GR-3 Modem Upgrade R..
Contents
1. TOPCON POSITIONING SYSTEMS GR 3 Modem to GSM CDMA Upgrade installation Manual Part Number 7010 0822 Rev C Copyright Topcon Positioning Systems Inc November 2007 All contents in this manual are copyrighted by Topcon All rights reserved The information contained herein may not be used accessed copied stored displayed sold modified published distributed or otherwise reproduced without express written consent from Topcon Terms and Conditions Thank you for buying this Topcon product This manual has been prepared to assist you with the servicing of the product and its use maintenance is subject to these Terms and Conditions and any more fully set forth in an Operator s Manual Usage and Safety This product is designed for use service by professionals Always use safety precautions when operating servicing this or any Topcon product Copyrights All information contained in this Manual is the intellectual property of and copyrighted material of TPS All rights are reserved You may not use access copy store display create derivative works of sell modify publish distribute or allow any third party access to any graphics content information or data in this Manual without TPS express written consent and may only use such information for the care and operation of your Product The information and data in this Manual are a valuable asset of TPS and are developed by the expenditure of considerable work ti2. modem subassembly Insert the modem subassembly into the middle level of the card cage Insert modem subassembly into the card cage Step 7 Secure the middle level screw M3x5 metric machine screw Phillips stainless steel pan head into the card cage Step 8 Secure middle level screws Follow the directions in the GR 3 Assembly Manual to reinsert the card cage assembly P N 7010 0822 1 5 Installing the FH915 Modem Upgrade Notes 1 6 GR 3 Modem to GSM CDMA Upgrade Installation Manual Chapter 2 Installing the Digital UHF Modem Upgrade The GR 3 receiver is a multi frequency GPS receiver built to be the most advanced and compact receiver for the surveying market The following is a quick reference guide to the GR 3 Operator s Manual on installing the Digital UHF Modem Upgrade Chapter Contents Getting Started on page 2 2 Installing the Digital UHF Modem Module on page 2 3 P N 7010 0822 2 1 Installing the Digital UHF Modem Upgrade Getting Started You will need the following tools to complete the upgrade Bluetooth Antenna Cable Extraction Tool P N 34 850402 01 e Phillips screwdriver Manual and disassembly procedures before beginning to D Review all safety information in the GR 3 Operator s disassemble the GR 3 Be sure to record the IMEI number on the new GSM module for fu
3. which may apply to the Product Manual Conventions This manual uses the following conventions F rther information te note aboutthe Notification that an action has the potential to adversely affect system operation NOTE configuration maintenance or setup of a F datai system system performance data integrity or personal health l Supplementary information thateanhel Notification that an action will result in pp eme JUT OIA P system damage loss of data loss of you configure maintain or set up a system ae warranty or personal injury Supplementary information that can have gt an affect on system operation system lt gt Under no circumstances should this action performance measurements or personal be performed safety ECO 3181 TOC Table of Contents Chapter 1 Installing the FH915 Modem Upgrade c008 1 1 VCE SCALE annere er eea e e N ea 1 2 Parts LISE crennucsinunnunn nnn a nn kA n RNA RN 1 2 Installing the FH915 Modem Module eeseseeesserersererrererseeses 1 3 Chapter 2 Installing the Digital UHF Modem Upgrade 2 1 Getting Started dafi aaa a gece cath a ass 2 2 Parts EISE npea e ae E N T E 2 2 Installing the Digital UHF Modem Module scesereeerereresreren 2 3 P N 7010 0822 Table of Contents Notes il GR 3 Modem to GSM CDMA Upgrade Installation Manual Chapter 1 Installing the F
4. H915 Modem Upgrade The GR 3 receiver is a multi frequency GPS receiver built to be the most advanced and compact receiver for the surveying market The following is a quick reference guide to the GR 3 Operator s Manual on installing the FH915 Modem Upgrade Chapter Contents Getting Started on page 2 Installing the FH915 Modem Module on page 3 P N 7010 0822 1 1 Installing the FH915 Modem Upgrade Getting Started You will need the following tools to complete the upgrade Bluetooth Antenna Cable Extraction Tool P N 34 850402 01 e Phillips screwdriver Review all safety information in the GR 3 Operator s a gt Manual and disassembly procedures before beginning to disassemble the GR 3 Be sure to record the IMEI number on the new GSM module for future reference This number is needed to set More up telephone service for the GSM This number can also be accessed using Modem TPS Parts List Before you begin installing the GR 3 FH915 Modem Upgrade make sure your upgrade kit includes the items listed below Table 1 Upgrade Contents Qty Part Number Description 1 30 060001 01 2 16 040803 01 MODULE G24 GSM 850 900 1800 1900MHZ EDGE SPACER ROUND NYLON OD 4 X 3MM 2 16 040802 01 NUT HEX M2 STAINLESS STEEL 2 16 040801 01 SCR M2 0 X 8 PAN HEAD PHILLIPS 1 14 004061 01 CABLE UMP MMCxX RA 0 04M GR 3 Modem to GSM CDMA Upg
5. em to GSM CDMA Upgrade Installation Manual Installing the Digital UHF Modem Module P N 7010 0822 2 5 Installing the Digital UHF Modem Upgrade Notes 2 6 GR 3 Modem to GSM CDMA Upgrade Installation Manual
6. me and money and are the result of original selection coordination and arrangement by TPS Trademarks GR 3 and Topcon are trademarks or registered trademark of Topcon Positioning Systems Inc Windows and Outlook are registered trademarks of Microsoft Corporation InstallShield is a registered trademark of InstallShield Software Corporation The Bluetooth word mark and logos are owned by Bluetooth SIG Inc and any use of such marks by Topcon Positioning Systems Inc is used under license Other product and company names mentioned herein may be trademarks of their respective owners Disclaimer of Warranty EXCEPT FOR SUCH WARRANTIES AND LICENSES PROVIDED WITH THE PRODUCT THIS MANUAL AND THE PRODUCT ARE PROVIDED AS IS TOPCON AND ITS DISTRIBUTORS SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING PERFORMANCE OR USE OF THIS MATERIAL OR THE PRODUCT Please see the Operator s User s Manual for detailed information on warranties and the license agreement which may apply to the Product License Agreement Use of any computer programs or software supplied by Topcon or downloaded from the Topcon website in connection with the Product implies acceptance of the Terms and Conditions here and in the Operator s User s Manual Please see the Operator s User s Manual for detailed information on warranties and the license agreement
7. rade Installation Manual Installing the FH915 Modem Module Installing the FH915 Modem Module Follow the directions in the GR 3 Assembly Manual to remove the card cage assembly These steps walk you through installing the GSM module onto the GR 3 receiver Step Procedure Illustration Step 1 Remove the screw SCrew Remove the remaining middle level Step 2 Remove the modem subassembly Remove the modem subassembly P N 7010 0822 1 8 Installing the FH915 Modem Upgrade n e O me Procedure Illustration Connect the UMP MMCX RA cable to the FH915 modem module 2 2 2 5 2 28 2 cs ow Og 3 a 2 N o Place the FH915 module onto the modem subassembly using the two round nylon spacers E D 2 F G n O n EG os Soa gs amp a2 c qo a 2 N Secure the FH915 module using the 2 two screws M2 0x8 metric pan head S Phillips and the two nuts M2 metric 2 hex nut stainless steel provided o oa ae g S Before securing the FH lt gt 2 915 module make 5 sure the connectors are 2 3 completely aligned is with the modem re 2 N LF 1 4 GR 3 Modem to GSM CDMA Upgrade Installation Manual Installing the FH915 Modem Module Procedure Illustration a pd O W Connect the UMP MMCX RA cable to the modem subassembly Step 6 Connect the cable to the
8. ture reference This number is needed to set peda up telephone service for the GSM This number can also be accessed using Modem TPS Parts List Before you begin installing the GR 3 Digital UHF Modem Upgrade make sure your upgrade kit includes one of the items listed below Table 1 Upgrade Contents Qty Part Number Description 1 02 050915 02 PCBA ARWEST EURO GSM 1 02 050915 03 PCBA Digital UHF US GSM 1 02 0509 15 04 PCBA Digital UHF Sprint CDMA 1 02 050915 05 PCBA Digital UHF Verizon CDMA 2 2 GR 3 Modem to GSM CDMA Upgrade Installation Manual Installing the Digital UHF Modem Module Installing the Digital UHF Modem Module Follow the directions in the GR 3 Assembly Manual to remove the card cage assembly These steps walk you through removing the from the card cage Step Procedure Illustration Step 1 Remove the middle level screw screw Remove the remaining middle level Step 2 Remove the modem subassembly Remove the modem subassembly P N 7010 0822 2 3 Installing the Digital UHF Modem Upgrade E Insert the Digital UHF Modem module re I D gt A E o 5 a 2 N Secure the middle level screw Step 4 Secure middle level screw Follow the directions in the GR 3 Assembly Manual to reinsert the card cage assembly 2 4 GR 3 Mod
Download Pdf Manuals
Related Search