On-line User`s Manual
Contents
1. Y 13 3 10 Removing your DynaMO0 ssscsccsessssssscsscsesrssssssssessssssesseessesesrsnsesecseesessssesseeseesessssssseesensessssessensonse 16 3 11 Changing eject and format privilege sscsssscsccrecesrsssssscssssessssssecssesesssscsssesensesssseessesseseessersseesonsense 17 jD AI 4 1 Hardware Notes 21 roi rir p 23 S22 MO NNI CH 25 ER OEEANIOECWDPID HR 26 KE BER CI LES NI 0 remos AAE L IIR E E AEE E 26 5 5 What Is a Direct Over Write DOW MO disk eeseeseseseeseeseseseesseceoescosseeroescoesessessoesooeseesoeseoeseessecsoesoseseee 26 6 Further Information iA 6 1 Fujitsu Subsidiaries 27 6 2 Copyright and Trademarks s sssesssscescsscocescsccesesssosoccsesesocsossescc ssosocssssossossesstcossssessoscescsecsosssc ssosssocas ssssvososs 28 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 1 Preface Thank you for purchasing DynaMO 2300U2 The DynaMO is a high performance high reliability Magneto Optical MO disk drive unit that uses 2 3GB 1 3 GB GIGAMO disks and any ISO standard 128 230 540 and 640 MB 3 5 MO disk Using Direct Over Write DOW MO disks you can improve the drive s performance DOW disks however are only available in 540 and 640 MB capacity Before using your DynaMO make sure that y2. A2 Disconnect the USB cable and then connect it again Disconnect the USB cable and then power off the drive Next power on the drive and then re connect the USB cable Make sure that the DynaMO and the USB interface card are recognized in Device Manager From the Control Panel select System click the Device Manager tab Check whether the DynaMO and the USB interface card are recognized Make sure the DynaMO is connected correctly Refer to Connecting your DynaMO Q3 I cannot access the MO disk A3 Make sure that the MO disk is properly formatted for your PC Check that the MO disk 1s properly inserted If it does not work properly eject the disk and insert it again If the Busy Indicator stays on for a long time 1 minute after you insert the MO disk your disk may be dirty or your DynaMO drive may be defective Try another MO disk Make sure that the DynaMO and the USB interface card are recognized in Device Manager From the Control Panel select System click the Device Manager tab and check whether the DynaMO and the USB interface card are recognized 2203 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual Q4 Icannot eject a disk A4 Make sure that no other application is using your DynaMO drive Your PC may have a locked MO disk Check your computer applications to make none of them has locked your MO disk Power off the drive then power on again and tr
3. 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 4 In the left pane select Security Options under Local Policies then double click on Allowed to eject removable NTFS Media iB xl E Local Security Settings Action view e Gim X B Security Settings Re Additional restrictions For anonymous conne None Rely o None Rely on def 09 Account Policies RE Allow server operators to schedule tasks d Not defined Not defined Local Policies Re Allow system to be shut down without havin Enabled Enabled c9 Audit Policy Allowed to eject removable NTFS media Administrators Administrators User Rights Assignment RE Amount of idle time required before disconn 15 minutes 15 minutes QQ Security Options RE Audit the access of global system objects Disabled Disabled e Public Key Policies RE Audit use of Backup and Restore privilege Disabled Disabled a IP Security Policies on Local Mac Bg Automatically log off users when logon time Enabled Enabled RE Clear virtual memory pagefile when system Disabled Disabled RE Digitally sign client communication always Disabled Disabled RE Digitally sign client communication when po Enabled Enabled RE Digitally sign server communication always Disabled Disabled RE Digitally sign server communication when p Disabled Disabled RE D
4. Limited DynaMO 2300U2 User s Manual 3 5 Emergency Eject Important Never use emergency eject while your DynaMO is on 1 Remove all cables from your DynaMO 2 Straighten one end of a large paper clip 3 Insert the straightened end of the paper clip into the eject hole and push gently but firmly until the MO disk is ejected Eject Hole 3 6 Write Protection Enabling write protection on the MO disk prevents data from being accidentally lost or altered The write protect switch is located on the bottom of the MO disk see the figure below Move the write protect switch up for write enable or down for write protect Ost ae Write enable Write Protect 12 Copyright 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 3 7 Cleaning the MO Disk From time to time dust may build up on the surface of the disk making it necessary to clean If your MO disk appears dirty use the MO disk cleaning kit part number CA90003 0702 we offer or any MO disk cleaning kit on the market 3 8 Cleaning Your Drive In normal office environments cleaning your DynaMO drive is not required In some cases however dust may build up on the objective lens of the drive and cleaning may be required To clean the objective lens insert the optional head cleaner part number CA90002 C980 Cleaning will take place automatically and the head cleaner will be ejected after 15 30 seconds Please contact your
5. Power Indicator RUBBER 2 Protrusions 1 3 3 Inserting an MO Disk Gently insert the MO disk with the label side up as shown below until the disk clicks into place The busy indicator comes on when the MO disk is loaded Wait for the busy indicator to go off before using the disk A 1 3 2 3 GB MO disk takes a little longer to become ready after it is inserted Important Never force the disk into the drive or insert an MO disk upside down since this may damage the drive Since a floppy disk is about the same size as an MO disk never insert a floppy disk into your DynaMO 10 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual Do not insert foreign objects into the DynaMO Before using the drive connect the AC adapter to the drive and turn on the power The drive s shipping lock will be released Notice If an MO disk has not been inserted properly push the eject button and then try to insert the disk again 3 4 Ejecting an MO Disk Right click the removable disk icon and select Eject from the pop up menu If the MO disk cannot be ejected properly as described above or appears to be jammed in the drive the disk can be ejected using Emergency Eject Important for Windows 2000 users When the MO disk cannot be ejected see Chapter 3 11 for Windows XP users When the MO disk cannot be ejected see Chapter 3 11 11 Copyright O 2002 Fujitsu
6. on the same bus might disturb the operation of such playback devices and cause jerky playback When you choose to position the DynaMO vertically on its narrow side never allow it to fall to the wide side If does this will seriously damage the DynaMO also making the guarantee void 22 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 4 2 Software Notes Important Use only the device driver provided by Fujitsu with this drive Do not use the Copy Disk command Do not remove the MO drive or turn off the power of the MO drive or remove the MO disk from the drive while a file is being accessed or a disk is being formatted Do not shut down the OS or place the system in standby or suspend mode while a file is being accessed or a disk is being formatted 43 Q amp A Although the DynaMO is designed to be highly reliable you may occasionally experience problems This section describes problems you could encounter when using your DynaMO If you experience any problems other than those outlined below contact your dealer or Fujitsu subsidiary QI The PC hangs Al Be sure not to connect or disconnect a USB cable while the Busy Indicator of the DynaMO is on Install the Fujitsu device drivers f an error occurs during system startup disconnect the DynaMO then restart the system and reconnect the DynaMO Q2 Iconnected the DynaMO but the removable disk icon does not appear
7. Disk icon corresponding to the DynaMO and select Format 14 Copyright 2002 Fujitsu Limited DynaMO 2300U2 User s Manual Las My Computer lal xl File Edit View Favorites Tools Help Bak gt search GyFolders lt Bristory Ax Or X aA Eg address Emcor e Ses 314 Floppy LocalDisk C Compact Disc REMEE My Computer A p Disk E Open Removable Disk E ad 3 Explore Removable Disk Search Control Panel Sharing Capacity 605 MB em E used 26 9 MB Eject CO Free 579 MB Create Shortcut Rename Properties Formats the selected drive 3 Set the required items in the dialog box and click the Start button for Windows XP users Important When you format an MO disk with non administrator privilege see Change eject and format privilege 1 Open My Computer from Start button 2 Right click the Removable Disk icon corresponding to the DynaMO and select Format 15 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual P My Computer File Edit View Favorites Tools Help Q Bad E po Search lie Folders AA P My Computer Files Stored on This Computer System Tasks B View system information cJ Shared Documents cJ Win XP Pro e s Documents D Add or remove programs G Change a setting Eject this disk Hard Disk Drives Other Places A ue WIN XP P E C ue COM D My Network Places a My Documents D
8. English you can use the DynaMO in a non English environment without any problems 1 Place the DynaMO CD in the CD ROM drive 2 From Explorer open the CD ROM drive and double click the following icon Follow the displayed instructions per CD ROM Drive Win2000 MOSUPPLE MSI 3 Restart your PC for Windows XP users Notice Logon with administrator privilege Although some installer messages are displayed in English you can use the DynaMO in a non English environment without any problems Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual Place the DynaMO CD in the CD ROM drive From Explorer open the CD ROM drive and double click the following icon Follow the l j Gi IMOUTYMSE displayed instructions CD ROM Drive WinXP MOUTY MSI From Explorer open the CD ROM drive and double click the following icon Follow the displayed instructions CD ROM Drive WinXP MOSUPPLE MSI Restart your PC 2 2 Uninstalling Software for Windows 98 Windows 98 Second Edition and Windows Me users Click the Start button 2 Select Settings and click Control Panel 3 Double click Add Remove Programs 4 Select MO Supplement 5 Click Add Remove to uninstall for Windows 2000 users 1 Click the Start button 2 Select Settings and click Control Panel 3 Double click Add Remove Programs 4 Select Change or Remove Programs 5 Select MO Supplement 6 Click Remove to
9. GIGAMO Disk type Sector size bytes sector 1 3 GB 2048 2 3 GB 2048 5 5 What Is a Direct Over Write DOW MO disk A standard MO disk requires three rotations of the disk to record data erase write and verify DOW disks allow your DynaMO to reduce the number of the rotations to two write and verify Eliminating one rotation improves the recording speed by 30 DOW disks are only available in 540 MB and 640 MB capacities 26 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 6 Further Information 6 4 Fujitsu Subsidiaries For further information about Fujitsu products or customer support please contact your local dealer or one of the following Fujitsu subsidiaries Country Phone Web site Australia 61 2 9776 4555 http www fujitsu com au Canada 1 905 602 5454 http www fujitsu ca France 33 1 41 80 38 80 http www fujitsu europe com Germany 49 89 32 378 0 http www fujitsu europe com U K 44 20 8606 4444 http www fujitsu europe com Italy 39 26294 1 http www fujitsu europe com Korea 82 2 3787 6000 http www fujitsu co kr Philippines 63 2 812 4001 Singapore 65 777 6577 http www fujitsu computers com sg Spain 34 91 784 9000 http www mo fujitsu es Sweden 46 8 626 4500 http www fujitsu europe com Taiwan 886 2 2545 7700 http www fujitsu com tw Thailand 66 2 512 6066 U S A 1 408 432 6333 http www fcpa com http
10. MOstorage com Brazil 55 11 245 0880 http www fujitsu com br The following web site also contains the related information http mo fujitsu com global SIT Copyright 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 6 2 Copyright and Trademarks Copyright O 2002 FUJITSU LIMITED This document and all materials contained herein are subject to copyright The document may not be copied in whole or in part without the written consent of FUJITSU LIMITED Fujitsu Fujitsu logo and DynaMO are trademarks of FUJITSU LIMITED Japan GIGAMO is a trademark Microsoft Windows Windows 2000 Windows XP Windows 98 and Windows Millennium Edition are trademarks of Microsoft Corporation registered in the United States and other countries The USB logo is a trademark of Universal Serial Bus Implementers Forum Inc USB IF All other companies and product names mentioned in this document are trademarks or registered trademarks of their respective companies The specifications may be changed without notification 28 Copyright O 2002 Fujitsu Limited
11. On line User s Manual for DynaMO 2300U2 English January 28 2002 Copyright O AII Rights Reserved 2002 FUJITSU LIMITED C156 E208 04XA DynaMO 2300U2 User s Manual i ARA a A ETE D 1 1 System Requirements 2 1 2 Getting Started S 3 V3 Ii Hd 3 1 4 Help information 3 2a Installati n rosovio ss 2 1 Installing the software 4 2 2 Uninstalling Software sccsccssssscssssrsesssssececsssscssssseseesensesssnessessensessessesessonsesssscesessonsessesessessonsecsssessessonsees 6 3 Using your DynaMO KNEE uauiudv 3 2 How to set up the DynaMO in an upright position eere esee ee ener eene tenta sns tn setas tenens tnun 10 3 3 Inserting pasen 10 3 4 Ejecting pc aunmU H 11 3 5 Emergency Ulis 12 3 6 jdidugui sese 12 3 7 Cleaning the Go 13 Umeriiuiuauidu 13 3 9 Formatting an MO o
12. e USB bus we recommend that O youclose all applications that are using the MO disk or files on the MO disk O you eject the MO disk from the DynaMO Never transport your DynaMO with an MO disk loaded since this may damage the drive 3 11 Changing eject and format privilege for Windows 2000 users As the default setting of Windows 2000 only the administrator is allowed to eject or format MO disks If you want to allow all users to be able to eject and format MO disks change the local security policy settings zy Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 1 Logon with administrator privilege 2 Click Start Settings Control Panel to open the Control Panel 3 Double click Local Security Policy in Administrative Tools 3 Administrative Tools File Edit View Favorites Tools Help Bak Ey Search yrolders CBristory DX O3 X A Ed Address ja Administrative Tools gt Go w Gi La Component Administrative Services Tools Local Security Policy Shortcut View and modify local security policy such as user rights and audit policies Modified 12 8 2000 10 27 AM Size 1 40 KB Attributes normal Computer Management d Performance Data Sources Event Viewer ODBC b a Services Telnet Server Administration View and modify local security policy such as user rights anc n 40 KB a My Computer Z 18 Copyright O
13. evices with Removable Storage Shared Documents e Control Panel H 314 Floppy A xA Optical Drive E Open Details d Explore L CD Drive F Search Optical Drive E Removable Disk AutoPlay Format Eject Cut Copy Create Shortcut Rename Properties 3 Set the required items in the dialog box and click the Start button 3 10 Removing your DynaMO To remove the DynaMO use the procedure below Important Ifthe icon shown in the figure below is on the task bar follow the procedure below If it is not skip steps 4 to 6 of the procedure 1 Close all applications that are using the MO disk or open files on the MO disk 2 Make sure that the Busy Indicator is off 3 Eject the MO disk from the DynaMO 16 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 4 Click the Unplug or Eject Hardware icon on the taskbar BS 1 30 PM 5 Stop the DynaMO From the list of devices select your DynaMO to stop Stop FUJITSU MDG3130UB Drive E The Removable Disk icon disappears 6 The Safe To Remove Hardware dialog box opens Click OK You can now safely remove your DynaMO 7 Disconnect USB cable from the system 8 Turn off the power switch 9 Disconnect the AC adapter from the power outlet 10 Disconnect the AC adapter from your DynaMO Important Never disconnect the USB cable while the busy indicator is on Before removing the DynaMO from th
14. ht O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 2 Installation 2 1 Installing the software Before you install the software you should save your work and quit any open programs for Windows 98 Windows 98 Second Edition users Setup Installation Notice Do not connect the USB cable before installing software Ifthe hardware wizard has started click Cancel to close it Although some installer messages are displayed in English you can use the DynaMO in a non English environment without any problems 1 Place the DynaMO CD in the CD ROM drive 2 From Explorer open the CD ROM drive and double click the following icon Follow the displayed instructions CD ROM Drive Win9x Setup exe 3 Restart your PC for Windows Millennium Edition users Notice Do not connect the USB cable first Ifthe hardware wizard has started click Cancel to end it Although some installer messages are displayed in English you can use the DynaMO in a non English environment without any problems Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 1 Place the DynaMO CD in the CD ROM drive 2 From Explorer open the CD ROM drive and double click the following icon Follow the displayed instructions CD ROM Drive Win9x Setup exe 3 Restart your PC for Windows 2000 users Notice Logon with administrator privilege Although some installer messages are displayed in
15. isable CTRL ALT DEL requirement For logon Not defined Not defined RE Do not display last user name in logon screen Disabled Disabled RS LAN Manager Authentication Level SendLM amp N Send LM amp NTLM re aS Message text for users attempting to log on Re Message title For users attempting to log on RE Number of previous logons to cache in cas 10 logons 10 logons RS Prevent system maintenance of computer a Disabled Disabled laS Prevent users from installina printer drivers Disabled Disabled d ls 5 The following dialog box opens Select Administrators and Interactive Users under Local policy setting and press OK Local Security Policy Setting 2 xi Allowed to eject removable NTFS media Effective policy setting Administrators Local policy setting Administrators Ne Administrators Administrators and Power Users Administrators and Interactive Users 19 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual for Windows XP users As the default setting of Windows XP only the administrator is allowed to eject or format MO disks If you want to allow all users to be able to eject and format MO disks change the local security policy settings 1 Start the Eject and format privilege 2 Select an account enabling MO disks to be formatted or ejected from Group To enable only computer administrators to format or eject MO disks click the Computer Administrators radio bu
16. ks 2 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual Never force the disk into the drive or insert an MO disk upside down since this may damage the drive Since a floppy disk is about the same size as an MO disk be careful never to insert a floppy disk into the DynaMO Do not insert foreign objects into DynaMO Do not use your DynaMO in areas where dust dirt extreme temperatures or moisture is present Always use the stand when you use the DynaMO in an upright position Only use the AC adapter for the DynaMO Ux series delivered with the product FUJITSU CA05955 3411 Usea USB cable having the following model number FUJITSU CA05955 3403 No operation warranty applies to connections to USB Keyboard Do nottouch the MO disk while it is in use If your DynaMO does not operate properly while connected via a USB hub try connecting it using the USB port on your personal computer Disconnect and then re connect the USB cable in the following situations O the DynaMO drive icon does not appear on the screen after you connect your DynaMO to your personal computer or O the DynaMO drive icon does not re appear after your PC resumes operation from the standby state Do not disconnect or connect your USB cable while drive is operating Using a USB device such as your DynaMO while music and or motion pictures are being played back real time playback by another USB device
17. manufacture of your PC to verify the USB port 24 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 5 Specifications 5 1 Drive Specifications DynaMO 2300U2 Drive MDG3230UB Interface USB 2 0 Data transfer rate 1 65 MB s 128 MB Drive 2 00 3 16 MB s 230 MB 3 54 5 94 MB s 540 MB 3 52 5 87 MB s 640 MB 3 92 6 70 MB s 1 3 GB GIGAMO 4 69 8 38 MB s 2 3 GB GIGAMO Data transfer rate Interface 480 Mbps USB 2 0 Average seek time 19 ms typ Average latency time 5 5 ms ISO standard MO disks 8 2 ms GIGAMO disks Rotational speed 5455 rpm ISO standard MO disks 3637 rpm GIGAMO disks Buffer 7 6 MB Input power 100 240 VAC 50 60 Hz Dimensions 122 mm W x 162 mm D x 34 mm H Power Consumption 15 W max Operating Weight Drive 630g Temperature 5 35 C In Operation Temperature 0 50 C Not in Operation 5 2 MO Disks Only 3 5 MO disks that comply with ISO or GIGAMO standards can be used for the DynaMO The following is a list of 3 5 MO disk capacities These 3 5 MO disks are manufactured and distributed by several manufacturers 25 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 5 3 ISO standard Disk type Sector size bytes sector 128 MB 512 230 MB 512 540 MB 512 540 MB OW 512 640 MB 2048 640 MB OW 2048 5 4
18. ou have all the components printed on the packaging box If any components are missing please contact your reseller Notice See Chapter 5 to get safety information about this product Before using DynaMO see also Getting Started 1 4 System Requirements PC CD ROM Drive Required to install the device driver USB 1 1 compliant system or USB 2 0 compliant system Operating System Microsoft Windows 98 Microsoft Windows 98 Second Edition Microsoft Windows Millennium Edition Microsoft Windows 2000 Professional Microsoft Windows XP Home Edition Professional Windows XP 64 Bit Edition is not supported Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 1 2 Getting started Installing your DynaMO is fast and easy Please refer to the following instructions to set up your DynaMO and install the appropriate software 1 Install the DynaMO software for your operating system Refer to Chapter 3 1 for details 2 Connect the DynaMO drive to your PC Refer to Chapter 3 1 for details 3 Using your MO drive is as easy as using a floppy disk drive Refer to Chapter 3 for details about using the MO drive 4 Formatting MO disks Refer to Chapter 3 9 for details about the MO disk format 1 3 Helpful Notes Refer to Chapter 4 1 and Chapter 4 2 for additional information about your DynaMO 1 4 Help information Refer to Chapter 4 3 if you need help while using the DynaMO Copyrig
19. place of purchase for information on the DynaMO lens cleaning kit 3 9 Formatting an MO Disk Most new MO disks are not formatted If your MO disk is not formatted you will need to format it before you can use it Important Formatting will delete all existing data on the MO disk 13 Copyright 2002 Fujitsu Limited DynaMO 2300U2 User s Manual for Windows 98 Windows 98 Second Edition and Windows Millennium Edition users 1 Close any open program which may access your DynaMO 2 Insert the MO disk then run the MO Disk Formatter The following dialog box will appear E MO Disk Formatter e xi File Help r Select an MO drive FUJITSU WMCJ3236UB Format Type Disk is not ready Sector Size Capacity r Select a Format Type Floppy Type FAT16 E Low Level Format r Volume Label e 3 Select the DynaMO 2300U2 in the Select an MO drive list box 4 Select an appropriate format type in the Select a Format Type combo box Type an arbitrary volume label in the Volume label edit box Use only English alphabet A Z and or numeric number 0 9 and or underscore _ 6 Press the Start button to continue formatting Confirm the message and click OK Formatting will start for Windows 2000 users Important When you format an MO disk with non administrator privilege see Chapter 3 11 1 Open My Computer 2 Right click the Removable
20. tton 3 Click the Apply button 4 To change the privilege all users who are currently logged on to Windows must log off 20 Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 4 Notes This Product is designed developed and manufactured for general use and is suitable without limitation for use in general office environments for personal use and for household use It is NOT designed developed and manufactured for use in environments bearing extremely high risk potentials like fatal risks or dangers which require extremely high safety measures and which could otherwise lead to death personal injury severe physical damage or other similar losses hereinafter called Use in High Safety Environments Such environments include without limitations the nuclear power core control airplane control air traffic control mass transport operation control life support and weapon launching control You should NEVER use this product without making sure that all necessary safety measures have been sufficiently taken to comply with the necessary requirements for its Use in High Safety Environments 4 1 Hardware Notes Important Always make sure that the Busy Indicator is off before ejecting an MO disk Eject the MO disk before moving your DynaMO Never disassemble the DynaMO under any circumstances Do not drop or turn over the DynaMO Avoid any physical shoc
21. uninstall Copyright 2002 Fujitsu Limited DynaMO 2300U2 User s Manual for Windows XP users 1 Click the Start button Click Control Panel Double click Add Remove Programs Select Change or Remove Programs Select MO Utilities for XP Click Remove to uninstall Select MO Supplement for XP 9e mE Oy SUY dO CES Click Remove to uninstall Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 3 Using your DynaMO 3 1 Connecting your DynaMO Notice For PLUGGABLE EQUIPMENT the socket outlet shall be installed near the equipment and shall be easily accessible 1 Connect the AC adapter to your DynaMO 2 Connect the AC adapter to the power outlet 3 Turn on the power switch Make sure that the Power Indicator lights Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 5 Connect the other end of the USB cable to the PC Copyright O 2002 Fujitsu Limited DynaMO 2300U2 User s Manual 3 2 How to set up the DynaMO in an upright position Important You can use the DynaMO in an upright position Be sure to use the stand provided with the DynaMO When using the stand for mounting the DynaMO orient the stand with the protrusions 1 facing the front and place the DynaMO on the stand such that the RUBBER 2 attached to the stand faces the DynaMO side with the logo label affixed to it
22. y to eject the disk Power off the drive and use emergency eject You may reboot the system and try to eject the disk again Q5 I cannot eject or format an MO disk with user priviledge in Windows 2000 or Windows XP A5 With the standard OS settings the MO disk cannot be ejected or formatted without administrator privilege To eject or format an MO disk with user priviledge enable the setting as explained at Changing eject and format privilege Note If the OS is not rebooted the new setting may not take effect If they do not take effect reboot the OS Q6 I can t access an MO disk formatted for NTFS in Windows 2000 A6 The disk may be write protected Q7 Ipressed the eject button but the MO disk was not ejected from the MO drive A7 An MO disk formatted for NTFS cannot be ejected by pressing the MO drive s eject button Select the eject option from the pop up menu displayed by right clicking the MO drive icon Q8 The MO disk is formatted for NTFS with user rights but I can t access it with user rights A8 Windows 2000 SP2 solves this limitation Or make sure you format NTFS with administrator privilege Q9 I can t use an MO disk formatted for NTFS in Windows 2000 or WindowsNT 4 0 A9 This happens because of an OS specification Q10 My DynaMO 2300U2 appears to be slow transferring data A10 The DynaMO may be connected to USB1 1 port instead of USB2 0 port USB1 1 connection is slower than USB2 0 Consult the
Download Pdf Manuals
Related Search