1760 Power Quality Recorder
Contents
1. Power Quality Recorder 1760 Documentation Install PQ Analyze mom Product Registration Web Links and Tools Adobe Acrobat Reader Exit about this cd l emv04 jpg www netzerotools com SR www netzerotools com Getting Started Manual Running PQ Analyze The first time you run PQ Analyze you are prompted to select your Default Def File This is a configuration template with region specific default values Select the region most appropriate to your location You can change this at any time later using the Options gt Default Def File After the software is installed start PQ Analyze from the Start menu CH Accessories Programs fH PQ Analyze menu PQ Analyze gy Documents Settings 1 Default Def File Search Gemany Austia Switzedand France Help and Support s XP Professional Run emv05 bmp Net eroTools 800 571 6389 www netzerotools com 2 omp 10 www netzerotools com www netzerotools com 1760 Power Quality Recorder Using the Recorder Working with Demo Data Navigate to the PQ Analyze CD ROM and select one of Before connecting the Recorder and downloading real the stored measurements in the demo data folder data familiarize yourself with the basic concepts of the software by testing some of the features with the demo gegen em irectory DAdemo dta el data supplied on the CD ROM oo M Look in 1 demodata2. L 236 20 V 236 5 HAHH d t i VRMSLI H d S IE 09 09 2007 238 0 H f vd dik W OT 04 50 00 j d REG 18h 50m Os 1 9595 V 234 5 YV RMS V Se 1 I E 1 Kc Saat 08 00 08 12 09 00 09 12 10 00 Day Hour emv30 bmp Try the checkboxes hold and add to make your analysis persistent and mix and match different parameters in one window With a few exceptions this basic procedure applies to all data analysis tasks Depending on the virtual instrument different selections and functions are available 14 Communicating with the Recorder Once familiar with the basic concept of data analysis try connecting to the Recorder Supply the Recorder with mains power switch it on connect a voltage sensor to channel 1 and connect the network interface to your PC using the Ethernet cable for direct connection RJ45 crossover cable with red plugs 15 bmp eS Net orotools gesch 800 571 6389 www netzerotools com www netzerotools com www netzerotools com Select menu File gt FLUKE 1760 Start Menu and press Setup in the Live Modes section L Fluke PQ Analyze Start Menu PS Power Quality Recorder Offline Modes Recorded Data Setup Offline Interface Live Modes Pa C RS 232 Modem M Dont show this dialog again emv31 bmp Tools 800 577 6389 www netzerotools com 1760 Power Quality Recorder Usin
3. ww Ripple Contr te tete o m r EEE tHe te Hee mr t zt mg zt Ht tee rat rg Emv08 bmp 12 2 Select the virtual instrument on the left side File demo2 def leet d gt KE Auto Refresh el x Start Difference End Bytes 3 46 MB 07 09 2007 18 43 19 2d 5h 50m 1s sl 10 09 2007 00 33 20 EN50160 Dsy Free Interval Events RMS D Oscilloscope gn o e sate Ripple Contr some zt rn ren rm rt mam rer ettet tome rm mt renz e t rr em teme zg Emv09 bmp Net erofools 800 577 6389 www netzerotools com www netzerotools com www netzerotools com 1760 Power Quality Recorder Using the Recorder 3 Select the parameter group group of related 4 Select the measurement parameter measurement parameters ransfer Service Window Options Help File demo2 def RAO le Gucci Elle PIPE ge 5 Select Minimum Mean or Maximum values EN50 160 pa Cie PR Free Interval k 12 bmp 6 Select your analysis function Ee Ss sl see Ripple Contr L o Teniente 13 bmp emv10 bmp H t T 800 577 6389 www netzerotools com 13 www netzerotools com www netzerotools com 1760 Getting Started Manual The result is displayed in a new window demo2 def Timeplot TI Hold TI Add 07 09 2007 18 40 00 10 09 2007 00 40 00 olx VRMSL1 i SE ei 08 09 2007 10 00 00 i o 8
4. see noise from the open inputs of the voltage sensor www netzerotools com www netzerotools com 1760 Power Quality Recorder Using the Recorder If the test leads are connected to mains voltage you will a Ta see something similar to the waveform below CT Note i 0 8 t ll i Please follow safety instructions when m NI connecting measuring circuits see Safety aw we E Information sme gt wl Hi WI an d pit SE AN Hols T Add o0 oars oazo oeras olx 1 0 ii 2 bebe w 12 200 0 E J as l 250 0 200 0 Time ms VU SE Sg SN mm a mes aa 23306v 100 0 f 150 0 f Tools S Vix airt u 250 0 800 577 6389 www netzerotools com 2 S e S 28 bmp 19 www netzerotools com www netzerotools com 1760 Getting Started Manual Try the Zoom tool to inspect the waveform a little closer 56 bmp Hold Add 26 03 2010 10 57 39 26 03 2010 10 57 39 DS VLI 42 540ms Mi em 184 07 V gt 6 2110ms 45 633 V 280 0 I l I f I I i I 1 I I 3 32 Eu 38 40 42 44 46 48 5 Time ms _ 29 bmp Tools 800 577 6389 www netzerotools com 20 Next Steps This explained the basic concepts used with Fluke 1760 PQ Analyze You now have verified that your Recorde
5. wl E Dh In the Start Menu press Recorded Data in the Offline r aNs Date modified Type Modes section to display the Start Menu select Recent Places L demol det 26 09 2007 13 32 DEF File we gt _ demo2 def 07 03 2008 19 50 DEF File File gt FLUKE 1760 Start Menu W T demo3 det L 17 03 2009 21 22 DEF File Desktop L Fluke PQ Analyze Start Menu PS a Libraries Power Quality Recorder Sauder ta Offline Modes Recorded Data Network Setup Offline File name demo2 def Files of type Template vdf v Cancel Interface Live Modes Geet emv07 bmp RS 232 im Net eroTools M Dont show this dialog again www netzerotools com emv06 bmp 11 www netzerotools com www netzerotools com 1760 Getting Started Manual The main analysis window is shown next It is the starting point for all measurement analysis tasks It shows the virtual instruments on the left side and the ranges of available measurement data as blue bars To display any type of data follow a simple 6 step select process 1 Select the time range by dragging the cursor marks with the mouse File demo2 def leien 4 kA r autoreren Gil x Difference End Bytes Start 07 09 2007 18 43 19 2d 5h 50m 1s D 10 09 2007 00 33 20 H Free Interval i 10 Min Events mnm 44 em tete Et net Feet trett meee va h ta re SHORE AE ttt En tett ett moia N RMS Oscilloscope l on wet tH
6. A Net Tools www netzerotools com 800 571 6389 FLUKE www netzerotools com 1760 BASIC 1 760 1760 Power Quality Recorder 1760TR BASIC 1760 Series Product Page 1760 TR PN 2713103 June 2006 Rev 2 7 10 2006 2010 Fluke Corporation All rights reserved Specifications are subject to change without notice All product names are trademarks of their respective companies www netzerotools com www netzerotools com LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service The warranty period is two years and begins on the date of shipment Parts product repairs and services are warranted for 90 days This warranty extends only to the original buyer or end user customer of a Fluke authorized reseller and does not apply to fuses disposable batteries or to any product which in Fluke s opinion has been misused altered neglected contaminated or damaged by accident or abnormal conditions of operation or handling Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non defective media Fluke does not warrant that software will be error free or operate without interruption Fluke authorized resellers shall extend this warranty on new and unused products to end user customers only but have no authority to ex tend a greater or diffe
7. ENING BATTERY DOOR DO NOT OPERATE WITH BATTERY DOOR OPEN BATTERY PACK NiMH 7 2 V 2 7 Ah REPLACE WITH FLUKE aw SPECIFIED BATTERY A A PACK ONLY Yaw Ni MH emv03 bmp Figure 3 Battery Label A AWarning Connect the supply cable of the device only to sections CAT I Il or Ill of the supply system For details refer to the Identifications section and the voltage to earth should not exceed 300 V 1760 Power Quality Recorder Preparing to Use the Recorder Input Voltage Measuring Inputs The measurement category refer to the Identifications section and the maximum voltage to earth ground from the sensors must conform to the power supply system Refer to Inscription and Technical Specifications section Protection IP40 Preparing to Use the Recorder Before you use the Recorder carefully inspect the packaging and contents to ensure that there is no damage Note Depending on the configuration you ordered flexible current probes and voltage sensors may not be part of the standard equipment An internal transient capture option factory installed only is another configuration that is determined at time of order Kei Mat Tools 800 571 6389 www netzerotools com www netzerotools com SR www netzerotools com Getting Started Manual Before commencing work with the device check the Using the Recorder delivery to ensure that it is complete using the following list and t
8. Power Quality Recorder Using the Recorder Choose a name or accept the default one Press OK Wait while the measurement is initialized Choose a name for the measurement file euro CAUTION All Databases on device with SNo EHKO1 will be deleted 21 bmp Press OK and watch the RECORDING STATUS LED on the instrument It should start flashing slowly indicating the active measurement Close the Settings window P Fluke PQ Analyze gt Net eroTools as 800 577 6389 Measurement euro has been initialized www netzerotools com 22 bmp The measurement campaign is now started 17 www netzerotools com www netzerotools com Getting Started Manual 1760 Displaying Measurement Data Now that the connection has been successfully established and the measurement campaign has been started continue with reading some measurement data The best way for having a quick look at the signals supplied to the Recorder inputs is the Live Mode Select the menu Transfer gt Live Mode and then press Oscilloscope Live Mode Ele PS Timer LE OFF ON Event aj 10 00 sec 24 bmp Tools 800 577 6389 www netzerotools com 18 Select channel 1 and press the Timeplot icon Oscilloscope Channel Select Channel Name Vi VL2 VL3 VN IL1 IL2 IL3 IN VUILZ V L2L3 VL3L1 X XK XX KKK XK XK 25 bmp 55 bmp If everything works correctly you will
9. VE conductors installations such as distribution panels feeders and short branch circuits and Earth ground lighting systems in large buildings Double insulation CAT IV IEC Overvoltage Category IV equipment is designed to protect against transients from WC AC Alternating Current Le DC Direct Current Conforms to requirements of European Union Canadian Standards Association is the K Mat Tools the primary supply level such as an electricity meter or an overhead or underground utility service Be certified body used for testing compliance to safety standards 800 577 6389 www netzerotools com www netzerotools com Tools 800 577 6389 www netzerotools com CAT Identification Figure 1 shows an example to identify the locations of different measurement categories CAT CAT Ill CAT IV emv01 wmf Figure 1 CAT Qualified Personnel Adequate qualifications are the following Trained and authorized to switch on off ground earth and mark the power distribution circuits and devices in accordance with the safety standards of electrical engineering Training or instruction in accordance with the standards of the safety engineering in maintenance and use of appropriate safety equipment Training in first aid www netzerotools com 1760 Power Quality Recorder Safety Information Safe Operation For safe operation of the Recorder Ensure that all persons using the device h
10. ave read and fully understood the operating manual and safety instructions The device may only be used under certain ambient conditions Ensure that actual conditions conform to the admissible conditions outlined in the Technical Data chapter of the Users Manual During the operation ensure that the circulation of air around the instrument is possible in order to prevent the accumulation of heat inside the housing Refer to and comply with instructions in Users Manual chapter Transport and Storage before packing and transporting the Recorder Note Do not use the device for any other purpose than the measuring of voltages and currents that are within the specified ranges and categories including voltage to earth ground Refer to the Users Manual for detailed specifications Improper use Shall void all warranty www netzerotools com www netzerotools com 1760 Getting Started Manual Electrical Connections Ensure that the protective earth connector of the power lead and the housing earth connector are connected according to the instructions to the low resistance unit earth cable Ensure that the power and connecting cables as well as all accessories used in conjunction with the device are in proper working order and clean Install the device in such a way that its power cable is accessible at all times and can easily be disconnected If this is not applicable a two pole circuit breaker with a nominal current must
11. be installed in the power supply lines For connection work do not work on your own but in teams of at least two persons Do not use the device if the housing or an operating CG Mat element is damaged Tools 800 577 6389 www netzerotools com Safety Instructions AA Warning By connecting the Recorder to live circuits the terminals and certain parts inside the device are live Utilization of leads and accessories that do not meet relevant safety standards could lead to serious injury or death from electric shock To avoid electric shock or personal injury The Power Recorder must only be used and handled by qualified personnel Maintenance work must be done only by qualified service personnel First connect the device to protective earth ground and to the power supply by using the mains plug Use only specified voltage and current probes If you use flexible current probes wear Suitable protective gloves or work on de energized conductors Protect the Recorder against wetness and humidity www netzerotools com Tools www netzerotools com 800 577 6389 www netzerotools com Do not hold the Current Clamp anywhere beyond the tactile barrier To prevent electrical shock always connect current probe test leads to the Recorder before connecting to the load To avoid electrical shock do not connect the voltage measuring or power supply input to systems with higher voltages to ground earth t
12. e Buyer will be billed for the repair and return transportation charges FOB Shipping Point THIS WARRANTY IS BUYER S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IM PLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES INCLUDING LOSS OF DATA ARISING FROM ANY CAUSE OR THEORY Since some countries or states do not allow limitation of the term of an implied warranty or exclusion or limitation of incidental or consequen tial damages the limitations and exclusions of this warranty may not apply to every buyer If any provision of this Warranty is held invalid or unenforceable by a court or other decision maker of competent jurisdiction such holding will not affect the validity or enforceability of any other provision gt Net eroTools 11 99 lt a 800 577 6389 www netzerotools com www netzerotools com www netzerotools com J Net7ernTools 800 577 6389 www netzerotools com Table of Contents Title Page OCU MO a cee ace se eect A eee aeeeeceea e ote eee eee secnoeasoeateaues Safety IN eu e EE Safety Instructions cece cceeeceeeeeeeeeeeeeeeceeeeeseeeeeeaeeeeesaeeeeeseaeeeeseeeeseeeeeeseeeeesseeeesaaes Proteccion e Qualified Personne EE Se e Kei et Safety Instructions cece ceececceeeeeeeeeeeeeseeeeeseeeeeeseeeees
13. eaeeeesaeeeeseeeeeseeeeeesaeeeeeaeseesaaes ENEE ee Risks During ODCTAUON sxc ccsescceadciancesgenctexnesctediedeniwesseansecdedardbeeanedicaddedegardeos lt stabeeeseeus Device SMULAOWMN EEN Safety Instructions ON Device HOUSING ccccceseeeeeceeeeeeeeeeeeeaeeeeeseaeeeeseeeeeaeeeeesaees Input Voltage Measuring Inputs cc ceccecceseeeeceeeeeeeeeeseeeeseeeeseeessaeeeseeseeeeeeseeeens Protectio EE j www netzerotools com 760 www netzerotools com Getting Started Manual Preparing to Use the Recorder ccccccccsssccceececeeecensececeuceseueessecessseneueessaeesensensaess Using the Recorder EE PQ Analyze Quick Installation cccccccccecccccceesseseecececeeeseseeeeseeeeessaaeeeeeeeeesssaaaeeees RUNNING e SNE Working with Demo Data E Communicating with the Recorder ccccccccceeeeeeceeeeeeseeeeeeaeeseesaeeeeeseeeeesaeeeeesaaeees Displaying Measurement Uata INES 4c 2 a o E E E E AE E E E E T Net eroTools 800 577 6389 www netzerotools com Il www netzerotools com www netzerotools com eS Net erotools 800 577 6389 www netzerotools com 1760 Power Quality Recorder Introduction Safety Instructions This Getting Started Manual for the Fluke 1760 Power The design and manufacture of the device conform to the Quality Recorder referred to throughout simply as the latest state of technology and the safety standards laid Recorder will allow you to se
14. g the Recorder If you have more than one network interface installed on your computer then select the proper one from the Network dropdown list In the Search Devices dialog press Search ei Search Devices Broadcast Address 192 168 1 255 Intel R PRO1000 MT Network Connection Device Name IP Address 15 www netzerotools com www netzerotools com 1760 Getting Started Manual The list will show only one entry your connected Recorder Press Connect Gei Search Devices Broadcast Address 192 168 1255 Network Intel R PRO 1000 MT Network Connection IP Address 192 168 171 102 Connect Save 18 bmp You are now connected to the Recorder Check the connection status of the Recorder in the bottom right corner of the PQ Analyze window Name Topas2000_Ref FW 20100115 1 3 17 SN EHKO1 IP 192 168 1 102 emv32 bmp 16 The next window is the main settings panel This is the starting point for all Recorder configurations Accept the default values for now and press Initialize Settings euro vdf Ge FLUKE 1760 TOPAS 1000 QWave Premium Hardware Settings Department Nominal Limit values Contact CBEMA Cause of measurement Start Stop Memory Management Recording Modes Trigger Settings ALARM Configuration Auto Manual emv33 bmp 800 577 6389 www netzerotools com www netzerotools com www netzerotools com 1760
15. han is marked on the Recorder To avoid damage to the Recorder never connect the voltage measuring inputs to phase to phase voltages higher than defined on the voltage sensors Prior to connecting the circuits ensure that the maximum measuring voltage and the maximum voltage to earth ground do not exceed the listed voltage level on the voltage sensor and the category of distribution system corresponds with the inscription of the sensor or meets the country specific standards Use only the provided original or specified accessories 1760 Power Quality Recorder Safety Information Use these accessories only in the specified overvoltage category areas Current transformers and or Flexi probes should not be applied or removed from HAZARDOUS LIVE conductors without using high voltage protection gloves The power company side of the revenue power meter is considered a CAT IV area To avoid electrical shock or damage to the equipment never supply the Recorder from the power in this area Use the flexible current probes only at 600 V rms 1000 V rms depending on installation category or dc to ground Use the clamps only on insulated conductors max 600 V rms or dc to ground Additional personal protective measures as required by local government agencies must be taken if the measuring sensors are installed on live conductors Avoid connection from multiple channels to the same phase www netzerotools com www netzer
16. he delivery specifications The Recorder measures variables in power quality the recorded data is analyzed using PQ Analyze software Fluke 1760 Basic models including Basic TR included on the CD ROM This manual will guide you through installing the software connecting a Recorder to a e 1 Power Quality Recorder Instrument network and beginning data analysis e Carrying bag e 1 power cord for mains connection e 1 main connection adapter set e Getting Started Manual N Tools e CD ROM with PQ Analyze application software Te 800 577 6389 manuals data sheets and demo data www netzerotools com e 1 crossover Ethernet cable for direct PC connection grey cable with red RJ45 plugs e 1 Ethernet cable for network connection grey cable e 1 null modem RS232 connection cable red cable Other Fluke 1760 models including INTL US models and TR versions e Voltage sensors and flexible current sensors e GPS time sync receiver 8 www netzerotools com Mat Tools www netzerotools com 1760 Power Quality Recorder 800 571 6389 Using the Recorder www netzerotools com PQ Analyze Quick Installation Select Install PQ Analyze Software from the CD ROM Insert the PQ Analyze CD into your CD ROM drive of your menu and follow the instructions for the installation process Windows PC for system requirements see 1760 Reference Manual If the launch application does not start automatically execute launch exe from the CD
17. otools com 1760 Getting Started Manual Accessories Only use the accessories supplied with the device or specifically available as optional equipment for your model Ensure that any third party accessories used in conjunction with the device conform to IEC 61010 031 2 032 standard and are suitable for respective measuring voltage range Risks During Operation Ensure that the connected devices work properly Measurement sensors must not be connected to unfused circuits Connectors with locking mechanism have to be locked firmly Device Shutdown If you detect any damage to the housing controls power cable connecting leads or connected devices immediately disconnect the measuring inputs of the unit and then from the power supply If you are in doubt as regards the safe operation of the device immediately shutdown the unit and the respective accessories secure them against inadvertent switching on and bring them to an authorized service agent 6 Safety Instructions on Device Housing The mains connection must conform to the ranges values as inscribed on the instrument labels POWER 300 V CAT II 83 264V 45 65Hz C C R 100 375 V d De 35 W NO USER SERVICEABLE PARTS INSIDE Hitt m emv02 wmf Figure 2 Instrument Label Net eroTools 800 577 6389 www netzerotools com www netzerotools com www netzerotools com WARNING TO AVOID ELECTRICAL SHOCK REMOVE TEST LEADS BEFORE OP
18. r is working properly and you should also have the necessary knowledge to explore some of the more sophisticated features You can also e Download measurement data from the Recorder to your PC e Check change the basic instrument settings time and time zone device name e Connect the instrument to a local area network LAN e Explore the various measurement configuration possibilities e Create comprehensive reports There is a lot more to discover in PQ Analyze Please refer to the respective sections in the documentation on the CD ROM www netzerotools com
19. rent warranty on behalf of Fluke Warranty support is available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price Fluke reserves the right to invoice Buyer for importation costs of re pair replacement parts when product purchased in one country is submitted for repair in another country Fluke s warranty obligation is limited at Fluke s option to refund of the purchase price free of charge repair or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period To obtain warranty service contact your nearest Fluke authorized service center to obtain return authorization information then send the product to that service center with a description of the problem with postage and insurance prepaid FOB Destination Fluke assumes no risk for damage in transit Following warranty repair the product will be returned to Buyer transportation prepaid FOB Destination If Fluke determines that failure was caused by neglect misuse contamination alteration accident or abnormal condition of operation or handling including overvoltage failures caused by use outside the product s specified rating or normal wear and tear of mechanical components Fluke will provide an estimate of repair costs and obtain authorization before commencing the work Following repair the product will be returned to the Buyer transportation prepaid and th
20. t up and begin various down in EN IEC 61010 1 2001 2 ed If used power quality measurements The guide is an improperly there is a risk of injury to persons and abbreviated version of the User Manual and other damage of property lals incl he CD ROM shi ith th g deiere included on the C OM shipped with the Protection Class This device is assigned to protection class according to Safety Information IEC 61140 and is equipped with a protective earth e S nnector Please read this section carefully It will familiarize you SCH with important safety instructions for handling your 1760 Power Quality Recorder In this manual a Warning identifies conditions and actions that pose hazard s to the user A Caution identifies conditions and actions that may damage the Recorder www netzerotools com SR www netzerotools com Getting Started Manual Symbols Do not dispose of this product as unsorted Table 1 shows the symbols used on the instrument and or BREET tte recycling information Conforms to relevant Australian Standards Table 1 Symbols CAT Il IEC Overvoltage Category Measurement Symbol Category II equipment is designed to be protected against transients from socket A Hazardous voltage Risk of electric shock outlets and similar points EN Important information See manual CAT Ill IEC Overvoltage Category Il equipment is designed to protect against transients in Do not apply around or remove from ee HAZARDOUS LI
Download Pdf Manuals
Related Search