Suprasson® PMax - Suprasson® PMax Lux
Contents
1. 1 Press the sT key on the front of the unit ref 14 or the multifunction foot control ref 34 to set the power to maximum The indicator lights up ref 7 and the display indicates the value of 10 in the selected range To exit Boost mode press the key on the front of the unit or press the multifunction foot control once more or change the power range Spray or dry 1 Press the key on the face of the unit ref 18 or the multifunction foot control ref 35 to activate irrigation In water supply mode controlling the water flow is via the connector ring on the Suprasson handpiece ref 47 __In irrigation kit mode controlling the water flow is via the flow limiter located on the pump ref 40 Memorizing the ultrasound power level 1 Select the desired power range ref 13 2 Change the power level with the keys ref 19 3 Press the memory key ref 15 The power display shows for one second to confirm memorization Recalling a level from memory 1 Press the key for the desired power range ref 13 The memorized value is displayed Refer to the Tipbook for power settings of Satelec tips Cleaning and disinfecting the device The casing of the Suprasson P Max as well as the cords should be cleaned and disinfected every day using alcohol or disinfectant dental wipes Cleaning disinfecting and sterilization of ultrasound systems In the rear of the handpiece an2. Suprasson PMax Suprasson PMax Lux User s manual e Notice d utilisation e Manual de uso Benutzerhandbuch Manuale d uso Handleiding voor de gebruiker a Illustrations 13a 13b 13c 13d 14 15 16 17 18 10 11 12 Illustrations Te Introduction ossen deens pees weer esertcseeasscsee es 1 2installation s eeose eneee reraosan Eeee 4 3 Starting and stopping the device 5 4 Using ultrasound mode 6 9 Maintenance sns ccs escsesbeschcavccshveousoceSesese es 7 6 Troubleshooting ossen ens een tee evene 8 7 Technical specifications 10 The Suprasson P Max is a multi clinical piezoelectric ultrasound generator that enables treatment to be carried out in optimal aseptic and sterile conditions Suprasson P Max is equipped with a Suprasson handpiece ultrasound Suprasson P Max Lux is equipped with a Suprasson Lux light handpiece ultrasound General characteristics Four ultrasound power ranges each adjustable with 10 levels Color display for visual and ergonomic representation of the power Boost function for instant selection of maximum power in the selected mode Memory for each of the four power modes for easy recall of a chosen power level Irrigation via the water supply with flow regulation on the handpiece connector Main functions on the multifunction foot control The Suprasson P Max is a multifunction device for scaling endod
3. Before being used for the first time it is Imperative to clean disinfect using alcohol or disinfectant dental wipes and or sterilize the accessories casing of the device handpiece tips keys etc e Recommended that the accessories should be plugged in and the spray operated for a few minutes to rinse the device s internal water circuits Important It is imperative that the water supply is turned off when leaving the dental practice Switching on the power 1 Set the power switch to the on position Il rep 25 The device automatically goes into standby mode the green indicator dj ref 8 on the front lights up The device is in energy saving mode To operate 1 Press the 6 rep 20 key on the front of the device The initialization phase lasting a few seconds is launched The information displayed is as follows any other values indicate malfunction Display the figure 88 is displayed Background color of the display bluish white Indicators they all light up At the end of the initialization phase the display will show one of the following By default low power mode is at level 5 ona green background no irrigation water supply selected light out in three seconds Suprasson P Max Lux enters standby mode automatically after nine minutes Or the last configuration used The device is ready to use Entering standby mode 1 Press the 6 rep 20 key The front
4. irrigation circuit waterproof o ring 1 15x1 is accessible and visible thanks to a groove of the rear socket This allows for easy replacement of the o ring in the case of damage or wearing You can replace it yourself or have it done After a number of disconnections connections and or sterilizations it is recommended to lubricate this o ring with dental instrument quality lubricant to maintain its efficiency and avoid internal leakage Without an irrigation kit Proceed as follows 1 Separate the Suprasson handpiece ref 45 from the cord ref 47 by pulling without turning 2 Unscrew the tip ref 44 from the Suprasson handpiece 3 Clean and sterilize the Suprasson handpiece and tip after each use With an irrigation kit It is imperative that all parts in contact with the solution should be carefully rinsed after treating each patient as follows 1 Disconnect the irrigation line from the kit 2 Immerse it in clean water 3 Press the pedal for one minute to rinse the Sterijoint the Suprasson handpiece and the tip 4 Disconnect the irrigation line from the Sterijoint and discard 5 Disconnect the Sterijoint unit ref 46 Suprasson handpiece ref 47 and tip ref 44 from the cord Take out and empty the reservoirs Disinfect them Sterilize the reservoirs and the Sterijoint in an autoclave 9 Clean the motor and peristaltic pump with alcohol every day ae Cleaning the f
5. the water inlet pipe 28 Fan Do not obstruct the fan at the risk of causing severe damage to the device 29 Power socket Connection to mains electricity is by a standard connector conforming to IEC 60 320 30 Fuse housing Contains the device s fuses Suprasson and Suprasson Lux handpieces Refer to the relevant instructions Multifunction foot control 31 Left pedal Activates rinsing without ultrasound When the irrigation kit is available pressing the pedal initiates rinsing syringe effect with a flow rate of about 120 ml min 32 Connector Connection of the device 33 Range of functions Each press selects one of the four power modes The ultrasound power setting used will be the one memorized or by default the factory setting the mid position value of 5 except for the top range which is set to 1 Check the display to view the function selected 34 Boost See notes relating to the key ref 14 35 Irrigation Irrigation selection on off ref 18 36 Right pedal e Ultrasound function selected activates ultrasound and associated functions that have been previously selected Irrigation kit It is fixed underneath the unit ref 39 The pump ref 42 sends ref 43 the contents of the selected reservoir ref 38 and 41 to the Suprasson handpiece ref 6 fitted with the Sterijoint It is possible to regulate the flow by turning the limiter located above the pump motor r
6. 13c e Orange background very high power ref 13d The range selected e a reminder is given by the color of the display backlighting e s programmed in the factory at level 5 except for the orange key which is programmed at level 1 and uses irrigation from the water supply The range may also be selected with the multifunction foot control see chapter on the multifunction foot control pedal 14 Boost sT Applies the power value 10 of the selected range the poast lights up A second press on the key exits the mode This mode can also be accessed from the multifunction foot control cannot be memorized and use must be occasional 15 Memory key amp Memorizes a power level for each of the four power ranges with the exception of switching on irrigation and Boost 16 Water supply key aan Pressing this key selects drinking water water supply as the irrigation solution The indicator lights up Irrigation will only take place after the spray or dry key ref 18 is pressed the rate of flow may be set via the handpiece connector The two keys 16 and 17 are mutually exclusive and may be memorized 17 Irrigation kit key j Pressing this key selects the irrigation Kit optional Irrigation will only take place after the spray or dry key ref 18 is pressed The rate of flow may be adjusted via the control knob on the pump The two keys 16 and 17 are mutually exclusive and may be memorized 18 Spray o
7. The figures displayed indicate power on the number 88 indicates the correct operation of the segments of the display Any other value signals a malfunction of the indicator see chapter troubleshooting e In use the ultrasound power level 1 to 10 for the range selected controlled by the keys Ref 19 when programming the length of time of inactivity before the device enters standby mode for Suprasson P Max Lux only the length of time before the light is switched off on the Suprasson Lux handpiece when ultrasound is no longer in use The following figure shows an example of the display from left to right power on in use setting the ultrasound power level and when programming light time limit 2 CS 10 Water supply indicator Lights when the a key is pressed ref 16 and indicates irrigation via the drinking water supply 11 Irrigation kit indicator f Lights when the ff key is pressed ref 17 and indicates irrigation via one of the two reservoirs 12 Spray or dry mode indicator Lights when the key is pressed ref 18 Sensitive control panel Is set out as follows 13 Ultrasound power range keys Each yellow green blue and orange key corresponds to an ultrasound power range from the weakest to the strongest as follows e Green background low power ref 13a e Yellow background intermediate power ref 13b e Blue background high power ref
8. e device enters standby mode To change this setting 1 Put the device into standby key 2 Press the yellow and blue keys together then the key while keeping the other keys depressed The display will indicate A Stop followed by a figure giving the current time delay in minutes 3 Release the keys 4 Set the time with the or keys The length of time can be set from no standby to 15 minutes The new value comes into effect when the device is restarted AC indicates that standby mode will be activated after 12 minutes The table below shows the value displayed according to the desired time delay in minutes Display min Display min A 0 A8 8 Al 1 A9 9 A2 2 AA 10 A3 3 AB 11 A4 4 AC 12 A5 5 AD 13 A6 6 AE 14 A7 7 AF 15 0 no standby Switching off the device 1 Set the on off switch to the 0 position Choosing the ultrasound power range 1 Select a power range by pressing one of the four keys green yellow blue orange ref 13 on the control panel By default the display indicates the color of the range selected at power setting 5 1 for high power and irrigation from the water supply Reminder the ultrasound power range may be selected with the multifunction foot control Setting ultrasound power Incremental setting 1 Press the key to increase ultrasound power or the key to decrease it from 1 to 10 by steps of 1 Setting the power to maximum geesr
9. ef 40 The selector ref 41 is used as follows e selector to the left left reservoir e _ selector to the right right reservoir e selector in the center both reservoirs closed The two reservoirs ref 38 are independent and are fixed on either side of the pump They can be sterilized in an autoclave The connector ref 37 links the irrigation kit to the device Recommendations For your safety connections water air and electricity should be carried out by an approved installer of dental equipment The device requires the following connections see technical specifications chapter Carry out the connection to the drinking water supply using an automatic cutoff valve of the Aquastop type or to the dental chair water supply Caution always turn off the water supply when you leave the dental practice Setting up the equipment Position the device in the place where it is going to be used e Connect the foot control rep 32 to the connector on the device rep 23 e Connect the optional equipment Team Up ref 21 irrigation kit ref 24 e Connect the water supply pipe with its filter to the connector located at the rear of the device ref 27 Connect the air supply pipe to the rear of the device ref 22 for Suprasson P Max Lux e Plug in the power socket ref 29 Open the supply taps water air This device should only be used by professionals dental practictioners and hygienists
10. ilters The water filter Cleaning the water filter must be done in relation to the hardness index of the water 1 Shut off the water at the tap on the water supply side and purge the circuit 2 Set the on off button to the O position and unplug the mains lead 3 Unscrew the two parts of the filter ref 48 and 50 using two 10mm open ended spanners 4 Extract and replace the cartridge ref 49 5 Reassemble by reversing the operation retightening the two parts of the filter ref 48 and 50 Air filter Refer to water filter section above Replacing the fuses Proceed as follows 1 Set the on off button to the O position ref 51 and unplug the mains lead ref 52 2 Insert the end of a screwdriver ref 53 in the slot to open the protective cover 3 Replace the fuses ref 54 with fuses of the same type and value 4 Push the fuse holder back into its housing Fan 1 2 Check regularly that the fan is free from dust Clean if necessary by gentle blowing after having disconnected the mains supply Fault Does not operate general No water but ultrasound working Water not atomized by the ultrasound Ultrasound too strong or too weak Possible cause Unplugged or defective mains cord Fuses blown Defective wall power outlet Device switched off 0 Foot control disconnected and or defective No water in the water supply Water inlet pipe not connected Incorrect spray
11. ng Option selection press buttons Halogen bulb 3 5 V 750 mA 15 000 lux Suprasson P Max Lux only Light out delay can be set between 0 and 9 seconds Lux version only Mains power supply 110 to 150 V AC 50 60 Hz 230 to 260 V AC 50 60 Hz Fuse protection dimensions 5x20 mm 0 5 A 230 V or 1 A 115 V Power consumption 55 VA Insulation 4kV 1 ms Factory configuration Power 5 in all ranges e Light out delay after 3 mins Suprasson P Max Lux only e Standby after 9 mins Manufactured in accordance with current legislation CEM conforms to the general IEC 601 1 EN 60601 1 standard Retention of the memorized configuration 10 years at 25 C 10 Mechanical Water pressure at inlet 1 to 5 bar 14 to 72 PSI Air pressure at inlet Suprasson P Max Lux 4 5 to 6 bar 65 to 87 PSI Operational Water flow rate at exit 0 to 120 ml min Frequency of vibrations 27 to 33 kHz Peristaltic pump adjustable from 5 to 40 ml min optional Syringe function rate of flow from about 120 l min with the peristaltic pump Dimensions and use Overall dimensions e Width 250mm e Height 110mm e Depth 300mm Weight 2 7kg Fixing mount on a table Operating temperature 10 to 40 C 30 to 75 RH Storage transport temperature 40 to 70 C 10 to 100 RH Symbols and markings Ff Alternating current ype BF device AN wane please refer to the accompanying docume
12. ngroup com 8F Hanil B D 132 4 1Ga Bongrae dong Joong gu SEOUL Tel 82 2 753 41 91 Fax 82 2 753 41 93 e mail info kr acteongroup com E 91 G I D C Electronic Estate Sector 26 GANDHINAGAR 382044 Tel 91 79 323 80 00 Fax 91 79 642 58 51 e mail info in acteongroup com 59700 N9 Version 2 E mail satelec acteongroup com acteongroup com
13. nstructions Fault No ultrasound Water leaking from the handpiece connector Leaking from the end of the tip pedal released No light with the Lux handpiece Overheating of the Lux handpiece Energy saving mode not working properly Possible Cause Tip not tightened correctly Defective handpiece Oxidization and or black marks on the pins of the connector Cord cut Worn handpiece o ring Dirt in the water circuit electric valve blocked open Blown bulb Incorrect use or setting of the mode Electrical problem No air in the supply Air inlet pipe not connected Incorrect use or setting of the mode Exiting from energy saving mode not possible Adjustment impossible Solution Re tighten the tip Replace the handpiece Clean the contacts or replace the cord or return to Satelec After Sales Service Replace the cord or return to Satelec After Sales Service Replace the o ring Clean the circuit and electric valve check the electric valve is working properly or return to Satelec After Sales Service Replace the bulb Refer to the instructions Return to Satelec After Sales Service Contact your approved installer Connect the air inlet Refer to the instructions Return to Satelec After Sales Service Return to Satelec After Sales Service Electrical Class 1 type BF device Intermittent duty 10 min 5 min Information display LCD digital display with colored backlighti
14. ntation Marking Enso FRANCE GERMANY SPAIN Z I du Phare B P 216 F 33708 MERIGNAC Cedex Tel 33 0 556 34 06 07 Fax 33 0 556 34 92 92 e mail satelec acteongroup com 130 Gaither Drive Suite 100 MOUNT LAUREL NJ 08034 Tel 1 856 222 9988 Fax 1 856 222 4726 e mail info us acteongroup com Industriestrasse 9 D 40822 METTMANN Tel 49 0 21 04 95 65 10 Fax 49 0 21 04 95 65 11 e mail info de acteongroup com Av Principal 11 H Poligono Indus Can Clapers E 08181 SENTMENAT BARCELONA Tel 34 93 715 33 66 Fax 34 93 715 32 29 e mail info es acteongroup com Unit 1B Steel Close Little End Road GB EATON SOCON PE19 8TT Tel 44 0 1 480 477 307 Fax 44 0 1 480 477 381 e mail info uk acteongroup com CU ACTEON group 17 av Gustave Eiffel e BP 216 33708 MERIGNAC cedex France Tel 33 0 556 34 06 07 Fax 33 0 556 34 92 92 MIDDLE EAST Numan Center 1st Floor N 111 Gardens Street CHINA PHILIPPINES KOREA INDIA PO Box 468 AMMAN 11953 JORDAN Tel 962 6 553 4401 Fax 962 6 553 7833 e mail info me acteongroup com Office 401 12 Xinyuanxili Zhong Street Chaoyang District BEIJING 100027 Tel 86 10 646 570 11 2 3 Fax 86 10 646 580 15 e mail info cn acteongroup com 3F King s Court Il Bldg Pasong Tamo Street Makati City 1200 MANILA Tel 632 811 29 14 18 Fax 632 811 24 88 e mail info ph acteo
15. ontic and periodontic treatment according to option in sterile or aseptic conditions Irrigation kit Available as an option Irrigation kit comprising a peristaltic pump an irrigation line and two reservoirs for irrigation liquids Independent adjustment of irrigation flow Syringe effect Easy manual selection of the active reservoir or complete shut off Support for using bottles or pouches of sterile solution Parts included A Suprasson P Max or Suprasson P Max Lux device depending on the option A mains cord single or multifunction pedal foot control depending on the option Suprasson or Suprasson Lux handpiece depending on the version Tip kit depending on the sales version General view Refer to figure 1 on the fold out part of the cover 1 2 3 Rear panel 4 Button to control pump flow Display area 2 Irrigation kit Control keyboard 6 Suprasson handpiece Front panel Display Includes display and indicators 7 Boost indicator soosr Lights when the BOOST function is activated 8 Standby indicator l Lights when the device is in standby mode energy saving 9 Display The display background color indicates e power on the color indicator appears bluish white Any other color signals a malfunction see chapter troubleshooting e in use the color displayed green yellow blue and orange corresponds to the color code of the ultrasound power range selected
16. panel goes out The device is in energy saving mode The gl rep 8 indicator lights up Reminder the device enters standby mode on its own after a predetermined time See Setting the device s standby delay Leaving standby mode 1 Press the key rep 20 The lj rep 8 indicator goes out and the device returns to the configuration being used before entering standby Changing the delays Delays refer to the time the light in the Suprasson Lux handpiece stays on after ultrasound has been used and the time taken before the device goes into standby mode after a period of inactivity Delay before the light goes out This function only applies to the Suprasson P Max Lux It specifies the length of time before the light goes out after ultrasound has been used three seconds by default To change this setting 1 Put the device into standby key 2 Press the boost and yellow keys together then the key while keeping the other keys depressed The display will indicate L Light followed by a figure giving the current time delay in seconds Release the keys 4 Set the time with the or keys The length of time can be set from 0 L to nine seconds L9 The new value comes into effect when the device is restarted Therefore a light out time delay of 7 seconds will be displayed at L7 Delay before the device enters standby mode This setting specifies the length of time before th
17. r dry key Switches irrigation on after keys 16 or 17 have been selected The indicator rep 12 lights up A second press turns irrigation off 19 The keys Reduce key or increase key ultrasound power in the selected range The values go from 1 to 10 20 Button to enter or leave standby mode amp This button is mainly used for leaving standby mode The initialization sequence is started Only this button can be used to leave standby mode This button can also be used to put the device into standby mode but the device goes into standby automatically after a set time see Setting the standby delay of the device Rear panel Is set out as follows 21 Team Up connector optional Connection to an electro analgesia device used during prophylactic treatment 22 Compressed air supply Suprasson P Max Lux A rapid disconnection system with an automatic valve enables it to be connected to the compressed air supply 23 Foot control connector Connection for the single or multifunction foot control pedal 24 Irrigation kit connector Refer to kit instructions for details 25 On off button 0 1 26 Air pressure adjustment Suprasson P Max Lux Adjustment is automatic via a pressure regulator integrated into the device 27 Drinking water supply connector Its rapid disconnection system with an automatic valve enables it to be connected to the supply A removable filter is located on
18. setting Handpiece and or tip blocked Unsuitable treatment or tip or selected ultrasound power too low Tip not tightened correctly Bent or worn tip Incorrect use of the handpiece and or the tip Faulty contact between the handpiece and its connector Water present in the handpiece connector Power not set correctly in relation to treatment Tip not tightened correctly Bent or worn tip Incorrect use of the handpiece and or tip Solution Check and or replace the mains cord Replace the fuses Contact your electrician Set the switch to the on position I Check and or replace the foot control Contact your approved installer Connect the water inlet Adjust the setting Disconnect the handpiece and check if water is coming out of the cord if not return the device to Satelec After Sales Service if it is unscrew the tip from the handpiece using the syringe blow air through the tip and the handpiece If the problem persists return to Satelec After Sales Service Change the treatment or tip or adjust the ultrasound Re tighten the tip Replace the tip Refer to the instructions Push the handpiece into the connector more firmly without turning it Dry the connector Where there are black marks between the pins of the connector and or the contacts of the handpiece return to Satelec After Sales Service Adjust the power see instructions Re tighten the tip Replace the tip Refer to the i
Download Pdf Manuals
Related Search