USER`S MANUAL
Contents
1. 38 3 1 9 Setting Time Lapse If set On the camera will automatically take photos videos at the set interval Note in this mode the PIR sensor is disabled This is helpful when observing cold blooded animals like snakes or the process of flowering etc This feature can work together with Timer feature The effective value ranges from 00 00 00 to 23 59 59 Time lapse Switch OFF means the camera works all along Provided that the camera set 3 20 40 means the camera work every three hours twenty minutes forty seconds The steps are as following a In MENU press the UP or DOWN key till the parameter Time Lapse appears b Press OK key to enter into the option Press the DOWN key The value of this parameter will be changed to ON 39 c Use LEFT and RIGHT key to alter between each slot and use UP and DOWN key to change the value until the start time is 3 20 40 d Press OK key for saving setting or MENU key for canceling setting and exiting MENU Video Time PIR Sensitivity Timer Serial No Tinie eae i GED Exit gt Enter 40 amena i en MENU ERSS ON GED Exit Enter HH MM SS Note Set on Will NO PIR GEDeExit Enter 41 3 1 10 Setting PIR D time TC101G1E The PIR detecting distance is comparatively far IR LED illuminating distance is relatively close so at night or insufficien2. SMS or SMTP c Press OK key to save the current setting or MENU key for canceling setting and exiting 3 2 8 Setting Max Image No You can set the number of pictures sent via MMS The numbers are counted from entering on mode E g I choose 50 it means the camera totally sent 50 pictures until you set the parameters again a In MMS MENU Press the UP or DOWN key till the parameter Max Image No appears b Press OK key to enter into the option Press UP and DOWN key to choose 1 10 20 30 40 50 60 70 80 90 100 200 500 c Press OK key to save the current setting or MENU key for canceling setting and exiting 3 2 9 Reset config Press Yes to Restore default settings a In MMS MENU Press the UP or DOWN key till the parameter Reset config appears b Press OK key to enter into the option Press the DOWN key the value of the parameter will be change to No 65 c Press OK key to save the current setting or MENU key for canceling setting and exiting Notice TC101G1 Mobile phone send MMS to your mobile mobile phone It charge in accordance with the MMS numbers or SMS numbers You need set Manual set Phone NO E mail Phone or E mail 02 Phone or E mail 03 Option Max Image No as your requirement TC101G1E Email account send images to your email account It is charged according t6 the inter
3. DEt Enter 3 1 19 Setting Password If the system password was set the device can be protected from non users since it cannot enter the test mode without the password and thus cannot be used a In MENU Press the UP or DOWN key till the parameter Password appears b Press OK key to enter into the option Press UP and DOWN key to choose either ON or OFF 58 c Use LEFT and RIGHT key to alter between each slot and use UP and DOWN key to change the number and alphabet Select OK to confirm the changes and exit the screen MENU TV OUT Date Stamp Language Date amp Time Haan CDE GQ Enter Fo a ef i MENU ON GEDExit Enter MENU please input password E o ooo GED Exit Enter 60 3 2 MMS Menu Parameter Setting Press MENU Key for about 3 seconds you will see the MMS menu 3 2 1 Manual set a In MMS MENU Press the UP or DOWN key till the parameter Manual Set appears b Press OK key to enter into the option ask your operator for URL APN GATEWAY PORT c Press OK key to save the current setting or MENU key for canceling setting and exiting Note MMS APN and SMTP APN maybe different Please kindly remember to change it 3 2 2 Setting Phone No a In MMS MENU Press the UP or DOWN key till the parameter Phone No appears 61 b Press OK key to enter into the option then
4. 6 Setting PIR Sensitivity cccssssssssssscccsssseesanseee 31 1 3 1 8 Setting Serial NO 3 1 9 Setting Time Lapse sscsssscssssssssscsssscssescsecsssee 3 1 10 Setting PIR D time TC101G1E 3 1 11 Setting Motion Alarm TC101G1E scsese00 44 3 1 12 Setting Delay Timesseocssscccccccsessscorsssesesssscessseenees 46 3 1 13 Setting Blue LED sssssssssessssssessssnsensssssessees 48 3 1 14 Setting IR Photo sosnessveidstassnncsesscnstosscusesta 50 3 1 15 Setting TV OUT 3 1 16 Setting Date Stamp sscsscssccssssccssecsseecsnsessneecesee 53 3 1 17 Setting Language SECA RSS RTE OREA oye 3 1 18 Setting Date amp Time 0 PEER EILE 56 3 1 19 Setting Password EL PEER 3 2 MMS Menu Parameter Setting csssssssssssscecssceees 61 3 2 1 3 2 2 3 2 3 3 2 4 3 2 5 3 2 6 3 2 7 Manual set cc rsccsssscssesssceseasesessscnses TERNS 61 Setting Phone NO cssesecssssssssssssssssessessseees 61 Setting E mail Setting Phone or E mail 02 cscsssssesseee 62 Setting Phone or E mail 03 cccsscssessssssees 63 SMTP Set TCIOUGIE sesssescsrsessseeeeseereeeee 63 Setting Option 3 2 8 Setting Max Image NO cccsseseseses sseeeaservens 64 3 2 9 Reset COnfIZ 00000 EO ESE IEEE osesesesese OS 3 3 Sensible Angle and Distance Test 3 4 Mounting the Camera eesseossossosescescossessescosee TRAE 67
5. not need for any manual operations and the camera will function automatically by taking pictures or videotaping the subjects such as animals persons that enters a certain range The time interval or the record time can be set before the camera is put to work The camera will automatically turn on when subjects animals persons enters the area covered by the PIR Then it will take pictures or start videotaping once the subjects are in the range If the subjects enter the range directly the camera will be in operation immediately If the subjects leave the range of the PIR the camera would automatically shut down after a while 17 The camera will automatically send the MMS SMS SMTP TC101G1E When the photos are taken The precondition is that you set the parameters like this Mode capture Capture mode single or 3 pictures It means it won t send videos to your email or mobile phone Of course Occasionally it is unsuccessful to send the SMS MMS SMTP TC101G1E due to the network and weak signal strength of GPRS GSM 2 5 Manual Snap Under the Test mode you can use camera to take pictures as a regular digital camera by pressing SNAP button 2 6 Playback Delete and Format Pictures or Videos There are three ways to playback or delete pictures or videos 18 a 2 7 TFT LCD Display Under the test mode press the OK key The latest picture or video will be displayed Then press LEFT and RIGHT to vi
6. redundant images The effective value ranges from 00 00 00 to 01 59 59 a In MENU press the UP or DOWN key till the parameter Delay Time appears b Press OK key to enter into the option Use LEFT and RIGHT key to alter between each slot and use UP and DOWN key to change the value until the desired value appears Press OK key for saving setting or MENU key for canceling operation and exiting 46 MENU Serial No Time Lapse PIR D Time Motion Alarm PAE GD Exit GD Enter 47 3 1 13 Setting Blue LED MENU We need set the LED off in on mode in case of spooking PIR D time the game In test mode when setting the LED on you can Motion Alarm find the LED get blue when PIR detect the game There is a Delay Time waiting time of about 30 seconds LED get blue before the HEE system adjusts to on mode IR Photo a In MENU Press the UP or DOWN key till the DEt D Enter parameter Blue LED appears b Press OK key to enter into the option Press the DOWN key the value of the parameter will be change to ON c Press OK key to save the current setting or MENU key for canceling setting and exiting f i 48 49 3 1 14 Setting IR Photo The animal usually stay pass by or run from the camera g we set the menu separately Mobile photo Still photo You can set as your requirement a In MENU Press the UP or DOWN key till the p
7. when low battery and memory full message Alert Automatic text alert when it is moved TC101G1E Gravity Sensor function the Screen Rotate up and down except in the MENU interface 7 Blue backlight for keypad It is convenient for you to operate at night or insufficient light Unique structure design and G SENSOR make it easy for user to set up the menu and change the battery Laser light makes the camera focus on the optimal point by G SENSOR function Lockable and password protected 1 2 Application Trail camera for hunting e Farm and forestry security monitoring e Animal or event observations e Motion triggered security camera for home office and community Law Enforcement and Environmental Agencies Illegal Dumping Vandalism and Theft 8 All other indoor outdoor surveillance where invasion evidence needed 1 3 Camera Interface Front Light Depend Resistor E ain PIR Sensor NOTE Laser light Aim the target test mode RGB LED Red LED indicate the battery went dead on mode Green LED indicate memory SD card is full on mode Blue LED indicate PIR detect the target test mode we need close the blue LED in on mode in case of spooking the target LDR It switches the camera back and forth from day pictures color to night pictures monochromatic 10 Bottom and Switch When the switch is at ON position the camera is on the automatic
8. High Normal Low Adjustable E 2592 1944 5M PIR Sensor Multi Zone 3264 2448 8M Main PIR Sensing Angle 60 Picture Resolution 3456 2592 10M Operation Mode Day Night 3000 4000 12M Monit Auto Power Off in 5 minutes while no lens F 3 1 FOV Field of View 53 keypad controlling Dimensions 158 86 68mm 6 2 x 3 4x 2 7 inches Delay time Isec 2h programmable Net Weight 0 34KG Time Lapse on off 1 Second 24 Hours Keypad 17keys 7 _ Programmable aD 1280x720p 30fps in on off Programmable DI 720x480 l Photo Burst 1 or 3 programmable Video Resolution VGA 640x480 QVGA 320x240 72 73 MMS Phone No 1 3 Phone Numbers MMS E mail 1 3 E mail addresses ks Date time serial no temperature moon Timer stamp phase 4 characters Digits and alphabets set by Password yourself Device Serial No External DC Power Supply Interface lis 4 digits TV OUT NTSC PAL MINI USB SD CARD Slot 6V DC SIM CARD Slot Tripod slot Mounting Strap or Tripod Nail Waterproof IP54 Jk lOp Temperature 22 F to 158 F 30 C to 70 C _ Operation Humidity 59 95 Certificate FCC amp CE amp ROHS 74 Appendix Il PACKAGE CONTENTS Part name Quantity Digital camera Belt USB cable TV AV IN Cabl
9. Infrared MMS Hunting Camera USER S MANUAL For model TC101G1 and TC101G1E Contents Important Tips General Information s csccsssssssssessssssssesesererssarerer 5 11 Introd acti sccssssssssessscscccesscasacsctsisssttscctssicrseasscisissssss 5 1 2 Application csscssssssescscssssesssessssesesesssssssesnsesees 8 1 3 Camera Interface scccscscscsssesesseese f easiepeacesuntaiece 9 QUICK MAP isssiccciccsssisinssanmnnsceneniawases 2 1 Insert SD Card 2 2 Insert SIM Card scsssssscsssscsscssssssssscssnsessescssnsensnesess 15 2 3 Enter into Test Mod e sscssecsssssssssesesessssseseerees 16 2 4 Enter into ON Mode sssssscsssssssssssssssseseensseeevere 16 2 5 Manual Sirapisscssssscsnssssenssasssccsesesssesssesossonssensasavsssiees 18 2 6 Playback Delete and Format Picturesor Videos 18 2 7 Power OLE sesssssssscsssssasseascssccsssiocicsincnnnsonassNenstssisssisasiaes 20 Advanced Oper ation sesscsscosssescsssssssserssverers n21 3 1 Basic Menu Parameter Setting TE 21 3 1 1 Setting Mode ssssssssssssissssssassosossssssssssscsasssssasvsosasssisss 22 3 1 2 Setting Capture Mode esssssesesesssosseossseosesossseossees 24 3 1 3 Setting Resolution c cccccsssssscssssscesessereeeseseess 26 3 1 4 Setting Movie Size csscsscssssssesscrsssseecseeseeseenee 28 3 1 5 Setting Video Time cccscsscsssssscsssscsessseseesesseeees 29 3 1
10. LIMITED WARRANTY We take great pride in our products We always stand behind our promises Buying a our product you are covered under a TWO YEAR limited warranty We guarantee our products to be free of defects in materials and workmanship under normal use and service for a period of TWO years after registered date of purchase This warranty does not cover consumer caused damages such as misuse improper handing or installation or repairs attempted by someone other than our authorized technicians We will at our option during the warranty period repair your camera or replace it with the same or comparable original retail buyer from our authorized dealer Purchase receipt or other proof of the date of the original purchase is l required to receive warranty benefits The warranty on any replacement product provided under the original warranty 70 shall be for the remaining portion of the warranty period applicable to the original product This warranty extends solely to failures due to defect in materials or workmanship under use It dose not cover normal wear of the product If you need to return a product under this warranty please contact your dealer or our distributor 71 Appendix I TECHNICAL Video length 15sec 30sec 60sec 120sec Adjustable SPECIFICATIONS Cameratvideo first take picture then video Model Parameters Playback Zoom in out 1 4 Times Image Sensor 5 Mega pixel Color CMOS PIR sensitivity
11. Warranty Information sssccsssssccesenseses esdi 70 Appendix I Technical Specifications ssesessesessessese 72 Appendix II Package Contents esssscsescossccoescosesees 75 Important Tips The working voltage of the camera is 6 V You can either _ use AA batteries or use an external 6V DC power supply e Please load the batteries according to the indicated polarity on the cover of the battery cabinet e Please disable the write protect on the card before inserting SD card e Please insert a SD card before testing the camera Otherwise the camera will not save images and videos If no SD card is inserted or the write protect of the card is not disabled the camera will shut down automatically e It is recommended to format the SD card by the camera when used for the first time e Always close the camera before you install or remove the SD card The camera will be in the USB mode when connected to a USB port of computer In this case the SD card functions as 4 a removable disk no matter the power switch of the device is ON or OFF e In the test mode the camera will shut down automatically after 5 minutes if no key is pressed e The camera can work normally with High Performance Battery discharge current is above 1 5A We test these brands are OK such as TOSHIBA GP Ultra DURACELL Energizer NANFU General Information 1 1 Introduction The digital hunting camera is a surveillance device wor
12. a GED Exit GP Enter 54 3 1 17 Setting Language This parameter have six values English Chinese Deutsch Suomen Francais and Svenska a InMENU Press the UP or DOWN key till the parameter Language appears b Press OK key to enter into the option Press the DOWN key the value of the parameter will be change to Chinese c Press OK key to save the current setting or MENU key for canceling setting and exiting Blue LED IR Photo TV OUT Date Stamp ER GED Exit p gt Enter 55 oF MENU RE iat E fij fP De Deutsch Su suomen Fr francais Svenska Exit Se Cg 3 1 18 Setting Date amp Time Enter You can change the date and time of the device by setting this parameter when necessary after every battery change a In MENU Press the UP or DOWN key till the parameter Date amp Time appears b Press OK key to enter into the option Use LEFT and RIGHT key to alter between each slot and use UP and 56 DOWN key to change the number Select OK to confirm the changes After the setting of the date and time are all finished press the OK key to save them Please note you ll quit the parameter setting without any saving and no parameter is changed if you press the MENU key at any time only before pressing OK key IR Photo TV OUT Date Stamp Language une GRDExit Enter 37 MENU eens MM DD YYYY
13. arameter IR Photo appears b Press OK key to enter into the option Press the DOWN key the value of the parameter will be change to Still photo c Press OK key to save the current setting or MENU key for canceling setting and exiting 50 MENU PIR D time Motion Alarm Delay Time Blue LED AG GED Exit Enter MENU Mobic nae Still photo GD Exit GP Enter 51 3 1 15 Setting TV OUT This parameter also has two values NTSC and PAL a In MENU Press the UP or DOWN key till the parameter TV OUT appears b Press OK key to enter into the option Press the DOWN key the value of the parameter will be change to PAL c Press OK key to save the current setting or MENU key for canceling setting and exiting MENU Motion Alarm Delay Time Blue LED IR Photo ae GD Exit Gp Enter a 52 3 1 16 Setting Date stamp If you want the time to be stamped in the pictures and video clips when the picture or video was taken you can choose the time stamp option The default value is ON a In MENU Press the UP or DOWN key until Date Stamp appears b Press OK key to enter into the option Press the UP key the value of the parameter will be change to OFF c Press OK key to save the current setting or MENU key for canceling setting and exiting 53 MENU Blue LED IR Photo TV OUT GED Exit GP Enter aetn
14. e Warranty Card Instruction Manual
15. ew While you are viewing images and videos Press the MUNU the Delete and Format will be displayed on the LCD Del Image One will only delete the current image or video Del Image All will delete all the images and videos Choose what you would like to delete and Press the OK key you will be asked to confirm Press the OK key to delete or press the MENU key to cancel and exit b Computer You can take the SD card out of the camera and use a card reader to view or delete the pictures and videos Or you can connect the camera directly to your computer in which case the camera works as a card reader 19 c TV or Picture Viewer such as a digital picture frame You can also connect the camera to a TV or other picture viewer to view or delete the pictures or videos Note that the stand alone operations of playback and deleting can only be done in the TEST mode 2 7 Power off Just Hold down the power key for 3 5s Or auto power off in 5 minutes if no keypad input Please note that even in the OFF mode the camera still consumes certain power at uA level Therefore be sure to take the battery out of the battery cabinet if the camera will not be used for a long time 20 Advanced Operations After you are familiar with the basic operations of the camera you are now ready for advanced operations The advanced operations in this section are very similar to the basic operations only the options and parameter
16. igher temperature leads to lower sensitivity Therefore it is suggested to set a higher sensitivity for high temperature environment At the same time High indicate the detecting distance is about 0 20M normal is about 0 12M Low is about 0 8M The following shows you how to set the sensitivity by using the shortcut key 31 a In MENU press the UP or DOWN key till the parameter PIR Sensitivity appears b Press OK key to enter into the option Piress the DOWN key The value of this parameter will be changed to Normal c Press OK key for saving setting or MENU key for canceling setting and exiting MENU Capture Mode Resolution Movie Size Video Time GDExit Gap Enter 32 MENU as Normal Low GED Exit GRP Enter 3 1 7 Setting Timer Select On if you only want the camera to work within a specified time period every day In the rest of the time the device is shut off The value of the hour ranges from 0 to 23 and the minute ranges from 0 to 59 Timer Switch OFF means the camera works all along For instance if the starting time is set at 13 14 and the ending time at 5 20 the camera will function from13 14 the current day to 5 20 the next day Outside the time period the 33 camera will not be triggered or take photos videos This feature can be used together with Time Lapse feature The steps are as following a In MENU pres
17. infrared shooting mode When the switch is moved to the TEST position you can set parameters or test different functions The camera provides the following connections for external device USB port SD card slot SIM Card slot TV out jack tripod slot and external DC power in jack 11 12 p Battery To supply power for the device it is recommended to use eight new high performance alkaline AA batteries or low self leakage NI MH Nickel Metal hydride rechargeable AA batteries The discharge current is above 1 5A We test these brands are OK such as TOSHIBA GP Ultra DURACELL Energizer NANFU According to the feature which battery voltage power supply will rebound after the battery open circuit for a period of time we developed 3TPS Take turns to power supply technology It means the battery life can be extended Our hunting camera is equipped with two group cells firstly they l separately supply power gradually the battery is very low When the voltage of one group drops to a certain value while the other group cell still have higher battery voltage 3TPS technology can realize the function which A B two 13 cells automatically switch to supply power Thereby the battery is fully utilized Quick Start 2 1 Insert SD Card Before inserting SD card into the card slot please make sure the writing protect switch on the side of the SD card is off NOT in the Lock po
18. input your the phone No 3 2 3 Setting E mail a In MMS MENU Press the UP or DOWN key till the parameter E mail appears b Press OK key to enter into the option then input your E mail 3 2 4 Setting Phone or E mail 02 a In MMS MENU Press the UP or DOWN key till the parameter Phone or E mail 02 appears b Press OK key to enter into the option then input your Phone or E mail 62 3 2 5 Setting Phone or E mail 03 a In MMS MENU Press the UP or DOWN key till the parameter Phone or E mail 03 appears b Press OK key to enter into the option then input your Phone or E mail 3 2 6 SMTP set TC101G1E a In MMS MENU Press the UP or DOWN key till the parameter SMTP Set appears b Press OK key to enter into the option ask your operator for SMTP SERVER SMTP PORT USER NAME SENDER MAIL SENDER PASSWORD 24 characters letters or numbers RECIPIENT MAIL c Press OK key to save the current setting or MENU key for canceling setting and exiting 63 3 2 7 Setting Option l The default setting is MMS You can freely choose off MMS SMS or SMTP TC101G1E MMS is to send Pictures while SMS is text messages Serial No and photo name only SMTP means Email account send images to your email account a In MMS MENU Press the UP or DOWN key till the parameter Option appears b Press OK key to enter into the option Press UP and DOWN key to choose Off MMS
19. king automatically It can be triggered by sudden change of ambient temperature caused by moving game in a region of interest which is detected by a highly sensitive Passive Infra Red PIR senor and then take pictures or video clips 5 automatically Then it can send the pictures instantly to your mobile device email via GSM GPRS network The images can be sent from one Email account to the other Email account via SMTP TC101GIE You ll be alerted just when something has happened At sunrise the unit begins to take color photos and videos until there is insufficient light dusk when it begins to take infrared monochrome photos and videos Features Simple to use well designed for portability and usefulness All parameters can be set on the camera it is more convenient than via PC MMS SMS SMTP TC101G1E Impressively quick trigger time 1 0 second Supports up to 32 GB SD Card Ultra low standby current 0 2mA Extremely long in field life in standby mode up to 6 months 8x AA batteries 12MP resolution 2 7 TFT LCD Display PIR Sensing Distance 65ft 20m When you set the PIR D time ON It means the PIR detecting distance is about 0 8m during the time you set Other times it is decided by the PIR Sensitivity TC101G1E 33pcs IR LEDs 850nm for flash range as far as 65 feet 20m No glow model 940nm has 49 feet 15m flash range Audio on Video Yes Notice the user by message
20. net flow You need set the APN in Manual set SMTP Set SMTP SERVER SMTP PORT USER NAME SENDER MAIL SENDER PASSWORD Max 12 characters letters or numbers RECIPIENT MAIL and set Option in Manual set as SMTP 66 3 3 Sensible Angle and Distance Test If you want to know whether the camera can detect a certain spot you can test according to the following procedures a Switch the camera to the Test mode b Make movements ee a certain spot in front of the camera If the PIR detect Blue LED blinks it indicates that position can be sensed Otherwise that place is out of the sensing area 3 4 Mounting the Camera When use the camera in outdoor environment such as hunting or monitoring the living habits of wild animals you need to mount the device on a certain place properly To get the optimal picture quality the recommended distance is 3 5m from the tree to the target monitoring area and recommended height from the ground is 1 5 2 meters Adjust the viewing angel properly view angle of this camera is 53 f 67 eee 13 9m Fov 53 f are length There are two ways to mount the camera using a band shaped belt bottom screw a Using the belt To use the belt to fix the camera on a tree is illustrated in the following Fig Take the belt toes to go through the two back holes of the camera At the end tie 68 the two toes to the tree to finish fixing b Using bottom screw 69 TWO YEAR
21. s of the camera are explained in more details Press MENU key to enter exit the menu press 4 V to move the marker and press OK to confirm the change Always remember press OK to save the change Otherwise you will lose your new setting 3 1 Basic Menu Parameter Setting In order to do the parameter settings you must enter the TEST mode firstly Parameter settings start by pressing the MENU key in the TEST mode After you enter the Test mode some suggestive information will be shown on the LCD Press the UP or DOWN key to enter the previous or next menu the UP key for the previous 21 menu and DOWN key for the next menu Press OK key to save the current setting or MENU key for canceling the setting and exiting After pressing OK key the selected value will be no more highlighted 3 1 1 Setting Mode There are two modes for the camera the Capture mode and the Movie mode a In MENU press the UP or DOWN key till the parameter Mode appears b Press OK key to enter into the option press the DOWN key the value of this parameter will be changed to Movie c Press OK key for saving setting of MENU key for canceling setting and exiting 22 Capture Mode Resolution Movie Size Video Time SD Exit MENU 23 GE Enter 3 1 2 Setting Capture Mode This parameter affects the number of pictures taken for each triggering in
22. s the UP or DOWN key till the parameter Timer appears b Press OK key to enter into the option Press the DOWN key The value of this parameter will be changed to ON c Use LEFT and RIGHT key to alter between each slot and use UP and DOWN key to change the value until the start time changes to 13 14 and the stop time changes to 5 20 d Press OK key for saving setting or MENU key for canceling setting and exiting 34 MENU Resolution Movie Size Video Time PIR Sensitivity ewe GDExit Enter MENU HH MM HH MM CO oOo GD Exit Enter 3 1 8 Setting Serial No Setting a serial number can print on the photo and pointing out the photo where it is filmed When turned on the serial number will automatically appear with the photo s time stamp You can use the combination of digits to record the location in the photos This helps multi camera users identify the location when reviewing the photos a In MENU press the UP or DOWN key till the parameter Serial No appears 36 b Press OK key to enter into the option Press the DOWN key The value of this parameter will be changed to ON c Use LEFT and RIGHT key to alter between each slot and use UP and DOWN key to change the number d Press OK key for saving setting or MENU key for canceling setting and exiting MENU Movie Size Video Time PIR Sensitivity Timer Sean RDeExit Genter 37
23. sition The supported memory 14 capacity is up to 32 GB If you use a card capable of above 32GB make sure you test it before putting the camera in use CAUTION ALWAYS CLOSE THE CAMERA BEFORE YOU INSTALL OR REMOVE THE SD CARD 2 2 Insert SIM Card A SIM card is needed from a Mobile Phone Network Operator MPNO Make sure they provide Multimedia Messaging Service MMS 15 2 3 Enter into Test Mode In the TEST mode you should set the necessary operational parameters switch to the ON mode Then the device starts monitoring automatically Under the TEST mode you just need to aim at the object and press the SNAP key A Second later you ll get a picture saved in the SD card The number of pictures and video clips at the bottom of the LCD will decrease by one Press the OK key to review playback photos videos on the LCD screen or a connected TV monitor Use UP and down key to Zoom in out left and right to switch the picture There is another key MENU on the keypad that allows you to program the camera to work the way you want 2 4 Enter into ON Mode Automatic Infrared Shooting Mode 16 Moving the switch to ON position would set the device in the Automatic Infrared Shooting Mode There is a waiting time of about 30 seconds LED get blue before the system adjusts to this mode then the camera can start taking pictures by infrared inducement Once the device is in this mode there would be
24. t light we can fix the PIR detecting is about 0 8m in case of taking useless photos When you set the PIR D time ON It means the PIR detecting distance is about 0 8m during the time you set Other times it is decided by the PIR Sensitivity E g You set PIR D time is ON HH MM HH MM is 18 00 6 00 PIR sensitivity is high It means the PIR distance is about 0 8m from 18 00 to 6 00 other times it is about 0 20M 42 MENU PIR Sensitivity Timer Serial No Time Lapse Heenan GD Exit GD Enter 43 3 1 11 Setting Motion Alarm TC101G1E When the camera was moved in the angle scope 90 270 your phone will receive the message MOBILE ALERTS a InMENU press the UP or DOWN key till the parameter Motion Alarm appears b Press OK key to enter into the option Press the DOWN key The value of this parameter will be changed to ON c Press OK key for saving setting or MENU key for canceling operation and exiting 44 Timer Serial No Time Lapse PIR D time GED Exit 45 GD Enter 3 1 12 Setting Delay Time Select the length of time that the camera will wait from when the last picture was taken and written in the SD card until it responds to any new triggers from the PIR sensor During the selected interval the camera will not take pictures videos This prevents the sD card from filling up with too many
25. the Up or DOWN key till the parameter Movie Size appears b Press OK key to enter into the option Press the DOWN key the value of the parameter will be change to 320 240 c Press OK key to save the current setting or MENU key for canceling setting and exiting MENU Capture Mode Resolution Video Time SD Exit Ga Enter 28 MENU HD 1280 720 D1 720 480 320 320 240 GD Exit Enter 3 1 5 Setting Video Time This parameter has four values 15sec 30sec 60sec 120sec The default value is 15 seconds a In MENU press the UP or DOWN key till the parameter Video Time appears b Press OK key to enter into the option Press the DOWN key till the value change to 30 Sec c Press OK key for saving setting or MENU key for canceling operation and exiting 29 MENU Capture Mode Resolution Movie Size PIR Sensitivity GD Exit Gp Enter 30 3 1 6 Setting PIR Sensitivity This parameter defines the sensitivity of the PIR The higher degree indicate that it is more easily to be triggered by motion taking more pictures or recording more videos It is recommend to use high sensitivity in room or environment with little interferenc and to use lower sensitivity for outdoor or environment with lots of interference like hot wind smoke near window etc Furthermore the sensitivity of the PIR is strongly related to the temperature H
26. the camera mode It has three values single Camera Video 3 pictures It default value is single The following shows you how to set shooting number as Camerat Video provide that the previous value is single in MENU a In MENU press the UP or DOWN key till the parameter Capture Mode appears b Press OK key to enter into the option press the DOWN key the value of this parameter will be changed to Camerat Video 7 c Press OK key for saving setting or MENU key for canceling setting and exiting 24 MENU Resolution Movie Size Video Time GED Exit GP Enter MENU Camera Video 3 pictures GED Exit gt Enter 25 3 1 3 Setting Resolution This parameter has four values 5M 2592 1944 8M 3264 2448 10M 3456 2592 12M 4000 3000 The default value is 8M a In MENU Press the UP or DOWN key till the parameter Resolution appears b Press OK key to enter into the option Press the UP key the value will be change to 10M the value 10M is highlighted c Press OK key to save the current setting or MENU key for canceling the setting and exiting 26 MENU Mode Capture Mode Movie Size Video Time GED Exit gt Enter 27 3 1 4 Setting Movie Size This parameter has four values 1280 720 720 480 640 480 and 320 240 The default value is 640 480 a In MENU press
Download Pdf Manuals
Related Search