User Manual - Pdfstream.manualsonline.com
Contents
1. Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the TV at more than a 15 degree tilt Always have two people mount the TV on a wall Product TV size in VESA screw hole specs Standard Quantity Family inches A B in millimeters Screw 19 22 75X75 M4 26 100 X 100 LED TV 32 40 200 X 200 M6 46 60 400 X 400 M8 Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock AN Securing the TV to the Wall A Caution Pulling pushing or climbing onto the TV may cause the TV to fall In particular ensure that your children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all sa2. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Still image warning Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Country Customer Care Center 3 Web Site Avoid displaying still images such as jpeg picture files or still image elements such as TV channel logos panorama or 4 3 image format stock or news bars _MEXICO Oi BOO SAMSUNGA 796M A bel A at screen bottom etc on the screen Constant displaying of still pictures can ARGENTINA 0800 333 3733 Www samsung com cause ghosting of LED screen which will affect image quality To reduce risk of this effect please follow below recommendations BRAZIL ae www samsung com e Avoid displaying the same TV channel for long periods e Always try to display any image on full screen use TV set picture format CHILE 800 SAMSUNG 726 7864 www samsung com menu for best possible match COLOMBIA 01 8000112112 www samsung com e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process _COSTARICA 9 800 507 7267 Wa esarnsung com e Frequently use all TV features designed to reduce image retention and screen DOMINICA 1 800 75
3. amp Depending on the program being broadcast you can listen to Mono Stereo or SAP Auto Volume Because each broadcasting station has its own signal conditions the volume may fluctuate each time channel is changed This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low SPDIF Output The SPDIF Sony Philips Digital InterFace outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater E Audio Format You can select the Digital Audio output SPDIF format The available Digital Audio output SPDIF format may differ depending on the input source amp By connecting the TV to a receiver or home theater with Dolby Digital and 5 1ch speakers and selecting Dolby Digital you can maximize your interactive 3D sound experience E Audio Delay Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver When you select Audio Delay a slider appears Use the left and right arrow buttons to adjust the slider Press ENTER LC when done Oms 250ms Speaker Select E Speaker Select External Speaker TV Speaker If you are listening to t
4. function menu screen The OSD On Screen Display of your TV s feature appears Selects the Source List by moving the controller in the function menu screen The Source List screen appears Selects the Power Off to turn the TV off by moving the controller in the function menu screen amp Exits the menu when pressing the controller more than 1 second amp When selecting the function by moving the controller to the up down left right directions be sure not to press the controller If you press it first you cannot operate it to move the up down left right directions Plug amp Play Initial Setup When you turn the TV on for the first time a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input source is set to TV amp Connecting the power cord and antenna refer to Connections Selecting a language Plug amp Play Select the desired OSD On Screen Display language Selecting a Home Use mode Plug amp Play Select the Home Use mode Store Demo mode is for retail environments e When pressing TV controller the function menu screen appears Select the MENU M and press it more than 5 seconds using the controller The Store Demo mode is set Cancel the Store Demo by selecting Source List and pressing it more than 5 seconds Select Home Use when instaling this TV in your home
5. 4 gt Move C Enter Selecting an antenna Plug amp Play In Cable mode you can select the correct signal source among STD HRC and IRC by pressing the A lt or gt button Setting the Clock Mode Plug amp Play Set the Clock Mode automatically or manually Sere coe Moe e Ifyou select the Auto set the DST Daylight Saving Time Clock Mode J gt Auto 0 gt e On the DST screen press ENTER CF 2 then select whether to turn DST N Daylight Savings Time on or off Select C Enter 0 Skip the time zone where you live NV Viewing the HD Connection Guide The connection method for the best HD screen quality is displayed NV Enjoy your TV Press the ENTER 4 button Oe Oe PC D Sub and PC DVI AUDIO IN input are not supported For HDMI DVI cable connection you must use the HDMI IN 1 DVI jack e For better picture and audio quality connect to a digital device using an HDMI cable e Connecting through the HDMI cable may not be supported depending on the PC e The picture may not display normally if at all or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV If such a problem occurs ask the manufacturer of the external device about the HDMI version and if out of date request an upgrade Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur Using a HDMI Cable
6. DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Da DOLBY Manufactured under license from Dolby Laboratories DIGITAL PLUS Dolby and the double D symbol are trademarks of Dolby PULSE Laboratories Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 0 Digital Out is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved S dts 2 0 Digital Out To send inquiries and requests for questions regarding open sources contact Samsung via Email oss request samsung com This product uses some software programs which are distributed under the Independent JPEG Group ICU License ICU 1 8 1 and later COPYRIGHT AND PERMISSION NOTICE Copyright c 1995 2008 International Business Machines Corporation and others All rights reserved Permission is hereby grant
7. all currently available channels E JH Added Channels Shows all added channels E amp Favorite Shows all favorite channels E Programmed Shows all currently reserved programs amp Using the remote control buttons with the Channel List Green Zoom Enlarges or shrinks a channel number Yellow Select Selects multiple channel lists Select desired channels and press the Yellow button to set all the selected channels at the same time The v mark appears to the left of the selected channels 4 Tools Displays the Channel List option menu The Options menus may differ depending on the situation Channel Status Display icons Icons Operations Vv A channel selected y A channel set as a Favorite A reserved program A program currently being broadcast Memorizing channels Antenna Air Cable Before your television can begin memorizing the available channels you must specify the type of signal source that is connected to the TV i e an Air or a Cable system Auto Program amp When selecting the Cable TV system Selects the cable system STD HRC and IRC identify various types of cable TV systems Contact your local cable company to identify the type of cable system that exists in your particular area At this point the signal source has been selected amp After all the available channels are stored it starts to remove scrambled channels The Auto program me
8. device you have connected to an input on the TV amp Picture Sizes available by Input Source Picture Size 16 9 Zoom1 Zoom2 4 3 Input Source ATV AV Component 480i 480p DTV 1080i 1080p Component 1080i 1080p HDMI 720p 1080 4080p 16 9 Wide Fit 4 3 Screen Fit E Digital Noise Filter Off Low Medium High Auto If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen amp When the signal is weak try other options until the best picture is displayed E HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth amp Available only in HDMI mode RGB signals E Film Mode Off Auto Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality amp Available in ATV DTV interlace AV COMPONENT 480i 1080i and HDMI 480i 1080 E LED Motion Plus Off On Removes drag from fast scenes with a lot of movement to provide a clear picture Picture Reset Resets your current picture mode to its default settings E Reset Picture Mode Returns all picture values in the currently selected mode to the default settings Mode E Standard Selects the normal sound mode E Music Emphasizes music over voices E Movie Provides the best sound for movies E Clear
9. of their respective owners The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HOM 215 Specifications Ch Environmental Considerations Operating Temperature Operating Humidity Storage Temperature 50 F to 104 F 10 C to 40 C 10 to 80 non condensing 4 F to 113 F 20 C to 45 C Storage Humidity 5 to 95 non condensing UN26EH4000 UN32EH4000 UN32EH5000 Modane UN26EH4050 UN32EH4050 UN32EH5050 Display Resolution 1366 x 768 1366 x 768 1920 x 1080 Screen Size 26 Class 32 Class 32 Class Diagonal 26 0 measured diagonally 31 5 measured diagonally 31 5 measured diagonally Sound Output 5W x2 10W x2 Dimensions W x D x H Body 24 2 X 3 6 X 14 3 inches 29 0 X 3 6 X 17 1 inches 29 0 X 3 6 X 17 5 inches 615 1 X 93 3 X 365 6 mm 738 8 X 93 3 X 436 7 mm 738 3 X 93 2 X 444 9 mm With stand 24 2 X 7 1 X 16 5 inches 29 0 X 7 5 X 19 4 inches 29 0 X 7 5 X 19 6 inches 615 1 X 180 7 X 419 2 mm 738 8 X 191 7 X 493 3 mm 738 3 X 191 7 X 498 2 mm Weight Without Stand 9 2 Ibs 4 2 kg 12 5 Ibs 5 7 kg 13 0 Ibs 5 9 kg With Stand 10 3 Ibs 4 7 kg 13 8 Ibs 6 3 kg 14 5 Ibs 6 6 kg UN50EH5000 UN40EH5000 UN46EH5000 Model Name UNSOEHS050 UN40EH5050 UN46EH5050 UNSOEH5070 Display Resolution 1920 x 1080 Screen Size 40 Cl
10. powering on your Samsung television there are a number of things to check before making a call to the service department e If you happen to be using the TV as a monitor and the stand by light only blinks for a few seconds when you press the power button your PC is in sleep mode To take your PC out of sleep mode press a key on your keyboard or move the mouse Then try turning your TV on If you re sure your power cord remote control and PC are functioning properly you may be having a cable issue If you have a cable or satellite box your TV may appear to be off because the cable or satellite box is not outputting a signal To test the signal output of your cable or satellite box press the guide or info button on the cable or satellite box remote control If the screen displays the guide or info data the problem is caused by the box Stand Assembly e If you have any trouble to assemble the stand though you refer to Install the Stand mentioned at separate guide Cannot find channel e Re run plug and play Poor picture First perform the Picture Test and to see if your TV is properly displaying Go to MENU Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may be caused by the source or signal he test image The TV image does not look as good as it did in the store e If you have an analog cable satellite box upgrade to a digital set top box
11. 1 2676 Www samsung com burnout refer to proper user manual section for details ECUADOR 1 800 10 7267 WAN SENSON Securing the Installation Space EL SALVADOR 800 6225 www samsung com Keep the required distances between the product and other objects e g walls GUATEMALA 1 800 299 0013 www samsung com to ensure proper ventilation HONDURAS 800 7919267 www samsung com Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product JAMAICA 1 800 234 7267 Waly Samsung Com NICARAGUA 00 1800 5077267 k amp When using a stand or wall mount use parts provided by Samsung VOST eT Electronics only PANAMA 800 7267 www samsung com If you use parts provided by another manufacturer it may result in a TrA problem with the product or an injury due to the product falling PERY GeO TEENS palatal tl amp The appearance may differ depending on the product PUERTORICO TBO PBR TIEN San eure com amp Be careful when you contact the TV because some parts can be TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 www samsung com somewhat hot VENEZUELA 0 800 100 5303 www samsung com Installation with a stand Installation with a wall mount Se ee a ee aia 1 MEXICO Only IMPORTADO POR SAMSUNG ELECTRONICS MEXICO S A de C V BN68 04499D 00 I i i i l 4inches 4inches 4inches Z AV PRESIDENTE MASARIK 111 INT701 i I I I COL CHAPU
12. 40 x 480 31 469 59 940 25 175 d Vv v 640 x 480 37 861 72 809 31 500 J v x 640 x 480 37 500 75 000 31 500 d v y 800 x 600 37 879 60 317 40 000 v v 800 x 600 48 077 72 188 50 000 v v 800 x 600 46 875 75 000 49 500 Vv v 1024 x 768 48 363 60 004 65 000 f v v 1024 x 768 56 476 70 069 75 000 ae v y 1024 x 768 60 023 75 029 78 750 wv Vv VESA DMT 1152 x 864 67 500 75 000 108 000 BA 1280 x 720 45 000 60 000 74 250 v v 1280 x 800 49 702 59 810 83 500 lt v 1280 x 1024 63 981 60 020 108 000 v 1280 x 1024 79 976 75 025 135 000 Vv 1366 x 768 47 712 59 790 85 500 v v 1440 x 900 55 935 59 887 106 500 lt v 1600 x 900RB 60 000 60 000 108 000 v 1680 x 1050 65 290 59 954 146 250 lt w 1920 x 1080 67 500 60 000 148 500 v Use the remote control within 23 feet from TV Bright light may affect the performance of the remote control Avoid use when nearby fluorescent lights or neon signs The Color and shape may vary depending on the model Channel Menu l QO Seeing Channels Channel List Add delete or set Favorite channels and use the program guide for digital broadcasts Select a channel in the All Channels Added Channels Favorite or Programmed screen by pressing the A buttons and pressing the ENTER C button Then you can watch the selected channel gt a a a fe Sy B 5 5 a a Zoom Select 4 Tools gt Next Program E Q All Channels Shows
13. E button to DVI cable you should set the TV to DVI PC mode under Edit Name 2 Select a desired external input source E TV AV Component HDMI1 DVI HDMI2 amp You can only choose external devices that are connected to the TV In the Source List connected inputs will be highlighted amp When connecting an AV devices to the HDMI IN 1 DVI port with HDMI to DVI cable you should set the TV to DVI mode under Edit Name Information How to use Edit Name You can see detailed information about the connected external device Edit Name lets you associate a device name to an input source To access Edit Name press the TOOLS button in Source List The following selections appear under Edit Name RemoteControh n a This remote control has Braille points on the Power Channe Turns the TV on and off Press to directly access to channels Press to select additional channels digital being broadcasted by the same station For example to select channel 54 3 press 54 then press and 3 Adjusts the volume Displays the channel list on the screen Views the Media Play __ Quickly select frequently used functions Selects the on screen menu items and changes the values seen on the menu Returns to the previous menu P SIZE Lets you choose the picture size MTS Press to choose stereo mono or Separate Audio Program SAP broadcast CC Controls the caption decoder Displ
14. LTEPEC MORALES C P 11570 DELEGACION MIGUEL HIDALGO MEXICO DISTRITO FEDERAL Tel 01 55 5747 5100 01 800 726 7864 Accessories e Remote Control amp Batteries AAA x 2 e Warranty Card Safety Guide e Wire Holder Stand Owner s Instructions e Power Cord Input Cables Sold Separately e RS232 e Audio e HDMI e HDMI DVI e Component e Composite AV e Coaxial RF amp Check the cable before plug in Cable Ports HDMI USB Optical A Do not plug cable upside down Be sure to check before plug in TV Controller Panel Key Function menu TV Controller FAMSUNG Power on Adjusting the volume Selecting a channel Using the function menu Selecting the Media Play Selecting the MENU I0 Selecting the Source List Power Off Remote control sensor Turns the TV on by pressing the controller in standby mode Adjusts the volume by moving the controller from side to side when the power is on Selects a channel by moving the controller up and down when the power is on Press the controller when the power is on then the function menu screen appears If you press it again the function menu screen disappears Selects the MEDIA P by moving the controller in the function menu screen The Media Play main screen appears Selects the MENU II by moving the controller in the
15. MP4 Text Format e Supported Video Formats File 7 2 3 Frame Bit Audio Ercan Container Video Codec Resolution rate fps rate Mbps Codec DivX 3 11 4x 5 1 6 0 1920x1080 6 30 30Mbps MP3 mp4 Mp4 H264 1920x1080 6 30 30Mbps appom AVC 1920x1080 6 30 30Mbps AAC MJPEG 640x480 6 30 10Mbps DivX MP3 3 11 478 1 6 0 1920x1080 6 30 30Mbps cay avi AM MPEG4 SP ASP 1920x1080 6 30 30Mbps LPCM amy My H264 1920x1080 6 30 30Mbps ae MJPEG 640x480 6 30 10Mbps Core DX 3 11 4 x MP3 AED 1920x1080 6 30 30Mbps Aca asf age MPEG4SP ASP 1920x1080 6 30 30Mbps LPCM wmv ADPCM H 264 1920x1080 6 30 30Mbps WMA WMA Pro ts MPEG2 1920x1080 6 30 30Mbps AC3 tp AAC TS MP3 ap H sees MP 1920x1080 6 30 30Mbps DD m2ts HE AAC dat MPEG1 1920x1080 24 25 30 30Mbps AC3 mpg PS MPEG2 1920x1080 24 25 30 30Mbps MPEG mpeg H 264 BP MP LPCM vob IMP 1920x1080 6 30 30Mbps AAC MPEG4 SP ASP 1920x1080 6 30 30Mbps 3gp 3GPP MP3 H 264 1920x1080 6 30 30Mbps fv flash H 264 1920x1080 6 30 30Mbps b 3 swf formats Sorenson H 263 1920x1080 6 30 30Mbps Other Restrictions e Video content will not play or not play correctly if there is an error in the content or the container Sound or video may not work if the contents have a standard bit rate frame rate above the compatible Frame sec listed in the table above e f the Index Table is in error the Seek Jump function is not su
16. USB storage device is approximately over 4000 the files and folders may not appear and some folders may not be opened The maximum displayed number of files including sub folders in one folder of USB storage device is 2000 The media may not be playing smoothly when using the device lower than USB 2 0 Videos SP Movie 01 avi D Return 1 Press the lt or gt button to select Videos then press the ENTER C button in the Media Play menu 2 Press the lt A button to select the desired video in the file list 3 Press the ENTER C button or gt Play button The selected file is displayed on the top with its playing time If video time information is unknown playing time and the progress bar are not displayed During video playback you can search using the lt and gt button amp In this mode you can play movie clips contained in a game but you cannot play the game itself Supported Subtitle Formats Internal External Name File extension MPEG 4 timed text txt SAMI smi SubRip srt SubViewer sub Micro DVD sub or txt SubStation Alpha ssa Advanced SubStation Alpha aSS Name Container Format Xsub AVI Picture Format SubStation Alpha MKV Text Format Advanced SubStation MKV Text Format Alpha SubRip MKV Text Format MPEG 4 Timed text
17. Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD channels from the channel line up Air Cable Antenna connection Try HD channels after performing Auto program amp Many HD channels are up scaled from SD Standard Definition contents e Adjust the Cable Set top box video output resolution to 1080i or 720p The picture is distorted macroblock error small block dots pixelization e Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies e A weak signal can cause picture distortion This is not a TV problem e Mobile phones used close to the TV within 3 3ft may cause noise in the picture on analog and digital channels Color is wrong or missing e If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause color problems or a blank screen siae There is poor color or brightness Adjust the Picture options in the TV menu go to Picture Mode Color Brightness Sharpness Adjust Energy Saving option in the TV menu go to MENU Setup Eco Solution Energy Saving Try resetting the picture to view the default picture setting go to MENU Picture Picture Reset There is a dotted line on the edge of he screen If the picture size is set to Screen Fit change it to 16 9 Chan
18. Voice Emphasizes voices over other sounds E Amplify Increase the intensity of high frequency sounds to allow a better listening experience for the hearing impaired Equalizer standard sound mode only E Balance L R Adjusts the balance between the right and left speaker E 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies E Reset Resets the equalizer to its default settings SRS TruSurround HD standard sound mode only SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats Preferred Language digital channels only Digital TV broadcasts are capable of simultaneous transmission of many audio tracks for example simultaneous translations of the program into foreign languages amp You can only select a language from among the ones being broadcasted Multi Track Sound MTS analog channels only E Mono Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal E Stereo Choose for channels that are broadcasting in stereo E SAP Choose to listen to the Separate Audio Program which is usually a foreign language translation
19. ass 46 Class 50 Class Diagonal 40 0 measured diagonally 45 9 measured diagonally 49 5 measured diagonally Sound Output 10W x 2 Dimensions W x D x H Body 36 5 X 3 6 X 21 6 inches 41 7 X 3 7 X 24 6 inches 44 7 X 3 7 X 26 3 inches 927 6 X 93 0 X 551 0 mm 1059 8 X 94 3 X 625 6 mm 1137 6 X 94 5 X 669 4 mm With stand 36 5 X 8 9 X 23 8 inches 41 7 X 8 9 X 26 7 inches 44 7 X 8 9 X 28 5 inches 927 6 X 227 6 X 606 5 mm 1059 8 X 227 6 X 680 7 mm 1137 6 X 227 6 X 725 0 mm Weight Without Stand 19 8 Ibs 9 0 kg 27 5 Ibs 12 5 kg 34 6 Ibs 15 7 kg With Stand 24 2 Ibs 11 0 kg 31 9 Ibs 14 5 kg 40 3 Ibs 18 3 kg amp Design and specifications are subject to change without prior notice amp This device is a Class B digital apparatus amp For information about power supply and more about power consumption refer to the label attached to the product amp Typical power consumption is measured according to Energy Star Program requirements for Televisions 246
20. ay Modes HDMI DVI Input Optimal resolution 4000 series 1366 x 768 60Hz 5000 series 1920 x 1080 60Hz Disp time EXIT R B Exit Cc Use direci size wms co f m Use J gt Lt SAMSUNG WY and Volume buttons and can be used by visually impaired persons jp Displays and selects the available video 7 sources a p Gt Turns the remote control light on or off When on the buttons become illuminated for a 2 moment when pressed Using the remote control with this button set to On will reduce the battery usage time Returns to the previous channel Changes channels lays the main on screen menu Automatically shuts off the TV at a preset Displays information on the TV screen he menu hese bu ons according to the ion on screen hese bu ons in a specific feature Installing batteries Battery size AAA amp NOTE Horizontal ea Pixel Clock Syne Mode Resolution Frequency Frequency Polarity 1366x768 1920x1080 Kig Freeney 2 v 640 x 350 31 469 70 086 25 175 v v mM 720 x 400 31 469 70 087 28 322 lt v v 640 x 480 35 000 66 667 30 240 v Vv MAG 832 x 624 49 726 74 551 57 284 J v v 1152 x 870 68 681 75 062 100 000 j v 6
21. ct polarity Clean the transmission window located on the top of the remote control Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control does not turn the TV on or off or adjust the volume Program the Cable Set top box remote control to operate the TV Refer to the Cable Set top box user manual for he SAMSUNG TV code A Mode Not Supported message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual siis Caption on the TV menu is greyed out e You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component e Caption must be activated on the external device There is a plastic smell from the TV e This smell is normal and will dissipate over time TV Signal Strength is unavailable in the Self Diagnosis Test menu e This function is only available for digital channels from an Antenna RF Coax connection TV is tilted to the right or left side e Remove the stand base from the TV and reassemble it The Channel menu is grey out unavailable e The Channel menu is only available when you select the TV source Your settings are lost after 30 minutes or every time the TV is turned off e f TV is in the Store Demo mode it wil mode go to MENU Setup Plug re
22. e the fg icon amp The position and color may differ depending on the model Assembling the Wire Holder stand ee Troubleshooting If the TV seems to have a problem first review this list of possible problems and solution If none of these troubleshooting tips apply visit samsung com then click on Support or call Samsung customer service Problem Possible Solution Flickering and Dimming If your Samsung Television is flickering or dimming sporadically you may need to disable some of its energy efficient features like the Eco Sensor or the Energy Saving feature If you follow below step with your remote you can turn these features off or on e Energy saving User Menu gt Setup Eco Solution Energy Saving e Eco Sensor User Menu Setup Eco Solution Eco Sensor Component Connections Screen Color If you find that the color on your Samsung television s screen is not correct or black and White first run a Self Diagnosis on the TV to make sure there are no device issues e Self Diagnosis User Menu Support Self Diagnosis Picture Test e If the test is ok try making sure e Your connections are all consistent For example if you ve used the AV In jack on your TV make sure you have used the AV Out jack on your video source e Try making sure you have connected to the correct jacks For example if you use the Component jacks labeled Pb Pr and Y to connect
23. ed When the TV is turned off by Sleep Timer function Auto Protection Time E Auto Protection Time Off 2 hours 4 hours 8 hours 10 hours If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen Eco Solution E Energy Saving Off Low Medium High Picture Off This adjust the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen E Eco Sensor Off On for LED 5000 series To enhance your power savings the picture settings will automatically adapt to the light in the room amp If you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When Eco Sensor is On the minimum screen brightness can be adjusted manually amp If Eco Sensor is On the display brightness may change become slightly darker in most cases depending on the surrounding light intensity E No Signal Power Off Off 15 min 30 min 60 min Sets how quickly the TV switches to standby mode if no picture is being received amp Disabled when the PC is in power saving mode E Auto Power Off Off On The TV will be automatically turned off when no user operation is received for 4 hours Support Menu E Picture Test Use to check for picture p
24. ed free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute and or sell copies of the Software and to permit persons to whom the Software is furnished to do so provided that the above copyright notice s and this permission notice appear in all copies of the Software and that both the above copyright notice s and this permission notice appear in supporting documentation THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Except as contained in this notice the name of a copyright holder shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior written authorization of the copyright holder All trademarks and registered trademarks mentioned herein are the property
25. edium High Adjusts the screen contrast E Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth E Flesh Tone Emphasize pink flesh tone E Motion Lighting Off On Reduce power consumption by brightness control adapted motion amp Available in Standard mode only Picture Options amp When connecting a PC you can only make changes to the Color Tone Size and HDMI Black Level E Color Tone Cool Standard Warm1 Warm2 amp Warm1 or Warm2 will be deactivated when the picture mode is Dynamic E Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time 16 9 Sets the picture to 16 9 wide mode Zoom1 Use for moderate magnification Zoom2 Use for a stronger magnification Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen 4 3 Sets the picture to basic 4 3 mode amp Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and center of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit DTV Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are inputted amp HD High Definition 16 9 1080i 1080p 1920x1080 720p 1280x720 amp Settings can be adjusted and stored for each external
26. een English Espa ol and Fran ais Game Mode When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting the game menu amp Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly amp Game Mode is not available when the input source is set to TV amp After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality Caption On Screen Text Messages E Caption You can switch the caption function on or off If captions are not available they will not be displayed on the screen amp The Caption feature does not work in Component or HDMI mode E Caption Mode You can select the desired caption mode Default CC1 CC4 Text1 Text4 analog channels only The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV Depending on the broadcasting signal the Analog Caption function may or may not work with digital channels Default Service1 Service6 CC1 CC4 Text1 Text4 digital channels only The Digital Captions function works with digital channels amp Service1 6 may not be available in digital caption mode depending on the broadcast E Digital Capt
27. fety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows To prevent the TV from falling amp Since the necessary clamps screws and string are not supplied please purchase these additionally 1 Drive the screws into the clamps and firmly fasten them onto the wall Make sure the screws are firmly fixed into the wall 2 Remove the screws from the back center of the TV put the screws into the clamps and then fasten the screws onto the TV again 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly amp Verify all connections are properly secured Periodically check the connections for any sign of fatigue or failure If you have any doubt about the security of your connections contact a professional installer amp Install the TV close to the wall so that it does not fall amp Itis safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV Untie the string before moving the TV Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using it in a public place Refer to the manual provided with the Kensington Lock for additional information on proper use amp Please find a R icon on the rear of the TV The Kensington slot is besid
28. ge cable satellite box resolution The picture is black and white If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changing channels the picture eezes or is distorted or delayed If connected to a cable box please try to reset it reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set output resolution of the cable box to 1080i or 720p Sound Problem First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume Please check the volume of the device Cable Sat Box DVD Blu ray etc connected to your TV The picture is good but there is no sound if you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV Reboot the connected device by reconnecting the device s power cable The speakers are making an inappropriate noise Check the cable connections Make sure a video cable is not connected to an audio input For Antenna or Cable connections check the signal information A weak signal may cause sound distortion Perform the Sound Tes
29. he sound track of a broadcast or movie through an external receiver you may hear a sound echo caused by the difference in decoding speed between the TV s speakers and the speakers attached to your audio receiver If this occurs set the TV to External Speaker amp When you set Speaker Select to External Speaker the TV s speakers are turned off You will hear sound through the external speakers only When you set Speaker Select to TV Speaker both the TV s speakers and the external speakers are on You will hear sound through both When Speaker Select is set to External Speaker the VOLUME and MUTE buttons will not operate and the sound settings will be limited If there is no video signal both the TV s speakers and the external speakers will be mute amp Sound Reset E Reset All Resets all sound settings to the factory defaults A Setting the Time Time amp The current time will appear every time you press the INFO button E Clock Setting the clock is for using various timer features of the TV amp If you disconnect the power cord you have to set the clock again Clock Mode Set the current time manually or automatically Clock Set Set the Month Day Year Hour Minute and am pm amp Available only when Clock Mode is set to Manual Time Zone Select your time zone DST Daylight Saving Time Switches the DST Daylight Saving Time function on or off amp DST and Time Zone function is only available whe
30. ication number before any of the Program Rating Lock restrictions are set up or changed amp Program Rating Lock is not available in HDMI or Component mode amp The default PIN number of a new TV set is 0 0 0 0 E Program Rating Lock You can block rated TV Programs E TV Parental Guidelines You can block TV programs depending on their rating This function allows you to control what your children are watching E MPAA Rating You can block movies depending on their MPAA rating The Motion Picture Association of America MPAA has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children E Canadian English You can block TV programs depending on their Anglophone Canadian E Canadian French You can block TV programs depending on their French Canadian rating E Downloadable U S Rating Parental restriction information can be used while watching DTV channels E Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter it in Enter New PIN Re enter the same 4 digits in Confirm New PIN When the Change PIN screen disappears press the OK button The TV has memorized your new PIN amp If you forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 POWER off MUTE gt 8 2 gt 4 POWER on Language Set the menu language amp Choose betw
31. ion Options digital channels only Size Options include Default Small Standard and Large The default is Standard Font Style Options include Default and Styles 0 default is Style 0 Foreground Color Options include Default Whit Green Blue Yellow Magenta and Cyan You can change the color of the letter The default is White Background Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the background color of the caption The default is Black Foreground Opacity This adjusts the opacity of text Options include Default Transparent Translucent Solid and Flashing Background Opacity This adjusts the opacity of the caption background Options include Default Transparent Translucent Solid and Flashing Return to Default This option sets each Size Font Style Foreground Color Background Color Foreground Opacity and Background Opacity to its default amp Digital Caption Options are available only when Default and Service1 Service6 can be selected in Caption Mode amp The Foreground and Background cannot be set to have the same color Melody Set so that a melody plays when the TV is turned on or off amp The Melody does not play When no sound is output from the TV because the MUTE button has been pressed When no sound is output from the TV because the volume has been reduced to minimum with the VOL button o 7 The e Black R
32. is displayed move to any file in desired group 2 Press the TOOLS button and then select Play Folder Media Play Additional Functions E Videos Music Photos Play Option menus When playing a file press the TOOLS button Category Operation Videos Music Photos Title You can move the other file directly Vv You can play movie and music files Repeat Mode repeatedly WA x Picture Size You can adjust the picture size to your Vv preference Picture Mode You can adjust the picture setting v Vv Sound Mode You can adjust the sound setting Vv v v You can play the video with Subtitles This Subtile Setting function only works if the subtitles are the A same file name as the video Audio Format You can select the digital audio output vy format Audio You can change the audio language if the Language video has more than one language v Stop Slide Show r Start Slide You can start or stop a Slide Show v Show Slide Show You can select the slide show speed Speed during the slide show v Background You can set and select background music Music when watching a Slide Show v Zoom You can zoom into images in full screen Vv mode Rotate You can rotate images in full screen Vv mode i You can see detailed information about Information the played file v v v Settings Using the Setup Menu E DivX Video On Demand Shows the registration code authorized for the TV If you c
33. ms will be displayed in the Programmed menu amp When a digital channel is selected press the gt Next Program button to view the digital program If you select the ENTER C4 Schedule button on the next program you can set Timer Viewing directly E Channel Name Edit analog channels only Assign your own channel name E Select All Select all the channels in the channel list E Deselect All Deselect all the selected channels amp You can only select Deselect All when one or more channels are selected E Auto Program Scans for a channel automatically and stores in the TV Programmed in Channel List You can view modify or delete a show you have reserved to watch E Change Info Change a show you have reserved to watch E Cancel Schedules Cancel a show you have reserved to watch E Information Display a show you have reserved to watch You can also change the reservation Information E Select All Deselect All You can select or deselect all channels in the channel list Channel Mode Change the channel mode directly between Added Channels and Favorite Channels amp The Favorite Channels is enabled only when you set Add to Favorite Fine Tune analog channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually amp Fine tuned channels
34. n the Clock Mode is set to Auto E Sleep Timer Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes amp To cancel the Sleep Timer select Off Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first E On Time Off Time Set the hour minute am pm and Activate Inactivate To activate the timer with the setting you have chosen set to Activate E Volume Set the desired volume level Contents When the On Time is activated you can turn ona specific channel or play back contents such as photo or audio files TV USB Select TV or USB Make sure that an USB device is connected to your TV Antenna Displays the current antenna source Channel Select the desired channel Music Photo Select the folder containing MP3 JPEG files on the USB device amp The maximum displayed number of files including sub folders in one folder of USB storage device is 2000 amp The media may not be playing smoothly when using the device lower than USB 2 0 E Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer Q Other Features Program Rating Lock The Program Rating Lock feature automatically locks out programs that are deemed inappropriate for children The user must enter a PIN personal identif
35. ng the sticker Please clean it to watch TV amp The exterior and screen of the product can get scratched during cleaning Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches a Clean the product with a soft cloth dampened Do not spray water directly onto the product e P ese z with in a small amount of water Do not use a Any liquid that goes into the product may are 3 3 4 flammable liquid e g benzene thinners or a cause a failure fire or electric shock AS 4 q cleaning agent License TheaterSound SRS and the symbol are trademarks of Open Source License Notice S fS C O SRS Labs Inc Open Source used in this product can be found on the following webpage http TheaterSound y TheaterSound technology is incorporated under licence opensource samsung com Open Source License Notice is written only English from SRS Labs Inc SRS TheaterSound provides the most immersive surround sound experience from the TVs built in speakers while maintaining steady volume and delivering rich bass and clear dialog DivX Certified to play DivX video up to HD 1080p including premium content DIVX HD ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT
36. nu then reappears amp Press the ENTER C4 button to stop the channel store during Auto Program How to Stop Auto Programming 1 Press the ENTER C button 2 A message will ask Stop Auto Program Select Yes by pressing the lt or gt button 3 Press the ENTER C button Q Other Features Clear Scrambled Channel This function filters out scrambled channels after Auto Program is completed This process may take up to 20 30 minutes amp Press the ENTER C4 button to stop the Clear Scrambled Channel amp This function is only available in Cable mode Channel List Channel List Option Menu Set each channel using the Channel List menu options Option menu items may differ depending on the channel status E Add Delete Delete or add a channel to display the channels you want amp All deleted channels will be shown on the All Channels menu amp A gray colored channel indicates the channel has been deleted amp The Add menu only appears for deleted channels amp Delete a channel from the Added Channels or Favorite menu in the same manner E Add to Favorite Delete from Favorite EASA Set channels you watch frequently as Favorites E Timer Viewing You can set a desired channel to be displayed automatically at the set time even when you are watching another channel Set the current time first to use this function amp Only memorized channels can be reserved amp Reserved progra
37. ogram to add available channels to the channel list go to MENU Channel Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu There are 3 options STD HRC and IRC Verify the antenna is positioned correctly No Caption on digital channels Check the Caption Setup menu Try changing Caption Mode Service 1 to CC1 Some channels may not have caption data The picture is distorted macroblock error small block dots pixelization Compression of video contents may cause picture distortion Especially on fast moving pictures such as sports and action movies A weak signal can cause picture distortion This is not a TV problem Others Purple green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection Remove the left and right audio connections from the set top box If the buzzing stops this indicates that the set op box has a grounding issue Replace the Component video cables with an HDMI connection The picture will not display in full screen HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the Top amp Bottom will be shown on movies that have aspect ratios different from your TV Adjust the picture size option on your external device or change the TV to full screen The remote control does not work Replace the remote control batteries with corre
38. onnect to the DivX web site and register with 10 digit registration code you can download the VOD activation file Once you play it using Media Play the registration is completed amp For more information on DivX VOD visit http vod divx com E Information Select to view information on the connected device Sadie Other Information Installing the Wall Mount Kit The wall mount kit sold separately allows you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the wall mount items Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own Wall Mount Kit Specifications VESA amp The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If you install the TV on a ceiling or slanted wall it may fall and result in severe personal injury amp NOTE Standard dimensions for wall mount kits are shown in the table below When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided Do not use screws that do not comply with the VESA standard screw specifications
39. pported e The menu may take longer to appear if the video s bit rate exceeds 10Mbps e Video content can not be played if there are many contents in one file Video Decoder Supports up to H 264 Level 4 1 H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not supported MPEG4 SP ASP Below 1280 x 720 60 frame max Above 1280 x 720 30 frame max H 263 is not supported GMC is not support Audio Decoder Supports up to WMA7 8 9 STD 9 PRO 10 PRO WMA 9 PRO and WMA 10 PRO support 5 1 channel LBR mode of WMA Pro is not supported WMA Lossless is not supported 10 I Love you 01 10 04 02 use lt b Jump 2 Tools 1 Press the lt or gt button to select Music then press the ENTER C button in the Media Play menu 2 Press the lt A button to select the desired Music in the file list 3 Press the ENTER C button or gt Play button amp During music playback you can search using the lt and gt button Q amp Q J REW and gt gt FF buttons do not function during play amp Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Photos Noma ext 4 Tools 9 Ret
40. roblems If the problem Self Diagnosis continues to occur check the color pattern E Sound Test Use the built in melody sound to check for sound problems E Signal Strength digital channels only An HD channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength E Reset Reset all settings to the factory defaults amp The PIN input screen appears before the setup screen amp Enter your 4 digit PIN Change the PIN using the Change PIN option Software Upgrade Software Upgrade can be performed by downloading the latest firmware from samsung com to a USB memory device HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centers and how to download products and software Media Play Ll Enjoy photos music and or movie files saved on a USB Mass Storage Class MSC device Q Connecting a USB Device 1 Turn on your TV 2 Connect a USB device containing photo music and or movie files to the USB jack on the side of the TV 3 When USB is connected to the TV you can select Media Play USB in Application menu Q Using the Media Play Menu Media Play Videos a x HE suu Change C Enter 9 Return 1 Press the MENU bu
41. set audio and picture settings every 30 minutes Please change from Store Demo mode to Home Use mode using the Plug amp Play procedure Press the SOURCE button to select TV amp Play ENTER C You have intermittent loss of audio or video e Check the cable connections and reco nnect them e Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV o the wall we recommend using cables with 90 degree connectors You see small particles when you look closely at the edge of the frame of the TV This is part of the product s design and is not a defect POP TV s internal banner ad appears e Select Home Use under Plug amp Play mode on the screen For details refer to Plug amp Play Initial Setup amp This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels wil have no impact on the performance of the product amp Some functions and pictures shown in this manual are available on specific models only You can keep your TV as optimum condition to upgrade the latest firmware on web site samsung com Support gt Downloads by USB Storage and Maintenance if you attached some stickers on the TV screen it remains some debris after removi
42. t as explained above No Picture No Video The TV will not turn on Make sure the AC power cord is securely plugged into the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to Remote control does not work below The TV turns off automatically Ensure the Sleep Timer is set to Off in the Time menu If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When you are watching TV connected to an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal There is no picture video Check the cable connections Remove and reconnect all cables connected to the TV and external devices Set your external device s Cable Sat Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the remote control Reboot the connected device by reconnecting the device s power cable RF Cable Antenna Connection The TV is not receiving all channels Make sure the coaxial cable is connected securely Please try Auto Pr
43. that have been downloaded from a for pay site Digital Rights Management DRM is a technology that supports the creation distribution and management of digital content in an integrated and comprehensive way including protecting the rights and interests of content providers preventing illegal copying of contents and managing billings and settlements PTP device is not supported If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction If the TV has no input during the time set in Auto Protection Time he Screensaver will run The power saving mode of some external hard disk drives may be released automatically when your connect them to the TV If you use a USB extension cable the TV may not recognize the USB device or may not be able to read the files on the device If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to a PC format the device and check the connection If a file you deleted from the PC is still found when you run Media Play use the Empty the Recycle Bin function on the PC to permanently delete the file Photos only supports sequential jpeg format The scene search and thumbnail functions are not supported in the Videos If the number of files and folders saved on a
44. that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner amp To reset the fine tuning select Reset Mode Select your preferred picture type amp When connecting a PC you can only select Entertain and Standard Dynamic Suitable for a bright room E Standard Suitable for a normal environment E Movie Suitable for watching movies in a dark room E Entertain Suitable for watching movies and games amp Only available when connecting a PC Backlight Contrast Brightness Sharpness Color Tint G R Your television has several setting options for picture quality control amp When connecting a PC you can only make changes to Backlight Contrast Brightness and Sharpness Advanced Settings available in Standard Movie mode Compared to previous models new Samsung TVs have a more precise picture amp When connecting a PC you can only make changes to Gamma and White Balance E Color Space Auto Native Adjusts the range of colors available to create the image E White Balance Adjusts the color temperature for a more natural picture R Offset G Offset B Offset Adjusts each color s red green blue darkness R Gain G Gain B Gain Adjusts each color s red green blue brightness Reset Resets the White Balance to it s default settings E Gamma Adjusts the primary color intensity E Dynamic Contrast Off Low M
45. tton Press the A or W button to select Application then press the ENTER C button 2 Press the A or V button to select Media Play USB then 3 press the ENTER C button Press the lt or gt button to select an icon Videos Music Photos Settings then press the ENTER C button amp It might not work properly with unlicensed multimedia files amp Need to Know List before using Media Play USB The file system supports FAT16 FAT32 and NTFS Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives and Flash Card Readers Devices should be connected directly to the TV s USB port USB HDD is not supported Before connecting your device to the TV please back up your iles to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss A USB device that requires high power more than 0 5A may not be supported Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360 x 8640 pixels f a file is corrupted or the TV does not support the file type the Not Supported File Format message appears The TV cannot play MP3 files with DRM
46. up to 1080p The side panel may differ depending on the model If an HDMI to DVI cable is connected to the HDMI IN 1 DVI port the audio does not work EX LINK Connector for service only Power Input Goe TV Side Panel Blu ray player DVD cable box sat box Using an Audio Analog Cable COMPONENT AV IN O IN AUDIO PJ f A ne TV Rear Panel m DVD Home Theater ANT IN AUDIO OUT Using a HDMI to DVI Cable DIGITAL AUDIO OUT OPTICAL VHF UHF Antenna Coe pel Nl N i Using a USB Drive Ma m Cable U U T UUT pie deet Using an Optical Digital Cable AUDIO OUT a COMPONENT OUT 2 JLo ON EE M S Digital Audio System VCR Blu ray player A E VCR DVD Cable STB Satellite STB PVR STB AV Changing the Input Source Receiver Game Camcorder PC DVI PC DVI TV IPTV Blu ray HD DVD DMA Name the device connected to the Source List input jacks to make your input source selection easier E amp When connecting a PC to the HDMI IN 1 DVI port with HDMI Use to select TV or an external input source such as a DVD player cable you should set the TV to PC mode under Edit Name Blu layer cable bo TB satellite receiver lu ray player cable box STB satellite receiver amp When connecting a PC to the HDMI IN 1 DVI port with HDMI 1 Press the SOURC
47. urn 1 Press the lt or gt button to select Photos then press the ENTER C button in the Media Play menu 2 Press the lt A button to select the desired photo in the file list 3 Press the ENTER C button or gt amp NOTE While a photo list is displayed press the gt Play ENTERC button on the remote control to start the slide show Play button All files in the file list section will be displayed in the slide show During the slide show files are displayed in order During the slide show you can adjust the slide show speed using Caa REW or gt gt FF button You can move to other file using lt or gt button e Supported Photo Formats Image Photo Resolution Base line 15360 x 8704 JPEG Progressive 1024 x 768 Other Restrictions e CMYK YCCK Color space JPEG are not supported Playing Multiple Files E Playing selected video music photo files 1 Press the Yellow button in the file list to select the desired file 2 Repeat the above operation to select multiple files amp NOTE The Y mark appears to the left of the selected files To cancel a selection press the Yellow button again To deselect all selected files press the TOOLS button and select Deselect All 3 Press the TOOLS button and then select Play Selected Contents E Playing the video music photo file group 1 While a file list
48. your TV and video source make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the TV the red Pr jack on the source to the red Pr jack on the TV Screen Brightness you find that the colors on your Samsung TV are correct but just a little too dark or bright there are some settings you should check before calling for a repair e Backlight Contrast Brightness Sharpness Color Tint and so on Go in to Picture on user Menu then try adjusting options mentioned above Unwanted Powering off your Samsung TV appears to turn off by itself there may be an issue with either your Timer settings or your Eco riendly No Signal Power Off feature First make sure you Sleep Timer is not accidentally set The sleep timer allows you the comfort of falling asleep with he TV still on but turns it off after a certain period of time so as not to waste energy Sleep Timer User Menu Setup Time Sleep Timer the Sleep Timer is not activated you may have engaged the No Signal Power Off or Auto Power Off feature e No Signal Power Off User Menu Setup Eco Solution No Signal Power e Auto Power Off User Menu Setup Eco Solution Auto Power Off Trouble Powering On Before Turn on check red light on the right or left bottom of your TV Press power on button on TV or remote and it will blink about 5 times before turning on If you find that you are having trouble
Download Pdf Manuals
Related Search