CJ1W-SPU01-V2
Contents
1. e Sampling e Saving files e Network communications e Recipe function Data Storage Mode and Sampling Mode Either mode can be selected with the Change Operating Mode command 5 VDC 560 mA max SPU Unit only Other Memory Card HMC EFLILJL 120 mA max Supplied from Power Supply Unit Dimensions Weight 51 x 90 x 65 mm W x H x D 180 g max Memory Card HMC EFLILIL Memory Card from OMRON or commercially available compact flash card Normal operation may not be possible with commercially available compact flash cards depending on the manufacturer and model of the card General Specifications Specifications conform to the general specifications of the CJ series CPU Units OMRON Detailed Specifications Item Sampling Mode CJ1W SPU01 V2 Specifications Realtime sampling 1 pattern Normal sampling Up to 3 patterns Sampling patterns Any one of the following methods can be used e Start automatically when SPU Unit is started e Start with an SPU Console operation e Start with the SPU Unit s front panel command buttons Specify the command number e Start from the CPU Unit s ladder program Starting methods Interval User specified intervals 1 Realtime sampling 5 ms min Normal sampling 100 ms min Data Storage Mode Unit Ver 1 2 or later Data Collection Patterns Starting methods Basic Collection Pattern 1 pattern require2. Package Microsoft NET Framework Version 1 1 is required to run the SPU Console The Redistributable Package provided in the software package can be used to install NET Framework on the computer e FinsGateway Version 2003 The FinsGateway version 2003 communications middleware is required to run the SPU Console e Operation Manual The SPU Unit Data Management Middleware User s Manual Cat No V232 is included in PDF format in the software package OMRON CJ1W SPU01 V2 Unit version of CJ1W SPU01 V2 Functions Supported by SPU Units According to Unit Versions SPU Unit Unit Ver 1 0 Unit Ver 1 2 Unit Ver 1 3 Unit Ver 2 0 Unit Ver 2 1 Function Data Storage Mode added as a sampling operat Not supported Supported ing mode Scaling function for collection data Not supported Supported Recording without specifying the number of Not supported Supported records Terminology changes Sampling onduan Record Condition setting setting Recipe function Not supported Supported Expanded recipe function Not supported Not supported Supported Copy option Not supported Supported CHANNEL_BLOCK data type added Not supported Supported FTP communications Not supported Not supported Supported SPU Console Compatibility with Unit Versions of SPU Units CJ1W SPU01 V2 Unit version of SPU Unit Unit Ver 1 0 Unit Ver 1 2 Unit Ver 1 3 Unit Ver 2 0 Unit Ver 2 1 SPU Console version SPU Console Ver 1 0 Can be connected Ca
3. designations for saving etc Recipe settings Data Storage Mode Recipe settings recipe file write destination key etc Event settings Memory event settings Settings for conditions according to changes in memory e g bits turning ON in Data Storage Mode Scheduler settings Settings for schedules e g specific times time intervals Historical trends CSV files are read and displayed Trend graphs Realtime trends l sae l Sampling Mode Current sampling data is read and displayed in trend graphics in real time Software Package Contents The WS02 SPTC1 V2 contains the following software and data e SPU Console Execution Program The program that performs SPU Unit settings and operations e Microsoft NET Framework Version 1 1 Redistribution Package Microsoft NET Framework Version 1 1 is required to run the SPU Console The Microsoft NET Framework Version 1 1 Redistribution Package provided in the package can be used to install Microsoft NET Framework in the computer e SPU Unit System Data This system data is transferred to the SPU Unit e FinsGateway Version 2003 This communications middleware is required to run the SPU Console e Manual Data The manual data includes the SPU Unit Operation Manual Cat No V236 the SPU Console Operation Manual Cat No V230 the SPU Console Version 1 3 Operation Manual Cat No V231 and the SPU Console Version 2 1 Operation Manual Cat No V237 in PDF portable document format O
4. of the product on which liability is asserted IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY REPAIR OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED STORED INSTALLED AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION ABUSE MISUSE OR INAPPROPRIATE MODIFICATION OR REPAIR Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards codes or regulations that apply to the combination of products in the customer s application or use of the products At the customer s request OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product machine system or other application or use The following are some examples of applications for which particular attention must be given This is not intended to be an exhaustive list of all possible uses of the products nor is it intended to imply that the uses listed may be suitable for the products Outdoor use uses involving potential chemical contamination or electrical interference or conditions or uses not described in this catalog Nuclear energy control systems combustion systems railroad systems aviation systems medical equipment amusement machines vehicle
5. CJ series High speed Data Storage Unit SPU Unit CJ1W SPU01 V2 High speed Collection of System Data CSM_CJ1W SPU01 V2_DS_E_4_1 The CPU Unit can collect large amounts of process data operation data inspection data and other controlled system data quickly and automatically save the data in external storage media as CSV files CJ1W SPU01 V2 Features e There is no need to write ladder programming to collect data Even with an existing system just mount a SPU Unit and add it to the I O tables to start data collection e Use specified times or events as triggers to record the contents of specified words in I O memory in the CPU Unit e In Data Storage Mode up to 65 data collection patterns are possible with one basic collection pattern and data collection patterns 1 to 64 Combine the collection patterns with events to simultaneously collect many different types of data e Collected data can be stored in PC cards or in a computer connected via Ethernet Data Management Middleware can be used to make a few simple settings to store the data in a host computer e Recipes can be used to batch write numeric or text string data such as production parameters in the memory areas of the CPU Unit Recipe data can be saved in a Memory Card in the SPU Unit to easily enable process switchovers e SPU Units with a unit version of 2 1 or later also provide an FTP client This enables sending files of collected data to an FTP server on a host
6. MRON CJ1W SPU01 V2 SPU Unit Data Management Middleware EDMS The SPU Unit Data Management Middleware hereafter the EDMS is software that reads CSV format files from an SPU Unit and copies the files to a specified folder on a computer hard disk over an Ethernet network With version 2 0 or higher the collected data can be stored in a database SPU Unit Data Management Middleware EDMS Computer SPU Unit CPU Unit CSV files os 4 Collected data Database Storage Function The collected data can be stored Ethernet in a database either atthe press N J of a button or in the background after starting the computer Copy Function The collected data can be copied to the computer either at the press of a button or in the background after starting the computer EDMS Structure The EDMS consists of the following programs EDMS Console FinsGateway Service Copy Setting Window Copy Task Service Database Storage Setting Window Database Storage Service Microsoft NET Framework1 1 Microsoft Windows 2000 XP Vista e Copy Task Service The Copy Task Service copies files from an SPU Unit and saves them to a computer hard disk on the same network The service operates in the background and is used to monitor SPU Units e Database Storage Service The Database Storage Service stores the files tha
7. OMRON CJ1W SPU01 V2 Functional and Performance Specifications Item Specifications Unit model number CJ1W SPU01 V2 Applicable CPU Units CJ Series Unit classification CPU Bus Unit Unit number Oto F Mounting location CPU Backplane or CJ series Expansion Backplane No of Units per PLC 16 Unit max PE catel Soi ia ane a Memory Card Interfaces COMM port Connects to an uninterruptive power supply UPS for detection of power failure Ethernet LAN ports One port 10 100Base TX RJ45 Modular Connector UPS power failure input Unit number switch UNIT None UPS connected to COMM port Rotary switch Sets the unit number of the Unit as a CPU Bus Unit Select switch SELECT Toggle switch Sets the number of the command to execute Settings and operation Emer button ENTER Pushbutton switch Confirms and starts execution of the command number set using the select switch DIP switch DIPSW Card button DIP switch Pressed to release the Memory Card inserted in the Memory Card slot The Memory Card can then be removed System settings LED indicators RUN ERC ERH COMM LAN1 LAN2 and CARD Indications 7 segment display Functions Operating modes Current consumption e Displays error information and operating status of the SPU Unit e Displays the command number set on the select switch e Displays the IP address e Display other information
8. PU01 V2 SPU01 pewa oe l E m tit Eje 2e 7 segment displa a ian i g mie Daho Balo mlm Comm Pian Indicators n Card eject button ail vt Unit ninberswich l l o CD gt n Card button Memory Card slot t ll DIP switch z _ DIPSw Ib OO i COMM port Power interrupt signal input FAN por Select switch S a Enter button DIN Track ti i rack mounting pins Back of Unit Name Function Sets the unit number of the SPU Unit as a one digit hexadecimal value Unit number wite UINE ING Do not set the same unit number for more than one CPU Bus Unit under the same CPU Unit DIP swi
9. computer eliminating the need to write programming to store data in the host computer System Configuration SPU Console Setting Monitoring SPU Unit CPU Unit Software Hub or other network device LAN straight cable LAN straight cable commercially available commercially available OMRON CJ1W SPU01 V2 Ordering Information International Standards e The standards are abbreviated as follows U UL U1 UL Class Division 2 Products for Hazardous Locations C CSA UC cULus UC1 cULus Class Division 2 Products for Hazardous Locations CU cUL N NK L Lloyd and CE EC Directives e Contact your OMRON representative for further details and applicable conditions for these standards SPU Unit High speed Data Storage Unit aT Current Specifications o ot unit consumption Unit type Groguct j numbers al Ay Standards dt located PC Card slot Ethernet LAN port 5V 24V SPU Unit High speed Data Storage CF Card Type I II x 1 slot CJ1 CPU 1 port Bus Units Use an OMRON HMCEF 10 1 00Base TX CJ1W SPU01 V2 UC1 CE Memory Card Note 1 There is no accessory for the CJ series SPU Unit 2 This unit cannot be used with the Machine Automation Controller NJ series Support Software Product name Specifications Model Standards SPU Console Functions Unit settings sampling settings etc for High speed Data Collection Units Sinporcorware requi
10. d Data Collection Patterns Up to 64 patterns Any one of the following methods can be used e Start when a specified event occurs Use a memory event or scheduled event For details see the description of Data Collection Patterns 1 to 64 below e Start automatically when SPU Unit is started e Start with an SPU Console operation e Start with the SPU Unit s front panel command buttons Specify the command number e Start from the CPU Unit s ladder program Basic Collection Pattern required Either of the following methods can be used to start when an event occurs e Memory events Start when a CPU Unit bit or word value matches a spec ified condition Up to 500 memory events can be specified Data Collection Patterns 1 to 64 sampling e Scheduled events Start at a specified time or time interval Up to 16 sched uled events can be specified User specified intervals 2 3 Interval Basic Collection Pattern 5 ms min Data Collection Patterns 100 ms min Data Storage Mode Conronion Basic Collection Pattern Cannot be set Unit Ver 2 0 or later py op Data Collection Patterns Up to 10 patterns eee OPJ CIO Area WR Area HR Area AR Area DM Area and EM Area banks 0 to C Unit I O memory CJ2 0 to 18 areas Specify the desired CPU Unit I O memory area data area with a variable The data type can be specified with the variable Specifying I O The variables can be managed in groups memo
11. iles Records are added to one file from the start of data collection until the end Scaling Instead of directly storing the values collected from the CPU Unit s I O memory the collected values can be scaled with a linear equation or upper lower limit range before storage unit version 1 2 or later File size 2 GB per file Specified by user Number of records Specified by user or calculated automatically Saving method Data can be saved to a single file or multiple files up to 1 200 files Network communications Network communications Windows network shared folders FTP FINS communications Files in the Memory Card inserted in the PC card slot in the SPU Unit can be shared with a Windows 2000 XP Vista personal computer FTP server client provided e FINS server to execute FINS command e Routing to transfer FINS messages OMRON CJ1W SPU01 V2 Item Specifications Number of fields 10 000 File format CSV Recipe files The file size is restricted by the size of file that can be stored in the recipe folder Records Specified by the user Number of records No limit but restricted by the file size that can be stored in the recipe folder Conversion method Each field is written to the specified address in the specified Writing method data type Data Storage Mode Continuous region method Data written to continuos memory addresses Recipe function Unit Ver 2 0 or la
12. l as a negative logic input UPS Applicable Special Cable BU606F BUC10 BU70XS BUC16 Connecting the BU70XS or BU606F by Cable or Connecting to Another UPS The SPU Unit detects a power failure by the CS signal input turning ON Therefore wire the connection between the CJ1W SPU01 V2 and the uninterruptive power supply UPS so that when a power failure occurs the RS signal output from the COMM port at the SPU Unit is returned to the CS signal input For the UPS setting in the Setup Tool set the power failure signal as a positive logic input OMRON e COMM Port Specifications Connector type D Sub 9 pin male 4 40UNC OOOO OO0O0OO0O Connector Pin Arrangement Pin No Abbrev Signal name Not used O Receive Data Input Send Data Signal Ground Not used Output Request to Send Output Clear to Send Input O MOINIO Oa AI OINJ Shell Not used Shield Connection Example 1 Connecting the BU606F with Cable Pin 8 BU Pin 8 CS Pin 5 COM CJ1W SPU01 V2 OMRON Dimensions CJ1W SPU01 V2 Related Manuals Name CS1W SPU01 V2 SPU02 V2 Cat No CJ1W SPU01 V2 Unit mm Contents CJ1W SPU01 V2 V236 Describes the installation and operation of the SPU Units SPU Units O
13. nnot be connected Cannot be connected Cannot be connected Cannot be connected SPU Console Ver 1 2 SPU Console Ver 1 3 SPU Console Ver 2 0 SPU Console Ver 2 1 Can be connected but operates as the unit version that is the same as the unit version of the Unit Operates as SPU Console Ver 1 0 Cannot be connected Cannot be connected Cannot be connected Cannot be connected Can be connected but operates as the unit version that is the same as the unit version of the Unit Operates as SPU Console Ver 1 2 Can be connected Can be connected but operates as the unit version that is the same as the unit version of the Unit Operates as SPU Console Ver 1 3 e SPU Console versions lower than version 2 0 cannot connect to SPU Units with unit versions of 2 0 or later e SPU Console version 2 1 can be connected to SPU Units with unit versions earlier than 2 1 but the SPU Console s operations will be limited to SPU Console operations for the lower unit version e Microsoft NET Framework 1 1 is required to connect to SPU Units with unit versions 1 0 1 2 or 1 3 Cannot be connected Can be connected Can be connected but operates as the unit version that is the same as the unit version of the Unit Operates as SPU Console Ver 2 0 OMRON Cannot be connected Can be connected Can be connected CJ1W SPU01 V2 External Interface CJ1W S
14. old separately required to input SPU Unit settings SPU Units can be registered by specifying the IP address and name of the Unit Registration of applicable SPU Units same for the SPU Console Copies files from the Memory Card in a registered SPU Unit to a specified folder on a computer hard disk The function is enabled only when two or more is set in the Number of files Field from the SPU Console Settable number of copies 256 max Copy start conditions Start Button or automatically on computer startup Files will be saved to the computer hard disk over the network Copy timing automatically when copying is enabled data collection has stopped or files have been transferred Storage location Any specified folder File names can be created automatically using one or any com Copy function bination of the following objects Any text string the name of the copy the name of the source SPU Unit the time or date month day year the file was copied consecutive file numbers the date or time of the start record and the date or time of the last record Saved file name Settable cycle for monitoring when copying is enabled Default 10 s Used to check starting started monitoring copying copying stopped and error status conditions Copy monitoring cycle Status indicators Press the Display of log Button to display the operating status Log display or an error log list that shows the month day yea
15. peration Manual WS02 SPTC1 V2 SPU Console Ver 2 1 Operation Manual V237 Describes the installation and operation of the SPU Console Ver 2 1 WS02 EDMC1 V2 V232 Describes the installation and operation of the SPU Unit Data Manage SPU Unit Data Management Middleware User s Manual ment Middleware EDMS OMRON Read and Understand This Catalog Please read and understand this catalog before purchasing the products Please consult your OMRON representative if you have any questions or comments Warranty and Limitations of Liability WARRANTY OMRON s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year or other period if specified from date of sale by OMRON OMRON MAKES NO WARRANTY OR REPRESENTATION EXPRESS OR IMPLIED REGARDING NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE OMRON DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS WHETHER SUCH CLAIM IS BASED ON CONTRACT WARRANTY NEGLIGENCE OR STRICT LIABILITY In no event shall the responsibility of OMRON for any act exceed the individual price
16. r time event ID and description Data files that are copied to a specified folder on a computer hard disk are stored in a database The function is enabled only when three or more is set in the Number of files Field from the SPU Console Settable number of data base stor 65 max age services Database storage start conditions Start Button or automatically on computer startup Files will be automatically stored in the database as soon as Storage timing storable files are detected Microsoft Access 2000 2002 2003 Database storage function Applicable databases Microsoft SQL Server 2000 2005 Oracle Database 10g2 Settable cycle for monitoring when there are storable files Default 10 s Copy folder monitoring cycle Used to check whether storage is in progress monitoring for SAUS indicatore storable files or stopped Press the Display of log Button to display the operating status Log display or an error log list that shows the month day year time and de scription The SPU Unit version 1 2 or later only and CPU Unit clocks are periodically synchronized with the SPU clock synchronization function computer clock Software Package Contents The WS02 EDMC1 V2 software package contains the following items e EDMS Installation Program The EDMS installation program is used to install the Copy Task Service and EDMS Console on a computer e Microsoft _NET Framework Version 1 1 Redistributable
17. rate the SPU Unit monitor operating status errors display trend graphs and perform other operations from a personal computer SPU Console Specifications Item Specifications Model number WS02 SPTC1 V2 SPU Console Ver 2 1 Computer hardware Computer that meets the system requirements for Microsoft Windows XP Professional CD ROM drive Required for installation Display Super VGA 800 x 600 or better high resolution video adapter and monitor Mouse Must conform to the models supported by the applicable OS Network card A separate Ethernet network card is required for computers that do not have a LAN port System requirements Microsoft Windows 2000 Professional Microsoft Windows XP Home Edition Microsoft Windows XP Professional Microsoft Windows Vista OS Microsoft NET Framework Version 1 1 Application platform Microsoft NET Framework Version 2 0 Communications platform FinsGateway Version 2003 Unit information Unit setup variable settings collection pattern settings event settings recipe set Functions tings trend graphs and reports Ti j Monitor SPU Unit operating status and error information are displayed Unit information Operation Operations such as starting sampling IP network settings Unit setup FINS network settings Variable settings Setting items to sample by specifying I O memory addresses using variables Collection pattern settings Collection pattern settings period file
18. red for making settings for this Unit WS02 SPTC1 V2 PP OS Windows 2000 XP or Vista Option Function Data files collected by SPU Unit Data 1 license WS02 EDMC1 V2 SPU Unit Data Management Management Middleware are automatically acquired at the personal Middleware computer and can be registered in a database 5 licenses WS02 EDMC1 V2L05 OS Windows 2000 XP or Vista Flash memory 128MB Note HMC EF183 Memory Cardis Memory Cards Flash memory 256MB required fordata HMC EF283 N L CE collection Flash memory 512MB HMC EF583 Industrial Switching Hubs Specifications Product Current Appearance No of Failure Standards name i consumption A Functions pors detection piai 0 22 W4S1 03B Quality of Service QoS UC CE EtherNet IP control data priority i Failure detection Broadcast storm and LSI error detection No 0 22 W4S1 05B 10 100BASE TX Auto Negotiation 0 22 wast 05c ce Industrial Switching Hubs Mountable Racks NJ system CJ system CJ1 CJ2 CP1H system NSJ system Model Expansion Expansion Expansion CPU Rack Rack CPU Rack Backplane CP1H PLC NSJ Controller Backplane 16 Units CJ1W SPU01 V2 Not Supported 16 Units per CPU Unit 1 2 Units 2 Not supported per CPU Unit 4 1 The number of Units that can be mounted depends on the power supply capacity CJ1W PA202 4 Units max CJ1W PA205 CJ1W PD025 8 Units max 2 A CP1W EXT01 CJ Unit Adaptor is required
19. ry areas Vanabiedan BOOL INT UINT DINT UDINT REAL LREAL STRING has CHANNEL UINT BCD UDINT BCD WORD DWORD Shared Sampling Mode and yP CHANNEL BLOCK Data Storage Mode settings Set whether or not to use a record condition Record Condition If a record condition is used sampling data is stored within the SPU Unit only settin when the record condition is met For example sampling data can be recorded g only while a specified bit is ON or a specified word contains a particular value comparison CPU Bus Unit Area Data exchange e CPU Unit to SPU Unit Command execution such as starting stopping sam with the CPU Unit pling clearing a sampling file or saving a sampling file e SPU Unit to CPU Unit SPU Unit status information CSV files Indices record number time stamps hh mm ss ms ns Collected data file sampling indices serial numbers starting at 0 when sam format Record contents pling is started data for each symbol delimited with com ma records delimited with carriage returns Any one of the following methods can be used Nuinberet e The number of records can be specified samling resul e A time period can be specified The number of records is calculated automat ping ically from the time period and interval between samples records stored in ane tile e With a version 1 2 or later SPU Unit the number of records can be left unspec ified In this case data is added to the file until data collection is stopped Saving f
20. s safety equipment and installations subject to separate industry or government regulations Systems machines and equipment that could present a risk to life or property Please know and observe all prohibitions of use applicable to the products NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user s programming of a programmable product or any consequence thereof Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons It is our practice to change model numbers when published ratings or features are changed or when significant construction changes are made However some specifications of the products may be changed without any notice When in doubt special model numbers may be assigned to fix or establish key specifications for your application on your request Please consult with your OMRON representative at any time to confirm actual specifications of purchased products DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes even when tolerances are shown PERFORMANCE DATA Performance da
21. t are copied to the computer into a database The service operates in the background e EDMS Console The EDMS Console is a user interface program that provides access to the setting windows It accesses the Copy Setting Window for example to allow the user to input Copy Task Service settings specify operations and monitor operating conditions The program displays the files that have been copied to the computer in a list that can be used for data management The Database Storage Windows enable setting the database storage service controlling the storage operation and monitoring operating status EDMS Specifications Item Description Model WS02 EDMC1 V2 Processor Intel Pentium Celeron or compatible processor CD ROM drive Required for installation System requirements Display Super VGA 800 x 600 or better high resolution video adaptor and monitor Mouse Mouse supported by the applicable OS Network card Computers without a LAN port require an Ethernet network card sold separately OMRON CJ1W SPU01 V2 Item Description Microsoft Windows 2000 Professional Microsoft Windows XP Home Edition Os Microsoft Windows XP Professional System requirements Microsoft Windows 2003 Server Microsoft Windows Vista Application platform Microsoft NET Framework version 1 1 execution environment Microsoft Data Access component 2 6 or later Communications platform FinsGateway version 2003 Other software requirements SPU Console s
22. ta given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of OMRON s test conditions and the users must correlate it to actual application requirements Actual performance is subject to the OMRON Warranty and Limitations of Liability ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate however no responsibility is assumed for clerical typographical or proofreading errors or omissions 2012 7 In the interest of product improvement specifications are subject to change without notice OMRON Corporation Industrial Automation Company http www ia omron com c Copyright OMRON Corporation 2012 All Right Reserved
23. tch DIP SW Used for system settings Card button CARD SW Press this button to allow the Memory Card inserted in the Memory Card slot to be removed Card eject button Press to remove the Memory Card Sets the command to be executed The command number will be displayed on the seven segment Select switch display Executes the command set using the select switch The following indicators show the operating status of the Unit RUN ERC ERH COMM CARD Indicators and LAN Displays error information and the operating status of the SPU Unit Displays the command number when the select switch is operated Displays the IP address and other results of command execution Enter button Seven segment display Memory Card slot The slot used to insert a Memory Card LAN port LAN communications port Connects to 10Base T 100Base TX cables COMM port Connects to the power failure signal from an uninterruptive power supply UPS Connecting the Power Failure Signal CJ1W SPU01 V2 With the CJ1W SPU01 V2 the power failure signal from an uninterruptive power supply UPS is connected to the COMM port Special Cable can be used when either the BU70XS or BU606F both by OMRON is used as the uninterruptive power supply Connecting the BU70XS or BU606F by Special Cable Connect the Uninterruptive Power Supply to the COMM port on the CJ1W SPU01 V2 using the Special Cable For the UPS setting in the Setup Tool set the power failure signa
24. ter Searching within files The text string that was passed as the key is searched for in the target search columns in the recipe files and the rows for any matches that are found are extracted as recipe data Searching for Searching for file names The text string that was passed as the key is searched recipe keys for in the recipe file names i e a search is made for key csv and the files with matching files names are used as recipe files just like previous versions Key list search A search is made for recipe keys with the method used for unit version 2 0 1 In both cases the sampling cannot be performed faster than the CPU Unit s cycle time The actual sampling interval will always be longer than the CPU Unit s cycle time even if the sampling interval is set shorter than the cycle time 2 The Data Collection Patterns use the data collected by the Basic Collection Pattern so the data will be collected at the Basic Collection Pattern s interval even if the Data Collection Pattern s interval is set shorter than the Basic Collection Pattern s interval 3 The actual Basic Collection Pattern interval will always be longer than the CPU Unit s cycle time even if the sampling interval is set shorter than the cycle time OMRON CJ1W SPU01 V2 SPU Console Setting Monitoring Software Specifications The SPU Console is a software product used for OMRON s Storage and Processing Unit called the SPU Unit to set and ope
Download Pdf Manuals
Related Search
CJ1W SPU01 V2 cj1w-spu01-v2