Operating Instructions - Clements Air Conditioning
Contents
1. Do not touch the sharp aluminium fin sharp parts may cause injury to avoid injury etc Do not switch ON the indoor unit when waxing the floor After waxing aerate the room properly before operating the unit Do not install the unit in oily and smoky areas to prevent damage to the unit Do not dismantle the unit for cleaning purpose to avoid injury Do not step onto an unstable bench when cleaning the unit to avoid injury Do not place a vase or water container on the unit Water may enter the unit and degrade the insulation This may cause an electric shock Do not open window or door for long time during COOL DRY mode operation D Prevent water leakage by ensuring drainage pipe is Connected properly Kept clear of gutters and containers or Not immersed in water After a long period of use or use with any combustible equipment aerate the room regularly After a long period of use make sure the installation rack does not deteriorate to prevent the unit from falling down Remote control Do not use rechargeable Ni Cd batteries It may damage the remote control 9 Q Power supply S To prevent malfunction or damage of the remote control Remove the batteries if the unit is not going to be used for a long period of time e New batteries of the same type must be inserted following the polarity stated Do not disconnect the plug by pulling the cord t2. For clock setting please refer to Quick guide Note AUTO ECONAVI POWERFUL QUIET COMFORT NANOE G e Can be activated in all modes and can be cancelled by pressing the respective button again AUTI ECONAVI POWERFUUQUET CONFORT e Cannot be selected at the same time e Cannot be activated during MILD DRY COOLING How to use English To learn more AUTO During operation mode selection the POWER indicator blinks e Unit selects operation mode every 10 minutes according to setting temperature and room temperature HEAT Unit takes a while to warm up The POWER indicator blinks during this operation COOL Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode DRY Unit operates at low fan speed to give a gentle cooling operation FAN To circulate air in the room nanoe G in filter deactivation Depending on the unit s accumulated operation time nanoe G in filter deactivation may activate only once a day after the unit turned off To remove the moisture left in the internal parts the fan will operate for 30 minutes with louver opened slightly This process only applicable when the unit is operated in COOL DRY mode before turned off Then nanoe G deactivates viruses bacteria on the filter for 2 hours with fan stopped and louver closed Do not turn off the power supply during this operation After power failure this operation will not resu
3. Press to restore the LOrE remote control to o e o default setting PAE Not used in normal So operations To select fan speed Remote control display AUTO gt gt a gt aaf asii antil e For AUTO the indoor fan speed is automatically adjusted according to the operation mode L release AN5 Use when remote control is misplaced or a malfunction occurs Raise the front panel To use in AUTO mode press the button once To use in COOL mode press and hold the button until 1 beep is heard then To use in HEAT mode press and hold the button until 1 beep is heard then release And press again until 2 beeps are heard then release e Press the button again to turn off AUTO COMFORT Te 4 A o maximise comfort 2 lt AUTO COMFORT NANOE G L3 To purify the air 5e lt NANOE G nanoe G starts automatically when the unit is turned on with ea e Can be activated even when the unit is turned off In this condition the unit will operate as a fan with AUTO fan speed and louver swing To deactivate viruses bacteria on the filter S NANOE G POWER After the unit is turned off the nanoe G in filter deactivation may activate up to 150 minutes Turning on the unit cancels this operation e To disable this operation in the future press and hold CJ until a short beep sound is heard This will not disable the nanoe G to purify the air e To restore the nanoe G in filter dea
4. ONER MILD DRY MODE gt 2POWER e Please note that the OFF ot J indication OFF is on to start emia Select the desired EMP temperature e Mm e Selection range 16 C C ve 30 C Not applicable for FAN TIMER mode On SET e Operating the unit within the 1 2 3 E ca en recommended temperature e may save energy a Gita Wes HEAT 20 C 24 C Panasonic COOL 26 C 28 C DRY 1 C 2 C lower than room temperature e The set temperature selection range can be customized according to requirement Please consult authorised dealer INVERTER VALA Un N e To dim or restore the unit s sy indicator brightness press 4 and hold for 5 seconds e Use remote control within 8 m from the remote control receiver of the indoor unit oe The illustrations in this manual are for explanation purposes only and may differ from the actual unit They are subject to change without notice for future improvement Table of contents Safety precautions 4 5 HOW tO USC iiien 6 7 To learn MOTS woe eee 8 9 Cleaning instructions 10 Troubleshooting 0 eee 11 Information ssiri Back cover Accessories Remote control AAA or RO3 batteries x 2 e Remote control holder e Screws for remote control holder x 2 English Safety precautions To prevent personal injury injury to others or pro
5. Panasonic Operating Instructions Air Conditioner Model No Indoor Unit Outdoor Unit CS E7PKR CU E7PKR CS E9PKR CU E9PKR CS E12PKR CU E12PKR CS E15PKR CU E15PKR CS E18PKR CU E18PKR CS E21PKR CU E21PKR CS E24PKR CU E24PKR CS E28PKR CU E28PKR Ja LL Operating Instructions Air Conditioner Thank you for purchasing Panasonic Air Conditioner Installation instructions attached Before operating the unit read these operating instructions thoroughly and keep them for future reference F569361 English Provide maximum comfort clean air and optimise energy saving ECONAVI and AUTO COMFORT Equipped with the human activity sensor the air conditioner ensures to deliver cool or warm air to you and keeps the room consistently comfortable with minimum energy consumption See To learn more for details nanoe G Deactivates harmful micro organisms such as viruses bacteria etc to keep air clean It also deactivates viruses and bacteria on the filter to keep inside of the unit clean Quick guide Inserting the batteries Pull out the back cover of remote control Insert AAA or R03 batteries can be used 1 year Close the cover Clock setting C Press CLOCK Set the time Confirm a O AC c SET CHECK CLOCK RESET Panasonic GNVERTER Basic operation C Select the desired mode ees gt HEAT FAN lt DRY lt COOL Start stop the operation AIR CONDITI
6. both sides the front panel a Close down For CS E18PKR CS E21PKR CS E24PKR CS E28PKR Press at center of the front panel Indoor unit Front panel Aluminium fin Human activity sensor od Air filters nanoe G Generator Every 6 months e Clean with dry cotton bud e Do not touch during operation Air filters Every 2 weeks e Wash rinse the filters gently with water to avoid damage to the filter surface e Dry the filters thoroughly under shade away from fire or direct sunlight e Replace any damaged filters Remove air filter Attach air filter Insert into the unit For seasonal inspection after extended non use e Checking of remote control batteries e No obstruction at air inlet and air outlet vents e Use Auto OFF ON button to select COOL HEAT operation After 15 minutes of operation it is normal to have the following temperature difference between air inlet and air outlet vents COOL 28 C HEAT 2 14 C For extended non use Activate HEAT mode for 2 3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth e Turn off the power supply and unplug e Remove the remote control batteries Troubleshooting The following symptoms do not indicate malfunction Symptom Cause Mist emerges from indoor unit Condensation effect due to cooling process Water flowing sound durin
7. ctivation press and hold CJ until a long beep sound is heard arswinc TO adjust airflow direction Remote control display a AU es So A v 4 q gt AUTO SS SS N e Keeps the room ventilated e In COOL DRY mode if AUTO is set the louver swings left right and up down automatically e In HEAT mode if AUTO is set the horizontal louver is fixed at the predetermined position The vertical louver swings left right after the temperature rises Do not adjust the louver by hand See To learn more To set the timer for details 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times eT r TMERRI 1 ie C Select ON or OFF timer e Each time pressed 9 P OP Canel Set the time Example OFF at 22 00 alz OFF ZIN 75 hha a401 TI r 4 Or a ww Confirm ED ccs e To cancel ON or OFF timer press or oF to select respective 1 or 2 then press ma e If timer is cancelled manually or due to power failure you can restore the timer again by pressing 0 or to select respective 1 or 2 then press SE e The nearest timer setting will be displayed and will activate in sequence When ON Timer is set the unit may start earlier up to 35 minutes before the actual set time in order to achieve the desired temperature on time e Timer operation is based on the clock set in the remote control and repeats daily once set
8. g operation e Refrigerant flow inside the unit The room has a peculiar odour e This may be due to damp smell emitted by the wall carpet furniture or clothing Indoor fan stops occasionally during automatic fan speed setting e This helps to remove the surrounding odour Airflow continues even after operation has stopped e Extraction of remaining heat from the indoor unit maximum 30 seconds Operation is delayed a few minutes after restarting e The delay is a protection to the unit s compressor Outdoor unit emits water steam Condensation or evaporation occurs on pipes TIMER indicator is always on e The timer setting repeats daily once set POWER indicator blinks during HEAT mode with no warm air supply and louver is closed e The unit is in defrost mode and AIR SWING is set to AUTO Indoor fan stops occasionally during heating operation e To avoid unintended cooling effect POWER indicator blinks before the unit is switched on e This is a preliminary step in preparation for the operation when the ON timer has been set Cracking sound during operation e Changes of temperature caused the expansion contraction of the unit 2 or more human activity indicator turns on simultaneously e Judgement of heat source and movement area in progress POWER indicator blinks 3 seconds ON and 0 5 seconds OFF during operation e The unit is in Demand Resp
9. me ECONAVI and AUTO COMFORT AUTO ECONAVI COMFOR Note LJ a ainswing When manual AIR SWING is selected The unit will start to initialise gt The human activity sensor the ECONAVI and AUTO COMFORT for approximately 1 minute and the sunlight sensor will operations will be cancelled start to detect Human activity sensor operation ECONAVI Detecting human presence and activity the unit controls room temperature to save energy Mode Human Low activity Normal activity High activity Absent 2 Cm COOL DRY 1 C Set temperature gt HEAT 2 C AUTO COMFORT Detecting human presence and activity the unit controls room temperature to keep human comfortable consistently Mode Human Low activity Normal activity High activity Absent 2 C m C et 0 3 C COOLDRY temperature gt el 205669 soeesonc oocs BER SERRREES E F 2 C HEAT fa 1 tap a O E a Medium Fan ECONAVI and AUTO COMFORT Precise control of temperature during low activity to maximise energy saving Mode Human Low activity ECONAVI and AUTO COMFORT take advantage of the human nature that human being takes time to feel the temperature rise during low activity level the unit adjusts temperature to maximise energy saving without sacrificing the comfort Set eConne temperature gt During low activity fan speed 1 tap up for first 15 minutes or un
10. o prevent electric shock Safety precautions English How to use ECONAVI C To optimise energy saving ECONAvV To select operation mode AUTO For your convenience HEAT To enjoy warm air COOL To enjoy cool air DRY To dehumidify the environment FAN To circulate air in the room To improve humidity and MILD DRY moisture level e This operation reduces air dryness and provides you with a comfortable living environment during COOL mode only e When vertical airflow direction is set to AUTO it stops at lower position to avoid cold air contact However you can adjust the louver direction manually powerruvauet TO Switch between powerful amp quiet gt POWERFUL gt Quien NORMAL POWERFUL To reach temperature quickly 5e POWERFUL e This operation stops automatically after 4 hours QUIET To enjoy quiet operation z QUIET e This operation reduces airflow noise Auto OFF ON button Human activity aaa sensor and indicator 5 z Sunlight sensor J and remote control receiver Indicator Green POWER Green Remote control TIMER Orange display e autocomFoRT Green NANOE G Blue AIR CONDITIONER POWERFUL Orange wp QUIET Green ZT AUTO UC eLA FAN Press and hold for approximately 10 seconds to show temperature setting in POWERFUL QUIET SWING C or F r TIMER p oN G0 1 2
11. onse Mode Check the following before calling for servicing Symptom Check Operation in HEAT COOL mode is not working efficiently Set the temperature correctly e Close all doors and windows e Clean or replace the filters e Clear any obstruction at the air inlet and air outlet vents Noisy during operation e Check if the unit has been installed at an incline e Close the front panel properly Remote control does not work Display is dim or transmission signal is weak e Insert the batteries correctly e Replace weak batteries The unit does not work e Check if the circuit breaker is tripped e Check if timers have been set The unit does not receive the signal from the remote control e Make sure the receiver is not obstructed e Certain fluorescent lights may interfere with signal transmitter Please consult authorised dealer NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY AND UNPLUG then please consult authorised dealer under the following conditions Abnormal noise during operation e Water foreign particles have entered the remote control e Water leaks from Indoor unit e Circuit breaker switches off frequently e Power cord becomes unnaturally warm e Switches or buttons are not functioning properly The unit stops and the TIMER indicator blinks Use remote control to retrieve error code Press for O Press until you 5 seconds Con i D
12. ower plug should be periodically wiped with a dry cloth Stop using the product if any abnormality failure occurs and disconnect the power plug or turn off the power switch and breaker Risk of smoke fire electric shock Examples of abnormality failure e The ELCB trips frequently e Burning smell is observed e Abnormal noise or vibration of the unit is observed e Water leaks from the indoor unit e Power cord or plug becomes abnormally hot Fan speed cannot be controlled e The unit stops running immediately even if it is switched on for operation e The fan does not stop even if the operation is stopped Contact your local dealer immediately for maintenance repair This equipment must be earthed to prevent electrical shock or fire T gt Prevent electric shock by switching off the power supply and unplug Before cleaning or servicing When extended non use or During abnormally strong lightning activity A N CAUTION Indoor unit and outdoor unit S Do not wash the indoor unit with water benzine thinner or scouring powder to avoid damage or corrosion at the unit Do not use for preservation of precise equipment food animals plants artwork or other objects This may cause quality deterioration etc Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation Do not expose plants or pet directly to airflow
13. perty damage please comply with the following Incorrect operation due to failure to follow instructions below may cause harm or damage the seriousness of which is classified as below This sign warns of death or serious injury A WARNING This sign warns of injury or damage to property AN CAUTION The instructions to be followed are classified by the following symbols This symbol denotes an action that is PROHIBITED These symbols denote rice actions COMPULSORY Power supply Air inlet Remote control Outdoor unit A N WARNING Indoor unit and outdoor unit This appliance is not intended for use by Q persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Please consult authorised dealer or specialist to clean the internal parts repair install remove and reinstall the unit Improper installation and handling will cause leakage electric shock or fire Confirm with authorised dealer or specialist on usage of any specified refrigerant type Using refrigerant type other than the specified may cause product damage burst and injury etc Do no
14. r hear beep sound 1 4 2 9 then write down Ore D i ee the error code Press for LERES E 5 seconds SOE Oe a 4 Turn the unit off to quit and reveal the checking error code to authorised dealer e For certain errors you may restart the unit for limited operation with 4 beeps when operation starts Cleaning instructions Troubleshooting English 11 Information English Information for Users on Collection and Disposal of Old Equipment and used Batteries Information on Disposal in other Note for the battery symbol bottom Countries outside the European two symbol examples Union This symbol might be used in wag hese symbols are only valid in the combination with a chemical symbol these items please contact your local requirement set by the Directive for the authorities or dealer and ask for the chemical involved European Union If you wish to discard et In this case it complies with the correct method of disposal Pb Panasonic Corporation Website http panasonic net Panasonic Corporation 2013 F569361 Printed in Malaysia FA0413 0
15. sunlight sensor detects COOL DRY e sunlight intensity during ae ture Se ee peng weather or day night emperature h dth nit just HEAT changes and the unit adjusts 1 C temperature e In a room without window or with thick curtain the sunlight sensor will judge as cloudy night Operation conditions Use this air conditioner under the following temperature range DBT Dry bulb temperature WBT Wet bulb temperature Temperature C Indoor Outdoor P DBT WBT DBT WBT Max 32 23 46 26 ee Min 16 11 5 4 Max 30 z 24 18 HEAL Min 16 2 15 16 To learn more English 10 Cleaning instructions To ensure optimal performance of the unit cleaning has to be carried out at regular intervals Dirty unit may cause malfunction and you may see error code H99 Please consult authorised dealer Switch off the power supply and unplug before cleaning e Do not touch the aluminium fin sharp parts may cause injury Do not use benzine thinner or scouring powder e Use only soap pH 7 or neutral household detergent Do not use water hotter than 40 C Wipe the unit gently with a soft dry cloth Human activity sensor Do not hit or violently press or poke it with a sharp object This can lead to damage and malfunction Front panel Wash gently and dry Remove the front panel Close it securely Insert at Press both ends of
16. t install the unit in a potentially explosive or flammable atmosphere Failure to do so could result in fire Do not insert your fingers or other objects into the air conditioner indoor or N outdoor unit rotating parts may cause injury Do not touch the outdoor unit during lightning it may cause electric shock Do not expose yourself directly to cold air for a long period to avoid excess cooling Do not sit or step on the unit you may fall down accidentally Remote control Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries Power supply Do not use a modified cord joint cord extension cord or ES unspecified cord to prevent overheating and fire To prevent overheating fire or electric shock Do not share the same power outlet with other equipment e Do not operate with wet hands Do not over bend the power supply cord Do not operate or stop the unit by inserting or pulling out the power plug If the supply cord is damaged it must be replaced by the manufacturer service agent or similarly qualified persons in order to avoid a hazard It is strongly recommended to be installed with Earth Leakage Circuit Breaker ELCB or Residual Current Device RCD to prevent electric shock or fire To prevent overheating fire or electric shock e Insert the power plug properly Dust on the p
17. til set temperature is reached During human absence maximum fan speed for COOL DRY mode is medium fan The human activity sensor will also scan for area of heat source and movement in a room Detection area Human activity indicator wy S97 om it io it AN AE tH At left area At center multiple area At right area 120 7m The unit judges human activity area for a few seconds before indicator updates Based on area activeness horizontal airflow direction louver will adjust either fix at predetermined position or swing left right periodically e The human activity sensor performance is influenced by indoor unit location movement speed temperature range etc e The human activity sensor may mistakenly detect an object with heat source amp movement similar to human such as pets etc mistakenly detect as non heat source amp movement if a human stays motionless for certain period of time Do not place large objects near the sensor and keep away heating units or humidifier from the sensor s detection area They may cause sensor malfunction Sunlight Sensor operation ECONAV 1 is activated ECONAVI Detecti light intensity the unit adjust temperature to e energy Detecting sunlight intensity the unit adju perature to save energy SRNR RAIMA Ambient condition temperature until a high Mode ae kad a sunlight intensity is detected 1 C The
Download Pdf Manuals
Related Search