point 2 kurz-eng-030412-01.indd
Contents
1. CHANGING THE FILTER Pull out the filter on the back of the device and replace it with a new or cleaned one NOTICE Always use the device with the filter element inserted and clean the filter element regularly If the filter element is heavily soiled or not inserted this may damage the device and result in unpleas ant odors CLEANING Cleaning the filter 1 2 Pull out the filter on the back of the device Clean the filter with mild soapy water do not use any other agents rinse the filter thoroughly with clear water and let the filter dry completely Cleaning the mask daily 1 Disconnect the mask with the exhalation valve from the therapy tube Use mild soapy water for cleaning do not use any other agents rinse thoroughly with clear water and let the mask dry completely protected from direct sunlight Removing the filter Cleaning the therapy tube weekly 1 Disconnect the therapy tube from the device and the mask 2 Use mild soapy water for cleaning rinse the tube thoroughly with clear water and let the vertically suspended therapy tube dry completely Cleaning the device weekly 1 Unplug the mains plug 2 Wipe the device with a cloth slightly moistened with soapy water and then rub dry Cleaning the headgear If necessary the headgear must be cleaned as follows 1 Remove the headgear from the mask 2 Clean the headgear in accordance with the information in the headgear manufac2. WAKE UP ALARM ON AND OFF e To activate the wake up alarm press D A bell symbol appears on the display e To deactivate the alarm press O The bell symbol disappears SETTING THE WAKE UP TIME Press the enter key for 1 second Use the selection keys and to select Wake Time Press the enter key Use the selection keys O and to set the time Confirm each setting by pressing the enter key ak WN gt ACCESSORIES OPTIONAL Therapy air humidifier aquapoint 2 Filter system filtersystempoint 2 Battery pack powerpackpoint 2 Please refer to the respective user s manual for further information
3. e device is turned on by the patient breathing In man ual mode press the ON OFF key to start the device The device first of all runs for the time selected by you for the mask test at the prescribed pressure You should now ensure the mask s correct positioning to avoid potential leakages Place the tube in such a way that it does not exert any strain on the mask when you lie down 10 Now breath deeply and calmly just through your nose G yy day 84 9 MENUS The point 2 has a standard and a complete menu To switch between the menus press the enter key Then hold the selection keys Q and down at the same time for a few moments The display shows one of the following messages Standard Menu ComPlete Menu active active SETTING PARAMETERS The following 3 keys are available to set the parameters on the device O Selection key Y Selection key Enter key 1 Press the enter key for approx 1 second 2 If necessary select the standard or the complete menu 3 Use the selection keys Q and O to switch to the next parameter A triangular symbol F in front of a display row means that this row has been selected 4 Press the enter key to change a selected parameter 5 Use the selection keys Q and O to set the desired value 6 Confirm your setting by pressing the enter key NOTICE Some parameters are PIN code secured and may only be changed by the physician SWITCHING THE
4. turer s users manual HOFFRICHTER GmbH Mettenheimer Stra e 12 14 19061 Schwerin Germany phone 49 385 39925 0 fax 49 385 39925 25 e mail info hoffrichter de 01 23 web www hoffrichter de point 2 kurz eng 03041 2 01 art no 50000519 NOOR OND ual Follow the user s manual HOFFRICHTER Quality makes the Difference m m m m Therapy tube connection Humidifier lock Selection keys Enter key Display ON OFF key Contact socket for humidifier optional equipment variant Control panel for humidifier optional equipment variant Rating plate Filter or connection port for the filtersystempoint 2 Air inlet for baro sensor RS282 interface DC power connection Brief instructions This document does not replace the manufacturer s user s man COMMISSIONING ule 9 Position the device according to the installation instruc tions see user s manual Connect the power supply to the device Connect the mains cable to the power supply and plug into a power socket The device starts up and displays a welcome text device type and software version as well as the current num ber of therapy hours and then switches to the date and time display standby Connect the therapy tube a to the air outlet and b to the mask Calibrate the device as described in the user s manual in the chapter Calibration Put the mask on If automatic mode has been selected th
Download Pdf Manuals
Related Search