CD |Scale - American Weigh Scales Inc
Contents
1. 3 Press M key again 4 The LCD will flash CAL followed by the required calibration weight ie 500 for the CD 500 or 1000 for CD 1000 Add the required weight The display will show PASS then return to normal weighing mode 5 Put away cal weight press I O key to turn off scale the calibration is finished Repeat this process if scale is still displaying incorrect weight Please check the availability of weights at the store from which you have bought your scale V TROUBLESHOOTING The primary reasons for inaccuracy or malfunction are low batteries incorrect calibration overload or operating on an unstable surface Please keep this in mind and maintain and operate your scale property Display Elimination of errors lo or 88888 Change the batteries OUT2 Recalibrate the scale as shown above O LD You are overloading the scale O LD or LLLLL The delicate weighing load cells have been damaged by misusing the scale i e it was shocked dropped or overloaded You can try recalibrating the scale If the load cell has not been damaged too much it will work again after recalibration UNST Use the scale in a more stable position2. present 2 Place the scale on a flat surface and press the I O switch 3 Wait until 0 0 is displayed 4 Put the object s to be weighed on the weighing platform 5 Using the M key you can switch between weighing units Il TARE WEIGHING 1 Turn on scale as described above 2 Place the tare item on the platform 3 Press T and wait until 0 0 is displayed 4 Add the net weight item Ill COUNTING FUNCTION 1 Turn on the scale and wait until the LCD displays 0 0 2 Place a sample amount 25pcs 50pcs 75pcs or 100pcs of the quantity you wish to weigh and count onto the platform 3 Press and HOLD C key for 2 seconds the LCD will display 25 4 Press M key to select the sample amount of the item that you have put onto the platform 5 Press C key to confirm the above information the LCD will now display pcs in the corner to show that the scale is in counting mode 6 Remove the sample quantity from the platform 7 You now can place any amount of your item s on the scale and the LCD will display a count 8 You can switch between weighing mode or counting mode by press ing M or C key respectively IV CALIBRATION use 500g for CD 500 use 1000g for CD 1000 Calibration only needs to be performed if scale is not weighing properly 1 Turn the scale on and wait for 0 0 to be displayed then press and hold the M key for 3 seconds 2 Release the M key
3. CD Scale User Manual Compact Digital Scale CD 1000 1000x 0 1g CD 500 500x 0 1g CD Scale User s Manual Thank you for purchasing the American Weigh CD Scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care proper treatment it will provide years of reliable service Never load the scale with more than the maximum capacity since overloading can permanently damage it Avoid any exposure to extreme heat or cold your scale works best when operated at normal room temperature Always allow the scale to acclimate to normal room temperature for at least one hour before use Give your scale sufficient warm up time usually 30 seconds to allow the internal components a chance to stabilize before calibration Keep your scale in a clean environment dust dirt moisture vibration air cur rents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale Handle with care Gently apply all items to be weighed onto tray top Although this scale is designed to be quite durable try to avoid rough treatment as this may permanently damage the internal sensor Avoid shaking dropping or otherwise shocking the scale This is a precision instrument and must be handled with extreme care Only operate the scale ona stable vibration free surface I OPERATION 1 Remove the steel cover expansion tray before use if
Download Pdf Manuals
Related Search