High Performance High Performance
Contents
1. LT erformance Oscillating Fan Owner s Guide SN ANN h S 9 Yj Vy 4 IMPORTANT SAFETY INFORMATION Read amp Save These Instructions WARNING To reduce the risk of fire or electrical shock DO NOT use this fan with any solid state speed control device CAUTION When using electrical appliances basic precautions should always be taken to reduce the risk of fire electric shock and personal injury 1 Read all instructions before using this fan Improper installation may result in the risk of fire electric shock or personal injury To prevent the risk of fire and electric shock DO NOT use the unit near windows Rain and moisture may create an electrical hazard The power plug must be removed from the power Socket when not in use before cleaning servicing maintenance and before moving to another location DO NOT put fan in a damp place or where humidity is high such as a bathroom The fan should be placed on a flat stable surface or tabletop to avoid overturning Use fan only for intended use as described in this instruction manual To protect against electrical shock DO NOT immerse unit plug or cord in water or spray with liquids 2011 Hunter Fan Co Close supervision is necessary when any appliance is used by or near children NEVER insert fingers pencils or any other objects through the grill when th2. Power Speed Control knob from OFF to the desired speed setting O off III High II Medium Low To control the upward and downward direction of airflow loosen the screw on the side of the fan housing neck Adjust to the desired angle and tighten the screw To make the fan oscillate push the oscillation knob down To stop oscillating pull the oscillation knob up The oscillation knob is located on the top of the fan housing near the handle Oscillation Knob Up Down Adjustment Screw 44826 01 20111014 MAINTENANCE This fan is permanently lubricated and will not require additional lubrication oil for the life of the fan This fan requires little maintenance and contains no user serviceable parts DO NOT try to fix it yourself Contact qualified service personnel if servicing is needed TO CLEAN 1 Before cleaning turn fan off and unplug from electrical outlet Wipe off excess dust with a lint free cloth 2 To ensure adequate air circulation to the motor keep vents located at the rear of the motor housing free from dust accumulation A vacuum cleaner hose can be used to clean these vents 3 DO NOT immerse the fan in water or any other liquid CLEANING GRILL AND BLADE 1 Turn the fan off and unplug from the electrical outlet 2 Disassemble grills by carefully removing the screw on the bottom of the ring See Figure 4 3 Remove the ring 2011 Hunter Fan C
3. WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE IN RESPECT TO THE GLASS GLOBES OR LIGHT BULBS OR THE FINISH ON ANY METAL PORTION OF THE FAN THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES THE DURATION OF ANY IMPLIED WARRANTY INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN RESPECT TO ANY HUNTER FAN MOTOR OR OTHER FAN PART IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE FOR SUCH MOTORS AND OTHER PARTS This warranty is voided if your Hunter Fan is not purchased and used in the USA This warranty excludes and does not cover defects malfunctions or failures of any Hunter Portable fan which were caused by repairs by persons not authorized by us use of parts or accessories not authorized by us mishandling improper installation modifications or damage to the Hunter Portable fan while in your possession or unreasonable use including failure to provide reasonable and necessary maintenance 44826 01 20111014 To obtain servicing contact the nearest Hunter authorized service center or the Hunter Fan Company Service Department 7130 Goodlett Farms Pkwy Suite 400 Memphis Tennessee 38016 Please contact us before shipping your fan to us If we authorize you to ship it to us you will be responsible for all insurance and freight or other transportation charges to our factory service center W
4. Y The Hunter Fan Company makes the following limited warranty to the user or consumer purchaser of this Hunter Portable fan If your Hunter Portable Fan motor fails at any time within five years after the date of sale to you due to a defect in material or workmanship labor to repair the defect will be provided free of charge at our nearest service center or our Service Department in Memphis Tennessee You will be responsible for labor costs after this one year period The foregoing limited warranty applies only to the motor itself and does not apply to electronic controls such as remote controls remote control receivers or transmitters used in conjunction with the motor These electronic control items are included in the one year limited warranty below If any part of your Hunter Portable Fan other than the motor fails at any time with one year after the date of sale to you due to a defect in material or workmanship we will repair or at our option replace the defective part free of charge for parts and labor performed at our nearest service center or at our Service Department in Memphis Tennessee IF THE USER OR CONSUMER PURCHASER CEASES TO OWN THE FAN THIS WARRANTY AND ANY IMPLIED WARRANTY WHICH THEN REMAINS IN EFFECT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY 2011 Hunter Fan Co OR FITNESS FOR A PARTICULAR PURPOSE ARE VOIDED NO WARRANTY EXPRESSED OR IMPLIED INCLUDING ANY
5. e fan is running DO NOT operate any appliance with a damaged cord or plug after the appliance malfunctions or has been dropped or damaged in any manner To disconnect grip plug and pull from wall outlet NEVER yank on cord ALWAYS use on a dry surface This product is intended for household use only and not for commercial or industrial use DO NOT operate fan in the presence of explosive and or flammable fumes DO NOT place fan or any parts near an open flame cooking or any other heating appliances DO NOT use near curtains plants window treatments etc This appliance has a grounded three prong plug and is suitable for grounded receptacle use only An adapter is available for connecting three blade grounding type plugs to two slot receptacles The adapter must be properly grounded DO NOT attempt to defeat the purpose of this safely feature The rubber feet on this product may interact with wood and cause damage to furniture Do not place on fine wood furniture 44826 01 20111014 WELCOME UNPACKING Thank you for choosing the Hunter Millennium Table Fan This manual gives you complete instructions for using your fan Here are some the features you will enjoy with your fan An attractive design that enhances any decor A powerful Hunter motor for maximum air flow Three speeds to adjust your comfort level Before installing your fan record the fol
6. e will return your Hunter Fan freight prepaid Your portable fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage Proof of purchase is required when requesting warranty service The purchaser must present sales receipt or other document that establishes proof of purchase IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU THE WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE Santer 2011 Hunter Fan Co 10 44826 01 20111014 44826 01 20111014
7. lowing information for your records and for warranty assistance Model Name Date Code Date Purchased Where Purchased Please attach your receipt or a copy of your receipt to this manual for future reference 2011 Hunter Fan Co As you unpack the fan save the carton and packing materials in case you want to move or ship the unit in the future Carefully remove all items from the box NOTE It is best to have someone hold the box while you lift the fan and the protective packaging out of the carton Make sure all shipping materials are removed from fan before operating 44826 01 20111014 GROUNDING INSTRUCTIONS This appliance is for household use only and may be plugged into any 120 volt AC electrical outlet ordinary household current DO NOT use any other type of outlet WARNING This unit is suitable for grounded receptacle use only The cord has a grounded plug as shown in Figure 1 An adapter as shown in Figure 2 is available for connecting three blade grounding type plugs to two slot receptacles The green grounding lug extending from the adapter must be connected to a permanent ground such as a property grounded outlet box The adapter should not be used if a three slot grounded receptacle is available Grounded Plug LD LU Grounding Grounded Outlet Pin Box Cover FIGURE 1 2011 Hunter Fan Co LINE CORD SAFETY TIPS 1 NEVER p
8. o gt Ring Use a dry or slightly damp lint freecloth to clean the fan Use a soft slightly damp cloth to wipe the remaining fan parts DO NOT allow water or any other liquid to get into the motor housing or base Reassemble the fan after blades and grills have dried completely Align the grills replace the ring and replace the screw DO NOT plug fan into an electrical outlet until it has been fully reassembled Oscilation Housing Up Down Adjustment Screw Control Switch FIGURE 4 44826 01 20111014 STORAGE Disassemble and clean fan before storing Keep the original packaging for the purpose of storing the fan ALWAYS store the fan in a dry place NEVER store the fan while it is still plugged in NEVER wrap the cord tightly around the fan DO NOT put any stress on the cord where it enters the fan as it could cause the cord to break 2011 Hunter Fan Co TROUBLESHOOTING PROBLEM eFan will not oscillate SOLUTION Push down on knob on top of motor housing to activate oscillation PROBLEM Can not adjust the angle of the fan SOLUTION Loosen the screw on the side of the fan neck Adjust to the desired angle and tighten the Screw If you have tried these troubleshooting solutions and still have trouble call 1 888 830 1326 For CAN 1 866 268 1936 or visit our website at http www hunterfan com 44826 01 20111014 WARRANT
9. our technical support department for assistance Fuse Replacement 1 Toreplace the fuse first turn the unit it off and unplug it from the wall Locate the door on top of the plug Figure 1 2 Slide the door on top of the plug towards the blades Figure 2 3 Carefully remove the fuse from the clips holding it on the top and bottom Figure 3 Warning Electrical Hazard Only replace with a fuse type and rating matching what was removed from the product 4 Gently push the fuse back into the pins that will hold it in place Note If the fuse is not seated properly the unit will not function 5 Slide the door back over the fuse Figure 3 box in the plug 6 Plug the fan back in and resume use 2011 Hunter Fan Co 5 44826 01 20111014 OPERATION This appliance is for household use only 1 Place the fan on a dry safe flat surface where it cannot fall or be pulled by the cord 2 Plug the fan into a grounded 120 volt AC electrical outlet ordinary household current DO NOT use any other type of outlet Make sure that the rated voltage of the fan is the same as the power source before plugging it into the power source 3 Turn the fan ON or OFF by turning the Power Speed Control knob The power should always be OFF before unplugging the fan Power Speed Control Knob FIGURE 3 2011 Hunter Fan Co 4 To select the speed turn the
10. ull or yank on the cord or the appliance 2 To insert plug grasp it firmly and guide it into the outlet 3 To disconnect the appliance grasp the plug and remove it from the outlet 4 Before each use inspect the line cord for cuts and or abrasion marks If any are found the appliance should be serviced and the line cord replaced Please return it to our Service Department or to an authorized service representative 5 NEVER wrap the cord tightly around the appliance as this could place undue stress on the cord where it enters the appliance and could cause it to fray and break 6 DO NOT operate appliance if the line cord shows any damage if the appliance works intermittently or stops working entirely Adapter Metal Screw Grounding Grounded Outlet Means Box Cover FIGURE 2 44826 01 20111014 FUSED PLUG This plug is a safety feature It contains a safety device fuse that should not be removed Discard product if the attachment plug is damaged To reduce the risk of fire electric shock and personal injury DO NOT remove M replace repair or tamper with the originally supplied plug If the fan does not function properly it may be due to the SS safety device incorporated in this plug If the fuse fails it is generally due to a short circuit or circuit overload Replace the fuse as per the instructions below If the replacement fuse fails immediately unplug the unit and contact
Download Pdf Manuals
Related Search