Washrooms - Matrix Cleaning Systems
Contents
1. 000 Cleaning Systems Washrooms Steam Operating Procedures SOP5 SINK CLEANING STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the steam and vacuum hose ensuring you lock the clip in position Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING Steam Clean and scrub sinks taps pipe work and basins inside and out Ensure all surfaces are covered work systematically Remove the detail brush from short steam lance being careful as this will be hot Direct the short steam lance under tap fittings to blast out dirt Fit the 50mm Nylon Brush to short lance place brush over plug hole for 30 sec2. MATRIX TRAINING amp SUPPORT Matrix 000 Cleaning Systems Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix 000 Cleaning Systems
3. URINAL As above but include cleaning all pipe work with detail nylon brush STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE MATRIX TRAINING amp SUPPORT Matrix 000 Cleaning Systems Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix 000 Cleaning Systems SOP8 Washroom Steam Operating Procedures SOP8 WASHROOM WINDOWS STEP 1 PREPARE Ensure protective cloth
4. Fit the squeegee insert into the suction hand tool connect to the hose pistol grip Now using the steam and vacuum together clean over all tiled surface areas to generate a dry and sanitised surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE oete o MATRIX TRAINING amp SUPPORT M a 3 rix 000 Cleaning Syetens Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix
5. Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING Clean around the skirting boards and edges of the room using the steam Remove the short steam lance from the extension tube being careful as this will be hot Fit the floor brush squeegee insert into the floor brush nozzle connect the floor brush nozzle to the extension tube ensuring you lock the clip into position Using steam only clean no more than 2 square metres at a time starting from the furthest point of your exit point Now using the steam and vacuum together clean over this area to generate a dry and sanitised surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE MATRIX TRAINING amp SUPPORT Matrix 000 Cleaning Systems Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE i
6. This will be extremely hot Matrix 000 Cleaning Systems Washrooms Steam Operating Procedures SOP4 WALL TILE STEAM CLEANING STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the steam and vacuum hose ensuring you lock the clip in position use extension tubes if carrying out high level cleaning Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING Clean all tile grouting from top to bottom working detail brush along the grout line Work systematically in sections of 1 2 square meters ensure all grouting is covered Remove the short steam lance from the hose being careful as this will be hot
7. apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix eee Cleaning Systems Washrooms Steam Operating Procedures SOP3 WALL STEAM MOPPING STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the microfbre pad to the hand steam mop head fit universal adaptor to mop Connect the hand steam mop to the steam only hose use extension tubes if carrying out high level cleaning ensuring you lock the clip into position Fit the steam only hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to low volume steam setting Press the steam rocker switch on the top of the handle to dispense the steam STEP 4 CLEANING Using steam only work in
8. away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE eee e o MATRIX TRAINING amp SUPPORT M a rix eoo Cleaning Syetens Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix 000 Cleaning Systems Washrooms Steam Operating Procedures SOP10 TOILET DOOR HANDLE STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposabl
9. steam and vacuum together clean over all flat surface areas to generate a dry and sanitised surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE MATRIX TRAINING amp SUPPORT M a r i X 000 Cleaning Svetema Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix 000 Cleaning Systems SOP7 Washrooms Steam Operating Procedures SOP7 TOILET BOWLS AND URINALS
10. STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the steam and vacuum hose ensuring you lock the clip in position Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING TOILET BOWL Steam Clean and scrub surface of bowl seat hinges and seat Remove the short steam lance from the hose being careful as this will be hot Fit the floor brush squeegee insert into the floor brush nozzle connect the floor brush nozzle to the extension tube ensuring you lock the clip into position Now using the steam and vacuum together clean over this area to generate a dry and sanitised surface removing all residue from the surface
11. Washrooms Steam Operating Procedures FLOOR STEAM SCRUBBING FLOOR STEAM MOPPING WALL STEAM MOPPING WALL TILE STEAM CLEANING SINK CLEANING FIXTURES AND FITTINGS TOILET BOWLS AND URINALS WASHROOM WINDOWS TOILET DOOR 10 TOILET DOOR HANDLE ow On AW PWD MATRIX TRAINING amp SUPPORT See e Cleaning Systems Washrooms Steam Operating Procedures SOP1 FLOOR STEAM SCRUBBING STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the extension tube ensuring you lock the clip into position Connect the extension tubes to the hose handle again ensure all locking clips are connected and locked into position Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting
12. ands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the steam and vacuum hose ensuring you lock the clip in position use extension tubes if carrying out high level cleaning Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING Steam Clean and scrub all fixtures and fittings inside and out here possible Ensure all surfaces are covered work systematically Remove the detail brush from short steam lance being careful as this will be hot Direct the short steam lance into all crevices of fittings to blast out dirt Remove the short steam lance from the hose being careful as this will be hot Fit the squeegee insert into the suction hand tool connect to the hose pistol grip Now using the
13. d dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the microfibre pad to the hand steam mop head fit universal adaptor to mop Connect the hand steam mop to the steam only hose use extension tubes if carrying out high level cleaning ensuring you lock the clip into position Fit the steam only hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to low volume steam setting Press the steam rocker switch on the top of the handle to dispense the steam STEP 4 CLEANING Using steam only work in sections clean no more than 1 square metre at a time steam clean all vertical surfaces work from top to bottom Ensure passes overlap change microfibre pad when required Ensure all areas have been steam mopped to achieve a clean dry and sanitised surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy
14. e gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the steam and vacuum hose ensuring you lock the clip in position Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING Steam Clean and scrub door handle contact area Remove the short steam lance from the hose being careful as this will be hot Fit the floor brush squeegee insert into the floor brush nozzle connect the floor brush nozzle to the extension tube ensuring you lock the clip into position Now using the steam and vacuum together clean over this area to generate a dry and sanitised surface removing all residue from the surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE
15. e steam flap clips into place Turn the steam control knob if applicable to low volume steam setting Press the steam rocker switch on the top of the handle to dispense the steam STEP 4 CLEANING Using steam only work in sections clean no more than 2 square metres starting from the furthest point of your exit point Ensure passes overlap change microfibre pad when required Ensure all areas have been mopped to achieve a clean dry and sanitised surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE MATRIX TRAINING amp SUPPORT Matrix 000 Cleaning Systems Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical
16. ing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the detail nylon brush to the short steam lance Connect the short steam lance to the steam and vacuum hose ensuring you lock the clip in position use extension tubes if carrying out high level cleaning Fit the steam and vacuum hose into the front of the machine ensuring the steam flap clips into place Turn the steam control knob if applicable to your desired setting Press the red steam trigger under the handle to dispense the steam STEP 4 CLEANING Steam Clean window frame and handle with detail nylon brush cleaning from top to bottom pay special attention to the window seal Work systematically ensure all surfaces are covered Remove the short steam lance from the hose being careful as this will be hot Fit the squeegee insert into the suction hand tool connect to the hose pistol grip Now using the steam and vacuum together steam clean over all window surface areas to ge
17. nerate a dry and sanitised surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE MATRIX TRAINING amp SUPPORT M a J rix 000 Cleaning Syetens Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix eee Cleaning Systems Washrooms Steam Operating Procedures SOP9 TOILET DOOR STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean an
18. onds to steam sanitise STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE ee 9 ee MATRIX TRAINING amp SUPPORT M a t ye ii xX 000 Cleaning Avatar Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix 000 Cleaning Systems Washrooms Steam Operating Procedures SOP6 FIXTURES AND FITTINGS STEP 1 PREPARE Ensure protective clothing is worn as advised and your h
19. s worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet This will be extremely hot Matrix 000 Cleaning Systems Washrooms Steam Operating Procedures SOP2 FLOOR STEAM MOPPING STEP 1 PREPARE Ensure protective clothing is worn as advised and your hands are clean and dry Carry out safety checks on the equipment as instructed in the user manual Place all warning safety signs are correctly positioned around the area to be cleaned Wearing the disposable gloves remove any large debris and place in the refuse sack STEP 2 SETTING UP Set the machine ready for use as per the user manual supplied Fill refill the water bottle to the correct level Ensure the waste vacuum bucket is empty Open doors and windows in the area to allow the steam to ventilate STEP 3 LETS GET STARTED Fit the microfbre pad to the floor steam mop head fit universal adaptor to mop Connect the steam mop to the steam only extension tube ensuring you lock the clip into position Connect the extension tubes to the hose handle again ensure all locking clips are connected and locked into position Fit the steam only hose into the front of the machine ensuring th
20. sections clean no more than 1 square metre at a time steam clean all vertical surfaces work from top to bottom Ensure passes overlap change microfibre pad when required Ensure all areas have been steam mopped to achieve a clean dry and sanitised surface STEP 5 COMPLETION Use the correct colour coded cloth or paper towel to wipe away any splashes on the skirting boards Steam clean all equipment that has been used and tidy away along with safety warning signs Dispose of gloves and refuse sack Wash and dry hands SEE HEALTH amp SAFETY ON REVERSE MATRIX TRAINING amp SUPPORT Matrix 000 Cleaning Systems Always Think Health amp Safety DO Read and understand user manual before carrying out any cleaning tasks DO Display Safety Warning signs in the correct places DO Lock the steam trigger before changing or connecting accessories DO Report any problems or damage to the machine immediately DO Maintain the machine in accordance with instruction manual DO Use the correct specification of extension lead suitable for the machine DO Ensure correct PPE is worn DO NOT Use the machine if you are untrained DO NOT Use this machine near people children or animals DO NOT Point the steam at other electrical apparatus DO NOT Use the machine to clean the machine down DO NOT Use on Velvet satin or leather DO NOT Leave this machine unattended whilst connected DO NOT Hold or touch the steam outlet
Download Pdf Manuals
Related Search