DWC-HD421 User Manual
Contents
1. 5 automatically depending on the level of light C to BW THLE 5 CDSSET BWLOW COLOR The camera always stays in day mode Color RETURN BW The camera always stays in night mode B W LED LED mode is supported when using external LED light 0 9 Adjusts the light level threshold at which the camera switches from night BW to day Color High number means the higher light level This number should be LOWER than the value of Color to B W C to BW 0 9 Adjusts the light level threshold at which camera switches from day Color to night BW High number means the lower light level This number should HIGHER than the value of B W to Color CDS SET BW LOW Adjusts the filter change signal level when using IR LEDs BW HIGH BW HIGH is default RETURN 25 SETUP DEFECT DET OFF ON Dead Pixel Cancellation automatically removes defective pixels in real time Consult your installer for setup and additional 2 0M MODE 1080P information 720P MODE 60 50FPS LANGUAGE 2 0M MODE IET TEUER 1080P 720P The camera offers the selction of 2 resolutions GREG 60HZINTSC 1080P and 720P TYPE BOX FIWLOCK ON 720P MODE RETURN 60 50FPS If resolution 720P is selected the camera will 30 25FPS automatically adjust to 30 25 frames per second You can also select 60 50FPS if applicable LANGUAGE ENG GER Select a language for the OSD menu Select CHN English German Chinese TDN TEST TEST OFF TEST ON True Day amp Night2. D pO lee LAL WATCHDOG Everything Digital m Snapit HD SDI Indoor Dome Camera DWC HD421D DWC HD421TIR 1111 ge DW ABOUT MANUAL Before installing and using the camera please read this manual carefully Be sure to keep it handy for future reference 06012012 PRECAUTIONS W Do not open or modify W Do not open the case except during maintenence and installation for it may be dangerous and can cause damages W Do not put objects into the unit W Keep metal objects and flammable substances from entering the camera It can cause fire short circuits or other damages Be careful when handling the unit To prevent damages do not drop the camera or subject it to shock or vibration Do not install near electric or magnetic fields Protect from humidity and dust Protect from high temperature Be careful when installing near the ceiling of kitchen or a boiler room as the temperature may rise to high levels W Cleaning To remove dirt from the case moisten a soft cloth with a soft detergent solution and wipe W Mounting Surface The material of the mounting surface must be strong enough to support the camera FCC COMPLIANCE This eguipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a resid
3. far right Use the Y POS to adjust the vertical location of the mask Select 0 top of the screen 31 bottom of the screen Use the X SIZ to adjust the width of the mask Select 0 no display 60 screen wide Use the Y SIZ to adjust the length of the mask Select 0 no display 34 screen tall If necessary adjust the color of the mask from the 8 options available You can adjust the transparency of the mask by selecting only the outline of the mask is visible 4 the entire mask is visible NOTE if the mask s transparency is set to 0 playback video will display the mask as an outline only and the image behind the mask WILL be recorded a 20 DW FUNCTION DNR Digital Noise Reduction reduces the noise distortion on the screen in low light conditions allowing a clear image at night Sellect OFF LOW MIDDLE HIGH MOTION OFF ON If selecting ON define the following menu RESOLUTION Define the size an area with motion has to be to trigger the camera s motion detection The higher the number the smaller the area with motion has to be to trigger the camera s motion detection SENSITIVITY Define the level of motion necessary to trigger the camera s motion detection The higher the number the more delicate motion can be to trigger the camera s motion detection SENSITIVITY Indi 5 RETURN 21 IMAGE SHARPNESS MIRROR FLIP E Edge HLMASK CONTRAST COLOR S
4. You can also set the camera to automatically adjust the focus based on a timer from once every minute up to every ten 10 minutes MANUAL If you want to adjust the focus manually select MANUAL The TIMER menu will be replaced by the FOCUSING menu The FOCUSING menu allows you to adjust the focus using the far near indicators Use the josytick to achieve the desired focusing level LENS TYHPE AF LENS MODE OPTIC ZOOM FOCUS MODE LENS TYHPE AF LENS MODE DE OPTIC ZOOM FOCUSMODE AUTO TDN SYNC RETURN TDN SYNC OFF RETURN TDN SYNC OFF ON If seleced the focus will adjust automatically whenver the camera changes from B W to Color and back 18 FUNCTION AWB PRIVACY DNR MOTION RETURN MIDDLE R GAIN B GAIN RETURN DZOOM 0 112 AWB AUTO AUTO H AUTO L PRESET MANUAL AUTO ext DW Digital Zoom function zooms to the center of the image by default set the zoom level from 0 112 White Balance is automatically adjusted White Balance is automatically adjusted when the Color temperature is high White Balance is automatically adjusted when the Color temperature is low White Balance is fixed with current setting White Balance is manually adjusted Select AUTO ext mode when using external lighting like a hallogen If MANUAL mode is selected define the following menu options KELVIN R GAIN B GAIN The color temperature level that will trigger the AWB Select from L
5. mounting holes into the drywall and Screws insert the drywall mounts Attach the base of the camera Adjust the camera lens and to the wall mount with the snap the dome cover over smaller machine screws the camera module CONNECTING TO MONITORS Use the diagram below to connect the camera to a Monitor or CRT Monitor DC 12V AC 24V CCTV Monitor Second Video Output gt Monitor 300 0mm 11 8 EF x Power Connection 12VDC amp 24VDC Dual Voltage Auto Polarity Detection and Protection All cameras are equipped with a second video output for on site configuration 10 DW CONTROLING THE CAMERA S OSD REMOTELY DWC HD421D and DWC HD421TIR combined with Digital Watchdog s VMAX HD DVR offer the unique feature of controlling the camera s OSD menu focus and zoom from the DVR with no additional cables other than the BNC cable To setup the camera for remote DVR contrlling 1 Go to the camera s OSD menu and select Property Make sure the camera is set to NDT AUX Protocol 2 If you have multiple Digital Watchdog HD SDI cameras connected to the same VMAX HD be sure to assign each camera a different ID See page 15 for more information 3 On the DVR side go to the main menu and
6. select gt Device gt PTZ Enter the channel of the camera you wish to setup Make sure the ID you set in the DVR corresponds with the camera s ID the camera 4 Select FASTRAXII COAX as the protocol in the DVR menu TITLE 1 DISPLAY NONE PROTOCOL NDT AUX BAUDRATE RETURN 11 ADJUSTING THE CAMERA LENS Adjusting the Auto Focus Lens o Push the OSD joystick UP to zoom in Keep holding the joystick until the desired zoom is achieved Release the joystick to stop zooming Once the joystick is released the camera will begin auto focusing to adjust to the new zoom position Push the OSD joystick Down to zoom out Keep holding the joystick until the desired zoom is achieved Release the joystick to stop zooming Once the joystick is released the camera will begin auto focusing to adjust to the new zoom position DW ADJUSTING 3 AXIS GIMBAL The Gimbal mechanism yields maximum rotation and placement as show below Tilting 90 Tilting 82 MODULE OSD MENU PROPERTY EXPOSURE LENS CAMERA ID BRIGHTNESS m LENS TYPE 0 255 0 20 MANUAL DC AF TITLE SHUTTER MODE AUTO MANUAL 1 30 1 60000 OUTDOOR INDOOR FLK Deblur120 Deblur240 L DISPLAY L pss OPTIC ZOOM TELE WIDE NON ID TITLE OFF x2 x3 x4 FOCUS MODE MANUAL AUTO PROTOCOL AGC FOCUS
7. test examines the TDN filter in the camera Consult your installer for setup and additional information To TORY SET NO is the default If YES is selected the camera s settings will return to factory default Note that all personalized settings will be lost FREQ 60HZ 50HZ Selct 60HZ for NTSC or 50HZ for PAL TYPE DOME BOX BULLET Set by manufacturer in the factory Please do not change FW LOCK OFF ON Firmware Lock Function This feature is set by default to OFF It is not recommended to select ON RETURN 26 DW TROUBLESHOOTING Before sending your camera for repair check the following or contact our technical specialist FOR NO VIDEO Check the coaxial cable and make sure it is connected securely Check the lens iris adjustment at the camera s OSD menu Check the power supply and make sure the camera has the proper voltage and current FOR OUT OF FOCUS VIDEO Check the clear dome cover and the lens for dirt or fingerprints Use a soft cloth and gently clean Check the lens manual focal and zoom adjustment The use of a field test monitor is recommended 27 WARRANTY INFORMATION Digital Watchdog referred to as the Warrantor warrants the Digital Watchdog Camera against defects in materials or workmanship as follows LABOR For the initial two 2 years and one 1 year on IR LED from the original purchase date if the camera is determined to be defective the Warrantor will repair or repla
8. ET HUE CONTROL RETURN E Edge ON OFF HLMASK OFF ON RETURN 22 CHROMA 0 20 Chroma sets the quality of the color that embraces both hue and saturation White black and grays have 0 chroma The higher numbers accentuate the brighter colors in the image Default is 7 SHARPNESS OFF 0 10 Sets the image s sharpness The higher the number NORMAL the sharper lines and details will appear in the image COLORI However the sharper the image the more digital noise will be visible MIRROR ON OFF Flips the image horizontally OFF is the default FLIP ON OFF Flips the image vertically OFF is the default Edge enhancement If enabled edges and fine lines will appear sharper in the image High Lux Masking masks ares in the image that are overly exposed to light If ON is selected you can adjust the masking level and color adjust the level from 0 only areas with a COLOR lot of light will be masked 10 RETURN You can also modify the mask s color from the available 8 options BLK WHT YEL CYN GRN MAG RED and BLU DW IMAGE CONTRAST NORMAL HIGH HIGHEST You can adjust the contrast level Normal High and Highest COLOR SET COLOR 1 2 3 Color 1 is the default If the color reproduction on the monitor is not to your satisfactory try changing the color mode to Color2 or Color3 HUE CONTROL R GAIN 50 180 Adjust the amount of red color in the image The higher the number the bolde
9. Gain Control automatically adjusts the video gain to enhance picture brightness in low light conditions The higher number the better sensitivity The default is 20 RETURN 16 LENS LEN AF LENS MODE OPTIC ZOOM FOCUS MODE TIMER OFF 00 00 TDN SYNC OFF RETURN MODE OUTDOOR INDOOR FLK DEBLUR120 DEBLUR240 OPTIC ZOOM DW LENS TYPE AF LENS Auto Focus Lens DC LENS Auto iris Varifocal lens MANUAL Manual iris or Fixed board lens If DC or Manual modes are selected HPE DCLENS the following menu options will be disabled MODE DEBLUR120 OPTICZOOM OPTIC ZOOM FOCUS MODE TIMER FOCUS MODE RETURN TIMER TDN SYNC Offers full range of eletric shutter speed from 1 30 1 60000 Sets the shutter speed to 1 30 Use this Lens mode to avoid color rolling Offers electric shutter speed from 1 30 1 120 Offers electric shutter speed from 1 30 1 240 Both DEBLUR120 DEBLUR240 help avoid motion blur in low light conditions Zoom Range is adjustable from Tele to Wide Available only if Lens Mode is set to AF To adjust the optical zoom move the joystick left and right until the desired zoom is achieved Once the desired zoom is selected the camera will auto focus See page 13 for zoom setup outside the OSD menu 17 LENS FOCUS MODE AUTO When using Auto Focus Lens Focus is adjusted automatically If AUTO is selected the camera will adjust the focus after every optical zoom adjustment
10. ING FAR NEAR NDT AUX 0 20 TIMER OFF 1 10min BAUDRATE RETURN TDN SYNC OFF ON NEN RETURN RETURN um FUNCTION IMAGE WDR BLC DZOOM CHROMA 0 20 MAX DR OFF ON 0 112 SHARPNESS 0 10 MODE OFF BLC WDR AUTO H AUTO L PRESET f MIRROR ADR WOT AUTO ext MANUAL r FLIP ON OFF r BLC ER OFF ON Kelvin R Gain B Gain E Edge ON OFF BLC POS X 0 20 PRIVACY HLMASK OFF ON BLC POS Y 0 20 OFF ON E Level 0 20 Color BLC SIZ X 0 20 30 masks setup position size amp color CONTRAST NORMAL HIGH HIGHEST BLC SIZ Y 0 20 DNR COLOR SET Color1 Color2 Color3 RETURN OFF LOW MIDDLE HIGH HUE CONTROL R GAIN B GAIN MOTION L RETURN OFF ON Resolution Sensitivity RETURN DAYNIGHT SET UP EXIT TDN MODE DETECT DET OFF ON 00 99 aa ff r EXIT AUTO COLOR BW LED 2 0M MODE 1080P 720P No Save Yes Save BWtoC 720P MODE 60 50FPS 30 25FPS RETURN 0210 LANGUAGE ENG GER TEST TEST OFF TEST ON L CDS SET ceria m YES NO BW Low BW High E 902 S0Hz L RETURN TYPE DOME BOX BULLET 14 FW LOCK ON OFF RETURN PROPERTY TITLE 1 DISPLAY NONE PROTOCOL NDT AUX BAUDRATE RETURN DISPLAY NONE ID TITLE PROTOCOL NDT AUX BAUDRATE RETURN DW CAMERA ID 0 255 You can define the camera s ID no from 0 255 For OSD control of multiple ca
11. OW MIDDLE HIGH Adjusts the amount of red in the image Select from 0 20 The higher the number the image will appear red The lower the number the image will appear green Adjusts the amount of blue in the image Select from 0 20 The higher the number the image will appear blue The lower the number the image will appear yellow 19 FUNCTION PRIVACY OFF ON You can hide some parts of the screen for privacy purposes A total of 30 privacy masks are available ZONENO 0 29 ZONE OP Zone Display ON OFF ca X POS X Position 0 57 X POS 0 57 Y POS Y Position 0 31 Y POS 0 31 X SIZ X Size 0 60 512 9760 Y SIZ Y Size 0 34 Y SIZ 0 34 COLOR CYN GRN MAG RED COLOR Privavy Masking Zone Color CYN GRN MAG BLU BLK WHT YEL RED BLU BLK WHT YEL TRANS 0 4 TRANS Transparency 0 4 RETURN Lower number means more transperant To setup a Privacy Zone 1 Go to function menu and select Privacy ON Enter the sub menu All 30 masks will appear in their default position 2 Select the zone number you want to adjust Select from 0 top left mask to 29 bottom right mask 3 You can select to show or hide a specific mask by selecting the mask number going to ZONE OP and selecting ON to display OFF to hide Note to hide all but one mask go to each mask number except the one you want to display and select OFF 4 Use the X POS to adjust the horizontal location of the mask Select 0 far left 57
12. ce the unit with a new or refurbished product at its option at no charge PARTS In addition the Warrantor will supply replacement parts for the initial two 2 years and one 1 year on IR LED To obtain warranty or out of warranty service please contact a Technical Support Representative at 1 866 446 3595 Monday through Friday from 8 30AM to 8 00PM Eastern Standard Time A purchase receipt or other proof of the original purchase date is required before warranty service is rendered This warranty only covers failures due to defects in materials and workmanship which arise during normal use This warranty does not cover damage which occurs in shipment or failures which are caused by products not supplied by the Warrantor or failures which result from accident misuse abuse neglect mishandling misapplication alteration modification faulty installation set up adjustments improper antenna inadequate signal pickup maladjustment of consumer controls improper operation power line surge improper voltage supply lightning damage rental use of the product or service by anyone other than an authorized repair facility or damage that is attributable to acts of God 28 DW LIMITS AND EXCLUSIONS There are no express warranties except as listed The warrantor will not be liable for incidental or consequential damages including damage to recording media without limitation resulting from the use of these products or arising out of any breac
13. ential environment This equipment generates uses and radiates radio frequency energy and if it is not installed and used in accordance with the instruction manual it may cause harmful interference to radio communications WARNING Changes or modifications are not expressly approved by the manufacturer TABLE OF CONTENTS Introduction Installation Camera OSD Menu and Glossary Troubleshooting Warranty Information Specifications DW Features seirena Soo emet 4 Parts and Descriptions 5 Dimensions 2222456445 4 AA Do vbi 6 Included Accessories 2 ets 7 Easy Installations 8 9 Connecting to Monitors 10 Controling the camera s OSD Remotely 11 Adjusting the CamerasLens 12 Adjusting the 3 Axis Gimbal 13 Do uocem ee eL d 14 26 SEES SSE E SE 27 EAD 28 29 FEATURES Sony 1 2 8 CMOS Sensor Highest Resolution 2 1 Megapixels 720P 1080P Mode Selectable 3 5 16mm Auto Focus Lens 4 5X Optical Zoom Double Shutter WDR Wide Dynamic Range at 15fps Range IR with Intelligent Camera Sync HD421TIR Electronic Day and Night HD421D True Day and Night HD421TIR BLC AWB 3D DNR 3D Digital Noise Reduction Digital Zoom 0 112 level HME HLMSK Highlight Masking Exposure Mirror amp Image Flip Programmable Privacy Zone 30 amp Mot
14. h of the warranty All express and implied warranties including the warranties of merchantability and fitness for particular purpose are limited to the applicable warranty period set forth above Some states do not allow the exclusion or limitation of incidental or consequential damages or limitatons on how long an implied warranty lasts so the exclusions or limitations listed above may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state If the problem is not handled to your satisfaction then write to the following address Digital Watchdog Inc ATTN RMA Department 5436 W Crenshaw Street Tampa FL 33634 Service calls which do not involve defective materials or workmanship as determined by the Warrantor in its sole discretion are not covered Costs of such service calls are the responsibility of the purchaser 29 SPECIFICATIONS Image Sensor 1 2 8 CMOS Sensor Total Pixels 2000 H x 1241 V Synchronization Internal Horizontal Resolution 2 1 Megapixels 1920 x 1080 at 30fps Minimum Illumination F1 6 80IRB 0 10 Lux Color F1 6 80IRB 0 01 Lux B amp W S N Ratio 50dB AGC off Video Output HD SDI CVBS Analog Focal Length 3 5 16mm Lens Type Auto Focus ee Brightness 0 20 Shutter AUTO MANUAL Digital Slow Shutter OFF X2 X4 Auto Gain Contro
15. ion Detection Dead Pixels Cancellation 12VDC Support Only a Secondary Video BNC Output PART amp DESCRIPTIONS DW Lens Power input Connctor 12VDC Voltage BNC HD SDI RS485 Bubble Dome Upper Case Camera Control Board 2nd Video Connector Mounting Screws DIMENSIONS IN MILLIMETERS IN Surface Mount 108 4 257 40 5 1 59 C 96 8 3 81 56 3 2 21 C J Top View DW INSIDE THE BOX Included with Snapit Indoor Dome Camera User Manual Mounting Template 2 Machine Screw and 2 Dry Wall Anchors Q Secondary Video BNC Cable Snapit 4 SURFACE MOUNT INSTALLATION INSTRUCTIONS Squeeze the sides of the Q Use the camera s mounting Drill holes into the drywall and camera and separate the template or your camera to insert the drywall mounts into camera module from the mark the holes as required the holes dome cover P Pull wires through and make Adjust the camera lens Snap the dome cover over connections Then mount the position by using the 3 Axis the camera module camera to the wall using the Gimbal included machine screws DW WALL MOUNT INSTALLATION INSTRUCTIONS optional Check to see all parts are in Use the mount to mark the Secure the wall mount to the the box pilot holes are required Drill wall using the
16. l 0 20 Lens Type MANUAL DC AF Lens Mde OUTDOOR INDOOR FLK DEBLUR120 DEBLUR240 Auto White Balance AUTO AUTO H AUTO 1 PRESET MANUAL AUTO EXT Privacy Zones OFF ON 30 Programmable Zones SPECIFICATIONS DW Digital Noise Reduction OFF LOW MIDDLE HIGH Digital zoom 1 112 Chroma 0 20 Sharpness 0 10 Mirror amp Flip OFF ON Highlight Mask OFF ON WDR BLC OFF WDR BLC Language ENGLISH CHINESE GERMAN Operating Temperature 10 C 50 C 14 F 122 F Operating Humidity Less than 90 Non Condensing Storage Temperature 20 C 70 C 4 F 158 F Power Requirement DC12V Only 10V 16V Power Consumption 2 0W 166 7mA Housing Material Plastic Dome Cover Material Polycarbonate Dimensions 108 X 96 8 mm 24 25 X 3 8 in Weight 0 507 Ibs Specification is subject to change without prior notice 31 D pDIGITAL WATCHDOG Everything s Digital 5436 W Crenshaw St Tampa FL 33634 Tel 866 446 3595 813 888 9555 Fax 813 888 9262 www Digital Watchdog com technicalsupport dwcc tv Technical Support Hours Monday Friday 8 30am to 8 00pm EST
17. meras make sure to assign a different ID to each camera See page 11 for more information TITLE 1 You can give the camera a unique title 8 symbols long To set the camera s title select from the following symbols 0 9 A Z and space Example HDSDI123 TITLE 1 H H TITLE 2 D HD TITLE 3 S HDS TITLE 4 D HDSD CAMERAID TITLE 5 HDSDI DISPLAY NONE TITLE 5 1 HDSDI1 PROTOCOL PELCO D TITLE 6 2 HDSDI12 BAUDRATE agon BRS TITLE 8 3 HDSDI123 You can select to display the camera s ID or title on the video by selecting the appropriate option If you are connecting the camera to Digital Watchdog s VMAXHD DVR use the default Protocol NDT AUX See page 11 for more information 9600 is default 15 EXPOSURE BRIGHTNESS 0 20 You can adjust the brightness of the image The higher the number the brighter the image aeui Ad Default is 10 SHUTTER AUTO DSS OFF SHUTTER AGC 20 RETURN AUTO The shutter s speed adjusts automatically based on the light available MANUAL shutter speed can be adjusted between 1 30 1 60000 Available options depend on the Lens Mode See page 17 for more information LENS MODE Available Shutter Speed OUTDOOR 1 30 1 60000 INDOOR FLK 1 30 Fixed DEBLUR120 1 30 1 120 DEBLUR240 1 30 1 240 DSS Digital Slow Shutter OFF x2 x3 x4 The default is OFF Choose x2 3 or x4 for slower shutter AGC Auto Gain Control 0 20 Auto
18. r warm colors will appear B GAIN 50 180 Adjust the amount of blue color in the image The higher the number the bolder cool colors will appear B GAIN RETURN RETURN 23 WDR BLC MAX DR Digital Wide Dynamic Range OFF ON Digital Wide Dynamic Range provides clear images when a strong backlighting is present MODE MODE WDR WGT OFF BLC WDR BLC Back Light Compensation See BLC OSD information below ote 508 WDR Wide Dynamic Range If selected camera BLC SIZ X will automatically adjust to 15 frames per second BLC SIZ Y RETURN WDR_WGT 0 9 Enables the camera to capture clear images in the same frame even when there are both very bright and very dark areas in the same field The higher number the wider the dynamic range The default is 5 BLC OSD OFF ON Backlight compensation prevents subjects in defined areas from appearing too dark when backlighting is present If ON is selected BLC Zone size and location is adjustable BLC POS X 0 20 Adjusts BLC Horizontal Position 07 far right side of the screen 20 far left side of the screen BLC POS Y 3 0 20 Adjusts BLC Vertical Position 0 bottom of the screen 207 top of the screen BLC SIZ X 0 20 Adjusts the width of the BLC Masking area 0 invisible 202 screen wide BLC SIZ Y 0 20 Adjusts the length of the BLC Masking area 0 invisible 20 screen tall RETURN 24 DW DAY8 NIGHT TDN MODE AUTO The camera switches between day and night BWto C
Download Pdf Manuals
Related Search