires CAT 5 compatible Number of different ringtones available 5 Call volume regulation 8 levels Maximum conversation time 90 seconds Maximum time to pick up on receiving the call 30 seconds Maximum time to programme the telephone 150 seconds Default conversation mode Duplex TECHNICAL FEATURES Power Supply 18 Vdc onsumption on standby 24 mA with audio 100 mA 55 40 5 95 Operating Temperature Humidity 146 x 90 x 20 mm Telephone Dimensions Height x Width x Depth Page 7 iLOFT EXTRA Telephone PROGRAMMING THE iLOFT TELEPHONE 1 Programming an address from the entry panel main With the telephone connected 1 The user should start from the Ringtone Selection configuration menu Press and hold the button for 5 seconds until you hear a beep then release a ringtone will sound on the main panel and the red led will flash slowly While in this mode The red led flashes slowly 2 Press the F1 and the button simultaneously for 5 seconds until you hear a tone BEEP Releasing the button sends a panel configuration command blue led flashing 3 Press the button residential call code from the panel A confirmation tone will sound on the telep
6. F1and 4 button simultaneously until you hear a BEEP and see the blue led flashing intermittently while input audio remains active you can hear the panel on the telephone way Handsfree Conversation audio channel audio channel Residence Entry Panel Entry Panel Residence audio channel Entry Panel Residence 2 From this point every time you press the amp button the output audio channel will activate you will hear the telephone on the panel and a constant blue led will light up On releasing the button the input audio channel will activate you will hear the panel on the telephone and the intermittent blue led will light up Once you enter simplex mode it will remain activated by default The next time the audio is connected the input channel will activate when you press the amp button short press To re establish handsfree conversation mode once the audio channel is open press the F1 and amp button simultaneously until you hear BEEP BEEP iLOFT EXTRA Telephone Automatic Opening DOORMATIC In this mode wh
7. FEF MAX MANUAL DE USUARIO USER S MANUAL MANUEL D UTILISATION BENUTZE MANUAL DO USUARIO MANUAL DE USUARIO USER S MANUAL MANUEL D IANDBUCH MANUAL DO USUARIO MANUAL USUARIO USER UTILISATION BENUTZERHANDBUCH MANUAL DO USUARIO MA VDS EXTRA iLOFT TELEPHONE UAL MANUEL D UTILISATION BENUTZERHANDBUCH MANUAL INSTALADOR INSTALLER S MANUAL MANUEL D INSTALLATION ONSHANDBUCH MANUAL DO INSTALADOR MANUAL DE INSTAL 5 MANUAL MANUEL D INSTALLATION INSTALLATIONSHANDBUC INSTALADOR MANUAL DE INSTALADOR INSTALLER S MANUA NSTALLATION INSTALLATIONSHANDBUCH MANUAL DO INSTALA JARIO USER S MANUAL MANUEL D UTILISATION BENUTZE INSTALLATION AND USER MANUAL ENGLISH iLOFT EXTRA Telephone CONGRATULATIONS ON PURCHASING THIS QUALITY PRODUCT Fermax electronics develops and manufactures well known systems that meet the highest standards of design and technology Your FERMAX video door entry system will allow you to communicate with the entry panel see who is calling you and open the front door if you wish We hope you enjoy its range of functions www fermax com Technical publication of an informative nature published by FERMAX ELECTRONICAS A E As part of its constant improvement policy FERMAX ELECTRONICA S A E reserves the right to modify the content of this document and the features of the products referenced therein at any time and without prior notice Any modification will be reflected in subsequent editions of this document
8. ammed Blue Led u very slow intermittent Green Led 0 Red Led Standby Call rapid intermittent Handsfree audio constant Output Audio simplex mode constant Input Audio simplex mode slow intermittent Do not Disturb constant Auto Opening Doormatic slow intermittent Select Ringtone Panel 1 slow intermittent Select Ringtone Panel 2 rapid intermittent Address Programming AVAILABLE FUNCTIONS constant constant e Door Opening and Automatic Door Opening DOORMATIC e Call to Guard where one exists e Call volume regulation 8 levels e Call Disconnection Do not Disturb e Ringtone Selection 5 options e Doorbell e Programming via the terminal and via the entry panel e Input audio volume regulation e Simultaneous activation of the Ab auxiliary output while opening the door e Simultaneous activation of the F1 auxiliary output while pressing the F1 button e Activation of lights and bells during the call Page 20 iLOFT EXTRA Telephone Operation Answering a call When the call button on the entry panel is pressed a call tone is emitted both from the entry panel and the telephone On receiving a call on the telephone the user has 30 seconds to answer The blue led flashes during this time to indicate a call waiting Audio activation When a call is received press and release button to speak to the visitor T
9. ct the ringtone circular sequence the last one played will be the one selected Red led slow flash G3 lt lt The red C na led flashes we rapidly Page 11 iLOFT EXTRA Telephone Exit ringtone selection standby 5 While in Ringtone Selection for Secondary Panel mode press the button to return to standby mode red led off 5 FERMER Note The current ringtone will sound on entering each option If you want to listen to the current ringtone without changing it press the button twice consecutively The ringtone volume will depend on the setting selected on the lateral potentiometer The volume can be altered while playing the ringtones Call Volume Regulation Starting from standby mode use the potentiometer to adjust the call volume to any setting between the maximum and minimum levels 8 settings Note The setting affects all ringtones generated by the telephone entry panels and doorbell To hear the selected setting you can make a call from the entry panel enter ringtone selection mode Call volume regulation does not affect the input audio settings If during call volume regulation the potentiometer is turned down to its minimum level a c
10. d for a period of 30 seconds it determines that the automatic door function should be activated When this doorbell feature is deactivated this function will also be deactivated Page 16 iLOFT EXTRA Telephone iLOFT TELEPHONE OPERATION Buttons 3933939 9999 N 9999 8 3833 Red LED Green LED Blue LED MICROPHONE 1 amp Buttons m Potentiometer r 0 Lock Release Call Guard Unit Button we Pressing this button activates the lock release The door can be opened at any time When the lock release command is sent the Ab terminal sends a negative signal to activate any external devices where applicable When you press this button with the telephone on the hook no audio a call will be made to the guard where one exists A beep will sound indicating that the action has been confirmed Audio activation hang up and auto start button On receiving a call the user has 30 seconds to answer The blue led flashes during this time to indicate a call waiting Audio activation when a call is received press and release this button to speak to the visitor The audio channel between the entry panel and the residence is opened operating in hands free mode The blue led will remain on indicating that a conversation with the entry panel is underway Hang Up press to end communication if not the conver
11. en a call is received from the entry panel the lock release is activated once the ringtone stops The open door function is disabled by default 1 To enable this mode hold down the three buttons simultaneously for 5 seconds until you hear a BEEP F1 button button and button 2 To activate the function you must hold down button and o button simultaneously until you see the green light flashing Once this is activated the door will automatically open when a call is received Note The automatic door function CANNOT be activated if it has not be previously enabled 3 To deactivate the function you must hold down button and button simultaneously until you see the green light turn off Page 15 iLOFT EXTRA Telephone BEEP BEEP 3333 889839 9999 4 To disable this mode hold down the three buttons simultaneously for 5 seconds until you hear a BEEP BEEP F1 button button and button Note There is also an option to connect a timer to the doorbell if this is not being used so that the automatic opening function is activated and deactivated each day at certain times If activate
12. he audio channel between the entry panel and the residence is opened operating in hands free mode The blue led will remain on indicating that a conversation with the entry panel is underway Hang Up press to end communication if not the conversation will be disconnected after 90 seconds Once disconnected the blue led will turn off Auto start main panel while on standby press and release g button the blue led lights up While in simplex conversation mode press the 4 button to speak and release to listen When the call button on the Entry Panel is pressed a call tone is emitted both from the entry panel and the telephone On receiving a call on the telephone the user has 30 seconds to answer The blue led flashes during this time to indicate a call waiting Press and release the amp button the blue led will continue to flash the input audio will remain active you will hear the panel on the telephone From this point every time you press the button the output audio channel will activate you will hear the telephone on the panel and a constant blue led will light up On releasing the 4 button the input audio channel will activate you will hear the panel on the telephone and the intermittent blue led will light up
13. hone The telephone is now programmed The blue led continues flashing Note When the telephone has not been programmed the blue led will flash very slowly Page 8 iLOFT EXTRA Telephone 2 Programming the address from the telephone The call code can be programmed on the telephone without the need for a call from the entry panel With the telephone connected 1 The user should start from the Ringtone Selection configuration menu Press and hold the button for 5 seconds until you hear a beep then release a ringtone will sound on the main panel and the red led will flash slowly While in this mode The red led flashes slowly 2 1 BEEP 5 2 BEEP 2 Press the and the button simultaneously for 8 seconds until you hear a double tone BEEP BEEP and release The blue and red led remain on Note after 5 seconds you will hear a BEEP continue to hold down the F1 and button for the 8 seconds until you hear the double BEEP The red and blue leds will remain on 3 The user presses the telephone buttons corresponding to hundreds tens and units to configure the code Every time one of these buttons is pressed a BEEP will sound and the corresponding number will increase Te
14. n Press button once 1 Press button 4 times 4 Press button 3 times 3 The red and blue leds will turn off Number programmed 143 iLOFT EXTRA Telephone iLOFT TELEPHONE SETTINGS Ringtone Selection The telephone allows you to select different ringtones for calls from the main panel and the secondary panel Accessing Ringtone Selection Mode From standby mode Ringtone for calls coming from the Main Panel 1 Press amp and hold the button for 5 seconds until you hear a beep then release a ringtone will sound on the main panel and the red led will flash slowly 2 Press the F1 button to select the ringtone circular sequence the last one played will be the one selected Red led slow flash 4 a AS D a The red led flashes We slowly Ringtone for calls coming from the Secondary Panel 3 While in Ringtone Selection for Main Panel mode press the button to select Ringtone Configuration for Secondary Panel the secondary panel s ringtone will sound and the red led will flash rapidly 4 Press the F1 button to sele
15. nal to activate any external devices F1 Button for Additional Functions Input Output Configured by default as an output sending a negative signal See more details in iLOFT Telephone Operation e CN1 Connector 1 Positive VDS 18 Vdc 2 Negative VDS 3 L VDS Audio and Data 4 T Doorbell Connection Supported via a negative wire NA Contact 5 A Call Extension Output Light Activator 6 A Call Extension Negative Connection Light Activator 7 Ab Lock Release Output 8 F1 Input Output e CN2 Connector 2 54mm molex connector for the speaker L T A A Ab F1 Call extension 8 L P1 external button can be installed to act as a doorbell Note The doorbell tone is set and cannot be modified In this way it differs from those available on the entry panels A A The telephone has a number of terminals where you can connect a call extension device ref 2040 or a light and bell activator ref 2438 which is activated when a call is made from either the entry panel or the residence s main door in the same was as with the ILoft video model Page 6 iLOFT EXTRA Telephone Note Where the call is disconnected the call extension device will not ring nor will the light and bell activator activate CAPACITY e Number of terminals per residence maximum 4 Number of terminals per block 199 Number of communication channels 1
16. ns always starting from 000 Once you reach 9 pressing the button again will return you to 0 and an error tone will sound The next time you press the button it will start from the number 1 Note In this case no audio will be available on the entry panel Hundreds Page 9 iLOFT EXTRA Telephone 4 The address is confirmed pressing the F1 and button simultaneously for 5 seconds We know the address has been programmed because the red and blue leds turn off return to standby mode If this is not pressed no address will be confirmed Se ee a Note If 60 seconds elapse without you The red and blue having confirmed the selected address leds will turn off the monitor will remain programmed with the last address stored before entering programming mode Note When the telephone has not been programmed the blue led will flash very slowly Example Programming Code 143 1 Access to the Ringtone Selection 2 Access to the Address via telephone configuration menu programming menu 1 BEEP 5 maz 2 BEEP BEEP 8 The red led flashes The red and blue slowly leds will remain o
17. onjunction with an MDS ADS decoder version V2 5 or above a panic alarm can be sent to the MDS guard unit On pressing the F1 button the corresponding command is sent via the bus while the telephone s output is activated so as to be able to activate the sensors MDS Note Where an MDS Panic Guard Unit is installed the telephone will use the F1 terminal as an input instead of an output such that an external panic button can be installed which will send the corresponding F1 command when the telephone is activated To send the command the option must be enabled either via the o MDS Panic Guard Unit in DAY MODE o Within the Programming the telephone address via the telephone menu Return to standby mode by pressing F1 simultaneously Panic Guard Unit MODE Selection 1 Enter programming mode by pressing lt 0 gt The display offers a series of instructions 20 oF D 0105 0 0 2 Pressing B and 3 repeatedly until you sO have completed the steps and the display L shows the current operating mode 3 Use the arrow keys to select the required operating mode NIGHT DAY 4 Press lt B gt when the required operating mode appears on the display gt eeeee 5 WT 5 E Page 18 iLOFT EXTRA Telephone While in the Programming the telephone s address from the telephone menu
18. onstant red led will light up to indicate that the call has been disconnected The disconnection option affects all ringtones generated by the telephone Potentiometer Where the call is disconnected the call extension device will not ring nor will the light and bell activator activate To re activate the call you must move the potentiometer above the minimum level The blue led flashes when a call is being received whether enabled or not Page 12 iLOFT EXTRA Telephone Resetting Parameters To set all the telephone parameters to default without deprogramming the call number useful when the user has doubts over the parameters programmed 1 BEEP 5 2 BEEP BEEP 1019 Press and hold the button for 10 seconds The telephone 555 will emit a short double beep and will reset all parameters to oa their default settings without deprogramming the call code Note The parameters reset to default are automatic opening mode disconnected audio and call volume settings hands free mode Page 13 iLOFT EXTRA Telephone Simplex Conversation Mode Default conversation mode on the telephone is lt handsfree gt During a handsfree conversation you can reset to simplex conversation mode press the button to speak and release to listen 1 From handsfree mode press the
19. own button and button until you see the green light flashing simultaneously until you see the green Once this is activated the door will light turn off automatically open when a call is received Important Note The automatic door function CANNOT be activated if it has not be previously enabled iLOFT EXTRA Telephone When the Automatic Opening function is activated and a call is received from the entry panel and the lock release is activated a negative signal will be sent via the Ab terminal for a period of a second Canceling the Ring Tone If during call volume regulation the potentiometer is turned down to its minimum level a constant red led will light up to indicate that the call has been disconnected The disconnection option affects all ringtones generated by the telephone To deactivate ringtone cancellation you must move the potentiometer above the minimum level The led will return to its previous status Note The blue led flashes when a call is being received whether enabled or not Where the call is disconnected the call extension device will not ring nor will the light and bell activator activate For more operating information See Call Volume Regulation F1 Additional Functions Query with your installer with regard to which functions have been programmed Options An auxiliary relay can be activated from the telephone and i
20. s connected to the terminal for any extra functions such as lighting alarm activation etc A panic call can be sent from the MDS guard unit to activate the sensors MDS in addition to the telephone actvating an output Page 23 FEF MAX
21. sation will be disconnected after 90 seconds Once disconnected the blue led will turn off Auto start main panel on standby press and release this button the blue led lights up Note The conversation is private no other terminal can hear it Handsfree mode is default mode While the audio channel is open the input audio can be regulated with the potentiometer without affecting the call volume The selected setting will not be altered if the call volume is subsequently adjusted If the channel is busy an error tone BEEP will be generated and auto start will not activate If the telephone is configured in simplex mode press to speak and release to listen the audio channel will be activated to hear sound at street level The auto start function is always used on the main panel except where a call is received on the secondary panel Once the conversation is over auto start will activate on the secondary panel for 30 seconds After this time it will activate on the main panel During the conversation handsfree can be adjusted to simplex mode Page 17 iLOFT EXTRA Telephone F41 Button for Additional Functions Operating Modes Initially configured by default as an output sending a negative signal Note An auxiliary relay can be activated from the telephone and is connected to the F1 terminal for any extra functions such as lighting alarm activation etc In c
Download Pdf Manuals
Related Search