PDF file - Primare
Contents
1. DE LOCATING A POSITION ON THE DISC You can skip between tracks to locate a particular track on the disc or you can scan forwards or backwards to locate a position within a track To skip forwards through the tracks Press the P PI button on the front panel or press the Pl button on the remote control To skip back through the tracks Press and hold the P PI button on the front panel or press the I4 button on the remote control The front panel display shows the track number Release the button to start playing the selected track from the beginning To scan through the disc Press the A or PP button on the remote control once to scan at 4X speed or twice to scan at 8X speed The display shows the position within the track Press the P button on the front panel or the gt button on the remote control to start playing from the position you have located USING THE REMOTE CONTROL This page explains how to use the C24 remote control to operate the CD32 and how to fit the batteries control FITTING THE BATTERIES Before using the remote control you need to insert the two button cells supplied with the C24 Open the cover on the back of the remote control by pressing the tab gently Insert the two batteries positive side uppermost Replace the cover and push until it clips into place Note Replace only with 3V button cells AN type CR2025 or equivalent When disposing of old batte2. Liquid filled objects such as vases should not be placed on the equipment 4 Ventilation Do not place the equipment on a bed sofa rug or similar soft surface or in an enclosed bookcase or cabinet since ventilation may be impeded We recommend a minimum distance of 50mm around the sides and top of the appliance to provide adequate ventilation CI I bse The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the VAN of sufficient magnitude to constitute a risk of electric shock to persons product 5 Heat Locate the appliance away from naked flames or heat producing equipment such as radiators stoves or other appliances including other amplifiers that produce heat 6 Climate The appliance has been designed for use in moderate climates 7 Racks and stands Only use a rack or stand that is recommended for use with audio equipment If the equipment is on a portable rack it should be moved with great care to avoid overturning the combination 8 Cleaning Unplug the unit from the mains supply before cleaning The case should normally only require a wipe with a so
3. USINg the Tunctions avallaD le from 10te control FRONT PANEL CONTROLS Standby Switches the CD32 to standby or switches it on from standby Stop Open When the disc is playing pauses the disc When the disc is paused stops the disc When the disc is stopped opens or closes the CD tray Press and hold opens the CD tray Play Skip gt Pl When the disc is stopped plays the disc When the disc is playing skips to the next track Press and hold skips back through the tracks ule PLAYING A DISC To insert a disc Press the button on the front panel or on the remote control to open the tray Place the CD in the tray with the label facing upwards Press the button again to close the tray or press the button The display shows followed by the number of tracks and total time To play the disc Press the button on the front panel or the B I button on the remote control While a disc is playing the display shows the current track number and the elapsed time of the current track for example To pause the disc Press the button on the front panel or the remote control while the disc is playing The display shows the pause symbol You can then resume play by pressing the P PI button on the front panel or the amp M button on the remote control To stop play Press the button on the front panel or the remote control Ciba ZO
4. on the display will scroll across To select a folder Press the or W button to step between the folders The display shows the current folder highlighted For example Animal fed Tone She Wolf Press the gt or SELECT button to display the tracks in the highlighted folder Press the lt button to return to the list of folders bse To select a track Press the or W button to step between tracks The display shows the current track highlighted 04 Home mp3 O5 Acapella mp3 06 Scream mp3 07 Emancipate mp3 08 Brave mp3 Press the P I or SELECT button to play from the highlighted track As each track plays the display shows the artist and track name or filename if this information is not available elapsed time and track duration or VBR for Variable Bit Rate tracks To step through the tracks While the tracks are playing Press the IM or PT button to step between the tracks in the current folder To scan through a track Press the or PP button Press the button to start playing from the position you have located Repeat and shuffle Press the REPEAT button to repeat the Track T Folder F or All A Press the blue B button to shuffle the tracks within a folder TECHNICAL SPECIFICATION Every component of the CD32 from the CD transport to the audio output stage has been designed to achieve the highest possible audio performa
5. CD32 p R M A R E AUDIOPHILE COMPACT DISC PLAYER USER GUIDE Ciba ZO DE WELCOME Welcome to the Primare CD32 Your CD32 is a high quality compact disc player with analogue and digital outputs USB input IR in out On off CD32 CD PLAYER PRIMARE AB DESIGNED IN SWEDEN DIGITAL OUTPUT CAUTION lt DO NOT OMH c 4 P OUT COAXIAL OPTICAL RF REMOTE ___ ____ gt ___ _ XLR R RCA XLR L SPDIF TOSlink AES EBU Trigger in out RS 232 Not active Power SS Fs YY Analogue outputs Digital outputs GETTING STARTED Set up your CD32 in four simple steps I UNPACK THE CD32 Your CD32 is supplied with the following components Mains cable C23 remote control Two batteries for the remote control If any of these items are missing please contact your supplier We recommend you retain the packaging in case you need to transport the unit at a later date 2 CONNECT TO AN AMPLIFIER Analogue outputs The analogue output provides for both the recommended balanced XLR outputs and the conventional unbalanced RCA for connection with an appropriate stereo amplifier or preamplifier Connect the appropriate outputs to your amplifier or preamplifier using a suitable cable Digital outputs Alternatively the CD32 Compact Disc Player provides one SPDIF one TOSlink and one AES EBU digital output for connection to a digital preamplifier or digita
6. Hz signal from a CD to either 48kHz or 96kHz which improves fine detail sound stage depth and image separation Press the red R button to select between 44 1K 48K and 96K recommended PROGRAMMING TRACKS The CD32 Compact Disc Player allows you to programme a sequence of tracks on the current disc You can then play just the tracks you have programmed To programme a sequence of tracks While the disc is stopped Press the green G button The front panel display shows Use the 1 9 and 10 buttons to enter the numbers of the tracks you want to play As you enter each track number the front panel display shows the current track preceded by the tracks you have already programmed in small text 02 04 06 08 P To play the selection you have programmed Press the button As the tracks play the display shows the sequence of track numbers you have programmed with the currently playing track highlighted 02 40 06 10 12 14 P To step through the programmed tracks While the tracks are playing Press the or PI button To clear the programme Press the button PLAYING MUSIC FILES FROM A USB DISK You can play MP3 WMA files on a USB disk or memory stick by connecting it to the USB port To select the USB disk Press the AUDIO button The display shows USB It will then show an alphabetical list of the folders containing MP3 files on the USB disk Names that are too long to fit
7. Ltd http www interface co uk Safety compliance This product has been designed to meet the IEC 60065 international electrical safety standard CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION lo reduce the risk of electrical shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel WARNING reduce the risk of fire or electrical shock do not expose this apparatus to rain or moisture CAUTION In Canada and the USA to prevent electric shock match the wide blade of the plug to the wide slot in the socket and insert the plug fully into the socket This product is designed and manufactured to meet strict quality and safety standards However you should be aware of the following installation and operation precautions I Take heed of warnings amp instructions You should read all the safety and operating instructions before operating this appliance Retain this handbook for future reference and adhere to all warnings in the handbook or on the appliance 2 Water and moisture The presence of electricity near water can be dangerous Do not use the appliance near water for example next to a bathtub washbowl kitchen sink in a wet basement or near a swimming pool etc 3 Object or liquid entry Take care that objects do not fall and liquids are not spilled into the enclosure through any openings
8. d of time 14 Abnormal smell If an abnormal smell or smoke is detected from the appliance turn the power off immediately and unplug the unit from the wall outlet Contact your dealer immediately 15 Servicing You should not attempt to service the appliance beyond that described in this handbook All other servicing should be referred to qualified service personnel 16 Damage requiring service The appliance should be serviced by qualified service personnel when A the powersupply cord or the plug has been damaged or B objects have fallen or liquid has spilled into the appliance or the appliance has been exposed to rain or the appliance does not appear to operate normally or exhibits a marked change in performance or the appliance has been dropped or the enclosure damaged UO m P R E THE SOUND AND VISION OF SCANDINAVIA PLEASE VISIT PRIMARE NET FOR MORE INFORMATION ABOUT OUR PRODUCTS PRIMARE AB LIMSTENSGATAN 7 21616 LIMHAMN SWEDEN 1
9. e DIM button to step through the three levels of illumination and blank The display auto dims after a few seconds and returns to the selected brightness when you operate any control REPEAT PLAYBACK You can play the current track repeatedly or repeat the entire disc To repeat the current track While the disc is playing Press the REPEAT button The front panel shows the C5 symbol and TRK To repeat the entire disc Press the REPEAT button twice The front panel shows the C5 symbol and ALL To turn off repeat Press the REPEAT button again The C symbol in the display will be cleared SHUFFLE PLAYBACK Shuffle playback plays the tracks on the disk in random order To play the tracks in random order While the disc is playing Press the blue B button The front panel shows the symbol In shuffle mode you can pause a track by pressing the P I button or skip a track by pressing the Pl button To turn off shuffle Press the blue B button again The S symbol in the display will be cleared Bie GbE PLAYING A SPECIFIC TRACK You can play from any track by entering the track number on the remote control To play from a specific track Specify the track number by pressing one of the buttons 1 9 To enter a two digit track number press the 10 button first For example to enter 16 press the 10 button followed by the I and 6 buttons UPSAMPLING The CD32 allows you to upsample the 44 k
10. ft damp lint free cloth Do not use paint thinners or other chemical solvents for cleaning We do not advise the use of furniture cleaning sprays or polishes as they can cause indelible white marks if the unit is subsequently wiped with a damp cloth 9 Power sources This appliance must be connected to a mains socket outlet using the supplied power cord 10 disconnect this apparatus from power you must disconnect the power cord Make sure the power cord is always easily accessible Only connect the appliance to a power supply of the type described in the operating instructions or as marked on the appliance This is a Class device and must be earthed The power switch is a single pole switch When the switch is in the Off position the appliance is not completely disconnected from the main power 10 Power cord protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords and plugs and the point where they exit from the appliance Grounding Ensure that the grounding means of the appliance is not defeated 2 Power lines Locate any outdoor antenna aerial away from power lines 13 Non use periods If the unit has a stand by function a small amount of current will continue to flow into the equipment in this mode Unplug the power cord of the appliance from the outlet if left unused for a long perio
11. l surround processor Connect the appropriate output to your preamplifier or surround processor using a suitable cable 3 CONNECT POWER Plug one end of the mains cable supplied with the CD32 into the power connector on the back panel and connect the other end to a wall socket If this cable is not suitable for your power outlets please contact your supplier for an alternative cable Note See Phase page 8 for information about getting the best sound from your CD32 WARNING Always disconnect the AN CD32 from the mains power before connecting or disconnecting any cables Switch on the CD32 using the switch on the back panel The standby indicator will light up on the front panel To switch on from standby Press the button on the front panel or remote control The display shows PRIMARE Press the button again to switch to standby CI 4 PLAY A CD Press the button on the front panel or remote control to open the tray Place the CD in the tray with the label facing upwards Press the button on the front panel or the gt button on the remote control to close the tray and start playing the disc For more information about playing a CD see the next page For more information about playing music files from a USB disk see Playing music files from a USB disk page 7 USING THE CD32 bka pe ane uem 2
12. nce FEATURES Mechanism Asatech 8210 60 02 Sanyo SF PIOIN D A Converter 2x PCM 1704 706 digital filter 24 96kHz OUTPUTS Unbalanced output 2 1 VRMS 3900 impedance Balanced output 4 VRMS 470 impedance Digital outputs Coaxial SPDIF Optical TOSlink AES EBU XLR PCM Sample Rate 44 kHz Upsampling 44 kHz 48kHz or 96kHz USB PORT File format MP3 or WMA Disk format FATI6 or FAT32 PERFORMANCE Frequency response 20Hz 20kHz 0 5dB Signal to noise ratio 20Hz 20kHz unweighted 100 dB THD 20Hz 20kHz 0 0126 GENERAL Power Consumption Operating 25 W Idle 22W Standby 0 5W Size 430 x 375 x 106 mm WxDxH Weight 9 kg Color Black or trtanium Ciba 2 USE RIG UNE ADDITIONAL INFORMATION These instructions help you get the best possible sound from your CD32 and give information about configuring its advanced settings PHASE The phase of the AC supply can make a significant difference to the sound Ensure that the live pin of the AC power cable Is connected to the left hand pin of the power connector viewed from the back panel Live E BURN IN Your Primare will start to sound best after an initial burn in of approximately 24 hours You will notice a further smaller improvement in sound quality for at least another 3 days playing RS232 AND TRIGGERS The RS232 input allows you to connect the CD32 to a controller system Fo
13. r more information please contact Primare or visit www primare net The Trigger input allows the CD32 to be switched on by another device such as an 132 The Trigger output allows the CD32 to switch on other devices SETTING THE TRIGGER INPUT AND IR INPUT Press the button to switch on the CD32 Press and keep holding down the button NOTE You need to keep the 0 button held down throughout this procedure When the version number is displayed press the button The display shows TRIG Press the P PI button to select between TRIG ON to enable the trigger input or TRIG OFF to disable it Press the button again The display shows Press the P PI button to select between IR FRONT to control the CD32 using a remote control pointed at the front panel or IR BACK to control it via the IR input on the back panel Release the button to return to normal operation COPYRIGHT AND ACKNOWLEDGMENTS Copyright 2010 2103 Primare AB All rights reserved Primare AB Limstensgatan 21616 Limhamn Sweden http www primare net Issue CD32 2 The information in this guide is believed to be correct as of the date of publication However our policy is one of continuous development and so the information is subject to change without notice and does not represent a commitment on the part of Primare AB Primare 15 a trademark of Primare AB This guide was produced by Human Computer Interface
14. ries please be considerate to the environment into the remote Programme a sequence of tracks Change the sampling rate Select item on CDR USB menu Display folders on CDR USB menu Increase volume of amplifier Decrease volume of amplifier Open or close the CD tray or stop the disc Change the displayed information Select between disc and USB CI Switch on off Enter track number Enter number gt 10 Shuffle tracks Move up on CDR USB menu Select CD mode Display tracks in a folder on CDR USB menu Move down on CDR USB menu Skip to the next track Restart the current track or skip to the previous track Reverse scan Play or pause the disc Forward scan Repeat the track or disc Change the display brightness ADVANCED FEATURES This chapter explains how to use the more advanced features of the CD32 and how to play audio files from a USB disk These functions are accessed from the remote control CHANGING THE FRONT PANEL DISPLAY You can choose how the time is shown on the front panel display and change the brightness To change the time display Press the DISP button The display switches between the following four options Flapsed time for the current track 3 45 Remaining time for the current track 1 15 er Elapsed time for the entire disc au 18 45 Remaining time for the entire disc 41 15 RT To change the front panel display brightness Press th
Download Pdf Manuals
Related Search