User`s Manual (EN) - Avitech International Corporation
Contents
1. A 4 AVITECH Scenario 1 In case of overlaying Source windows switching of control will occur when the mouse cursor has left the area where the 2 Source windows overlay Scenario 2 In case one of the window is set at Full screen in background layout right click a window then click Full screen then click Full screen in background using the Phoenix G software or press Home hot key disable Full screen in background for Surfer feature to function properly Surfer Feature on Full Screen Source Window Below figure shows possible Source window control switching action upon moving the mouse to the sides of the window Moving the mouse from one Source window to the next transfers control from the former window to the latter one No Source window control switching action will occur when moving the mouse to the top and bottom of the window Source 1 r window Source 4 window Source 1 Source 3 Source 4 window window window window Figure A 5 Surfer Feature on Full Screen Source Window Surfer Feature on Cascaded System Below figure shows a sample 3 Sequoia 4H cascaded system The Surfer feature is confined within each Sequoia only refer to the abovementioned illustrations on using the Surfer feature in each Sequoia To shift control from a Source window to the Source window of another Sequoia2. Edited chapter 2 portion new switching control and pop up 1 0 3 5 11 2012 icon behavior Added Ctrl X hotkey to chapter 2 portion 1 0 4 5 48 2012 Replaced all front rear photos Changed the specs table s output voltage to 30 W Revision No AVITECH 1 0 5 1 0 6 1 0 8 9 22 2012 9 29 2012 6 5 2012 6 15 2012 7 9 2013 7 16 2013 8 28 2013 11 14 2013 11 21 2013 1 24 2014 2 13 2014 Changes Applied Copied the illustration from NAB PPT product presentation PDF format Removed all mention of 10 bit and 12 bit input format support Removed all mention of Host appearing in all application diagrams Added optional to All in one cable in package contents portion Changed all mention of All in one cable connector to 5 in one cable connector Added new hot key functions Added Shift P hot key info Changed Shift P to Shift L hot key info Added the rack mount kit items to Package Contents portion Added Appendix C Resetting to Default Setting portion Added Surfer function and detection of no USB mouse will cause host cursor to disappear from screen feature Added note to Surfer function description Added various Surfer function limitations Added new appendix on Surfer feature and updated various portions vi Warranty Avitech International Corporation herein after referred to as Avitech warrants to the original purchaser of the produc
3. Sequoia 4 AVITECH ae O E sy PWR 1 3 MODE 2 4 Sequoia 4H One of a kind multiviewing Revision 1 0 8 March 2014 AVITECH ABOUT THIS MANUAL This manual contains information on how to use the Avitech Sequoia 4H mouse keyboard controller There are three chapters in this manual v Getting Started introduces the features and specifications as well as the external components of the Avitech Sequoia 4H Y System Configuration discusses the process of setting up the Sequoia 4H v Basic Operations introduces the two types of operating modes Also demonstrates use of the mouse and keyboard hot keys to perform basic operations and its compatibility with the touch screen display with Avitech Sequoia 4H The following conventions are used to distinguish elements of text throughout the manual E provides additional hints or information that requires special attention A identifies warnings which must be strictly followed Any name of a menu command icon or button displayed on the screen is shown in a bold typeset For example On the Start menu select Settings To assist us in making improvements to this user manual we welcome any comments and constructive criticism Please email us at sales avitechvideo com WARNING Do not attempt to disassemble the Sequoia 4H Doing so may void the warranty There are no serviceable parts inside Please refer all servicing to qualified personnel TRADEMARKS All brand and pro
4. To switch operation to a remote computer move the Host cursor into a specific window on the screen and then click the d enter icon or double click the left mouse button Remote operation mode works with computers only Remote operation mode cannot be entered on other video sources e g Blu Ray players When Remote operation mode is active use mouse and keyboard to operate a single computer Note The computer is displayed within a window on the monitor When in Remote operation mode the master Sequoia 4H automatically transfers the mouse and keyboard control to the selected computer To switch back to the Host operation mode use the keyboard hot key Pause Break The Host cursor Should reappear 11 AVITECH 3 1 Host Operation Mode In this mode you can monitor up to four screens or double click the window of a computer to be controlled The following are the basic operations that can be performed in Host operation mode 3 1 1 Pop up Selections Upon moving the Host cursor to the top right corner of a particular window the following pop up selections appear N S E S swap window l enter a computer window Ez full screen Wx return from full screen 3 1 2 Functions When the Sequoia detects that a particular computer s USB or PS 2 port is not connected then the enter pop up icon will not show on that window Note only USB connections are ho
5. Ctrl S preset will be loaded Note Also saves latest presets for cascaded modules When a video signal does not fill up the entire frame a black border fills in Ctrl X the empty space that is left behind Pressing Ctrl X crops the black bars When applying this function make sure the image does not have a black or dark grey background to avoid cropping part of the actual image Ctrl Y Redo redo up to ten previously undone actions Ctrl Z Undo undo up to ten previous actions Ctrl Shift Alt R F F1 F4 Home Page Up Page Down Shift F F1 F4 Shift I Reset the cascaded module s system configuration only Access a remote computer F represents keys F1 to F4 F1 corresponds to the source 1 window and F2 source 2 etc Note Window can also be selected by double clicking it Upon selection enters Remote operation mode of the selected window Window swapping can be enabled from the Phoenix G Galaxy control software While in Phoenix G go to Sequoia Properties and check the Swap with Active Window parameter While in full screen mode toggle between full screen in foreground and full screen in background Switch between the three factory default presets Access a remote computer with active window swapping F represents keys F1 to F4 F1 corresponds to source 1 F2 source 2 etc You can also hold Shift and Double Click the mouse on the desired window for the same effect
6. For example if user is currently in control of Source 1 computer window of Sequoia 1 while in Remote operation mode and wishes to switch control to Source 1 computer window of Sequoia 2 perform the following Step 1 Press Pause Break key or double click the middle wheel mouse button to exit Remote operation mode and enter Host operation mode Control of Source 1 computer window of Sequoia 1 has now been disengaged Step 2 Move the Host cursor to the right edge of the display of Sequoia 2 to allow it to jump to left edge of the display of Sequoia 3 still in Host operation mode but this time location of Host cursor is now in Sequoia 3 Pressing Tab key can also move Host cursor from Sequoia 1 display to Sequoia 2 display Tab key only moves in a clockwise cascaded direction to move in a counterclockwise cascaded direction the mouse cursor has to be moved to the left edge of the display Step 3 Move the Host cursor over the top right portion of Source 1 computer window of Sequoia 2 to click the 1 symbol on the pop up menu 4 E Or double click the left mouse button on the desired window to switch control to it enter Remote operation mode The Surfer feature can now be used within Sequoia 2 20 Monitoring made easy AVITECH Sequoia 1 Sequoia 2 Sequoia 3 asp ETna Sequoia 3 Surfer feature works Surfer feature works Surfer feature works
7. HDMI or DVI Signal in e 2 v S Y KVM Connection KVM Connection KVM Connection Remote Control via Avitech Hook Laptop or Desktop Computer i All in one Printer Scanner Computer 1 Computer 2 Computer 3 Computer 4 Figure 2 2 Sequoia 4H with Touch screen Display Setup Step 1 Connect the 5 in 1 cable to first computer s USB or PS 2 port and then connect the 5 in 1 cable to its audio ports mic in audio out Connect other end of 5 in 1 cable to the Sequoia s source 1 port DB15 connector at rear panel Repeat this process for all subsequent computers E 1 We highly recommend using a USB connection instead of a PS 2 connection when available In case no USB connection is available and a PS 2 connection must be utilized make sure to first power on the Sequoia 4H then turn on the computer afterwards 2 For Windows 2000 users Upon connecting the Sequoia via USB for the first time to the computer perform the windows on screen steps to initialize the USB connection Step 2 Connect a HDMI or DVI via a DVI to HDMI adapter display to the HDMI OUT port on the Sequoia s rear panel Step 3 Connect the first computer s HDMI or DVI via an adapter output to the Sequoia s HDMI IN 1 port through a HDMI cable Repeat this process for all subsequent computers Step 4 Connect the mouse and keyboard to the mouse keyboard USB ports located on the Sequoia 4H front panel When connec
8. Upon selection enters Remote operation mode of the selected window Note When the parameter inside the Phoenix G Galaxy software Swap with Active Window is enabled with checkmark then the functions of F and Shift F switch Thus the hot key Shift F will not cause swapping F will cause swapping Switch audio input source between HDMI IN and source ports The audio tally B red shows that audio output is coming from a particular window 13 AVITECH SCC Shift L Shift O Shift Shift gt Tab gt 2 Toggle priority of overlay windows on off upon clicking a window will not cause the window to become the topmost window Switch the audio output between the Sequoia s internal speakers and the HDMI OUT port Note This function is not available when connected to the HDMI OUT port via a DVI to HDMI converter Due to subtle differences in processing times the audio and video may need to be re synced This is done by adjusting the audio delay The Sequoia 4H provides up to 170 milliseconds of audio delay adjustment Use Shift to decrease delay and Shift gt to increase delay red LED Move the Host cursor from one display monitor to the next applicable only during cascading Decrease increase the volume level 10 levels including mute a green LED Load the previous user created preset file Note Use the Phoenix G Galaxy contr
9. borders of the screen SAAN Avitech Rack Mount Asse Pet Aamos 90 Pare Qued T Figure A 2 Surfer Feature on Default Preset 1 RalarancaE ee P rax woos D ppm te fh biter L2 mad fo YY Yew As Avitech Rack Mount Asser Por Reinier 3G Phus Gued Tita gt BUNT PA M oT Dr 2 G a TEEI LEI EGL SOURCE 1 Figure A 3 Surfer Feature on Default Preset 2 18 Monitoring made easy AVITECH A Town 50 Mack dour Reser bty Me s ease Culde wr spoon DOCI Apr babe Fencdes Pro Refarance Avitech Rack Mount Asse 3 Por Reinier 35 Plus Qued Til 4 tat 6 p AR O a Ge ec Be TEEI LA lt gt SOURCE 1 Figure A 4 Surfer Feature on Default Preset 3 A 2 Surfer Feature on Non uniform Quad Layout Below figure shows possible Source window control switching actions Moving the mouse from one Source window to the other transfers control from the former window to the target window No Source window control switching action will occur upon moving the mouse to the window sides without arrow and shaded area indicators A A A y Z A y A A 4 A Z h Avitech Rack Mount Asser Pot Ape 10 Para Quer the ele n Kal r e e a Sourced pC 7N WY ss N RA RA AA oo Ylssstisidivitin bens ws b gt gt RRR DRAA Figure A 5 Surfer Feature on Non uniform Quad Layout 19 A 3
10. 2013 V1 00 g9 04 11 2012 V5 01 g0 04 01 2013 Control Board V1 00 17 12 24 2013 Upper Board FPGA V1 00 g9 04 11 2012 ST V5 01 g0 04 01 2013 Software Utility Phoenix G V1 03 or later V1 03 or later Hook V1 06 V1 06 USB Touch Tool V1 03 V1 03 Avitech Control Panel ACP V2 04 V2 04 ASCII Test V4 3 V4 3 USER MANUAL HISTORY Revision No Changes Applied 1 0 0 4 28 2011 First version Replaced 3 sample illustrations of labels on 4 windows 5 13 2011 should be no transparency background width must be the same as window s width 6 24 2011 Added touchscreen portion 7 8 2011 Edited package contents portion 7 15 2011 Edited package contents and software features portions Added effect of enabling disabling Phoenix G s Sequoia 8 1 2011 Properties Swap With Active Window on F or double click and Shift F or Shift double click hot keys Placed emphasis on press Ctrl Esc before connecting via 8 5 2011 Phoenix G Added audio tally on off on chapter 2 Using the Mouse 8 22 2011 Added Cascading portion Added a missing step 3 to the H W installation portion in 8 24 2011 chapter 1 ordinary monitor touch screen monitor and cascading portions 11 11 2011 Updated hot keys portion Removed mention of touch screen and cascade function 2 16 2012 nea cannot co exist on your Sequoia in chapter 1 2 23 2012 Added audio impedance level info into specs portion 3 8 2012 Added Touch to Mouse Utility portion to chapter 1
11. 4H s and control up to 20 computers with just one keyboard and mouse E 1 Non standard keyboards e g keyboards with a USB hub keyboards that need driver installation and programmable keyboard etc are not supported 2 Compatibility between the computer and the Sequoia 4H may depend on the computer s BIOS Setup If an incompatibility occurs you may refer to the computer s BIOS Setup and make sure USB port and PS 2 port are enabled if these items exist in the computer s BIOS Setup typically found in the Advanced or Onboard Device Configuration menu 3 Hook utility currently supports the Sequoia solo series non cascaded and the Pacific X HDU an HDMI transmitter Pacific X HDUT TX and an HDMI receiver Pacific X HDUR RX allows transmission of 1080060 HD over 100 meters based on HDBaseT technology refer to Pacific X HDU user manual for more details Connect a laptop or desktop computer to the Sequoia solo series or Pacific X HDU and simulate keyboard mouse function for remote control processing KVM feature 4 Refer to Avitech Hook utility user manual for more details 1 3 Specifications AVITECH is HDMI or DVI via DVI to HDMI adapter Automatic sensing HDMI mode v 480i 480p 576i 576p 720p 1080i 1080p DVI D mode v Upto 1920x1200 Transmission of audio signal is not included when using the DVI to HDMI adapter tt HDMI or DVI via DVI to HDMI adapter Peripheral Sharing Compu
12. DVI Output HDMI or DVI Output USB Cascade USB Cascade gt eqQt oia Sequoia R a A jel J a Seq oia Je EROU CEAL Del Seuudla 4H 1 Rear Panel A Sequoia 4H 2 Sequoia 4H 3 Sequoia 4H 1 Audio Output Stereo d p Mic Remote Control P7 HDMI or DVI Signal in P KVM Connection P Audio Output N Audio Output N HDMI or DVI s gnal in Keyboard Mouse Stereo d b Stereo d b KVM Connection Mic Mic B aA Computer 1 Computer 2 Computer 3 Computer 4 KVM Connection HDMI or DVI Signal in KVM Connection HDMI or DVI Signal in Figure 2 3 Cascading Three Sequoia 4H s Setup Step 1 Perform steps 1 3 for the first Sequoia as outlined in the previous section 2 1 1 Basic Setup When Connecting to a Regular or Touch screen Display Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 AVITECH Repeat the aforementioned steps for the second and third Sequoia 4H to be cascaded Connect a mouse and keyboard to the USB ports located on the Sequoia s front panel First Sequoia only Connect first Sequoia s USB type B port P to second Sequoia s USB type A port UEF using a standard USB A B cable Repeat this procedure to connect second Sequoia to the third Move the mouse or press Pause Break key and the Host mouse cursor will appear on display will disappear again after 5 seconds of inactivity Move the mouse again to display the Host
13. E E E E E EERO vii Limitation of Liability 0 0 0 0 cecceceecceeeeeeeeeeseeeeeeeesseaeeeeeesseeseeeeesaaeeeeeesseaseeeeessaaeeeees vii Extended Warranty Opin ccacsscocc des gecendecedesnesanccsacacrtnedsaseateacarsansacaonateacseedesduadeaceansenbencsouwes vil Services and Repairs Outside the Warranty Period cccccseeeeeeeeeeeeeeeeeeeeeeeeeeeeees vii Regulatory Information cccccccssecceceeeeeeeeeeeeeeseeeeecseeeeeeseeeeeessaseeeeseaeeeesseseeesseneeesaaeeees vil Federal Communications Commission FCC Statement ccccceccceeseeeeeeeeeeeeeees vii European Union CE Marking and Compliance Notices cccccccceeesseeeeeeeeeaeeeeeees vii Australia and New Zealand C Tick Marking and Compliance Notice 08 vii TOENI SANE aoe E sees dequedenacssnseediqustsnacsstiens 1 1 1 Package Contents 0ccccccccccccccccccccaeeeeeeceeeeeesaeeeseeeeeeeeesaeeeeseeeeeeessaesseeeeeeeessaaageeeeeeees 1 1 2 Product Features aiid cece sects erccesiseessscinpnn cciecictide sti eciydacace side sdeenbecadouicsde cain eeneadneeninaeobaecideaie 3 1 3 Specifications acco ts ss snetccttece2sdnazsndccttegoastbeinetechtecctedseasedactpeacustsentarccblaotedsentedachauodedaecde 4 1 4 Connections to the Sequoia 4H ooo ccccceeeceeeeeesaeeeeseeeeeeeesseeeeeeeeeeeeessseaeeeeeeees 5 2 System Configuration cccceceeeeeeeeeeneeeeeeeeneeeeneeeaeeeesecaseseaseceasecasssease
14. cursor Place the cursor on the display of the first Sequoia 4H with the mouse and keyboard connected to it then perform a system configuration reset by pressing Ctrl Shift Alt R The reset takes approximately four seconds for each module During this process each Sequoia s Mode LED turns off one at a time Move the Host mouse cursor across all three displays in order for the system to complete the USB device initialization E If the cursor is unable to move over all three displays perform steps 5 and 6 again Step 8 The pop up menu X appears when the Host cursor is moved over the top right portion of a window v Click the l symbol or double click the left mouse button on the desired window to enter Remote operation mode v Remote operation mode connects you directly to the selected computer v The Sequoia s Host keyboard amp mouse will now control the selected computer v Item is not applicable for Sequoia 4H with touch screen display cascaded setup or with PS 2 connection Surfer feature default setting is on is enabled moving the mouse to a border shared with another remote computer will cause the Sequoia s Host keyboard and mouse to control the other computer Pressing Alt Ctrl Shift F10 will toggle this feature off and on AVITECH 3 Basic Operations There are two types of operating modes while using the Sequoia 4H the Host mode and the Remot
15. layout through an OSD on screen display While in Host operation mode it easily converts video images to full screen adjusts windows to any size and moves windows to any position Also for a more hands on user experience the Sequoia 4H can be used with a touch screen display The touch screen controls are receptive and intuitive it switches sources resizes windows moves windows to any position and controls a remote computer with a tap of your finger This chapter introduces the features and specifications as well as the external components of the Sequoia 4H 1 1 Package Contents After unpacking the shipping carton the following standard items can be found Utility Disc software and user manual 12 V DC 5A Power Adapter Standard Power Cord USA customer only Monitoring made easy AVITECH HDMI Cable optional Sequoia 5 in 1 Cable optional DVI to HDMI Adapter optional Table 1 1 Package Contents The following items are included if the optional rack mount kit was also ordered Pa Front Bracket Power Adapter Tray AVITECH o lt Multi angle hex driver 2 mm FH MSH AB 3x6 Screws 12 pieces Table 1 2 Optional Rack Mount Package Contents 1 2 Product Features The Sequoia 4H is HDCP compatible and capable of HDMI and DVI output DVI via an adapter It features automatic detection and a selection of optimum display resolution automatic input signal detection a more flexible wi
16. within Sequoia 1 within Sequoia 2 within Sequoia 3 4 computer windows only 4 computer windows only 4 computer windows only Legend Host operation mode action moving between Sequoia 4H dotted line and arrow no fill Remote operation mode action within a particular Sequoia 4H shaded area and arrow with fill Figure A 6 Surfer Feature on Cascaded System A Up to 5 Sequoia 4H can be cascaded 21 Monitoring made easy AVITECH Appendix B Using the Touch screen A Touch screen function is not available for Sequoia 4H with Surfer feature B 1 Lock Unlock Window Layout B When using a touch screen monitor with the Sequoia 4H for the first time or after a factory reset make sure to perform a screen calibration For details refer to Chapter 2 1 1 Basic Setup When Connecting to a Touch screen Display Use the finger or stylus to tap the top left corner of the monitor until a capital letter L is displayed then tap the L symbol twice and the current layout will be locked Repeat these steps to unlock the layout Tap the L symbol twice to lock window layout Figure B 1 Touch screen Lock Unlock Window Layout 22 Monitoring made easy AVITECH B 2 Pop up Selection Use a stylus or finger to tap the top right corner of a window and the following icons will appear S Pi S3 To execute an icon s function press on it for approximately 1 second To perform the swap
17. 0 Appendix B Using the TOUCH SCIeeN cccceceseeseeeneeeeneeenseeeneseeseeenseoeneseneeneaeeonsesons 22 B 1 Lock Unlock Window Layout 0ccccccccccccseeeeeeeeeaeeeeeeeesaeeeeeeeeaaaeseeeessaaeeeeessaaeeees 22 B 2 Pop up Selection ccecsistcsasenccnsckdds ssassendasestensdaseianeshns iddesistccudettasoeedesstanssbsaiddsscehsaadasteasteents 23 Bo PRU TIV ssa ccna E ns ei ence nes aetna ne E sade geeineeeaneate ase 23 B 4 Move Resize Window cccccccccccsseeeeeseeeeeeceeseeeeseeeeeseeaueeesseeeeeeseseeessseesseeeeesssaeeees 24 ili AVITECH B 5 Exit from Remote Operation Mode to Host Operation Mode ccceeeeees 24 B 6 Switch Control Cycle Between WiINdOWG cccccccccccseeeeeceeeeeeeseeseeesaeeeeesaaaeess 26 Appendix C Using the Touch to Mouse Utility for Windows XP onlly 00 28 Appendix D Resetting to the Factory Default State ccceeeeeeeeeeneeeneeeeneeeeeeeees 29 AVITECH USER MANUAL APPLICATION This manual contains information that is compatible to the following Sequoia 4H model Cascade and Touch Screen version Cascade and Surfer feature version Hardware Main Board R5 R5 Upper Board R6 R6 Firmware USB Host V0 00 39S1 1 26 2013 V0 00 33 05 27 2013 V0 01 09m 4h bldr1 40 USB Device V0 01 12s 4h bldr1 40 06 29 2012 11 13 2013 V0 01 09t 4h bldr1 40 06 29 2012 apply for regular shipment only V1 00 17 12 24
18. actured by other suppliers and supplied by Avitech carries the respective manufacturer s warranty Avitech assumes no warranty responsibility either expressed or implied for equipment manufactured by others and supplied by Avitech This Warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty of merchantability or fitness for a particular purpose all of which are expressly disclaimed This Hardware Warranty shall not apply to any defect failure or damage a caused by improper use of the Product or inadequate maintenance and care of the Product b resulting from attempts by other than Avitech representatives to install repair or service the Product c caused by installation of the Product in a hostile operating environment or connection of the Product to incompatible equipment or d caused by the modification of the Product or integration with other products when the effect of such modification or integration increases the time or difficulties of servicing the Product Any Product which fails under conditions other than those specifically covered by the Hardware Warranty will be repaired at the price of parts and labor in effect at the time of repair Such repairs are warranted for a period of 90 days from date of reshipment to customer Extended Warranty Options Avitech offers OPTIONAL Extended Warranty plans that provide continuous coverage for the Product after the exp
19. ation Mode 24 Monitoring made easy AVITECH To exit from Full Screen Remote operation mode press the upper or lower inch of the touch screen for approximately 1 5 seconds Note Figure B 5 indicates these areas with the black rectangles ST f AI z r MATE T E Surveillance Tap and continue pressing on the upper or lower areas indicated by the black rectangles Figure B 5 Touch screen Exit Remote Operation Mode When in Full Screen 25 AVITECH B 6 Switch Control Cycle Between Windows To switch control from window 1 window 2 press anywhere on window 2 for approximately 0 5 seconds When the Swap with Active Window parameter is set to ON switching control from window 1 gt window 2 will also swap the locations of the windows The Swap with Active Window parameter can only be adjusted using the Phoenix G Galaxy control software Sequoia Properties a Active Window Border Linel Line2 Line3 C Line4 Line5 Line6 I Alllines _ Select color color Button Configuration Switch primary and secondary buttons F Window priority manual designate Hide Enter icon and disable mouse double click function When switching computer window to full screen l Transfer control to this remote computer When returning from full screen to host mode C Remain full screen upon pressing Pause Break key Return to previous layout upon pressing Pause Break key When entering a remote compu
20. axy user manual Table 3 1 Host Operation Mode Functions 12 AVITECH 3 1 3 Hot keys Hot keys are available when utilizing the Sequoia 4H under the Host operation mode Detailed below are the Host operation mode hot keys Use Alt F1 F12 function keys up to F23 with special keyboard to load 2 zA user created preset files Sequoia can store up to 23 user created presets Alt F Toggle a particular window s full screen mode on off Note The window selected is where the Host cursor is currently residing Alt L Toggle lock unlock window layout Ctrl Esc This allows Ethernet communication so that you can use the Phoenix G Galaxy control software and send ASCII Z commands This loads the window to full screen mode while making the other Ctrl F window s fade from view Where F is the source window number e g F1 F4 Ctrl F1 will call up the source 1 window In a cascaded system First move the Host cursor to the desired module then select the source Ctrl L Toggle lock unlock keyboard and mouse When locked the keyboard and mouse are inoperable Ctrl O Toggle the audio output on off mute Ctrl P Toggle a window on and off where P is the source window number ee e g Ctrl 1 will turn on off the source 1 window Ctrl R Toggles between aspect ratios for the window that the Host cursor is on Available settings 4 3 16 9 and off Saves latest preset to the Sequoia so that on the next boot up the latest
21. dows Just moving the mouse to the window of another computer will allow the Sequoia s Host keyboard and mouse to control that computer E By default the Surfer feature is enabled upon starting up the Sequoia 4H The Ctrl Shift Alt F10 hot keys allow you to toggle Surfer feature on and off Surfer feature will be disabled after pressing Ctrl Esc hot key and then running and quitting Phoenix G software Surfer feature will automatically be enabled upon entering Host Operation Mode and then entering Remote operation mode 16 Monitoring made easy AVITECH A 1 Surfer Feature on Uniform Quad Layout That Fills Entire Screen Below figure shows the Source window control switching action upon moving the mouse to the window side Moving the mouse from one Source window to another transfers control from the former window to the target window Avitech Rack Mount Asser id oom 20 Pwe Ques Tha SOURCE 1 j SOURCE 2 Figure A 1 Surfer Feature 17 Monitoring made easy AVITECH Below figure shows the allowed Source window control switching action upon moving the mouse to the window sides shaded area indicators Moving the mouse from one Source window to another transfers control from the former window to the target window No Source window control switching action will occur upon moving the mouse to the outer
22. duct names are patented or registered trademarks of their respective companies COPYRIGHT The information in this manual is subject to change without prior notice No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical for any purpose without the express written permission of Avitech International Corporation Avitech International Corporation may have patents patent applications trademarks copyrights or other intellectual property rights covering the subject matter in this document Except as expressly written by Avitech International Corporation the furnishing of this document does not provide any license to patents trademarks copyrights or other intellectual property of Avitech International Corporation or any of its affiliates TECHNICAL SUPPORT For any questions regarding the information provided in this guide call our technical support help line at 425 885 3863 or our toll free help line at 1 877 AVI TECH or email us at support avitechvideo com AVITECH Contents About This IIA asst sich sepsece Sees hoes teecirensic sa eenseceb eccustseoaeiae lt esessaeae atpeca lt tanaactePoipanecteneeaedaeess li User Manual Application ccccccccccceccseeeeeeeeceeeeeeeeseeeeeeeeessaaeeceeesseeeceeessaeeeeeesssaaeeeeeeeas V User Manual History 0cccccccccccccseeeeeeeeceeeeeeeeecaeeeeeeeseeeeeeeessaaeeceeessaeaeeesessaaeeeeessaageeeeeenas V W AIL Y ee E A E A
23. e mode This chapter discusses both operational modes v Host Operation Mode When the Sequoia 4H is in Host operation mode the Host cursor is controlled by the mouse connected to the Sequoia 4H Or in the case of a cascaded setup the cursor is controlled by the mouse that is connected to the Master Sequoia The Host cursor controls the positions and sizes of the windows for up to four remote computers up to 20 when cascaded E Upon re connecting a keyboard or mouse the cursor may disappear Press the Pause Break key to solve this problem v Remote Operation Mode When the Sequoia 4H is in Remote operation mode the mouse cursor and keyboard are used to control a computer connected to the Sequoia 4H Understanding the Terminology USB host refers to the mouse keyboard USB ports located on the front panel of the Sequoia 4H PSE USB device refers to the DB15 connector source 1 4 ports located on the Sequoia 4H rear panel that connects to the computer s USB port through the 5 in 1 cable Tips on Navigating the Sequoia 4H Up to four computers are able to connect with a single Sequoia 4H The Sequoia puts each remote computer in a window and displays all four windows on one monitor This is how four computers can be displayed and controlled from a single monitor When Host operation mode is active use the mouse connected to the Sequoia to re size and re position any window on the output display
24. e your previously saved preset files will be automatically removed Use Phoenix G software to set the output resolution and create preset file s again 29
25. eaker Set Indicators Audio In Out USB Type A keyboard mouse USB Type B USB Type A peripheral sharing Rear Panel HDMI Output 5 in 1 Input HDMI Input O Power DC 12V Embedded speakers for monitoring audio Volume can be adjusted and output can be enabled disabled PWR v Glows green when the Sequoia 4H is turned ON MODE v Glows green when the Sequoia 4H is in Host operation mode v Glows amber when the Sequoia 4H is in Remote operation mode 1to4 v Glows green when a computer is operating under Remote operation mode full control through keyboard and mouse Glows amber when a particular computer is operating under Host operation mode monitoring only v Blinks amber when a rebooting or powered off computer is connected to the Sequoia 4H KeA C v Connects to the green connector for headphone function stereo se U v Connects to the red connector for microphone function Connects to a USB mouse and keyboard Use these ports for control in Host operation mode Connects to remote computer for control via a USB mouse and keyboard These two ports can connect to a USB 2 0 hub USB flash disk etc Connects a monitor display via HDMI or DVI signal cable a DVI to HDMI converter may be required Connects the remote computer s USB PS 2 and audio connectors via the proprietary Sequoia 5 in 1 cable Connects HDMI DVI inputs via HDMI or DVI signal cable a DVI to HDMI conv
26. eenesonesensesoaes 7 2 1 Getting the Sequoia 4H Ready cccccccccccccccceseeseeeeeeeeessaeeeeeeeeeeeessaaeaseeeeeesessaaeaeses 7 2 1 1 Basic Setup When Connecting to a Regular or Touch screen Display 7 2 1 2 Basic Setup When Cascading Sequoia Devices nssesesossssrrrrnrrrrrrrrrrees 9 3 Basic Operations snnssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn nnna 11 3 1 Host Operation Mode iciicisicieccttecsnninensdaneducaccnwebnnaceadhesdencnenbeezedebeaeaxeeaeasecdbadecsnnestdensdicdias 12 3 1 1 Pop up Selections 000000nnnnn0000annnnnnnonennnnennnnnsrnnnrnrnnnsnnnnrrrrresrnnrrrreensennnreneen 12 Bets FUTONS e e E E E 12 co a FS Hotkeys ee ne eee ne hiiaran ikada iaia 13 3 2 Remote Operation Mode cccccccccccccsssseeecceeeeeceaeeeeceeeeeesaaaeeeeeeeeessaaaaeeeeeeeeessaaegeees 14 32 1 POMC YS rnn R a a Reo 14 Appendix A Using the Surfer Feature cccccscseseeceseeceeeeneeceseeensecenesonseseaeeeeneseas 16 A 1 Surfer Feature on Uniform Quad Layout That Fills Entire Screen 00000 0 17 A 2 Surfer Feature on Non uniform Quad Layout ccccecceceeeeeeeeeeeeeeeeeeeeeeeeaaees 19 A 3 Surfer Feature on Full Screen Source WindOW cccccccccecseeeecseeeeeaeeeesaeees 20 A 4 Surfer Feature on Cascaded System ccccccccccsecccceeeeeceeeeeceeeesseeeeeseeeseneeesaeees 2
27. ek TO TIPOI6V AUTO TIANPOI TIC TIPOBAEWEIC Ts EUupwtraikns Odnyiac 1999 5 EC slenska Icelandic essi vara stenst regluger Evr pska Efnahags Bandalagsins numer 1999 5 EC Italiano Italian Questo prodotto conforme alla Direttiva Europea 1999 5 EC Norsk Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999 5 EC Portugu s Portuguese Este produto cumpre com as normas da Diretiva Europ ia 1999 5 EC Espa ol Spanish Este producto cumple con las normas del Directivo Europeo 1999 5 EC Svenska Swedish Denna produkt har tillverkats i enlighet med EG direktiv 1999 5 EC Australia and New Zealand C Tick Marking and Compliance Notice Statement of Compliance This product complies with Australia and New Zealand s standards for radio interference AVITECH 1 Getting Started Avitech Sequoia 4H is a highly innovative device Sequoia integrates functions of a KVM keyboard video mouse switch and a robust multi viewer into a single enclosure Sequoia 4H provides a simple solution for any user who works in an environment with multiple computers The Sequoia 4H is able to seamlessly switch and control up to 4 computers with just a keyboard and mouse Additionally its scalability through cascading allows Sequoia to be ideal for both individual users and corporate applications The Sequoia features a visual user interface Host operation mode which allows users to configure the
28. erter may be required Connects to the 12V DC 5A power adapter Monitoring made easy Rear Panel Ethernet IP Dip Switches Power Switch AVITECH For setup using the Phoenix G software Galaxy and control using ASCII Z commands via a network connection Protocol TCP IP UDP Resets the Sequoia to factory default settings or updates firmware Turns the Sequoia 4H power ON and OFF Table 1 4 Sequoia 4H Component Description Monitoring made easy AVITECH 2 System Configuration This chapter discusses the process of setting up Sequoia 4H 2 1 Getting the Sequoia 4H Ready The Sequoia 4H can be connected to most monitors and some touch screen displays It can also be cascaded with up to five 5 Sequoias for larger applications To control the Sequoia 4H directly connect a keyboard and mouse to the USB port on its front panel Alternatively to control the Sequoia remotely use a laptop or desktop computer and connect it to the Sequoia s USB type B port on its front panel use a USB A B cable Then run Avitech s Hook software utility on the controlling computer to simulate mouse and keyboard operation E 1 Hook utility currently supports the Sequoia solo series non cascaded and the Pacific X HDU an HDMI transmitter Pacific X HDUT TX and an HDMI receiver Pacific X HDUR RX allows transmission of 1080p60 HD over 100 meters based on HDBaseT technology refer to Pacific X HDU user manual for mo
29. gt computer 1 If one of the sources does not have a controllable input such as a DVD player that source would be skipped for example if source 2 has no input and source 4 is connected to a DVD player then hot key switching would be from computer 1 gt computer 3 gt computer 1 Note Not applicable after pressing the above mentioned Ctrl Esc hot key Hot key function will automatically be enabled upon entering Host Operation Mode and then entering Remote operation mode Switch control backward from window 1 gt window 4 gt window 3 gt window 2 gt window 1 If only one computer is connected then no switching would occur Make sure to press Shift key first because Pause Break key would exit from Remote operation mode to Host operation mode Note Not applicable after pressing the above mentioned Ctrl Esc hot key Hot key function will automatically be enabled upon entering Host Operation Mode and then entering Remote operation mode Table 3 3 Hot keys of Remote Operation Mode When using Apple s MacBook computer use control option Alt shift kK to perform Host Remote operation mode switch because there is no Pause Break key 15 AVITECH Appendix A Using the Surfer Feature E Surfer feature is not available for Sequoia 4H with touch screen display setup or with PS 2 connection The Surfer feature is designed to make it easy to control multiple remote computer win
30. h to Mouse icon 4 appearing on Windows taskbar and select Settings Step 4 Set the Double click Speed with the slider or enter the time in ms Note two successive taps on the touch screen mimics double clicking the left mouse button Sequoia Jouch to Mouse Properties Double click Speed 500 oe Right Key Trigger aaa Fast 2000 ms Version 1 02 Show Info i Figure C 1 Touch to Mouse Utility Setup Step 5 Set the Right Key Trigger with the slider or enter the time in ms To mimic the action of the right mouse button hold your finger on the touch screen until the specified time has elapsed Step 6 Then click Hide when finished To automatically start Touch to Mouse upon the next Windows XP boot up right click the Touch to Mouse icon and select Auto start when Windows starts up A checkmark will appear signifying it is enabled E 28 AVITECH Appendix D Resetting to the Factory Default State To reset your Sequoia to its factory default state perform the following steps Step 1 Power off the Sequoia by pressing the power switch Step 2 Push number 2 middle dip switch located on Sequoia s rear panel downwards to the ON position Figure D 1 Push down the Number 2 Middle Dip Switch Step 3 Power on the Sequoia by pressing the power switch Step 4 Push back the number 2 middle dip switch upwards to the default position B Upon resetting your device to factory default stat
31. iration of the Warranty Period Contact an Avitech sales representative for details on the options that are available for the Avitech equipment Services and Repairs Outside the Warranty Period Avitech makes its best offer to repair a product that is outside the warranty period provided the product has not reached its end of life EOL The minimum charge for such repair excluding shipping and handling is 200 US dollars AVITECH INTERNATIONAL CORPORATION e 15377 NE 90th Street Redmond WA 98052 USA e TOLL FREE 1 877 AVITECH e PHONE 1 425 885 3863 e FAX 1 425 885 4726 e info avitechvideo com e http avitechvideo com vii Monitoring made easy AVITECH Regulatory Information Marking labels located on the exterior of the device indicate the regulations that the model complies with Please check the marking labels on the device and refer to the corresponding statements in this chapter Some notices apply to specific models only Federal Communications Commission FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference
32. ndow configuration any size any position Picture in Picture PiP overlay display video loss detection image gain that can be adjusted manually or automatically and crop pan image The Sequoia can control up to four computers and can automatically detect PS 2 amp USB interfaces It is also Hot pluggable which allows the addition removal of computers without powering down any devices The Sequoia s front panel features LED indicators for monitoring the following Connected Computers Active or Standby Operation Mode Host or Remote and Power For audio monitoring the Sequoia 4H features two built in soeakers and a 1 8 inch headphone jack The Sequoia 4H accepts embedded HDMI audio 2ch stereo and analog audio stereo To assist with audio video re syncing the Sequoia 4H features up to 170ms of audio delay The Sequoia 4H is able to fully utilize the flexibility of Avitech s Phoenix G software formerly called Galaxy With the Phoenix G control software you can easily configure display options crop pan images save up to 23 presets and even program a list of display layouts for the Sequoia to automatically cycle through the Briefing feature refer to Sequoia 4H Phoenix G manual for more details Moreover with Avitech s Hook utility patent pending a laptop can be used to control the Sequoia 4H via the USB port located on the front panel P For larger applications it s possible to cascade up to five Sequoia
33. ol software to create and save your own presets Load the next user created preset file Table 3 2 Hot keys of Host Operation Mode Pressing Ctrl Esc hot keys as well as the Load Preset action will clear the undo Ctrl Z and redo Ctrl Y list in memory 3 2 Remote Operation Mode 3 2 1 Hot keys Hot keys are available when utilizing the Sequoia 4H under the Remote operation mode Detailed below are the Remote operation mode hot keys MSC Pause Break Ctrl Esc Exits from the Remote operation mode to the Host operation mode Or double click the middle mouse wheel button in Sequoia 4H model with Surfer feature only This command allows Ethernet communication so that you can use the Phoenix G Galaxy control software or send ASCII Z commands Note 1 Pressing Ctrl Esc will also open up the Windows start menu This is Okay simply exit the Windows start menu and proceed 2 To also disable the Surfer feature next hot key description press Ctrl Esc and run and quit the Phoenix G software Surfer feature will automatically be reenabled upon entering Host operation mode and then entering Remote operation mode 14 Monitoring made easy AVITECH Se Ctrl Shift Alt F10 Ctrl Shift Alt V Ctrl Pause Break Shift Pause Break Toggles the Surfer feature on and off moving mouse to a border shared with another computer will cause the Se
34. quoia s Host keyboard and mouse to control the other computer Note 1 Not applicable with Sequoia 4H with touch screen display setup or with PS 2 connection 2 Not applicable after pressing the above mentioned Ctrl Esc hot key and then running and quitting Phoenix G software Surfer feature is automatically enabled upon entering Host Operation Mode and then entering the Remote operation mode 3 Refer to Appendix A for more details This command is used to read the Sequoia s USB device firmware version DB15 connector source 1 4 ports which is located on the Sequoia 4H rear panel that connects to the computer s USB port through the 5 in 1 cable Open Microsoft Notepad and then press Ctrl Shift Alt V to paste the firmware text onto Notepad Note This function is only available when the computer and Sequoia are connected via the 5 in 1 cable s USB port Switches control from window 1 up to window 4 then back to window 1 If only one computer is connected then no cycling will occur Make sure to press the Ctrl key first because pressing the Pause Break key first will just remove you from Remote operation mode Note This function is only available when the computer and Sequoia are connected via the 5 in 1 cable s USB port Example If Sequoia 4H is connected to 4 computers via the 5 in 1 cable then hot key switching would be from computer 1 computer 2 gt computer 3 gt computer 4
35. re details Connect a laptop or desktop computer to the Sequoia solo series or Pacific X HDU and simulate keyboard mouse function for remote control processing KVM feature 2 Refer to Avitech Hook utility user manual for more details 2 1 1 Basic Setup When Connecting to a Regular or Touch screen Display The following figure shows a typical setup with an Avitech Sequoia 4H connected to four computers DO NOT place any object on the top or side panels of the Sequoia 4H Doing so could affect its internal components and or its heat dissipation HDMI or DVI Output s he ie S oo 2 k ob Sequoia s Pr Tt A T Computer for setup with Phoenix G y t A A G Webcam Audio Output Stereo USB Flash Disk gt ae b Digital Camera Printer Keyboard Mouse HDMI or DVI Signal in HDMI or DVI Signal in Q 2 g S KVM Connection Remote Control via Avitech Hook KVM Connection KVM Connection Laptop or h is j Desktop Computer Allin one Printer Scanner Computer 1 Computer 2 Computer 3 Computer 4 Figure 2 1 Sequoia 4H with Regular Display Setup Monitoring made easy AVITECH USB Hub E Z Comput Keyboard Mouse omputer for setup with Phoenix G Webcam USB Flash Disk l Digital Camera Printer HDMI or DVI Signal in
36. t pluggable The Sequoia 4H allows the swapping of window positions window size adjustments and audio output selections The following are summarized functions of the Host operation mode Window resizing Window repositioning Window position swapping Full screen window Access a remote computer Lock unlock window layout Enable disable audio output Function O O Drag the border of a window to a desired size Drag a window to a new position Move the Host cursor to the top right corner of a window click the S icon and then move the cursor now a capital letter S to the destination window and click the left mouse button Move the Host cursor to the top right corner of a window and click on the 5 icon to maximize to full screen Select to return back from full screen Method 1 Move the Host cursor to the top right corner of a remote computer window click J to access the Remote operation mode Method 2 Move the Host cursor so that it is on the desired remote computers window and double click Move the Host cursor to the top left corner of the display until the cursor becomes a Capital letter L then click to lock the window layout Repeat these steps to unlock the layout Double click the audio tally B green and it will turn to J red to signify that an audio output is coming from a window Note To enable an audio output from a source that is not the active window refer to the Phoenix G Gal
37. ter Connection Port Switching Operating System Power Dimension Weight Environment Safety Automatic sensing or user selectable Up to 1920x1200 WUXGA at 50HZ 60Hz or 1600x1200 UXGA 75Hz Transmission of audio signal is not included when using the DVI to HDMI adapter USB type A port for USB 2 0 hub x 2 Up to 4 units maximum Method Keyboard hot keys both in Host and Remote operation modes Mouse OSD pop up menu in Host operation mode Surfer feature in Remote operation mode Microsoft Windows 98 Special Edition 2000 Professional XP Vista Server 2003 Server 2008 Windows 7 Windows 8 Mac O S X 10 5 or later version only Linux OS Fedora 10 Ubuntu 8 1 Scientific 5 2 RedHat Mint 6 0 Debian 5 0 PC Linux OS 2009 SUSE 11 1 Mandriva 2009 CentOS 5 2 Note Windows NT is not supported Power consumption is 25W Power Supply adapter Input AC 100 to 240V 50H2Z 60Hz Output DC 12V DC 5A Dimension 261x174x44 mm 10 3x6 9x1 7 inch Weight 1 3 kg 2 8 Ib Temperature Operating 0 C 32 F to 40 C 104 F Storage 10 C 14 F to 50 C 122 F Humidity 0 to 80 relative non condensing Safety FCC CE C Tick Class B Table 1 3 Specifications 0 Te er TET PR eae Je ol a QOO OO O OO OO ODEO AVITECH 1 4 Connections to the Sequoia 4H U T j J O Figure 1 1 Sequoia 4H Components FrontPanel Panel Stereo Sp
38. ter window M Swap with active window Wheriwitching source window to full screen Disable label tally display With audio output Pop up Selections Background Color Select color i Audio Status oo a T V Audio indicators V Audio output from active window Figure B 6 Phoenix G Utility Swap with Active Window 26 Monitoring made easy AVITECH To switch Sources cycle while in Full Screen Remote operation mode press within an inch of the left or right edges of the touch screen and hold for approximately 1 5 seconds Refer to Figure B 7 e Cycle Forward press right side of screen window 1 gt window 2 gt window 3 gt window 4 gt window 1 e Cycle Backward press left side of screen window 1 gt window 4 gt window 3 gt window 2 gt window 1 A Fi INA h as Surveillance Tap and continue pressing on the left or right areas indicated by the black rectangles Figure B 7 Touch screen Switch Sources while in Full Screen Mode 2 Monitoring made easy AVITECH Appendix C Using the Touch to Mouse Utility for Windows XP only The Touch to Mouse utility is designed for use with a touch screen monitor and a remote computer running Windows XP To start the Touch to Mouse utility perform the following steps Step 1 Copy the file Sequoia USB Touch Tool exe to the designated computer Step 2 Double click the file Sequoia USB Touch Tool exe Step 3 Right click the Touc
39. ting 3 or more devices at the same time such as a touch screen a mouse and a keyboard you can connect a USB hub to increase the number of USB connections Refer to Figure 2 2 Non standard keyboards e g keyboards with a USB hub keyboards that need driver installation and programmable keyboard etc are not supported Step 5 Connect the provided 12V DC power adapter to the Sequoia 4H and turn the Sequoia on E 1 For computers using the PS 2 connection instead of a USB connection re boot at this time 2 Iltis not necessary to re boot computers connected via USB connection plug and play feature Step 6 Move the mouse or press the Pause Break key to display the Sequoia s Host cursor will disappear again after 5 seconds of inactivity Move the mouse again to display the Host cursor Monitoring made easy AVITECH Step 7 Pg up menu 4 5 will appear upon moving Host cursor to the window s top right position Click the 44 symbol or double click the left mouse button on the desired window to enter Remote operation mode v Remote operation mode connects you directly to the selected computer v The Sequoia s Host keyboard and mouse will now control the selected computer v item not applicable for Sequoia 4H with touch screen display setup or PS 2 connection Surfer feature default setting is on is enabled moving the mouse to a border that is shared with another remote computer will ca
40. to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Avitech is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation European Union CE Marking and Compliance Notices Statements of Compliance English This product follows the provisions of the European Directive 1999 5 EC Dansk Danish Dette produkt er i overensstemmelse med det europ iske direktiv 1999 5 EC Nederlands Dutch Dit product is in navolging van de bepalingen van Europees Directief 1999 5 EC Suomi Finnish T m tuote noudattaa EU direktiivin 1999 5 EC m r yksi Fran ais French Ce produit est conforme aux exigences de la Directive Europ enne 1999 5 EC Deutsch German Dieses Produkt entspricht den Bestimmungen der Europ ischen Richtlinie 1999 5 EC EAAnvikd Gre
41. ts manufactured in its facility the Product that these products will be free from defects in material and workmanship for a period of 1 year or 15 months from the date of shipment of the Product to the purchaser There is a 3 month grace period between shipping and installation If the Product proves to be defective during the 1 year warranty period the purchaser s exclusive remedy and Avitech s sole obligation under this warranty is expressly limited at Avitech s sole option to a repairing the defective Product without charge for parts and labor or b providing a replacement in exchange for the defective Product or c if after a reasonable time is unable to correct the defect or provide a replacement Product in good working order then the purchaser shall be entitled to recover damages subject to the limitation of liability set forth below Limitation of Liability Avitech s liability under this warranty shall not exceed the purchase price paid for the defective product In no event shall Avitech be liable for any incidental special or consequential damages including without limitation loss of profits for any breach of this warranty If Avitech replaces the defective Product with a replacement Product as provided under the terms of this Warranty in no event will the term of the warranty on the replacement Product exceed the number of months remaining on the warranty covering the defective Product Equipment manuf
42. use the Sequoia s Host keyboard and mouse to control the other computer Pressing Alt Ctrl Shift F10 will toggle this feature off and on E When connecting to touch screen display Press Ctrl T on the keyboard to perform a screen calibration This is necessary when connecting to a touch screen for first time or upon resetting the Sequoia 4H v The following symbol will appear in the top left portion of the screen v Use a stylus or a finger to press on the center of the symbol until the next symbol appears takes approximately five seconds v Perform this step each time the E symbol appears top left top right lower left lower right v Upon completing screen calibration the Sequoia will return to Host mode and the four source windows will re appear on screen 2 1 2 Basic Setup When Cascading Sequoia Devices Cascading is the technique of combining multiple Sequoia devices up to five through USB A B cables Only the keyboard and mouse are cascaded Other functions e g audio video and USB hub are not and depend on the output from each individual computer and the associated Sequoia See Figure 2 3 The following figure shows three Sequoia 4H s cascaded together with each Sequoia 4H connected to four computers B Cascading is available on the Sequoia 4H 2H2U and 2x2V A combination of any of these Sequoia devices can be cascaded to meet custom applications HDMI or DVI Output HDMI or
43. window function press on the S icon for 1 second then tap twice on the destination window Tap and continue pressing either one of the S lt J H symbol to execute Figure B 2 Touch screen Pop up Selection B 3 Audio Tally To enable audio output on any window tap twice on the audio tally iJ green and it will turn to red E showing that audio output is coming from the window By default audio output corresponds to the active window To enable audio output from a source other than 21 a the active window use the Phoenix G Galaxy control software and disable the item Audio Output from Active Window remove checkmark under Settings gt System Parameter gt Sequoia Properties 23 Monitoring made easy AVITECH B 4 Move Resize Window To move a window tap anywhere near the center of the window and when the Hp symbol appears drag the window to a new position To resize a window tap anywhere near the edge of the window and when the directional arrows appear drag the windows border to the desired size Tap and drag to resize move window Figure B 3 Touch screen Move Resize Window B 5 Exit from Remote Operation Mode to Host Operation Mode To exit from Remote operation mode to Host operation mode tap twice anywhere outside the active Remote window This includes tapping twice on any of the other windows Tap twice anywhere outside Source 1 window Figure B 4 Touch screen Exit Remote Oper
Download Pdf Manuals
Related Search