USER`S MANUAL - ICON Health & Fitness, Inc. Customer Service
Contents
1. Nordiclirack Model No NTL61011 0 Serial No Write the serial number in the space above for reference USER S MAN UAL Ki 5 LOY Serial Number QUESTIONS If you have questions or if parts are damaged or missing DO NOT CONTACT THE STORE please contact Customer Care IMPORTANT Please register this product see the limited warranty on the back cover of this manual before contacting Customer Care CALL TOLL FREE 1 800 TO BE FIT 1 800 862 3348 Mon Fri 6 a m 6 p m MT Sat 8 a m 4 p m MT ON THE WEB www nordictrackservice com Read all precautions instruc tions in this manual before using FREE this equipment Keep this manual f quip p Dit HOW TO VIDEOS for future reference www iFit com TABLE OF CONTENTS WARNING DECAL PLACEMENT 2 IMPORTANT PRECAUTIONS 0 000000 E EEEE EEEE ERE E 3 BEFORE YOU BEGIN Re ace nian E a aa cues 5 PART IDENTIFICATION CHART oso ii a eine ete ee ES a 6 ASSEMBLY neadan Heda ee RR aes eed eee weed dae be a 7 OPERATION AND ADJUSTMENT ostia sare e dawn ead eed AO PA Male ERA 14 HOW TO FOLD AND MOVE THE TREADMILL 22 TROUBLESHOOTING ia anita Aaa eden ania e dates 23 EXERCISE GUIDELINES ceria c2. 17 18 19 other electrical devices except for low power devices such as cell phone chargers into the surge suppressor or into an outlet on the same circuit Use only a surge suppressor that meets all of the specifications described on page 14 To purchase a surge suppressor see your local NORDICTRACK dealer call the telephone number on the front cover of this manual or see your local electronics store Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill If the control system is damaged the walking belt may slow accelerate or stop unexpectedly which may result in a fall and serious injury Keep the power cord and the surge suppres sor away from heated surfaces Never move the walking belt while the power is turned off Do not operate the treadmill if the power cord or plug is damaged or if the treadmill is not working properly See TROU BLESHOOTING on page 23 if the treadmill is not working properly Read understand and test the emergency stop procedure before using the treadmill see HOW TO TURN ON THE POWER on page 16 Never start the treadmill while you are stand ing on the walking belt Always hold the handrails while using the treadmill The treadmill is capable of high speeds Ad just the speed in small increments to avoid sudden jumps in speed The heart rate monitor is not a medical device Various factors including the
3. button or press the Display button until the desired tab is shown The Incline tab will show a profile of the incline set tings of the workout A new segment will appear at the end of each minute 17 The Speed tab will show a profile of the speed set tings of the workout The My Trail tab will show a track that represents 1 4 mile 400 m As you exercise the flashing rectangle will show your progress The My Trail tab will also show the number of laps you complete The Calorie tab will show the approximate amount of calories you have burned The height of each segment represents the amount of calories burned during that segment Note When you select the Calorie tab the calorie display will show the ap proximate number of calories burned per hour As you exercise the workout intensity level bar will indicate the approximate intensity level of your exercise SE MENS 77 Press the Home button to return to the default menu see THE INFORMATION MODE on page 21 to set the default menu If necessary press the Home button again When a wireless iFit Live module is connected the wireless symbol at the top of the display will show the strength of your wireless signal Four arcs indicate full signal strength To reset the displays press the Stop button re move the key and then reinsert the key 6 Measure your heart rate if desired Before using the heart rate moni tor remove the she
4. on first re move the key and UNPLUG THE POWER CORD Using the hex key turn both idler roller screws clockwise 1 4 of a turn When the walking belt is correctly tightened you should be able to lift each edge of the walking belt 2 to in 5 to 7 cm off the walking platform Be careful to keep the walk ing belt centered Then plug in the power cord insert the key and carefully walk on the treadmill for a few minutes Repeat until the walking belt is properly tightened EXERCISE GUIDELINES AWARNING Before beginning this or any exercise program consult your physi cian This is especially important for persons over age 35 or persons with pre existing health problems The heart rate monitor is not a medical device Various factors may affect the accuracy of heart rate readings The heart rate monitor is intended only as an exercise aid in determin ing heart rate trends in general These guidelines will help you to plan your exercise program For detailed exercise information obtain a reputable book or consult your physician Remember proper nutrition and adequate rest are essential for successful results EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system exercising at the proper inten sity is the key to achieving results You can use your heart rate as a guide to find the proper intensity level The chart below shows recommended heart rates for fat burning and aerob
5. the key from the console HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL To avoid damaging the treadmill adjust the incline to the lowest position before you fold the treadmill Then remove the key and unplug the power cord CAUTION You must be able to safely lift 45 Ibs 20 kg to raise lower or move the treadmill 1 Hold the metal frame firmly in the location shown by the arrow below CAUTION Do not hold the frame by the plastic foot rails Bend your legs and keep your back straight 2 Raise the frame until the latch knob locks in the storage position CAUTION Make sure that the latch knob locks To protect the floor or carpet place a mat under the treadmill Keep the treadmill out of direct sunlight Do not leave the treadmill in the storage position in tem peratures above 85 F 30 C 22 HOW TO MOVE THE TREADMILL Before moving the treadmill fold it as described at the left CAUTION Make sure that the latch knob is locked in the storage position Moving the treadmill may require two people 1 Hold the frame and one of the handrails and place one foot against a wheel Pull back on the handrail until the treadmill will roll on the wheels and carefully move it to the desired location CAUTION Do not move the treadmill without tipping it back do not pull on the frame and do not move the treadmill over an uneven surface Place one foot against a wheel and careful
6. the walking belt to reach the selected speed setting If you press one of the numbered 1 Step Speed buttons the walking belt will gradually change speed until it reaches the selected speed setting To select a speed setting that includes a decimal such as 3 5 mph press two numbered buttons in succession For example to select a speed setting of 3 5 mph press the 3 button and then immedi ately press the 5 button To stop the walking belt press the Stop button The time will begin to flash in the display To re start the walking belt press the Start button or the Speed increase button Change the incline of the treadmill as desired To change the incline of the treadmill press the Incline increase or decrease button or one of the numbered 1 Step Incline buttons Each time you press one of the buttons the treadmill will gradu ally adjust to the selected incline setting Follow your progress with the displays As you walk or run on the treadmill the display can show the following workout information The elapsed time The distance that you have walked or run The workout intensity bar The approximate number of calories you have burned The incline level of the treadmill The number of vertical feet you have climbed The speed of the walking belt Your heart rate see step 6 on page 18 The matrix The matrix offers several display tabs Press the increase and decrease buttons next to the Enter
7. user s movement may affect the accuracy of heart rate readings The heart rate monitor is in tended only as an exercise aid in determining heart rate trends in general 20 21 22 23 24 Never leave the treadmill unattended while it is running Always remove the key unplug the power cord and press the power switch into the off position when the treadmill is not in use See the drawing on page 5 for the location of the power switch Do not attempt to raise lower or move the treadmill until it is properly assembled See ASSEMBLY on page 7 and HOW TO FOLD AND MOVE THE TREADMILL on page 22 You must be able to safely lift 45 Ibs 20 kg to raise lower or move the treadmill When folding or moving the treadmill make sure that the storage latch is holding the frame securely in the storage position Never insert any object into any opening on the treadmill Inspect and properly tighten all parts of the treadmill regularly 25 26 27 DANGER Always unplug the power cord immediately after use before clean ing the treadmill and before performing the maintenance and adjustment procedures described in this manual Never remove the motor hood unless instructed to do so by an authorized service representative Servic ing other than the procedures in this manual should be performed by an authorized ser vice representative only This treadmill is intended for home use only Do not use this
8. x 3 4 Truss Head Screw 19 move the Reed Switch slightly and then re tighten the Screw Reattach the Motor Hood not shown with the five 8 x 3 4 Screws not shown and run the treadmill for a few minutes to check for a correct speed reading SYMPTOM The incline of the treadmill does not change correctly a Hold down the Stop button and the Speed increase button insert the key into the console and then release the Stop button and the Speed increase button Press the Stop button and then press the Incline increase or decrease button The treadmill will automatically rise to the maximum incline level and then return to the minimum level This will re calibrate the incline system If the incline does not begin calibrating press the Stop button again and then press the Incline increase or decrease button again When the incline is calibrated remove the key from the console SYMPTOM The walking belt slows when walked on a Use only a single outlet surge suppressor that meets all of the specifications described on page 14 24 b d If the walking belt is overtightened treadmill per formance may decrease and the walking belt may become damaged Remove the key and UNPLUG THE POWER CORD Using the hex key turn both idler roller screws counterclockwise 1 4 of a turn When the walking belt is p
9. 4 Bolt 1 2 Nut Hood Clip 8 x 3 4 Truss Head Screw 3 8 x 1 3 4 Bolt 3 8 Locknut Incline Motor Spacer 1 4 x 3 8 Screw 8 x 1 2 Screw 5 16 x 1 1 4 Bolt Left Speaker Cover 5 16 x 1 3 4 Bolt 5 16 Washer 5 16 Nut Right Speaker Cover Pulse Crossbar 1 4 x 2 Screw 8 x 1 Tek Screw Hex Key 5 32 Hex Key Platform Cushion Left Foot Rail Latch Warning Decal Walking Platform Walking Belt Belt Guide Rubber Spacer Drive Roller Pulley Magnet Reed Switch Clamp Drive Motor Belt Drive Motor Frame Spacer Frame Right Foot Rail Key No Qty 2 NaNe ON HHHHHOHHAaHNDHIARNMPHHHHBHBHHaSHaNH_NDHiHeHWwH HH ae NH H RAH as Model No NTL61011 0 R0512A Description Storage Latch Right Rear Foot Left Rear Foot 8 x 1 2 Ground Screw 8 x 1 2 Controller Screw Idler Roller Motor Hood Incline Frame Spacer Incline Frame Incline Motor Controller Ground Wire Controller Wire Tie Belly Pan Plate Power Switch Power Cord Grommet Belly Pan Upright Cap Upright Wire Left Handrail Right Handrail Left Base Cover Right Base Cover Left Upright Right Upright Base Cap Caution Decal Base Pad Base Wheel Key Clip Console Base Module Housing Not Used Console Console Frame Access Door Console Ground Wire Console Back Console Wire Tie Not Used Left Speaker Grill Base Pad Spacer Reed Switch Console Clamp Left Tray Right Tray Right Speaker Grill User s Manual Note
10. 4 IMPORTANT The treadmill is not compat the key the demo mode is turned on To turn off ible with GFCl equipped outlets and may not be the demo mode hold down the Stop button for a compatible with AFCl equipped outlets few seconds If the displays are still lit see THE INFORMATION MODE on page 21 to turn off the After the power cord has been plugged make demo mode sure that the key is inserted into the console SYMPTOM The displays of the console do not c Check the power switch located on the treadmill function properly frame near the power cord If the switch protrudes as shown the switch has tripped To reset the a Remove the key from the console and UNPLUG power switch wait for five minutes and then press THE POWER CORD the switch back in Remove the five 8 x 3 4 Screws 6 Carefully slide the Motor Hood 57 off Tripped SYMPTOM The power turns off during use a Check the power switch see the drawing above If the switch has tripped wait for five minutes and then press the switch back in b Make sure that the power cord is plugged in If the power cord is plugged in unplug it wait for five minutes and then plug it back in 23 Locate the Reed Switch 95 and the Magnet 44 on the left side of the Pulley 43 Turn the Pulley until the Magnet is aligned with the Reed Switch Make sure that the gap between the Magnet and the Reed Switch is about 1 8 in 3 mm If necessary loosen the 8
11. 70 into the Left Handrail Attach the console assembly to the brackets on the Handrails 71 72 with two 5 16 x 1 Screws 7 and two 5 16 Star Washers 8 Start both Screws and then tighten them 11 10 Attach the two Console Clamps 96 to the con sole assembly with four 8 x 3 4 Screws 6 Console Assembly See step 3 Tighten all six 3 8 x 4 Screws 4 11 Identify the Left and Right Trays 97 98 which are marked L and R Orient the Trays as 1 Console shown and attach each Tray with four 8 x 3 4 Assembly Screws 6 Start all of the Screws before tightening them Be careful not to over tighten the Screws 12 12 Raise the Frame 49 to the position shown Have a second person hold the Frame until this step is completed Orient the Storage Latch 51 so that the large barrel and the latch knob are oriented as shown Attach the lower end of the Storage Latch 51 to the Base 80 with a 3 8 x 2 Bolt 12 and a 3 8 Nut 3 Attach the upper end of the Storage Latch 51 to the Frame 49 with a 3 8 x 2 Bolt 12 anda 3 8 Nut 3 Wii A n 13 Attach a Wheel 81 to the Base 80 with a 3 8 x 2 1 2 Bolt 2 and a 3 8 Nut 3 Do not over tighten the Nut the Wheel must t
12. Specifications are subject to change without notice For information about ordering replacement parts see the back cover of this manual These parts are not illustrated EXPLODED DRAWING A Model No NTL61011 0 R0512A 28 EXPLODED DRAWING B Model No NTL61011 0 R0512A 29 EXPLODED DRAWING C Model No NTL61011 0 R0512A 30 EXPLODED DRAWING D Model No NTL61011 0 R0512A 31 ORDERING REPLACEMENT PARTS To order replacement parts please see the front cover of this manual To help us assist you be prepared to provide the following information when contacting us the model number and serial number of the product see the front cover of this manual the name of the product see the front cover of this manual the key number and description of the replacement part s see the PART LIST and the EXPLODED DRAWING near the end of this manual LIMITED WARRANTY IMPORTANT You must register this product within 30 days of the purchase date to avoid added fees for service needed under warranty Go to www nordictrackservice com registration ICON Health amp Fitness Inc ICON warrants this product to be free from defects in workmanship and material under normal use and service conditions The frame is warranted for a lifetime The drive motor is warranted for twenty five 25 years from the date of purchase Parts and labor are warranted for one 1 year from the date of purchase This warranty extends onl
13. TANT To satisfy exposure compliance requirements the antenna and transmitter in the iFit Live module must be at least 8 in 20 cm from all persons and must not be near or connected to any other antenna or transmitter Select a user If more than one user is registered you can switch users in the iFit Live main screen Press the in crease and decrease buttons next to the Enter but ton to select a user Select an iFit Live workout To select an iFit Live workout press one of the iFit Live buttons Before some workouts will download you must add them to your schedule on www iFit com Press the iFit Live button to download the next workout in your schedule Press the My Trainer button the My Maps button the World Tour but ton or the Event Training button to download the next workout of that type in your schedule Press the Compete button to compete in a race that you have previously scheduled For more information about the iFit Live workouts please see www iFit com When you select an iFit Live workout the display will show the duration of the workout the distance you will walk or run and the approximate number of calories you will burn The display may also show the name of the workout If you select a competition workout the display will count down to the begin ning of the race Note Each iFit Live button can also run two demo workouts To use the demo workouts remove the iFit Live module from the console
14. Upright Wire Assembly requires the following tools the included hex keys one adjustable wrench one Phillips screwdriver scissors needlenose pliers To avoid damaging parts do not use power tools 2 Identify the Left Upright 75 which is marked Left Have a second person hold the Left Upright near the Base 80 See the inset drawing Tie the wire tie in the Left Upright 75 securely around the end of the Upright Wire 70 Then insert the Upright Wire into the lower end of the Left Upright as you pull the other end of the wire tie through the Left Upright With the help of a second person hold the Left Upright 75 against the Base 80 Be care ful not to pinch the wires Partially tighten three 3 8 x 4 Screws 4 with three 3 8 Star Washers 5 into the Left Upright and the Base do not fully tighten the Screws yet Attach the Right Upright not shown in the same way Note There are no wires on the right side 4 5 Identify the Left and Right Base Covers 73 74 which are marked L and R Slide the Left and Right Base Covers onto the Left and Right Uprights 75 76 as shown Identify the Left Handrail 71 which is marked Left If there is a wire in the Left Handrail re move and discard it Hold the Left Handrail 71 near the Left Upright 75 Insert the wire tie on the Upright Wire 70 through the bottom and out of the end of the Left Handra
15. and press one of the iFit Live buttons 5 Start the workout See step 3 on page 19 During some workouts the voice of a personal trainer will guide you through your workout You can select an audio setting for your personal trainer see THE INFORMATION MODE on page 21 To stop the workout at any time press the Stop button The time will begin to flash in the display To resume the workout press the Start button or the Speed increase button The walking belt will begin to move at the speed setting for the first seg ment of the workout When the next segment of the workout begins the treadmill will automatically adjust to the speed and incline settings for the next segment Follow your progress with the displays See step 5 on page 17 The My Trail tab will show a map of the trail you are walking or running or it will show a track and the number of laps you complete During a competition workout the Compete tab will show your progress in the race As you race the top line in the matrix will show how much of the race you have completed The other lines will show your top four competitors The end of the matrix represents the end of the race N Measure your heart rate if desired See step 6 on page 18 When you are finished exercising remove the key from the console See step 7 on page 18 For more information about the iFit Live mode go to www iFit com 20 THE INFORMATION MODE The console features an
16. astic To prevent damage to the walking platform wear clean athletic shoes while using the treadmill The first time the tread mill is used observe the alignment of the walking belt and center the walking belt if necessary see page 25 Note The console can display speed and distance in either miles or kilometers To find out which unit of measurement is selected or to change the unit of mea surement see THE INFORMATION MODE on page 21 For simplicity all instructions in this section refer to miles 15 HOW TO TURN ON THE POWER IMPORTANT If the treadmill has been exposed to cold temperatures allow it to warm to room tem perature before turning on the power If you do not do this you may damage the console displays or other electrical components Plug in the power cord see page 14 Next locate the Ss power switch on the tread mill frame near the power Reset cord Make sure that the switch is in the reset position IN IMPORTANT The console features a display demo mode designed to be used if the treadmill is dis played in a store If the displays light as soon as you plug in the power cord and press the power switch into the reset position the demo mode is turned on To turn off the demo mode hold down the Stop button for a few seconds If the displays remain lit see THE INFORMATION MODE on page 21 to turn off the demo mode Next stand on the foot rails of the tread Ke mill Find the cli
17. clusion or limitation of incidental or consequential damages Accordingly the above limitation may not apply to the customer The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set forth herein Some states do not allow limitations on how long an implied warranty lasts Accordingly the above limitation may not apply to the customer This warranty provides specific legal rights the customer may have other rights that vary from state to state ICON Health amp Fitness Inc 1500 S 1000 W Logan UT 84321 9813 Part No 315787 R0512A Printed in China 2012 ICON IP Inc
18. et i E OE eee deb eee a oe ae 26 PART EIS tance mane a 27 EXPLODED DRAWING s ihi ata be epee eed cen robe 28 ORDERING REPLACEMENT PARTS Back Cover LIMITED WARRANTY sii cae Gabe e a Bnd done ee Back Cover WARNING DECAL PLACEMENT This drawing shows the locations of the warning AWARNING decals If a decal is missing or illegible call the 2 Protect yourself and others from risk of serious telephone number on the front cover of this injury Read the users manual and request a free replacement decal Apply the decal in the location shown Note The decals may not be shown at actual size dizz breath Fully engage storage latch ad mi A CAUTION KEEP HANDS AND FEET AWAY RS FROM THIS AREA WHILE THE TREADMILL IS IN OPERATION ys wear athletic shoes while operating treadmill NORDICTRACK is a registered trademark of ICON IP Inc 2 IMPORTANT PRECAUTIONS A WARN NG To reduce the risk of serious injury read all important precations and in structions in this manual and all warnings on your treadmill before using your treadmill ICON as sumes no responsibility for personal injury or property damage sustained by or through the use of this product 1 10 11 Before beginning any exercise program con sult your physician This is especially impor tant for persons over age 35 or persons
19. ets of plastic from the metal contacts if nec essary In addi tion make sure that your hands are clean Contacts To measure your heart rate stand on the foot rails and hold the metal contacts on the handrails for approximately ten seconds avoid moving your hands When your pulse is detected a heart symbol in the calorie display will flash each time your heart beats one or two dashes will appear and then your heart rate will be shown For the most accurate heart rate reading continue to hold the contacts for about 15 seconds 7 When you are finished exercising remove the key from the console Step onto the foot rails press the Stop button and adjust the incline of the treadmill to the lowest setting The incline must be at the lowest set ting or you may damage the treadmill when you fold it to the storage position Next remove the key from the console and put it in a secure place When you are finished using the treadmill press the power switch into the off position and unplug the power cord IMPORTANT If you do not do this the treadmill s electrical components may wear prematurely HOW TO USE THE STEREO SOUND SYSTEM To play music or audio books through the console s stereo speakers you must connect your MP3 player CD player or other personal audio player to the con sole through the MP3 jack Plug one end of your audio wire into the audio jack on the console Plug the other end into a jack on y
20. gment Note The same speed setting and or incline setting may be programmed for con secutive segments During the workout the profiles on the speed and incline tabs will show your progress The flashing segment of the profile represents the current segment of the workout The height of the flashing segment indicates the speed or incline setting for the current segment At the end of each segment a series of tones will sound and the next segment of the profile will begin to flash If a differ ent speed and or incline setting is programmed for the next segment the treadmill will automatically adjust to the new speed and or incline setting Current Segment 19 The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends The walking belt will then slow to a stop Note The calorie goal is an estimate of the number of calories that you will burn during the workout The actual number of calories that you burn will depend on your metabolic rate In addition if you manually change the speed or incline of the treadmill during the workout the number of calories you burn will be affected If the speed or incline setting is too high or too low at any time during the workout you can manu ally override the setting by pressing the Speed or Incline buttons however when the next segment of the workout begins the treadmill will auto matically adjust to the speed a
21. her it is functioning properly Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill and serious injury to users Plug in the Power Cord The treadmill must be grounded If it should malfunc tion or break down grounding provides a path of least resistance for electric current to reduce the risk of elec tric shock The treadmill power cord has a plug witha grounding pin see drawing 1 on this page A DANGER Improper connection of the power cord increases the risk of elec tric shock Do not modify the plug if it will not fit an outlet have a proper outlet installed by a qualified electrician If you are unsure whether the treadmill is properly grounded contact a qualified electrician Plug the power cord into a surge suppressor and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances The outlet must be on a 14 nominal 120 volt circuit capable of carrying 15 or more amps To avoid overloading the circuit do not plug other electrical devices except for low power devices such as cell phone chargers into the surge suppressor or into an outlet on the same circuit IMPORTANT The treadmill is not compat ible with GFCl equipped outlets and may not be compatible with AFCl equipped outlets Grounded Outlet Grounding Pin A temporary adapter may be used to connec
22. ic exercise 165 155 145 145 138 130 125 120 115 140 130 125 115 Y 125 118 110 103 110 105 95 90 vw 20 30 40 50 60 70 80 To find the proper intensity level find your age at the bottom of the chart ages are rounded off to the near est ten years The three numbers listed above your age define your training zone The lowest number is the heart rate for fat burning the middle number is the heart rate for maximum fat burning and the highest number is the heart rate for aerobic exercise 26 Burning Fat To burn fat effectively you must exer cise at a low intensity level for a sustained period of time During the first few minutes of exercise your body uses carbohydrate calories for energy Only after the first few minutes of exercise does your body begin to use stored fat calories for energy If your goal is to burn fat adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone For maximum fat burning exercise with your heart rate near the middle number in your training zone Aerobic Exercise If your goal is to strengthen your cardiovascular system you must perform aerobic exercise which is activity that requires large amounts of oxygen for prolonged periods of time For aerobic exercise adjust the intensity of your exercise until your heart rate is near the highest number in your training zone WORKOUT GUIDELINES Warming Up Start with 5 to 10 minu
23. il as shown Then pull the Upright Wire through the Left Handrail Attach the Left Handrail 71 to the Left Upright 75 with two 3 8 x 3 1 2 Screws 9 and two 3 8 Star Washers 5 Make sure not to pinch the Upright Wire 70 Start both Screws but do not tighten them yet 6 Attach the Right Handrail 72 to the Right Upright 76 with two 3 8 x 3 1 2 Screws 9 and two 3 8 Star Washers 5 Start both Screws but do not tighten them yet 7 Insert the Console Frame 87 into the Handrails 71 72 Attach the Console Frame with the four 1 4 x 1 Screws 10 Start all four Screws and then tighten them Be careful not to pinch the Upright Wire not shown Firmly tighten the four 3 8 x 3 1 2 Screws 9 10 8 With the help of a second person hold the con sole assembly near the Left Handrail 71 and the Right Handrail not shown Console Assembly Connect the Upright Wire 70 to the console wire See the inset drawing The connectors should slide together easily and snap into place If they do not turn one connector and try again IF YOU DO NOT CONNECT THE CON NECTORS PROPERLY THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON A 2 THE POWER Then remove the wire tie from 4 Console the Upright Wire i Console Wire 9 Set the console assembly on the Left and Right Handrails 71 72 Make sure that no wires Console are pinched Insert the excess Upright Wire Assembly
24. information mode that keeps track of treadmill information and allows you to person alize console settings To select the information mode hold down the Stop button while inserting the key into the console and then release the Stop button When the information mode is selected the following information will be shown The time display will show the total number of hours the treadmill has been used The distance display will show the total number of miles or kilometers that the walking belt has moved The lower section of the display will show the status of an iFit Live module If an iFit Live module is connected the display will show the words WIFI MODULE If a USB module is connected the display will show the words USB SD MODULE If no module is connected the display will show the words NO IFIT MODULE While the information mode is selected the matrix will display several optional screens Press the decrease button next to the Enter button to select each of the following screens 1 UNITS To change the unit of measurement press the Enter button To view distance in miles select ENGLISH To view distance in kilometers select METRIC DEMO The console features a display demo mode designed to be used if the treadmill is dis played in a store While the demo mode is turned on the console will function normally when you plug in the power cord press the power switch into the reset position and insert the key into the con
25. ly lower the treadmill HOW TO LOWER THE TREADMILL FOR USE 1 See drawing 2 Hold the upper end of the treadmill with your right hand Then pull the latch knob to the left and hold it IMPORTANT Do not turn the latch knob If necessary push the frame forward slightly Pivot the frame downward a few inches and release the latch knob See drawing 1 at the left Hold the metal frame firmly with both hands and lower it to the floor CAUTION Do not hold the frame by the plastic foot rails and do not drop the frame Bend your legs and keep your back straight TROUBLESHOOTING Most treadmill problems can be solved by following Remove the key from the console and then the simple steps below Find the symptom that reinsert it applies and follow the steps listed If further assis tance is needed see the front cover of this manual Ifthe treadmill still will not run please see the front cover of this manual SYMPTOM The power does not turn on SYMPTOM The console displays remain lit when a Make sure that the power cord is plugged into a you remove the key from the console surge suppressor and that the surge suppressor is plugged into a properly grounded outlet see page a The console features a display demo mode de 14 Use only a single outlet surge suppressor that signed to be used if the treadmill is displayed in a meets all of the specifications described on page store If the displays remain lit when you remove 1
26. nd enjoyable When the manual mode of the console is selected you can change the speed and incline of the treadmill with the touch of a button As you exercise the console will display instant exercise feedback You can even measure your heart rate using the handgrip heart rate monitor In addition the console offers twenty onboard work outs ten calorie workouts and ten distance workouts Each workout automatically controls the speed and incline of the treadmill as it guides you through an ef fective exercise session The console also features an iFit Live mode that en ables the treadmill to communicate with your wireless network through an optional iFit Live module With the iFit Live mode you can download personalized work outs create your own workouts track your workout results race against other runners and access many other features To purchase an iFit Live module at any time go to www iFit com or call the telephone number on the front cover of this manual You can even listen to your favorite workout music or audio books with the console s premium stereo sound system while you get in shape To turn on the power see page 16 To use the man ual mode see page 16 To use the stereo sound system see page 18 To use an onboard workout see page 19 To use an iFit Live workout see page 20 To use the information mode see page 21 IMPORTANT If there is a sheet of plastic on the console remove the pl
27. nd incline set tings for the next segment To stop the workout at any time press the Stop button The time will begin to flash in the display To resume the workout press the Start button or the Speed increase button The walking belt will begin to move at 1 mph When the next segment of the workout begins the treadmill will automatically adjust to the speed and incline settings for the next segment Follow your progress with the displays See step 5 on page 17 The display will show the time remaining in the workout instead of the elapsed time Measure your heart rate if desired See step 6 on page 18 When you are finished exercising remove the key from the console See step 7 on page 18 HOW TO USE AN IFIT LIVE WORKOUT Note To use an iFit Live workout you must have an optional iFit Live module To purchase an iFit Live module at any time go to www iFit com or call the telephone number on the front cover of this man ual You must also have access to a computer with a USB port and an internet connection In addition you must have access to a wireless network including an 802 11b router with SSID broadcast enabled hidden networks are not supported An Fit com membership is also required 1 Insert the key into the console See HOW TO TURN ON THE POWER on page 16 2 Insert the iFit Live module into the console To insert the iFit Live module see the instructions included with the iFit Live module IMPOR
28. number following the key number is the quantity used for assembly Note If a part is not in the hardware kit check to see if it is preat tached Extra hardware may be included 5 16 St Washer 8 2 3 8 Star 3 8 Nut 3 4 Washer 5 10 8 x 3 4 Screw 5 1 6 x 1 1 4 x 1 Screw 7 2 Screw 10 4 3 8 x 2 Bolt 12 2 3 8 x 2 1 2 Bolt 2 2 3 8 x 3 1 2 Screw 9 4 3 8 x 4 Screw 4 6 ASSEMBLY 1 e Assembly requires two persons Place all parts in a cleared area and remove the packing materials Do not dispose of the packing materials until you finish all assembly steps The underside of the walking belt is coated with high performance lubricant After shipping there may be some lubricant on top of the walking belt or on the shipping carton This is normal If there is lubricant on top of the walking belt wipe it off with a soft cloth and a mild non abrasive cleaner To identify small parts see page 6 Make sure that the power cord is unplugged Locate the Upright Wire 70 bundled around the front of the Base 80 beneath the Belly Pan 68 Cut the plastic tie securing the Upright Wire Route the Upright Wire into the Base and out of the indicated hole Press a Base Cap 77 into each side of the Base 80 See the inset drawing Cut the plastic tie near the Upright Wire 70 Be careful not to damage the
29. our MP3 player CD player or other personal audio player Make sure that the audio wire is fully inserted Next press the Play button on your MP3 player CD player or other personal audio player Adjust the vol ume on your personal audio player or press the vol ume increase and decrease buttons on the console If you are using a personal CD player and the CD skips set the CD player on the floor or another flat sur face instead of on the console 18 HOW TO USE AN ONBOARD WORKOUT 1 Insert the key into the console See HOW TO TURN ON THE POWER on page 16 Select an onboard workout To select an onboard workout press either the Calorie button or the Distance button repeatedly When you select an onboard workout the display will show the duration the distance the name the maximum speed setting and the maximum incline setting of the workout In addition a profile of the speed settings of the workout will appear in the ma trix If you select a calorie workout the approximate number of calories you will burn will appear in the name of the workout Start the workout Press the Start button or the Speed increase button to start the workout A moment after you press the button the treadmill will automatically adjust to the first speed and incline settings of the workout Hold the handrails and begin walking Each workout is divided into segments One speed setting and one incline setting are programmed for each se
30. p _ y attached to the key and slide the clip Clip onto the waistband of your clothes Then insert the key into the console After a mo ment the displays will the console adjust the position of the clip Note The first time you insert the key into the console the incline will automatically rise to the maximum in cline level and then return to the minimum incline level gt light IMPORTANT In an emergency the key can be pulled from the console causing the walking belt to slow to a stop Test the clip by carefully taking a few steps backward if the key is not pulled from 16 HOW TO USE THE MANUAL MODE Insert the key into the console See HOW TO TURN ON THE POWER at the left Select the manual mode If the manual mode is not selected press the Manual Control button to select the manual mode Start the walking belt To start the walking belt press the Start button the Speed increase button or one of the numbered 1 Step Speed buttons If you press the Start button or the Speed increase button the walking belt will begin to move at 1 mph As you exercise change the speed of the walking belt as desired by pressing the Speed in crease and decrease buttons Each time you press one of the buttons the speed setting will change by 0 1 mph if you hold down the button the speed setting will change in increments of 0 5 mph Note After you press the buttons it may take a moment for
31. roperly tightened you should be able to lift each edge of the walking belt 2 to 3 in 5 to 7 cm off the walking platform Be careful to keep the walking belt centered Then plug in the power cord insert the key and run the treadmill for a few minutes Repeat until the walk ing belt is properly tightened Idler Roller Screws Your treadmill features a walking belt coated with high performance lubricant IMPORTANT Never apply silicone spray or other substances to the walking belt or the walking platform unless in structed to do so by an authorized service rep resentative Such substances may deteriorate the walking belt and cause excessive wear If you suspect that the walking belt needs more lubri cant see the front cover of this manual If the walking belt still slows when walked on see the front cover of this manual SYMPTOM The walking belt is off center or slips when walked on a If the walking belt is off center first remove the key and UNPLUG THE POWER CORD If the walking belt has shifted to the left use the hex key to turn the left idler roller screw clockwise 1 2 of a turn if the walking belt has shifted to the right turn the left idler roller screw counterclock wise 1 2 of a turn Be careful not to overtighten the walking belt Then plug in the power cord insert the key and run the treadmill for a few minutes Repeat until the walking belt is centered 25 If the walking belt slips when walked
32. sole However when you remove the key the displays will remain lit although the buttons will not function If the demo mode is turned on the word ON will appear in the matrix To turn on or turn off the demo mode press the Enter button 21 3 CONTRAST LVL Press the Incline increase and decrease buttons to adjust the contrast level of the display If a module is connected you may also select the following screen 4 TRAINER VOICE To turn on or turn off the voice of the personal trainer press the Enter button If an iFit Live module is connected you may also select the following screens 5 DEFAULT MENU The default menu will appear when you insert the key into the console or when you press the Home button Press the Enter button repeatedly to select the manual main screen or the iFit Live screen as the default menu CHECK WIFI STATUS Press the Enter button to check the status of your iFit Live module The lower display will show the software version number the network SSID the network encryption type the connection status the wireless signal strength the IP address of the module the number of registered users and their names the results of the DNS lookup and the status of the iFit Live server SEND RECEIVE DATA To send and receive workouts workout logs and updates press the Enter button When the process is finished the words TRANSFERS DONE will appear in the display To exit the information mode remove
33. t the surge sup pressor to a 2 pole receptacle if a properly grounded outlet is not available The lug or wire extending from the adapter must be connected with a metal screw to a permanent ground such as a properly grounded outlet box cover Some 2 pole receptacle outlet box covers are not grounded Before using an adapter contact a quali fied electrician to determine whether the outlet box cover is grounded The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician CONSOLE DIAGRAM crave O LUIS i AVAL SL lt i CALORIES Mituve VERT FEET powered by Google maps ENTER A DISPLAY 6 ty Google maps A 3 Event Training Compete ONBOARD CALORIE AOS DISTANCE 53 J lt MANUAL CONTROL 0 J 1 WARNING stand on foot rails before starting treadmill read and understand the user s manual all instruc tions and the warnings bi away IMPORTANT Incline must be set at lowest level before folding treadmill into storage position 9 8 World Tour Compatible My Trainer My Maps 6 a eG E 1STEP INCLINE 1STEP SPEED FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec tive a
34. tes of stretch ing and light exercise A warm up increases your body temperature heart rate and circulation in preparation for exercise Training Zone Exercise Exercise for 20 to 30 min utes with your heart rate in your training zone During the first few weeks of your exercise program do not keep your heart rate in your training zone for longer than 20 minutes Breathe regularly and deeply as you exercise never hold your breath Cooling Down Finish with 5 to 10 minutes of stretch ing Stretching increases the flexibility of your muscles and helps to prevent post exercise problems EXERCISE FREQUENCY To maintain or improve your condition complete three workouts each week with at least one day of rest between workouts After a few months of regular exer cise you may complete up to five workouts each week if desired Remember the key to success is to make exercise a regular and enjoyable part of your everyday life PART LIST Key No Qty 4 2 4 6 ho N 5 2 ANAL LLANO LAA 4242 MB ABB 5 5 Description 8 x 1 2 Ground Screw 3 8 x 2 1 2 Bolt 3 8 Nut 3 8 x 4 Screw 3 8 Star Washer 8 x 3 4 Screw 5 16 x 1 Screw 5 16 Star Washer 3 8 x 3 1 2 Screw 1 4 x 1 Screw 3 x 1 4 Screw 3 8 x 2 Bolt Speaker 1 4 x 2 1 2 Screw 3 8 x 1 3 8 Bolt 1 2 x 2 1
35. treadmill in a commercial rental or institutional setting Over exercising may result in serious injury or death If you feel faint or if you experience pain while exercising stop immediately and cool down SAVE THESE INSTRUCTIONS BEFORE YOU BEGIN Thank you for selecting the new NORDICTRACK T5 7 treadmill The T5 7 treadmill provides an impressive selection of features designed to make your workouts at home more effective and enjoyable For your benefit read this manual carefully before you use the treadmill If you have questions after reading this manual please see the front cover of this Length 6 ft 183 cm Width 2 ft 10 in 86 cm Accessory Tray Walking Belt Foot Rail Idler Roller Adjustment Screws manual To help us assist you note the product model number and serial number before contacting us The model number and the location of the serial number decal are shown on the front cover of this manual Before reading further please familiarize yourself with the parts that are labeled in the drawing below Console Heart Rate Monitor Handrail Key Clip Hood we Power Switch 959 Power Cord Wheel Platform Cushion PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly The number in parentheses below each draw ing is the key number of the part from the PART LIST near the end of this manual The
36. urn freely Attach the other Wheel 81 to the other side of the Base 80 in the same way YE MN ANNO Lower the Frame not shown see HOW TO LOWER THE TREADMILL FOR USE on page 22 14 Make sure that all parts are properly tightened before you use the treadmill If there are sheets of plas tic on the treadmill decals remove the plastic To protect the floor or carpet place a mat under the treadmill Note Extra hardware may be included Keep the included hex key in a secure place the hex key is used to adjust the walking belt see pages 24 and 25 13 OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD Use a Surge Suppressor Your treadmill like other electronic equipment can be damaged by sudden voltage changes in your home s power Voltage surges spikes and noise interfer ence can result from weather conditions or from other appliances being turned on or off To decrease the risk of damaging the treadmill always use a surge suppressor with the treadmill To purchase a surge suppressor see precaution 12 on page 3 Use only a surge suppressor that is UL 1449 listed as a transient voltage surge suppressor TVSS The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules The surge suppressor must also be electri cally rated for 120 volts AC and 15 amps There must be a monitoring light on the surge suppressor to indi cate whet
37. with pre existing health problems It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions Use the treadmill only as described Keep the treadmill indoors away from mois ture and dust Do not put the treadmill in a garage or covered patio or near water Place the treadmill on a level surface with at least 8 ft 2 4 m of clearance behind it and 2 ft 0 6 m on each side Do not place the treadmill on any surface that blocks air openings To protect the floor or carpet from damage place a mat under the treadmill Do not operate the treadmill where aerosol products are used or where oxygen is being administered Keep children under age 12 and pets away from the treadmill at all times The treadmill should be used only by per sons weighing 325 Ibs 147 kg or less Never allow more than one person on the treadmill at a time Wear appropriate exercise clothes while us ing the treadmill Do not wear loose clothes that could become caught in the treadmill Athletic support clothes are recommended for both men and women Always wear ath letic shoes Never use the treadmill with bare feet wearing only stockings or in sandals Plug the power cord into a surge suppressor not included and plug the surge suppres sor into an appropriate outlet see page 14 To avoid overloading the circuit do not plug 12 13 14 15 16
38. y to the original purchaser customer ICON s obligation under this warranty is limited to repairing or replacing at ICON s option the product through one of its authorized service centers All repairs for which warranty claims are made must be preauthorized by ICON If the product is shipped to a service center freight charges to and from the service center will be the customer s responsibility If replacement parts are shipped while the product is under warranty the customer will be responsible for a minimal handling charge For in home service the customer will be responsible for a minimal trip charge This warranty does not extend to freight damage to the product This warranty will automatically be voided if the product is used as a store display model if the product is purchased or transported outside the USA if all instructions in this manual are not followed if the product is abused or improperly or abnormally used or if the product is used for commercial or rental purposes No other warranty beyond that specifically set forth above is authorized by ICON ICON is not responsible or liable for indirect special or consequential damages arising out of or in con nection with the use or performance of the product damages with respect to any economic loss loss of property loss of revenues or profits loss of enjoyment or use or costs of removal or installation or other consequential damages of any kind Some states do not allow the ex
Download Pdf Manuals
Related Search