AA00537 LiPo Pack Anleitung LRP E 071008 Fv
Contents
1. according to our price list A proof of purchase including date of purchase needs to be included Otherwise no warranty can be granted For quick repair and return service add your address and detailed description of the malfunction If LRP no longer manufactures a returned defective product and we are unable to service it we shall provide you with a product that has at least the same value from one of the successor series The specifications like weight size and others should be seen as guide values Due to ongoing technical improvements which are done in the interest of the product LRP does not take any responsibility for the accuracy of these specs LRP Distributor Service e Package your product carefully and include sales receipt and detailed description of mal function e Send parcel to your national LRP distributor e Distributor repairs or exchanges the product e Shipment back to you usually by COD cash on delivery but this is subject to your national LRP distributor s general policy2. charge levels can lead to serious overcharging of the battery even if you are using a charger with LiPo capabilities e Damaged packs cannot be used any longer If the packs show signs of damage are bent or similar do not use the packs anymore e The chemical reaction during charging and discharging a LiPo battery is not fully reversible Due to that LiPo batteries loose capacity during their life span This is normal and not a manufacturing nor production fault Disposal note Damaged packs or packs which can no longer be used are hazardous waste and have to be disposed accordingly 3 STORAGE LRP VTEC LiPo batteries do not have a memory effect and only a very low self discharge rate Therefore these batteries can be stored over a longer period of time without special treatment You only have to take care that the batteries do not get stored completely empty For a storage over a longer period of time we recommend to charge the battery up to 50 of the nominal capacity Therefore fully discharge the battery pack and then partially charge it witha charge current of 1C for 30 minutes In this condition the battery can be stored at least half a year without the need of recharging it For a storage over a short period of time you also have to pay attention that the battery is partially charged Never store the battery completely empty Even if you are using your battery regularly every week always pay attention that the battery
3. AA00537 LRP electronic GmbH 2007 CAR FLIGHT POWERPACKS TX RX PACKS LITHIUM POLYMER POWER HIGH CAPACITY LRP electronic GmbH Wilhelm Enssle Str 132 134 73630 Remshalden Germany info LRP cc www LRP cc 1 CONNECTIONS All LRP VTEC LiPo batteries come with properly sized power wires incl plugs These power wires have to be used for standard charging and for all applications in the model device Additionally to the power wires incl plugs all LRP VTEC LiPo batteries except the RX only packs are equipped with a so called Balancing port This Balancing port can be used to condi tion and equalize the individual cells inside a LRP VTEC LiPo battery pack Special balancers or certain chargers use this balancing port to perfectly condition and equalize the individual cells inside the pack Please check the user manual of the balancer charger in order to know how the battery needs to be hooked up Note The Balancing port shall not be used for the standard use in the model device Only use the power wires incl plugs to power your model device For the standard applications the Balancing port is not necessary Nevertheless do never cut off or remove the Balancing port plug Balancing port 3 pole 7 4V packs Black Battery Negative Cell 1 Brown cell connection Cell 1 Cell 2 Red Battery Positive Cell 2 Power wires incl plugs Red Battery Positive Black
4. Battery Negative Balancing port 4 pole 11 1V packs Black Battery Negative Cell 1 Brown cell connection 1 Cell 1 Cell 2 Blue cell connection 2 Cell 2 Cell 3 Red Battery Positive Cell 3 Power wires incl plugs Battery Positive Battery Negative Balancing port 5 pole 14 8V packs not shown Black Battery Negative Cell 1 Brown cell connection 1 Cell 1 Cell 2 Blue cell connection 2 Cell 2 Cell 3 Green cell connection 3 Cell 3 Cell 4 Red Battery Positive Cell 4 Dear Customer thank you for your trust in this LRP product By purchasing a LRP VTEC Lithium Polymer battery LiPo battery you have chosen a high performance battery for your RC model Please read the following instructions to ensure that your LRP VTEC LiPo battery always works up to your full satisfaction LiPo batteries need special treatment and care Please read the following instructions carefully before you start using your LRP VTEC Lithium Polymer battery This user guide contains important notes for the installation the safety the use and the maintenance of this product Thus protecting yourself and avoid damages of the product Proceed according to the user guide in order to understand your LRP VTEC Lithium Polymer battery better Please take your time as you will have much more joy with your product if you know it exactly This user manual shall be kept in a safe place If another custom
5. ding to the highest quality standards LRP guarantees this product to be free from defects in materi als or workmanship for 90 days non european countris only from the original date of purchase verified by sales receipt This limited warranty doesn t cover defects which are a result of misu se improper maintenance outside interference or mechanical damage This especially applies on already used batteries or batteries which show signs of heavy usage Damages or output losses due to improper handling and or overload are not a product fault Signs of wear loss of Capacity after intensive usage are also no product fault To eliminate all other possibilities or improper handling first check all other components in your model and the trouble shooting guide if available before you send in this product for repair If products are sent in for repair which do operate perfectly we have to charge a service fee according to our pricelist The following points do also result in a service fee e Original power plugs replaced with a NON reverse polarity protected power plug system e Send in the battery without power plugs e Removed or damaged original heatshrink With sending in this product the customer has to advise LRP if the product should be repaired in either case If there is neither a warranty nor guarantee claim the inspection of the product and the repairs if necessary in either case will be charged with a fee at the customers expense
6. er is using this product this manual has to be handed out together with it 2 SPECIAL NOTES FOR HANDLING e Avoid short circuits Short circuiting the battery results in very high currents which damage the internal structure of a LiPo battery This leads to a loss of power and capacity Be sure not to damage the outside of the LiPo battery The battery is protected by a he atshrink The actual Lipo cell is directly under this heatshrink If the outer skin of the cell gets damaged the battery can no longer be used Therefore take special care that no sharp objects like knifes tools carbon fibre edges or similar items can damage the battery e When securing the LiPo battery inside your model device you have to take care that the LiPo battery does not get damaged or warped in case of a crash LiPo batteries are less mechanical resistant then NiMH batteries in a metal can Therfore pay special attention that the LiPo battery does not get damaged or warped by letting it fall down hitting it bending it or by similar actions e If you want to change the plug system of your LiPo battery take care that you only attach the new plugs to the power wires directly Under no circumstances your allowed to solder directly on the tabs of the LiPo cells Please note that there s the possibility to void your limited warranty when changing the plug system e Never charge several LiPo battery packs at once with one charger The different capacities and
7. harging the battery LRP VTEC LiPo batteries do not heat up during charging It is normal that the battery still has ambient temperature when it is fully charged If the battery heats up during charging or warps immediately stop charging it The maximum charging voltage for each single LiPo cell is 4 20V If the battery reaches this voltage the charge current has to be lowered This is automatically done by the charger If the charge current reaches 0 05 0 1C the battery is fully charged All LRP VTEC LiPo batteries consist of multiple LiPo cells You can see the max charging voltage in the table below LRP VTEC LiPo batteries do not have a memory effect and only a very low self discharge rate Therefore you can also charge batteries with a partial charge in them without the need of discharging the pack before Partially charged packs can be stored over a long period of time without getting damaged Please also see the Storage section for further reference We recommend the following settings for charging our LRP VTEC LiPo batteries 3 max max Size Battery Style Order L W Hinmm charge charging current voltage furopackeeo 7av 2sienast fomo soaz f osa saw Please Note You can use your LRP VTEC LiPo battery several times a day However be sure that the battery has completely cooled down to ambient temperature before re charging it again C Nominal capacity of the battery E g with a nominal capacity of 3300
8. is partially charged with at least 20 of the nominal capacity during storage A partial charge with 1C charge current for 10 minutes is sufficient in this case if the battery was competely empty before If you pay attention to the above mentioned notes you can enjoy your LRP VTEC LiPo battery for a very long time 4 USE OF RX ONLY PACKS Due to the nominal voltage of 7 4V of all RX only packs these battery packs cannot be connected directly to the receiver Standard receivers and servos work with a voltage of 6V and therefore will not work properly or get damaged You need our LRP LiPo RX Regulator 6V 5A 45000 to connect a RX only pack to your receiver This regulator reduces the voltage to a safe level of 6V and will be connected directly between the LRP VTEC LiPo RX only battery and the receiver Please see the instruction manual of the LRP LiPo RX Regulator 6V 5A 45000 for further reference 5 CHARGING All LRP VTEC LiPo batteries can be charged with a maximum current of 1C For charging only use chargers which are specially designed and developed for LiPo batteries These chargers charge the battery with the max current till the battery reaches the max charging voltage The charger then reduces the charging current until the battery is fully charged ATTENTION Under no circumstances use NiMH NiCd chargers for charging LiPo batteries These chargers do not reduce the charging current and therefore ultimately lead to overc
9. mAh 3 3Ah the battery can be charged with a max current of 3 3A 6 DISCHARGING All LRP VTEC LiPo batteries except the RX TX packs are capable of a maximum peak dischar ge current of 25C The special manufacturing technology of the LRP VTEC LiPo batteries make these high discharge currents possible The continous discharge current for all LRP VTEC LiPo batteries except the RX TX packs is 15C Please note RX TX only packs can only be used for the typical application as receiver RX only or transmitter TX only pack They are not suited for high discharge currents You have to take care that the batteries do not get deep discharged As soon as the battery voltage falls below 2 80V per single cell the battery pack gets damaged irrevocably With 2S packs the discharge cut off voltage is 5 6V with 3S packs it is 8 4V and with 4S packs the discharge cut off voltage is 11 2V The battery voltage should never fall below these discharge cut off voltages If your speed control does not have a special undervoltage protection for LiPo batteries you have to stop your model early enough in order not to deep discharge the battery pack Therefore stop immediately as soon as you feel a rapid loss in power IMPORTANT The max temperature of the LiPo battery during discharge must never exceed 60 C 140 F REPAIR PROCEDURES LIMITED WARRANTY All products from LRP electronic GmbH hereinafter called LRP are manufactured accor
Download Pdf Manuals
Related Search