SI`EII18H IESOLUTIOIelLIUI e11E11 - E
Contents
1. USER S MANUAL Thanks for purchasing our product Before operating the unit please read the instructions carefully and keep this manual for future refe rence Table of Contents 1 Introduction 1 2 FeatureS 1 3 Cautions 2 4 InstallationgAuto Iris connector 3 5 K y 6 6 Menu Functions 6 Caution The Super High Resolution Colour Camera adopt advanced Digital Signal Processor DSP technology which enhances picture to high carefully quality and high resolution greatly provides great function and more 2 Precision components are contained in the camera so please vivid image avoid violent vibration during the course of transit maintenance a and installation For the sake of safety please do not connect to 1 Before installing and operating the unit please read the manual MAA oe power before installation completion y 3 Please abide by all the electric codes when using the unit 1 Adopt 1 3 SONY Super HAD CCD 4 Do not use corrosive or abrasive detergent for cleaning 2 540 TVL Super High Horizontal Resolution Use lens paper or cotton stick with alcohol to clean the sensor 3 OSD menu programmable set board 4 Minimum illumination 0 3Lux F1 22. circumstance PAL for 60Hz NTSC for 50Hz flicker will apear To avoid this need modify the electronic shutter to 1 120s for PAL 1 100s for NTSC While setting the electronic shutter mode please be sure FLICKLESS OFF AE camera will adjust automatically to get the best blooming effect during the stable range 1 50s 1 100 000s for PAL 1 60s 100 000s for NTSC lbs Al while using auto iris lens set Al ON electronic shutter will be 1 50s for PAL 1 60s for NTSC AE SHUTTER set the camera s stable electronic shutter 1 50s 1 120s 1 100s 1 250s 1 500s 1 1000s 1 2000s 1 4000s 1 10Ks 1 100Ks optional MANUAL under the Manual mode electronic shutter and gain control can be set same time 1 50s 1 120s 1 100s 1 250s 1 500s 1 1000s 1 2000s 1 4000s 1 10Ks 1 100Ks optional for electronic shutter 5dB 13dB 22dB 30dB optional for gain Select this will restore the factory default value Select INITIAL press left or right key to restore the factory default value then reset 1 3 SONY Super HAD CCD 752 582 PAL 768X494 NTSC S40TVL 0 3Lux F1 2 Minimum illumination 0 08Lux F1 2 With IR cut filter Removal Only Day Night model gt 50dB Shater PAL 1 50 1 100 000s NTSC 1 60 1 100 000s Weigh 5009 On screen dispaly OSD 15 V 580C W E 071113B
3. colour mode 5 Under no circumstances to direct the camera to the sunlight or 0 08Lux F1 2 B W mode strong light sources in order to avoid any damage to the lens and 5 Automatically change between colour mode and B W mode sensor according to the light inputting Only the IR Cut filter removal 6 Do not use the camera in situations beyond the rated operating Day Night Camera temperature 10 C 50 C humidity less 95 or power source 6 Built in function 7 In times of malfunction do not attempt to dismantle and service a Mirror function i the camera by yourself Please refer to qualified serving person b Back light compensation mode nel to repair or contract our technical department to solve the c Dynamic period max 50dB problems d 8 mask areas e Auto and Manual White Balance Warning Prohibit the products to be rained or wet in case of f Auto and Fixed Electronic Shutter g Auto and Fixed Gain Control h Electronic sensitivity extendible function i Anti color rolling function j Flickerless function fire or getting an electric shock 1 VIDEO composite vidio signal output the resolution of recom mend monitor must be over 600TVL 2 LED power indicator 3 IRIS Switch DC for DC iris lens Video for video iris lens al 4 Figure Auto iris connector Jack du Figure Auto iris connector Jack Pin Videoirislens DEirislens E 2 It will get better image quality to adjust the i
4. k first means the electronic shutter will adjust automatically and gain only works when the shutter enhanced to 1 50s the period of gain is between 0 30dB Set ON the gain work first means the gain will adjust automatically period is between 000 255 default value is 40 and the electronic shutter will be 1 50s AREA MODE total is 5 reference areas AREA3 AREA AREA4 AREA2 CENTER LOWER 1 3 CENTER LEFT CENTER RIGHT UPPER 1 3 If choose the CENTER as the reference area means the average light in the AREA1 will be the standard Setup way set the CENTER ON then set the dynamic period of the other four areas on UNWEIGHTED LEVEL the dynamic range is between 000 015 000 is minimum 015 is the maximal 50dB Enter the DAY AND NIGHT modo set Only the IR Cut filter removal Day Night Camera DAY AND NIGHT DAY AND NIGHT AUTO DAY TO NIGHT VALUE 212 NIGHT TO DAY VALUE 170 EXIT PRESS MENU KEY DAY AND NIGHT MODE SET aitama trigger Mode optional For external trigger details refer to page 4 5 Auto Mode Day to Night switch to Night mode while gain higher than the set value day to night value can be set from195 to 230 based on reguirements 212by default gn Night to Day switch to Night mode while gain lower than the set value night to day value can be set from 155 to 185 8 mask areas can be set at most step if want to set the first mask based on requirements 170 by default area
5. ris on the back board while connecting to the DC iris lens 4 Power input connector a AC24V 16 30V connect the power cable to AC DC compatible interface on back board of camera be sure the ground interface is well connected to the system b DC12V 9 1 20V connect the power cable to AC DC compatible interface on back board of camera be sure that the positive and negative of power is matched with the signal C Main voltage input 90 240VAC 5 1 0 port Only the IR Cut filter removal Day Night Camera 1 RS232TX Option Black 2 RX232 Rx Option Brown 3 RS232GND Orange 4 NC Blue 5 NC Green 6 GND Yellow 7 Externalr trigger input White 8 5V Red Ais I O port function RS232 is connect to Rs232 interface of PC Option 1 Second PIN of RS232serial port Option 2 Third PIN of Rs232serial port Option 3 RS232 GND 4 NC null unused 5 NC null unused 6 GND 7 External trigger external trigger change Day Night mode set DAY AND NIGHT as EXT external trigger mode low level effective connectto PIN6 Yellow effective 8 5V power 8 Center selection button to enter a menu or exit the menu O Move the icon vertically between the menus and options Press the two keys to move the icon horizontally between the menus and options or enter submenus MAIN MENU GENERAL BACKLIGHT DAY AND NIGHT PRIVACY WBC MODE AE MODE INITIAL EXIT PRESS MENU KEY HI RESOLUTION defaul
6. set the MASK NUMBER 001 set the MASK SET ON recover Auto Mode auto day night switch IR Cut filter Color at the masked area completely by changing the four frames select the day and change to B W _ shown color for the masked area Lock Grey White Black Red Day mode turn off day night switch won t removing IR Cut filter Orange Yellow Green Blue Purple etc optional Day Night mode removing IR Cut filter in night switch to night mode Same setting the next areas high guality B W picture External trigger removing Day Night IR Cut filter according to external trigger signal Note only Day Night Mode camera will be induct IR and improve the night effect by removing IR Cut filter Do not too close to object incase ofinfrared light Orit may cause to removing IR Cut filter over and over again Therefore choose the suitable infrared light and adjust suitable angle according to environment in using Enter the WBC MODE menu by left or right key to set the white balance E WBC MODE SET Enter the menu PRIVACY through the left or right key to set the mask ANTI COLOR ROLLING mode AUTO TRACE WB PUSH MASK SET INDOOR MASK NUMBER lt 1 8 gt FLUORESCENT LIGHT MASK SET f OUTDOOR H START POSITION MANUAL WB H END POSITION EXIT PRESS MENU KEY V START POSITION V END POSITION MASK COLOR HOLD EXIT PRESS MENU KEY a De ANTI COLOR ROLLING Ifthe AC freguency is not stable or different too much for e
7. t is ON the resolution will be540TVL it will be effective after restart while change setting SHARPNESS set ON image will be crisper has three grades Low Middle High default is OFF Select GENERAL SET on the main menu press left or right key to enter GENERAL MENU for normal mode setup COLOR SUPPRESS default is OFF while it is ON the image will change into B W on low light to enhance idetification of the images GENERAL gt CAMERA ID OFF COLOR ON MIRROR OFF HI RESOLUTION ON SHARPNESS OFF kg ml alalt A ra Enter the BACKLIGHT MODE SET menu through left or right key to EXIT PRESS MENU KEY set the backlight compensation mode APERTURE SUPPRESS default is OFF set ON the overlap of fine articles on low light can be reduced BACKLIGHT MODE SET BACKLIGHT MODE OFF EXIT PRESS MENU KEY AE MODE MUST BE AE CAMERA ID set camera No 000 255 through left and right key under Camera ID the No will be shown on the right top coner default is OFF a COLOR set OFF while AGC works image will be changed into BIW Remember to set the AE MODE ON while setting the backlight mode to remove the splash which will appear with low light default is ON MIRROR default is OFF A B BACKLIGHT MODE SET BACKLIGHT MODE SET BACKLIGHT MODE SENS BACKLIGHT MODE AREA i lt x0 x4 gt 040 UNWEIGHTED LEVEL 000 IT PRESS MENU KE EXIT PRESS MENU KEY AE MODE MUST BE AE AE MODE MUST BE AE Set SENS OFF the shutter wor
8. xample the electricity frequency is less 49 9Hz the serious color rolling will appear set the anti color rolling ON will remove or ease color rolling Please be sure to set the ANTI COLOR ROLLING OFF while setting the white balance mode AUTO TRACE WB camera will inspect color temperature continuously and adjust white balance automatically while color temperature is around 2 600 6 000K The mode is the first chosen mode PUSH while the color temperature is around 2 300 10 000K set the PUSH ON white balance can be adjusted exactly to get the real image color INDOOR the modeis available for the indoor circumstance with daylight lamp butif have lights of different color temperature indoor it is possible not to get right white balance FLUORESCENT LIGHT set the mode ON can get better and much real image under the fluorescent light OUTDOOR the mode is available for normal light outside but it s possible not to get right white balance under circumstance of high color temperature such as setting sun light MANUAL WB the mode is available to the stable circumstance with same light Adjusting way set manually through left and right key to get the best state ET 8 Enter AE MODE menu through left or right key to set the electronic shutter and gain AE MODE SET FLICKERLESS AE SHUTTER MANUAL EXIT PRESS MENU KEY FLICKERLESS while video system of the camera doesn t match with the light frecency of the using
Download Pdf Manuals
Related Search