Home

PDI-P14T - PDi Communication Systems

Contents

1. aa AS Internal Speaker Enable Balance Minimum Volume Maximum Volume Power on Volume Internal Speaker Enable HDMI1 Audio Port Android Audio Port Composite Sound Mode Volume Leveling Headphone Sound Mode Position A Y Exit SETUP OR OK PDi Communication Systems Inc 0 100 100 Last e HDMI 1 Android L R Stereo Next gt LP Composite Video Component HDMI 1 Module Android PC ANALOG FM RADIO USB Media ELLE Position A Y Exit SETUP OR OK _ Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DX Document Number PD196 251R2 PDI P14T User Manual HDMI Audio Ports The HDMI1 Port has three settings HDMI 1 PC and Component A device connected to the HDMI ports can receive audio from one of these sources 1 Inthe Sound menu press CHA CH to highlight HDMI1 2 Press VOL VOL to choose between HDMI and PC or Component 3 Press SETUP to return to previous menu The second audio port can be between Component Android or PC Composite Sound Mode The settings are L R L L and R R 1 Inthe Sound menu press CHA CH to highlight Composite Sound Mode 2 Press VOL lt VOL to choose between settings 3 Press SETUP to return to previous menu Volume Leveling The settings can be adjusted from 50 to 100 Headphone Sound Mode The earphone jack
2. Connect the Android Service Port to your PC Transfer the apk file to the Android sd card under Downloads Select or click the File Explorer app Select or click the apk file to install If you get an Install block warning select or click on the Settings button then 1 Press the ENTER button or click on the first line to allow installation of unknown applications 2 Select or click the OK button in the warning box that appears The box on the right side of the Unknown sources line should be checked 3 Select or click the Install button at the bottom of the screen e When the installation is finished select or click the Open or Done button at the bottom of the screen e Right click or press the BACK button to exit PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 30 of 56 Application from the PDI app store PDi store is under development and not available yet This section will be updated once it is ready Media formats supported by Android CS ES EEN Applications for the Administrator Settings ES To enter the Settings menu go into the All Apps Ex screen and touch the Settings app After confirming your security code you will enter the Settings screen where you can adjust network sound and account settings among many others Follow the screen instructions to person
3. Note When you select one of the three colors to adjust the other two will turn gray 7 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear UA A SS Noise Reduction Additional picture improvement may be achieved by enabling the Noise Reduction function found in the Picture menu 1 Press the SETUP button to display the SETUP MODE menu 2 Select the Picture menu item 3 Press the CHA CHY buttons to highlight the Noise Reduction 4 Usethe VOL VOL buttons to alternate Enable or Disable 5 Press the SETUP button to return to the previous menu Sound The Sound menu allows precise adjustment of several parameters 1 Press the SETUP button to display the SETUP MODE menu 2 Press the CHA CHY buttons to highlight the Sound menu item 3 Use the VOL VOL to display the Sound Menu Balance This will adjust the volume balance of the left and right speakers 1 In Sound menu press the CHA CHY to select Balance 2 Press the VOL VOL to select desired speaker balance from L50 R50 with O being equal balance 3 Press SETUP to return to the preceding menu Minimum Volume Sets the minimum volume level the TV can reach Setting this to any value other than O guarantees that some level of sound will always be heard when the TV is operating 4 In Sound menu press the CHA CHY to select Minimum Volume 5 Press the VOL VOL to select your
4. This warranty gives specific legal rights and you may also have other rights which vary from state to state PDi s liability under this warranty is limited to repair or replacement of defective products and parts as provided above PDi shall not be liable for incidental or consequential damages The warranty contained herein s in lieu of all other expressed or implied warranties including any implied warranty of merchantability or fitness for any particular purpose PDi neither assumes nor authorizes any person to assume on its behalf any other obligation or liability This document supercedes any and all previous revisions or versions of PDi s warranty Some states do not allow the exclusion of limitation of incidental or consequential damages or a disclaimer of warranties implied by law so the above limitation or exclusion may not apply The information and technical data in this manual is believed accurate but is not warranted and is subject to change without notice or obligation PD and PDi Tab are registered trademarks of PDi Communication Systems Inc Copyright O 2004 2014 by PDi Communication Systems Inc All rights reserved Google Android and other related trademarks are property of Google Inc A list of Google trademarks is available at http www google com permissions quidelines html All other marks and trademarks are properties of their respective owners PDi Communication Systems Inc 40 Greenwood Lan
5. ou d crit l int rieur Droits d auteur 2009 2014 par PDi Communication Systems Inc Tous droits r serv s Marques de commerce Tous les noms de marques et noms de produits mentionn s dans ce manuel sont des marques de commerce des marques d pos es ou des noms commerciaux de leurs d tenteurs respectifs PDi et Better Solutions Within Reach sont des marques d pos es de PDi Communication Systems Inc Springboro Ohio fabriqu sous licence de Dolby Laboratories Dolby et le symbole double D sont des marques d pos es de Dolby Laboratories Underwriters Laboratories Le mod le de t l vision LCD HDTVTV PDI P14T de qualit hospitali re est un appareil sp cialis et doit tre install selon les sp cifications du code national de l lectricit Cet appareil a t test quant la s curit et homologu par Underwriters Laboratories comme un produit adapt pour une utilisation dans les tablissements de sant aux tats Unis et au Canada C US LISTED PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 ls 4 O 11 PDI P14T User Manual Page 4 of 56 IMPORTANT SAFETY INSTRUCTIONS THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES READ AND FOLLOW THE SAFETY INSTRUCTIONS BEFORE ATTEMPTING THIS INSTALLATION Read these instructions All the safety and o
6. Bad Language Sex and Violence Scenes TV 14 Parents Strongly Unsuitable for children under 14 may contain Strong a Dialog Bad Language Sex and Violence Scenes TV MA Mature Audience Only Adults only may contain Strong Dialog Bad Language DEN Sex and Violence Scenes TV G General Audience Considered suitable for all audiences children may watch unattended MPAA Rating Most televised movies are now rated MPAA Rating selectively allows the TV to only present movie content that is unblocked per its preset level SA 6 7 8 Note rated MPAA Rating From the Parental Control menu enter the MPAA Rating menu Press CH A or CH Y to highlight a particular MPAA Rating Press VOL or VOL to select Blocked or Unblocked Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Parental Control will automatically block any category that is for older audiences For example if you block the PG 13 category then R NC 17 and X will be automatically blocked also No Rating Position Y Exit SETUP or OK PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Change Password The Parental Control access password can be changed using this menu Note The factory default password that is programmed into the TV is 0000 Block Aux Sources Like TV program
7. Stereo Next lt Document Number PD196 251R2 PDI P14T User Manual Page 13 of 56 Channels The Channels menu allows you to program different signal sources to either disable or select from three Service Levels Free Basic or Premium and to add or delete individual channels It also allows you to block channels TV programs movies and auxiliary sources that can be input to the TV Each Service Level contains a different channel map Signal he 5 6 7 N Press the SETUP button on the remote control Press CHA or CHY to highlight Channels Press VOL to enter the Channels sub menu Four different tuning types are available depending upon the healthcare facility s signal type Selection of the correct signal type is required for the TV to recognize all possible channels and before any channel programming can begin Enter the Channels menu Press CHA or CHY to highlight Signal Press VOL to select Air Cable STD Cable IRC or Cable HRC ote Most hospitals use the Cable STD signal style Auto Program The TV automatically scans each available channel for activity Channels that display activity are memorized into the selected Service Level ae ee Analog Only TV searches for analog channels only Digital Only TV searches for digital channels only Analog and Digital TV searches for both analog and digital channels Interleave A D In the order of channel number regardless of the system All
8. 5664 DA Document Number PD196 251R2 Copy Service Level Allows the copy of one service level s channels to another 1 2 3 4 5 PDI P14T User Manual Page 15 of 56 In the Channels menu Press CHA CH Y to highlight Copy Service Level Press VOLP to select Press CHA to set the From Service Level Press CH to set the TO Service Level Press VOL to copy the Service Level A confirmation screen will appear Press CHA to proceed Press CHY or SETUP to return to the previous menu Note After a Service Level is copied the TV returns to the Copy Service Level menu If the To Service Level has been set to active in the Service Level setting see Service Levels on page 4 TV programming will appear Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Copy Service Level Parental Control Parental Control allows you to block channels TV shows movies and devices that are connected to the P14W 1 2 In the Channels menu Press CHA CH to highlight Parental Control From the Parental Control menu press VOL to enter the TV Rating menu Press CHY to move to one of the six age based categories Press VOL or VOL to cycle through the sub ratings ALL FV V S L or D or exit out of the sub categories in that category See page 14 for rating guides Note The U or B unblocked or blocked will turn red when it is highlighted Press
9. Athen D Digital channels are displayed after all analog channels From the Channels menu select Auto Program In the Auto Program menu press the VOL button to select Mode Press VOL to set the scope of channel scanning Press the CH Y button to select the Channel Sequence menu item Press lt VOLP to set the Channel Sequence in which the channels are displayed after searching Press the CHA CH Y button to select the Service Level you wish to program The menu displays the current programming status of each level as either Programmed or Blank Press the VOL to choose the service level Note A Programmed service level can also be reprogrammed if desired A confirmation menu will appear before proceeding Press Yes A to select YES and start auto programming The TV will now search all available channels with an on screen progress percentage displayed Once complete press the SETUP button to return to normal TV viewing Note Any tuning mode that includes Digital channels will require several minutes to complete the auto programming Auto Program Confirm Auto Program _ 5 Mode a a ee _ Digital Only Current Service Level Channel Sequence Interleave A D Sapiro SC D ee ee E Add l Digital Signal Cable STD Free Programmed P Basic Blank b a Premium Blank a Auto Program u Confirmation Position 4 Y Exit SETUP Exit SETUP OR OK PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 4
10. MB Watching a two hour streaming movie from Netilix 2 GB at 640 x 480 resolution iTunes Amazon Hulu etc Listening to Pandora for one hour 56 25 MB assuming 128 Kbps streaming rate A typical number of user supported scenario is given below Note that the actual numbers would depend on many other factors including but not limited to actual network bandwidth network configuration other users on the network other background applications taking up bandwidth media video content etc Q What is the typical band width offered by standard connectivity technologies A The following table covers two standard connectivity technologies offered by the P14T Network 802 11n 600Mbps aka 120 1200 concurrent 500 kbps 360p H 264 Bandwidth wifi users baseline 5 Mbps 1080p H 264 High 802 3z Gigabit Ethernet 200 2000 per device for YouTube aka gigE concurrent users Video Q Why does the screen zoom in sometimes when accessing the log in screen A Before going to sleep the Android disconnects the touch screen The touch screen is enabled when the Android wakes up The screen zoom in when accessing the log screen is the effect of reconnecting the touch screen This is normal Q Why does the browser crash on certain websites Youtube etc A Due to a bug in the P14T Ice cream Sandwich version the browser or other applications may crash while streaming videos This bug has been fixed in the P14T Jelly Bean version
11. PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 53 of 56 Android Troubleshooting Tips Many problems can be solved by just rebooting the Android To reboot the Android touch and hold the TV power button bottom right for 8 10 seconds The power button must turn back to green after turning to red Symptom Check KEEP GETTING PLEASE WAIT MESSAGE WHEN SWITCHING TO ANDROID REBOOT THE ANDROID THE TOUCH SCREEN DOES NOT SEEM TO RESPOND REBOOT THE ANDROID CHECK INTERNET CONNECTION SETUP SEE SECTION CONNOT CONNECT TO INTERNET SETTINGS gt WIRELESS 8 NETWORKS FOR MORE INFORMATION THE PDI TAB NEEDS AN ACTIVE INTERNET CONNECTION TO GET THE CORRECT TIME AND DATE IN SOME CASES EVEN WITH AN ACTIVE INTERNET CONNECTION THE NETWORK MAY BE CONFIGURED DEVICE SHOWS THE TIME JANUARY 1 TO BLOCK ACCESS TO EXTERNAL TIME SERVERS AS 1970 AROUND 12AM A SECURITY PRECAUTION ONCE CONNECTED THE DATE AND NUMBER OF MINUTES AFTER THE HOUR SHOULD BE CORRECT IF ACCESS TO A TIME SERVER IS PERMITTED IT IS POSSIBLE TO MANUALLY SET THE TIME THROUGH THE SETTINGS APP BY DEFAULT THE PDI TAB WILL SET THE TIME TO EASTERN STANDARD TIME EST OR GREENWICH MEAN TIME GMT THE PDI TAB LACKS THE NECESSARY GPS AND P14T DOES NOT AUTOMATICALLY SHOW CELLULAR RADIO TECHNOLOGY THAT IS TYPICALLY THE CORRECT TIME ZONE USED TO ESTABLISH A LOCA
12. Page 39 of 56 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Backup amp Reset wf isis he SE e Removes user data from device REA cole e Restore devices to original factory settings Note To reset the device to original factory settings you must check the Erase SD Card option gt CE 2 o m Accounts amp synt 4 Location services NW Eccurity O Language amp npu Evel D Date amp time System Juror Date amp Time Location anion gt gt e Enable disable automatic setting of date and time Security zone LA Language amp input e Set time and date manually Domaines e Settime zone manually FAR Note Default time zone is Greenwich or Eastern Time PRESSE RES Zones depending on firmware version EE E 7 Over the Air OTA About device Accessibility se e Display and manage accessibility services Accounts amp sync DS installed eegenen TZ e Enable disable large text EE e Change the delay for long press presently short normes e Permit deny the installation of web scripts not Duda doi allowed by default Date time Developer options 5 Over the Air OTA About device PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Page 40 of 56 Document Number PD196 251R2 PDI P14T User Manual Pag
13. The administrative apps requiring a special password to access are as follows which apps require administrative access P14T File Explorer Provide access to files on the device that are not accessible from the Downloads app and also allow the administrator to install 3 party apps Ghost Commander An enhanced File Explorer app for administrative use that permits transferring of files not only locally but also from FTP SFTP Windows shares and productions installed SD Card settings Allows the administrator to modify the setup of the P14T The service apps e g apps PDi service personnel would use or would direct the administrator to use at their instruction App aLogcat Provides access to the Android logcat which is Android s logging system for messages from the apps and services installed on the device This is a useful app in helping to troubleshoot problems that may occur with the P14T when used in conjunction with support from PDI service department personnel Terminal Emulator Provides a command line shell for running diagnostic applications and scripts Installing Android Applications Android applications packaged as apk files that are compatible with the P14Tcan be installed Depending on where the applications are stored the following are the steps to install the application Application installables apk files from third party publishers non PDi store apps Download the apk from the internet site to your PC
14. be chosen Field Powered Hours from this menu USB Cloning and FW Update Cloning allows quick programming of a TV from a USB Flash Drive The operation involves first downloading setup information from a programmed host TV to an USB Flash Drive and then uploading the setup information to another TV Cloning can also be used to re program a programmed TV From this menu you can restore settings save settings to USB upload firmware upload boot code and see firmware information Restore Settings to TV Restore Settings to TV 1 Enter the USB Cloning and FW Update menu Source MONCI ETEN 2 Press VOL to see Source Model 3 Press Yes A to restore settings TV will restart when complete Position Y PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 PDI P14T User Manual Page 23 of 56 Save Settings to USB 1 With TV on insert a blank USB thumb drive into the cloning port Restore Settings to TV 2 Enter the System menu Save Settings to USB 3 Press CHA or CH Y to highlight USB Cloning and FW Update a Upload Firmware to TV 4 Press VOLP to display the Save Settings to USB menu Upload Boot Code to TV 5 Press CHA or CH Y to highlight Save Settings to USB a Information 6 Press VOLP to save 7 Press the SETUP button to return to the previous menu Upload Boot Code to TV Bootstrap firmware code is updateable if ne
15. choose the wifi network that you want to use for all the slave device there will be separate instructions if there are multiple wifi networks to be configured 3 Install apps if you test them then make sure you delete the data associated with those app e g if you are using Pandora your login password also gets copied in the clone file and you may not want this Before creating the master clone file make sure you Clear Data Go to Settings gt Apps gt Touch the app name from the Apps whose data you would not want to clone 4 Delete any unwanted apps that you may have installed but not want to clone and data from say downloads folder movies music etc that you do not want to be cloned 5 Cloning of widget icons on the Home Screen is not supported currently So you may not see your widgets icons cloned to the slave devices 6 Avoid configuring the same device as both slave master PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 51 of 56 Q How does the device monitor for Malware A Default Android comes with a lot of inbuilt security features like non writeable system partition that holds the core android software user level applications have access permissions granted by the user application run under the Dalvik Virtual Machine and have limited access to system level resources etc We have pr
16. comes in and touches the I m a new user button Q Is the device encrypted A Android comes with encryption function where you can encrypt the full device will take an hour to encrypt normally would be on a per user basis with a numeric PIN password and decrypt it each time you power it on Currently we have disabled it on the P14Tab The Encrypt device is disabled under the settings gt Security The P14Tab would normally be physically secured and cannot be easily stolen displaced so unlike phones or tablets it would be difficult to open the device and retrieve the data from inside it without anyone knowing about it Also Full device encryption may be too cumbersome for changing users patients So we would have to have encrypted data on a per app basis For example the apps that deal with patient information should be storing encrypted data on the device for additional confidentiality Q Can Mobile Device Management applications like Mobilelron be loaded on the device A PDi Tab conforms to standard Android Interface Version 4 0 4 Ice Cream Sandwich API Level 15 Note that compatibility certification is pending So any app written to that interface and not requiring any hardware feature not supported by the PDi Tab could be loaded on the Pdi Tab A quick way to check this or any app would be to install the app on the device in the user space and check whether it works as intended Q Do Master IP addresses
17. importantes dans la documentation accompagnant cet appareil Danger chute d objets AVERTISSEMENT Afin d viter toute blessure cet appareil doit tre solidement fix au sol mur conform ment aux instructions d installation Les t l visions peuvent pr senter un risque de heurt lorsqu elles sont mont es en position lev e Utiliser uniquement des supports de montage des bras de support et le mat riel appropri de PDi afin d assurer que la t l vision ne tombe pas de sa position de montage Le non respect de ces instructions peut causer des blessures ou la mort Pluie et humidit AVERTISSEMENT Afin d viter les risques d incendie ou de choc lectrique NE PAS exposer cette t l vision la pluie ou l humidit ou l utiliser dans un endroit humide Environnement d oxyg ne AVERTISSEMENT Ne pas utiliser dans une tente oxyg ne ou chambre oxyg ne Une telle utilisation peut causer un risque d incendie Remarque l intention des installateurs de cable TV Le but de ce rappel est d attirer l attention de l installateur de c ble TV sur l article 820 40 du Code national de l lectricit Le code fournit des directives pour une mise la terre appropri e et pr cise que le c ble de mise la terre doit tre connect au syst me de mise la terre du b timent aussi pr s que possible du point d entr e du c ble dans le mesure du possible Les installations canadiennes doivent tre correct
18. overall life of the P14 Tab PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 44 of 56 AM Android Cloning OTTA Cloning the android portion of the TV must be performed separately Thu 13 Feb 2014 1 From the android home screen touch the All Apps icon ERB 2 Inthe All Apps screen touch the Clone icon You may be prompted for a security code by the E security application er Ae 0706 E DigiClock Sett clone F 1 CT vu Ghost Comma Music Terminal Erm Timer 3 Enter the security code and touch the unlock button For default password see Appendix PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 Copy Settings from Android Master Configuration Instructions You will now have the Master cloning screen 4 To use this device to generate clone data touch Master 5 Follow Master setup information by sliding the screens and entering information Create Master Device If you are not ready to clone at this time you can come back to this screen once you are ready to clone your changes If you wish to create a master device now then slide the screen or use tabs at the top of the screen Note The checking options are disabled in this screen STEP 2 Choose file and s
19. sound can be used with either a mono single ear or stereo dual ear style 1 Inthe Sound menu press CHA CH to highlight Headphone Sound Mode 2 Press VOL lt VOL to choose between settings 3 Press SETUP to return to previous menu PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Balance Minimum Volume Maximum Volume Power on Volume Internal Speaker Enable HDMI1 Audio Port Android Audio Port Composite Sound Mode Volume Leveling Headphone Sound Mode Position A Y Exit SETUP OR OK Balance Minimum Volume Maximum Volume Power on Volume Internal Speaker Enable HDMI1 Audio Port Android Audio Port Composite Sound Mode Volume Leveling Headphone Sound Mode Position A Y Exit SETUP OR OK Page 12 of 56 0 100 100 Last gt HDMI 1 Android L R gt Stereo Next gt 0 100 100 Last Leg HDMI 1 Android L R gt Stereo Next gt Volume Leveling TV Composite Video Component HDMI 1 Module Android PC ANALOG FM RADIO USB MEDIA Position A V Exit SETUP OR OK Balance Minimum Volume Maximum Volume Power on Volume Internal Speaker Enable HDMI1 Audio Port Android Audio Port Composite Sound Mode Volume Leveling Headphone Sound Mode Position V Exit SETUP OR OK 100 100 100 100 100 100 100 100 Next 4 0 100 100 Last gt HDMI 1 Android L R lo
20. 0 Date amp time AUTOMATION CONFIGURATION es W Accessibility Automate Updates Tap box to Mare Cegiem siartr Developer options ACTIONS Additional system updates CO About device Once configured tap the Additional system updates to PDi Communication Systems Inc OTA System have the P14T unit check for download and if applicable apply the OTA update Checking Upgrade d If there is an update available the popup will say that there is a new release and provide the version information The size PDi Communication Systems Inc OTA System of the update typically will be in the hundreds of megabytes MiB range If the size of the update is 8 00 KB this is a Have new release placeholder size that indicates the configuration suffix was Version SU8 20140212 Pete ihe ce aa configured correctly but the archive suffix was not configured ii eerie successfully and or the OTA file is not available Press the upgrade button to have the update applied to the Upgrade system During the process of updating the system the popup will change its contents to reflect the progress of the update The popup will indicate that it is downloading the update package verifying the update and shutting down among other steps PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 43 of 56 PDi Communication Systems Inc O
21. 1 Enter the Features menu Digital Mode Time Setup gt 2 Press CHA or CHY to highlight Power on Caption Mode a Channel Up Power Off Disabled 3 Press VOL lt or VOL to select Last or Off Channel To Other Sources Enabled 4 Press the SETUP button to return to the previous menu To EE aoe exit press SETUP until the programming menus disappear a Eon Puen Pare E Position Y Exit SETUP OR OK Next lt gt Auto Power On Lock The TV will turn on and stay on whenever electrical power is applied to the set The feature is useful for controlling the TV from a wall switch or preventing the TV from being turned off by the TV power button or the remote control 1 Enter the Features menu 2 Press CHA or CHY to highlight Auto Power On 3 Press VOL or VOL to select Disabled or Enabled 4 Press the SETUP button to return to the previous menu PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 PDI P14T User Manual Page 19 of 56 Inactive Power Off h mm The TV will automatically power off after a specific period of viewer inactivity providing energy savings Enter the Features menu Press CHA or CHY to highlight Power Management Press VOL a or VOL to select an active time or select Disabled to disable this feature Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Not
22. 5066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 14 of 56 Add Delete Channels Individual analog TV channels that are missing can be manually added to a Service Level Or analog TV channels that require deletion can be manually removed from a Service Level Digital channels found during Auto Programming can be enabled or disabled in each service level 1 on e ey ee E From the Channels menu press the CH A CHY to select Add Delete Channels Press VOL VOL to select Press CHA CHY to select the Service Level you wish to add or delete channels Press VOL VOL to enter the Add Delete Channels menu for that Service Level Press CHA CH to select Analog Channel Press VOL VOL to scroll through every available channel The channel number changes to indicate the current channel viewed Press CHA CH to select Add Delete Analog Channel Press VOL a VOL to alternately Add or Delete the current Analog Channel from the Service Level Press CHA CH to select Enable Disable Digital Channel A listing of all digital channels found during Auto Programming will be displayed NOTE f the Enable Disable Digital Channels states no Channels either the TV did not locate any channels during Auto Programming or the Mode was set to Analog Only during Auto Programming 10 Press CH A CH to select a Digital Channel 11 Press VOL VOL to alternat
23. 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 6 of 56 Poweron Capto ee 18 AIO O aan E 18 late eme TE r OM A I EE 19 Sie 19 Caption Text Modes amet eR Soin ee ardent ee ennemi anne ee ee nr eh en en int 19 Riet Weeder 19 Digital Mode TIMES Slim oda 20 Chaine ip RO Welt a o e ceria dd e e iat oes 20 Channel te Ee unt ee 20 POW GI Ol ARCE MOS ae end abad oc 20 Front Buton BACON E Ntra 20 OSD Language On Screen Display ccc ccsccecceccceseeeeececeseeeeeseceseneeeseceseeceesaceseneeeseceseeeeeseceaeeeeesecaeeneeessceseneeessceseeers 21 PP o A 21 Soto Enabled data ted 21 SOU NIMC Se ae sn Een a Gi ee ea le cig ene ii 21 OS Oy ONCE RS italia 21 e El EE 22 DIAGNOS A o o E E OO SEO E A 22 RESetlo Factory RE IS 22 AN O A tee sae cine oi oi 22 USB Cloning and FW WiC eiii lacados 22 Restore SOLUS E Wanda iS A A uit de 22 SVECU TOU RS a ea data in de ae ne dant dela Diet 23 Upload Boot Code e TVs 23 diles A AAA A O 23 SEENEN 23 Tablet Android Setup and Usage Instructions 00nnnnn00nnnnnneannnnonnnnennsrnnnnersrnrnnnrnnrrrosnnrrrrsrnrrressnntrrrrnrtresrnrrrersnnnrrrensnnenee 24 Android SOUNC C e y en 24 interacting with Android TOUCH amp TYPE EE 24 LOCK OCE EE 24 Switching from one user to the another Device Cleanup sise 25 A EE 26 lnStalling ANdroid APDICA ION Sima aid 29 Media formats supported by Android 30 FDDIICATIONS TOF Ne AGMINISI AON ias 30 GENNOS EE 30 VWVIF IS ee Ee Sic
24. CHA or CHY to change the sub rating Press the SETUP button to return to the previous menu Or press VOL lt to get out of the sub category From nee LU AT wl amp Position A Y EAL AP ee EN EEN AT et ee GAL D ES LUUT Note Categories that are rated for older audiences will be automatically blocked If you block TV Y category then TV Y7 will be blocked automatically Similarly if you block TV G category then TV PG TV 14 and TV MA will also be blocked PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 16 of 56 TV Rating This displays a list of parental TV viewing levels and allows for Blocking or Unblocking of TV content EE Television Rating Guides IV Rating From the Parental Control menu enter the TV Rating menu Press CH A or CH Y to highlight a particular TV Rating Press VOL lt or VOL to select Blocked or Unblocked Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Grade Meaning Fantasy Violence PRE ot Exit SETUP D Sexual Suggestive Dialog Guide Meaning Young Children Content not offensive to most viewers TV Y7 Children 7 and over Considered suitable for children over 7 may contain Fantasy Violence Scenes Parental Guidance Suggested Unsuitable for younger children may contain Suggestive Dialog
25. Daylight Savings Press CH lt or CH to select Auto On or Off depending on whether or not your viewing area observes Daylight Savings Time 7 Press SETUP to return to the previous menu To exit press E SETUP until the programming menus disappear Exit SETUP mo Channel up Power Off This feature causes the TV to turn off once it reaches the highest numbered last channel and is usually used with single button style pillow soeakers When the feature is disabled the TV will continue on to the lowest channel and not turn off 1 Enter the Features menu 2 Press CHA or CHY to highlight Channel Up Power Off 3 Press VOL or VOL to select Enabled or Disabled 4 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Channel to Other Source External signal sources connected to the TV such as DVD players or video game systems are shown in the current channel lineup after the highest channel and then shown on the TV Set this feature to Disabled to require the activation of the external sources by pressing the remote s or the TV s TV AV button Set this feature to Enabled to allow access to external devices by pressing channel up or down buttons on a remote or most pillow speakers 1 Enter the Features menu 2 Press CHA or CHY to highlight Channel to Other Source 3 Press VOL or VOL to select Enabled or Disabled 4 Press SETUP to return to the previous men
26. E SD CARD OPTION FROM UNDER SETTINGS gt BACKUP AND THE P14T DID NOT FACTORY RESET RESET TO COMPLETELY RESET THE DEVICE PLEASE SEE THE SECTION UNDER SETTINGS gt BACKUP AND RESET FOR DETAILS TOUCH THE I AM A NEW USER BUTTON SELECT CONTINUE AND WAIT FOR THE WELCOME SCREEN CONNECT A PC TO THE P14T VIA THE ANDROID SERVICE PORT AM AN ADMINISTRATOR CHANGED THE APP LOCKER PASSWORD AND FORGOT MY PASSWORD USING YOUR FILE EXPLORER WINDOWS BROWSE TO THE CONTENTS OF THE P14T SD CARD DELETE THE ADMIN FOLDER THE APP LOCKER PASSWORD WILL NOW BE RESET TO THE DEFAULT PLEASE SEE QUICK START GUIDE PD196 250 FOR PASSWORD PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 55 of 56 Specs Software Component Description Android 4 0 4 aka Ice Cream Sandwich Kernel Linux 3 0 35 some drivers backported from 3 2 Bootloader U Boot 2009 08 Android 4 0 4 Hardware Component Description Processor Freescale MX 6 Solo Single Core Cortex A9 processor running up to 1 GHz speed is dynamic based on system load and or FSL power profile service setting Memory Running Programs 1 GB Random Access Memory RAM Memory Storage 8 GB embedded Multimedia Card eMMC Note this memory is fixed on the unit and is not replaceable upgradeable Wireless Access Intel 100 105 802 11 b g n WEP
27. NEL e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Maintenance and Servicing The TV does not require periodic maintenance other than cleaning Never remove the back cover of the TV this can expose you to high voltage and other hazards If the TV does not operate properly unplug it and call an authorized service center or PDi Cleaning and Disinfection Clean the exterior of this television by removing dust with a lint free cloth CAUTION To avoid damage to the surface of the television do not use abrasive or chemical cleaning agents Spot test a new disinfectant by test cleaning a non obvious small spot on the TV s back cabinet keypad and LCD panel Allow the disinfectant to soak per its instructions and then wipe clean Do not use the disinfectant if the TV s surfaces show any sign of discoloration or softening Product Modification Do not attempt to modify this product in any way without written authorization Unauthorized modification could void the user s authority to operate this product Copyright PDi Communication Systems Inc claims proprietary right to the material disclosed in this user manual This manual is issued for user information only and may not be used to manufactur
28. PD C munication Systems Inc User Manual PDi Communication Systems Inc 40 Greenwood Ln Springboro OH 45066 Toll free 800 628 9870 Fax 937 743 5664 PDI P14T Arm Mounted Healthcare grade LCD HDTV with Android Document Number PD196 251R2 www pdiarm com Document Number PD196 251R2 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit This symbol indicates that there are Important operating and maintenance instructions in the literature PDI P14T User Manual Page 2 of 56 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED accompanying this unit Overhead Falling Hazard WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions TV s can pose a striking hazard when mounted at an elevated position Use only PDi mounting brackets support arms and appropriate hardware to assure TV will not fall from the mounted position Failure to do so may cause injury or death Rain and Moisture To avoid the hazards of fire or WARNING electrical shock DO NOT expose this television to rain or moisture or use in a wet location Oxygen Environment WARNING Do not use in any oxygen tent or A oxygen chamber Such use may cause a fire
29. T User Manual Page 46 of 56 While the device is being cloned you will see the screen to the right The time taken will depend on the number of applications and the size of files Le WI Full haci Creating master file for cloning Please wait DO NOT TOUCH the screen during this process Note The clone data file will be saved under Ysdcard admin master files folder STEP 3 Set Sharing Scheme Optional See Option 1 to use this device as an ftp server See Option 2 to use another device as a clone data server Clone data sharing options from this device This device is a server sf Option 1 If you want to use this device as a clone file server PESTE hi keep the checked option as shown and follow the next Device network name p14t 1d1b2 1d4d82c37al pdiarm local two steps Note The device network name and device ip Device ip address 192 168 10 69 address are not editable Go to file server Confirm and save slave config file 1 Touch Go to file server to set up the ftp server If prompted by the app es EMT locker please enter your security code 2 Confirm and save slave config file applicable for auto cloning and will be available in future release FTP Server configuration E Select the SD card Tab and browse the admin folder m You should be able to see the clone files you save under SDcard admin master files dave config preferences aml PDi Communication Systems Inc 40 Greenwood La
30. TA System PDi Communication Systems Inc OTA System Downloading Upgrade Package Verifying package If the unit is running a firmware release later than that stored in the OTA update archive the popup window PDi Communication Systems Inc OTA System will be updated to provide this information 4 0 4 SU8 20140207 Your software is up to date About Device This is a screen for gathering information for support and describes the device s e Internet protocol IP address es in use e Media Address Control MAC address es for the Wireless card and Ethernet chip Location services e Serial number Security e Amount of time the system has been running D Language amp input hours minutes seconds Backup amp reset e Model Identifier PDi TAB by default e Android version 4 0 4 in initial release e Kernel version 3 0 35 in initial release shows when the kernel was built e Build number this value holds the Android firmware version Date amp time de Accessibility Developer options Over the Air OTA P System Profile Setting System Profile Setting LT e Performance mode allows the system to Normal Mode potentially operate at higher CPU speeds which could make the system more responsive when running apps with higher resource demands e Normal Mode is the factory default mode of operation e Power saving mode is used to allow the system to run cooler and potentially increase the
31. TION NEEDED FOR TIME ZONE CALCULATIONS ON SMARTPHONES AND TABLETS THE CORRECT TIME ZONE TIME CAN BE APPLIED THROUGH THE SETTINGS APP PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 54 of 56 START THE SETTINGS APP TAP THE APPS ENTRY UNDER DEVICE TAP THE ALL TAB TAP THE ENTRY FOR THE PROBLEMATIC APP IF ENABLED TAP THE CLEAR CACHE BUTTON TRY RESTARTING THE APP TO SEE IF THE PROBLEM GOES AWAY IF NOT REPEAT THE PREVIOUS PROCESS BUT NOW TAP THE CLEAR DATA BUTTON TRY RESTARTING THE APP TO SEE IF THE PROBLEM GOES AWAY IF THE PROBLEM STILL PERSISTS TRY INSTALLING A NEWER OR SLIGHTLY OLDER VERSION OF THE APP EE IF THE PROBLEM IS STILL NOT RESOLVED ENTER a e E THE WIPEUSERDATA APP AND TAP THE CONTINUE EE NEW USER BUTTON TO RESET THE UNIT THE USER ENEE COSTE WILL NEED TO CREATE A NEW PIN AND RELOAD ANY EE DATA APP THAT THEY INSTALLED IF ALLOWED IF NECESSARY INSTALL THE PROBLEMATIC APP FOR THE USER FROM A KNOWN GOOD SOURCE IF THE PROBLEM PERSISTS USE THE FACTORY DATA RESET OPTION IN THE SETTING APP UNDER BACKUP amp RESET PERSONAL SECTION AND CHECK THE BOX TO ERASE SD CARD ONCE THE DEVICE IS RESTORE HAVE THE USER CREATE A NEW PIN REINSTALL DATA APPS AND OR INSTALL THE PROBLEMATIC APP FROM A KNOWN GOOD SOURCE IF THE PROBLEM STILL PERSISTS CALL PDI SUPPORT MAKE SURE YOU CHECK THE ERAS
32. WPA WPA2 open networks Bluetooth not available Wired Access Optional Standard Ethernet RJ 45 Display HDMI running at 1280x720 resolution internally connected to TV main board External Access USB service port a future revision of the hardware will provide USB On The Go from the same port Video Processing OpenGL ES 2 0 and OpenVG 1 1 Hardware Accelerators and Multi Format 1080p Decoder and 720p HD Video Encoder PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 56 of 56 Firmware The TV firmware for the model PDI P14T is field upgradeable but normally does not require this process and should be performed by the hospital technician via USB A special data file is required from the manufacturer to complete this process The file is posted on PDi Communication System s web site http www pdiarm com support Firmware files are written to the PDITDF directory of a blank USB flash drive connected to the TV s USB port and updated using the TV s menus Once complete the TV settings may need to be reprogrammed Many common conditions which appear to render the Android nonresponsive are easily addressed by a simple reboot process Please contact PDi Technical Support for more information at 800 628 9870 ext 505 The unit may be reset by reloading Firmware via the micro USB Limited Warranty PDi Communication S
33. abe Wallpaper e Change Wallpaper e wn e Change sleep timeout Q Data usage H 1 More reep e Change font size for user interface elements Ed Ethernet configuration deele e S Sound Storage E Apps Ay BEER Location services Storage anions e View internal storage allocation for PDi apps and ver media Y Data usage en space More Apps e View internal storage allocation for user installable ae Ethernet configuration apps and media sz vim e Mount SD cards pre installed option on some di sound NTERNAL STORAG models supported in a future version of the P14T display and USB storage devices E sose Total space E Apps PERSONAL Available Accounts amp sync Erase SD card Location services PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 36 of 56 Settings Apps WIRELESS amp N e Manage downloaded and installed apps e wn e Manage apps on SD card pre installed option on Data usage some models More e Manage currently running apps and services iio e Manage all apps and services FRE No apps e View storage and memory resources occupied by Display all processes on Note To optimize your storage on memory usage SS uninstall apps you don t use from main storage on SD card Sion Remove any problematic apps or services that are running Personal Set your personal preferences for Acc
34. alize this device Wireless and Networks From this screen you can maintain Wi Fi access points View Data Usage Set up Virtual Private Network VPN access and maintain Ethernet settings PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 Wi Fi Connect To Wi Fi Networks Dynamically 1 Slide the Wi Fi switch to the ON position If not already set to ON The tablet scans for available Wi Fi networks and displays the names of those it finds Secured networks are indicated with ak A If the tablet finds a network that you connected to previously it connects to it Touch a network name to see more details or connect to it and type a security code password if necessary You can tap the Show password checkbox to see the password characters as you type them instead of an asterisk mask If necessary tap the Show advanced options checkbox to modify the Proxy and internet protocol IP settings proxy server facilities access to other network resources and may be needed in some environments If you are unsure whether or not a proxy setup is required please contact your information technology IT department If they indicate such a setup is required have them provide the proxy hostname proxy port and any addresses that the proxy should not be used for when servicing requests To enter the information tap on each field and e
35. ample pdiarm com a DNS server must be present on the network to retrieve the IP address for the human readable server address provided 3 Tapthe Port button and enter the port of the service to use lt is standard but not required to use 80 for HTTP 443 for https 21 for FTP and nothing for file or jar selections PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 42 of 56 4 Tapthe Configuration Suffix if necessary to provide access to custom OTA updates provided by PDi service personnel The configuration suffix is a filename that references a remote configuration file that provides a description of the OTA update file including critical timestamps that determine whether or not to apply an update to the P14T The P14T will not update to an earlier release Do not modify this value unless directed by PDi service personnel The default value is build prop 5 Tapthe Archive suffix to provide access to a custom OTA update provided by PDi service personnel Normally this value does not need to be modified IRL CONFIGURATION Protocol Ch Accounts amp syne hange the type of server being accessed Location servicos A Security Port Tap it se dierent port A Language amp input Configuration Suffix i Backup amp reset Tap to sp cugiom update comio SYSTEM Archive Suffix Tap lo er custom upime park
36. anced Options checkbox and provide more detailed information for the VPN network such as the DNS servers to use and applicable forwarding routes Tap on each field to enter the appropriate information Touch Save Tap on the newly created entry and provide a username and password Tap on the Save information to retain the information in the future Tap Cancel to stop the logon process Once connected the following notification and system tray icon will be visible 9 VPN is activated Connected to Freevpn Uk Tap to manage the network If you were to conduct a web search asking for you current IP address assuming you were in the United States and connected to a United Kingdom UK based VPN service you should see the following result returned by the search engine Your IP Address ls o Eia Note The IP se will Services Network Sharing Device EE Sei W s Web service and on time of City London i connection Region London City of Country United Kingdom SEN sue Click for P d Ke j Gig Birmingham Nerwich more details 2 e NGA SCH e i de lands Mia O Oxford ep O AE Cen O d Bristol ca a NE Cagis A O Channel DUAL ee dh 04 Plyrmoea Belgi im o j Amiers 3 A oe E H re x nb PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 Ethernet Configuration The P14T is capable of providing wired intern
37. ave Touch Enter filename here and you will be able to type your desired file name Touch Save clone data to file to start saving the clone data If the file name you have chosen already exists then you will be presented with the file already exists screen Touch OK if you want to overwrite the existing file or touch cancel to choose a different file name Note The default file name is clone ab PDI P14T User Manual Page 45 of 56 Cloning configuration choose type Master Slave Skip for now Cloning setup information Cloning enables you to standardize the settings and applications across all devices on your network You can clone the following Y System data like home screen icons wallpapers and update settings Application Data like preferences files etc Your commercial application installables Media files images or videos stored on the shared storage If you wish to configure clone now then slide the screen or use tabs at the top of this screen OR you can come back once you are ready to clone your changes will come back later i Choose a filename to save the clone data file will be saved under sdcard admin master files Enter filename here ii Save clone data to file The file clone ab already 01515 Creer file PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14
38. ay is to use the web interface HTML5 app version of a file sharing service Although PDi cannot recommend a particular service common file sharing services are provided by Google Drive Amazon Cloud Drive Dropbox and Microsoft OneDrive Although it is possible to side load the Android apps for each of these services it requires administrative privileges and PDi may not be able to support such a configuration The patient complains about app x misbehaving and randomly shutting down when performing actions that used to succeed just fine what are some basic troubleshooting steps can take for to get the app to operate properly These are some basic troubleshooting steps Start the Settings app Tap the Apps entry under Device Tap the All tab Tap the entry for the problematic app If enabled tap the Clear cache button Try restarting the app to see if the problem goes away If not repeat the previous process but now tap the Clear data button Try restarting the app to see if the problem goes away If the problem still persists try installing a newer or slightly older version of the app and see if it works better 0 If the problem is still not resolved enter the WipeUserData app and tap the Continue new user button to reset the unit The user will need to create a new PIN and reload any data app that they installed if allowed 11 If necessary install the problematic app for the user from a known good source 12 If the problem pe
39. b 2014 I __ _ _ _ __ __ __ _ _ Emoticons The On Screen Keyboard when using the Google Search Bar Numbers and Symbols gt Android Keyboard Settings PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 27 of 56 At the bottom left of every screen no matter what you re doing you will always find these three navigation buttons 07 47 Thu 13 Feb 2014 Back Opens the previous screen you were working in even if it was in a different app Once you back up to the Home screen you can t go back any further in your history Home Opens the home screen lf you re viewing a left or right Home screen opens the central Home screen ID J Recent apps Opens a list of thumbnail images of apps you ve worked with recently To open an app touch it To stop running an app from the list swipe it left or right Note Android will automatically stop running an app when the system runs low on remaining available memory therefore it is not always necessary to quit an app App Widget Clock widget digits from one to nine Match the color of the launch bubble to the frozen bubbles to make them go away before time expires or the stacked bubbles cross the foul line DroidFish Display the date and time on the full screen and or set an alarm Zeebox Provides a program guide of television pr
40. cessary but is seldom required Please contact the factory for additional instructions Note Boot Code must be updated before firmware Exit SETUP OR OK Next Le Position Y 1 With TV on insert a USB thumb drive with desired firmware into the cloning port 2 USB Media screen will appear 3 Press OK Automatic Upload Firmware to TV Upload Firmware to TV This menu will allow you to download the most current firmware Upload the latest version of all available Automatic will find the latest version and digital firmware will firmware to TV let you choose specifically which version to upload 1 With TV on insert a USB thumb drive with desired firmware into the cloning port USB Media screen will appear Press OK Press CHA or CH Y to highlight Upload Firmware to TV Press VOL to see firmware to upload Choose between automatic and digital uploading A confirmation screen will appear in whichever upload you choose ds SL RF Cloning and FW Update Currently not enabled on this TV Support PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA Phone 800 628 9870 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 PDI P14T User Manual Page 24 of 56 Tablet Android Setup and Usage Instructions Android Source Enabling Before using the tablet make sure e In the TVs SETUP MODE Sources So
41. ction 2 Adjust the picture item using the VOL VOL buttons to the desired level 3 Press the SETUP button to store the picture values m Service Level e Brightness Picture Contrast Color Tint Color Temperature Sharpness PC Analog HDMI Picture Component Input Picture Noise Reduction Enabled Sound Channels Features OSD Language Sources FM Radio System LA A AURA A Position Position Y Exit SETUP OR OK Next 4h Exit SETUP OR OK Next 4 gt PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Color Temperature The color temperature menu adjusts the color balance of the picture Standard Reddish Greenish Bluish color temperatures are available for selection however the individual colors are not adjustable The USER setting allows individual adjustment of each of the TV s primary colors The color temperature setting is best set using a calibrated signal source capable of generating a test signal containing both pure white and pure black picture components Enter the Picture menu Press CHA CH to highlight Color Temperature Press VOL to enter it Press CHA CHF to see the individual settings On User press VOL VOL to highlight R G or B or to get out of the customized adjustments Press CHA CH to adjust R G or B
42. d to a non connected source generates nuisance hospital maintenance calls of TV Not Working when in fact the TV does work but has been set to an inactive source From the SETUP menu press CHA or CH Y to highlight Source Press VOL or VOL to select it Press CHA or CHY to highlight a desired source Press VOL lt or VOL to change the source status to either Disabled or Enabled APO Auto Power Off NOTE Sources that are grayed out are not installed in the TV Enabled APO means the TV will turn off if there is no video 5 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear SP Enabled APO Source Enable SR Composite Video _ Enabled APO Source Name Component Enabled Power On Source HDMI1 Enabled Module Android Enabled PC ANALOG Enabled FM RADIO Enabled USB Media Enabled Position Y Position T Exit SETUP OR OK Source Name It is possible to name the sources that you use with your TV EE Choices are None Cable Antenna Satellite BD DVD VCR ts A ee Game MP3 Player IPTV PC and Set Top Box z E Se gs HDMI 1 None Power on Source PC ANALOG Set Top Box The TV can be preset to power on to a selected source Enter the Sources menu Press CHA or CHY highlight Sources Press VOL to select it Press VOL or VOL to change to the source that you want the TV to power on to Last TV Composite Video Position Y Component HDMI 1 And
43. e Auto Power On must be set to Disabled for this function to operate Gg o Bed A B The TV can be controlled by a patient IR remote The TV offers Bed A and Bed B selectable codes for independent control of a single television in a two television room The patient remote can be toggled between Bed A and Bed B codes by pressing using a paperclip the CODE button on the remote Enter the Features menu Press CHA or CHY to highlight Bed A B Press VOL or VOL to select A or B Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear oo NS Caption Text Modes Teletext can be displayed in addition to Captions Teletext is not normally broadcast in the USA Caption Text Modes should be set to Disabled for TVs operated in the USA 1 Enter the Features menu 2 Press CHA or CHY to highlight Caption Text Modes 3 Press VOL lt or VOL to select Disabled or Enabled 4 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Digital Captions TRE Default Customization of Closed Captions on ATSC QAM channels Font Style Default m Foreground Color Default 1 Enter the Features menu 7 a A Sien Gen 2 Press CH or CH y to highlight Digital Captions E Foreground Opacity Default 3 Press VOL to select it Background Opacity Default 4 Press CH A or CH Y to highlight the attribute you wish to change m Edge Style Default 5 Pre
44. e 41 of 56 Developer Options Most of the features are NOT INTENDED FOR regular mem ADMIN USE abies USB debugging Enable disable USB debugging from OTG USB header GEST connection E veier e Display Development device ID only needed by Security sone tore Soya el developers D Language input Aow mock locations e Force the device to stay awake while on AC Backup reset Desktop backup password e Allow the device to use fake locations Se SE e Password protect backups not provided in current o te build SE Pointer location e Flash the screen when parts of an app take a long P over the Air OTA Show touches time About device Vereen e Display an overlay showing debug information on user touch screen ops e Display visual cues that the user touched the screen e Flash the screen when the app refreshes its display e Show CPU usage e Make the graphics subsystem use its hardware capabilities e Remove apps from memory when the user moves on or back to the home screen app screen etc e Limit the number of apps that the Android device urns at a time e Enable disable showing app is not responding ANR warning if it is not the app the patient is using e g a background app Note CPU usage shows the average process load from the last three sample points it took and the top two three processes using CPU resources Over the Air OTA The Over the Air system menu setting allows the administrator to automatically update the P14T with
45. e CHA CHY button to select Power on Volume 2 Press the VOL VOL button to determine your preferred volume when the TV turns on Setting the level to LAST causes the TV to remember the last volume level used by the TV prior to turning off 3 Press the SETUP button to return to the preceding menu Internal Speaker Enable Balance Minimum Volume Maximum Volume Power on Volume Internal Speaker Enable HDMI1 Audio Port Android Audio Port Composite Sound Mode Volume Leveling Headphone Sound Mode Position A Y Page 11 of 56 0 100 100 Last gt HDMI 1 Android L R gt Stereo Exit SETUP OR OK Balance Minimum Volume Maximum Volume Power on Volume Internal Speaker Enable HDMI1 Audio Port Android Audio Port Composite Sound Mode Volume Leveling Headphone Sound Mode Position A Y Exit SETUP OR OK Next gt Once the TV is on the volume can be 0 100 100 Last gt HDMI1 Android L R La Stereo Next l gt The speaker s inside the TV s cabinet can be turned on or off for each TV Service Level Note Sound to the earphone jack remains on at all times In the Sound menu press CHA CHY button to select the Internal Speaker Enable menu item Press VOL VOL to enter the menu Press the CHA CHY button to select the desired Service Level Press VOL VOL to select Disable or Enabled Press the SETUP button to return to the preceding menu
46. e Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664
47. e anything shown herein Copyright 2009 2014 by PDi Communication Systems Inc All rights reserved Trademarks All brand names and product names in this manual are trademarks registered trademarks or trade names of their respective holder PDi Your Sou8rce for Healthcare and Wellness Infotainment is a trademark of PDi Communication Systems Inc Springboro Ohio manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Underwriters Laboratories The model PDI P14T Hospital Grade LCD HDTVTV is a specialized TV and should be installed to National Electrical Code specifications This device is safety tested and listed by the Underwriters Laboratories as a product suitable for use in health care facilities in E US both the United States and Canada LISTED PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 Ce symbole indique qu une tension dangereuse constituant un risque de choc lectrique est pr sente dans cet AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE appareil NE PAS OUVRIR AVERTISSEMENT AFIN DE REDUIRE LE RISQUE DE CHOC ELECTRIQUE NE PAS RETIRER LE COUVERCLE L APPAREIL NE CONTIENT AUCUN COMPOSANT SUSCEPTIBLE D ETRE REPARE PAR L UTILISATEUR CONFIER L ENTRETIEN A DU PERSONNEL QUALIFIE Ce symbole indique qu il existe des instructions d utilisation et d entretien
48. e the P14T is operating Tap on the DNS 2 entry and enter a value If you enter the value 4 4 4 4 you are asking for access to the Google Public DNS service which may or may not be suitable or allowed for the network where the P14T is operating Provide a password if not already done and if required The Connect button should now be enabled Tap Connect Signal strength Excellent Security WPA2 PSK Password Show password Show advanced options Proxy settings None IP settings Static IP address 192 168 8 107 Gateway 192 168 200 1 Network prefix length E DNS 1 DNS 2 Cancel Connect PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 PX Document Number PD196 251R2 PDI P14T User Manual Page 33 of 56 Data Usage Your data usage is measured by your device This feature is currently non operational in the P14T More VPN Virtual Private Network To configure VPN access you must first obtain configuration information from your administrator The VPN screen allows you to add VPN networks and adjust their settings To view this screen and perform the tasks described here go to Settings gt Wireless amp Networks gt More gt VPN 1 2 PPTP PPP encryption MPPE From the VPN screen touch Add VPN profile In the form that appears fill in the information provided by your network administrator lt may be necessary to tap the Show Adv
49. ely Enable or Disable the current Digital Chanel from the Service Level 12 Press SETUP to return to the previous menus Channels Auto Program a Mode ___ Digital Only Channel Sequence Interleave A D Add Digital Signal Cable STD Free Programmed Basic Blank gt m Signal Cable STD a Auto Program e Add Delete Channels m Clear Service Level m Copy Service Level m Parental Control Power on Channel a Channel Lock Disabled Premium Blank gt m Channel Memory Override Enabled Pro Idiom MTI Port Position A Y Ss ji gt Position AV Exit SETUP Exit SETUP Clear Service Level This empties a service level of all its programmed channels leaving it blank Confirmation 1 From the Channels menu press the CH A CH to highlight Clear Service Level 2 Press VOLP to select 3 Press CHA CHY to highlight the Service Level Free Basic or Premium d Press VOL to select the highlighted Service Level 5 Aconfirmation page will appear Press Yes A to proceed Press Y or SETUP to return to the previous menu Note After a Service Level is cleared the TV returns to the Clear Service Level menu Blank will appear to the right of the Service Level 6 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Exit SETUP PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743
50. ement mises la terre conform ment aux dispositions du Code Exemple de mise ala terre selon le Code national electrique NEC Prise de terre Cable coaxial de l antenne Bloc de mise a la terre du cable coaxial NEC Section 810 20 Conducteurs de mise a la terre NEC SECTION 810 21 Prise de terre ee Systeme d electrode de mise a la terre du Panneau du compteur du service electrique sercice electrique NECART 250 PARTIE H canadien de l lectricit Partie 1 FCC Cet quipement a t test et s est av r conforme aux limites pour un appareil num rique de Classe conform ment la partie 15 des r gles de la FCC Ces limites ont t con ues afin de fournir une protection raisonnable contre les interf rences nuisibles lorsque l quipement est PDI P14T User Manual Page 3 of 56 utilis dans un environnement r sidentiel ou commercial Si cet quipement provoque des interf rences nuisibles a la r ception radio ou t l vision ce qui peut tre d termin en teignant et rallumant l appareil l utilisateur peut essayer de corriger l interf rence par une ou plusieurs des mesures suivantes e R orienter ou d placer l antenne de r ception e Augmenter la distance entre l appareil et le r cepteur e Brancher l appareil sur une prise situ e sur un circuit diff rent de celui o le r cepteur est branch e Consulter le d taillant ou un technicien radio TV qualifi R parations et entre
51. eserved almost all of those features on the P14 Tab And also provided admin control over the ability to install apps so that malware cannot enter the device Common Android malware today have exploited sms and other telephony functions that Pdi Tab does not offer For most of the usage on the P14 Tab we would recommend to follow anti malware techniques like secure internet communication for sensitive information applications to store encrypted data on the device etc Now if application downloads are allowed and user installs an app that is a malware the extent of damage would be limited to that user session Once the new user button is pressed P14 Tab cleans up the writeable data and sdcard partitions thereby removing any existing malware installed by the previous user Future versions of Android are identifying and addressing critical gaps in Android Security Called Security Enhanced Android Our updates to P14 Tab will include these improvements Q Do you wipe the device after each use A Yes moving from one user to the other i e on new user button the P14Tab wipes itself and becomes like a new device wifi settings and cloning information are preserved for user transition without any administrative need Q Can they save data to the device A Yes any data downloaded by the apps like files pictures etc are saved in the user space All this is protected by a user chosen password and gets wiped out when a new user
52. et access provided the unit was configured with this option at production time If it was there will be a category 6 RJ 45 8P8C modular connector twisted pair cable accessible from the neck of the unit This cable PD106 559 must be plugged into an accessible Ethernet port From this screen you can enable disable the Ethernet connection and configure Ethernet access The first menu item on the right is a checkbox that can be tapped to enable or disable Ethernet access If the Ethernet cable is connected and a successful network connection is made the following icon will show up in the system tray PDI P14T User Manual Ethernet Turn off Ethernet Y wn Ethernet configuration onfigure Ethernet device ON Data usage More DEVICE di Sound d Display Storage Ch Accounts amp sync Location services Page 34 of 56 D Note the lime green color in the lower part of the icon A unit that is NOT connected will show all white The second Ethernet menu item allows for configuration of the wired network connection By default the device is enabled for dynamic e g DHCP connection However if static access is required tap on the Ethernet Configuration button and provide the following information after obtaining the required IP address netmask DNS IP addresses and gateway IP address from your information technology department personnel 1 Leave the Ethernet Devices selection as is The P14T only supports a si
53. hazard Note to Cable TV Installer This reminder is provided to call the cable TV systems installers attention to Article 820 40 of the National Electrical Code The code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of the cable entry as practical Canadian installations shall be properly grounded in accordance with the Canadian Electrical Code Part 1 Example of Antenna Grounding as per NEC National Electrical Code GROUND CLAMP COAX GROUNDING BLOCK NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVIC E GROUNDING ELECTRODE SYSTEM ELECTIC SERVICE METER PANEL NEC ART 250 PART H FCC This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense SERVICE PERSON
54. ical key lock when in Disabled service level the TV can be turned OFF and ON but cannot be used for viewing standard message appears on a black screen Free lets patients watch hospital education and information SETUP MODE AAA gt A channels without renting the TV The channels containing programming for no charge are typically programmed into this Service Level level of service This is the factory default setting for service level SC a Channels Basic service typically allows additional channels beyond those Penhors offered in the FREE level OSD Language Sources Premium is the highest Service Level with typically the most FM Radio channels available for viewing System Press the SETUP button to display the SETUP MODE menu Press the VOL to disable or select desired service level Free Position Y Basic Premium osition Exit SETUP OR OK Picture Adjustment of picture Brightness Contrast Color Tint Color Temperature and Sharpness is available to customize the levels you prefer using the on screen menus Brightness Contrast Color Tint and Sharpness These settings have a range of 1 100 To change one of them simply change the number by following this process Press the SETUP button to display the SETUP MODE menu Select the Picture menu item 1 Press the CHA CH Y buttons to highlight the desired picture item Brightness Contrast Color Color Temperature Sharpness and Noise Redu
55. ilia iniciada 30 VE EE 31 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 7 of 56 Data US iii 33 A teens 33 da e e o UE A 33 Ethernet CONAN ar A A ASA 34 SUICIDE AA 35 ent 35 BES of APRO PR en ee eee a ree 35 DORE Re ee EE 35 EEN 36 Per MA SR A ann 36 ACCOUNT 36 ato OA o O ne O O PO A to ec te te ec nee 37 Addine EXchaNSe ACCOUNT nie ae tes de D one ee ee ess Cents suena Sn on io en aus 38 ESCANEO EE 39 SEENEN 39 TEE Eelere 39 BackUp Sk EE 40 SDE LE E EE EE Rd ee EE E A en eae E 40 Date amp TINE aa a O 40 EECH 40 Developer ed 41 Over NEAN OTA EE 41 PTO DC EE 43 System de Seting BE 43 A 44 Copy Settings from Android Master Configuration sise 45 Restore Settings to Android Slave Configuration oocccccccoconccnncnononcnnnonnnnnnnnnnnnnnnrnnnnnnnnnrnnnnonnnnrnnnnnnnnnnrrnnrnrrnnnnnnrnnnnncnss 48 Eeer 49 Android Troubleshooting TO Re tido 53 Sn sacs eae ade aoe ee cee ena ee 55 A A dade AE N oss 56 HME VV AUT MMU ts in cts La a ices ct fh te ae nate Len ete a la see Un tte aaa aac a ann acti a es ne nie tt 56 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 8 of 56 Installing Television Installation Precautions e Any changes or modifications in construction of this TV which are n
56. information display purposes Enter the Channels menu Press CH A or CH Y to highlight Channel Lock Press VOL lt or VOL to select Enable or Disable Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear SUN Channel Memory Override Allows a channel to be entered with the remote s number buttons that is not memorized in the current service level 1 Enter the Channels menu 2 Press CH A or CH Y to highlight Channel Memory Override 3 Press VOL or VOL to select Enabled or Disabled e DISABLED Service Level Channels only e ENABLED All possible channels 4 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Pro ldiom MTI port is used with Lodgenet otherwise use Free to Guest Features The Features menu provides adjustable settings that customize the TV to your hospital 1 Press the SETUP button 2 Press CHA or CHY to highlight Features 3 Press VOL to enter the Features sub menu Power on Caption Mode Power on Caption Mode memorizes the caption setting upon powering Power on Captions Mode Last the TV off With this feature set to off the TV will always power on with Auto Power On Lock Disabled the captions disabled With this feature set to Last the TV turns on z pe Power Off h mm WEN r E e with the last caption setting enabled E ee ep pica a Digital Captions P
57. ion Owner information is a great way for D Language amp input 4 Backup amp reset SYSTEM Date amp time administrators to display institution wing department etc Language amp Input e Change the language used to display text on Settings components e Enable disable suggested spelling corrections Ges e Setup a personal dictionary to recognize D iaa proper names technical terms etc E storage e Change the default keyboard for input D Apps e Enable disable various keyboard layouts taana Note and Chinese Pinyin Not all labels will display translated labels when a non English language is selected We Accounts amp sync Modify Text to Speech TTS output settings such as changing the preferred TTS engine speed of speech and listening to an example The active keyboard layouts are English US O Location services A Security A Language amp input CH Backup amp reset SYSTEM Q Date amp time Warning Not all translations will be exact when a non English language is selected SCREEN SECURITY Screen lock Automatically lock nds after sleer Power button instantly locks Owner info ENCRYPTION Encrypt device PASSWORDS Make passwords visible DEVICE ADMINISTRATION Device administrators Language Spelling correction Personal dictionary KEYBOARD amp INPUT METHODS Default Android keyboard RH ES SPEECH Text to speech output MOUSE TRACKPAD Pointer speed
58. ion for manual slave set up Done STEP 3 SET SHARING SCHEME OPTIONAL Congratulations your master clone setup is You have chosen this device to serve the clone data files Make sure that you have the ftp server see section 3 running on this device complete Touch All Done to exit the cloning application All Done PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 Option 2 e f you do not want to use this device as a clone file server uncheck the check box next to This device is a server Slide to the next screen Congratulations you have saved your master clone data file You have not chosen this device to serve the clone data files For dynamic cloning you would need to put the clone ab file on a server You can then use that server information for the slave configuration file See the section on Slave Configuration for details Touch All Done to exit the cloning application Restore Settings to Android Slave Configuration To Clone from the clone data saved in previous section to another P14T follow the steps below From the android home screen tap the Hicon 1 Inthe All Apps screen press the Clone icon 2 Enter the security password and press a 3 Choose Slave to enter configuration setup Make sure the entries are in Green This means the host is reachable and the file is availab
59. l and wish to have it displayed upon initial use of the TV The patient can then tune to any other available channel Enter the Channels menu Press CH A or CH Y to highlight Power on Channel Press VOL to select it Press CH A or CH Y to highlight the desired Service Level Free Basic or Premium Press VOL lt or VOL to select one of the channels currently available in the Service Level or Last NOTE Last will cause the TV to turn on to the last channel before it was turned off 6 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear pee I a Page 17 of 56 Change Password ws Enter Password a Confirm Password _ Exit SETUP OR OK Parental Control TV Rating MPAA Rating Digital Rating Clear Digital Download New Change Password Block Aux Sources Blocked Parental Lock Duration Always gs Parental Lock Disabled Position A Y Exit SETUP OR OK Next 4 gt Power On Channel Channel Free Service Level Last Basic Service Level Last Premium Service Level Last Exit SETUP OR OK PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 PDI P14T User Manual Page 18 of 56 Channel Lock Locks the currently viewed channel and prevents patients from tuning to any other channel This feature is useful when the TV is used for
60. le Touch Done to save the slave config file This device will be cloned on next new user Note Check the box next to Check for updates to the clone file if you want the clone device to check for updated file on a new user To clone this device now and also for future users of this device touch the Clone this device button When cloning is complete the TV will return to the home screen PDI P14T User Manual Page 48 of 56 You are not using this device to share any cloning files This device is a server STEP 3 SET SHARING SCHEME OPTIONAL Et clone You have not chosen this device to serve the clone data files For dynamic cloning you would need to put the clone ab file on a server You can then use that server information for the slave configuration file All Done Slave configuration setup Scheme gt ftp Hostname or ip Address gt p141 1d1b21d4d82c37a1 pdiarm local Port Number gt 2121 Filename with path gt admin master files clone ab Check for Updates 10 the clone file on a Meur Liser Note Checking this option may increase the user switchover Lime HA dor local Done Clone this device Full restore Preparing your home screen Please wait PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 49 of 56 FAQ Is there a complete separation between
61. n every new user The P14T internally deletes any data in Tra USA far a see es eee N the cache data and the sdcard partitions AS erent RE Administrative information like wifi and clone file sine configuration is retained 5 Kb approx 20 seconds PLEASE DO NOT TURN OFF THE DEVICE DURING THIS TIME Cancel existing user Continue new user Welcome Screen Sign In After cleaning up the device the P14 Tab enters the WELCOME screen WELCOME PDi Tab can bring you more than just TV A few steps before we start Step 1 Secure your personal data Choose a password for yourself Step 2 Device Setup Device will configure itself and take you to the After touching Continue you need to enter a security home screen code This code must be at least 4 digits Continue Touch Continue when done shovee your i Choose your PIN Cancel Confirm your code Press ok Confirm your PIN PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 26 of 56 Home Screen AM The following is a screenshot of a sample home screen 07 47 Your screen will show icons based on your AGREN facility administrator settings At the top left of the screen you ll find Google Search 07 A7 which lets you search your tablet or the Internet Touch Google to type your search terms Thu 13 Fe
62. ne Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 47 of 56 Slide to the ftp server tab You will see your network status and an icon labeled start Service wus Touch Start Service to start the ftp server on this device lf you see the icon label No wi fi Network please check your network connection gt Start Service Note The ftp server will work only on a Wi Fi connection Note The ftp server will have to be manually re started when the device reboots Touch the to go back to the cloning application screen Be ae E Clone data sharing options from this device This device is a server Cl If you would like to use the auto cloning feature touch the Confirm and save slave config file button Share scheme ftp Device network name pl t 1d1b21d4d8 2c37a1 pdiarm local Device ip address 192 168 10 69 Go to file server Confirm and save slave config file The Confirm and save slave config file takes you to the Slave configuration setup Slave configuration setup e Scheme gt ftp Make sure the entries are in Green This means the host is reachable and the file is available A Hostname or ip Address gt pl4t 1d1b21d4d82c37al pdiarm local Touch Done to save the slave config file that will be SEET picked up by the auto cloner Filename with path gt fadmin master files clone ab You may also use this informat
63. need to be constant or are there other ways to handle dynamic IP addresses A We have the provision to have fixed IP address on the P14Tab But we could solve the problem of dynamic IP addresses in other ways 1 By using the master network name in the cloning configuration PDi tab has a unique network name by default e g P14T 051b49d4d72d7422 Other P14Tabs can access the master device by name instead of an IP address An IT Administrator should be able to address this 2 It is also possible to keep the clone file on an HTTP server e g www lt your websitehere gt P14Tab clone ab and use that configuration for slaves PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 52 of 56 Q How much band width do typical applications use A Bandwidth Usage This is just an indicative list Please note that typical cases may vary Activity Bandwidth Usage per Activity One hour of text based instant messaging IM chatting 0 01 MB Sending one email via Webmail Gmail etc 0 2 MB if email is plain text with no attachments Uploading a photo to Flickr Less than 1 MB if the photo is resized to 1024 x 768 Downloading a three minute song from iTunes Amazon 2 5 MB depending on the song and encoding Watching a five minute video clip from YouTube 5 MB 1 MB per minute on average Using video chat on Skype for 15 minutes 2 7 14 4
64. ngle Ethernet connection which is automatically named eth0 by the Android operating system 2 Tapthe radio button that says Static IP under Connection Type 3 TapthelP address field and enter four octets do not forget to enter the periods they are not automatically added as they are for Wi fi static connections 4 Tap the Netmask field and enter the masking value This entry is needed to access the appropriate subnetwork eg subnet 5 Tapthe DNS address field and enter the primary DNS IP server address the use of a secondary DNS IP server address is not supported with this connection type 6 Tapthe Gateway address field and provide the gateway IP address 7 Click the Save button to save value or discard to cancel the process Configure Ethernet device 17216 100 100 Hetmask d 255 255 255 0 172 16 100 1 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 35 of 56 Device Manage the Sound Display Storage and Apps on the device o _ Settings Sound Ree Volumes bd Modify Android sou nd volumes F Wi Fi RINGTONE amp NOTIFICATIONS e Change notification sound Data usage sas see e Enable disable touch sounds and screen lock E De SOU nd Ethernet configuration Touch sounds Screen lock sound o Display Storage E Apps Ay Accounts amp sync e Location services Display Be waar
65. nt the arm from springing open Arm Mounting This television is designed to attach to a wall mounted suspension arm adjusted to support a television weighing seven pounds PDAA507 C 1 Insert the TV swivel completely in the arm s clevis Align the swivel retainer plate s mounting hole over the arms mounting hole Thread the retaining screw through the retainer plate and into the arm s nose Tighten 2 The cable from the arm should be joined with the television cable wrench tightened and the connection covered by sliding the plastic boot sections into mating position Retaining screw Note Contact PDi for additional information on arm _ compatibility and cable requirements PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 PDI P14T User Manual Page 9 of 56 Programming Menus And Setup Note A programming remote control is required to perform all setup operations for the television The programming remote Part Number PD108 420 is NOT packaged with the TV and must be ordered separately The following instructions assume you have a programming remote have correctly mounted the TV and connected a coax cable that provides both power and RF signal Service Level This TV offers a disable and three different programmable Service Levels Free Basic and Premium Only one Service Level is usable at a time Disabled is like a mechan
66. nter the appropriate information In the Bypass proxy field the addresses should be separated with commas If the IP settings need modification refer to the Connect to Wi Fi Network Statically section PDI P14T User Manual Y Data usage More mE Ethernet configuration DEVICE di Sound 0 Display Storage E Apps PERSONAL Ay Accounts amp sync Location services Security amp NETWORKS WIRELESS Data usage PDIGUEST More PDI S Ethernet configuration e Ze PDITESTRACK DEVICE A W di Sound o Display Storage E Apps PERSONAL C Accounts amp sync Location services Security Good WPA2 PSK PDIGUEST signal strengt Excellent Security WPA2 PSK Page 31 of 56 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 32 of 56 Connect To Wi Fi Networks Statically The previous process to connect to a Wi Fi network requires the presence of a router on the network supporting dynamic host configuration protocol DHCP for automatically assigning internet protocol IP addresses to P14T units on the networks If the network does not support this protocol and or the P14T requires the use a fixed IP address for a dedicated purpose for example to act as a cloning server it will be necessary to configure the Wi fi access using a static IP address The IP address that is chosen must no
67. ogramming and social sharing of the shows the user will be watching on the TV side of the P14T Google Picasa Yahoo MSN Bookmark widgets to social sharing websites Twitter Facebook etc Wi fi Connection Widget Connect to a pre configured or open Wi fi network with a single tap PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 28 of 56 At the bottom right is the NOTIFICATIONS area Notifications alert you to the arrival of new messages calendar events and alarms as well as ongoing events such as video downloads When a notification arrives its icon appears at the bottom Fee Si right of the screen Icons for pending notifications and M 07 50 system icons showing things like Wi Fi signal or power Thu 13 Feb 2014 connection type always AC on P14T also appear on the bottom right To open the notification shade swipe up or tap from the o NA bottom right of the screen SC BR ee Certain notifications can be expanded to show more 2 information such as email previews or calendar events The one at the top is always expanded when possible bk USB debugging connected When you are finished with a notification remove it by touching and holding the notification and swiping to the right To dismiss all notifications touch the Dismiss icon at the top right of the notification shade At the top right corne
68. ot expressly approved by the party responsible for compliance could void the user s authority to operate the equipment e Use only a power source from a CSA Certified UL Approved Class 2 Power Supply suitable for use in a Health Care Facility This TV will operate on either AC or DC voltage range 18 to 32 volts e NOTE TO CATV INSTALLER This reminder is provided to call the CATV system installers attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Coax Cable Specifications The single coaxial cable on top of the TV is used to supply low voltage AC or DC power 28VAC or 24VDC and the RF signal to the television When using a central power supply cable selection is crucial Due to long coax cable runs encountered in hospital installations coax cable employing a solid copper center conductor and copper shield is required Cable run lengths MUST NOT exceed 150 feet Required coaxial cable numbers include Alpha 9804C non Plenum Belden 9248 non Plenum West Penn 806 non Plenum or West Penn 25806 Plenum which have been tested with coax powered TVs DANGER Arm Recoil Hazard The safety brake pin must remain in the SAFETY BRAKE PIN HOLE whenever the television is removed from the arm or when the arm is removed from the wall bracket to preve
69. ounts Location Security and Language From the Accounts amp sync screen touch Add Account Follow the screen instructions for setting up your account Accounts amp Sync Enable and disable its use e Add a corporate Exchange email calendar account e Add a POP3 email account PT geng Note This requires an email app to utilize Some apps Di may independently set up and maintain email accounts without the need for administrative involvement in setting up system level email accounts for example K9 Mail or Mail Droid Note this does not constitute an endorsement of these apps on the part of PDi Communication Systems Inc PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 Adding POP3 account Enter email address and password on the first screen If an IMAP or Exchange account is needed instead tap the Manual setup button and make the necessary adjustments Otherwise tap the Next button On the Account options screen there are a variety of options that can be tapped to enable disable and or select which include inbox checking frequency dropdown to select how often to check for new messages whether or not to use this account as the email default whether or not to receive email notifications whether or not to sync email for this account and whether or not to automatically download attachments Tap Next once the adj
70. out ia having to depend on PDi service personnel and or PC we Kees hosted solutions These updates provide bug fixes and or enhanced functionality To use the OTA facility an OTA configuration must be provided By default the OTA functionality is designed to e contact PDi servers to check for an update During periods G r Se ON of high traffic to PDi s network assets updates may take O About device an extended period to complete or may fail to complete due to insufficient bandwidth available for serving OTA requests If an OTA update fails to download try again during non peak business hours However it is possible for an administrator to configure a different OTA server at the direction of PDi service personnel or when hosting a local OTA server please contact PDi sales or service personnel to secure OTA update files as they become available To provide an alternative OTA configuration please input the following values 1 Tapthe Protocol button and tap the method of communication between the P14T and the OTA server By default hypertext transfer protocol HTTP is used and recommended The alternative choices are secured hypertext transfer protocol HTTPS file transfer protocol ftp local file resource an OTA archive must be present on the PDi device already or java archive resource an OTA archive is packaged as a jar file 2 Tapthe Server button and enter the name of the server to use If a non IP name is entered for ex
71. patient profiles l e my personal browsing habits credit card info etc will not be viewable by the next patient A Yes and each New User process cleans the device How do you address lost PIN codes A You have to select New User there is no mechanism to retrieve PIN What happens when power is disconnected Is the user profile saved in non volatile memory A Yes the profile is saved Why does the time show January 1 1970 around 12AM A The PDi Tab needs an active internet connection to get the correct time and date In some cases even with an active internet connection the network may be configured to block access to external time servers as a security precaution Once connected the date and number of minutes after the hour should be correct if access to a time server is permitted It is possible to manually set the time through the Settings app Why does the PDi Tab show the correct date and number of minutes after the hour but not the correct hour A By default the PDi Tab will set the time to Eastern Standard Time EST or Greenwich Mean Time GMT The PDi Tab lacks the necessary GPS and cellular radio technology that is typically used to establish a location needed for time zone calculations on smartphones and tablets The correct time zone time can be applied through the Settings App What is the recommended process for getting music pictures or video on to the PDi Tab for consumption A The recommended w
72. perating instructions should be read before the product is operated Keep these instructions The safety and operating instructions should be retained for future reference Heed all warnings All warnings on the product and in the operating instructions should be adhered to Follow all instructions All warnings on the product and in the operating instructions should be followed Do not use this apparatus near water for example near a bath tub wash bowl in a wet basement or near a swimming pool and the like Clean only with dry cloth Do not use liquid cleaners or aerosol cleaners Do not block any ventilation openings Install in accordance with the manufacturer s instructions The openings should never be blocked by placing the product on a bed sofa rug or other similar surface Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat DO NOT defeat the safety purpose of the polarized or grounding type plug This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point
73. preferred minimum volume 6 Press SETUP to return to the preceding menu Page 10 of 56 Color Temperature e Standard m Reddish m Greenish a Bluish u User Position A Y Exit SETUP Brightness Contrast Color Tint Color Temperature Sharpness PC Analog HDMI Picture Component Input Picture Noise Reduction Enabled Position V Exit SETUP OR OK Next Le Balance a BER e Minimum Volume 100 Maximum Volume 100 Power on Volume Last Internal Speaker Enable gt HDMI1 Audio Port HDMI 1 Android Audio Port Android Composite Sound Mode L R Volume Leveling gt Headphone Sound Mode Stereo Position A Y Exit SETUP OR OK Next Le PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 Maximum Volume PDI P14T User Manual Sets the maximum volume level the TV can reach 1 In Sound menu press the CHA CHY button to select Maximum Volume 2 Press the VOL VOL button to determine your preferred maximum volume allowed 3 Press the SETUP button to return to the preceding menu Power on Volume This screen allows the setting of the initial volume for the TV upon powering on set to any allowable level Note f Power on Volume is set to LAST and physical power is removed the TV will power on with a volume of zero 1 In Sound menu press th
74. r cable system This will prevent damage to the product due to lightning and power line surges PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 5 of 56 Table of Contents Installing Television nnnaannnnaannnnannnnennennrnnenrnrrnsrnnersnrrnsrnrrrsnrrnsnrnersnntrtntrrntrtnstntr r atrr s ArEEDAAEEnSAEEEDAAEEn EEEE anrr n Ennen annern neern nn een 8 Programming Menus And Getunp 9 Eege EE EA EE 9 D OU DT CE PR TR o oO e e O O A E EE EO 9 la A a O A 10 Noise Reductores 10 a AAA a de 10 BACE AAA O E E na 10 Ml APP A A Er ee EE 10 Maximum VOlUME oil ica 11 Bet STE On e UE rta naci tac anto cris 11 HAVEN lS De lo eege 11 Po Ce ne et ee eee ee nee 12 Eolo ound Oe cts A 12 NOMEN TC ue ec a nee E done o tee OT EME tee io 12 FIC ACIDS SOLO Ode 12 EE E eet 13 le PE AIEE V A EA E E S e e AI N A A 13 ARORO EE 13 RO DELE nano Suecia tito 14 al SO nice Leve laguna A ana 14 A ER A 15 PSE OO EE 15 KR E ln e o E ua num O un e e Pon lion 16 Televisi n RMS 61011 0 atc ae en ee ed ee ee ee ee D oo ee 16 MEPAAR IIN e a de an ere E de dt Ne 16 Ce PSN tata aiii 17 BOCK AUX OC EE 17 Parental LOCKE DU O RS taria 17 ca A 17 Seelen tie E a E ea a nta 17 Ee E e E 18 EE 18 teg Le 18 FS INS A A e eo OPS PE Eu AI 18 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX
75. r is the Application Drawer Icon Touching on this icon will open up a screen that contains the full list of all installed applications and widgets Please note that some applications and or widgets listed here are for use by the patient some are intended for use by those with administrative privileges and some are intended for use by service personnel The desktop by default will always show user accessible apps The user accessible apps not previously discussed include the following Adobe Reader Provides access to documents download onto the device by the user and or apps that are in the Portable Document Format PDF Calendar Shows dates in day week month or agenda format Please note that it takes administrative access to add events to the calendar as it requires the addition of an Exchange account DigiClock Settings Change the appearance of the clock widget on the desktop home screen System Profile Change between performance power saving and normal mode Timer Allows the user to see and add clocks from around the world to use a stopwatch and to use a timer countdown WipeUserData Permits the user to reset the device and start a new session with all their personal information removed and the device reset to institution default settings PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 29 of 56
76. roid PC ANALOG FM Radio USB Media 5 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Note The source must be enabled before it can be chosen as a power on source The Last entry causes the TV to power on to the Last source selected AS Exit SETUP OR OK PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 PDI P14T User Manual Page 22 of 56 System Diagnostics EE lagnostics This menu provides readouts of the TV s internal operation The Reset to Factory Defaults Diagnostics menu items are read only and cannot be changed Standby Power USE Cloning and FW Update 1 Enter the System menu RF Cloning and FW Update 2 Press CHA or CHY to highlight Diagnostics support 3 Press VOL to select it 4 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Field ON Hours Cumulative time TV is actually on Field Powered Hours Cumulative time TV is powered Position UM Firmware VSN 0 64 Micom VSN 0 4 Exit SETUP OR OK Next Le Power On Cause Normal Reset to Factory Defaults Firmware VSN This menu will allow you to reset all settings to the factory default Micom VSN settings Power on Cause Pro Idiom Disabled CCI MTI Status Disconnected Standby Power Field on Hours The choice between Low and normal standby power can
77. rsists use the Factory data reset option in the Setting app under Backup amp reset Personal section and check the box to erase SD card 13 Once the device is restore have the user create a new PIN reinstall data apps and or install the problematic app from a known good source 14 If the problem still persists call PDi support gt SS AAA NS PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 50 of 56 Q How do I enlarge the text for the patient who has limited visual abilities A Please perform following steps 1 Start the Settings app 2 Tap the Accessibility entry under the System section 3 Tap the Large text checkbox You should notice a change in the rendered font size This may cause some apps to have text that overruns their widget containers but hopefully will not impact app performance Q How do I help the patient who has limited dexterity to more accurately use the touchscreen and not move the shortcuts on the launcher desktop screen when they did not intend to do so 1 Start the Settings app 2 Tap the Accessibility entry under the System section 3 Tap the Touch hold delay entry and select the medium or long radio buttons Q Is patient education videos part of the image or can they be hosted on the network A Today no in the future yes it could be loaded on the device Q Can you incl
78. s and channels the auxiliary sources can be blocked too When the TV encounters an external signal source that is not appropriate per its settings a black screen appears with muted sound Note Parental Lock must be enabled for the sources to be blocked 1 Inthe Parental Control menu press CH A or CH Y to highlight Aux Block Source 2 Press VOL lt or VOL to select Unblocked or Blocked 3 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Parental Lock Duration This sets how long an enabled Parental Lock will be active 1 Inthe Parental Control menu press CH A or CH Y to highlight Parental Lock Duration 2 Press VOL or VOL gt to select the desired number of hours 1 99 or Always 3 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Parental Lock This enables or disables the settings in the Parental Control menu Enabling it will require the password to be entered to access the Parental Control menu in the future 1 Inthe Parental Control menu press CH A or CH Y to highlight Parental Lock 2 Press VOL or VOL to select Enable or Disable 3 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Power on Channel Displays a certain channel each time the TV is turned on This feature is useful for hospitals that have a Welcome Channe
79. sages by tapping on each field and entering the required ane information Tap Next after this information is entered or the default is accepted OK ER Account settings y Account setup Account options Your account is set up and email is on its way requency Automatic Push Pdi Exchange Next Automatic 4 Previous Send email from thus account by default z V Next utomatically download attachments when connected to Wi Fi PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Location Services Lets apps and services use data from GPS Wi Fi cellular network etc to determine location The P14T lacks a GPS sensor or cellular network radio so options related to these forms of connectivity are disabled Security Note Change PIN for securing Android unit Change lock time on Android unit after it goes E Ene CoNTGUTaTION to sleep nee Enable disable whether Power button locks unit Note this feature does not currently work and we are investigating possible fixes Settings i Display Storage for a future update cate Add inform ation about who OWNS the unit Ay Accounts sync Enable encryption of user data currently Location savions disabled security Enable disable whether or not the user can make passwords visible Enable disable whether certain apps services can take administrative act
80. ss VOL to change it See the table below for the settings of each attribute 6 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Position 4 Y Exit SETUP Attribute Settings Small Standard Large Default Font Style Style0 Style 7 Default Foreground Color White Black Red Green Blue Yellow Magenta Cyan Default Background Color White Black Red Green Blue Yellow Magenta Cyan Default Foreground Opacity Solid Translucent Transparent Flashing Default Background Opacity Solid Translucent Transparent Flashing Default Edge Style None Raised Depressed Uniform Left Drop Shadow Right Drop Shadow Default PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Edge Color White Black Red Green Blue Yellow Magenta Cyan Default Document Number PD196 251R2 PDI P14T User Manual Page 20 of 56 Digital Mode Time Setup Digital Mode Time Setup The current time will be set automatically from a digital channel signal provided by a broadcasting TV station E Eastern_ a Daylight Savings Auto 1 Enter the Features menu 2 Press CH A or CH Y to highlight Digital Mode Time Setup 3 Press VOL to select it 4 Press CH lt or CH to select your viewing area time zone Pacific Alaska Hawaii Newfoundland Atlantic Eastern Central or Mountain Press VOL A or VOL Y to highlight
81. t Y Send email from this account by default 2 Ifthe Server settings screen appears tap the Domain Username and Server fields to provide domain and server values for your Exchange account lf you are unsure of these values please contact your information technology ee pea 3 Ifa pop up screen is displayed asking you for permission to remotely control some security J Account setup features of Android decide whether or not to Server Settings allow such management It is required to be lt _ able to finish setting up the account If desired aver ane ms tap OK to complete setup or tap Cancel to stop a _ the account creation process e ia Next Y Use secure connection SSL 4 Inthe Account options screen there are a variety of options controlling inbox checking frequency number of days to sync email ce Ge whether to sync other forms of personal A information e g contacts and calendar Ee connected to Wi Fi and whether or not to receive notifications Tap Next once down making any desired modifications Y Accept all SSL certificates A Remote security administration 5 Onthe Your account is set up and email is on The server m outlook com requires that you allow it to remotely control some the way screen provide a name for this security features of your Android device Do you want to finish setting up this account email address is used as a default and account the name to use for outgoing mes
82. t already be allocated to another IP capable device on the network note this includes not only other P14T units on the network but any device capable of communicating to the P14T or other units on the network The IP address will need to be in IPV4 format e g a set of four octets separated by periods The IP address gateway IP address network prefix length and domain name server IP addresses must be known before starting this process If you do not have this information please consult your information for example 192 168 1 10 technology IT department To configure the device perform the following steps eS ee St 10 11 12 Access the Settings app and provide the administrative password Click on the Wi fi menu item under the Wireless amp Networks section Select a Wi fi network to connect to from the list of Wi fi networks on the right side of the app Tap the Show Advanced Options checkbox Tap the IP settings dropdown list box and tap on the Static entry Tap on the IP address field and enter the desired IP address Tap on the gateway field and provide the network s gateway IP address The gateway facilitates access to outside network resources such as the Internet Tap on the network prefix length and enter a value Tap on the DNS 1 entry and enter a value If you enter the value 8 8 8 8 you are asking for access to the Google Public DNS service which may or may not be suitable or allowed for the network wher
83. tien Le t l viseur ne n cessite pas d entretien p riodique autre que le nettoyage Ne jamais retirer le couvercle arri re du t l viseur cela peut vous exposer des points de tension dangereuse ou d autres risques Si le t l viseur ne fonctionne pas correctement le d brancher et appeler un centre de service autoris ou PDi Nettoyage et d sinfection Nettoyer l ext rieur de la t l vision en enlevant la poussi re avec un chiffon non pelucheux AVERTISSEMENT afin d viter d endommager la surface de la t l vision ne pas utiliser de produits abrasifs ou chimiques Effectuer un test ponctuel avec un nouveau produit d sinfectant en nettoyant une petite surface non vidente l arri re du meuble du t l viseur sur le clavier et sur le panneau LCD Laisser le d sinfectant tremper selon les instructions et puis essuyer Ne pas utiliser le d sinfectant si les surfaces de la t l vision r v lent un signe de d coloration ou de ramollissement Modification du produit Ne pas essayer de modifier ce produit de quelque facon que ce soit sans une autorisation crite Toute modification non autoris e peut annuler le droit de l utilisateur utiliser cet appareil Droit d auteur PDi Communication Systems Inc revendique des droits exclusifs sur le contenu de ce manuel de l utilisateur Ce manuel a t r dig titre d information pour l utilisateur et ne peut pas tre utilis pour fabriquer tout l ment montr
84. u To exit press SETUP until the programming menus disappear Power on ARC Mode The TV powers on with a set screen sized aspect ratio of 4 3 14 9 16 9 16 9 Panorama or Last 1 Enter the Features menu 2 Press CHA or CHY to highlight Power On ARC Mode 3 Press VOL to select 4 3 14 9 16 9 16 9 Panorama or Last 4 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Front Button Backlight Normal Brightness How bright you would like the backlight at all times Active Brightness How bright you would like the backlight when touched Each of these may be adjusted from 0 100 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX Document Number PD196 251R2 PDI P14T User Manual Page 21 of 56 OSD Language On Screen Display You can select the language you wish to use in your on screen displays 1 Press SETUP 2 Press CHA or CHY to select the OSD Language menu 3 Press VOL or VOL to select your desired language 4 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Sources Source Enable The TV s signal sources can be individually Enabled or Disabled The available sources in this menu correspond with the components you have connected to the TV s connectors Note Please disable all of the TV s sources that are not to be used TV that is switche
85. ude a lock out feature so it does not update automatically A Yes today Android does not automatically update f w Q Can you use a remote or is it only by touch screen A Yes the PDi remotes will work with the TV functions while the touch screen works only with the Android functions Q How do you control applications loaded on the device A One of the key security features on the P14 Tab is the Applocker Service Application An administrator can use this application to lock other applications installed on the device There are some applications that are locked by default one of them is the Package Installer Application the application that can load install applications on the device So by default no apps can be installed on the device Q How do l install my commercial apps on the P14T master device A Please see the section on how to install apps on the P14T Q Why does creating a new user take so long A The time taken for a new user can be longer than usual depending on the size of the clone file See the question What is recommended way for cloning tablet on how to avoid unnecessarily large clone files Q What is the recommended way for cloning the tablets The following steps are recommended when creating a master clone file 1 For the master device full factory reset the device is also check the Erase SDcard option from under settings gt Backup and Reset 2 Login from the welcome screen and
86. urce Enable menu the Android Module is set to Enabled Waking Selecting e f Android is sleeping a short touch of the power button will turn on the P14T The power indicator light should change from red to green e f Android is not the source displayed change to the Android source by using the Guide or the channel up and down front panel buttons Unlocking e Unlock the Andoid by entering the User Password See Lock Screen section below for entering password or selecting new user Locking A short touch of the power button puts the android to sleep and will lock Android requiring user password to unlock Rebooting A long touch of at least eight seconds of the power button reboots the android Interacting with Android TOUCH 8 TYPE When in the Tablet Android mode the screen can be used to provide inputs by touching and or typing on it To select or activate something touch it To type something such as a name password or search terms just touch where you want to type A keyboard pops up that lets you type into the field Other common gestures include e Touch amp hold Touch 4 hold an item on the screen by touching it and not lifting your finger until an action occurs e Drag Touch amp hold an item for a moment and then without lifting your finger move your finger on the screen until you reach the target position For example you can move apps around on the Home screen e Swipe or slide Quickl
87. ustments are made or the defaults are accepted 4 On the Your account is set up and email is on the way screen provide a name for this account email address is used as a default and the name to use for outgoing messages by tapping on each field and entering the required information Tap Next after this information is entered or the default is accepted PDI P14T User Manual Page 37 of 56 Le Account setup Email account You can set up email for most accounts in just a few steps PdiPdi40 gmail com Manual setup KR Account setup Account type What type of account is this Previous IMAP Exchange wy Account settings Account options Inbox checking frequency Every 15 minutes Previous Send email from this account by default Y Notify me when email arrives Next Sync email from this account Y Automatically download attachments when connected to Wi Fi y Account setup Your account is set up and email is on its way PDi Gmail Next PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 251R2 PDI P14T User Manual Page 38 of 56 y Add an Exchange account Adding Exchange account Email account 1 Enter email address and password on the first You can set up an Exchange account in just a few steps screen and tap whether or not to use this gt a account as the default email sending account reest Tap Next O CO Nex
88. where they exit from the product Attachments Only use attachments and accessories specified by the manufacturer 12 Use only with the cart stand 13 14 16 17 tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions Oxygen Environment Do not use in an oxygen tent or oxygen chamber Such use may cause a fire hazard Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna o
89. y move your finger across the surface of the screen without pausing when you first touch so you don t drag something instead For example you can slide a Home screen left or right to view the other Home screens e Double tap Tap quickly twice on a webpage map or other screen to zoom For example double tap a picture in Chrome to zoom in and double tap again to zoom out e Pinch In some apps such as Browser and Gallery you can zoom in and out by placing two fingers on the screen at once and pinching them together to zoom out or spreading them apart to zoom in Warning Unlike most android devices this TV will not rotate Attempting to do so may result in damage to the arm and or unit Lock Screen The starting point for almost all users would be the lock screen except when turning on the device the first time or after a factory reset in which case the device will open to the welcome screen On the lock screen existing users would need to enter their password to continue A new user would start by touching the I m a new user button PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 DA Document Number PD196 251R2 PDI P14T User Manual Page 25 of 56 Switching from one user to the another Device Cleanup When switching to a new user the P14T will erase any data used by the previous patient This step should be done for Device Cleanup Informatio
90. ystems Inc PDI warrants to the original purchaser only that the PDI P14T hardware will be free from defects in materials and workmanship under normal use for 2 years from the date of original purchase This warranty does not cover any other equipment that may have been included with PDi s shipment of this product After receipt of written notice of a defect or malfunction occurring during the warranty period PDi will repair or replace goods returned to its Springboro Ohio location at its discretion free of charge to the original purchaser the whole or any component part of any product manufactured by PDi and found by PDi to be defective in workmanship or materials As a condition to obtaining warranty service written notification must be received by PDi within ten 10 days after defect is first observed Repair of said product requires it to be shipped to the PDi factory in Springboro Ohio All shipments shall be F O B Springboro Ohio and all shipping and freight charges to PDi s factory shall be paid by the customer This warranty shall not apply to any PDi products subjected to improper use negligence or accident nor to tampering alterations or repairs by others without PDi s specific prior written authorization For information regarding authorized servicing and all other information pertaining to this warranty please contact PDi COMMUNICATION SYSTEMS at 40 Greenwood Lane Springboro Ohio 45066 or phone 937 743 6010

Download Pdf Manuals

Related Search

Related Contents

  Bedienungsanleitung MT/UMT-Waagen  nuovomanuale FA it_ENG 396x297_Atex cat3  Energy Sistem Photo Frame M10  Man. M-150 PLUS  

Copyright © All rights reserved. Failed to retrieve file