Untitled - Neo Car Audio
Contents
1. Note that in the X3 there may be two 6 pin audio connectors present Connect the harness to the one without the CD label 5 m Route the interface cable to the front of the vehicle Fold down rear seats if applicable and route the extension cable through the rear seat bottom cushion Route the remainder of the interface cable ie under the door sill or under the driver s seat to a location where the module can be easily accessed in the future Make sure you have set the DIP switches on the MediaLink as specified on pages 2 3 Connect the BMW interface cable iPod Dock Cable and SIRIUS Connections if applicable to the MediaLink module and double check all connections See page 4 for the connection diagram Test the installation Replace any trim carpeting or panels that were removed during installation iPod content browsing By default the interface creates a Playlist having a name that is the same as the name of the iPod This Playlist is the very first on the list of Playlists shown while browsing in Playlist mode This Playlist contains all the songs on the iPod Once a Playlist is selected an Artist may be selected within that Playlist using the Artist Mode Albums by the selected Artist within the selected Playlist may be selected in Album Mode ALL ARTIST and ALL ALBUM designate all available content in those categories aj Las prowsabl genie Song Charging The interface automatically charges the ba2. F Expand Your Factory Radio add m amp iPod And Bluetooth To Your Factory Radio Owner s Manual Neo MediaLink PBMWGV1 BT ENJOY THE MUSIC Warning and safety Please read these instructions carefully before proceeding Failure to follow instructions may result in improper operation or injury Neither Neo Car Audio nor Apple Inc its regional offices distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit Do not open disassemble or alter the interface in any way Do not insert anything into the casing Do not cut or try to alter cables in any way and always use the correct connections Only operate unit when stationary or ask passengers to operate it for you Do not allow the Apple iPod iPhone to distract you from driving Exercise good judgment and keep your eyes on the road at all times Do not expose unit to extreme temperatures humidity or shock Keep the unit and iPod iPhone away from fluids Keep away from children Interface components may contain small parts can be broken or disassembled and components may become loose from vibration and heat Small components and packaging materials may be a choking hazard when handled by children Congratulations on your purchase Thank you for purchasing this integration kit Please review this booklet before operating the unit This interface was designed and manufactured to seamlessly int
3. Within each mode use the TRACK button to browse the items available Note if the iPod is unlocked radio control will be limited to Songs Playlists and Albums Text display will also be limited to show only Controlling the MediaLink USB memory source Select DISC 1 then use the track buttons to change from song to song Select DISC 2 6 to browse Folders and use the track buttons to navigate through the folders on your USB flash drive The Medialink unit will recognize the first 8 levels of folders with up to 200 accessible folders within each folder Only the first 1000 files will be read in each folder the rest will be ignored Songs play in the order they were added to the flash drive Use the Random feature on radio to shuffle all songs on the flash drive This may take a long time to complete if the flash drive is more than 4GB wi Y Y Y Controlling the MediaLink SIRIUS source The MediaLink integration kit features SIRIUS connectivity requires additional tuner Use the TRACK buttons or jog DIAL to browse between subscribed channels To store a subscribed channel to memory e Single line radio Tune to desired station Press RANDOM button and select which DISC button preset 1 6 to save to Press RANDOM button once more to store the station e Navigation radios Tune to desired station Press and hold the desired DISC button preset 1 6 to save as preset e Mini Navigation radio Tune to desired s
4. t the gain setting may be required Reset the iPod Verify proper connection to iPod interface Check for compatibility Older iPad models don t support USB audio and may only operate in Locked mode Sirius tuner can t be selected Why does the radio display show EMPTY STOP and no music plays Cannot select the interface Radio steering wheel controls do not operate iPod Ensure the cable connecting the SIRIUS tuner is securely connected to the correct receptacle on tha module Refer to page 19 for cycling through awdio Sources The iPod has reached the end of a selection Go ahead and browse for Verify that the correct button is being pressed to access the interface CD or Mode Disconnect the module s power connection for one minule to reset it Reset iPod and make sure the most recent iPod firmware is installed Check vehicle user manual on how steering wheel controls work long presses may toggle alternate function Engine may need to be running on some models Playback of content selected on the iPod before il is connected to the interface continues until naw content is selected UNLOCKED display on screen Why is the interface not controlling the What size of USB flash drive should use Text is not scrolling When the Medialink is playing iPod music in UNLOCKED mode browsing mode information isn t available so the iPod UNLOCKED notification is shown To view information associated with browsi
5. A al eh 11 Wao car orienta men Data connection requirements 3G AG WiFi Users must have an active wireless data connection in order to stream music from an app while in the car Data connections including 3G or 4G through wireless carriers or a third party wireless Internet access point connected to your mobile device through WiFi will work Because this app requires a data connection it will only work on connected devices such as the iPhone and iPod touch Controlling Internet Radio Apps NOTE The following features may not be supported by all apps For demonstration purposes the following examples will show the features for the Livio Car Internet Radio app The app must be active on the screen of the device To do so simply tap the app s icon and it will load 11 Next previous TRACK buttons execute application specific features such as skipping stream or cycling between station presets DISC 1 6 buttons are associated with station presets when used with the Livio Car Internet Radio application iPhone operating system 1055 enabled application developers to share the now playing screen information For example when using the Pandora App you will see artist album and song information on the radio s screen When using an application that doesn t implement this feature or running 10S4 only the name of the application will be shown Please note that although iOS 4 4 2 1 is supported on iPhone 3G a
6. aLink via Bluetooth 1 Enter Bluetooth mode on MediaLink 2 Make sure your cell phone is paired with MediaLink 3 Select and play a song from your cell phone s music player Note Some cell phones require you to manually select the option to play music via A2DP Bluetooth Streaming Song information is shown on the radio display if your phone supports AVRCPI 3 4 Use Track UP DOWN to skip tracks FF RW songs on the AVRCP compatible phone 10 Accessing the auxiliary input An auxiliary audio device can be connected to the MediaLink unit through it s 1 8 headphone jack In AUX mode music is controlled only through the auxiliary audio device Audio equilizer setting can be adjusted while in auxiliary mode by DISC 1 4 and using tha TRACK button to increase or decrease levels DISC numbers and corresponding setting are shown on the right chart Aut fae 1 8 mini stereo jac nol included Internet Radio Application support iPhone iPod touch This kit includes support for internet radio streaming apps available on the 1Tunes Store Thousands of stations can be streamed through data connections Supported apps include Livio Car Internet Radio Pandora iHeart Radio and more Supported features such as text display on screen and next previous track functions will vary by app To learn more about each app specifically please visit the website for the app you need information about QGuLATAT To p 5 85 MN
7. be disconnected during installation to ensure proper initialization of the module when it is connected This step is REQUIRED for proper operation of the module Access the CD changer cable The location of this cable varies by BMW model for connector locations see page 4 If the vehicle you are performing the installation on has DSP refer to page 4 and then proceed to step 5 Locate both the 3 pin amp 6 pin connectors If the vehicle has a factory CD changer installed the 3 pin amp 6 pin cables will be connected to it and will need to be disconnected If there is not a CD changer installed the cables will be bundled and may be tucked away behind carpeting Some vehicles will have the CD changer wiring in a protective sheath which may make it more difficult to locate Non US models may not be pre wired for a CD changer and require an additional harness from BMW to be connected Connect both 3 pin and 6 pin cables to the BMW Interface Harness ATTENTION There are two 3 pin connectors presented in the vehicle During installation make sure that the 3 pin connector from the vehicle DOES NOT have a brown wire in the middie The 3 pin connector of the phone pre wiring looks identical to the 3 pin connector of the CD changer pre wirlng Locate and use the correct 3 pin cable with the brown wire on the outside Incorrect connection will result in permanent damage to the unit and will not be covered by warranty J4pin and pin BMW cables
8. e e DISC 6 controls MAT setting Available options are Default Extended Phone only and Off refer to the chart below Options Function Default MAT back to factory default configuration Extended Tum on ALL MAT feature Phone only Tum on the phone relative MAT anly CHT Tum off MAT completely Pairing MediaLink with your cell phone via Bluetooth 1 Turn on the Bluetooth feature on your cell phone 2 Select MediaBridge as your audio source from your radio then select Bluetooth mode 3 Search device from your cell phone 4 Select MediaBridge from device list and enter password 0000 to connect Note MediaLink is only discoverable for Bluetooth pairing for the first 60 seconds after selecting Bluetooth mode within the MediaLink This is indicated with a DISCOVRABL message on the radio display Please perform pairing while the vehicle is parked Bluetooth devices remain paired 30 seconds after exiting MediaLink mode within this time active audio streams and phone calls aren t audible on the phone but can be resumed by re entering MediaLink mode Answering Making a phone call e To answer an incoming call press the button that tunes to the next track or channel e To reject an incoming call or terminate an active call press the button that tunes to the previous track or channel e To make an outgoing call dial on the phone like you would normally IN the radio while Medialink is the Playing music from a cell phone through Medi
9. eam must be playing before information on the display is updated 12 Terminate kill the App If you need to terminate kill the app please follow the steps below l Double tap on the home button of the iPhone to bring up the list of running apps If you don t see the app s icon right away swipe the screen left or right to locate it Note If you do not see such task bar but rather a music control popup then you have an 1OS device that does not support background run of apps therefore this section is not applicable to you Press and hold the icon of the app until a red minus icon shows Tap the red minus icon shown on top of the app This will close the app In a few seconds the iPod music playback app should reinitialize itself and become active again This can be verified by going back to the list of running apps and swiping the screen unit the music control section is shown The iPod app icon next to the music control sections shows that iPod is your audio source ote 9 Internet Radio App Settings Many radio stations offer lower bitrates Selecting streams with a lower bitrate will reduce data usage and may reduce stream interruptions during the drive For example with the Livio Car Internet Radio app to adjust bitrates manually users can Go to the Setting menu of the device select the Livio Radio settings the change the Maximum Bitrate Filter and set it to 64K Other settings such as Buffer time and Reliability filter may als
10. egrate with your vehicle s factory audio system MediaLink Module User manual NEO CAR AUDIO USB extension Optional accessories sold separately Cradle BMW SAT cable DIP switches overview MediaLink Module ON OFF Switch Positions DIP switch settings for BMW Mini The following DIP switch settings are used to configure the MediaLink module to interface with the various vehicle radios Before installation set the DIP switches to the position shown for the corresponding radios Car configuration switches BMW amp MINI a CD Radio 16 9 JF Radio Radio specific text field configuration should be performed during installation Please refer to interface setting DISC 5 section on page 2 Supported iPod models and firmware version requirements TIT mec GB classic Ps a 39 C Promes 155 Attention Installer Please read the following Neo Car Audio strongly recommends that the unit be installed in an easily accessible place DO NOT PLACE IT BEHIND THE RADIO AND DO NOT HIDE UNDER CARPET Whether the unit is professionally or self installed put the module where you the end user can get to it easily in the future Have the installer show you where the interface module is installed Installing the module behind the radio will make it difficult to Add possible future upgrades changing software adding new features improving operation Access the AUX input o
11. fects in material and workmanship of products sold by Neo Car Audio or its authorized agents distributors and dealers The warranty period begins the day a product 1s purchased by the end user Products found to be defective during the warranty period will either be repaired or replaced by Neo Car Audio at no charge unless warranty is void Unauthorized attempt of repair or alteration of the product in any way immediately voids this warranty Warranty does not extend to cosmetics or finish A Neo product specialist must determine that a defect 1s present in the product and issue an RMA Be sure that all wiring is connected as described in the user manual and all related equipment is functioning properly Neo Car Audio disclaims any liability for other incurred damages resulting from product defects Any expenses in the removal and reinstallation of products are not covered by this warranty NEO CAR AUDIO BMW Mini Cooper compatible integration for iPod iPhone Internet Apps Bluetooth SIRIUS and AUX WWW neocaraudio com 15
12. n the module to attach any audio device e Access the DIP switches located on the module Remove the unit in case of failure MAKE SURE THAT THE MODULE IS IN AN ACCESSIBLE PLACE Connection diagram Sirius 3C D1 factory cable Connection diagram for DSP option Dia mot connect an iPod dock cable under any circumstance to the SIRIUS moduls i connection can cause permanent damage to iPod SIRIUS module BMW vehicles with Digital Signal Processing DSP amplifiers must use a DSP Kit Contact Neo Car Audio to order To confirm if the vehicle has DSP check for a bare metal coax cable and a 3 pin connector for connector locations see below This DSP was only an option on some BMW 5 Series 7 Series X5 ZA and X3 vehicles BMW Interface Harness 12ft RCOCA I amp PIN DSF Harness Factory pre wired CD changer cable locations 2 DEP Amp E Installation Note Installation should only be performed by a qualified professional Beware of sharp edges to avoid injury and exercise caution when removing trim pieces as they may break The module should be placed in an accessible location such as the glove box consoles under the front seats or in some cases in the trunk to allow iPod SIRIUS AUX cables to be connected The module firmware may need to be updated periodically and must be removed from the vehicle and connected to a computer to apply the update l Disconnect both battery terminals These cables must
13. nd iTouch 2 generation applications do not run in the background As such loading the app takes longer than on devices where the app is present in the background ami ATET 15 AT 130 Livio Radic 10X FM Dance 126kbs MP The Project ug f TFM TOI HAE LOT DT 3 If your listening experience is interrupted by a call under most conditions the app will resume playback at the end of the call Music playback apps running on your iPhone are sent to background automatically when the home button of the phone is pressed but the music playback itself is not stopped To resume playback of your iPod music library stop Livio playback by tapping on the screen below the Livio Radio logo An icon representing stop will show on the main Livio screen Press the home button to send the application to the background Other apps may need to be terminated manually A few seconds after this the iPod music playback application will reinitialize itself and become active again if the iPod was locked when it was connected to the kit This is indicated by an Accessory Connected message being shown when the iPod icon is tapped If the iPod was in unlocked state when it was connected to the kit press the play button on the iPod application Text Display from the Internet Radio App Text that scrolls across the radio s screen is associated with the stream shown on the radio and displays current song or station information Str
14. ng modes ensure the hold button of the iPod is set before connecting it to the MediaLink Please make sure that the USB connection is not loose Make sure that an iPod case is not preventing the dock connector from being fully seated Disconnect and reconnect the device If iPod is not responding please try resetting iL USB device must also be FAT 18 32 format and contain supported MPS WMA or AAC content Large capacities are supported however up to 4GB is recommended for optimal user experience Scrolling is not supported in multiline display mode however you can configure far single line operation to see scrolling text 14 Disclaimer Important disclaimer please read Unauthorized reproduction or reverse engineering is strictly prohibited Intellectual property included is distributed under specific license agreement with respective owners and is licensed only not sold No warranty explicit or implied is stated Neither Neo Car Audio nor any of its agents distributors dealers or vendors shall be liable for damages IN NO EVENT SHALL NEO CAR AUDIO LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION Support and Warranty If you experience any problems or need help please contact Neo Car Audio at 619 704 0703 Products carry a 1 year limited warranty that protects you from de
15. o help in getting a more stable connection Updating Firmware Mac OS illustrated Please contact Neo Car Audio Tech Department for firmware updates rd ia Bet deum iUm Connect module via mani USB Device specifications and update selection Licenses Agreement click Agree to proceed Fredam maar ba reinard beatae ir can ba apodeme Your mmole is naw up ra dare igi Pasa ee ve rp zat Verifying Devices Program Memory Dri ups jo version Y rh ES mu EE uma LT Lini Product registration notification Finmware update progress Module updated successfully 13 Troubleshooting os roniem ion Radio NAV display only shows DISC and track number and there is no iPod control Ho text display on radio Correct DIP switch settings but still no text display iPod does MOT charge Music is distorted or sound level is too No audio from iPod source Make sure DIP switch settings are correctly set for text display sure DIP sattings are correctly set for text display Please also select proper display mode Make sure the module is reconnected with the vehicle off when changing any dip switches Verify that the vehicle s radio is capable of displaying CD text Some early model year radios don t support text display Check all connections See if iPod charges while connected to computer or wall charger You may need to reset the iPod Make sure all EQ and BASS boost options are turned off on your iPod Adjustments
16. tation Press jog DIAL press desired DISC button 1 6 press DIAL to save To recall a memorized channel Simply press the desired DISC preset 1 6 Hon ariga cadira Ce IE i boe carni eis e PRESET Hi s When cona prm FP is io casabact Navigation radices s 14 io recall PRESET 1 6 sizGona Te siora stations t butbesn 1 6 i mice Cue Goon DEI SET 1 5 14 ete Fa SIFJUS CONNECT compatible unser i amp noc detected than a Ma Tuner massage im daplayet Go to Chanel DOO to view te SIPFJUS Tuner IO for acivalion Tha 12 digit SID display formal cs shewn n two parta as SID 123456 l olkowad by T8SABC Bluetooth amp MAT Music Announcer Technology configuration To alter voice announcement and Bluetooth pairing settings select Bluetooth as your audio source press the DISC button that corresponds to the feature you want to configure and then use Track to browse through configuration options e DISC 1 2 or 3 should be selected if you want to control Bluetooth audio streaming playback e DISC 4 controls the Auto connect feature Available options are Enable and Disable This controls whether or not the MediaLink will reconnect automatically when phone becomes disconnected Only the most recently paired device will be reconnected automatically e DISC 5 controls the paired devices memory There is only one option Change tracks to clear the listing of paired devices with the MediaLink and put module into discoverable mod
17. ttery of the iPod when Charging may be shown by an connected and your vehicle ignition key is in the ACC ON position icon that appears on the upper right comer of the iPad screen May vary by model iPod locked unlocked Settings and Features IPod hold OFF Before connecting the iPod MediaLink module turn the hold switch MediaLink module turn the hold switch ON to fully control and browse the songs OFF to fully control and browse the songs from the radio The iPod is locked in this from iPod Browsing capabilities are Before connecting the iPod to the Note Setting the iPod s hold switch must be done prior to connecting it to the dock cable iPod nano 6th generation will always be in locked mode since it does not have a lock switch dide to E Far iPod touch and iPhone when the screen is not active as shown on the left the ai iPodiPhone is locked Press the power button to lock the iPhoneAPod Touch Basic Operation Accessing MediaLink as the audio source Much like the radio s AM FM tuner satellite radio or CD audio sources the MediaLink is integrated to be part of the vehicle s audio system To access the MediaLink source press the MODE or CD button on the radio Pressing this button repeatedly will cycle through sources present in the vehicle MediaLink source selection The MediaLink adds additional audio sources including iPod SIRIUS Satellite Radio and auxiliary audio input To cycle between these so
18. urces use the next previous TRACK buttons within the first 5 seconds of accessing the MediaLink as the audio source while in DISC 1 This source requires additional parts accessories service from Neo and or third parties MediaLink Interface settings within first 5 seconds of accessing the MediaLink as the audio source Select DISC 1 Select DISC 3 Select DISC 4 Select DISC 5 Select DISC 6 to apply settings and resume audio playback to change default volume level use track up down to adjust between Min and Max to enable disable scrolling text to choose between single line display and multiline display modes multiline display mode only available on 16 9 Navigation radio to view MediaLink serial number and firmware version DISC 2 has no settings available Operating the MediaLink from select BMW and Mini radios NOTE S84 1 Series and 223 will require double clicking buttons when illustration showing BMV Business CD Radio Press the MODE button best is cigniayed NOn some cite BMW rain o m perm action use the jog dial again ip naigabe through Press DIAL to store SIRIUS sta Uniockad Pod Unki ton presets ope ls sns 93 48 19 North THB 10 25 West Altiade 260 fr Controlling the MediaLink iPod Source Icon legends Use DISC 1 6 to enter browsing modes SONG PLAYLIST ARTIST ALBUM PODCAST and AUDIO BOOK
Download Pdf Manuals
Related Search