FM Stereo Clock Radio
Contents
1. Button to set the alarm volume range is 05 40 Press and release the Alarm button again or no button within 10 seconds to exit the alarm setting mode The alarm will be armed once set and the corresponding alarm icon will light up The lower part of the display will show the earliest set alarm time co a gt Using the Alarms Reviewing Arming and Disarming Alarm Turn Alarm Function On and Off Alarms are automatically armed when set Active alarms are indicated by alarm icons on the display i 2 3 Once an alarm is armed the lower part of the display will show the alarm time If more then one alarm is armed the earliest alarm time will show To review the alarm time press an alarm button once The related alarm time and wake source will show on the lower part of the display During alarm review press and release the Alarm Button once to toggle it on or off If the alarm is armed the related alarm icon will light up Resetting the Alarm to Come on the Next Day 1 When the alarm is sounding press and release the Button or or Buttons to stop the alarm and reset it to come on the next set day For example if alarm is set for weekdays and you reset the alarm on Friday the alarm will come on again on Monday not Saturday Snooze 1 To program a custom snooze time press and hold the Snooze Button during normal operation when alarm is not sound ing until the snooze minutes display appears Press and2. as iPod mini do not support this feature By default the unit is set to AUTO SYNC ON mode and will attempt to autosync the time whenever a capable iPad iPhone or iPad is docked to the Lightning dock OR connected to the USB dock and at 2AM each day To manually time sync at any time to a docked device press and release the Clock Button NOTE iPhone time is automatically updated to the correct time via cell phone towers The time on your iPad or iPod is accurate only to the time on the computer the last time the iPad iPod was synced to it It s possible to have up to 59 seconds difference between the unit and a synced iPad iPhone iPod Setting Time and Calendar Manually Autosync must be OFF to set the clock manually 1 Press and hold the Clock Button located on the top of the unit until AUTOSYNC ON or AUTOSYNC OFF flashes on the display if AUTOSYNC ON appears press the or Button to toggle to AUTOSYNC OFF setting 2 Press and release the Clock Button The time display will flash Press the or Button to adjust the time hold for a few seconds to advance or reverse rapidly Remember to set the correct AM or PM hour An icon to the left of the time display indicates AM or PM 3 Press and release the Clock Button again The year will flash in the lower part of the display Press and release the or Button until the current year is displayed 4 Press and release the Clock Button again The month and date will fla
3. release the or Button to set the snooze time from 1 to 29 minutes 2 Press the Snooze Button after the alarm sounds The alarm will be silenced and come on again 9 minutes later or at the custom minute interval you set Snooze can be pressed several times during the 1 hour alarm cycle Sure Alarm The unit has a sure alarm feature so the buzzer alarm still sound in the event of a power failure if the backup battery is installed see page 7 If your iPad iPhone iPod has no sound for 35 seconds or is not present the unit will switch to buzzer alarm automatically Listening to iPad iPhone or iPod Using the Dock or USB Port This unit features both a Lightning dock located on top of the unit exclusively to play and charge iOS devices equipped with the latest Lightning connector AND a USB dock located on back of the unit which can play and charge both iOS devices with 30 pin connectors such as iPhone 4 iPad etc AND Lightning devices using the charging cable that came with the device Play and pause a device connected to the Lightning dock OR the USB port using the p11 Presets Button The last device connected will play only one device can play at a time To switch between Lightning dock or USB dock press and release the Mode Button as needed until Dock or USB Dock appears on the lower part of the display indicating which dock on the unit is in iPod mode Directions below apply to whichever dock you wish to con
4. the gt il Button on the unit to play your iPad iPhone or iPod 4 Radio Press and release the Mode Button as needed to select FM band Press and release the or Button to tune in a station See page 7 for programming presets Connecting the Unit to Power Source Connect the AC adaptor cable plug into the DC jack on the back of the system then plug the AC adaptor into the wall outlet Adaptor must be plugged in to operate unit The unit does not operate on batteries the battery back up system maintains clock settings during power failures Updating your iDL46 firmware For best performance make sure to update the iDL46 firmware To do so download the free iHome Set app from the App Store Launch the app scroll to Search for Update then follow directions to update the firmware Turning the Unit ON or OFF Press the Button on the unit at any time to turn the unit On or Off Note that a docked iPad iPhone or iPod will continue to charge when the unit is turned off as long as the AC adaptor is plugged in You can also turn the unit ON automatically by docking a playing device or connecting one to the USB dock and turn the unit OFF by disconnecting a playing device from the dock OR USB dock Setting the Clock Time Using AutoSync The AutoSync feature automatically syncs the time setting on the unit to the time on your iPad iPhone or recent model iPod iPod touch iPod nano and iPod Classic older iPod models such
5. to adjust the nap timer for 5 10 15 20 30 45 60 90 or 120 minutes or OFF 2 Once nap alarm sounds press the Nap Button to turn it off Dimmer Operation During normal operation press and release the Snooze Dimmer Button to control the brightness of the LCD display Installing and Replacing Clock Backup Batteries Note 2 AA batteries are included with the unit Install them before using the unit This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption the display is NOT maintained The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out When the backup batteries are getting weak the Low Backup Battery Indicator will begin flashing in the display When you see this flashing indicator you should replace the backup batteries as soon as possible Note We recommend alkaline batteries for best performance To install replace the backup batteries IMPORTANT When replacing the backup batteries be sure to have the unit connected to the AC outlet to maintain all of your settings otherwise it will be necessary to reset the time and alarm time after the batteries are replaced 1 Slide and remove the battery door located on the bottom of the unit If replacing batteries remove the exhausted batteries 2 Insert 2 fresh AA batteries in the backup battery compartment Make
6. while listening to any sound source 1 Press the or Button on the unit to adjust the system volume range is 00 40 2 Press and release the EQ Button as needed to select Treble Bass Balance or 3D sound effect then press the or Button to adjust settings TIP You can also adjust EQ with the iHome Set app Listening to Radio Setting up the Antenna Extend FM wire antenna fully for best reception Do not strip alter or attach to other antennas ee and Playing the Radio Press and release the Mode Button as needed to cycle through Dock USB Dock FM radio and Aux in modes When FM mode is selected press the or Button to tune the radio to a desired station The current radio frequen cy appears in the lower right of the display Press the or Button for a few seconds to scan for the next clear station To memorize a station as a preset A Press the vil Presets Button as needed to step through the 6 presets P1 P6 to the number you wish to assign and then hold the MII Presets Button until the selected preset number begins flashing in the display B Press the or Button to tune the radio to a desired station Hold briefly to have the radio autoscan search for the next clear station C Press the vil Presets Button to confirm the setting two beeps will confirm the setting and the preset number you wish to assign Repeat steps A C to preset up to 6 stations To listen to a preset station press t
7. 013 SDI Technologies Inc All rights reserved Questions Visit www ihome com or call 1 800 288 2792 Toll Free iDL46 1402101 B Printed in China
8. Requiring Service The unit should be serviced by qualified service personnel when the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally 12 Antenna Do not connect an external antenna to the unit other than that provided 13 Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion 14 Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel 10 Troubleshooting Symptom Possible Problem Unit does not turn on AC adaptor isn t plugged into a working wall Plug the AC adaptor into a working wall socket and plug the connector socket or not plugged into the power supply into the supply jack on the unit jack on back of the unit Unit doesn t respond Unit requires a reset If unit is plugged in and doesn t respond try resetting the unit by following these steps a remove iPad iPhone iPod from dock b unplug unit from power source c remove back up battery d wait a few minutes the
9. air or at its discretion replace this product without charge This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service The product must include proof of purchase including date of purchase An out of warranty fee for service will be charged for units that are received without proof of purchase Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Call SDI Customer Service at 1 800 288 2792 for Return Authorization and for the address of the Factory Service Center 2 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box SDI is not responsible for damage that occurs during shipping to the Factory Service Center 3 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period Also include your name and address information a brief description for why the unit is being returned and the return authorization number No unit can be processed without a return authorization number 4 Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service Center address authorized by SDI Customer Serv
10. alarm source to wake to Dock USB Radio or Buzzer For wake to Dock select Dock to wake to a docked iPad iPhone or iPod By default the Dock alarm wakes to the last track played on a docked device Normal Wake You can also wake to a custom playlist To do so press and release the or Button to select Playlist Wake You must create a playlist named iHome in iTunes and have it on your iPad iPod iPhone The unit will play music randomly from within the iHome playlist If no playlist is found unit will default to last track played If the unit does not detect an iPad iPhone iPod at the set alarm time the unit will default to buzzer alarm The alarm cycle lasts for one hour make sure you have enough music on your iPad iPhone or iPod to last that long For wake to USB select USB to wake to an iPad iPhone or iPod connected to the USB dock As with wake to Dock you can wake to either the last track played Normal Wake or to a custom playlist choose Playlist Wake as detailed above For wake to radio after selecting Radio as the wake to source press and release the Alarm Button and then press and release the or Button to select a radio station or press and release the mil Presets Button to select a preset radio station to wake to see Listening to Radio on page 7 for details on setting radio stations and presets Press and release the Alarm Button again then press and release the or
11. ass down on the device EQ settings are too high Lower EQ settings Unit adaptor gets This is normal Turn unit off for awhile or lower volume warm after extended play at high volume Snooze time Custom snooze time not set Press and hold Snooze button then press or Button to adjust is too long short Alarm not working AM PM time alarm time not set correctly When setting clock or alarm time take note of the AM PM indicators Alarm time or source selected for alarm 2 not Make sure to set the alarm time and source for the alarm icon 1 or 2 alarm 1 or vice versa that is shown on the clock display Wake schedule setting is not correct 7 days is every day alarm weekday is Mon Fri and weekend is Sat Sun See page 4 for setting alarms Calendar is not set correctly which can affect See page 3 for setting Clock Calendar Section wake schedule alarm operation 12 Limited 1 Year Warranty Information iHome Products a division of SDI Technologies Inc hereafter referred to as SDI warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of one 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI will rep
12. e Model iDL46 FM Stereo Clock Radio Questions For immediate assistance call 1 800 288 2792 Table of Contents Controls and Indicators Display QUICK Start sie ui SUR AU NE Using the unit Using the Alarms Listening to iPad iPhone or iPod Using the Dock or USB Port ss Listening to Radio Using the Unit in other Countries Listening to other portable audio devices Sleep Operation Nap Operation Dimmer Operation sise Installing and Replacing Clock Backup Batteries seen A Consumer Guide to Product Safety Aa Ea O E a EE aA E a a Aaa Eana iaaa TEOUDIGSIOOUING EE te E E E A A EN L ATLAS ARC AALE LORS FCC Information This device complies vvith Part 15 of the FCC Rules operation is subject to the follovving tvvo conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment e NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not in
13. eacting to external interference Move unit away from potential sources of external interference such as performance is erratic computers modems wireless devices routers or fluorescent light No sound from unit Volume is set too low on unit Make sure volume is turned up iPad iPhone iPod iPad iPhone iPod is not docked properly Remove your iPad iPhone iPod from the dock or USB dock and check didn t charge up for obstruction on the connectors in the dock and on your iPad iPhone iPod Then reseat it in the dock Try removing device case iPad iPhone iPod is locked up frozen Please make sure your iPad iPhone iPod is working properly before docking into the unit Please refer to your iPad iPhone iPod manual for iPad iPhone iPod battery has problem details Time sync didn t work Older iPod models such as iPod mini do not Make sure you are using an iPhone or newer iPod such as touch support time sync function nano or classic If not available set time manually see page 3 11 Troubleshooting Symptom Possible Problem Solution Sound is distorted Volume level is set too high Decrease the volume Sound source is distorted lf the iPad iPhone iPod original sound source MP3 is old or of poor quality distortion and noise are easily noticed with high power speakers Try a different file from a trusted source such as iTunes If you are using an external sound source try reducing the output volume on the device itself Also try turning b
14. em volume You may need to adjust your device volume too Remember to turn off your device when you are done playing it Sleep Operation Sleep mode lets you sleep to whatever is currently playing iPad iPhone iPod or the radio gradually lowering the volume until the unit shuts off at the selected time 1 Press the Sleep Button to enter sleep mode The Sleep Icon will appear on the display to indicate sleep mode Sleep mode has a Gentle Sleep feature which gradually lowers the volume The unit will automatically turn off after the selected sleep time 2 You can adjust the sleep timer from 120 90 60 30 15 minutes or OFF by pressing the Sleep Button again 3 When the display changes back to show the real time pressing the Sleep Button once will show the sleep time remaining Pressing it again will change sleep time to next lowest increment 4 iDL46 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the alarm volume Press the or Button on the unit to adjust the system sleep volume The sleep volume will remain at that level the next time you enter sleep mode until controls are changed 5 To stop listening at any time press the O Button on the unit to turn it off Nap Operation Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings The nap wake to source by default is the buzzer alarm 1 Press the Nap Button located on the top of the unit as needed
15. h the ventilation openings 3 Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket 6 Cleaning The unit should be cleaned only as recommended See the Maintenance section of this manual for cleaning instructions 7 Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product 8 Attachments Do not use attachments not recommended by the product manufacturer 9 Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and power line surges 10 Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Damage
16. he vil Presets Button to choose the desired preset Press the or Button on the unit to adjust the system volume Using the Unit in Other Countries Different regions of the world use different FM radio frequency steps and ranges You will need to select the one that matches the standards in your region USA EUROPE JAPAN AUSTRALIA or CHINA The default setting is USA if you live in the US you may skip this section 1 Make sure the unit is OFF not playing in any mode Press and hold the Mode Button for about 5 seconds until Radio USA appears in the lower part of display Press and release the or Button to change USA to your region Press and release the Mode Button again or no button within 10 seconds to exit the radio frequency setting mode Two beeps will confirm radio frequency setting co ns D Listening to other portable audio devices You can play an MP3 player or other portable audio device through the iDL46 via the Aux line in Jack 1 Plug one end of a 3 5mm stereo audio cable available at www ihome com into the headphone or line out jack on your device and the other end of the cable into the iDL46 Aux in Jack located on the back of the unit 2 Turn on the unit and press and release the Mode Button as needed until Aux in appears in the lower part of the display indicating Aux in playing mode 3 Turn on and play your device 4 Press the or Button on the unit to adjust the syst
17. ice Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI product 2
18. n restore battery and resume use iPad iPhone iPod is not docked properly Remove your iPad iPhone iPod from the dock USB dockand check for obstruction on the connectors in the dock and on your iPad iPhone iPod Then reseat it in the dock Also try removing any case or skin on your device that may be preventing proper contact Battery Low icon Battery is weak Replace with new battery always flashing E R Battery was not installed properly Check to make sure the side is facing outwards iPad iPhone iPod does iPad iPhone iPod is not docked properly Remove your iPad iPhone iPod from the dock and check for obstruction not respond to the on the connectors in the dock and on your iPad iPhone iPod Then reseat unit iPad iPhone iPod it in the dock is playing but no 7 3 ET sound comes out Your iPad iPhone iPod softvvare is too old SI NE les on your iPad iPhone iPod via iTunes on your iPad iPhone iPod is locked up plays but no Check the volume setting Make sure your iPad iPhone iPod is working sound comes out properly before docking into the unit Please refer to your iPad iPhone iPod manual for details See above for software upgrade information You may need to reset your iPad iPhone iPod Refer to your iPad iPhone or iPod user guide for details on how to perform a reset Using 1 St or ond generation iPod iPod Shuffle Unit cannot control those iPod models or other devices or other devices Unit iPad iPhone iPod The unit is r
19. sh Press and release the or Button until the current month and date is displayed 5 Press and release the Clock Button once more Two beeps will sound to confirm your settings and you will exit Time and Calendar Setting mode 3 Toggling 12 and 24 Hour Display es At any point during time set mode press and release either the Button or between 12 hour and 24 hour display formats Using the Alarms This unit has a dual alarm system so you can set two separate alarms to different alarm times wake to sources and schedules daily weekdays or weekend Tip Download the free iHome Set app for advanced alarm snooze and sleep functions Button while display is flashing to switch Setting the Alarms Note Alarm 1 and Alarm 2 are set the same way Alarm Button below means the button or for whichever alarm you are setting 1 Press and hold the or Button until the alarm time flashes on the lower part of the display Press and release the or Button to set the alarm time press and hold for faster setting Remember to set the correct AM or PM time 2 Press and release the Alarm Button again to confirm the set alarm time then press and release the or Button to set the alarm schedule wake 7 days the whole week wake weekday Monday through Friday wake weekend Satur day and Sunday only Press and release the Alarm Button again then press and release the or Button to select an
20. stalled and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmiul interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help CAN ICES 3 B NMB 3 B Maintenance e Place the unit on a level surface away from sources of direct sunlight or excessive heat e Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzene thinner or similar materials can damage the surface of the unit Controls and Indicators Top Panel f Dock Flexible Lightning Device rest Clock Button Connector for iPad iPhone iPod iPad Supports Sleep Button Alarm 1 Button EQ Button Alarm 2 But
21. sure the polarity of the batteries or nodes matches the illustration 3 Slide and close the battery compartment door Confirm that the backup battery indicator is not flashing in the display Note Make sure you dispose of batteries properly see your local regulations Replacing Backup Battery Battery Warning e Do not heat above 75 C 167 F e Do not expose contents to water e Do not open batteries e Do not dispose of in fire e Do not install backwards IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 Water and Moisture The unit should not be used near water For example near a bathtub washbowIl kitchen sink laundry tub swimming pool or in a wet basement 2 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a built in installation such as a bookcase or cabinet which may impede the flow of air throug
22. ton Alarm Reset e Power Button O 0 clock Mode Button di A wakeup bedtime _ Play Pause Lower Raise snooze dimmer Presets Button Volume Button Set Button Nap Button skip search FWD REV Snooze Dimmer Button USB Charging and Playing Dock Rear Panel DC Jack Aux in Jack UE FM Antenna Display Time Display PM Indicator AM Indicator Alarm Indicators iHome App Indicator Battery Low Indicator NOTE AM PM indicators will not appear Alarm Time EQ Mode Display Dock USB Dock FM Aux in when clock is set to 24 hour display mode Quick Start 1 Povver Attach AC adaptor cable to DC jack on back of the unit and plug the other end into a wall socket Insert 2 included AA batteries into the backup battery compartment on the bottom of the unit Extend FM antenna for best reception 3 Setting Clock with AutoSync Dock your Lightning compatible iPad iPhone or iPod see step 2 The unit will attempt to autosync to the time on your iPad iPhone or iPod The time on the display will update This process takes about 3 seconds 2 docking your iPad iPhone iPod in the Lightning While the dock accommodates most cases you may need to remove your case for proper docking Gently dock any iPad iPhone or iPod with Lightning connector onto the Lightning dock on top of the unit The iPad iPhone or iPod will charge while docked Press
23. trol 1 Connecting using the Lightning Dock While the dock accommodates most cases you may need to remove your case for proper docking Dock any already playing iPad iPhone or iPod touch with a Lightning connector in the Lightning dock on top of the unit The unit will automatically turn on and in a moment you will hear the audio playing from your iPad iPhone iPod Connecting using the USB Dock Connect your iPad iPhone or iPod to the USB dock located on back of the unit using the USB charging cable that came with it Note If the audio source volume is too low on the iPad iPhone iPod the unit may not detect that the iPad iPhone iPod is in play mode If so pressing the bll Presets Button on the unit once should make it play 2 When an iPad iPhone iPod is docked to the Lightning dock or connected to the USB dock and in standby mode press the MI Presets Button on the unit to play the iPad iPhone iPod If the unit is already on press and release the Mode Button as needed until Dock or USB Dock appears on the lower part of the display indicating which dock on the unit is in iPod mode Press the Pll Presets Button on the unit on the unit to pause play press again to resume play 4 Press the or Button on the unit to go to the next or previous track Press and hold while track is playing for high speed forward or reverse music search of the current track w Adjusting Sound on the Unit You can adjust the sound on the unit
Download Pdf Manuals
Related Search