Lift-Tool - Southworth Products Co.
Contents
1. Operation Before using the device the operator shall have e Read and or had explained and understood the manufacturer s operating instructions and safety rules e Inspected the device for proper operation and condition Any suspect item shall be care fully examined and a determination made by a qualified person as to whether it con stitutes a hazard All items not in conformance with Southworth s specification shall be corrected before further use of the equipment During Operation The device shall only be used in accordance with this owner s manual e Do not overload e Ensure that all safety devices are operational and in place Modifications or Alterations Modifications or alterations to any Southworth industrial positioning equipment shall be made only with written permission from Southworth LIFT TOOL OWNER S MANUAL SAFETY ALERT SYMBOLS AND SIGNAL WORDS The safety of all persons operating maintaining repairing or in the vicinity of this equipment is of para mount concern This is a powerful machine with moving parts and is capable of causing personal injury if proper precautions are not taken Therefore throughout this manual certain hazards have been iden tified which may occur in the use of the machine and there are appropriate instructions or precautions which should be taken to avoid these hazards In some cases there are consequences which may occur if instructions or precautions are not followed Belo2. SOUTHWORTH a Lift Tool Part Number 4429108 Owner s Manual Serial Placed in Service October 2014 2 OWNER S MANUAL CONTENTS INTRODUCTION nissin RESPONSIBILITY OF OWNERS AND USERG SAFETY ALERT SYMBOLS AND SIGNAL WORDS Sieg ee ee E INSPECTION OPERATING INSTRUCTIONS CARE AND MAINTENANCE 0 eeeeeeeeeeeeeees REPLACEMENT PARTS sasnsactaxcoctseasdalesarumcaneiarteceane TROUBLESHOOTING aca oreeecgesseceoeaeatenesentineeaaesten LIFT TOOL OWNER S MANUAL INTRODUCTION In the interest of safety please read this whole manual carefully Be familiar with the contents of this manual before you set up or use the Lift Tool If you are not sure of the proper procedure to be followed please call Customer Service at 1 800 743 1000 For your safety please read understand and follow the information contained within before use The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use Instructions and safety information shall be conveyed in the operator s native language before use is authorized Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product If any doubt exists as to the safe and proper use of this device as outlined in this factory authorized manual remove the lift from service until safe and proper use is clearly understo
3. d on lift plate Be sure to cen ter the load 2 Install 4 hex key into drill motor s chuck and tighten hex key not supplied 3 Install hex key into lifts height adjustment screw and start drill motor Note direction of lift and if lift is moving in opposite direction reverse drill motor s rotation and continue raising load 4 Only after centering and leveling the load slowly and carefully raise the lift by the drill motor 5 To lower lift reverse rotation of drill motor and carefully and slowly lower lift to lowest position DO NOT move or pry on the lift in the raised position CARE AND MAINTENANCE Note When lift is not in use lifting arms should be stored in the fully retracted position Keep lift clean and well lubricated MAINTENANCE e Keep the area around the unit clean Do not allow any dirt debris or spillage to collect These materials may damage the lift mecha nism or may become entangled in the lifting mechanism e Check for broken or cracked components Remove from service or repair immediately EVERY 25 CYCLES e Check for loose hardware and signs of excessive wear e Wipe any dirt or debris from screw and nut s assemblies Clean areas where leg slider blocks travel e Lubricate screw with white lithium grease only Do Not Use Oil e Leg slider blocks do not require any lubrication LIFT TOOL OWNER S MANUAL 7 8 OWNER S MANUAL REPLACEMENT PARTS Not all compo
4. is device Do not exceed rated capacity Ensure load is compatible with Lift Tool s platform Center load on platform Move loaded lift only over smooth level seamless surfaces Before moving ensure load has been low ered completely Slide loaded lift only on hard level surfaces capable of sustaining rated capacity loads Lift only on area of the load as specified by it s manufacturer Do not alter this product in any way Do not use this product for any purpose other than that for which this device is intended Failure to heed these messages may result in personal injury and or property damage Please read understand and follow this user s manual including all safety instructions and precautions 6 LIFT TOOL OWNER S MANUAL INSPECTION Do not use if cracked broken bent or otherwise damaged parts are noted or if the lift is suspected to have been damage during shipping Any lift that appears to be damaged in any way is worn or operates abnormally shall be removed from ser vice immediately until such time as repairs can be made Do not attempt to weld rivet or otherwise repair this device DO NOT modify or alter this de vise It is recommended that an annual inspection be done to this devise by qualified persons and that missing or damaged parts or labels warning safety decals be replaced with new ones that are factory authorized OPERATING INSTRUCTIONS 1 Position lift under appropriate lift points centering loa
5. nents of the lift are separate replacement items Illustration shows all parts as a conve nient reference of location and position in the assembly sequence Call 1 800 743 1000 for current pricing Part No 1 A 4 B 5 B 6 B 9 B Part Descriptions Cart Frame assembly Includes all frame members 4 wheels and 4 hold down brackets assemblies Top Plastic Covers Top Aluminum Pan with Slots Aluminum Cross Scissor Assy Includes Inside and outside scissor weldments bearings and plastic pivot blocks Steel Scissor Jack Assy Includes clamp yokes toggle links pivot pins amp screw as sembly Bottom Aluminum Pan Assy Includes aluminum pan and shaft slider block Bottom Plastic Covers Safety Labels LIFT TOOL OWNER S MANUAL TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION WILL NOT LIFT LOAD Battery low on portable drill Recharge battery Load too heavy for lift Reduce load Drill rotating in wrong direction Reverse drill rotation Scissor jack bent or broken Purchase new scissor jack Scissor jack nuts sieged Purchase new scissor jack WILL NOT LOWER Battery low on portable drill Recharge battery LOAD Drill rotating in wrong direction Reverse drill rotation Scissor jack bent or broken Purchase new scissor jack Scissor jack nuts sieged Purchase new scissor jack LOAD RAISES AND Battery low on portable drill Recharge battery LOWERS BUT Load too heavy for lift Reduce load weight PORTABLE DRILL IS Scis
6. od This lift is specifically designed to lift and support up to rated capacity for loads consisting of a frame that is compatible with the lifting member of the Lift Tool Incompatibility is evident when the load wobbles feels unstable and or does not securely set on the lifts top or bottom pans Tying down incompatible loads will not make the load secure and may cause unexpected loss of load resulting in personal injury and or property damage These lifts are not suitable for lifting humans animals lifting or leveling and or positioning houses construction trailers automobiles and dwellings in general This product does not contain independent lifting devices but is designed to be permanently assembled LIFT TOOL OWNER S MANUAL 3 4 OWNER S MANUAL Responsibility of Owners and Users Inspection and Maintenance The device shall be inspected and maintained in proper working order in accordance with Southworth s owner s manual Removal from Service Any device not in safe operating condition such as but not limited to excessive leakage miss ing rollers pins or fasteners any bent or cracked structural members cut or frayed electric or hydraulic lines damaged or malfunctioning controls or safety devices etc shall be removed from service until it is repaired to the original manufacturer s standards Repairs All repairs shall be made by qualified personnel in conformance with Southworth s instructions Before
7. sors jack or legs bent Purchase new scissors or LABORING legs Screw is dry Lubricate with white lithium grease Southworth Products Corp P O Box 1380 Portland ME 04104 1380 Telephone 207 878 0700 Fax 207 317 4317 www southworthProducts com LIFT TOOL OWNER S MANUAL 9 SOUTHWORTH making work faster safer and easier Southworth is the world class supplier of products designed to improve productivity and enhance safety Our staff has over 400 years of engineering experience If one of our standard products does not meet your needs our engineers can custom design equipment specifically suited to your material handling application Lift with Flush Mount Turntable Portable Container Tilters Roll on Level Loaders Portable Lifts z xsOftxz4coOMw Floor to Floor Height Lifts Mezzanine Lifts Stack n Go Powered Stacker Roll E BA Pallet Rotators For more information contact Southworth Products Telephone 800 743 1000 Fax 207 797 4734 Email salesinfo SouthworthProducts com
8. w are the symbols and signal words along with their definitions referenced from ANSI 2535 4 Product Safety Signs and Labels Safety Alert Symbols These are the safety alert symbols They are used to alert you to potential physical injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death For use with DANGER signal word Red Background For use with WARNING signal word Orange Background For use with CAUTION signal word Yellow Background Signal Words The meaning of different signal words as defined by ANSI Standard 2535 4 indicates the relative seriousness of the hazardous situation DANGER indicates a hazardous situation which if not A DANGER avoided will result in death or serious injury Red Background WARNING indicates a hazardous situation which if not avoided could result in death or serious injury Orange Background Yellow Background NOTICE is used to address practices not related to per N OTI E sonal injury Blue Background SAFETY SAFETY INSTRUCTIONS or equivalent signs indicate INSTRUCTIONS safety related instructions or procedures CAUTION used with the safety alert symbol indicates a hazardous situation which if not avoided could result in minor or moderate injury Green Background LIFT TOOL OWNER S MANUAL 5 OWNER S MANUAL SAFETY Study understand and follow all printed materials provided with and on th
Download Pdf Manuals
Related Search