CD-70 Utility User Manual
Contents
1. Hex Format 1Bh 11h Description ESC DC2 ASCII Format Dec Format Hex Format Description ESC DC3 ASCII Format Dec Format Change the display mode to the overwrite mode In this mode the cursor will move rightward and begin from the upper left end position When the cursor reached the end of the upper line the cursor will move down to the bottom left end position to continue When the cursor reached the end of the bottom line it will move up to the upper left end position and overwrite the previous characters Vertical scroll mode ESC DC2 027 018 1Bh 12h Change the display mode to the vertical scroll mode In this mode the cursor will move rightward The cursor will begin from the upper left end position until it reached the end of the upper line the cursor will then move down to the bottom left end position to continue until it reached the end of the bottom line Then CD7220 CD3220 will scroll the bottom line up to replace the upper line The bottom line will be cleared and the cursor will continue to the first position of the bottom line Horizontal scroll mode ESC DC3 027 019 Hex Format 1Bh 13h Description Change the display mode to the horizontal mode In this mode the extend of the cursor activity is bond by predefined range limited to the upper line Please refer to Set or cancel window command where the default window is the whole upper line Once the cursor activity reached2. 2 Description CLR ASCII Format Dec Format Hex Format Description CAN ASCII Format Dec Format Hex Format Description 1Bh 57H 0Ih x1 x2 y Reset the window on the display When s 0 window is cancelled values x1 x2 and y are not required When s 1 the window will be reset values x1 x2 and y are required The x1 and x2 set the position of the left column and right column respectively of the window The y sets the upper line or the lower line of the window This function is valid within the horizontal mode Clear display screen and clear string mode CLR 012 OCh All the display characters will be cleared and the string mode will be cancelled Clear current line and cancel string mode CAN 024 18h The current line is cleared and the string mode is cancelled 1 10 Customer Display Mode 20x2 expand command details ESC i s dld2d3 dn CR ASCII Format Dec Format Hex Format Description ESC j s dld2d3 dn CR ASCII Format Dec Format Hex Format set media ESC isd1d2d3 dn CR 027 105 s d1d2d3 dn 013 1Bh 69h s d1d2d3 dn Odh 2h 11h 12h When s and 10h equal 10h save video file path 20h lt dn lt ffh O lt n lt 400h s 1h When s 1h clear current play video list and set new d1d2d3 dn video file path When s 2h append current play video list d1d2d3 dn file path When s 11h clear current play video list and set new dld2d3 d
3. L CR ASCII Format Dec Format Hex Format ASCII Format Dec Format Hex Format Description ESC R ASCII Format Dec Format Hex Format Description ESC K ASCII Format Dec Format Hex Format Description ESC 1 x y ASCII Format Dec Format Hex Format Description ESC ASCII Format Dec Format Hex Format Description ESC W s x1x2 y ASCII Format Dec Format Hex Format HOM 011 OBh The cursor will move to the left end position of the upper line Move cursor to left most position Move cursor to left most position ESC L 027 091 076 1Bh S5Bh 4Ch CR 013 ODh The cursor will be moved to the left end position of the current line Move cursor to right most position ESC R 027 091 082 1Bh S5Bh 52h The cursor will be moved to the right end position of the current line Move cursor to bottom position ESC K 027 091 075 1Bh S5Bh 4Bh The cursor will be moved to the right end position on the lower line Move cursor to specified position ESC 1x y 027 108 x y 1Bh 6Ch x y The cursor will be moved to the x column on the y line 1 lt x lt 20 l lt y lt 2 Initialize display ESC 027 064 1 Bh 40h The data in the input buffer will be cleared and reset from default Reset the window ESC W s x1 x2 y 027 087 000 027 087 001 x1 x2 y 1 Bh 57h 000 1 lt x1 lt x2 lt 20 1 lt y lt
4. bg_Blue JPG Line three eal Line Four Line Five si Line six ed cane Fig 29 Advance Setting x Text Mode Demo message setting Line one 0123456789abcdefghijk mnopgrstuyneyzo IDA r e H R CE Line two 01234567 69ebcdeFghijkimnoporstuyvwexyz mp e AL eee CE Line three 011234567S9abcdefghijklmnopgrstuviayzo eee OR 13 E Line Four 0123456769abcdefghijkImnopgrstuywxya OEP ORG AL UD Line five 01234567 89abcdeFghijkimnoporstuyvwexyz OEP OB 44h ee Line ste 01234567 89abcdef ghijklmnoporstuvwsye Dee OBO 1 gt Background image Line one imgWibg_Blue JPG Ea Linetwo imaitbg Blue iPE O00 fsi Line three mgh bg_ Blue JPG 0 ka Line Four imottbg Blue JPG ea Line five mgh bg_ Blue JPG Ey Line six imotibg Blue JPG A cme _ Fig 30 4 9 Reset Port Reset Port will reset the COM Port back to initial default Please follow the section 3 2 for initial COM port setup l Dispaly_Tool x Port Mame Port Mame New Port Mame COM 40 Fig 31 4 10 OK When you click on the OK icon the setting will be saved and the video amp image will start showing on CD 70 4 11 Exit Virtual Line Display Utility Please find the icon on task menu bar like Fig 32 Click the mouse right key the quick menu will shown like Fig 33 Please choose Exit to quit Virtual Line Display Utility Set font Swich to 20x2 Display setting Exi
5. command will reset the content of EEPROM eg demo scroll data user define character baud rate setting n 3lh clear all EEPROM contents n 32h clear upper line data message n 33h clear lower line data message 1 1 3 Save data for demo display STX 05 L n m ETX ASCII Format Dec Format Hex Format Description Save demo message to EEPROM STX 05 Ln m ETX 02 05 76 n m 03 02h 05h 4Ch n m 03h Save demo message for upper line and bottom line n 31h save data message for upper line n 32h save data message for lower line 1 1 m data message the maximum data character is under 200 4 Run Demo message STX 05 D 08 ETX Run demo message ASCII Format STX 05 D 08 ETX Dec Format 02 05 68 08 03 Hex Format 02h 05h 44h 08 03h Description Run demo message for the display 1 2 CD 5220 II STAND AND MODE COMMAND set the string display mode write string to upper line set the string display mode write string to lower line upper line message scroll continuously is a E a five curor ig non a pio ESC L 1B 5B 4C move cursor left most move cursor to left most ESC R 1B 5B 52 move cursor to right most pe fire ESC K 1B 5B 4B move cursor to bottom ESC 1x y IB6Cxy move cursor to specified 1 lt x lt 20 y 1 2 position ESC 1B 40 initialize display clear display screen and clear string mode clear cursor line and clear string mode Table 6 1 REMARK While using
6. in the future Cancel Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for 3 LineDisplay serial port emulator Click Finish to close the wizard Back Finish Cancel Fig 8 Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on pour computer on the hardware installation CD or on the Windows Update Web site with pour permission Can Windows connect to Windows Update to search for software Yes this time only O Yes now and every time connect a device O No not this time Click Next to continue Next gt Cancel Fig 9 Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for curent and updated software by looking on pour computer on the hardware installation CD or on the Windows Update Web site with pour permission Read our privacy policy Can Windows connect to Windows Update to search for software O Yes now and every time connect a device O No not this time Click Next to continue Found New Hardware Wizard Please wait while the wizard installs the software 3 LineDisplay serial port emulator i Cy no Setting a system restore point and backing up ald files in case your system needs to be restored in the future Completing the Found New Hardware Wiza
7. 1 1 PREFACE The Virtual Line Display Utility helps to prepare Partner Tech CD 70 as a customer display and or a digital signage display The CD 70 Virtual Line Display Utility commands are identical to that on CD 7220 so customers can adopt existing commands directly on CD 70 without re designing the software again 2 SPECIFICATION Model Name CD 70 Panel Resolution 800x480 20x2 mode Text Photo Video Display Mode 20x6 mode Text only 3 Utility installation 3 1 Installation Guide Find the appropriate utility for different OS then please follow the installation process like the snapshots below i Setup Virtual Line Display Welcome to the Virtual Line Display Setup Wizard This will install 1 0 0 0 on your computer It is recommended that you close all other applications before continuing Click Next to continue or Cancel to exit Setup i Cancel Fig 1 ie Setup Virtual Line Display Select Destination Location Where should Virtual Line Display be installed LJ Setup will install virtual Line Display into the Following folder To continue click Next IF you would like to select a different folder click Browse C Program Files Partner virtual Line Display Gt least 18 5 MB of free disk space is required Fig 2 i Setup Virtual Line Display Select Start Menu Folder Where should Setup place the program s shortcuts To continue click Next IF you would like to select a diffe
8. C uA CR 1B 75 41 data x 40 OD upper line display ESC u B CR 1B 75 42 data x 40 OD bottom line display D ESC u D CR 1B 75 44 data x 40 0 upper line message scroll sees mmm a ESC uE CR 1B 75 45 hh mm OD display time ESC u F CR 1B 75 46 data x 40 OD upper line message scroll e ee eee s OD ESC ul CR 1B 75 49 data x 40 two line display ESC RS CR 1B OF OD change to UTC standard mode Table 6 6 1 6 AEDEX mode command list 1 0R fi 23 31 data x 40 upper line display 2 CR 21 23 32 data x 40 bottom line display 5 i CR 4 CR 21 23 34 data x 40 upper line message scroll T M CR 21 23 35 hh mm _ ODidisplay time 6 CR 21 23 36 data x 40 upper line message scroll 1 9 CR 21 23 39 data x 40 two line display Table 6 7 1 7 DSP 800 mode command list Code description hex Function descriptions EOT SOH P n ETB 04 0150 n 17 n 31h 58h move cursor to specified position 04 01 43 nm 17 clear display range from n 3lh lt n lt m lt 58h position to m_ position and move cursor to _n_ position 0401 46n 17 OOh lt n lt FFh blink display screen 04 01 25 17 initialize display Table 6 8 REMARK 1 8 EPSON ESC POS command list er ee ps o T CR OD move cursor to left end position DB fmovecursorso home positon _ 1 9 CD7220 CD3220 standard command details ESC DCI Overwrite mode ASCII Format ESC DCI Dec Format 027 017
9. PAIRIUNER CD 70 Utility User Manual Table of Contents li CERBFAE spiana init editti 2 2 PE PICA oliena iaia ere 2 3 UTILITY INSTALLATION session brenta tnt lenta 2 a O O O E ver Tenn rent wert vert 2 32 Initial Compor SetupGUIde uni ona ore aiar 6 A U GUIDE liana EIA E E E eee ed eo hee e nes Gaeunases 7 E SRI IENA 9 0 Miccoli 10 dx MUS SOI POD ina iii pila 10 44 Displi Sberl E 11 4 5 Auto display on the second display iii 14 4 6 Display when the system Start 14 EF Me OI pasate a ral aa ii 14 45 lla 15 44 Reset PON iese ao ch vtetucorventbantsaa E E E E E a E 16 4 10 Ori 16 4 11 Pv Depia 16 5 UNINSTALL THE VIRTUAL LINE DISPLAY UTILITY Lerro 17 APPENDIX ll COMMANDS 256444 4 duleuoscasassass lt ela Ae IONE 19 1 1 SYSTEM COMMAND DETAILS ll lla 19 1 1 1 OaE DES ripa Alici 19 ik RET EEPRON e E 19 1 1 3 Save data for demo display 19 1 1 4 Run Demo message 20 12 CD 5220 HJISTAND ANDMODE COMMAND iriiaa ran 20 ko ADM G70 COMI Ei E 21 14 UTC standard mode command ISLA IAA EV at 21 1 5 UTC enhanced mode command liISt 22 LO AEDEXMOE command Usi usrik gelo la ala 22 I7 Bie seo 60 modenesi 22 1 8 EPSON ESC POS command lISt vr 23 1 9 CD7220 CD3220 standard command detalls 23 1 10 Customer Display Mode 20x2 expand command details 2
10. ayed for each image B The image file supported are Bmp jpg png emf tiff exif gif C To avoid image distortion the suggested image ratio are shows as below Display Style 2 800 x 480 Display Style 3 4 800 x 364 Display Style 7 10 13932 K 221 Display Style 11 14 367 x 343 4 4 Display Style CD 70 x CL 0 Setting Text Mode Display20x2 Video Add Delete Delete all Image File Path C Program Files Partner irtual Line Display Ima Ima Delete all Transition Time Display Style 19_Bottom Text LJ Video 16 9 RI Ir Preview Auto display on the second display Display when the system start Set Font eves Com Port COM20 Reset Port OK Cancle Fig 25 Display Style has 14 styles as shown on Table 1 You can choose the style on Fig 26 menu By clicking Preview you can preview the display setting result CO 70 x C0 70 Setting Text Mode Display20x2 Video File Path Ad Delete all Ha Image File Path Add Delete all Transition Time js 9 Bottom Text iL video 16 9 Ri Irm 1 Full Video 2 Full Image 3_Top Text Image 4_Bottom Text Image S_Top Text video 6 Bottom Text video Top Text L video 16 9 Rj Image Ri video 16 9 iL Display Style Auto displ Set Font 11 Top Text L Video 4 3 R Image 12 Top Text Rd video 4 3 L I
11. command ESC QA or ESC QB these two commands can be used with terminal printer TP2688 or TP3688 While using command ESC QA or ESC QB other commands can not be used except when using command CLR or CAN to change operating mode When using command ESC QD the upper line message will scroll continuously until a new command is received it will then clear the upper line and move the cursor to the upper left end position Set international font for CD7220 CD3220 Table 6 2 Select code for CD7220 CD3220 Table 6 3 International font set Gi International font set International code set A A n U S A N NORWAY Compliance with ASCII code GERMANY SWEDEN Compliance with JIS code ITALY DENMARK I Compliance with RUSSIA code JAPAN DENMARK II Compliance with SLAVONIC code U K SLAVONIC PC858 FRANCE RUSSIA WPC1252 reserved Function description clear display clear upper line and move cursor to upper left end position clear bottom line and move cursor to bottom left end position set period to upper line last n position 31h lt n lt 37h set line blinking upper line n 1 bottom line n 2 clear line blinking upper line n 1 bottom line n 2 Table 6 4 1 4 UTC standard mode command list Code description hex Function description carriage return ESC d 1B 64 change to UTC enhanced mode Table 6 5 1 5 UTC enhanced mode command list Code description hex Function description ES
12. e right end of the lower line the lower line will scroll up to replace the upper line the lower line is cleared and ready to continue characters there after Horizontal scroll mode The cursor will remain stationary Move cursor up ESC A 027 091 065 1Bh SBh 41h Move the cursor up one line When the cursor is on the upper line this command operates differently depending on the display mode 1 Overwrite mode The cursor is moved to the same column on the lower line Vertical scroll mode The characters display on the upper line are scrolled to the lower line and the upper line is cleared The cursor will remain at the same position Horizontal scroll mode The cursor will remain stationary Move cursor down Move cursor down ESC B 027 091 066 1Bh 5Bh 42h LF 010 OAh Move the cursor down one line When the cursor reached the lower line this command operates differently depending on the display mode 1 Overwrite mode The cursor is moved to the same column on the upper line Vertical scroll mode The characters display on the lower line are scrolled to the upper line and the lower line is cleared The cursor will remain at the same position Horizontal scroll mode The cursor will remain stationary Move cursor to home position Move cursor to home position ESC H 027 091 072 1Bh S5SBh 48h ASCII Format Dec Format Hex Format Description ESC
13. ideo 16 9 R Im Preview f Auto display on the second display Display when the system start Cai Com Port COMZ20 Reset Port OK Cancle Fig 22 B Display 20x6 Choose this mode will have 6 lines of 20 characters per line display Fig 23 4 2 Video You can manage the videos files through add delete or delete all as shown on Fig 24 The default supported video format is shown below A Default video format supported for Windows XP is mpeg wav avi Video format depends on the codec installed on Windows Media Player If your video format is not supported you can upgrade the decoder codec from the following 3rd party link http download cnet com Media Player Codec Pack 3000 13632_4 10749065 html tag dropDownForm productL isting pop B Default video format supported for Windows 7 is rmvb avi mkv mov mpg mp3 mp4 mpa wma flv xv ts divx xvid ogg ogm CD 70 x CD O Setting Text Mode Display20x2 File Path C Program Files Partner virtual Line Display wideo File Path Delete al Transition Time 35 Display Style 9_ Bottom Text L Video 16 9 R In Preview Auto display on the second display Display when the system start Set Font Advance Com Port COM2ZO Reset Port Fig 24 4 3 Image Still Photo You can manage the image files through add delete or delete all as shown on Fig 25 marked in red square A Transition Time Time displ
14. is default setting 4 6 Display when the system start Choose this setting the video and image will automatically starts when OS starts up 4 7 Set Font Users can set up the words color font and size by Set Font icon The default setting is Font Courier New Font Style Regular Font size 50 Font color red Font style Hi Regular ea Estrangelo Edessa Ikalic Fisedsys i Bald O Franklin Gothic Mediur Bold Italic Gautami O Georgia Impact Effects Strikeout _ Underline a Color MM Red vw Script Western wt Fig 28 4 8 Advance You can set demo message and background image by click on Advance icon The suggestion image ratio for each line is 800x65 If the image is bigger than this suggested image ratio the background image will cut the image to 800x65 from left to right and from top to bottom A Text Mode Display 20x2 mode You can only change Line and Line 2 Demo message and Background image like Fig 29 B Text Mode Display 20x6 mode You may change all 6 Lines of Demo message and Background image like Fig 30 Advance Setting Text Mode Demo message setting Line one 01234567S9abcdefghijklmnopgrstuvmxyzo ae Py AT gt Line two 0123456789 abcdefghijkimnoporstuywey2es De Pe ORO fb gt eT Line three Line Four Pe Line Five Line six Background image Line two CitProgram Files Partner Virtual Line Display Img
15. list change customer display back ground image ESC ms d1d2d3 dn CR 027 109 s d1d2d3 dn 013 1 Bh 6dh s d1d2d3 dn Odh 20h lt dn lt ffh 1h 2h 3h 4h 5h 6h 7h 11h 12h 13h 14h 15h 16h 17h When s and 10h equal 10h save back ground image O lt n lt ffh s When s 1h 11h change display line one back ground image use d1d2d3 dn image file path When s 2h 12h change display line two back ground image use d1d2d3 dn image file path When s 7h 17h change all display back ground image use d1d2d3 dn image file path if Customer Display Mode with 20x6 the following effective When s 3h 13h change display line three back ground image use d1d2d3 dn image file path When s 4h 14h change display line four back ground image use d1d2d3 dn ESC o n ASCII Format Dec Format Hex Format Description image file path When s 5h 15h change display line five back ground image use dld2d3 dn image file path When s 6h 16h change display line six back ground image use d1d2d3 dn image file path When s 11h 12h13h 16h the current image file path save and replace display line x back ground image set media volume ESC on 027 111 n 0 lt n lt 100 1Bh 6fh n OOh lt n lt 64h n set with media volume
16. mage with global vision we make it POSsible PARNER CARE TRUST RESPONSIBILITY Fig 27 Table 1 Display Style Layout List 1 Full Video 2 Full Image 4 with global vision we make it POSsible PARNER CARE TRUST RESPONSIBILITY 3 Top Text Image 4 Bottom Text Image with global vision we make it POSsible with global vision we make it POSsible 5 Top Text Video CD 70 CodePage 950 6789 lt gt ABCDEFGHI PARNER 7 Top Text L Video 16 9 R Image CD 70 CodePage 950 6789 lt gt ABCDEFGHI L U CocePages 950 6789 lt gt ABCDEFGHI 11 Top Text L Video 4 3 R Image CD 70 CodePage 950 O109 7x gt 7 CARBCDEEFGHI with global vision we make it POSsible PARIINER 6 Bottom Text Video CD 70 CodePage 950 6789 lt gt ABCDEFGHI 8 Top Text R Video 16 9 L Image CD 70 CodePage 950 6 893 lt gt GABCDEFGHI CD 70 CodePage 950 67893 lt gt ABCDEFGHI 12 Top Text R Video 4 3 L Image CD 70 CodePage 950 6 3893 lt gt ABCDEFGHI with global vision we make it POSsible PARTINER 13 Bottom Text L Video 4 3 R Image 14 Bottom Text R Video 4 3 L Image with global vision with global vision we make it POSsible we make it POSsible FARIINER PARNER 4 5 Auto display on the second display Choose this setting the display screen will play on CD 70 by th
17. mand completed successfully reboot system now i Cancel Fig 17 4 Utility Guide A To start the utility please find Virtual Line Display from Windows start menu then select the Virtual Line Display L LineDisplay_Tools fa Virtual Line Display 5 Uninstall virtual Line Display i Virtual Line Dispal Fig 18 B The default setting of Virtual Line Display Utility is shown as the Fig 19 Text mode 20x2 Display style 9 image transition time 3 seconds CD 70 x eI Pe Amn CD 0 Setting Text Mode Display 20x2 a Video File Path File Path Delete all Transition Time 35 Display Style 3 Bottom Text L Video 16 9 R Irr Preview Auto display on the second display Display when the system start Set Font Advance Com Port COMeO Reset Port Fig 19 C You can find a miniature icon of the utility on the task bar like Fig 20 By double clicking the icon the utility Fig 19 will pop up D You also access the simple menu by the right click on the mouse like shown on Fig 21 Set font Swich to 20x2 Swich to 20x6 Display setting Exit Fig 21 4 1 Text Mode Text Mode has Display 20x2 and Display 20x6 modes A Display 20x2 Choose this mode will have 2 lines of 20 characters per line display CD 70 x 0 0 Setting File Path Delete al Transition Time 3s Display Style 9_Bottom Text L V
18. mode Overwrite mode When the cursor reached the left end of the lower line it will continue to the right end of the upper line overwrite previous characters When it reached the left end of the upper line it will continue to the right end of the lower line Vertical scroll mode When the cursor reached the left end of the lower line the lower line will scroll up and replace the previous upper line the lower line will be cleared and the cursor will continue to the right end of the lower line Horizontal scroll mode The cursor will remain stationary Move cursor right Move cursor right ASCII Format Dec Format Hex Format ASCII Format Dec Format Hex Format Description ESC A ASCII Forma t Dec Format Hex Format Description ESC B L F ASCII Format Dec Format Hex Format ASCII Format Dec Format Hex Format Description ESC H HOM ASCII Format Dec Format Hex Format ESC C 027 091 067 1Bh SBh 43h HT 009 09h Move the cursor to the right When the cursor reached the right end this command operates differently depending on the display mode Overwrite mode When the cursor reached the right end of the lower line it will continue to the left end of the upper line overwrite previous characters When it reached the right end of the upper line it will continue to the right end of the lower line Vertical scroll mode When the cursor reached th
19. n video file path at same time use current video file path save and replace old one When s 12h append current play video list dld2d3 dn file path at same time the current video file save and append old video list When d1d2d3 dn include more than one file path use separator set main image ESC jsd1d2d3 dn CR 027 106 s d1d2d3 dn 013 1Bh 6ah s d1d2d3 dn Odh 20h lt dn lt ffh O lt n lt ffh s 1h 2h 11h 12h Description ESC k n ASCII Format Dec Format Hex Format Description ESC m s d1d2d3 dn CR ASCII Format Dec Format Hex Format Description When s and 10h equal 10h save image file path When s 1h clear current run show image list and set new dld2d3 dn image file path When s 2h append current run show image list d1d2d3 dn image file path When s 11h clear current run show image list and set new d1d2d3 dn image file path at same time use current image file path save and replace old image file list When s 12h append current run show image list dld2d3 dn image file path at same time the current image file path save and append old image file list When d1d2d3 dn include more than one file path use separator media control ESC kn 027 107 n 1Bh 6bh n Olh lt n lt 06h When n 1h play media When n 2h pause media When n 3h paly next media When n 4h previous next media When n Sh stop media When n 6h clear current media play
20. rd The wizard has finished installing the software for 3 LineDisplay serial port emulator Click Finish to close the wizard 3 2 Initial Comport Setup Guide The default Virtual Line Display Utility will install the driver that occupies both COM 40 and COM 50 ports Users can change the COM port to any available COM PORT by using the Line Display Tools Please follow below steps to change the COM port A Find Virtual Line Display from Windows start menu and choose the LineDisplay_Tools as shown on the Fig 13 Pe LineDisplay_Tools fa Virtual Line Display ZE ee Uninstall Virtual Line Display Virtual Line Dispaly Fig 13 l Dispaly_Tool x Fort Mame Port Name New Port Name Fig 14 B Typed the new COM Port Number For example COM2 into New Port Name and click on the Rename button to change the COM port The pop up message will shown like Fig 15 please choose Continue if it correct then another pop up message as shown on Fig 16 please click OK to finish the comport change process After clicking OK you can choose if you want to reboot the system immediately or later Note Must restart the system for the change COM port to work properly Setup for LineDisplay CHANGE The port name COM is already used for other device DewicelSerialS Try Again Continue Fig 15 LineDisplay_Tools Eg Pork name rename successed infomation The com
21. rent folder click Browse piirtual Line Display Fig 3 ie Setup Virtual Line Display Select Additional Tasks Which additional tasks should be performed Select the additional tasks you would like Setup to perform while installing Virtual Line Display then click Next Additional icons Fig 4 Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for curent and updated software by looking on pour computer on the hardware installation CD or on the Windows Update Web site with pour permission Can Windows connect to Windows Update to search for software Yes this time only O Yes now and every time connect a device O No not this time Click Next to continue Back Next gt Cancel Fig 5 Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for curent and updated software by looking on pour computer on the hardware installation CD or on the Windows Update Web site with pour permission Read our privacy policy Can Windows connect to Windows Update to search for software gt Yes now and every time connect a device O No not this time Click Next to continue Fig 6 Found New Hardware Wizard Please wait while the wizard installs the software Lo LineDisplay serial port emulator p2 Setting a system restore point and backing up ald files in case your system needs to be restored
22. t TOOT Bal a PH Fig 33 5 Uninstall the Virtual Line Display Utility A Click on Virtual Line Display on the Start menu then select the Uninstall Virtual Line Display process to uninstall this utility el LineDisplay_Tools WE Virtual Line Display ig Uninstall virtual Line Display virtual Line Dispaly Fig 34 B Follow the uninstall process as shown below Virtual Line Dispaly Uninstall ae Are you sure you want to completely remove Virtual Line Dispaly and all MI a di of its compon ents Fig 35 The deleting LineDisplay service will remove your manual settings Would you like to delete service Please wait while Virtual Line Dispaly is removed from your computer Cancel Fig 37 APPENDIX 1 Commands 1 1 SYSTEM COMMAND DETAILS 1 1 1 Command type select STX 05 C nETX ASCII Format Dec Format Hex Format Description Change command type STX 05 C nETX 02 05 67 n 03 O2h O5h 43h n 03h 30h n 37h This command will change the command type and initialize the display The display emulation mode is based on CD5220H ESC POS ADM787 ADM788 UTC AEDEX EMAX mode The setting function will be saved to EEPROM Command type DSP800 Tea AEDEX ADM787 CD5220 CD7220 1 1 2 Reset EEPROM STX 05 07 n ETX ASCII Format Dec Format Hex Format Description Reset EEPROM STX 05 07 n ETX 02 05 07 n 03 02h 05h 07h n 03h This
23. the end of the range the characters that comes there after will push displayed characters forward from behind ESC Q A dld2d3d4dsdo dn CR ESC Q B dild2d3d4d5d6 dn CR Set the string display mode and write string to display ASCII Format ESC Q A d1d2d3d4d5d6 dn CR Dec Format Hex Format ESC Q B d1d2d3d4d5d6 dn CR 027 081 065 d1d2d3 dn 013 027 081 066 d1d2d3 dn 013 1Bh 51h 41h did2d3 dn ODh 1Bh 51H 42h d1d2d3 dn ODh 20h lt dn lt ffh Description Set the string display mode write to upper or lower line dl d2d3 dn l lt n lt 20 A stands for the upper line B stands for the lower line The string display mode will be cancelled and back to last mode after receive CLR or CAN ESC Q D did2d3d4d5d 6 dn CR Upper line message scroll continuously ASCII Format ESC Q D d1d2d3d4d5d6 dn CR Dec Format Hex Format Description ESC D BS ASCII Format Dec Format Hex Format ASCII Format Dec Format Hex Format Description ESC C HT 027 081 068 d1d2d3 dn 013 1Bh 51h 44h d1d2d3 dn ODh 20h lt dn lt ffh The message previously defined will scroll continuously in the horizontal direction until a new command is received Move cursor left Move cursor left ESC D 027 091 068 1Bh S5SBh 44h BS 008 08h When the current cursor is at the left end position this command operates differently depends on the display
Download Pdf Manuals
Related Search