User Manual for Skim Portable
Contents
1. distributor or the factory Spare part Item no Oil reservoir 0 4200 Motor gearbox 1 4201 Battery 2 4202 Lock screw 3 4203 Pulling roll 4 4204 Battery recharger 5 4205 On off switch 6 4206 Handle 7 4207 Rubber ring 8 4208 Heavy weight roll 9 4209 Can only be replaced at the factory Declaration of conformity CE Declaration We SSR TRADE Sundparken 7 DK 3600 Frederikssund declare under our sole responsibility that this products Oil Skimmer Skim Portable to which this declaration relates is in conformity with the following standards EN 292 1 91 EN 292 2 91 amp EN 60742 88 following the provisions of 89 392 EEC amp 73 23 EEC directives This oil skimmer is CE certified Warning Never use the Oil Skimmer in explosive environments CE2. SSR TRADE High quality low costs User Manual for Skim Portable Technical Features Band width 60 mm Power Supply 12 V DC 1500 mA built in battery recharger included Capacity Max 5 0 litres oil pr hour Max temp 60 C 140 F bath temperature Dimensions amp weight Reservoir capacity Band lenghts mm Thank you for purchasing this oil skimmer Skim Portable is a quality product made in electro polished stainless steel Unpack the oil skimmer and check the parts according to the following list 225 x 205 x 120 mm 1 55 kg 1 3 litres 400 2000 mm 100 mm interval Special requests for bands can of course be made 1 Oil Skimmer 1 Battery charger Band total length 400 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm 1600 mm 1700 mm 1800 mm 1900 mm 2000 mm Item no 60M 400 60M 500 60M 600 60M 700 60M 800 60M 900 60M 1000 60M 1100 60M 1200 60M 1300 60M 1400 60M 1500 60M 1600 60M 1700 60M 1800 60M 1900 60M 2000 J 1 Heavy weight roll e 1 band length as ordered Before use charge the battery for at least 16 hours To get the best life out of the battery pack check the following guidelines e Only recharge the battery when the Oil Skimmer has decreased speed to almost stopping Do not let the Oil Skimmer run until the battery is completely exhausted or allow the battery to discharge fully when not in use e Always
3. fully recharge the battery i e for approximately 16 hours Failure to observe this procedure will shorten the life of the battery Observe these simple steps and your battery pack will last for many years approximately 1000 recharge cycles Using the Oil Skimmer When the battery is fully charged place the band around the pulling roller with the weight in the bottom of the band and ensure that the Oil Skimmer runs in a clockwise Direction with the join in the band running gently over the oil scraper without catching Like the drawing on the right Put the unit in a convenient position on the sump to allow the skimming band to break the surface of the fluid Press the on off switch on the top of the unit and the oil removing process will begin The tramp oil removed from the sump will funnel into the Oil Skimmer reservoir in the base of the unit which should be emptied regularly Simply unclip the two snap locks on the side of the reservoir and remove the motor box the top Empty into a suitable receptacle replace on to the Skimmer and you are ready to continue Maintenance Check the band every 6 months and replace if there are any holes or if it worn out See the spare parts list for the correct part number Apart from changing the band the Oil Skimmer will not need additional maintenance and will give many years trouble free operation Spare parts can be obtained from your supplier For other band lengths please contact your
Download Pdf Manuals
Related Search