Home
TUBULAR STEEL WOOD CRIB - Northern Tool + Equipment
Contents
1. TUBULAR STEEL WOOD CRIB USER S MANUAL AN WARNING Read carefully and understand all INSTRUCTIONS before operating Failure to follow the safety rules and other basic safety precautions may result in serious personal injury Item 158501 Thank you very much for choosing a Northern Industrials Tools product For future reference please complete the owner s record below Model Purchase Date Save the receipt warranty and these instructions It is important that you read the entire manual to become familiar with this product before you begin using it This machine is designed for certain applications only The distributor strongly recommends this machine is not modified and or used for any application other than that for which it was designed If you have any questions relative to a particular application DO NOT use the machine until you have first contacted the distributor to determine if it can or should be performed on the product For technical questions and replacement parts please call 1 800 222 5381 GENERAL DESCRIPTION Custom wood crib holds your firewood in a neat stack and helps organize your woodpile Make it any length you like with two 2 x 4s not included Moisture resistant baked on finish Rack helps keep wood dry and termite free Rack ends are 13in W x 44in H GENERAL SAFETY REGULATIONS AA WARNING Read and understand all instructions Failure to follow all instructions listed below may result in se
2. crib 7 DO NOT over stack wood DO NOT stack wood beyond the height of the end pipes 8 DO NOT drop or slam wood onto the wood crib 9 DO NOT move the crib once wood has been loaded ASSEMBLY INSTRUCTIONS Insert two 2 x 4 boards through the horizontal slots in the crib to form the base See Fig 1 Fig 1 O SIDE FRAME Pa EXTEND 2 X 4 BOARDS MINIMUM OF 2 BEYOND SIDE FRAME USE YOUR DESIRED LENGTH 2 X 4 BOARDS NOT INCLUDED Insert two 2 x 4 boards through the horizontal slots in the crib NOTE Do not place the crib ends all the way to the end of the boards They fit loosely to accommodate variance in the boards and can slide off Always extend the 2 x 4 boards minimum of 2 beyond the side frames 2 If your wood is longer than 13 place the crib far enough away from the wall so your log length can be stacked centered across the boards Or it may tip over due to front heavy WARNING Make sure the crib is sturdy and firmly attached with the boards before stacking wood Page 2 of 3 WARRANTY One year limited warranty WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are e lead from lead based paints e crystalline silica from bricks and ce
3. e operation of this product Replace damaged or worn parts immediately e Do not overreach Keep proper footing and balance at all times to prevent tripping falling back injury etc e DO NOT use the equipment when tired or under the influence of drugs alcohol or medication A moment of inattention while operating this equipment may result in serious personal injury e Industrial applications must follow OSHA requirements Page 1 of 3 GUIDE TO SAFETY OPERATION WARNING The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator To ensure safe and efficient operation it is essential to read and follow each of these warnings and precautions 1 Use the crib only on flat surfaces The crib may tip over if uses on an unstable surface 2 It is recommended for use on a hard surface such as a concrete patio or gravel 3 Use CAUTION when erecting the frame with 2 x 4 s Use safety goggles during installation 4 Close attention must be paid to fire safety regulations occupational safety aspects and convenience when planning the storage of firewood 5 Choose the location of the crib carefully Keep away from electrical wires 6 DO NOT smoke or use open flame devices in or around the
4. ment and other masonry products and e arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particles Distributed by Northern Tool Equipment Co Inc Burnsville MN 55306 NorthernTool com Made in China Page 3 of 3
5. rious bodily injury or death and or property damage WaRNING The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur It must be understood by the operator that common sense and caution are factors that cannot be built into this product but must be supplied by the operator e Keep the work area clean and dry Damp or wet work areas can result in injury e Keep children away from work area Do not allow children to handle this product e Always wear ANSI approved safety glasses and heavy duty work gloves during assembly and use Do not wear loose clothing or jewelry which can get caught in moving parts e Store idle equipment When not in use tools and equipment should be stored in a dry location to inhibit rust Always lock up tools and equipment and keep out of reach of children e Use the right tool for the job Do not attempt to force small equipment to do the work of larger industrial equipment There are certain applications for which this equipment was designed It will do the job better and more safely at the capacity for which it was intended Do not modify this equipment and do not use this equipment for a purpose for which it was not intended e Check for damaged parts Before using this product carefully check that it will operate properly and perform its intended function Check for damaged parts and any other conditions that may affect th
Download Pdf Manuals
Related Search
Related Contents
système intégré de récupération et d`élimination Indicador peso-tara Indicateur poids-tare Weight-tare Microsoft MN-820 Wireless Office Headset User Manual PASCO Specialty & Mfg. PI-8127 User's Manual "service manual" R650 GENERATOR SERVICE MANUAL CoolFun CX26, CXT26, CX30 HP 51649A NEC J180 S I S I * AMS2 USER MANUAL * RELEASE 10.0 Copyright © All rights reserved.
Failed to retrieve file