Home

- Falk

Contents

1. 10 4 13 Screen If the screen no longer reacts to being tapped on without any errors it needs to be recalibrated To do so you need a stylus optional or another blunt object To avoid damaging the display never tap it with any pointed object Choose the Screen option and start calibration by confirming the following display screen with If you do not want to carry out the calibration exit the display by tapping on Tap and hold the stylus for a short while on the cross Repeat the process for each position at which the cross is located The calibration process is complete as soon as there is no longer any cross displayed Tap on the screen again to return to the menu Falk PANTERA User Manual 42 KOPANTERA 10 4 14 Info about O You can use the Info about option to display system information in particular about the version of the navigation software used about the map material and map data used The button gives you an overview of the software functions available to you for a limited period of time To exit the display tap on Tap on the button to display information about copyrights for the software used Here you will also find country specific copyright notices 10 4 15 Arrange menu Here vou can change the order of the functions within the settings menu as vou wish Select a function and move it to the position vou want with the aid of the rectangular arrows Do not worry no function will be lost And even if
2. Map Shows the map extract with your current position However you can also move the map with your finger Tap on the Zoom Button e to move the map or to zoom in and out Using the arrow button A which then appears at the bottom you can return the map back to your current position Next Manoeuvre In the manoeuvre box you are shown via an arrow the next turn off direction other roads which lead off and the distance to your next manoeuvre If you are on a roundabout the other roads which lead off are also shown in addition to your turn off arrow Relevant crossroads and junctions located before you get to your next turn off point are also shown If there are several crossroads leading off prior to your next manoeuvre numbers at the side indicate how many crossroads you still need to pass Distance to next manoeuvre Shows you how far the next manoeuvre Is away Next but one manoeuvre If you need to perform several manoeuvres in quick succession the next but one manoeuvre is shown in the form of a directional arrow at the right of the Manoeuvre box This means you can always see where you are heading in good time Main Menu The main menu button takes you to the menu guidance screen Current Position Your current position is marked by a red arrow on the map Zoom Button Tap on the zoom button e and then on the plus or minus symbol to adjust the scale of the map lf you tap on sis VOu can see vour route from the bird view
3. OPANTERA mt Ez A 2 5 3 0 km START S Top User Manual Legal information United Navigation GmbH Marco Polo Str 1 73760 Ostfildern United Navigation GmbH reserves the right to amend the details and data provided in this manual even without anv prior notice being given No part of these documents mav be reproduced or transferred without the explicit written permission of United Navigation GmbH irrespective of how or bv what means this is done All trademarks mentioned in this manual belong exclusively to the respective owners and may therefore not be used for commercial or other purposes As despite all efforts being made errors can never be completely ruled out no liability is accepted for the accuracy of the content in this manual We are grateful to receive notification about errors at any time All illustrations similar to actual product O 2013 United Navigation GmbH Ostfildern All rights reserved Last revised June 2013 FMI 10587 Contents 1 ON 10 Safety instructions and maintenance e nanna nennum nnmnnn nnmnnn 3 ol JSQIGWIFASMUGHOMS ut aa 3 t2 Disposal acia 3 introducti e ii a g a a 5 DEVICE descriptio i oo a arana O ae Era aa a Saada aaa 6 Sl DOV CES E ELNE tn a E E N EEE NEEE 6 32 JIBTAGKOL ili A EA ta a NR 7 3S A i A l aa A ajar 9 3 4 Speed cadence sensor Optional cisne cid 9 6 MANE outro AT 10 3 6 lNGan Tale sensor OpUON al usaionsviicoialad nuca iii ke ka ter
4. Possible cause Battery capacity too low GPS reception may be interfered with in forests when you are surrounded by tall buildings where there is heavy cloud cover etc Occasionally overloading may result in the device no longer responding The compass should be regularly calibrated There are sources of interference in the immediate vicinity The barometer should be regularly calibrated The corresponding country map may not be available The barometer was not calibrated prior to the start of the track recording Connect the device to a suitable power source or replace the batteries If the device is not being used for a prolonged period please switch it off entirely Press the power button and tap on Switch off Reposition the navigation device if necessary At least 4 satellites are required for navigation This information can be retrieved on the device under Settings gt System General gt GPS Info Carry out a hard reset by holding down the power button for around 3 seconds The device then switches off entirely Recalibrate the compass Make sure that there are no sources of interference such as magnets or high voltage power lines close by When there are breaks in the weather or you experience great gains or losses of altitude you should calibrate the barometer several times a day Please check whether the corresponding detailed map is included with the product or is already preins
5. The chapters are based around the menu structure of the application This means you quickly know where you need to look to find an explanation of a particular function The Glossary explains important terminology to you The Tips and tricks help you to do what you want and quickly get to grips with your device If you have any problems using the device or something seems not to be working the Troubleshooting section may be able to help If this still does not provide you with a solution please contact our Service amp support team The following elements are used in this manual to make it easier to understand Note Information worth knowing Tip Practical application aids Caution Warning notice to prevent any undesired effects Important terms are marked in bold in the text All illustrations similar to actual product Falk PANTERA User Manual 5 4 PANTERA 3 Device description 3 1 Device Power Button N l l Ert at 1 ma lt n aa j FE d A ir rati gt gt Touch Screen Start Stop Button Power Button Switches the device on When you press the power button during use you have the following options Switch off Switches the device off completely Stand by Switches to stand by mode Screen off The screen is switched off ongoing navigations or track recordings remain active This is done to save power Keylock on off Activates or deactivates the keylock The keylock prevents unwanted entries
6. a so 12 Malt SCL CIN nat lat 13 Ar JINAVIGSHOM VIS Wisin idoaidimil dado ampkiridii ima idi ra aaia 13 AD WO GOMMUNG A ina ika eb ien A tr if at ka l l 16 43 Mano UVM Wessnracida cc a onot keteda ita ar art az ai 16 A A 17 Destinattontenti Vi ii a 17 0 A A tt tt ce 17 es MOAK aa 18 60 POMS Ol Mere Sueras corrompido ets 18 6 83 1 Detailed View Of a POM aii e 19 GA PREVIOUS destinations Li 19 0 95 IPOSIIOMZOMMMAD aa fta da Beta tai 20 00 VWWAVDOINS nn 20 67 COM Sidi dictar 21 6 0 Arango Mens idad dto 21 69 Galculated route sita tias 22 Training HIStory i ace eee auetaty 24 7 1 Detailed view of a training UNil oocccncccnonnconcccnonnnoncnononnnncnnnnnnnnnonnnnnnnnnnnnnnnrnnnnnnnnrnnnnnnnnnennnnnss 24 e EGIL THANG UNT dl A ii 25 1 3 Sotaltiralmima WIE tds li len 25 Foal Conven WACK to roul ada 25 oz Stan acallar a 25 03 9 Seta Kk SEAM DOM io 26 My Ume Url A a s n 27 ek AgamstinyUMed FO LIL ab saeta 27 82 AGalMstiny raning SCSS1 OM rr oa 27 80 JAgalbnstifansiered roll aa e el eo aa 28 84 Sanidad O eer es 28 Tour MAN i ie a act aoe Gemcctwenhdaet a a a 29 Qali Create ew TOU cesses eas ee RA kata eo a rn e 29 9 2 iiPlancCiFCUIE ODUOMAl il ga a ad tuned a 29 93 sseleci SAV EC LUN iis ahs ciate taa tea Ma o tba een had Ue aa ies 30 OO Detailed View OR a OU ii iii ii i a ind Gelade taha 31 932r EQIL IO L i daa 31 SINOS oaot oa A aaa 32 10 1 Navigation Settings vii i N A AA d
7. Confirm your entry with The display automatically switches back to the settings menu The address which is entered can be overwritten at any time by entering a new address y 10 4 10 Default settings If you tap on Default settings you can reset the settings of the Falk Navigator to the factory settings the navigation device is automatically restarted when you do this You then have the option via the start wizard of making new settings 10 4 11 Time The Time option allows you to set the time zone and the time format Note The current date and the current time are received with the GPS signal and are thus always set to the nearest GMT 01 00 Set imezone a a 01 09 AM Time Zone Amsterdam Berlin second lt Bern Rome gt To set the time zone in which you are situated tap on the Stockholm Vienna left or right arrow in the top section of the screen 00 An automatic switchover between winter and summer time is preset If vou would prefer to set the summer time manually select On If Off is activated winter time is 9 Automatic displayed On Off Summer time Confirm the settings with Y or exit the display without saving the settings via the X button x Y 10 4 12 Language Tap on Language to select the language in which you want to be guided through the menus in the Falk Navigator The language is always specified in the respective national language Confirm your selection with
8. waypoints will then be displayed sorted in alphabetical order p Kinberg The results are then displaved in a list i l You now have the following options N 4735 559 E 9949 537 Sort the waypoints can be sorted in alphabetical order or Rucksteig by distance 132 N 47034 5224 Y displays the currently selected waypoint on the map m E9 47 931 ere k B ER ae z starts the route calculation to the selected waypoint gt Pfaender l i Double click opens the detailed view for a waypoint 139 N47 30 485 al A Mordor parar amp poa in Chapter 13 2 Falk PANTERA User Manual 20 KOPANTERA 6 7 Coordinates Vou can also enter vour destination via coordinates This function is particularly helpful for reaching a precise location in open terrain where it is not possible to specifv an address Vou can also use the entrv of the coordinates for geocaching Note The entrv format is important here as there are different formats for coordinates dd mm rm rm 01 04 AM The preset format is based on the pattern of Latitude l degrees decimal minutes dd mm mmmm N 48002 6 To seta different format tap on Format on the right A list containing possible formats will then be displaved Vou can change the format again at anv time in the settings see Chap 10 4 7 1 2 With the degrees decimal format the degree of latitude is a 2 entered first 8 To do this tap on the right on N for north nor
9. E l a displays the altitude profile for the calculated route If you have already calculated alternative routes here you can view and compare the altitude profiles for all routes see z 3 13 1 a linge fi here you can set the route options again if necessary a hu T im e 4 e E th ra en Echterdingen A Wi displays the route information with a description for the Route 10 km Duration 0 26 route in a list In the route description each road that the h Destination D 70 U route runs along is shown in the form of a list At the end of art each line the distance travelled along this road is specified x A You can mark a line and click on bix at the bottom to view this section on the map Note The route description is only available in navigation not in bearing mode linear line You can start routing via Y Note The alternatives are also calculated by taking account of the route options entered previously alse l 01 05 AM Alternative routes and altitude profiles If after calculating a route vou have calculated alternative routes thev are shown in different colours on the map Vou can then select an alternative via the boxes at the bottom which are also marked in the relevant colour Vou can then view the different information for the selected alternative 0 26h 40 31h 40 35h U 10 km 11 km 13 km x Y Falk PANTERA User Manual 22 do PANTERA cla You can co
10. GPS Signal Indicates the status of the GPS reception X GPS signal is not sufficientiv strong to allow positioning Signals are being received from fewer than 3 satellites GPS signal is sufficiently strong to allow positioning Signals are being received from 3 satellites WA high quality GPS signal is being received that allows your elevation to be determined Signals are being received from at least 4 satellites Compass Indicates the current compass direction If the compass arrow is shown in red the compass needs to be recalibrated You can calibrate the compass on the settings menu under Settings gt System General gt Calibrate compass Battery The battery symbol shows you the status of the battery E Battery has at least 70 of capacity remaining Battery has between 15 and 70 of capacity remaining 8 Battery has less than 15 of capacity remaining L Device connected to power source y Falk PANTERA User Manual 14 4 PANTERA If you tap on the Zoom Button and then on a point on the map the point is marked with a pin and the address or position is displayed If you then tap on Actions you can for example navigate to the marked point or save the point as a waypoint Clickable POls With just one click on a POI icon on the map you can easily display all the information you need to know about the POls which are shown remember the position start a radius search or select the POI for route calculatio
11. Manager To open the Training Manager use the following buttons or menu options 1 Training Manager button 2 Training Manager menu option The Training Manager has the following functions available e Training Units The training units recorded with your device are being displayed e Training Statistics The training units recorded with your device are currently being statistically analyzed e Compare Training Units Tracks Aufgezeichnete Trainingseinheiten und auf Ihr Ger t bertragene Strecken k nnen verglichen werden e Save Training Units In order to analyze them you first have to save your recorded training units and your transferred tracks on your computer e Transferred Tracks The tracks transferred to your device are being displayed 14 6 1 Training Unit Used to display all the details concerning the training units recorded with your Falk Outdoor navigation device Selecting a training unit In order to select a training unit that is being recorded follow the steps below 1 Select the file you want from the list of training units being displayed 2 Ifthe list of training units is too long you can filter it by moving your mouse over a column label of your choice and then selecting a value that should be used for filtering 3 After this the list will only show training units that match the filter value i e these will be the only training units available for selection 4 To confirm your selection si
12. S gt l 4 gt 7 rt 6 l Cao L Backup device A AN RE a 20 A M nsingen 4 4 ki Si y Mossingen Oschenbachtal e 3 dl ya AFA a BA L sd F y F Gomadingen 4 2 jw f e a 44 l NE ji l yal Pratt Po Kol he i w EU Uh Sonnenbahl pte Engstngen Mk iui _ i ETT AWE We i 4 a P ara AZUR y A gt ar oJ As AN B ttental i AE s rali gt ku p A i RQ j s Restore device 4 Ruchberg Rosencamping rs SY Mehrstetten bpd ce 4 nd a sa Schw bische Ab TA f 4 OS Pts lt lt N J Ni d Pa data odie x5 d de s09 ats E Meilen q 18 gt gt N 5 E v J Kartendaten 2013 GeoBasis DE BKG 2009 Google Nutzunasbedingungen a hler bei Google Ma aps on Detailed information about RR Hiilben Gomadingen Holzelfingen on GPSies com Track Length AO Speed profile Description 62 7 km Required time 6h 15 min Calculated time without pause ca 3h 44 min Bicycle ca 13 h 03 min Pedestrian Descent 1 078 m Ascent 1 075 m ha Vou then have the following possible options Back up to PC The selected GPX file from one of the two windows can be saved to a freely selectable directory on the PC Delete Deletes the selected GPX file from the device Import Imports a GPX file from a PC to your device To be able to manage the GPX files the files to be imported must first be imported to the Navi Manager Update Updates the content of the windows if for example you have im
13. View options such as Satellite and Street map are found on the upper right edge of the map view When you click on a waypoint a layer with details concerning the waypoint will be displayed p Falk PANTERA User Manual 54 _ KOPANTERA On Falk de Google Earth and lots of other websites a large number of points of interest POls are available for you to download If these POls exist in a KML or KMZ format you can transfer them to vour navigation device via the KML import plugin of the Navi Manager Visit the corresponding website from which vou want to download the KML files e g www falk de KML files from falk de On www falk de vou enter on the entrv menu top left an address within whose surroundings vou would like to search for POls On the right next to this entrv area vou can select a theme for the search e g restaurant cinema etc To complete your entries you confirm them with the button display Below the entry area you will see a dropdown list of POIs In addition you will see a map display with the POIs marked on it To select the POI which you want to transfer to your navigation device click directly on the map on the corresponding POI or select is by clicking on it from the dropdown list After a POI has been selected an info window for the POI appears Now select the Tool button A list will open up Now select Save and For my Falk Navi The POI is saved as a KML file on your PC KMZ KML files fro
14. entry you can also simulate the ta Y calculated route here not where there are several stations The route is run through virtually here You will see on the map how the route proceeds and when and how turns are made To do this tap after calculation on For routes with several stations you can add destinations to the tour by tapping on the Add further destinations button and then Add station All kinds of destinations can be used as stations The different kinds of destinations are entered in the same way as with normal destination entry Once you have entered all destinations tap on You will then be asked to save the route under a name which you are free to choose When you confirm the name the tour is created You can start the routing by tapping on Y again You can choose whether the route calculation should start from your current position or the first station 9 2 Plan circuit optional Tap in the tour planner on Plan circuit Here you can start pidas dt WO 1 07 AM a circuit from a stipulated starting address Here too the preset starting point is your current location Via O you can enter another starting point J After the starting point has been entered you can either Plan tour specify the distance you want or the length of time around the circuit The Falk Navigator then calculates a circuit which reflects the route options that have been set and takes you back to your starting point Plan ci
15. good reason shall be deemed to exist in particular if the Licensee fails to comply with the restrictions on use stipulated in 2 or breaches the terms and conditions for passing on the software laid out in 3 and does not stop this behaviour immediately even after receiving a written warning with a threat of withdrawal If permission to use the software is withdrawn the Licensee must destroy the original data carriers and any copies which exist and delete any data and software which is stored completely and irreversibly It must provide the Licensor with a written assurance that the items have been completely destroyed and deleted Statute of limitations The Licensee s claims on account of defects shall become statute barred within a year If the 8 objects of the contract are new moveable assets and the Licensee is a consumer all claims shall only become statute barred after 24 months The statutory regulations shall apply to instances of premeditated or fraudulent behaviour if there is personal injury or in the case of claims under the German Product Liability Act The start of the period of limitation shall be governed by the statutory regulations Final provisions The agreement reached here shall be governed by the law of the Federal Republic of Germany to the exclusion of the UN Convention on Contracts for the International Sale of Goods The place of performance for all obligations arising there from shall be Esslingen Germany
16. number ta Vou can also tap on the citv name or street name in the text box to confirm the entrv Note If you do not wish to further restrict your search by selecting a street and or street number and simply want to navigate to the centre of the destination city simply tap on 70 Stuttgart after selecting the city with mi you just want to navigate to a street without a street number tap after A C D m entering the street on The button allows you to view the destination on the K map in advance P If you tap on the country flag in the upper section of the U screen you can select the destination country if you have also installed other country maps Y To enter umlauts or special characters press on the PE corresponding basic letter for a long time ta o gt oe Once you have entered a letter all of the letters which are no longer possible will be blanked out If you tap on oe a list containing all possible city names for your entry will be displayed Falk PANTERA User Manual 17 z KOPANTERA 6 2 Home it The Home function takes vou back home without anv bother at anv time When vou first start the device vou will be asked to enter vour home address After you have entered your address once it is saved and you can navigate there at any time by tapping on Home once The route from your current position to your home is calculated immediately You can change the saved address in the settings menu at an
17. on www falk navigation de under Service gt Navi Manager After download is complete double click on the file setup exe and then follow the instructions given by the installation wizard Now connect your navigation device to your PC via the USB cable To start the Falk Navi Manager click on the Windows Start menu Start Programs Falk Navi Manager or if necessary on the Navi Manager icon which was placed on your desktop when installation took place The Falk Navi Manager then opens up 14 2 Import of GPX files GPX is the most common file format for saving tracks geocaches and waypoints There are numerous portals and providers on the internet that offer tracks to download If they are in GPX format they can easily be transferred to your device and utilised To transfer GPX files from a portal to your device you must first save them on your PC Then choose GPX Manager at the top in the Falk Navi Manager The GPX manager shows all GPX files on the PC or on the device in a list Falk PANTERA User Manual 48 PANTERA Falk Falk Navi Manager 218 x File View Options Service Plugins GPX Manager 7 GPX file A Training Manager Hame Date Size Or IOR Pn ere STE eS pn Storage loc Ci Import 2013 05 14 09 02 gpx 14 05 2013 2013 05 17 06 24 gpx 17 05 2013 225 KB Copy Backup Rr H lbenGomadingenHolze
18. options can be changed 10 1 1 Route options The route options allow you to define your own individual route My route The route options include two settings the route optimisation and the type of routes These settings are run through as standard after each route calculation With the route optimisation you have various options for adapting the route Flat the route preferably runs over flat sections Mountainous the route preferably runs over hilly sections Short neutral e Calculates the shortest route to the destination regardless of inclines it Linear distance lt plots a straight line from your current location to the destination bearing navigation Note The selected route optimisation also has an impact on the length of the route For example if you choose flat sections of the route with an incline that is too steep will be avoided which can result in a longer route With the types of routes you have the following options SO Cycle paths uses or avoids cycle paths only in bicycle mode Hiking trails uses or avoids hiking trails hiking trails can be preferred in pedestrian mode Steep gradient uses or avoids gradients of over 8 only in bicycle mode Road ratti uses or avoids roads only in bicycle mode Turns LOA allows or reduces turnoffs on the calculated route Falk PANTERA User Manual 32 KOPANTERA Paths ee uses or avoids routes along pat
19. relate to the user and the bicycle profiles as well as the settings relating to the fitness sensors Edit user profile 10 3 1 Edit user profile l Gender Male gt You can set your user profile here The values of the User Se profile are required among other things to allow your calorie consumption to be calculated Year of birth 1980 gt You can make the following settings here which you select by tapping on the respective line Height 180 cm gt Gender select Male or Female Year of birth enter your year of birth here Height enter your height in cm here Weight 80 kg gt Weight enter your current weight here Confirm your entries in each case by tapping Y da 01 08 AM Q 10 3 2 Change bike profile Q Here you can change the bike profile You can choose from four profiles which you can configure yourself see Chap 10 3 3 Select the profile you want bike 1 3 and walker profile and ig Mountainbike confirm by tapping Y j Trekkingbike Wanderprofil x Y Sr 10 3 3 Edit bike profile Rennrad Ab Here you can edit the bike profile which is currently chosen as well as view all of the statistics for this profile Bike type A To do this first select the bike profile that you would like to edit see Chap 10 3 2 Weight incl equipment 9kg gt You have the following options for editing the current profile Bike type select the bike type for this profile here Th
20. the products of Falk Outdoor lt is a simplified outdoor map but still fully routable The map shows a more or less comprehensive network of routes and in some places also cycle paths and footpaths depending on the data provided by OpenCycleMap OpenStreetMap In contrast to the Premium Outdoor Map this map is not quality tested but rather is based on the information provided by a free community on the internet For this reason there is no road classification and there may be limitations in the quality of routes The coverage of the network of routes is less than that of a quality tested Falk Premium Outdoor Map The map shows a simpler representation of the surface area and contains fewer points of interest However the familiar design of the Falk Premium Outdoor Map has been kept in order to make it simple to embrace the world of outdoor navigation of Falk Outdoor Basic Maps Plus are offered for a large number of European countries Others will follow and can be downloaded and transferred to the device via the Falk Navi Manager It is also possible to navigate by moving from a Premium Outdoor Map to a Basic Map Plus Premium Outdoor Map optional The quality tested Falk Premium Outdoor Maps offer a maximum level of information for outdoor use The maps are developed in collaboration with outdoor specialists e g KOMPASS cycling and hiking maps and offer comprehensively standard uniform coverage In addition to the road network for a coun
21. the functions become mixed up you can tap on Y to restore them to the preset order Falk PANTERA User Manual 43 KOPANTERA 11 Active route Gs If you have calculated a route and are in navigation mode you have the following options under Active route Calculate alternatives calculates two alternative routes Enter stop off point here you can enter a stop off point which is then navigated to before the destination which has already been entered Next destination if you have entered a stop off point or are on a tour you can navigate to the next destination here Current tour profile if you are travelling along a tour you can view the entire tour profile here Falk PANTERA User Manual 44 KOPANTERA 12 Transferred tracks Under Transferred tracks you will find all tracks that you have transferred to your device Here you can also delete imported tracks from your device again You can search for the name of a track by tapping on mo When you select a track and tap on you are shown the detailed view for the track Tapping on again starts the routing When you start a saved track you have the possibility of deciding whether you want to start the track directly or want to convert it into a route in order to receive turn off instructions in the form of a beep In addition you can select whether you want to travel to the starting point of the track or to the point on the track nearest to your current posit
22. tracks or waypoints they contain are also displaved in the track manager or wavpoint manager Note To delete imported waypoints the corresponding GPX file must be deleted Compass A compass is a measuring instrument for determining the cardinal direction The compass icon on the navigation view screen shows you the north bearing If you display the compass in a large scale view via the rapid access menu the entire map is orientated in the direction you are looking Favourite lists A compilation of several points of interest is a favourite list You can create your own points of interest via the Falk Online Community You can then also compile the points of interest to create favourite lists or use favourite lists and points of interest from other users Circuit In the case of a circuit the starting point and end point are identical Either a route length or your preferred travel time can be entered An appropriate route is calculated automatically from these details Point of interest A point of interest POI is an address or position of special interest such as restaurants interesting sights museums and many more besides The points of interest on your device are divided up into various categories to make it easier to search for specific destinations Additional points of interest can be transferred to the device via the Falk Online Community see Chap 14 8 1 Coordinates Positions can be determined precisely with the aid of coord
23. 62 20 lOs Nada a ad 63 21 Licence terms and conditions iii da diia 65 4 PANTERA 1 Safety instructions and maintenance 1 1 Safetv instructions The device may only be stored at temperatures of from 20 C 70 C and be operated at temperatures of from 10 C 60 C Keep your device away from extreme temperatures The device should only be operated and stored in an atmospheric humidity of from 0 to 90 Do not expose your device to sudden great fluctuations in temperature This could result in condensation collecting in the device which could damage it If any condensation forms wait until the device has completely dried out The device is waterproof in accordance with the IPX4 standard This means that the device is protected against splash water Please note In order to ensure that the device is protected against the ingress of water make sure that the rubber cover for the USB port on the bottom of the device is completely closed You must not place store or leave your product in or next to heat sources at places which have high temperatures or a high level of solar radiation in a microwave oven or pressurised container and you must also not expose it to any temperatures of over 60 C 140 F Use only Falk original accessories or Falk approved adapters The use of other components may result in malfunctions and or serious damage Caution e This navigation device for outdoor use is merely an orientation and navigat
24. S SHALL NOT BE LIABLE TO YOU IN EW OF ANY CLAIM DEMAND OR ACTION IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM DEMAND OR ACTION ALLEGING ANY LOSS INJURY OR DAMAGES DIRECT OR INDIRECT WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION OR FOR ANY LOSS OF PROFIT REVENUE CONTRACTS OR SAVINGS OR ANY OTHER DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION ANY DEFECT IN THE INFORMATION OR THE BREACH OF THESE TERMS OR CONDITIONS WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY EVEN IF UNITED NAVIGATION GMBH OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Some States Territories and Countries do not allow certain liability exclusions or damages limitations so to that extent the above may not apply to you Export Control You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with and with all licenses and approvals required under applicable export laws rules and regulations Entire Agreement These terms and conditions constitute the entire agreement between United Navigation GmbH and its licensors including their licensors and suppliers and you pertaining to the subject matter hereof and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter Governing L
25. The parties agree that Esslingen Germany shall be the place of jurisdiction for all disputes arising from this licence agreement if the Licensee is a trader or is of equal standing to a trader or if its registered office or branch office is abroad End User Terms The data Data is provided for your personal internal use only and not for resale It is Falk PANTERA User Manual 67 KOPANTERA protected bv copvright and is subject to the following terms and conditions which are agreed to by you on the one hand and United Navigation GmbH and its licensors including their licensors and suppliers on the other hand O 2012 NAVTEQ Austria O Bundesamt fur Eich und Vermessungswesen Croatia Cyprus Estonia Latvia Lithuania Moldova Poland Slovenia and Ukraine O EuroGeographics France Source Georoute IGN France amp BD Carto IGN France Germany Die Grundlagendaten wurden mit Genehmigung der zustandigen Beh rden entnommen Great Britain Based upon Crown Copyright material Greece Copyright Geomatics Ltd Hungary Copyright 2003 Top Map Ltd Italy La Banca Dati Italiana e stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana Norway Copyright 2000 Norwegian Mapping Authority Portugal Source IgeoE Portugal Spain Informacion geografica propiedad del CNIG Sweden Based upon electronic data National Land Survey Sweden Switzerland Topografisch
26. When the recording is ended you can enter a name for the training session You can also find all training sessions under Training history see Chap 7 8 3 Against transferred route Here you can compete against a route which you have transferred to your device To do this the route must contain data on the times which have been recorded Select a route from the list and tap on to start Double clicking on a list entry opens the detailed view for the route The way you can transfer routes to your device is explained to you in Chapter 14 on the Falk Navi Manager 8 4 Starting a time trial Once you have selected a segment the time trial can begin First of all you can select whether the chosen segment should be converted into a route or be started directly If it is converted into a route you receive turnoff instructions You are then initiallv guided to the starting point A message warns you 200 m before the start of the time trial At the starting point another message is issued to indicate the start On the time trial view you can track exactly where you are diy MM 11 55 currentiv placed compared to vour fictitious component q F di 2 3 0 The altitude profile shows the course of the route with the ie inclines The red arrow shows vour current position vour 1 2km 340m opponent is indicated bv a white arrow B 40 12 min T Vour deficit or lead is also displaved as a distance and time figure If you are ahead the val
27. ability pursuant to 69e of the German Copyright Act from reengineering reverse engineering reassembling translating or editing or amending in some other way the object code of the software In particular the software and data and the results achieved by using them may not be used to create a dedicated product for the Licensee Any type of reproduction of the accompanying material data carriers software and data in particular copying to data carriers and the provision of it for remote data transfer and or transmission by remote data transfer is prohibited Exceptions to this are the one off installation of the software from the data carriers which are supplied with it to the hard disk the inevitable non permanent copies made as a result of the use pursuant to 2 paragraph 1 and the downloading or printing out of data from the application which is running exclusively for personal use One off installation shall also be authorised if the software has been deleted beforehand irreversibly and in full from the computer on which it was installed and it is only then subsequently reinstalled on the same computer or on a different computer Another exception to the prohibition on reproduction is the creation of a back up copy where this is necessary to safeguard future use of the software exclusively for personal use as assumed by the contract This copy must be explicitly identified as a back up copy and may only be used as such It must re
28. also select your own icon if one exists from your PC This icon should have a resolution of 72 dpi and the image size 16x16 pixels Finally confirm your entry again with the Next button If you do not specify your own icon the default icon shown will be used for displaying the POI on the map The final window once again summarises the information for the POI category which is to be imported When you press the Complete button you start the conversion process the KML file is converted into the Falk format Note The conversion may take a little time The converted POI category appears automatically after a few seconds under the My favourites tab The POI category is now located on the PC To transfer the POI category to the navigation device you must click on the right hand side of the window on the button Copy PC gt Flash or Copy PC gt SD card Following successful transfer your own POI category is available on the navigation device for further use e g for radius searches or navigation operations Falk PANTERA User Manual 56 KOPANTERA Note The POls which are imported via the KML import plugin cannot be rated on the navigation device 14 8 Falk Online Community 123POl com In addition to the preinstalled points of interest vou can create vour own points of interest in the Falk Communitv and then transfer them to vour device There you have the possibility of adding a descriptive text and also pictures to your POls Yo
29. ans that the station has already been visited on the ta i w current tour Number of stops 4 Route profile N 46 45 598 When you tap on Y the tour is started To make further settings in relation to the tour tap on see under Chap 9 3 2 9 3 2 Edit tour To edit a tour first select a tour and then tap on Y Tour options diy AM Now tap on The following setting options are then available to you ji Edit stations ef Here it is possible to add further Edit stations Set direction stations change the sequence of the stations and delete of travel stations again F Edit name Delete tour Set direction of travel ee Here you can reverse the tour The stations will then be navigated to in reverse order Edit name f _ Here you can edit the name of the tour Delete tour Y Here the selected tour can be deleted da Falk PANTERA User Manual 31 KOPANTERA f k 10 Settings b The settings for vour device are divided up into four categories The navigation settings relate to the routing the map settings comprise all functions of the map the profile sensor settings relate to the set up and all settings of the profiles and sensors and the svstem general settings relate to the device or the application as a whole 10 1 Navigation settings bi Here vou can make various settings relating to the routing To do this click in the menu on Settings gt Navigation Settings The following
30. ave selected a waypoint from the list you can display the waypoint on the map by clicking on navigate there directly by clicking on Wor call up the detailed view with a double click The detailed view offers similar possibilities to the detailed view for a point of interest 13 2 2 Create waypoint bes You have various possible options for creating a waypoint You can Waypoint manager diniElO1 10 AM H Choose Create Waypoint Waypoint a Delete created Waypoints Use your current position enter an address select a position on the map use one of your previous destinations enter coordinates or select a point of interest Entry then takes place in the same way as when entering a destination see Chap 6 6 Falk PANTERA User Manual 46 KOPANTERA Once the destination has been defined vou are asked to enter a name for the new wavpoint In the row for the name initiallv the address or the geocoordinates of the wavpoint are automatically displayed However it is advisable to assign an appropriate name to each waypoint particularly if several waypoints have already been created You can change the name by pressing the back button for a long time and entering another name Confirm the name with Y and the waypoint is then saved 13 2 3 Delete created waypoints y To delete a waypoint that you have created yourself tap on Delete created waypoints One or several waypoints can then be mark
31. aw The above terms and conditions shall be governed by the laws of The Netherlands without giving effect to i its conflict of laws provisions or ii the United Nations Convention for Contracts for the International Sale of Goods which is explicitly excluded You agree to submit to the jurisdiction of The Netherlands for any and all disputes claims and actions arising from or in connection with the Data provided to you hereunder Government End Users If the Data is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government the Data is a commercial item as that term is defined at 48 C F R FAR 2 101 is licensed in accordance with the End User Terms under which this Data was provided and each copy of the Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following Notice of Use and shall be treated in accordance with such Notice Notice of use USE Contractor Manufacturer Supplier Name NAVTEQ Contractor Manufacturer Supplier Address 222 Merchandise Mart Plaza Suite 900 Chicago Illinois 60654 This Data is a commercial item as defined in FAR 2 101 and is subject to the End User Terms under which this Data was provided 2012 NAVTEQ All rights reserved Wenn der zustandige Beamte eine Bundesagentur oder sonstige Bundesbeamte den vertraglich verei
32. being made via the screen To deactivate the keylock press the power button again and then Keylock takes you back to the application Note If the device stops responding and can no longer be operated press the power button for approx 3 seconds The device will then restart Start Stop Button Starts or pauses the recording of a training session or a timed route see Chap 8 1 If you press it long while recording the recording will end Touch Screen Displays the map and the menu To make entries or select functions use your finger to tap on the appropriate point on the screen Falk PANTERA User Manual 6 SOPANTERA USB connector socket for the bracket USB Connector Connector for charging up the battery via the adapter or for connecting the device to a PC via the USB cable The connector is located beneath a rubberised cover Pull this up to connect a cable Note The rubberised cover also provides protection against the ingress of water Make sure that it is always completely closed when using the device 3 2 Bracket To attach the bracket to the bicycle you must plug the cable ties which are also supplied in the manner shown in the drawing through the slots in the bracket which are provided for this purpose and then pull them tight around the handlebar or stem Please first attach the bracket to the bicycle before you fix the device on it The cable ties can also be opened again if you pull the small nipple on the
33. cluding their licensors and suppliers and you relating to the subject matter thereof and in their entirety they replace without exception all written or verbal agreements which had been concluded between us in relation to this subject matter Applicable law The abovementioned General Terms and Conditions are subject to the legal regulations of Germany without any influence on i their impairment of legal provisions or ii the United Nations Convention for Contracts for the International Sale of Goods which is explicitly excluded You agree without exception to pass on all disputes demands and claims arising as a result of or in connection with the data provided to you under this agreement to the jurisdiction of the court in Stuttgart Falk PANTERA User Manual 71
34. ction to the Falk Navi Manager The following explanations relate to version 2 8 of the Navi Manager If you are now using a newer version vou will find information about this in the program help section Vou can access help via the 7 in the menu bar of the Navi Manager program interface There vou will also find detailed information about the functions which are outlined below as well as about other functions With the Falk Navi Manager you are able to transfer country maps speakers POIs and GPX files to your device or from the device to your PC In addition you can transfer individually compiled content from the Falk Online Community to the device via the Navi Manager As the memory capacity on your navigation device is limited the Falk Navi Manager also offers you the possibility of managing your data by for example only saving the data which is currently required on your navigation device and downloading other data onto a memory card or your PC The Falk Navi Manager provides you with the following further functions Import of GPX files Setting up activating and changing the theft protection POI import from for example Google Earth Installation of software updates Installation of the maps Creation of a device back up optional 14 1 Introduction to the Falk Navi Manager You must first install the Falk Navi Manager on your PC To do this you must first download the program from the internet You will find the Navi Manager
35. cularly well The training unit is used to record the entire route from the start to the finish l i l start training unit start time trial End time trial End training unit Select a timed route from the list and tap on Y to start Double clicking on a list entry opens the detailed view for the timed route in which you can see all the information you need view the route on the map and view the altitude profile To record a timed route yourself tap on the Start Stop button on the outside of the device and then under Timed route on the Record button 00 If during the recording you press again on the Start Stop button you can end the recording When the recording is ended you can enter a name for the timed route Tip Give your timed routes descriptive names which will help you to find them faster at a later date e g Forest route up to mountain 8 2 Against my training session As an alternative to a timed route you can also compete against one of your recorded training sessions Select a training session from the list and tap on Y to start Falk PANTERA User Manual 27 KOPANTERA Double clicking on a list entrv opens the detailed view for the training session To record a training session yourself tap on the Start Stop button on the outside of the device and then under Training session on the Record button B If during the recording you press again on the Start Stop button you can pause or end the recording
36. device Falk PANTERA User Manual 61 KOPANTERA 19 Service amp support To provide optimum support to customers Falk has set up a service centre which handles all warranty claims and repairs If you have any questions about the guarantee and warranty please feel free to contact the technical hotline 49 1805 003233 0 14 min from a German landline mobile phone prices may vary max 0 42 min In the event of a technical defect within the guarantee period you can also register the device for a free repair on the following website http www falk outdoor com en service en guarantee processing html Scope and duration of the warranty United Navigation GmbH guarantees for a period of 24 months battery 6 months from the purchase date that at the point in time of the transfer of risk the product is free of any material defects and defects of title in accordance with Sections 434 435 of the German Civil Code If a product which is supplied has evident material or manufacturing defects which also include damage caused during transportation the defect must be complained about immediately In other respects the statutory regulations pursuant to Sections 434 ff 475 para 1 of the German Civil Code apply Proof of purchase is required to make a claim under the guarantee The gurantee does not cover defects which have been caused by improper maintenance unauthorised attempts to open repair and or modify the pr
37. device a prompt will immediatelv appear asking vou to save vour data If you interrupt the saving operation you will be asked to save the newly found training units and tracks the next time you start the Training Manager 14 6 4 Transferred Tracks This function can be used to analvze tracks that have been transferred to vour device using the GPX Manager The actual values shown will depend on the data in the transferred tracks Selecting a transferred track In order to select a transferred track follow the steps below 1 Select the file you want from the list of transferred tracks being displayed 2 If the list of transferred tracks is too long you can filter it by moving your mouse over a column label of your choice and then selecting a value that should be used for filtering 3 After this the list will only show tracks that match the filter value i e these will be the only training units available for selection 4 To confirm your selection simply click on the Show details button Training unit view Detailed data The left side will show all available details concerning the tracks you transferred If no values are shown no values are available in the data Map view 1 The map view has the following features available 2 View of the training unit being recorded in the form of a line on the map view 3 You can move the map with the arrows or with the hand icon 4 You can change the level of zoom with and 5
38. e copy amend separate take apart or reverse engineer any part of the data in any other way and not to transfer or disseminate it in any form and for any purpose apart from to the extent that mandatory laws permit Restrictions If you do not have a special licence from United Navigation GmbH to do so and without restricting the previous paragraph you may not utilise this data with all products systems or applications which are installed or connected in some other way or in connection with vehicles which are capable of vehicle navigation positioning processing real time routing fleet management or similar applications or b with or in connection with all positioning devices or all mobile or wireless electronic or computer devices including and without restriction to mobile phones palmtops and handhelds pagers and electronic organizers or PDAs No guarantee This data is provided to you as it is and you agree to use it at your own risk United Navigation GmbH and its licensors and their licensors and suppliers do not grant any explicit or implicit guarantees assurances or warranties arising from the law or some other source Included within this but not restricted thereto are content quality accuracy completeness effectiveness reliability suitability for a particular purpose usefulness benefits or results produced from this data or the fact that the data or servers do not terminate or work without any errors Warranty disc
39. e route calculation and the maps used are adapted for you on Wheel size 2120 mm gt the basis of this specification Weight incl equipment here you should specify the total weight of the bike and your equipment in kg Map Premium Wheel size here you should specify the wheel size of your priority road map bike that you are using for this profile A O le aaa N a SE The following list gives you an Overview of the customary dan tvpe designations for the tvres and the associated wheel size in mm Falk PANTERA User Manual 36 KOPANTERA The type designation can generally be read off the tyre 24x1 75x2 44 559 26x2 00 28x1 1 2 Map priority here you can stipulate which map type is preferred for this profile You will find detailed information about the map priority in the following chapter 10 3 4 Name here you can change the name for the profile Full statistics here you will find the overall distance covered and the total ascent which have already been accomplished with this profile You can also correct these details by tapping on 10 3 4 Map priority Only one country map at a time can ever be used for a country If you have installed several country maps for a country on your device e g Basic Map Plus Germany and Premium Outdoor Partial Map Germany you can set the priority of the map to be used This will then be used both for the map display and in the address entry To do this proceed as follo
40. e Grundlage Bundesamt fur Landestopographie All rights reserved Terms and Conditions Personal Use Only You agree to use this Data together with Falk Navigator for the solely personal non commercial purposes for which you were licensed and not for service bureau time sharing or other similar purposes Accordingly but subject to the restrictions set forth in the following paragraphs you may copy this Data only as necessary for your personal use to 1 view it and ii save it provided that you do not remove any copyright notices that appear and do not modify the Data in any way You agree not to otherwise reproduce copy modify decompile disassemble or reverse engineer any portion of this Data and may not transfer or distribute it in any form for any purpose except to the extent permitted by mandatory laws Multi disc sets may only be transferred or sold as a complete set as provided by United Navigation and not as a subset thereof Restrictions Except where you have been specifically licensed to do so by United Navigation and without limiting the preceding paragraph you may not a use this Data with any products systems or applications installed or otherwise connected to or in communication with vehicles capable of vehicle navigation positioning dispatch real time route guidance fleet management or similar applications or b with or in communication with any positioning devices or any mobile or wireless connected elect
41. ed above you can now follow a route from Frankfurt on the Basic Map Plus Germany as far as the Austrian border As the Trans Alpine Premium Outdoor Map also covers the whole of Austria you will be routed all the way through Austria on this map In Italy you will then be routed on the Basic Map Plus Italy as the destination Florence is no longer covered by the Trans Alpine Premium Outdoor Map Basic map Plus OSM Stipulates that the Basic Map will always be used even if a Premium Outdoor Map is available for this country or part of this country Weitere Informationen zu den verschiedenen Kartentypen findest du im Glossar sib 10 3 5 Fitness sensors Your Falk PANTERA is designed for coupling several ANT fitness sensors You can couple a heart rate sensor a speed sensor and a cadence sensor to the device which will provide you with up to date and accurate figures at all times while you are on the move How you attach the sensors is explained to you in the device description right at the start of the manual When you first call up the Fitness sensors function you are guided through the process of coupling up the individual sensors Follow the instructions provided on the device If the coupling has already been carried out here you can view a list of the sensors and their respective status Falk PANTERA User Manual 38 KOPANTERA Heart rate monitor Once vou have coupled up a heart rate sensor here vou see the ID of the sens
42. ed from the complete list and deleted by clicking on Note Imported waypoints can be deleted by deleting the corresponding GPX file in the GPX manager see Chap 13 3 13 3 GPX manager f The GPX manager contains all of the GPX files that are located on vour device These can be either tracks that vou have recorded vourself or imported GPX files Here vou can also delete imported GPX files from the device Note The imported tiles mav contain tracks tours and wavpoints Thev are also displaved in each case in the track manager and wavpoint manager Caution When vou delete a GPX file all of the elements contained tracks tours and or wavpoints are deleted Tip If you want to delete a GPX file but would like to keep a waypoint from it simply save the wavpoint under a different name before vou delete the GPX file 13 4 Help Help takes you to the online help containing brief operating instructions for your navigation system On each screen on which you see the symbol you can tap on it and you will be guided directly to the chapter in the Help section which deals with the corresponding topic This allows you to find an explanation about the respective function quickly in lots of different contexts In addition in the Help section you can select Demonstrate functions to get a demonstration of certain functions Falk PANTERA User Manual 47 KOPANTERA 14 Falk Navi Manager In this chapter vou are given a brief introdu
43. ee or third parties and also from natural wear and tear provided that the Licensee is not able to demonstrate that the defect is independent of this Liability 6 The Licensor shall pay compensation or refund wasted expenditure no matter what the legal ground for this is only to the following extent if the Licensor its legal representatives or vicarious agents have acted with specific intent and if a guarantee has been provided in full in respect of the agreed quality if the Licensor its legal representatives or vicarious agents have acted with gross negligence to the level of the predictable loss which is typical for the contract and should be prevented by the duty to exercise due care in other cases only when a substantial contractual obligation is breached and when there is a delay specifically for reimbursement of the typical and predictable loss Statutory liability in the event of culpable loss of life physical injury or damage to health and in accordance with the German Product Liability Act shall remain unaffected The Licensor shall be at liberty to claim contributory negligence If any data is lost the Licensor shall only be liable for losses which would have occurred even if the Licensee had backed up its data properly Term of the contract l 2 7 The contract shall run for an indefinite period of time The Licensor is entitled to withdraw permission to use the software for a good reason at any time A
44. fastener upwards wok a Falk PANTERA User Manual 7 4 PANTERA To secure the device on the bracket insert it into the bracket with the bicycle bracket base and lock it securely in place by turning it to the right Check before each ride whether the device is firmly secured Falk PANTERA User Manual 8 SOPANTERA 3 3 Sensors Your Falk PANTERA is designed for ANT fitness sensors to be coupled on The optional combined speed and cadence sensor wirelessly transmits the current speed and the cadence to the device The optional heart rate sensor in a chest strap wirelessly transmits the current heart rate to the device This product is ANT certified Visit www thisisant com directory for a list of compatible products and apps ANT 3 4 Speed cadence sensor optional To attach the combined cadence and speed sensor you must secure it to the frame of your bicycle with the cable ties as shown Make sure that you secure the sensors pointing downwards and with the correct side facing the wheel as shown in the drawing Falk PANTERA User Manual 9 4 PANTERA 3 5 Magnets You must secure the magnet for the speed sensor S sensor to a spoke Assemble it as shown here and screw it tight onto a spoke so that it runs past the sensor when the wheel rotates Make sure that the speed sensor S sensor and the magnet are no more than 5 mm apart Move the sensor on the frame so that the gap i
45. ference system WGS84 The following formats are available to you dd ddddd decimal degrees dd mm mmmm decimal degrees and minutes dd mm ss ss decimal degrees minutes seconds dd mm KILNA GauB Krilger easting northing reference system WGS84 Swiss grid longitude latitude UTM zone easting northing dd mm ss ss reference system WGS84 This setting is then used in the entire system PR E Note UTM and Gau B Kruger are formats from printed x Y maps You can read the coordinates off such maps and enter them in the device G 10 4 8 Screen auto off You can use this function to set whether and after what period of time the screen automatically switches off You can choose between 15 seconds 30 seconds and 1 minute In addition you can select whether the keylock should also be activated at the same time so that no accidental entries are made Note While your screen is switched off existing navigation operations or track recordings continue to run If you press the hardware key when the keylock is active or click on the screen the screen is activated again Beeps continue to be output This function helps you to extend the life of the battery Falk PANTERA User Manual 41 4 PANTERA 10 4 9 Set home The Set home option allows you to change your home address which you entered when you first started the device Tap on Set home You can enter your home address via the on screen keypad
46. format Start the Navi Manager On A C Users Kosmo Downloads KML_Samples kml SO the Navi Manager screen j f th b The selected file contains 4 POls interface In he menu bar Simple placemark under Plugins call up the Ta Att menu item KML Import das Plugin Here you will then see the window for the import wizard You can acknowledge this with the Next button With the aid of the Select button you can select the KML or KMZ file on your PC which you would like to transfer to your navigation device Once you have selected a file a list of the POls in it appears beneath it Press the Next button In the next window you must Falk KML Import Manager step 3 6 assign an individual category name for your POI category gt Category name and description You also have the option Define a name for the new category here of providing more details You have the option of entering a descriptive text This text will be displayed in the Falk Navi Manager in about the particular POI the Description column category Once you have a provided the POI category vo with a name and the information you want confirm your entries again with the Next button In the next step you have the option of selecting an icon to be displayed on the map with m on the respective POls A small selection of icons are suggested for vou Description This is my favourite list of camping grounds around Stuttgart However you can
47. formation is the sole responsibility of the individual dealer The name and logo of NAVTEQ LOGIBALL KOMPASS Karten GmbH BKG trademarks and logos of NAVTEQ and NAVTEQ ON BOARD LOGIBALL KOMPASS Karten GmbH BKG and other trademarks and trade names which are the property of Navteq LOGIBALL KOMPASS Karten GmbH BKG may not be used for commercial purposes without the prior written Falk PANTERA User Manual 70 4 PANTERA permission of the respective owners Export control You agree not to export any part of the data provided to you and other direct products therefrom from whatever location apart from in compliance with and in accordance with all the necessary licences and permits the applicable export laws regulations and provisions Compensation You agree to compensate United Navigation GmbH and its licensors including their licensors suppliers authorised agents subsidiaries or affiliated companies and their employees managers workers shareholders or agents or representatives of them for protect against and indemnify against any form of liability loss injury including injuries which result in death claim action costs expenditure or demands of any kind and nature including but not limited to legal costs which arise as a result of or in connection with any use or any possession of data by you Overall agreement These General Terms and Conditions form the overall agreement between United Navigation GmbH and its licensors in
48. he device You can then select whether vou want to record a training session or a timed route see Chap 8 Tapon the training session Record button A message confirms the start of recording Note It is recommended that you calibrate the barometer manually before you start the recording see Chap 10 4 6 The recording can be interrupted at anv time if for example vou take a break To do this tap on the Start Stop button again and then on the Pause button To continue tap on the Start Stop button and then again on the Pause button To end the recording tap on the Start Stop button for a long time or first on the Start Stop button and then on the Stop button You will then be asked to specify the name for the track In the line for the name initially the date and the time of the recording are displayed The track can be saved under this designation Or you can delete the name line with El ana enter your own name for the track You can also cancel the recording if you tap on W Note lt is advisable to enter a recognisable name for tracks so that you can find them more easily at a later date if several tracks are saved on the device 7 1 Detailed view of a training unit Training unit ia To select an existing training unit tap in the list on the unit Info Map Alt profile you want and then on dip Sonntagsrunde E e A na Info displays all the information about the training unit The Date A 2 47 12 displayed inf
49. he list of POls 6 4 Previous destinations ee This function allows you to select the previous destinations that you entered very easily The previous forty destinations are automatically saved Falk PANTERA User Manual 19 PANTERA ap daa 01 03 AM 6 5 Position on map Grunstrafe D 73728 Esslingen j Here you can mark a point on the map in order to navigate te there You can also move the map here using your finger If a point which is located in a city or on a street is marked WoS pAr the address for this point is displayed Otherwise the sslingen IN E geocoordinates are displayed A is Tip Zoom out via the minus button so that you can move the map to the correct point more quickly 6 6 Waypoints e A waypoint is a position or address which has been saved You can create waypoints yourself see Chap 13 2 2 so that you can then navigate to the point again at a later date Here you can now select a destination from the wavpoints which are located on your device These may be waypoints you have created yourself or imported waypoints To do this a search centre must first be stipulated The waypoints are then displayed sorted according to their distance from this point The search centre can be your current location the current destination along the route a city an address a position on the map or coordinates As an alternative to a search centre you can also tap on Display all waypoints all
50. he navigation device by USB cable to the PC Initially proceed in the manner described in the introduction In the opened Falk Navi Manager you will find the Service item in the menu bar Select the subitem Falk Route Planner You will get directly to the webpages of Falk There you have the option to plan a route with the route planner First enter your starting address followed by your destination and then click on Plan route In the top menu bar of the Navi Manager the Transfer tour button is activated after the route has been calculated Select this to transfer the tour to your device An input box will appear into which you can enter a name for your tour This name will then be used as the tour name on the navigation device You can find the tours transferred to the navigation device in the main menu under the menu item Tour planner Select the tour by tapping on it and then choose A You can now travel along the tour that has been compiled Note The routes which are planned here only travel along the road network Falk PANTERA User Manual 51 KOPANTERA Under the Software tab vou are shown software updates which are compatible with vour device In addition vou are shown additional products that allow vou to expand vour device to include particular functions If you click on Buy you are automatically directed to the Falk Online Shop where vou can get further information about the additional products and buv them 14 6 Training
51. hs and dirt tracks Ferries gt uses or avoids routes involving ferry connections Tunnels D uses or avoids routing through tunnels A Fixed rope routes uses or avoids going along via ferrata only in pedestrian mode To avoid one of the options tap on the corresponding symbol Symbols with a red X mean that the corresponding type of route will be avoided Note Avoid does not mean that these types of routes are completely ruled out It is always possible that avoided types of routes will also be used in individual cases Set speed profile dib 441 01 08 AM 10 1 2 Speed profile This function allows you to set your average speed The set Ayerage speed for profile helps to calculate the arrival time and total travel time more exactly Cyclist You can set this setting separately for pedestrian and Bic l ycle bicycle mode You can choose between different speed speed 3 settings in each case Set your desired profile using the 18 22 km h plus minus buttons and confirm it with Pedestrian Pedestri The set speed profile has an impact on the route ie 5 6 km h x Y 2 10 1 3 Ask about route soron Oo If this function is activated the route options are asked about before each route calculation This function is activated as standard If you do not frequently change the route options disable this function Falk PANTERA User Manual 33 KOPANTERA 10 2 Presentation of the map E gt Here you can make various
52. iles from your navigation device please perform the following steps 1 Select the file you want and use the Delete from Flash button in the function bar on the right 2 Confirm the notice with Yes to remove the file Edit GPX files To edit the name or the description of tracks or waypoints proceed as follows 1 Select the element you want and use the button Edit 2 A window will open up in which you can change the name and description as you wish GPX files on the map view In the GPX manager you can display waypoints tracks and geocaches that you have created yourself The map can be moved using the arrows and the hand icon The zoom level of the map can be changed with and Viewing options such as satellite and map are located at the top right hand edge of the map view screen In the bottom section of the GPX manager you can display the altitude and speed profiles length time and description of tracks and wavpoints If no information exists in relation to this the detailed view remains empty at this point If no actually required time exists the anticipated required time is calculated based on the average speeds for cyclists and pedestrians which exist in the navigation device Falk PANTERA User Manual 50 4 PANTERA 14 3 Transfer of content All of the available data is summarised in various categories In the top section of the screen interface the categories Country maps POls My favourite lists Speaker
53. inates This makes sense particularly on open terrain away from roads Coordinates are normally specified with degrees of latitude and longitude Tour Tours are the linking together of waypoints favourite locations or other destinations in a defined sequence However the route between the individual waypoints is not precisely defined as as the case with tracks Track A track is a route which is precisely defined with the aid of coordinates placed close to one another which are connected to form a line This can be displayed on the map so that you can travel along it Tracks can also be recorded with the device In track navigation no turn offs are displayed or sooken announcements issued Falk PANTERA User Manual 63 KOPANTERA Trip computer The trip computer is the ingenious information and statistics hub in vour Falk PANTERA Data relating to the current route but also barometer figures atmospheric pressure altitude as well as astronomical figures sunrise and sunset lunar phase can be called up Wavpoint A waypoint is a geoposition saved as a pair of coordinates geographical latitude and longitude in open terrain A waypoint can be any point in the countrvside e g a branch on a path a hut or any desired POI picturesque point in the countryside viewing point or interesting sight Each waypoint can be selected as a destination Basic Map Plus The Basic Map Plus is an OpenCvcleMap OpenstreetMap prepared specifically for
54. ion To edit a transferred track tap in the detailed view on l The following possibilities are available to vou Reverse track f Changes the direction of travel of the route Edit name l Here you can change the name of the track Delete track Y Deletes the track from the device Falk PANTERA User Manual 45 KOPANTERA 13 Extras 4 Here you find further functions which will be explained to you in the following chapters 13 1 Remember position Le To remember a position so that you can find your way back there at a later date use the Remember position function This saves the current position as a waypoint You then have the option of specifying a name for the location The date and the time is first displayed as the name as standard You can change the name by pressing the back button for a long time and entering another name You save the position with Y If you want to save a point which is not your current location you can do this via the waypoint manager 13 2 Waypoint manager lq Here it is possible to select create and delete wavpoints 13 2 1 Choose wavpoint If you want to navigate to a waypoint tap on Choose waypoint Then specify the search centre you want The waypoints will then be displayed sorted by their distance from this centre Alternatively you can tap on Show all waypoints All waypoints will then be displayed sorted in alphabetical order Once you h
55. ion aid which cannot be a substitute for making a sensible assessment of the situation you are in Please in any event note the particular characteristics of the terrain and the routes you are using Do not follow any routes or suggested routes which would entail a dangerous or illegal form of riding or would place you in a dangerous situation e The road traffic regulations must be complied with at all times for example when cycling and have priority over the routes of the navigation device e Never operate the navigation device while riding and do not allow yourself to be distracted by the device while riding e Please note that United Navigation GmbH does not accept any liability for any damage caused by the device bracket becoming detached from the bicycle e The map data which is used may include inaccurate or incomplete data You should therefore check the calculated route to see if it makes sense and choose your own alternative route if necessary e The navigation device is NOT suitable for use as a vehicle navigation system 1 2 Disposal DISPOSAL OF USED ELECTRICAL AND ELECTRONIC DEVICES TO BE Y APPLIED IN THE COUNTRIES OF THE EUROPEAN UNION AND OTHER EUROPEAN COUNTRIES WITH A SEPARATE COLLECTION SYSTEM FOR mu THESE DEVICES The symbol on the product or its packaging indicates that this product cannot be treated as normal household waste but must instead be handed in at a collection point for recycling electrical and electronic de
56. laimer UNITED NAVIGATION GMBH AND ITS LICENSORS INCLUDING THEIR LICENSORS AND SUPPLIERS EXCLUDE ANY EXPLICIT OR IMPLICIT WARRANTY IN RESPECT OF QUALITY PERFORMANCE MARKETABILITY SERVICE FOR A PARTICULAR PURPOSE OR EXEMPTION FROM PROPERTY RIGHT VIOLATIONS Liability disclaimer UNITED NAVIGATION GMBH AND ITS LICENSORS INCLUDING THEIR LICENSORS AND SUPPLIERS SHALL NOT BE LIABLE IN RESPECT OF ANY DEMAND CLAIM OR ACTION REGARDLESS OF THE NATURE OF THE DIRECT OR INDIRECT LOSS HARM OR DAMAGE ASSERTED IN THE DEMAND CLAIM OR ACTION WHICH CAN ARISE AS A RESULT OF THE USE OR POSSESSION OF INFORMATION OR FOR ANY LOSS OF PROFIT INCOME ORDERS OR SAVINGS OR FOR ANY OTHER DIRECT INDIRECT ACCIDENTAL PARTICULAR OR CONSEQUENTIAL DAMAGE WHICH ARISES AS A RESULT OF THE USE OR UNSUITABILITY FOR USE OF THIS INFORMATION FOR ANY DEFECT IN THE INFORMATION OR FOR BREACHES OF THESE GENERAL TERMS AND CONDITIONS EITHER BY AN ACTION IN HARMONY OR IN CONTRAST OR ON THE BASIS OF A WARRANTY EVEN IF UNITED NAVIGATION GMBH AND ITS LICENSORS HAVE BEEN NOTIFIED ABOUT THE POSSIBILITY OF SUCH DAMAGE Responsibility disclaimer References to other products services processes hypertext links to third parties or other data through the use of trade names trademarks names of manufacturers and suppliers or other parties shall not necessarily constitute or imply any endorsement support or recommendation by United Navigation GmbH or its licensors Product and service in
57. lfingen gpx RR H lben Gomadingen Holzelfingen 15 05 2013 240 KB PC gt Flash i RR H lben Gomadingen Holzelfingen on GPSies com Track a l Q y P k 4 yY k x wa va U e 4 A 4 if Bempflingen isa Cy si v f A Mi ee F Cow S PS A y 7 a al P l Grafenberg gt Ti L a fr Pliezhausen n 7 e T AS y TN PC gt SDcard y Auch sB e NIF pe nit J Neu tencion Y Drackensten d 7 A enti 3 td l Tg l SAA He CAN ey otanischer E ae Garten Fa a i e ku 4 A Se 5 _ Metzinge AS Se y g z Kirchentellinsfurt LA A en ati iy So J Af ne gt LA fi pa rom bal Fa nterjesingen ae a rema y af gt 4 Pe IX y NO LN Wannweil rater il PS j j Westerheim f aimen E Reutlingen L A p ep Hirschau IN CA OY c KV dl Ro stil i 2 A A 2 il 4 4 ach 1 merstein _ br A A xa AA N L NED P l Laichingen Delete A ys a Ening is e 2 INE Y a from SD card ee fr f l T ja A IA A Sen tr s E auberg ck iD ok Z SO IE 2 oa y L y ullingen j k 1 Y T d p Ae ee y 137 i H A A Le ys Le AY tu A y4 E j Y y gt Delete e iL Gomaringen AN l f St Johann p ac j 2 l l i N sr 5 f j AN E Heroldstatt from PC we W Ohnastetter ii b A Pr Soe Ghl 4 af 2 is Moo Ta Se Buhl P See ari f r A R Nehren f gee Y Sng r l mio fa 4 kal 4 l 9y K rt a Ofterdingen Einwinkel AN PN A DN
58. m Google Earth You will also find lots of interesting POIs on Google Earth The following section describes how you can incorporate several POIs as a new POI category Note Falk has no influence over functions of Google Earth which are described in the instructions There may therefore be changes to the sequence which is described Start the program Google Earth Enter a city and a subject theme in the search box at the top left e g Stuttgart and Museums Selection of the POIs which are to be adopted You can adopt blocks of POIs by using the umbrella term e g Museums 1 10 by clicking on the right mouse button and then selecting the menu item Save under My Places You can adopt individual POls by clicking on the right mouse button and then selecting the menu item Save under My Places The selected POls are displayed under My Places Further POls including those from other cities can now also be added to My Places in the manner described above Click on the My Places item with the right mouse button and select the menu item Save As The file can now be saved on the PC as a KMZ file Falk PANTERA User Manual 55 4 PANTERA KML KMZ import in the Falk Navi Manager Falk KML Import Manager step 2 6 The following text describes how KML and KMZ files can be imported to the sat nav via gt Select a KML file the Falk Navi Manager Select a KML file which you would like to convert to the Falk POI
59. main in the possession of and be kept safe by the Licensee Falk PANTERA User Manual 65 KOPANTERA Transferring 1 2 4 The Licensee is prohibited from hiring out the software data and or the accompanying material to third parties as part of commercial activities The Licensee is prohibited from making the software data and or the accompanying material accessible to third parties as part of commercial or non commercial activities circulating it and or passing it on to the public However the Licensee shall be entitled to transfer the original data carriers including the software data and the accompanying material if it has deleted the installed software and all possible pools of data which may have been saved and any back up copies which may have been made the third party pledges in writing to the Licensors directly that it will abide by these licence terms and conditions this written declaration of consent is sent to the Licensor and the Licensee has handed over the software data and the accompanying material in full to the recipient without retaining any copies whatsoever Warranty 1 The Licensee must report obvious defects within an appropriate set period of time and in writing with a precise description of the defect Defects must be reported at the option of the Licensee exclusively to one of the Licensors mentioned above Reports of obvious defects which are delayed or unsubstantiated shall release
60. mpare the altitude profiles for all alternatives if you tap on Altitude profile E A Ascent Dist from start m m Falk PANTERA User Manual The altitude profiles are marked in the same colour as the route in each case The route is plotted on the x axis in km or in miles On the y axis the geographical altitude is plotted in m or in feet The scale can be altered using the plus and minus buttons You can switch between the altitude profiles using the arrows at the bottom Tip Zoom in closer to identify more details in the altitude profile If you tap twice on a point on the graph this point is zoomed in on When you click on a point on the graph it is marked and the distance from the starting point is displayed By clicking on one of the info boxes different values which are to be displayed there can be selected 23 KOPANTERA In the Training historv vou find vour recorded training units Vou can record the route that vou are riding or walking along This recording will help vou to be able to retrace the route vou have ridden or walked preciselv at a later date After it has been recorded the route can be displaved on the map under training historv and the altitude profile can be viewed Further information such as the starting and end position distance and the height gain or loss can then likewise be displaved 7 Training historv To start a recording press the Start Stop button on the outside of t
61. mply click on the Show details button Falk PANTERA User Manual 52 KOPANTERA Training unit view Detailed information The left side will show all available details concerning the training unit that is being recorded and that you selected If no values are shown this unit has not been recorded This may occur with transferred tracks for example Map view 1 The map view has the following features available 2 View of the training unit being recorded in the form of a line on the map view 3 You can move the map with the arrows or with the hand icon 4 You can change the level of zoom with and 5 View options such as Satellite and Street map are found on the upper right edge of the map view When you click on a waypoint a layer with details concerning the waypoint will be displayed P Profile display The following profiles are available on the lower pane in the Details view Speed profile Elevation profile Heart rate profile Cadence profile e 14 6 2 Training Statistics Your device carries out statistical analyses of the training units being recorded This will provide you for example with an overview of the number of training units total distance duration calories consumed and the number of climbs and descents during a specific period of time Total statistics e Total kilometers In contrast to your actual training statistics your total statistics not only total the values of the trai
62. n Select a POI icon on the map about which you would like to dib 4101 00 AM E Tennisplatz e know more information ATA If you tap on the name of the POI you will be shown the hringstr _ detailed view for this POI An Actions button appears below the name ohh CEF Tap on this The actions mentioned above are now available to you Tap on Close in the info box or on the red arrow at the bottom edge of the screen to switch back to the map view ma EN EE z A hi ae im ImEfe Beem 7 a 0 E ATETA Falk PANTERA User Manual 15 SOPANTERA 4 2 Trip computer ath 01 41 AM To the right of the map view is the trip computer which Speed current shows you lots of measured values lt has a second page which you can call up by swiping up or down on the screen 33 1 You can configure the values in the trip computer yourself u km h by tapping on a field and then choosing from the list which i a Heart rate curr Cadence curr value should be displayed in this field bpm rpm Sp YH w o stops Dist to dest 36 9 9 3 km h Current destination Wilhelm Raabe Strahe D 70199 Stuttgart Tip You get the average values such as average speed by recording a training unit 4 3 Manoeuvre view To the left of the map view is the manoeuvre screen with the altitude profile It displays the next manoeuvre to you in the middle As on the map here too there are co
63. nbarten Hinweistext ablehnen so sind der zustandige Beamte die Bundesagentur oder die sonstigen jeweiligen Bundesbeamten bevor Sie weitere oder alternative Rechte an den Daten einfordern verpflichtet NAVTEQ daruber in Kenntnis zu setzen Provisions for end customers The data data is provided exclusivelv for internal use bv the end customer and not for onward sale lt is protected bv copvright and is the subject of the following General Terms and Conditions which were agreed to firstly by the end customer and secondly by United GmbH and its licensors Falk PANTERA User Manual 69 KOPANTERA 20102 LOGIBALL GmbH NAVTEQ NV surveying agencies of the states and the German Federal Agency for Cartography and Geodesv map of Germany KOMPASS Karten GmbH Austria and Italy All rights reserved GENERAL TERMS AND CONDITIONS For internal use only You agree to utilise this data together with a navigation solution from United Navigation GmbH only for internal corporate administrative non commercial purposes for which you have received the licence but not for a service company for timesharing or for other similar purposes Accordingly but subject to the restrictions that are outlined in the following paragraphs you may copy this data if it is necessary for your internal use i to view it and ii to save it provided that you do not delete any copyright notice which appears and you do not alter the data in any way You agree not to reproduc
64. nfigurable displays of route information or training figures at the top edge of the screen lf on the manoeuvre screen you swipe further to the left you return to the trip computer and vice versa Via the la button vou can view the altitude protile in detail Falk PANTERA User Manual 16 KOPANTERA 5 Main menu The main menu gives you access to the different functions on your device which are explained one after the other in the following chapters To switch from the map view to the DE main menu tap on MA To then return to the map view tap on A a 6 Destination entrv On the destination entrv screen vou have the option of entering anv destination vou want in order to be navigated to it Various possibilities for doing this are available to vou and thev are explained one after the other below 6 1 address Oo Here you can navigate to a destination by entering an address You can enter a full address with the street and street number Enter Destination dina 01 00 AM Note With the basemap it is not always possible to enter a A street number Address To enter an address carry out the following steps First tap in the main menu on Destination entry and then on Address You can now enter the city name first or enter a postcode by tapping on Point of Previous Note With the basemap it is not possible to enter a Interest destination postcode Tap on Pad to enter the street and street
65. ning units being recorded Instead they show the grand total of kilometers you ve ridden Values that you enter manually into the device will also be added to this total e Elevation gain In contrast to your training unit statistics your total statistics not only total the values of the training units being recorded Instead they show the grand elevation gain total Values that you enter manually into the device will also be added to this total Training statistics Your training statistics will only include the training units that have been recorded with your device You can use the filters to filter these training units by bicycle profile or by year If you do this the statistics will only take into account the training units that meet the filter conditions You can use the Week Month and Year buttons to select the period for which you want a report Training units that have been recorded with your device will be statistically Falk PANTERA User Manual 53 KOPANTERA analvzed This wav vou can get for example an overview of the number of training units total distance duration calories consumed and the number of climbs and descents during a specific period of time 14 6 3 Save Training Units In order to be able to analvze vour recorded training units and transferred tracks vou will have to save them once on vour computer Whenever new training units that have not vet been saved on vour computer are detected on vour
66. nly ever calibrate the compass outdoors Make sure when calibrating it that no metallic objects are located in the vicinity of the device and that no magnetic or electro magnetic sources of disturbance e g high voltage power lines antennae are present Falk PANTERA User Manual 40 KOPANTERA 10 4 6 Calibrate barometer To optimise the accuracv of the height measurement vou should calibrate the barometer at regular intervals JE You can calibrate the barometer in three ways Automatic the barometer is then calibrated completely automatically However to obtain more accurate results it is Automatic Manual by Calbrate barometer diniE lO1 09 AM recommended that you calibrate it manually elevation Manual by specifying height if you know the height of your current position enter this and place the device down p to rest on a flat surface for a short time To standard atmospheric pressure then the standard atmospheric pressure at sea level is used to determine the To standard height air pressure Note The barometer should be calibrated after each change of battery In changeable weather and where there x pe are large differences in height it is recommended that you calibrate the barometer several times a day 10 4 7 Set position format e CANE aa There are different formats for specifying coordinates To support the entrv of the most common formats here vou can dd ddddde select the format you want re
67. nsor indicating possible ways of preventing the effects of the defect A new version of the program must be accepted by the customer if this results in an acceptable level of adjustment for it If the subsequent service provided fails to work if the Licensor is late in providing it refuses to do so or if the subsequent service is unacceptable to the Licensee in an individual instance the Licensee shall be entitled at its option to withdraw from the contract or to demand a reduction in price Claims for compensation are governed by 5 If exceptionally the Licensor has promised or demonstrated characteristic features of the software the data the accompanying material or the data carriers expressly or in demonstrating the characteristic feature in its own advertising or has fraudulently failed to disclose defects in these items paragraphs 2 and 4 above shall not apply In this case 5 paragraph 1 a shall apply accordingly A warranty on the part of the Licensor shall not exist in cases of functional impairments which result from the hardware and software environment provided by the Licensee incorrect operation incorrect improper commissioning use and or treatment of the subject of the contract by the Licensee external defective data or other reasons which Falk PANTERA User Manual 66 S5 KOPANTERA stem from the Licensee s area of risk as well as from improper maintenance alterations and or inappropriate repairs made by the Licens
68. nuous text up and down directly with your finger In menus with several pages you can scroll to the next page by swiping your finger sideways Route options With the route option Easy the route may be longer as gradients of over 4 are avoided The avoidance of certain types of routes tunnels hiking trails etc also has an influence on the route which is calculated After the route has been calculated you can change the route options again if you tap on ia This allows you to compare what difference these settings make Map zooming Zooming in and out of the map helps in many situations If you want to move the map a large amount first zoom out You can then move the map over greater distances more quickly Zoom in on the map e g in the view of the calculated route to identify more details Save power You can save power and thus increase the operating life if you switch the device to stand by mode when you are not actually using it In addition you can set the brightness of the screen to a relatively low level to save power Falk PANTERA User Manual 58 KOPANTERA 16 Troubleshooting Navigation device does not start up No GPS reception GPS reception is interrupted Device no longer responds to entries Compass does not align itself correctly Barometer values are not correct The destination you are searching for cannot be entered The track includes jumps in altitude Falk PANTERA User Manual
69. o d a l d tv a 43 TU ACUVO NOUS i i e iiaea 44 12 Transferred 1FACKS isa NA A O 45 13 EA G i A A 46 13 1 Remember DOS MOM 5 is vi si eee ae 46 13 2 MVAY OMIT NAIA Srta cit 46 13 2 1 SIO OSS WAY DOIN 6 iiecetsatsctct oe aa A 46 13 2 2 Greate Wa OO IMU i i ii i ta a 46 13 2 3 Delete created waypoints dis 47 13 3 GP X man A at 47 13 4 pe EE A AT EN 47 TE Falk NAV IRI AINA CM i ii ia 48 14 1 Introduction to the Falk Navi Manager ccccccsseeeeeeeceeeseceeeeeeeeeeeeseeeeeceeeeseaeeeeeessaseeees 48 14 2 IMPOFLOFGRX MNES st A 48 14 3 Trastero Conten iii a TA i 51 14 4 Compiling your own tour on the PC oocccccnncccccccccnnnccccccnonnccnnnnnnonnnnnncnnnnnnnnonanennnnnononenanennnns 51 14 5 A A E CE e A 52 14 6 Tamma Manada aia 52 14 6 1 Taning Didi 52 14 6 2 TANINO OIS UCS ssena i a 53 14 6 3 Save Training UNIS iii i dak a 54 14 6 4 Transtered TWACKS i iii de betes 54 14 7 importot PO Srita 55 14 8 Falk Online Community 123POl COM oooooncccnnncccccccnonncnnnononononncnnnnnnnononanncnnnnncnnonanenennnonoss 57 14 8 1 Use Favourite lists from the COMMUNITY ccccccccccccnnccnnnccncconnccnnnnnononononncnnnnnonenanennnns 57 14 8 2 Upload new and amended ratingS cccccocncnncccconnconcnononcnonononancnnnonnnncnnnnnnnnncnnnnnnnns 57 19 TIPS ANO CS A G aaa 58 16 FrOUDIESMOOUING cai aa 59 17 Technical data i i oaccanOa 60 19 Change of DATION cai Saa 61 19 Serv ICO S SUBDO Rustic
70. o display the city names on the basic map to allow better orientation If you then subsequently go on to purchase more maps you can deactivate the labelling on the basic map here 10 2 6 Auto zoom When auto zoom is activated the scale of the map is adjusted on the basis of your speed at high speed the map zooms out If you switch off the auto zoom you can set the scale of the map on the map view screen yourself This is then retained 10 2 7 Points of interest on map 5 Here you can choose which points of interest should be displayed with small symbols on the map To do this select the categories you want All points of interest in the chosen categories will then be displayed on the map Falk PANTERA User Manual 34 4 PANTERA 10 2 8 Track recording JA Ge For the recording of a training unit you can set here whether the route covered should be shown on the map view Note This setting only relates to the map view during recording With a saved track the route covered can always be displayed on the map at a later date 10 2 9 Set map colours e Here vou can select from various map colours which colour appeals to vou more Using the arrows at the bottom you can switch back and forth between the different colour options available Select vour colour options and confirm vour selection with Y Falk PANTERA User Manual 35 KOPANTERA E 10 3 Profiles Sensors 0 Here you will find all settings which
71. oduct or its parts inappropriate installation use of software added by the customer viruses causes outside of the scope of the intended uses which are envisaged accidents fire lightning power cuts and or natural disasters as well as similar causes This guarantee shall further lapse in the event of any attempted or completed alteration or repair to the product by unauthorised people removal or alteration of the device s serial number Falk PANTERA User Manual 62 KOPANTERA 20 Glossarv Barometer A barometer is a measuring device used to measure atmospheric pressure The barometer is used to calculate the current height and is shown on the trip computer Menu button The menu button is the lower button on the left hand side of the device When you press the menu button you can control the volume and brightness levels However you can also select another function which is to be controlled using the menu button Button Buttons which are shown on the screen These many be menu items or command buttons A X etc Buttons can be operated bv tapping on them GPS The Global Positioning Svstem is a satellite based svstem for global positioning Vour location can be pinpointed using the conventional GPS satellite svstem to within 20 metres at any time provided that a GPS signal is being received GPX file The most common file format for saving tracks or wavpoints is the GPX format The files are saved in the GPX manager However the
72. or as well as the status Vou can use the Search for sensor button here to search again for a sensor Tip If it is not possible to establish a connection to the heart rate sensor moisten the sensor contact area on the back of the chest strap again Speed sensor Once you have coupled up a speed sensor here you see the ID of the sensor as well as the status You can use the Search for sensor button here to search again for a sensor Cadence sensor Once you have coupled up a cadence sensor here you see the ID of the sensor as well as the status You can use the Search for sensor button here to search again for a sensor Tip If it is not possible to establish a connection to the combined sensor check the gap between the sensors and magnets You can display the measured values of the sensors at any time e g in the info fields of the map view Falk PANTERA User Manual 39 KOPANTERA 10 4 Svstem General ki Here vou can make various settings which affect the device To do this click on the menu on Settings gt System General The following options can be changed dif 10 4 1 Batterv 7 The battery option allows you to check the remaining capacity of the batteries When connected to a power source Charging is displayed here 10 4 2 GPS Info GPS Info indicates the GPS reception signal strength at the current location Adequate GPS reception is essential for any navigation An info page with information about the e
73. ormation also depend on whether sensors were o connected Wheel type Mountain bike Map displays the track on the map You can zoom in and ci ale out and move the map If you click on Position you can jir want Ji i show or hide vour current position on the map ca mm Altitude profile displays the altitude profile for the unit PEN starts the track navigation gal 31 1kmjh va Y If you want to edit the training unit further tap on see Chap 4 2 Falk PANTERA User Manual 24 KOPANTERA To edit a training unit tap in the detailed view see Chap 7 2 on 7 2 Edit training unit The following options are availble to you Reverse training unit Switches the direction of travel This also allows you to find your way back to the starting point of a training Edit name Here you can change the name of the training unit Delete training unit Y Deletes the training unit from the device 7 3 Start training unit When you start a track you have the possibility of deciding whether you want to start the track directly or would like to convert the track into a route in order to obtain turn off instructions 7 3 1 Convert track to route Start track dip aoi 0E AM The Convert track to route function calculates a route which is as similar as possible to the original training unit In addition in contrast to standard track navigation you then l get instructions via beeps which guide you with
74. ported a GPX file again You can display your waypoints tracks and geocaches on the map Altitude and speed profiles and the time required for the tracks can be called up Transfer and save GPX files to the PC To save imported GPX files and GPX files you have created yourself to the computer proceed as follows 1 Select the file you want and use the Save button 2 Once you have acknowledged the notice about the intended storage location with OK two entries will appear in your list There is an entry for the GPX file on your navigation device and an entry for the GPX file on your computer 3 To find the file you want again on your PC mark the file and by clicking the right mouse button call up the menu item Show folder The folder in which the GPX file has been saved is automatically opened Falk PANTERA User Manual 49 KOPANTERA Import GPX files from vour PC to the navigation device To import downloaded GPX files to vour navigation device please perform the following steps 1 Select the button Import 2 Search for the file you want on your PC select it and use the button Open 3 The file has now been imported to the GPX manager and can now be saved on the navigation device 4 Mark the file you want and choose Copy PC gt Flash in the bar on the right The GPX file is now saved on your navigation device and can be used Delete GPX files from the navigation device To delete recorded or imported GPX f
75. rcuit Select saved tour Falk PANTERA User Manual ie KOPANTERA 9 3 Select saved tour If you have already created tours you can call up a tour via Select saved tour First select whether the tours should be displayed sorted around your current location or an address Or you can simply have all tours displayed They are then listed in alphabetical order Select the tour you want from the list and tap on Y The detailed view of the tour is then displayed Via l you can change the settings for the tour If you tap on you start the routing You can select whether the route calculation should start from your current position or the first station Falk PANTERA User Manual 30 KOPANTERA 9 3 1 Detailed view of a tour Vou will find all of the information vou need about a tour in the detailed view First select a tour and tap on Raditour aa You Can switch between three views using the tabs at the top Map Stations Info Shows the starting point and destination point as well as the route length and the number of stops EX Raditour Map Shows the tour on the map Stations Displavs a list of the individual stations re EF eee ta o 16 km g al In the station list vou can also deselect certain destinations on the tour if vou do not want to navigate to them To do this tap at the end of the line for the station on M IX means that the station will be ignored means that the station will be navigated to W me
76. ronic or computer devices including without limitation cellular phones palmtop and handheld computers pagers and personal digital assistants or PDAs Warning The Data may contain inaccurate or incomplete information due to the passage of time changing circumstances sources used and the nature of collecting comprehensive geographic data any of which may lead to incorrect results No Warranty This Data is provided to you as is and you agree to use it at your own risk United Navigation GmbH and its licensors and their licensors and suppliers make no guarantees representations or warranties of any kind express or implied arising by law or otherwise including but not limited to content quality accuracy completeness effectiveness reliability fitness for a particular purpose usefulness use or results to be obtained from this Data or that the Data or server will be uninterrupted or error free Disclaimer of Warranty UNITED NAVIGATION GMBH AND ITS LICENSORS INCLUDING THEIR LICENSORS AND SUPPLIERS DISCLAIM ANY WARRANTIES EXPRESS OR IMPLIED OF QUALITY PERFORMANCE MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT Some States Territories and Countries do not allow certain warranty exclusions so to that extent the above exclusion may not apply to you Falk PANTERA User Manual 68 KOPANTERA Disclaimer of Liability UNITED NAVIGATION GMBH AND ITS LICENSORS INCLUDING THEIR LICENSORS AND SUPPLIER
77. s Software and Raster maps optional are presented in the form of tabs When you click on the tab you have selected all of the data in this category is presented in list form in the overview Thanks to row headings and corresponding icons you can tell from the overview where the individual data for the various categories is saved The data may be stored in the internal memory of the navigation device on the SD card on the PC Fall al 42 on CD DVD or Don an internet server Important An active internet connection must exist to enable downloading from the internet Copying or deleting The selected data is copied from the PC to the SD card Edhe selected data is copied from the PC to the internal memory of your device The selected data is deleted from the internal memory rro selected data is deleted from the SD card The selected data is deleted from your PC Please note that the memory capacity of the internal memory is limited The capacity utilisation of the internal memory is displayed on the bar at the bottom of the screen 14 4 Compiling your own tour on the PC The Falk Navi Manager offers the possibility via the online route planner from Falk of planning your journeys from the comfort of your own PC You have the option of transferring the tours planned in this way to the device and navigating with them there Vital prerequisities for using this function are an active internet connection and connection of t
78. s no more than 5 mm Please be aware that the S sensor may only be fitted to the frame facing downwards in order to avoid any damage to the spokes Spoke Move Magnet S Sensor 5 mm You must secure the magnet for the cadence sensor C sensor to the pedal crank using the cable tie so that it runs past the sensor when you move the pedal crank arm Magnet Falk PANTERA User Manual 10 SOPANTERA Make sure that the cadence sensor C sensor and the magnet are no more than 5 mm apart Move the sensor on the frame so that the gap is no more than 5 mm Move C Sensor The sensors are attached to the frame pointing downwards The magnet for the speed sensor is attached to a spoke so that it runs past the S sensor with a gap of no more than 5 mm when the wheel rotates The magnet for the cadence sensor is attached to the pedal crank so that it runs past the C sensor with a gap of no more than 5 mm when the crank is pedalled You can find out how to couple the sensors to the device in Chapter 3 3 Falk PANTERA User Manual 11 4 PANTERA 3 6 Heart rate sensor optional The heart rate sensor is worn on a chest strap against the body and transmits the current pulse to the device wirelessly AD ouTROOR Attach the sensor to the chest strap using the press studs To use the chest strap you should moisten the sensor contact area on the back of the chest strap slightly and then adjust the strap so that i
79. settings which affect the map view To do this click in the menu on Settings gt Presentation of the map The following options can be changed ESA 10 2 1 Map perspective E With the map perspective you can switch between the two dimensional and three dimensional representation of the map The respective setting is indicated by the symbol and the text 2D or 3D ees LIL E y 10 2 2 Raster maps optional Ve l With the raster maps vou can view landscapes and cities from a bird s eve perspective via topographic maps The raster map thus makes it easv for vou to get vour bearings Requirement You have activated the 2D map view and installed raster maps 10 2 3 In direction of movement Ek map orientated north s The map can be orientated either in the direction of movement or always to the north Note If you select In direction of movement the positional arrow always points upwards This setting facilitates orientation If you select Map orientated north the positional arrow is located in the middle of the map and rotates according to the direction of movement 10 2 4 Position on street EE fix Here vou can stipulate whether vour current position should be mapped onto the route network Note For geocaching and for navigation on open terrain it is essential that vou switch off this function 10 2 5 Citv names on basic map if E If you do not have maps for a continent or country this function still allows you t
80. t they always appear at the ie Y ae beginning of the list Falk PANTERA User Manual 18 KOPANTERA 6 3 1 Detailed view of a POI Places of interest din a 01 02 AM Info Map Picture Opt In the detailed view you will find all of the available information about a POI At the top you can switch between the Info Map Picture Ha optional and Options screens by tapping on the tabs IN Info shows vou the address the distance and a descriptive Fernsehturm text Mu ratin llo mili ello ler ol i rating 0 lle sie sir ihe Jahmstrabe 120 Map shows you the POI on the map view 70597 Stuttgart After a spectacular and dizzyingly Via Picture you can view a picture of the selected POI if expensive refurbishment in 2005 one exists Stuttgart s landmark once again MAI 9 Y In the Options you also have the following possibilities A a Search for POI around POI Searches for another POI Info Map Picture Opt around the current one if for example you would like to find a restaurant near to the hostel where vou are staving Search for POI around o IMMA POI Enter rating Possibilitv of rating the POI The rating is then POS OU tice ein eaten senate displayed at the top in the detailed view Save POI as waypoint Adds the POI to your own waypoints ea You can use the two arrows at the bottom to scroll to the next or previous POI from the list starts the route calculation to this POI de MA gt Y d switches back to t
81. t fits you comfortably The strap should rest on your body below the chest area You can find out how to couple the heart rate sensor to the device in Chapter 3 6 Falk PANTERA User Manual 12 SOPANTERA 4 Main Screens 4 1 Navigation view Bike profile Active sensors TJ Distance to destination GPS Signal VA ES Battery Next manoeuvre Current speed Next but one manoeuvre 48 7 Compass Distance to next manoeuvre Map Current position Zoom Button Main menu Distance to destination shows how far away your destination still is You can choose what information you want to be displayed here In the same way you can edit the Current speed box Profile shows which profile you are currently using Active sensors The symbols tell you which sensors are currently coupled up The symbols are white when an active connection exists and grey when no connection currently exist Heart rate sensor Speed sensor ji Cadence sensor Recording When recording of a training session or timed route is taking place a corresponding symbol is displayed e recording of a training session taking place Y recording of a timed route taking place Tip If no connection exists with the heart rate sensor moisten the sensor contact area on the back of the chest strap again If there is no connection with the combined sensor check the gap between the sensors and magnets Falk PANTERA User Manual 13 KOPANTERA
82. tala aummGueie 32 10 1 1 FIOULSZODUOINS air N ari 32 10 1 2 Speed prollle estilo seeds sets ato A cas 33 10 1 3 PSK ADOUL FOUTS ODOM s sit ba aa unless allas elo dedicas 33 10 2 Presentator orhe A A e 34 10 2 1 Map OCISDCCUVE vto 34 10 2 2 Mas len maps OPONA usina al tilda 34 10 2 3 In direction of movement map orientated north occccoccncccnoccncocnncnncnnnoncnnanenonnnnoos 34 10 2 4 P OSIHOM On Melinda 34 10 2 5 City names On Dase MaD acid a 34 10 2 6 A 34 10 2 7 POMISOMINErEStO MAD rasca cid 34 10 2 8 Track 21610 fe Ja Ta oari ea a a a a e a a a 35 10 2 9 Set Map eto o 10 L I 35 10 3 Frolles 7 SONSOLS ins 36 10 3 1 Edit user profile ora aa daa dica 36 10 3 2 Change bike profile ooococccococcnncccconcnonononannonncnonancnnnononnnnnnnnnnnncnnnnnnnnnnnnnnnnanens 36 10 3 3 o a tata 36 10 3 4 Map DIOR A ee errr 37 10 3 5 FINES SENSO Sa a ae 38 10 4 System General ties 40 10 4 1 BANOV aa ta tt seats sateen eae a cane aes 40 10 4 2 GP SN Os a ja ge eee os ence ae se Stan eee eee 40 10 4 3 A A cpoa tennant 40 10 4 4 ES SP cane anda att A ii e da ea 40 10 4 5 Calibrate COMPASS et ii a e anal i 40 10 4 6 Calibrate DAFO Meter xx i ia cath ta 41 10 4 7 Sel POMO TOMA lina 41 10 4 8 Screen a OO ii cada 41 10 4 9 A 42 TOAT Drau Seting aci A A G A aa 42 A NE eaa A ta 42 104 12 Language aria a aida 42 MOEA SS BOCES Bl a asa 42 POA AG ITO A l i ea 43 104 15 Arange menu siren ik kariki tet
83. talled Please use the Navi Manager for any possible installation that may be required It is recommended that you calibrate the barometer manually by entering an altitude in particular before recording a track 99 KOPANTERA 17 Technical data Screen Displav 7 1 cm diagonal 3 transflective Resolution 240 x 320 pixels ca 6 2 x 10 8 x 1 7 cm Internal memory 8 GB RAM memory 128 MB GPS Sensors Barometer compass Input output Screen interface on screen keypad Integrated 1840 mAh Ll lon battery Battery rechargeable Waterproof rating IPX 4 Environmental conditions Operating temperature 10 60 C Storage 20 70C Atmospheric humidity 0 90 atmospheric humidity Falk PANTERA User Manual 60 SOPANTERA 18 Change of battery Sensors To change the battery of the sensors you must untwist the battery cover on the back to the left You can do this for example using a coin which you place into the slot on the cover Insert the battery note the correct polarity and close the sensor by twisting the cover to the right to shut it Device 0 5 To replace the battery of the device in the event of a defect you must pull out the four rubber nipples 1 on the back of the device Then undo the screws 2 with a suitable precision screwdriver Then carefully open the housing cover 3 and carefully remove the battery 4 Detach the connector of the battery from the
84. terial in this context is taken to mean the program description and the instructions for use An acquisition of rights to the software which goes beyond this is not associated with this granting of usage rights The Licensor shall retain in particular all of the distribution exhibition presentation performance and publication rights to the software The same applies to the editing and reproduction rights unless anything to the contrary is expressly agreed below Scope of the usage rights 1 The granting of the licence entitles the Licensee to install and run the software and to use the data at one workstation stand alone application Furthermore the Licensee may use the installation program provided by the software to install the software on a portable Windows CE device stand alone application which is sold by the Licensor Use of the software and the data on a network or a system comprising multiple workstations shall only be permitted if the Licensee has purchased a special licence for every workstation at which the software and data may be used The software and data may not be used by employing remote data transmission The granting of the licence only permits private use of the software commercial use is prohibited The usage right is confined to the object code of the software program The Licensee has no entitlement to a copy of the source code The Licensee is prohibited unless it is for the purpose of establishing interoper
85. th means lt 0 ES north of the equator Now enter the coordinates If you tap on you can enter the degree of longitude To do this tap on E for east east means east of the ta gt prime meridian If you click on the coordinates of the current position are entered Note As Central Europe is situated north of the equator and east of the zero meridian you will always use the north east combination when entering coordinates in this format If after entering the degree of longitude you tap on o gt it is if possible specified which address is located close to the coordinates Tap on to display the point on the map or on WV to start routing to this location 6 8 Arrange menu Here you can change the order of the functions as you wish within the destination entry screen Select a function and move it to the place you want with the aid of the rectangular arrows Do not worry no function will be lost And even if the functions become mixed up you can tap on to restore them to the preset order Falk PANTERA User Manual 21 KOPANTERA Once you have entered a destination the route options are then enquired about If a route has then been calculated you have the option of calling up different information about the route or calculating alternative routes a calculates two alternative routes see 3 13 1 Calculated rc pa 01 04 AM a ttgart jiu uerbach T ji xf Fellbi d y ha ais ee gt TAT
86. the Licensor from its obligations to provide a service to correct the defects However in the event that the Licensor becomes involved with unsubstantiated reports of defects which are raised through gross negligence or deliberately it shall be entitled to invoice the Licensee for the costs associated with this In the event that the Licensee is a trader it must above and beyond its obligation arising from sentence 1 examine the items delivered and services provided by the Licensors immediately and report any defects which are found immediately in writing and with as precise a description of the defect as possible The Licensor guarantees that the program functions can be executed without any errors in accordance with the program specifications and contract documents Errors which only result in a negligible reduction in the usability of the software shall not entitle the Licensee to reduce the amount paid for the granting of the usage rights to the object of the contract or to withdraw from the contract Outside of the claims under the warranty the Licensee has no claim against the Licensor for updates to the software and or data The Licensor shall fulfil its warranty obligations in the event of material defects by providing a subsequent service specifically at its option by correcting the defect or supplying a replacement product A subsequent service may be performed in particular by a new version of the program being handed over or by the Lice
87. tings On the sat nav in the detailed view for a point of interest POI you can submit a rating of from 1 to 5 stars This means for example that you can rate a restaurant you have visited You can upload these ratings in the Falk Online Community where they are combined to produce an overall rating To do this you must click in the menu under Edit on Transfer new and amended ratings to the Falk Community If the automatic update function is set appropriatelv uploading of the new and amended ratings will be performed automatically each time that you start the Navi Manager Falk PANTERA User Manual 57 KOPANTERA 15 Tips and tricks Here vou will find a number of tips and tricks that will help vou to handle the device cm ECs os 0 These buttons allow you in many contexts to switch between the input view and the list view In the list view you will see all of the entries which match your previous input This means you can find what you are looking for even faster Back to map Wherever you are on the menu you can easily switch back to the map view at any time To do this press down on x or Help On any screen on which you see the O symbol you can tap on it and you will be guided directly to the Help chapter which relates to the corresponding theme This ensures that you can find an explanation of the particular function in many different contexts Scrolling and browsing In list views you can move the conti
88. trv these maps contain a huge range of cvcle paths footpaths hiking trails and forest trails In some cases this outdoor route network which is fullv integrated into the map is just as extensive as the road network for the countrv in question All maps undergo extensive quality testing before they are used on the navigation devices Outdoor maps from Falk therefore know almost all routes to the destination on foot or by bike They are also fully routable Starting from your chosen location a suitable route to your destination is therefore automatically determined which is then output with the aid of acoustic and visual commands The presentation of the map remains sharp and clear on every zoom level Falk PANTERA User Manual 64 KOPANTERA 21 Licence terms and conditions Licence terms and conditions for the Falk Navigator and Navi Manager 1 Object of the contract 1 2 The Licensor is United Navigation GmbH Marco Polo Zentrum 73760 Ostfildern hereinafter referred to as the Licensor In accordance with 6 the Licensor grants the Licensee for the duration of the contract a single non exclusive right which is restricted in accordance with the terms and conditions below to use the enclosed software program which is stored on a data carrier in machine readable form object code hereinafter referred to as the software including the data which is contained and the accompanying material Accompanying ma
89. turn off Convert track to route to instructions In addition you are shown the arrival time and obtain turn off instructions the real distance Note If road segments do not exist in the map material or sections of road are avoided by the route options which are O Start track guidance set the alternative route will make an appropriate detour directiv The calculated alternative route is compared with the original track so that vou have the option to decide for vourself which version of the route vou would like to use x Y 7 3 2 Start track directly Start track directly starts the training unit without any changes You are given directional instructions on the map view but no beeps relating to turns or distances Select Start track directly and tap on A You can now decide whether taking account of your current position you would like to be guided to the starting point of the track or to the nearest point on the track Falk PANTERA User Manual 25 7 3 3 Set track start point Track start point dinag 01 06 AM You will now be guided from your current position to the track Please choose one of the following options 0 To the starting point of the track O Direct route to the track di sl Falk PANTERA User Manual KOPANTERA If vou have selected Convert route to track initiallv the route is calculated and displaved on the map By clicking on Route or Track you can switch back and forth bet
90. u can comment on POls from other users with your own experiences or simply rate them using up to 5 stars The Falk Community can of course also be used to expand your own content because you can download countless POls with pictures ratings and comments from other users to your device To be able to use these functionalities via the Navi Manager you first require free access with a user name and password If you already have log in data from the websites falk de or 123POl com you can use this If not register at 123POl com using the Register now for free button 14 8 1 Use Favourite lists from the Community When you click on the My favourites tab in the main window of the Navi Manager an overview list of your available own POI collections is displayed These may be POI collections which were generated with the KML import plugin On the other hand here you are also shown your own Favourite lists which exist at 123POl com to create a new favourite list at 123POl com click there in the menu on My favourite lists and then on the Create tab The favourite lists from the community are only displayed if you are currently registered with the community via the Navi Manager Your own POI collections mentioned above from a KML import or from 123POl com can be transferred to the sat nav in the usual way Content which is located in the online community is presented with a globe symbol 14 8 2 Upload new and amended ra
91. ues have a green background and they have a red background if you are on behind At the end of the time trial the time you have achieved is 1000 displayed and also whether you have beaten your 280 opponent s time 960 Your recorded times are saved If you compete several a times against a specific timed segment all of your times are be recorded and displayed in the detailed view for the particular time trial If you have beaten your opponent s time your new best time is adopted Falk PANTERA User Manual 28 KOPANTERA 9 Tour manager Tours are routes which contain several destinations one after the other Vou can compile your own tours on the device You can use all sorts of destinations to do this 9 1 Create new tour Tap In the main menu on Tour manager Plan tour din Ea 0107F AM Via Plan tour you can compile a tour for yourself Starting address The preset starting point is your current location gt Montluelweg 10 To change this simply click on the Start button You then start D 73760 Ostfildern have several options for entering a starting point e g address previous destinations etc Destination address a AT Polo StraB Vou can then also enter the destination point in the same B BT ted WAV Destination kemnat When you tap on Y the route is calculated and displayed a on the map Add further destinations In addition to the functions for the calculated route from the normal destination
92. vices Your contribution to correctly disposing of this product helps to protect the environment and the health of your fellow human beings The environment and health are endangered by incorrect disposal Material recycling helps to reduce the consumption of raw materials You can obtain further information about recycling this product from your local authority the municipal waste disposal companies or the shop in which you purchased the product Falk PANTERA User Manual 3 KOPANTERA WEEE Reg No DE 19715620 Aircraft and hospitals The use of electronic devices is prohibited in most aircraft in many hospitals and at lots of other places The device must not be used in such environments Alwavs switch vour device off wherever appropriate requests are made for vou to do so CE certificates and RoHs This device complies with the Directives of R amp TTE 1999 5 EC and the Directive 2002 95 EC OF THE EUROPEAN PARLIAMENT AND COUNCIL dated 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ROHS The link to the certificates can be called up here http www falk outdoor com de service zertifikate html Falk PANTERA User Manual 4 KOPANTERA 2 Introduction This manual describes the functions of the Falk PANTERA products Functions which do not applv to versions of products because thev are not included in the standard scope of supply for the product are marked optional
93. ween the track and the route on the map view The chequered flag shows the end point of the track To start routing using the alternative route select Route and tap on To retain the original track and start the track guidance without any turn off instructions select Track and tap on l You can now decide whether taking account of your current position you would like to be guided to the starting point of the track or to the nearest point on the track see picture on the right 26 PANTERA 8 My time trial Es This function allows you to race in competition mode against yourself or a virtual opponent Over a specific route which you can either record yourself or import you then compete against the time which your opponent needed to complete this segment During the time trial a view appears which shows you exactly where you currently are compared to your fictitious opponent and shows you on a graph how far ahead or behind you are see Chap 8 4 To start a time trial you must first select on which route you want to compete against your opponent You have the following possibilities for doing this 8 1 Against my timed route Here you can select a timed route which you have recorded yourself You then compete against your own previous performance With a timed route you record a specific section of a route e g an incline When you compete against such a timed route you can monitor the success of your training parti
94. ws Tap in the country selection list on the map which is currently inactive grey background for a country The prompt for the map priority then appears You then have the following options Falk PANTERA User Manual 37 2 PANTERA Premium Outdoor Map Stipulates that if present the Premium Outdoor Map will always be used recommended setting if you are travelling in an area for which you have a Premium Outdoor Map e g southern Germany if you have the Trans Alpine Premium Outdoor Map Premium Road Map Stipulates that the Premium Road Map will be preferred This setting is recommended if you are travelling for example with a road bike and want to use paved roads that are also available for car traffic Prefer Basic Map Plus OSM before Premium Partial Map e g southern Germany Stipulates that preference will be given to the Basic Maps even if a Premium Outdoor Map is available for part of the country This setting is recommended if you have installed the Trans Alpine Premium Outdoor Map and want to calculate a route which is no longer fully within the area covered by the partial map e g southern Germany In this case the Basic Map Plus OSM will be used for the corresponding country if available Example You are planning a tour involving several stops from Frankfurt to Florence You have installed the Trans Alpine Premium Outdoor Map and the Basic Maps Plus OSM for Germany Austria and Italy With the setting describ
95. xisting GPS connection and your current position as well as the altitude and speed is displayed The button takes you back to the settings menu The colouring provides you with information about the GPS status at a quick glance Red GPS signal is not sufficiently strong to allow positioning Signals are being received from fewer than 3 satellites Yellow GPS signal is sufficiently strong to allow positioning but not sufficiently strong to allow the current elevation to be determined Signals are being received from 3 satellites Green A high quality GPS signal is being received that allows your elevation to be determined Signals are being received from at least 4 satellites 10 4 3 Brightness Here you can set the brightness of the screen The brightness settings have a great influence on the power consumption of your navigation device To save power in battery mode turn down the brightness level In addition you can select whether the screen should automatically be dimmed when the battery is weak in order to save power Confirm your setting by tapping on A 10 4 4 Beeps The beeping noise output warns you with a beep when you are approaching a turn off or when you deviate from the calculated route 10 4 5 Calibrate compass To guarantee precise orientation of the compass you should recalibrate the compass at regular intervals To do this tap on Calibrate compass and follow the instructions on the device Note You should o
96. y time 6 3 Points of interest amp Your Falk PANTERA contains countless points of interest such as restaurants viewing points natural monuments places to stay places to visit and lots more If you select Points of interest on the destination entry screen a list containing all categories appears You can select individual categories by tapping on them or select all categories at once Py tapping on All top right Tap on oron if you want to search for a name of a category Next you must specify a search centre for your search The POls will then be displayed sorted according to their distance from this point The search centre can be a waypoint your current location the current destination along the route a city an address a position on the map or coordinates The results are then displayed in a list You then have the following options Name lt a ks Sort here you can sort the POls according to various Pate of IS criteria wee Stuttgart o Eberhardstra e 10 py 767 m D 70173 Stuttgart displays the selected POI on the map f Tafquinha Do starts the route calculation to the selected POI Benfica i Double click opens the detailed view for a POI oo Strasse ZO m T so allows you to search for a POI by entering text Ib G stehaus 1 l Cottastrasse 14 64m D 70180 Stuttgart shows you special Premium POIs around the Man bata search centre If these exis

Download Pdf Manuals

Related Search

Related Contents

FAMILYFORCE.CA USER GUIDE For FamilyForce Website  Philips Walita QuickTouch Garment Steamer RI515/25  INTRODUÇÃO Á LÓGICA DE PROGRAMAÇÃO  (3) 規 格  SPARK MODERN FIRES  Brodit ProClip  NGM-Mobile Dynamic Wing 4GB White  DX-CR212 11-in-1 Memory Card Reader / Lecteur de carte  18. September 2010 - DGRH  SAP HR Real Time Scenarios How can we create customer specific  

Copyright © All rights reserved. Failed to retrieve file