Home

1. Introduction

Contents

1. Print Server Network Driver Setup Print Server Network driver 3 5 6 Select Propran Holder Setup wil edd progam com to he Folder hited below You map ype a new okie name or One him the eaeting Polder int Oich Next lo continue The system will start to install the utilities automatically z Print Server Network Driver Setup Print Server Network driver 3 5 6 35 Now the installation procedure is completed you are ready to set up the clients computer All network ports of the Printer servers detected on the network will be added to your PC automatically click Continue Note If there are no printer servers detected in the network currently please click Continue to finish the installation Please refer to Section 3 5 1 to add network ports of printer servers manually Print Server Network Driver Setup H driver 3 5 6 The Client Installation procedure is completed Click Finish Priet Server Network Driver Setup Print Server Network driver 3 5 6 Setup Complete After the installation you have completed the following tasks Install all utilities and drivers to the clients PC 36 Add all the printer server s network ports of the network to the client s PC You can then perform the Windows standard Add Printer procedure to add network printers to your PC Please refer to Section 3 6 37 3 5 Client Utilities After Client Installation is
2. information Print Server Setup Wizard P5256002 System Settings eo T Enable Appletalk Printing Enable Rendezvous Printing V Enable LPR Printing Enable MetyVare Binary Printing V Enable TCP RAV Printing ih Enable IPP Printing Enable SMB V Enable SNMP Enable NetBEUI Back Cancel 95 Step 3 Setup the IP of this printer server and the DHCP server Please refer to section 7 9 for detail information Print Server Setup Wizard P5256002 TCP IP Settings rn F DHCP Server C AdoP Static P IP Address 192 168 2 2 Subnet Mask 255 255 255 0 Gateway 192 168 2 254 Back Cancel Step 4 Select the Wireless Adapter mode and complete wireless LAN settings The other procedures are the same with Wireless Setting in Setup screen Please refer to section 7 10 for detail information Print Server Setup Wizard P5256002 Set Your Wireless Adapter Mode If you wish to use Wireless to connect to your Wireless Access Point please select this mode f Adhoc Mode If you wish to connect head to head with another Wireless client please choose this mode Back Cancel Mest 96 Setup the AppleTalk printing Please refer to section 7 5 for detail information Print Server Setup Wizard PS256000 AppleTalk Settings fone Mame i Frinter Type Port 1 Laseriititer Port 2 Laservyriter Port 3 Laservyriter Print Server Setup
3. 6 3 2 BOOTP If you have the BOOTP daemon bootpd running on your UNIX system that is accessible by the printer server you can use the BOOTP protocol to set up the IP address of the printer server We recommend that the BOOTP server should be located on the same subnet as the printer server If you use Network Information Services NIS in your system you may need to rebuild the NIS map with the BOOTP services before doing the following BOOTP configuration To rebuild the NIS map please refer to your system documentation To configure the IP address data for the BOOTP server you will need to log in the host of BOOTP server as the superuser root Perform the following steps to add address entries 1 Optionally assign a name corresponding to the printer server s IP address You can add this address to the etc hosts file by adding a line such as 203 66 191 12 pserver 2 Add an entry to the host s etc bootptab file similar to the following hostname sht 1 63 ha print_server_ethernet_address ip print_server_ip address Lines should be indented with tabs Where hostname is the device name of a printer server the ht 1 tag specifies the hardware type is Ethernet the ha tag specifies the Ethernet address of a printer server which is the Node ID located on the printer server The ha tag must be preceded by the ht tag The ip tag should correspond to the IP address you want to assign to the printer server 6
4. Change Windows Firewall settings See Also J Network Troubleshooter Other Places G Control Panel My Network Places E My Documents ig My Computer Details Network Connections System Folder 130 Step3 Select Advanced tab and click Settings Local Area Connection Properties General Authentication Advanced Y Windows Firewall Protect my computer and network by limiting or preventing access to this computer from the Interet If you re not sure how to set these properties use the Hetwork Setup Wizard instead 131 Step4 Select Exceptions tab and click Add Program x Windows Firewall Gene gl Fen A dvanced Windows Firewall i blocking incoming network connections except for the programs and services selected below Adding exceptions allows some programs to work better Gut might increase your security risk Programs and Services Name O File and Printer Sharing Remote Assistance LJ Remote Desktop LI UPnP Framework Display a notitication when Windows Firewall blacks a program what are the nske of allowing exceptions Step5 Click Browse to add a new program Add a Program To allow communicatione with a program Gy adding it to the Exceptions list select the program or click Browse to search for one that i not listed Programs tAdmin Utility Camera viewer BA CCS E Configuration FreeLell IP Hearts
5. and Gateway for the printer server You can enable disable or set auto for the printer server s DHCP server The DHCP server is disabled by default If the DHCP Server is enabled or set Auto you have to assign a range of IP addresses here Fill in the Start IP Range DNS Subnet Mask and Gateway and the printer server will assign a unique IP for each client Note that when Auto is selected the DHCP Server of the printer server will be enabled only when there is no other DHCP Server within the network 116 8 4 4 SMB Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ay Q Back P x a A pe Search e Favorites ge 2 gt 33 Address http 192 168 2 2 vE co Links This page allows you to configure SMB settings for the Print Server Click Save and Next to continue SMB Configure SYSTEM SMB Enable v Wireless SMB Group Name WORKGRO General Salting Pass Job When Error Occured Disable v Encryption SNMP NetWare AppleTalk Save Settings Done Internet You can enable disable the SMB protocol from here If SMB is enabled enter the SMB Group Name to specify the SMB group that this printer server belongs to All PC should join the same group before they can use this printer server by SMB protocol Pass Job when Error Occurred When the printer is interrupted because of paper out
6. D o on LevelOne WPS 9121 WPS 9122 11g Wireless Mini Printer Server w Parallel USB2 0 Port User Manual V1 0 0 0601 Contents Te INTRODUC TION nissesscenscacicoecatintenccsnasesvioniwadintenccsansaevcceneaeneancads 1 1 Product Introduction ccsseseeeeeeeeees T WZ Product PACK AGC iiss insnewiwndorsereanesreiueneveenatiers 8 1 3 Network Printing Architecture 9 1 3 1 Printer Server Network FUNCTIONS a e 9 1 3 2 Network Printing Functions for Clients 11 1 3 3 Network Printing Functions for Network Server 13 1 4 Network Printing Environment 14 1 5 Contents of the User Manual 16 1 6 Printing FUNCTION ccccseeseeeeeeeeeeeeees 17 2 HARDWARE INSTALLATION 0 cece eeeeeeeeeeeeeeeeeeeenees 18 3 WINDOWS PEER TO PEER NETWORK 000008 21 3 1 System Architecture cee 22 3 2 Administrator Installation and Setup 23 3 3 Administrator Utilities 0 0 0 32 3 4 Client Installation and Setup 33 3 5 Client Utilities saccictenccivnsctveniwnsnticeevesseenes 38 3 5 1 Network Ports Quick Setup ssosessesenenerernennrennns 38 3 5 2 Remote Ports Utility 0 0 0 eec cece eeeeeeee ees 41 3 6 Windows Add Printer Procedure 43 4 WINDOWS 2000 NETWORK ccccccceeeeeeeeeeeeeeeeeeeeeees 47 4 1 System Architecture ccccceeee
7. Share the above server s printer to the network by performing the standard Windows printer sharing process 49 4 3 User Installation and Setup Winder 2000 After server side s installation is completed client side will be able to find the server s shared printer in Network Neighborhood You only need to perform Window s standard Add New Printer procedure select Network Printer shown in the screen below and complete the configurations afterwards to access the shared printer 1 Open Start Settings Printers and Faxes and click Add a Printer then the following screen IS popped up Add Printer Wizard Welcome to the Add Printer Wizard This wizard helps you installa printer or make printer connections lfvou have a Plug and Play printer that connects 1 through a USB port or any other hot pluggable port such as IEEE 1394 infrared and so on you do not need to use this wizard Click Cancel to close the wizard and then plug the printer s cable Into your Computer or point the printer toward your computer s infrared port and turn the printer on Windows will automatically install the printer for you To continue click Next Cancel 50 2 Select A network printer or a printer attached to another computer and click Next Add Printer Wizard Local or Network Printer The wizard needs to know which type of printer to set up z Automatically detect and me
8. icon and the AppleTalk configuration window will pop up AppleTalk is a data communication protocol often used by Macintoshes The printer server can use these parameters to join the Apple Talk network and share the printer to other Apple Talk workstations You have to setup the Zone Name and Printer Type for each printer port of this printer server Zone Name Printer server has to join zones of AppleTalk before it can be shared to other workstations Only workstations in the same zone can share the printer If you want to share the printer to all workstations in all Zones you should enter only in the Zone Name field Printer Type the type of printer attached to each printer port You can get the printer type from the manufacturer of the printer Please refer to printer s user manual for printer type if default LaserWriter does not work 74 How to install the printer server in the MAC OS 1 In the Desktop click System Preferences 2 Click Print amp Fax an System Preferences Personal r rit if Desktop amp Dock Expos International Security Screen Saver Hardware E FY amp A s Ls CDs amp DVDs Displays Energy Keyboard amp Sound Saver Mouse Internet amp Network Mac Network OuickTime Sharing System i j oh r af zn O B Accounts Classic Date amp Time Software Speech Startup Disk Universal Update Access 3 From the Print amp Fax
9. screen click Set Up Printers r r 3 8ao Print amp Fax Cc Set Up Printers es s Selected printer in Print Dialog Last printer used Ka Default paper size in Page Setup U5 Letter H4 Share my printers with other computers iq pl Click the lock to prevent further changes 75 4 Click Add to add the new printer server through TCP IP OOO Print amp Fax Printing Faxing Printer List Utitity Colorsync Show Into f wW Click the lock to prevent further changes PSO00888_Iptl EPSON Stylus Color ge PS123487_Iptl EPSON Stylus Color 76 5 Enter the Printer Type Printer Address and Queue Name then select the Printer Model to setup the printer server Printer Type LPD LPR Printer Address Input the IP Address of the printer server Queue Name The queue name of the printer server is Ipt1 Printer Model Select the Printer Model that is attached to the printer server E Printer Setup Utilit Edit View Printers Window Hel OAA Printer List c 4 IP Printing a ae Verde Ale in Men Printer Type LPD LPR Ho Printer Address 192 168 1 227 Complete and valid address 4 lt Queue Name lpt Leave blank for default queue Printer Model EPSON fi na ee EPSON Stylus C61 CUPS Gimp Print v4 2 5 EPSON Stylus C62 CUPS Gimp Print v4 2 5 EPSON Stylus C70 CUPS Gimp Print v4 2 5 x E EPSON Stylus C80 CUPS Gimp
10. Internet You can enable disable the printing protocols from the screen To enable the function please select Enable to disable the function please select Disable 8 4 2 Wireless If you want to use the printer server through wireless LAN please set up the printer server through Ethernet first and make sure your wireless LAN setting is correct After setting the wireless LAN unplug the Ethernet cable and restart the printer server then you can start to use the printer server through wireless LAN If the wireless configuration does not work please plug the Ethernet cable again restart the printer server and configure the printer server through Ethernet until the wireless LAN settings are correct 111 8 4 2 1 General Setting Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ay I gt ai B 3 2 Q Back P x a A A Search 5 Favorites 2 7 S E 3 Address http 192 168 2 2 Go Links This page allows you to define your ESSID Wireless Mode and Channel Number Note all wireless devices on your wireless network must have the same ESSID to communicate with one another Click Save and Next to continue Wireless Setting Function Auto v Mode Adhoc Encryption ESSID default Site Survey Channel Number 11 TCP IP SMB SNMP NetWare AppleTalk Save Settings Done Internet You can enable disabl
11. You can click the Save Settings to save the settings and restart the system 121 8 5 System Tools 8 5 1 Load Default Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ay A Pe a A Q Back gt x a A A Search Favorites 2 va Ne 3 Address http 192 168 2 2 v J Go Links This menu allows you to restore the factory default settings Upgrade from Load Factory Defaults Browser Are you sure you want to load factory defaults Done Internet You can use this page to restore the factory default settings All of your previous setup will be cleared 122 8 5 2 Upgrade Firmware from Browser Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ay Q Bak gt x a A s Search e Favorites fA B te 33 Address http 192 168 2 2 vE co Links This Menu allows you to upgrade the firmware of the Print Server Note please make sure the firmware is correct before you proceed If you do not know which firmware file you should use please contact your local dealer for technical support Load Default Firmware Upgrade Select a File Done Internet You can upgrade new firmware for this printer server in this page Click Browse to select the new firmware in your storage and then click OK the firmware will be updated in several minutes Be aware that if you have started upgr
12. is recommended that you power on the printer server before the printer Wireless Printer Server Color Situs Description The LAN cable is connected to the Printer Server No network connection er Network traffic transferring or receiving through inking the LAN port Firmware is being upgraded to the Printer Server If the Printer Server is upgraded failed the LED will be lighted steadily Paper jam or paper out while printing No printing jobs The Printer Server is sending printing jobs to Blinking printer The Printer Server is connected to a wireless AP WLAN Green or station successfully ae The wireless mode of the Printer Server is disabled The Printer Sever is trying to connect to the AP Blinking or station Reset Press the reset button with a pencil tip for less than 2 seconds When the Printer Server is rebooting the Status WLAN will be ON and then OFF for two times When the Status is OFF the Print Server is ready to use Reset to Factory Default Press the reset button with a pencil tip for longer than 5 seconds When the Printer Server is reset to default the Status WLAN will be OFF in the beginning and then ON and OFF for two times After rebooting the Printer Server is reset to factory default settings 20 3 Windows Peer to Peer Network Z 3 1 System Architecture Printer server supports Windows Peer to Peer network printing mode which is suitable for most medium and sm
13. My Documents A My Pictures My Computer Details gt gt gt gt LOS EPSON AL 2600 Advanced on FANNY ancel 101 x 54 5 Netware Network 55 5 1 System Architecture We implemented NetWare printer sharing functionality into the printer server itself thus allowing one or more printers attached by a printer server to be connected to the network We have developed the printer server to support NetWare printer server Embedded printer server which emulates the queue management functionality of NetWare printer server PSERVER program running on the NetWare server A user first prints a job ata workstation the job is routed to a NetWare server the NetWare server stores the job in a print queue and then the printer server gets the print job from the queue to printers T Print Server Windows 2000 Compare with NetWare printing functionality the advantages of embedding the NetWare network printing functionality in the printer server include Installation is easier and quicker Network management is easier Printing performance is enhanced Relieve NetWare file server s burden Relieve the need of a workstation running the remote printer utility Improve productivity by locating the printer near the workgroup Each printer server should log into a NetWare server before servicing the print jobs Each printer server will occup
14. Print v4 2 5 Cancel 6 The printer server is installed completely You can see it in the printer list 71 Printer Setup Utility Edit View Printers Window Help 4 Wed 11 42 PM 2 Printer List A a 0 X 0 Make Default Add Delete Utility Colo c Show Info LPT1 on 192 168 1 227 EPSON Stylus C61 CUPS Gimp Print v4 2 v i PSOOO8S8_ipt 40 CUPS Gimp Print v4 2 5 v ie PS123487_lpt1 EPSON Stylus Color 740 CUPS Gimp Print v4 2 5 7 You can print a file to check whether the printer server is installed successfully 000o LPT1 on 192 168 1 227 A or ay Delete Hold Resume Stop Je Stop Jobs SuperMario jpg Spooling LPR job 55 complete Name Drie tore Printing SuperMario jpg 78 7 6 General Configuration General P5256007 wseneral Settings Device Info MAC ID 00 00 64 03 1 7 27 Type Pep Version 3 1234 Port Ma 1 Server Mame Set User NamesPassveord a User Mame Password Retype Fassword Save Cancel Double Click General icon and the General configuration window will pop up You can see basic printer server information in this page You also can configure the Printer server Name User Name and Password here Printer Server Name the name of the printer server You can use this name to identify the printer server when you are searching for the printer server
15. e Favorites A Media E2 B vy Address http 192 168 2 2 v EE co Links This page displays the current NetWare settings of the print server General Settings SYSTEM Polling Time 3 seconds NetWare Bindery Settings Use Bindery Mode Enable TCP IP Name of the File Server NetWare Port Settings Port Attachd Queue Disconnected Printer Ul SMB SNMP AppleTalk Ki ti Done Internet A v 33 kt 33 ll This page lists NetWare settings including Polling Time Use Bindery Mode Name of the File Server and Port Attached Queue 108 8 3 7 AppleTalk Print Server Microsoft Internet Explorer File Edit View Favorites Tools Help ae Back ad x a A 2 Search e Favorites A Media E2 B vy Address http 192 168 2 2 v EE co Links This page displays the current AppleTalk settings of the print server AppleTalk Settings SYSTEM AppleTalk Zone Name Printer i SSS Es Printer Type LaserVVriter Lill TCP IP SMB SNMP NetWare lt m gt Done Internet This page lists Apple Talk settings including AppleTalk Zone Name and Printer Type of printers connected to all print ports 109 8 4 Setup Wizard 8 4 1 System Print Server Microsoft Internet Explorer fe lx File Edit view Favorites Tools Help ay Q Back 7 2 x a A Search E Favorites 2 ra e
16. example 0123456aef or Guest If the key length is 128 bit enter 26 digit Hex values or 13 digit ASCII values as the encryption keys For example 01234567890123456 789abcdef or administrator 89 WPA shared key Security Mode Wireless P5256002 Wireless Security WEP Security Mode APA shared key ka lf you wish to activate YYWEP Wireless Security or your wireless network is already running wireless security you may configure your settings WPA Algorithme TKIP here MoteJAll Wireless Devices on your network must use the te same WEF key to function Shared Key correctly Back Mest gt When WPA shared key also named WPA PSK requires users to select the advanced encryption methods i e TKIP and enter a set of shared key TKIP TKIP Temporal Key Integrity Protocol changes the temporal key every 10 000 packets This insures much greater security than the standard WEP security Shared Key Enter 8 to 63 digits of ASCII format to be the key for the authentication within the network When you finish configuring the wireless security click Next to go to next step Wireless P5256002 Configure Your Adapters IP Address Automatically Obtain IP Settins DHCP Obtain your IP Settings from your Wireless Access Point Router DHCP must be enabled on your Wireless Access Point Router f Set Your IP Manually IP Address h g2 h BS 2 2 su
17. or off line while printing user can set the interval time to bypass the current printing job Or the printing document will not be printed completely or with unformatted messages 117 8 4 5 SNMP Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ay Q Back P x a A pe Search e Favorites ge 2 gt 33 Address http 192 168 2 2 vE co Links TThis page allows you to configure SNMP settings for the Print Server Click Save and Next to continue SNMP Configure SNMP System Contact Wireless SNMP System Location SYSTEM General Setting Encryption NetWare AppleTalk Save Settings Done Internet The printer server supports SNMP configuration If it is enabled please set up the following parameters SNMP System Contact You can enter the printer server administrator s contact information here This information will be displayed in the SNMP management tool SNMP System Location You can enter the installed location of the printer server here This information will be displayed in the SNMP management tool 118 8 4 6 NetWare Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ay Q sack QJ x a A P Search e Favorites ge B 33 Address http 192 168 2 2 vE co Links This Menu allows you to configure the NetWare function of the Print Server Click Save and Next to
18. servers on the same network it cannot search and configure printer servers on other subnets across network segments You must use Remote Ports Utility described in the next section to manage remote across network segments printer servers 40 3 5 2 Remote Ports Utility Remote Ports Utility offers a convenient way for you to manage and add printer port of the remote printer server From the assistant of this utility you can print to other printer servers outside the subnet across network segment However please note that this function only supports TCP IP network protocol Please follow the procedures described below Step1 Run Remote Ports Utility Clicks Add to add a remote print port Remote port setup 3 0 Remote port list Delete Step2 Enter printer server s name IP address select used ports and enter LPR queue name of each port click Ok Create remote port Print Server Mame pO IP Address pO Cancel Fort Pl 7 Pe PS Step3 The new remote print port is displayed as follows Remote port setup 3 0 Remote port list Sales P1 P1 Delete E wit 41 In order to use the remote printing function you will have to proceed with normal Add Printer procedure and select your printer port as the newly added remote printer port HP LaserJet Properties Sharing Ports Advanced Device Settings 129 A HP Laszernlet Print to the following portis D
19. 02 1 9022 CD CONTENTS WPS 9121 9122Z2 HTTP WWW LEVEL 1 COM Corprmian D2005 OIGITAL DATA COMMUNICATION S Inc ALL RIGHTS Reseevec Click Client Utility GV WwWwWPS 9O9121 9122 1 1G WIRELESS MINI PRINTER SERVER ADMINISTRATOR UTILITY PREVIOUS PAGE CueENT UTILITY HITP www LEVEL 1 cCOM COPYRIGHY Q200s DIGITAL DATA COMMUN ICATICNS Inc ALL RIGHTS RESERVED 33 The Utilities Setup window will be displayed Click Next Pring Server Hawari Driver Sotup Print Server Network driver 3 5 6 Welcome b the Print Server Network driver 3 5 6 Se1up pogram Wek The enti wi 1 Copy all meceasany divers bo 2 by ok rch poe Sane rs ere kabel me Gch Cacia tee Programs rhea EPEE WAAI Tiis oropan ii byy cpg l poon of ani i REE sts tal be pioescrsed ey hes roca poche patel cared Laa Click Next to install the utilities in the default folder or click Browse to specify the destination folder where you would like to install the utilities Print Server Network Driver Setup Print Server Network driver 3 5 6 Choose Destination Location Setup val mated PrntServer Netwosk driver to the tolosang folder To inata to ther bolder cick New chem che el ces are a E rac You can choos net to instal PietServer Network diwes by selecting Cancel bo ent the entalohon progam 34 Specify the program folder where the program icons will be added to click Next
20. 03 66 191 186 pserver 2 Create a spool directory for the printer in the same directory where spool directories are normally kept on the machine such as var spool or var spool Ipd mkdir var spool lpd pserverd chown daemon var spool lpd pserverd chgrp daemon var spool lpd pserverd chmod 775 var spool lpd pserverd 3 Add an entry to the host s etc printcap file similar to the following printer name lp rm 203 66 191 186 rp lpt1 If var spool lpd pserverd log sd var spool lpd pserverd mx 0 Lines should be indented with tabs More than one printer name can be used with variants separated by vertical bars name1 name2 The rm entry should correspond to the IP address you have assigned to the printer server You can also use a host name if you have assigned one in the etc hosts file The sd entry should correspond to the spool directory you created in the previous step The rp entry should correspond to the port name of the remote printer The values should be one of Ipt1 Ipt2 or lpt3 depends on the printer port 67 The printer server should now be available for printing from your Unix host 68 7 Administrator Configuration Utility 69 7 1 Introduction This chapter introduces printer server s system configuration utility in Windows environment This utility is automatically installed during Windows Administrator Utility installation procedure refer to section 3 2 and 3 3 This utility
21. 4 For example a printer server with the following configuration Node ID 0000B4010101 this implies Ethernet address is 0000B40101071 IP address 203 66 191 12 The entry for this printer server in the etc bootptab file should be PS010101 sht 1 ha 0000B4010101 ip 203 66 191 12 65 6 4 Verify Printer server s IP Address To verify that your printer server is responding to the newly assigned IP address using a PING command ping ip address 66 6 5 Configure Remote LPD Printing on the Host The procedure you use to configure your Unix host s to allow printing to your network remote printer server varies between different varieties of Unix The procedure below can be used for Unix variants that are related to BSD Unix such as SunOS or Linux For other versions of Unix consult your system documentation keeping in mind that 1 The printer server should be treated as a BSD networked printer server host 2 The host name should be the name or IP address that you have assigned to the printer server 3 The printer name or queue name on the remote host should be Ipt1 Ipt2 or lpt3 the name of the printer port on the printer server You will need to perform the tasks below logged in as the superuser root To configure your Unix host for printing 1 Optionally assign a name corresponding to the printer server s IP address You can add this address to the etc hosts file by adding a line such as 2
22. IP to manually assign IP Address Subnet Mask and Gateway for the printer server Click the DHCP Server button to enter the DHCP server s setting page You can Enable Disable the DHCP server or set Auto and assign a range of IP addresses here The DHCP server is disabled by default If Auto is selected the DHCP Server of printer server will 83 be enabled only when there is no other DHCP Server within the network When Enable or Auto is selected you have to configure Starting Address Range Subnet Mask Gateway Address and DNS The printer server will assign a unique IP for each client 84 7 10 Wireless Configuration If you want to use the printer server through wireless LAN please set up the printer server through Ethernet first and make sure your wireless LAN setting is correct After setting the wireless LAN unplug the Ethernet cable and restart the printer server then you can start to use the printer server through wireless LAN If the wireless configuration does not work please plug the Ethernet cable again restart the printer server and configure the printer server through Ethernet until the wireless LAN settings are correct The default settings of the printer server wireless function are as follows Mode Ad Hoc SSID Default Channel 11 Wireless PS2756007 set Your Wireless Adapter Mode f Infrastructure Mode lf you wish to use Wire
23. Macintoshes The printer server can use these parameters to join the AppleTalk network and share the printer to other AppleTalk workstations You have to select to enable or disable AppleTalk and setup the Zone Name and Printer Type for each printer port of this printer server AppleTalk Enable Enable or disable AppleTalk AppleTalk Zone Name Printer server has to join zones of AppleTalk before it can be shared to other workstations Only workstations in the same zone can share the printer If you want to kI share the printer to all workstations in all Zones you should enter only in the Zone Name field Printer Type the type of printer attached to each printer port You can get the printer type from the manufacturer of the printer 120 8 4 8 Save Settings Print Server Microsoft Internet Explorer Q sax amp x a A PP Search P Favorites amp B ee 38 Address http 192 168 2 2 v E co ink This page allows you to configure AppleTalk settings for the Print Server Leave the settings boxes blank and Click Save amp Next if you don t use the AppleTalk protocol Apple Talk Settings AppleTalk Enable Enable v AppleTalk Zone Name SYSTEM Wireless General Setting Printer1 Microsoft Internet Explorer Encryption YD Would you like to save settings and reboot Site Survey TCP IP SMB SNMP NetWare Save Settings Ea Internet
24. Wizard P S2560007 NetWare Settings Polling Time f Sec File Server to be serviced NetiVWare Server Back Cancel 97 Step 5 Click Save to finish setting and reboot computer for effect to take place Print Server Setup Wizard P5256002 Setup Status Summary Server Mame P2256002 Print Protocol AppleTalk Printing Disable Rendezvous Printing Mot Support LPR Print Enable NetWare Binary Printing Disable Raw Print Enable IPP Print Enable SMB Disable SNMP Enable MetBEUI Disable IF Settings Back Cancel 98 7 14 Report El Report MAC ID Model Type PS256002 O0 00 64 03 1 27 1Pfeo Click Report icon on the tool bar the Report window will pop up The report lists basic information of all available printer servers on the network The information includes Device Name MAC ID Model Type Firmware Version and Status of printer server 99 8 Web Management 100 8 1 Introduction Printer server can be configured and managed on the Web Through Local Area Network or even Internet administrator can easily configure and manage printer server s various main functions in browsers Simply enter printer server s IP address into your browser s address field to manage a printer server by printer server s built in Web Server The default IP Address User Name and Password settings of the Printer server are as follows IP Address 192 168 2 2 User N
25. ading firmware you have to follow all the upgrading steps or the printer server can t turn back to normal configuration 123 9 IPP Printing 124 9 1 Introduction IPP Internet Printing Protocol Printing provides a convenient way of remote printing service by TCP IP The printer server can support IPP printing by default It is needless to do any setting Any PC that can support IPP printing for example Windows 2000 XP can directly use the printer server by IP By using the IPP printing you can share the printer to all the PC s that can access the printer server by IP You can even share your printer to Internet users Note IPP does not support Windows 98SE ME Linux and MAC OS 125 9 2 System Setup 9 2 1 Printer server Side It is needless to do any setting on the printer server side Make sure the printer server has correct IP settings If you want to share the printers to Internet users you have to set a real IP to the printer server You also have to make sure that any gateway router or firewall does not block IPP protocol if you have these gateway devices installed in your network 9 2 2 Client Side You only need to perform Window s standard Add New Printer procedure Step1 Click Start choose Settings and select Printers and Faxes Step2 Click Add a Printer Step3 The Add Printer Wizard is displayed Click Next Add Printer Wizard Welcome to the Add Printer Q Wizar
26. all network environments Through quick and simple installation procedure users can immediately enjoy the convenience of network printing fel Windows HT Server FT PP CRIP a ee ee ee ssid PTPP ane PTPP an m A _ E Fon FUE Windows HT Windows 2000 Vindos 98 Workstation Installation procedure is separated into following two parts 1 Administrator Installation and Setup refer to section 2 for more detailed information System administrators must Install administrator s utilities into his her computer Configure printer server from administrator s configuration utility 2 Client Installation and Configuration refer to section 3 for more detailed information Client users must install Windows PTPP driver Peer to Peer Printing for network printing In addition after PTPP is installed the system will automatically search for all printer servers on the network and add the printing port of the printer servers into Windows printing port refer to Network Printing Architecture in section 1 4 for more detailed information 22 3 2 Administrator Installation and Setup The Administrator Installation can be performed on Windows 98SE ME 2000 XP with the same user interface Before the installation please verify that your network protocol is installed on your PC TCP IP IPX and or NetBEUI It will be helpful in your installation process Insert the CD shipped along with the printer server into y
27. ame Admin Password 1234 101 8 2 Login You may use any Web Browser to review the status or configure the settings of the printer server After entering the IP address of the printer server a login page display You have to enter correct User Name and Password before going to the Web Management pages Notes Default User Name is admin default password is 1234 Connect to 192 168 2 2 Default password 1234 User name f admin ye Remember my password Kk 102 8 3 Device Status 8 3 1 System Print Server Microsoft Internet Explorer File Edit Yiew Favorites Tools Help ae Q sack QJ x a A P Search 5 Favorites 4 B te A 3 Eao Links This page displays the current system settings of the print server System Information Device Name PSO00042E Raw Printing Enable Se Printer Server Name PESEK TIS IPP Printing Enable Model Type 1UVY Print Server LPR Printing Enable _ TCP IP Firmware Version 2 6 22 AppleTalk Printing Enable MAC Address 00 00 B4 00 04 2E NetWare Printing Enable SMB USB Port Number 1 SMB Enable SNMP LPT Port Number No SNMP Enable Wireless Lan Status Auto NetBEUI Enable NetWare Wireless Configruation Mode Adhoc ESSID 00 00 C Channel Number 0 WEP Disable Status Disconnected BSSID AppleTalk lt Lilt a Done Internet 33 ll 33 ll 33 ll System Information includes Device Na
28. and contact your network administrator or original equipment manufacturer For the correct printer driver i i 4 Cancel T The server for the EPSON AL 2600 Advanced printer does not have the correct printer driver installed IF you want 52 7 Insert the CD attached with the network printer and designate the file path to the CD Click Ok to start the installation File needed Printer driver INF for EPSON AL 2600 Advanced 3 TI EEs S Da tela oe e i JESDrivers Driver 8 Select to let the network printer be your default printer or not Click Next to continue Add Printer Wizard Default Printer Your computer will always send documents to the default printer unless you specify otherwise 53 9 The network printer is installed completely Click Finish Add Printer Wizard Completing the Add Printer Wizard Tou have successtully completed the Add Printer Wizard You specitied the following printer settings Hame EPSON AL 2600 Advanced on FANNY Default Yez Location Comment To close this wizard click Finish R Printers and Faxes File Edit wiew Favorites Tools Help Q Bach i Bi Fo Search l gt Folders HAL Address Printers and Faxes Printer Tasks E Add a printer amp Set up faxing See Also 2 Troubleshoot printing Get help with printing Other Places O Control Panel 5 Scanners and Cameras
29. ase scan and select the name of your Wireless Netyyork from the list above lf you do not see your Wireless Network please check to See if your Wireless Netyyork if setup correctly and re scan lt Back Mest gt 86 The list is the scanned available access points Select an access point in the list and click Next If you cannot find the access point that you want to use click Scan to let the printer server scan again Ad Hoc Mode Wireless P5256002 Connect to your wireless Network EC Scan For Your local Wireless Network Let the Vizard automatically scan for your Wireless Netvrork SSiD f Assign Your Wireless Netyvork Manually defaut Enter your own Wireless Metyyork ID SSID Manually Channel Selection 7 Auto i Manual 11 Back Mest gt In the Ad Hoc mode you can let the printer server automatically associate with other wireless station or manually assign the SSID of your wireless network You can let the printer server automatically select the channel that is the same with the peer or manually assign a channel If you select to let the printer server scan for an active wireless station the following window will pop up Wireless P5256002 Wireless Network Name SSID 00 0E 2E 44 23 40 Please scan and select the name of your Wireless Netyyork from the list above lf you do not see your Wireless Network please check to see if your Wireless Netyyork if setup correctl
30. bnet Mask 255 255 255 D Gateway h g2 4 BS 2 254 lt Back Mext gt Cancel You can select to let the printer server automatically obtain IP settings with DHCP client or manually assign the IP settings If you manually assign the IP settings you have to enter IP address subnet mask and default gateway address 90 When you finish configuring the IP settings click Next to confirm the IP Address configuration Wireless P5256002 Setup Status Summary Server Mame PS2S6002 Connect Mode Infrastructure Mode Wireless Netvrork MamelssiD frank IP Settings IP Address 192 165 2 2 Subnet Mask 255 255 255 0 Gateway 192 166 2254 Wireless Security Disable Click Save to save the wireless configuration 9 7 11 SNMP Configuration SNMP PS256002 Contact Location Save Cancel Double Click SNMP icon and the SNMP configuration window will pop up Contact You can enter the printer server administrator s contact information here This information will be displayed in the SNMP management tool Location You can enter the installed location of the printer server here This information will be displayed in the SNMP management tool 92 7 12 SMB Configuration SMB P5256002 SME Group Mame WORKGROUP Paste Job When Error Qccured SMB Group Name the name of SMB group that this printer server belongs to All PC shoul
31. by the administration and client utilities User Name Password is used to authenticate the administrator by the Web administration tool 79 7 7 Netware Printer server Configuration NetWare P5256002 NetWare Settings Poling Time E 4 Sec File Server to be serviced NetWare Server Save Cancel Double Click NetWare icon and the NetWare configuration window will pop up This printer server supports NetWare Bindery Printing method The printer server periodically polls the NetWare server printer queues for printing jobs You have to assign the NetWare server name printer server polling interval and the name of queue on the NetWare server for each printer port Polling Time is the polling interval of the printer server for waiting printing jobs on the NetWare server the range of polling time is from 3 29 seconds NetWare Server is the name of the NetWare file server that provides printer queues 80 7 8 System Configuration System P5256002 System Settings Enable Appletalk Printing Enable Rendezvous Printing i Enable LPR Printing Enable NetvVare Binary Printing V Enable TCP RAW Printing V Enable IPP Printing Enable SME i Enable SNMP Enable MetBEUI Update E Upgrade Load Default Wireless Function ff Auto f Enable C Disable Domain Country FCC 1 113 Double Click System icon and the System configuration window will pop up In the System c
32. ck Next Add Printer Wizard Specify a Printer IF pou don t know the name or address of the printer you can search for a printer that meets your needs What printer do you want to connect to O Browse for a printer Connect to this printer orto browse for a printer select this option and click Mest Name Connect to a printer on the Internet or on a home or office network URL http 4 192 168 3 66 631 Ipt ample Http server printers myprinten poabe Ce Gr w 127 Step6 Selecta suitable printer manufacturer and the printer model and click Next If your printer is not in the list click Have Disk to install the driver of the printer After installation the printer model will be added to the list Add Printer Wizard Install Printer Software The manufacturer and model determine which printer software to use LA Select the manufacturer and model of Your printer IF your printer came with an installation disk click Have Disk IF your printer i not listed consult your printer documentation for compatible printer software Manufacturer Printers Generic Gestetner IEM infotec EF This driver is digitally signed Tell me why driver signing i important C ter Ree Step7 Choose to set the print whether as a default printer or not Click Next Add Printer Wizard Default Printer our computer will always send documents to t
33. completed there will be three tools in printer server s Program folder Network Ports Quick Setup Remote Ports Uninstall Network Driver The Uninstall Network Driver will assist you in removing all installed client software The other two tools are described as follows amp Print Server Utilities TAR Fie Edit Yiew Favorites Tools Help B gt pa Search Ke Folders ies Address an C Documents and Settings All Users Start Menu Programs Print Server Utilities Network Ports Quick Setup Remote ports File and Folder Tasks DSSS Shortcut Shortcut P 1 KB 1 KB CJ Make a new folder a Publish this folder to the Uninstall Network driver Web Shortcut fa Share this folder tJ Bae Other Places ff Programs E3 My Documents Shared Documents ig My Computer My Network Places Details 3 5 1 Network Ports Quick Setup Network Ports Quick Setup Utility offers a very simple method to add or remove printer server s printer port from the client s computer During the client s installation procedure the system will automatically search for all printer servers on the network and add them into the printer ports of the client s computer see below Note When you have followed the steps in Section 3 6 to add a new printer You can right click the printer from Printer and Faxes in the Windows and select Properties to see the figure in the left side Select Ports to check which net
34. continue General Settings SYSTEM Polling Time seconds min 3 max 29 seconds NetWare Bindery Settings General Setting Name of the File Server Wireless Encryption AppleTalk Save Settings Done Internet This printer server supports NetWare Bindery Printing method The printer server periodically polls the NetWare server printer queues for printing jobs You have to assign the NetWare server name printer server polling interval and the name of queue on the NetWare server for each printer port Polling Time is the polling interval of the printer server for waiting printing jobs on the NetWare server Name of the File Server is the name of the NetWare file server that provides printer queues 119 8 4 7 AppleTalk Print Server Microsoft Internet Explorer Aaz Fie Edit view Favorites Tools Help ay y A r gt VA Q Q Back gt x a TD p Search se Favorites 4 CS amp E 33 Address http 192 168 2 2 vE co Links This page allows you to configure AppleTalk settings for the Print Server Leave the settings boxes blank and Click Save amp Next if you don t use the AppleTalk protocol Apple Talk Settings AppleTalk Enable v AppleTalk Zone Name SYSTEM Wireless General Setting Printer Type LaserWriter Encryption Save Settings Done Internet AppleTalk is a data communication protocol often used by
35. d This wizard helps vou install a printer or make printer connectors IF You have a Plug and Play printer that connects through a USB port for any other hot pluggable port such as IEEE 1394 infrared and so on you do not need to use this wizard Click Cancel to close the wizard and then plug the printer s cable Into your computer or point the printer toward your computer s infrared port and turn the printer on Windows will automatically install the printer for you To continue click Mest Cancel 126 Step4 Select A network printer or a printer attached to another computer Click Next Add Printer Wizard Local or Hetwork Printer The wizard needs to know which tupe of printer to set up Select the option that describes the printer you want to use Local printer attached to this computer i vo To setup a network printer that is not attached to a print server LD use the Local printer option C Gre w Step5 Select Connect to a printer on the Internet or on a home or office network and enter the URL of printer server The URL format is http IP 631 Port Name The IP should be the printer server s IP The number 631 is IPP standard port number Port Name is the port name of printer server that your printer is connected to The default port name is Ipt1 One example of the URL is http 192 168 3 66 631 lpt1 After entering the URL of printer server cli
36. d join the same group before they can use this printer server by SMB protocol Pass Job when Error Occurred When the printer is interrupted because of paper out or off line while printing user can set the interval time to bypass the current printing job Or the printing document will not be printed completely or with unformatted messages Waiting time to passjob is for you to set up the interval time to bypass the current printing job The range is from 1 to 120 seconds Note SMB does not support Linux and MAC OS 93 7 13 Wizard E Server Manager 3 8 39 Sele File Help Print Server Setup wizard PS256002 Date Time Message 124 2 2005 2 54 50 PM Welcome 1249 2 2005 2 54 51 PM Searching Please Wait 1249 2 2005 2 55 00 PM 1 server found 121 2 2005 2 55 15 PM Verification Successful Click Wizard icon on the tool bar the setup wizard item of the current selected printer server will be showed on the right side of the window Double click the Printer server Setup Wizard the setup wizard will guide you through all the setup process 94 Step 1 Set up the name of this printer server and select to enable disable or auto the wireless function Print Server Setup Wizard P5256002 General Settings Server Mame Wireless Function oo Auto f Enable f Disable Cancel Next Step 2 Select to enable required printing protocol Please refer to section 7 6 for detail
37. ddancanatesd 126 10 WINDOWS XP SP2 SETUP 0 eeeeeeeeeeeeeeeeeeeeeeees 130 1 Introduction 1 1 Product Introduction Thank you for purchasing LevelOne printer server This printer server allows your printer to become a shared device on the network It offers printing flexibility and manageability on your Local Area Network at an extremely low cost and with an absolute minimum setup and maintenance required This printer server provides IEEE 802 11g b wireless LAN up to 54Mbps data transfer rate an Ethernet network port 10 100Mbps Ethernet and one print port for printer also supports IPX SPX NetBEUI TCP IP and AppleTalk protocols It is the best network printing solutions for various common network operating systems such as Windows 98SE ME 2000 XP NetWare Unix Linux and MAC OS etc With the help of Installation Wizard you can easily and instantly complete the settings for the printing environment and start enjoying the fantastic features provided by the printer server In the following chapters we will introduce in detail the printing features installation methods and system configuration for different network environments If you would like to set up and install printer server quickly please refer to the Quick Installation Guide that comes along with this printer server 1 2 Product Package LevelOne WPS 9121 WPS 9122 contains the following components Printer Server Antenna Power Adapter Quick Installa
38. de support both WEP and WPA PSK encryption 8 4 2 3 Site Survey Print Server Microsoft Internet Explorer fe fe x File Edit view Favorites Tools Help ay Q sack QJ x a A x Search e Favorites 2 A ee E 3 Address a http 192 168 2 2 i Go Links This page provides tool to scan the wireless network If any Print Server or IBSS is found you could choose to connect it manually when client mode is enabled Click Select to continue Wireless Site Survey WLAN Function SSID BSsID Channel Type Encrypt Signal Select AlexLien 00 0e 2e 64 7b 12 1 Infrastructure Open 70 O 2 ib ra f SNMP NetWare AppleTalk Save Settings El Done Internet You can use this Site Survey function to search for available access points in you location In the list is the information of all available access points or wireless stations includes SSID BSSID Channel Type Encryption and Signal Strength You can select one wireless device in the list for this printer server to associate with or you have to use General Setting to manually setup the wireless parameters There is WLAN Function setting for you to setup Auto Disable Enable wireless function of the printer server here Please refer to section 8 4 2 1 to know more about the setting The printer server will be connected to the wireless device you have selected Refresh click Refresh to update the list Next Page When Next Pag
39. e InjiType Parallel LPT1 InjUse interrupts Yes IRQ CL 3 y InjWse X On X OF 13 Press Escape and answer Yes to the Save Changes question 14 Select Queues Serviced by Printer then select Printer O or Printer 1 Printer 2 and press Enter 15 Press nsert and add your newly created print queue to the list of queues serviced by the printer Enter a priority number for the queue service or press Enter to accept the default 58 16 Repeatedly press Escape to exit the PCONSOLE program 17 Reset the printer server to have the changes take effect NOTE lf the printer server you have is with multiple printer connectors you may create multiple print queues and printer objects Your printer server should now be ready to use You should be able to redirect printing to your printer server using a CAPTURE command such as the one shown in the previous section 59 6 Unix System Network 60 6 1 Unix Introduction The printer server is available for TCP IP printing by Unix LPD Line Printer Daemon protocol The LPD protocol originated with Unix release is based on the BSD version of Unix and supported under most versions of Unix This chapter explains how to configure the printer server for TCP IP operation and how to modify configuration files on your Unix system to allow printing to the printer server The configuration examples in this manual follow the syntax for BSD based Unix systems Pl
40. e is clicked you will go to the Encryption page Submit Click Submit to confirm the connection with the wireless device 115 8 4 3 TCP IP A Print Server Microsoft Internet Explorer fe x File Edit view Favorites Tools Help ay Q Back J x a A P Search ge Favorites 2 R v amp 33 Address http 192 168 2 2 v E co Links This Menu allows you to configure TCP IP settings for the Print Server Click Save and Next to continue TCPIIP Settings O Enable Obtain TCP IP settings automatically use DHCP BOOTP Wireless Disable Use the following TCPIIP settings EENE TE EE IP Address 192 168 2 2 Subnet Mask 255 255 255 0 SYSTEM Encryption Gateway 0 0 0 0 Print Server DHCP Server Start IP 0 0 0 0 SMB Range 0 DNS Subnet Mask Gateway Site Survey SNMP NetWare AppleTalk Save Settings Internet You can configure the printer server to automatically get IP from DHCP server or manually specify static IP The printer server also has a built in DHCP server You can enable this DHCP server and let it manages IP for you If you need the printer server to automatically get an IP from DHCP server select Enable Obtain TCP IP Settings Automatically Use DHCP BOOTP You also can select Disable Use the following TCP IP Settings to manually assign IP Address Subnet Mask
41. e 3 Address http 192 168 2 2 vE Links This Menu allows you to configure general system settings of the Print Server Click Save and Next to continue System Settings Print server Name P5256002 Password eeese Re type Password eeee SNMP NetWare AppleTalk Save Settings Done Internet You can change the printer server name and password of the printer server from here Printer server Name the name of the printer server You can use this name to identify the printer server when you are searching for the printer server by the administration and client utilities Password enter the password you want to change to the printer server The password can be up to 7 digit alphanumeric format The default password is 1234 Re type Password enter the password you want to change to the printer server again 110 8 4 1 1 Advanced Settings Print Server Microsoft Internet Explorer fe I x File Edit view Favorites Tools Help ay Q sack amp x a 7 pe Search e Favorites 4 B eS 33 Address http 192 168 2 2 Eco Links This page allows you to configure Advance settings for the Print Server Click Save and Next to continue System Configure IPX Disable v TCPIIP Printing LPR IPP RAWI SMB NetBEUI Disable v AppleTalk Printing Disable v SMB SNMP NetWare AppleTalk Save Settings Done
42. e and auto the wireless function and set parameters that are used for the wireless stations to connect to this printer server from here The parameters include Function Mode ESSID and Channel Number You can manually set the parameters of wireless LAN in this page or use the Site Survey function to automatically search for an available access point and associate with it Function is for user to disable enable or let the printer server auto select to connect to the wired or wireless network If Disable is selected the printer server can only connect to the network through wired Ethernet If Enable is selected the printer server can only connect to the network through Wireless LAN If Auto is selected the printer server can automatically decide to enable or disable the wireless function The printer server only can work in ether Ethernet or wireless LAN mode It cannot work in both Ethernet and wireless LAN mode at the same time When the printer server starts up it will auto detect if the LAN port is connected to an active network by an Ethernet cable If the printer server is connected to an active network by Ethernet cable when starting up the printer server will run in Ethernet mode If the printer server is not connected to an active network by Ethernet cable when starting up the printer server will run in wireless LAN mode The printer server default is in Auto mode Mode is the operation mode
43. ease refer to the related system documentation for the correct syntax of your systems To configure the printer server for LPD printing perform the procedures below 1 Enable Printer server s TCP IP Support 2 Setup Printer server s IP address 3 Verify Printer server s IP Address 4 Configure remote LPD printing on the host 5 Print atest page In the next sections we will describe these five procedures step by step 61 6 2 Enable Printer server s TCP IP Support The default configuration of the printer server is with TCP IP support enabled Anyway you can configure the printer server to enable TCP IP support using the configuration program 62 6 3 Setup Printer server s IP Address The printer server must have a unique IP address in order to be recognized by the network You can set up the IP address on the various Unix systems using any one of the following methods 1 DHCP Dynamic Host Configuration Protocol 2 BOOTP Bootstrap Protocol The printer server will use the last three methods to obtain its IP address automatically if its IP address is configured as Auto 0 0 0 0 6 3 1 DHCP There are many Unix systems that support DHCP protocol and the procedures to configure the DHCP server database are different This manual does not describe the DHCP server configuration on the Unix systems It is highly recommended that the DHCP server should be located on the same network as the printer server
44. eeeeeeees 48 4 2 Windows 2000 Installation and Setup 49 4 3 User Installation and Setup 00 50 5 Netware Network ccccccsccceeccesnccssccesncenses 55 5 1 System Architecture c eee 56 5 2 NetWare 3 x 4 x 5 x Installation amp Setup57 5 2 1 Installation Using PCONSOLE ccceeeeeeee 57 5 2 1 1 Configuring as Printer server Mode 57 6 UNIX SYSTEM NETWORK cccccseceeceeeeseeeeeeeeeeeeeeeees 6 1 Unix Introduction cceeeeeeseeeeeeeeeees 61 6 2 Enable Printer server s TCP IP Support62 6 3 Setup Printer server s IP Address 63 6o CP ecceaschacesterata a 63 C82 BOOTP een A ra eset eee 63 6 4 Verify Printer server s IP Address 66 6 5 Configure Remote LPD Printing on the p EN PE E EE EOE EE D 67 7 ADMINISTRATOR CONFIGURATION UTILITY Tel NATO GQUCUOW rinore 70 7 2 Search for All Available Printer server 71 7 3 Status of Printer server c 008 72 7 4 Setup the Printer server 73 7 5 AppleTalk Configuration 0 74 7 6 General Configuration cccce 79 7 f Netware Printer server Configuration 80 7 8 System Configuration 0c0 81 7 9 TCP IP Configuration ccc 83 7 10 Wireless Configuration 85 7 11 SNMP Configuration 0 92 7 12 SMB Configuration ccceeee 93 ENS WIZA O e
45. f or Guest 128 bit WEP input 26 digit Hex values in the A F a f and 0 9 range or 10 digit ASCII characters as the encryption keys For example 01234567890123456789abcdef or administrator WPA PSK Security Mode Print Server Microsoft Internet Explorer mek Fie Edit view Favorites Tools Help ay Q sack amp x a A pe Search 5 Favorites 4 A amp E 33 Address http 192 168 2 2 EJ co Links Encryption allows your data being transmitted over the wireless network securely If this function is enabled please make sure your wireless stations are using the same encryption keys as the Printer Server Click Save and NEXT to continue Encryption Setting Mode WPA PSK WPA algorithms v WPA Pre Shared Key SNMP NetWare AppleTalk Save Settings Done Internet When WPA PSk also named WPA shared key requires users to select the advanced encryption methods i e TKIP and enter a set of shared key TKIP TKIP Temporal Key Integrity Protocol changes the temporal key every 10 000 packets This insures much greater security than the standard WEP security 114 WPA Key Enter 8 to 63 digits of ASCII format to be the key for the authentication within the network When you finish configuring the wireless security click Save amp Next to confirm the configuration Note Infrastructure Mode and Ad Hoc mo
46. for clients are classified as following Windows 98SE ME 2000 XP Our printer server system provides PTPP Peer to Peer Printing driver and utilities for Windows 98SE ME 2000 XP users PTPP Peer to Peer Printing supports TCP IP protocol In the client installation procedure after PTPP Peer to Peer Printing Driver is installed into Windows the system will automatically manual configuration is also allowed search all the printer servers on the network and then add their printing ports into Windows printing port see below 11 DOHI Correa Pot l OOM jOiminrea Fai E d Print Server MIS 1 UNIX Linux UNIX include HP UX SCO Unix SunOS Solaris Unixware DECUnix IBM AIX and others and Linux use the system standard LPR to print through printer server MAC OS MAC OS can use the system standard AppleTalk network to print through printer server 12 1 3 3 Network Printing Functions for Network Server Common network servers are classified as following Windows 2000 Our printer server system provides PTPP Peer to Peer Printing driver and utilities for Windows 2000 After PTPP is installed the server can directly print through printer server Adding this printing function into Windows 2000 allows print queue user authority management and many other advanced features to be used NetWare 3 x 4 x 5
47. he default printer unless you specify Othernyise Do vou want to use this printer as the default printer 128 Step8 You have added the network printer to the PC successfully The information of the printer is displayed in the windows Click Finish Add Printer Wizard Completing the Add Printer Wizard Tou have successtully completed the Add Printer Wizard You specited the following printer settings Name unknown on http 192 168 3 66 631 Default Tes Locatiory Comment To close this wizard click Finish Cancel 129 10 Windows XP SP2 Setup In Windows XP SP2 XP SP2 s firewall would block the unknown communications This printer server has allowed the communications data passed through the XP SP2 s firewall In case that you do not find any printer server listed on the Available Ports in Network Ports Quick Setup please follow the steps below Step1 Click Start choose Settings and select Network Connections Step2 Right click Local Area Connection and select Properties s Network Connections File Edit View Favorites Tools Advanced Help Ly Bact gt Pi e Search eer Folders ies Address e Network Connections LAN or High Speed Internet Network Tasks 1394 Connection T Create EPEN Connecter gt Disabled Firewalled connection 3 eR PROJ100 VE Malati k ox a 1394 Net Adapter Set up a home or small office network
48. i Internet Backgammon amp Internet Checkers 4 Internet Explorer P Internet Hearts a Internet Reversi C Program Files Internet Cameraradmins admi Change scope 132 Step6 Open the NPUtil file from C Program Files PrintServer Utilities where C is the system drive Look in 9 PrintServer Utilities Oo a EF Ei C NetWare 3 WebDESK Administrator My Recent O winLtil Documents Remake Uninstall File name MPLl w Files of type Applications exe comic Add a Program To allow communications with a program Gy adding it to the Exceptions list select the program or click Browse to search for one that i not listed Program x Internet Explorer PP Internet Hearts f Interet Reversi Internet Spades wi Minesweeper y3 MSH Explorer PETT m Q Finbal l PrintServer Configuration a Pro agic 133 Step8 Click Ok You have completed the setting The Windows XP SP2 will allow the incoming network connections activated by the program Windows Firewall Eg General Exceptions Advanced Windows Firewall is blocking incoming network connections except for the programs and services selected below Adding exceptions allows some programs to work better but might increase your security riek Programs and Services File and Printer Sharina Network Ports Quick Setup Remote Assistance CI Remote Desktop LJ UPnP Framework o Add Program Add P
49. ilities in the default folder or click Browse to specify the destination folder where you would like to install the utilities Print Server Utilities 2 0 79 Setup Print Server Utilities 3 8 39 Choose Destination Location Setup wi ratal PortServer Usines to the following bidar To instal to this folder cick Hat araos oma eanan You can choose not to natal PrintServer Utes by selecting Cane to ent the ratakin progon Destination Folder C Progan PierPantServer Unines 23 Select the components you want to install It is highly recommended to install all provided components Click Next to continue i Print Sarrar Wililime 3 8 27 Sahiap Print Server Utilities 3 8 39 Stleet Comporcinis Seldi the cumpononds you mard in rakal clear the compan you do pa pial i 26 Specify the program folder where the program icons will be added to click Next z Print Sarvar Unities 3 8 27 Setup Print Server Utilities 3 8 39 Select Program Folder Tadap wil add piian ices te tha Program Felder Biad below You arpa lokia naag of pokati one lor the embry Fokjen ioi Chock Mest ts The system will start to install the utilities automatically gt Prini Servar LHilhies 2 8 29 Setup Print Server Utilities 3 8 39 2 You have completed the installation phase and prepare to configure the Printer server The Choose Printer server will list all Printer servers within the network Se
50. lect the Printer server you would like to configure and click Next If there is no printer server found please check the printer server has been installed to the network properly If you want to configure the printer server later please click Cancel Then the drivers and utilities installation will be finished Pring Server titities 2 0 39 Setup Print Server Utilities 3 8 39 i ther Print Soren be wratiieed for the feet tren tee Pent Server Hame i thet Last E di MAC ID ofthe Pari Server rath PS pret NOTE If this is the first time you configure the Printer server the Printer server Name is the last 6 digit of MAC ID with prefix PS Please check the MAC ID on the printer server NOTE The list can only display the devices from the same manufacturer 28 Specify a recognizable name for the Printer server and click Next Print Server Utilities 2 8 39 Setup Print Server Utilities 3 8 39 Name the Print Server Device nane A TOAL The unique terial number of the piri serves Ate None EEE 29 Specify the IP Address for the Printer server manually or click Next to keep default IP Address i e 192 168 2 2 Print Server Utilities 3 8 39 Setup Print Server Utilities 3 8 39 Netwerk Prelecel and IP Address Configuration i a Thes pari server not supports IP NetBE LE network piotocols C Aenign the Pant Server an P address The co
51. less to connect to your Wireless Access Point please select this mode lf you wish to connect head to head wih another Wireless client please choose this mode Wireless Function Auto Enable Disable Cancel Bees eset Double Click Wireless icon and the wireless configuration window will pop up If you use access point to build up wireless network you have to select Infrastructure Mode If you do not have any access point and want to use peer to peer connection to build up wireless network you have to select Ad Hoc Mode After selecting the operation modes of the wireless function click Next to go to further detailed configuration Infrastructure Mode 85 Wireless P5256002 Connect to Your Wireless Network f Scan For Your local Wireless Metvvork Let the Vizard automatically scan for your Wireless Netvrork SSiD Assign Your Wireless Network Manually Enter your oven Wireless Metvyork ID SSID Manually lt Back Mext gt In the Infrastructure mode you have to let the printer server associate with an access point You let the printer server scan for an available access point automatically or manually assign the SSID of the access point you want to use If you select to let the printer server scan for an available access point the following window will pop up Wireless P5256002 sao s s IDs hart 11 00 0E 2E 44 25 40 Ple
52. ly If this function is enabled please make sure your wireless stations are using the same encryption keys as the Printer Server Click Save and NEXT to continue Encryption Setting Mode v Key length 64 bit v Key format Hex 10 characters Passphrase ene Enter a key into the table Default key Key v SNMP Key 2 ren NetWare AppleTalk Save Settings Done Internet Key Length You can choose 64 bit to use WEP with 64 bit key length encryption or choose 1 28 bit to use WEP with 128 bit key length encryption The longer key length can provide better security but worse transmission throughput Key Format You may select to use ASCII Characters alphanumeric format or Hexadecimal digits in the A F a f and 0 9 range to be the WEP Key PassPhrase A passphrase simplifies the WEP encryption process by automatically 113 generating the WEP encryption keys for the printer server Default Key Select one of the four keys to encrypt your data Only the key you select it in the Default key will take effect Key 1 Key 4 The WEP keys are used to encrypt data transmitted within the wireless network Fill the text box by following the rules below 64 bit WEP input 10 digit Hex values in the A F a f and 0 9 range or 5 digit ASCII character as the encryption keys For example 0123456ae
53. me Printer server Name Model Type Firmware Version MAC Address Wireless LAN Status and the protocols enabled status etc 103 8 3 2 Printer Print Server Microsoft Internet Explorer File Edit View Favorites Tools Help ar Back gt x a A 2 Search Pp Favorites A Media E2 2R a ce An Address http 192 168 2 2 v gj co Links 7 This page displays the information of each printer connected to the print server Note if your printer does not support bi directional function some information will no displayed correctly SYSTEM Manufacturer Model Number det Printing Language Supported SMB Current Status Off_line SNMP NetWare J AppleTalk M Lit gt Done Internet This page lists information of printers connected to all printer ports 104 8 3 3 TCP IP Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ae 5 A A i gt A g ack K w oo Ye Search Favorites A media 4 Va G Address g Go Links http 192 168 2 2 v This page displays the current TCP IP settings of the print server TCPIIP Settings SYSTEM Use DHCP IBOOTP Off IP Address 192 168 2 2 Subnet Mask 255 255 255 0 Gateway 0 0 0 0 Use DHCP Server Off Printer Ul SMB SNMP NetWare AppleTalk Ki ti Done Internet A v This page lists all TCP IP setting
54. nctions Please refer to Chapter 7 for the detail instruction of the configuration Remote Ports Add the network port of remote printer server to your PC Uninstall Assistant for removing all installed administrator software amp PrintServer Utilities File Edit View Favorites Tools Help a a gt DO search gt Folders E Address ay C Documents and Settings All Users Start Menu Programs PrintServer Utilities Qs Network Ports Quick Setup PrintServer Configuration File and Folder Tasks A N Shortcut ame Shortcut 1 KB 1 KB 3 Make a new folder a Publish this Folder to the Remote ports Uninstall web Shortcut wi Shortcut E3 Share this Folder 1 KB E Ba Other Places ff Programs My Documents O Shared Documents i My Computer My Network Places Details 32 3 4 Client Installation and Setup The Client Installation can be performed on Windows 98SE ME 2000 XP with the same user interface Before the installation procedure please confirm that your PC has connected to the network and installed at least one network protocol Insert the CD shipped along with the printer server into your CD ROM drive The Autorun exe program should be executed automatically If not run Autorun exe manually from CD ROM drive s root directory The Installation Manager will be displayed on the screen as follows Select WPS 9121 9122 Opintrtere GaerReverPe WIRED WIRELESS MINI PRINTER SERVER FPS 9
55. nfiguration summary is displayed in the window Now you have completed the Printer server Setup Click Finish and your system will add network port of the Printer server to your PC automatically Print Server Utilitie 3 8 39 Setup Print Server Utilities 3 8 39 Add Network Port Device Nene gt ou RSSA fate TCPAP agoa trate P Addons Atngusa F rus 30 The Administrator Installation procedure is totally completed Click Finish Print Server Utilities 2 8 39 Setup Print Server Utilities 3 8 39 The Administrator Installation Program has executed the installation procedure that performs the following tasks Install all utilities and drivers to the administrator s PC Configure the printer server including the printer server name and network protocol Add the network port of the printer server to the administrator s PC If you want to print from this administrator s PC to the printer server all you need to do is to perform Windows standard Add Printer procedure please refer to Section 3 6 31 3 3 Administrator Utilities After Administrator Installation is completed there will be four utilities in printer server s Program folder Network Ports Quick Setup Add the network ports of printer servers within the network to your PC Printer server Configuration Allows you to configure the printer server s IP Address network protocols and other advanced fu
56. niran aa cares 94 LIA REDONE coooa 99 8 WEB MANAGEMENT ccccccceeeseeeeeeneeeeeneeseseneoneeees 100 Sot NMTOQUCUON einan 101 O2 COO ocs 102 8 3 Device SlatUS srodan 103 Ool SVS 2 per E 103 Sie PAMO aca E a T 104 or EEP sae ee A 105 Oow OMB oceans a i r 106 O ONM P eee a eet cocsom caged anes diasenasugs 107 OO NOWI O cinan i 108 o APPENA eaaa nee 109 8 4 Setup WIZAMA cccccccceeeeeeeeeeeeeeeeeeees 110 Orel SDV SUSI E EEEE 110 8 4 1 1 Advanced Settings ccccecceceeeeeeeseeeeeeees 111 GAZ NVIRCICSS i ccscnccaccare NERE 111 8 4 2 1 General Setting cccccccsscceeeceeseseseeeeeesees 112 8 4 2 2 PICT VOU OM co rece ce nE EN ata dean cet eoceegnenteare 113 8 4 2 3 SE SUVE V e 115 oar TORIR a ora eee ree erred etne er nen ore 116 GAA OMB sscesenseanssecoteesantamnensnesseessazeenaneresetonecemsateaseaee 117 DAS ONME sensce cxncapatarsanatade aatsnnananessemamtetescenaiedeaimacscedtt 118 GAO NONVA Ceca rto eden E 119 SA PODICTANK cornier AA 120 8 4 8 Save Settings cc cccccccsccseeseeeceessseceesesesseeees 121 6 9 SVStEMm TOOLS scat 122 S91 Load Dela ll iseni Enp Enni rnein 122 8 5 2 Upgrade Firmware from Browser 0008 123 OTP PRINTING crsa N te 124 91 NER OCU CON OI csu 125 9 2 System Setup eceeeeeeeeeeeeeeeeeees 126 9 2 1 Printer Server SIC c ccccccceecceeceeeceeeeeeeeeeaes 126 G22 CHEN SIGS cso sezccacacadd nveuncsaceienonpeetetantenna
57. ocuments will print to the first free checked port Description Printer Serial Port Serial Port Serial Fort Serial Fort Print to File PS256002 P1 Printierver Network HP Laserntet Enable bidirectional support Enable printer pooling Apoy 42 3 6 Windows Add Printer Procedure After adding a Network Port of the printer server to your PC by Administrator or Client Installation Program you can follow the procedure described below to add printer to the Windows Note that following Add Printer steps are running in Windows XP the steps in other Operating Systems are similar Step1 Click Start choose Settings and select Printers and Faxes Step2 Click Add a Printer Step3 The Add Printer Wizard is displayed Click Next Add Printer Wizard Welcome to the Add Printer g Wizard This wizard helps vou install a printer or make printer connectors IF You have a Plug and Play printer that connects 1 through a USB port for any other hot pluggable port such as IEEE 1394 infrared and so on you do not need to use this wizard Click Cancel to close the wizard and then plug the printer s cable Into your computer or point the printer toward your computer s infrared port and turn the printer on Windows will automatically install the printer for you To continue click Mest Step4 Select Local printer attached to this computer and make sure that A
58. of wireless station You can choose ether Ad Hoc or Infrastructure mode If you do not have any access point and want to use peer to peer connection you have to choose Ad Hoc mode If you have an access point as the wireless LAN infrastructure you have to choose Infrastructure mode 112 ESSID is the unique name identified by in a wireless LAN The ID prevents the unintentional merging of two co located WLANs Please make sure that the ESSID of all stations and access points in the same WLAN network are the same Channel Number is the channel number of your wireless LAN Please make sure that the channel number of all stations and access points in the same WLAN network are the same Under infrastructure mode channel cannot be selected site survey only 8 4 2 2 Encryption This printer server supports WEP and WPA PSK security mode If you want to use WEP encryption to protect your wireless network you have to select WEP If you want to use WPA PSK you have to select WPA shared key The wireless security setting should be the same with other wireless devices in the same network WEP Security Mode Print Server Microsoft Internet Explorer Aag Fie Edit view Favorites Tools Help ay x A ra ia 2 Q Back gt x a A yp Search ke Favorites 2 Cy Sp El 3 Address http 192 168 2 2 v EJ co Links Encryption allows your data being transmitted over the wireless network secure
59. onfiguration page you can select to enable disable each printing or management protocol upgrade the new firmware for this printer server and enable disable wireless function Upgrade Firmware You can use this Upgrade Firmware tool to update the newest firmware of the printer server Click button and select the correct firmware in your PC After selecting the firmware file click the Upgrade button to finish the firmware update process If you want to reset the Printer server to default factory settings please click Load Default Wireless Function You can select Enable or Disable to manually enable or disable the wireless function If you manually enable wireless function the printer server s wireless LAN will be always enabled and Ethernet will be always disabled If you manually disable the wireless function the printer server s wireless LAN will be always disabled and Ethernet will be always enabled You also can select Auto to let the printer server automatically decide to enable or disable the wireless function The printer server only can work in ether Ethernet or wireless LAN mode It cannot work in both Ethernet and wireless LAN mode at the same time When the printer server starts up it will auto detect if the LAN port is connected to an active network by an Ethernet cable If the printer server is connected to an active network by 81 Ethernet cable when starting up the printer
60. ort Display a notification when Windows Firewall blacks a program What are the nske of allowing exceptions far 134 135
61. ot Shared Fort PS256002 P1 Model HP Laseret Default Yes Test page Yes To close this wizard click Finish Cancel 4 Windows 2000 Network 47 4 1 System Architecture In Windows network environment other than the Peer to Peer network printing architecture described in the previous chapter we also offer the Server Based Printing architecture for Windows 2000 server Only one Windows 2000 is required to have Windows PTPP Peer to Peer Printing driver installed and share the printing service on the network Other network users can simply connect to the server and access the shared printer see below Windows 2000 48 4 2 Windows 2000 Installation and Setup Please follow the procedures described below for installation and construct a peer to peer connection PTPP between Windows 2000 and Printer server Widow 2000 Step1 If this is your first time installing printer server please install the administrator software on Windows 2000 first Refer to section 3 2 for installation instructions If your network has already installed a working printer server and your Windows 2000 has not yet installed the PTPP driver please install the client software Refer to section 3 4 and 3 5 for installation instructions Step2 Please add configure the Peer to Peer Printing of the Windows 2000 network printer and verify that you can print from Windows 2000 to the printer server by the installed PTPP driver Step3
62. our CD ROM drive The Autorun exe program should be executed automatically If not run Autorun exe manually from CD ROM drive s root directory The Installation Manager will be displayed on the screen as following Select WPS 9121 9122 gt eo ie ee oe ee a od WIRED WIRELESS MINI PRINTER SERVER FPS 902 1 9022 CD CONTENTS WPS 9121 9122 EXIT IWW LEVEL 1 COM T DOiniTaAL Dar fA COMMUNICATIONS INE ALL RIGHTS REBERVED 23 Click Administrator Utility mise ma VV en ee 11G WIRELESS MINI PRINTER SERVER ADMINISTRATOR UTILITY PREVIOUS PAGE CUENT UTILITY EXIT USER MANUAL HITP www LEVEL l COM Corrmiany 200S5 OigitaL DATA COMMUNICATIONS ING ALL RIGHTS RESERVED The Utilities Setup window will be displayed Click Next r Print Server Utilities 2 8 39 Setup Print Server Utilities 3 8 39 Welcome 1o ihe Print Server Utilities 3 8 99 Setup Program and drivers the Gin barvit selup pastes Ade the print server netreah piri por bo poa ampui B iii ibongip recommended thai yos ad all Winde pogai Beton running fi Setup pig ar f Click Cancel to quit Setup and then clogs ang peograma ou Borea irrg Cik Hid es erento adh Ch Samet praa haa Dia te by apah Uironakripad agathon i Poon of il map repa im payee chi and cominal penser ai wall bes pecerzated In he aaa itari pirihi urkir Liew 24 Click Next to install the ut
63. provides the most complete management and configuration functions on the printer server side This utility only provides configuration functions for printer server itself it does not include configuration functions for client side or other file server or NetWare server in the network environment The Configuration Utility provides the following configuration and management functions Search Printer server Search All Available Printer Servers on the Network Printer server Status Display Printer server Network Status AppleTalk Configuration AppleTalk Protocol Setting General Configuration General Information of printer server NetWare Configuration NetWare Printing Configuration System Configuration Printer server Network Ability Setting and Firmware Upgrade TCP IP Configuration P Address and DHCP Server Configuration Wireless Configuration Wireless LAN Configuration SNMP Configuration SNMP Information Configuration SMB Configure the SMB Group Name Setup Wizard Guide You Through All the Settings Report List the Status of All Available Printer servers on the Network We will explain each function separately in the following section 70 7 2 Search for All Available Printer server E Server Manager 3 8 39 File Help AAJA Be MAC ID 00 00 564 03 17 27 ge Model Type 1P 8D Version 3 1 234 Jf Server Port Fort 1 Off Line oA TCP IP PS25600 IF Address 192 168 2 2 Subnet Mask 255 255 255 0 Gateway 0 0 0 0 DHCP Se
64. r printer IF your printer came with an installation disk click Have Disk IF your printer i not listed consult your printer documentation for compatible printer software Manufacturer Printers Generic Gestetner IBM Infotec w gt EF This driver is digitally signed Windows Update Have Disk Tell me why driver signing i important ae JERS 44 Step7 Name your printer and setup the default printer click Next Add Printer Wizard Name Your Printer Tou must assign a name to this printer Type a name for this printer Because some programs do not support printer and server name combinations of more than 31 characters itis best to keep the name as short as possible Printer name Do vou want to use this printer as the default printer Yes No cee J new Con Step8 Choose to print the test page or not It is recommended to print a test page Click Next Add Printer Wizard Print Test Page To confirm that the printer i installed properly you can print a test page Do vou want to print a test page SONS 45 Step9 You have added the printer to the PC successfully The information of the printer is displayed in the windows Click Finish Add Printer Wizard Completing the Add Printer Wizard You have successtully completed the Add Printer Wizard ou specified the following printer settings Marne HP Laseret Share name lt N
65. rver Disable q Netare File Server Mame Polling Time 3 jet AppleTalk he Date Time Message 124 32005 3 33 34 PM Welcome 124 32005 3 33 34 PM searching Please Wai 124 32005 3 33 35 PM 1 server found PS256002 Every time when you run printer server s configuration utility click the Search icon Al on the tool bar The configuration utility will delay for several seconds because the utility is using system s available network protocols to search for all printer servers on the network All available printer servers will be listed under Printer server Group on the left side of the window You must select the printer server you would like to configure from the list The system will at the same time display the selected printer server s status on the right side of the window 71 7 3 Status of Printer server E Server Manager 3 8 39 File Help AAJA Sta B9 MAC ID 00 00 84 03 17 27 l aa Model Type 1P 8D Version 3 1 234 3 Server Port Fort 1 Off Line mn 29 TCRIP Pa2o6002 IF Address 192 168 2 2 Subnet Mask 255 255 255 0 Gateway 0 0 0 0 DHCP Server Disable q Netare File Server Mame Polling Time 3 jet AppleTalk he Date Time Message 124 32005 3 33 34 PM Welcome 124 32005 3 33 34 PM searching Please Wai 124 32005 33 3 PM 1 server found Click Status icon CT on the tool bar the status of the current selected printer server will be
66. s of the printer server including IP Address Subnet Mask and Gateway It also displays if the DHCP server is enable or not 105 8 3 4 SMB Print Server Microsoft Internet Explorer File Edit view Favorites Tools Help ay Q Back eP x a A pe Search e Favorites 4 B R 33 Address 48 http 192 168 2 2 v EJ Go Links This page displays the current SMB settings of the print server SMB Settings SYSTEM SMB function Disable SMB Group Name WORKGROUP Pass Job When Error Occured Disable TCP IP Waiting time to pass job 0 Sec Printer SNMP NetWare AppleTalk Done Internet This page lists the SMB group setting of the printer server 106 8 3 5 SNMP Print Server Microsoft Internet Explorer File Edit Yiew Favorites Tools Help Q sx QJ x a A P Search 5 2 Favorites 4 B tee A 3 http 192 168 2 2 This page displays the current SNMP settings of the print server SNMP Settings SYSTEM SNMP System Contact None SNMP System Location None Printer TCP IP SMB NetWare AppleTalk m Done Internet This page lists the SNMP settings of the printer server It includes the settings of SNMP System Contact and SNMP System Location u iv lt 107 8 3 6 NetWare Print Server Microsoft Internet Explorer File Edit View Favorites Tools Help ae Back ad x a A 2 Search
67. server will run in Ethernet mode If the printer server is not connected to an active network by Ethernet cable when starting up the printer server will run in wireless LAN mode The printer server default is in Auto mode Domain Country The wireless channels are different from country to country Generally the channels are from 1 to 11 in USA and from 1 to 13 in Europe The Domain Country setting is for you to set the available channels according to your location MKK is channel 14 for Japan area only MKK1 means channel 1 14 for Japan area only as well 82 7 9 TCP IP Configuration TCP IP P5256002 TCP IP TEFAF Settings DHCP Server Auto IP Static IP l IP Address h g2 4 BS 2 2 Subnet Mask 255 255 255 b Gateway if lo 0 0 Save Cancel TCP IP PS 256002 TCP IP TEPAF Settings M C Auto C Enable Disable Starting Address bo p P e Range booo Subnet Wask b b b p Gateway b be PE e Save Cancel Double Click TCP IP icon and the TCP IP configuration window will pop up You can configure the printer server to automatically get IP from DHCP server or manually specify static IP The printer server also has a built in DHCP server You can enable this DHCP server and let it manages IP for you Click the IP button to enter the IP setting page If you need the printer server to automatically get an IP from DHCP server select Auto IP You also can select Static
68. showed on the right side of the window The information of the printer server displayed are MAC ID Model Type Firmware Version status of each printer port NetWare file server name NetWare file server polling interval NetWare printer queue names IP address subnet mask default gateway AppleTalk printer type AppleTalk zone and printer server printing ability etc w You can refresh the printer server s status by pressing the Refresh button E You can restart the printer server by pressing the Reboot button A Ia 7 4 Setup the Printer server E Server Manager 3 8 39 oe uF Po2sbull AppleTalk SNMP System Wireless Date Time Message 12 4 3 2005 3 33 00 PM Welcome 1249 3 2005 3 36 01 PM Searching Please Wwait 12 1 3 2005 3 36 05 Ph 1 server found Click Setup icon a on the tool bar the setup items of the current selected printer server will be showed on the right side of the window Double click one of the icons to set up the selected printer server A screen will pop up to verify User Name and Password of the printer server The default values are as follows User Name admin Password 1234 Login P 256007 User Mame actin Passyyord as 73 1 9 AppleTalk Configuration AppleTalk P5256002 AppleTalk AppleTalk Settings Zone Mame i Printer Type Port 1 Laservvriter Port 2 Port 3 Save Cancel Double Click AppleTalk
69. tal my Aug and Flay printer e ij 3 Select Connect to this printer or to browse for a printer select this option and click Next and click Next Add Printer Wizard Specify a Printer IFyou don t know the name or address of the printer you can search for a printer that meets your needs 51 4 Search the printer you want to share from the Shared printers and click Next Add Printer Wizard Browse for Printer When the list of printers appears select the one you want to use Printer WFAN HYMEPSON AL 2600 Advanced Shared printers E Printer information Comment Status Ready Documents waiting Back Cancel 5 The following message is informed you that you will start installing the drivers for the network printer Click Yes to continue Connect to Printer x Printer drivers may contain viruses or scripts that can be harmful ta vour computer Itis important to be certain that MY You are about bo connect to a printer on FANNY which will automatically install a print driver on your machine the computer sharing this printer is trustworthy Would you like to continue 6 The following message is popped up to let you know that your computer doesn t have the drivers for the network printer please click Ok to manually install drivers Connect to Printer 2 E x to search For the proper driver click OK Otherwise click Cancel
70. the administrator s computer platform Chapter 9 introduces Printer server s IPP Printing function and setup procedure The IPP Printing provides a convenient way to print documents across the Internet by the IPP protocol Chapter 10 In Windows XP SP2 you may not find any printer server listed on the Available Ports in Network Ports Quick Setup Please follow the instruction in this chapter and resolve the problem 1 6 Printing Function The printer server provides a complete network printing solution The feature set is listed below PTPP Peer to Peer Printing TCP IP LPR IPP Printing NetWare Bindery Printing Apple Talk SMB Printing 2 Hardware Installation 1 Unpack the printer server package and verify that all the items listed in the section 1 2 are provided 2 Connect the printer server to the printer you want to share on the network 3 Connect the printer server to your network by attached the network cable to the UTP port of the printer server 4 Connect the power adapter to the printer server The printer server will perform the Power On Self Test POST after it is powered on During the POST the Status and Ready LEDs will be on When the LEDs are unlighted the printer server is ready NOTE MUST use the power adapter shipped with the printer server do NOT use any other power adapter from any sources NOTE To prevent the compatibility problem between printer server and a few printers it
71. tion Guide CD ROM Including all the software utilities drivers and User Manual 1 3 Network Printing Architecture This section illustrates how printer server functions and operates on the network Before you install and use printer server it is strongly recommended that you read this section completely and select only the chapters you need according to your network operating system by Contents of the User Manual in next section This section will first introduce the role every component plays in the network printing environment Printer Server Client User Network Server optional Network Printing Environment Network Server Print Server 7 x i O E d Windows NT Windows 2000 Windows 98 Workstation p 1 3 1 Printer Server Network Functions Unix 3 g Windows NT Windows 2000 Windows 98 Workstation Because printer server supports IPX SPX NetBEUI TCP IP and AppleTalk network protocols any networked computer can directly print to the printer server from any of its installed protocol Windows HT Windows 2000 Windows 9s Workstation 1 3 2 Network Printing Functions for Clients Unix Common operating systems
72. urty Mode Arani em If you wish to activate YEP Wireless Security or your wireless network is already PassPhrase running wireless security you l may configure your settings fe E4 bit C 128 bit here MoteJAll Wireless Devices g on your network must use the f Key 1 same WEF key to function correctly C Key 2 i Key a C Key 4 lt lt Back Mest Cancel 88 Wireless P5256002 Wireless Security WEP Security Mode YA If you wish to activate YYVEP Wireless Security or your wireless network is already PassPhrase running wireless security you may configure your settings w 64 bit C 128 bit here MoteJAll Wireless Devices on your network must use the i Key same WEF key to function eyo a correctly C Key 3 D Key 4 z Back Next gt Cancel You can select 64 bit or 128 bit length and Hexadecimal or ASCII format for the encryption key Longer key length can provide stronger security but worth communication performance Enter four key values by following the rules below and select one key as the default key PassPhrase A passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for the printer server This setting is only valid when the security mode is in WEP HEX Key 1 to Key 4 If the key length is 64 bit enter 10 digit Hex values or 5 digit ASCII values as the encryption keys For
73. utomatically detect and install my Plug and Play printer is not selected Click Next Add Printer Wizard Local or Network Printer The wizard needs to know which tupe of printer to set up e option that describes the printer you want to Use Local printer attached to this computer OA network printer or a printer attached to another computer i To set up a network printer that i not attached to a print server J use the Local printer option 43 Step5 Choose the suitable Printer server Network Port which was created by the Administrator Installation or Client Installation process and click Next Add Printer Wizard Select a Printer Port Computers communicate with printers through ports Select the port you want pour printer to use If the port is not listed you can create a new port Mote Most computers use the LPT1 port to communicate with a local printer The connector for this port should look something like this L O vw e D A O Create a new port Step6 Select a suitable printer manufacturer and the printer model and click Next If your printer is not in the list click Have Disk to install the driver of the printer After installation the printer model will be added to the list Add Printer Wizard Install Printer Software The manufacturer and model determine which printer software to use ia Select the manufacturer and model of you
74. work ports of printer servers have been added to your computer 38 HP LaserJet Properties General Sharing Ports Advanced Device Settings ye es HP Laseret Print to the following port s Documents will print to the first free checked port Add Port x Description Printer Serial Port PrintServer List Seral Port PS2z56002 P1 192 168 2 2 l f Seral Port al Fo Print to File Printiernver Network HP Lasenlet Enable bidirectional support Enable printer pooling Cancel Apply If you have just installed another new printer server in the network you must run this program first This program will search for new printer servers and allow you to add the new network printer port into clients computer conveniently Perform the standard Add Printer procedure then you can print directly to the printer through the newly installed printer server Select the network ports in the Available Ports list and click gt to add ports If you want to add all available ports please click gt gt To cancel some of the network ports or all ports from the Chosen Ports list please click lt or lt lt 22 Network Ports Quick Setup 3 0 Available Ports Chasen Ports PS256002 P1 Cancel lt 2 Refresh Configure Port Sp ania th Queue 39 Please be aware that Network Ports Quick Setup Utility can only detect and configure all printer
75. x In NetWare environment printer server offers various printing modes like print queue remote printer etc 13 1 4 Network Printing Environment Common network environment are classified as following Windows Peer to Peer Network The client s PTPP driver will use TCP IP protocol to print through printer server TE Dr NetWare Server Windows NT Server TPY RE E oe cee c Y D i a s WVAndows NT VWAndows 2000 Windows 9s Workstation Windows 2000 Network Network printing function will become available after PTPP driver is installed into Windows 2000 Adding this printing function into Windows 2000 allows print queue user authority management and many other advanced features to be used windows 2000 NetWare Network see below 14 Vidndows 2000 15 1 5 Contents of the User Manual Chapter 2 explains printer server s hardware installation and configuration It is strongly recommended to go over The following chapters introduce Chapter 3 Windows Peer to Peer Network Chapter 4 Windows 2000 Based Networks Chapter 5 NetWare Network Chapter 6 UNIX System Network You may select the appropriate chapters and sections to read depending on your network printing s requirement Chapter 7 and chapter 8 introduce printer server s management and configuration utilities on Windows and Web Browser s environment respectively You may select the appropriate management utility according to
76. y a user account with which it can log into the NetWare server 56 5 2 NetWare 3 x 4 x 5 x Installation amp Setup Once your printer server is connected to your Ethernet network you can set it up for use with your networking software 5 2 1 Installation Using PCONSOLE 5 2 1 1 Configuring as Printer server Mode 1 Run the NetWare PCONSOLE program 2 Change the current file server if necessary using the Change Current File Server menu selection Choose the Print Queue Information menu selection 4 Press the Insert key to add a new print queue Type in a print queue name such as PQ or Q1 ge Current File Server t Queue Information 6 You have now successfully created the print queue that your printer server will serve Press the Escape key until the Available Options main menu is displayed 7 Select Printer server Information 8 Press the Insert key to add a new NetWare printer server object The printer server name can be identical to the PSxxxxxx name printed on the label of the printer server 57 ge Current File Server t Queue Information 9 Press Enter to select the newly created printer server 10 Select Printer server Configuration 11 Select Printer Configuration 12 Select Printer O or Printer 1 Printer 2 and press Enter then select LPT1 or LPT2 LPT3 in the Type field If your printer server is with only one port you do not need to configure this Type field Nam
77. y and re scan s Back Mest gt Cancel 87 The list is the scanned active wireless stations Select a wireless station in the list and click Next If you cannot find the wireless station that you want the printer server to communicate with click Scan to let the printer server scan again Both Infrastructure and Ad Hoc mode have to go through the following procedure Wireless P5256002 Wireless Security WEP Security Mode Disable kai lf you wish to activate YYWEP Tene Wireless Security or Your a wireless network is already VWEP ASCIl PassPhrase ate running wireless security you G WPA shared key may configure your settings B here MoteJAll wireless Devices N on your network must Use the f Key 1 same WEF key to function correctly C Key 2 i C Key 3 l Key 4 Back Next Cancel This printer server supports WEP and WPA PSK security mode If you want to use WEP encryption to protect your wireless network you have to select WEP ASCIl or WEP HEX If you want to use WPA PSK you have to select WWPA shared key The wireless security setting should be the same with other wireless devices in the same network The WPA PSK key can be from 8 to 63 characters and can be letters or numbers This same key must be used on all of the wireless stations in the network WEP Security Mode Wireless P5256002 Wireless Security WEP Sec

Download Pdf Manuals

Related Search

Related Contents

Cybernet iOne-H19  ReLANpro 2.7  SR 1300 B/ECO - Caliber Equipment Inc.  

Copyright © All rights reserved. Failed to retrieve file