GPS Vehicle Tracker USER MANUAL (Model: MT08)
Contents
1. 8 9 Troubleshooting 9 Appendix 1 Configure by computet 10 Appendix 2 SMS Command list 14 User Manual of MT08 Product Overview The MT08 GPS motorcycle vehicle tracker is a high cost effective solution for security amp real time tracking It is specially used for motorcycle car tracking because of its compact size and waterproof design Applications Vehicle real time tracking Motorcycle Car security Anti hiyack Fleet Management Product functions and specifications 3 1 Product function Track on command or by time interval via SMS GPRS Track by distance Check the location directly by the Google map s URL Check the car s real physical address such as city name street name etc need support of the GPRSOI or SMSO1 Center Track by mobile SMS to get the latitude longitude speed direction and odometer etc Arm Disarm by SMS or phone call Engine ON OFF Fuel monitoring Alternative Online website tracking by GPRS data network Over speed alarm Geo fence alarm Movement alarm SOS Panic Button Doors detection Alternative Built in 350mAh rechargeable backup battery when the car battery is cu2. 1 The GPRS data service of the tracker s SIM card must be activated and the correct GPRS setting is needed refer to the chapter of the setting of GPRS connection user can set up the GPRS upload time interval to 0 so as to save the GPRS flow 2 The physical address depends on the Google map s address information If the place has very detailed information on Google map then the physical address by SMS is very detailed 6 7 Check the GPS coordinates by SMS SMS command 000000CHK This instruction is used to inquiry the vehicle s location amp system s status The system will send back theSMS includes the similar information such as System is Armed 6 8 Stop the car by SMS SMS command 000000STP This instruction 1s used to cut off the power supply or fuel supply so as to stop the motorcycle car immediately Attention It is very dangerous to stop the car when the vehicle is running at high speed We do not take any responsibility to the consequence caused by this action 6 9 Restore the stopped car to normal status SMS command 000000RES This instruction is used to restore the car to normal status after stopping the car 7 Presenting by SMS for GPRS tracking 7 1 Set ID by SMS Note for the device model MT08 ID is fixed as its IMEI number 7 2 Set APN by SMS Description APN name APN user name APN password If no user name and password required just insert APN name only SMS command W lt password
3. W GPRS ip 36 46 375 Port 9500 interval 3600 see GPRS Tick to enable GPRS function select TCP or UDP mode Tracker ID ID Should be unique in number maximum 14 bytes APN APN Account APN Passoword Put your local APN APN username and password if necessary IP Port Put online tracking server IP and port our default is IP www global track net port 9500 To set the time interval to upload a data 12 User Manual of MT08 Note the ID for tracker MT08 can only set as its IMEI number SMS Tracking SMS Tracking No Interval 0 min Apply panned lee Apply Prefx area code T o App TimeZone 0 min Appi wiretapping OoOo o o Apply Power Saving 0 min App Couse 35 Apy Distance 300 om Apply SMS at certain time interval in minutes Over Speed To set country code i CSCSC idS Prefix area code To set country code Time Zone To set time zone GMT 60 minutes if in west half western hemisphere is necessary to put ahead Wiretapping To set wiretapping mobilephone number Distance To set track and upload data by certain distance in meters Power Saving To set time enter into standby mode when shaking not detected to save power and gprs data traffic To set upload data via angle shifting by certain angles Authonzed Phone No PIN SMS Call sos ButtonIN1 SMS Call Button B IN2 Read ss i wawap Button C IN3 Write SMS Call S
4. is acceptable required for those behind GMT For example 120 Set character for SOS alert W 033 PChar Char P is the button number P 1 2 or message 3 Char is the character in SOS message and max 32 characters Set tracking by driving angle W 036 Degree Measured by Degree s change function Degree 0 disable this function X 1 359 means set angle degree interval in this function Set tracking by distance function Measured by Meter s X 0 disable this functio X 1 65535 means the distance interval in this function Set clear reset odometer function To clear and reset odometer information to zero Set function of receiving location W 111 This function need support of the physical address name via SMS GPRSO1 or SMSO1 tracking platform address SMS will be received in text format Get version and serial To get version and serial number of number current firmware Reboot GPS and GSM Module W QOOHHH HHH is the ending character Initialization W 990 099HHH HHH is the ending character To turn all the parameters settings except for the password to factory default Password Initialization W888888 999 666 This command will reset the current password to factory default password 000000 sipB User Manual of MT08 Get current location wesss 000 Get current location of MTO8 Get location in Google W 100 map URL format via SMS Change u
5. by SMS 5 6 3 Check the location by Google Map s URL 5 6 4 Authorize the Alarm received Mobile 6 6 5 Change user password 6 6 6 Check the real physical address 6 6 7 Check the GPS coordinates by SMS 6 6 8 Stop the car by SMS 6 9 Restore the stopped car to normal status 7 Set SMS for GPRS tracking 7 7 1 Set ID by SMS 7 7 2 Configure by computer 7 7 3 Set IP Address and Port by SMS 7 7 4 Enable GPRS Function 7 7 5 Set Time Interval for sending GPRS Packet 7 8 Installation
6. the location by Google map s URL SMS command 000000MAP Upon receiving the SMS command the tracker will automatically send back the SMS including the Google map s URL user an use smart phone GPRS data service is enabled to open the URL the car s location will be showed on the Google map 6 4 Authorize the alarm received mobile SMS command W 003 F P lt Mobile number gt ees the user password default one is 000000 F 0 to turn off this function F 1 to send alert SMS P 1 the first phone P 2 the second phone P 3 the third phone In case of alert the alarm SMS will be sent to this preset mobile number automatically Example W000000 003 1 1 13800138000 to the tracker s SIM card number if there is any alert system will send alert SMS to the first mobile 13800138000 6 5 Change user password SMS command W lt 000000 gt 001 HHHH lt 000000 gt is old password is new password default one is 000000 The length of the user s password is 6 digits Users are suggested to change to the new password in use Example W000000 001 123456 6 6 Check the real physical address SMS command 000000ADD When user sends this SMS command to the tracker the tracker will automatically send back the car s real physical address such as city name street name to your mobile by SMS There is no need for the user to setup any server but it needs supports from our GPRSO1 server User Manual of MT08 Remark
7. OS Button IN1 To set Mobilephone No for SMS or Calling when SOS button Input 1 is triggered SMS Call Button B IN2 To set Mobilephone No for SMS or Calling when Button B Input 2 is triggered SMS Call Button C IN3 To set Mobilephone No for SMS or Calling when Button C Input 3 is triggered SMS Initials SOS Button IN1 SOS Alarmi Apply Button B IN2 Cry For Help Apply Button C INS Call The Police Apply SOS Button IN1 To customize the reply SMS text when SOS Button Input 1 triggered Button B IN2 To customize the reply SMS text when Button B Input 2 triggered Button C IN3 To customize the reply SMS text when Button C Input 3 triggered Extended Settings M Call For SMS Cut Off Power Appi Call for SMS Tick it to reply SMS when calling in Cut off Power Tick it to send alert when the external power be cut off 13 User Manual of MT08 Appendix II SMS command list Presetting by SMS for GPRS tracking Set ID for MTO8 by SMS W 010 ID Tracker ID must be less than 14 digits W 011 APN APN Set APN by SMS Name APN Password Set IP Address and Port by W 012 IP Port SMS Enable GPRS Function W 013 X Set Time Interval for Sending GPRS Packet W 014 XXXXX Output Control W 020 P F Output Control Safe W 120 ABCDE mode This function is achievable when the speed is below 10km h and GPS is available Set power sa
8. Parameters of MTO8 Step 1 Buy one specific USB cable for configuration from our company USB cable Step 2 Install USB driver program for the configuration USB cable 1 Run CP210x_Prolific_driverInstaller to install the driver for the USB data cable Note CP210x_ Prolific driverinstaller is in the folder USB 232 Driver in the CD Connect the USB Data Cable between MT08 and PC 10 User Manual of MT08 2 Connect the configuration cable with PC open device management of your computer you can find Prolific USB to Serial comm Port as following picture shows S esr Sa 3 J XA FA SEV BEBH H e m H mlU 4 gy len THINK 8 DVD CD ROM ian gt ca IDE ATA ATAPI 33388 p JE SM Driver gt cy MARNE OM 0 LPT gt BIRERE gt BARTAS gt isms gt ql KRE gt E Sees The USB port is virtual comm Port com3 in this example Step 3 Open the GPS Tracker parameter Editor 1 Connect MT08 with PC by the configuration cable 2 Connect MT08 is in the power off status 3 Double click GPS tracker Parameter editor exe and select the COM port following picture shows GPS Tracker Parameter Editor 2010 CI Emea P Write GPAs TCP Trackerio 2012010506 APN CMNET APN Account APN Password IF 36 45 9 75 Fort 9500 Interval 3600 ES afm Apoi SMS Tracking SMS Tracking Mo Interval 0 Password 000000 Apply Over Speed 0 kmh Apply Prefulaeacode apply TimeZon
9. User Manual of MT08 GPS Vehicle Tracker USER MANUAL Model MT08 Please read carefully before operation User Manual of MT08 Contents 1 Product Overview 3 2 Applications 3 3 Product Functions and Specifications 3 3 1 Product Functions 3 3 2 Specifications 3 MT08 and Accessories First Use 4 5 1 Install SIM card 4 5 2 Charging 4 5 3 LED Indications 4 6 How to use it 5 6 1 Arm Disarm by phone calling 5 6 2 Arm Disarm the system
10. cted to the GSM network 6 How to operate it The default user password is 000000 If the user password is changed user should send the SMS command with the new user password instead of 000000 X X X is the control code all the letters must be capital letters or in small letters command with mixed capital letter amp small letter is not recognized by system 6 1 Arm Disarm by phone calling User could also use the alarm received mobile phone to call the tracker s SIM card number so as to Arm Disarm the system Arm After hearing several ring tones if the system hangs up the call automatically and call back you it means that the system is armed Disarm After hearing several ting tones if the system hangs up the call automatically and don t call back you it means that the system is disarmed Note 1 There is no communication fee for this operation it is a very convenient way to arm amp disarm the system 2 The SIM card inside the device must have the function of caller ID display 3 Only the Alarm received mobile phone can realize this function User Manual of MT08 6 2 Arm Disarm the system by SMS SMS command 000000ARM This SMS instruction is used to arm the system When the system is armed the movement alert is activated automatically When the motorcycle car moves the alarm will be triggered SMS command 000000DSM This command is used to disarm the system amp stop sending alert SMS 6 3 Check
11. e O mn Wiretapping Apply Distance B00 m Power Saving 0 mn Apply Come f Authonzed Phone No 11 s o aS a SOS Buon sMs OZ OoOO L SE ClO BAN a a E ene eee eee 505 Button AINI SOS Alam Button E IN2 cy For Helpl Button C IN3 Call The Police Extended Settings W CalFor SMS Cut OF Power Tracker Disconnect User Manual of MT08 Click Start button to open the COM port 5 Turn on MT08 and it will connect with the Editor automatic as soon as they connect successful all the buttons are availability and the status bar will clue on Tracker Connect then you can Read or Write the MT08 s parameters E E iB GPS Tracker Parameter Eihar 2010 3 coma i izaj sari Tracker Connect GPRS GPRS TCP Tracker ID 2012010506 APN ICMNET APN Account APH Passveord IP 96 46 9 75 Port 9500 Interval 2600 sec Apply SM5 Trackin SMS Tracking Mo Interval 0 miri App Password 000000 Apply OverSpeed 0 kmh APPY Prefe area code o Time Zone oO mir Apply Wiretapping Sa Distance foo m Apply Power Saving jo min Course Ea Authorized Phone No SMS Call isos Button AN SMS Call Button B IN2 SMS Call Button C IN3 SMS Initials 505 Button 7 IN1 sas Alami Button B IN2 Cry For Help Button C IN3 Cal The Police Extended Settings fv Call For SMS Cut Off Power Tracker Connect Instruction of parameter settings GPRS ene
12. gt 011 lt APN gt lt APN user name gt lt APN password gt 7 3 Set IP address and port by SMS Description IP address is 210 209 68 180 Port is 9500 SMS command W lt password gt 012 lt IP gt lt port gt Example SMS send W000000 012 210 209 68 180 9500 We support domain name instead of IP address Example W000000 012 www global track net 9500 User Manual of MT08 7 4 Enable GPRS function SMS command W lt password gt 013 X Description X 0 means close GPRS default X 1 means enable TCP X 2 means enable UDP 7 5 Set time interval for sending GPRS packet SMS command W lt password gt 014 XXXXX Description XXX XX should be in 5 digitals and in unit of 10 seconds XXXXX 00000 to disable this function XXXXX 00001 65535 time interval for sending GPRS packet and in unit of 10 seconds 8 Installation Special port for setting GPS Signal LED GSM Signal LED SIM Card Slot Switch interal battery switch please turn to ON position MIC Port ae Power Red DC In power source Input voltage 9V 24V 12V suggested OUTI Yellow Output 1 It can be used to connect with relay em a IN4 Blue AD Port Engine on off detection Fuel IN1 SOS SOS panic button or door open detection User Manual of MT08 Recommended install place 9 Troubleshooting ring I call the tracker it does not I call the tracker it rings but it doesn t response with SMS I can not get the alarm me
13. rt Set Geo fence alarm 017 command is for alarm when tracker moves out the preset scope 117 command is for alarm when tracker moves in When the tracker moves in or out it will send an SMS alarm to the authorized number for SOS phone User Manual of MT08 W 017 data W 117 data The functions of BCDEFGHJ are remained for furthur use HHH is the ending character data is the coordinates which include Lower left X Lower left Y Upper right X Upper right Y For example 11404 0000 E 2232 0010 N 11505 1234 E 2333 5678 N Note 1 Lower left X Y longitude and latitude should be smaller than Upper right X Y 2 All longitudes and latitudes should be in ASCII format as follows Longitude DDDMM MMMM E W 4 places of decimal 0 is needed to be stuffed if no value available Latitude DDMM MMMM N S 4 places of decimal 0 is needed to be stuffed if no value available 3 Send W 017 or W 117 without data to disable this function 247
14. ser s password W 001 H HHH Set interval for automatic timed reports Set preset phone W 003 F P T number for SOS button Set over speed alarm When MTO8 speeds higher than the preset value it will send one over speed alarm SMS to the SOS preset number W 006 XX Set Geo fence alarm foursquare When the MTO8 moves out of preset scope it will send one Geo fence SMS to the SOS preset number W 008 ABCDEF GHIJ Extend Settings http maps google com map s f q amp hl en amp q 22 542563 114 077971 amp ie UTF8 amp z 16 amp iwloc addr amp om 1 KEKE is Old password HHHHHH is new password XXX is the interval in minute If XXX 000 it will stop tracking F 0 to disable this function F 1 only sending SMS F 2 only calling preset phone number F 3 both SMS and calling default P is the button number and should be 1 or 2 or 3 If SOS button is linked to IN1 then P 1 T Preset phone number T must be less than 16 digits XX the speed preset value 00 disable 01 lt XX lt 20 unit 10Km XX set distance from current central point place 00 disable 01 30m 02 50m 03 100m 04 200m 05 300m 06 500m 07 1000m 08 2000m A 0 disable position report function when a Call is made to MT08 A 1 enable position report function to get position SMS by Calling MT08 l 0 disable power failure alert l 1 enable power failure ale
15. ssage I can not get the correct GPS coordinates or the location is wrong 1 The GSM SIM card has no credit 2 The SIM card is protected by PIN code 3 Check the power supply if 2 LEDs flash 4 Check if the SIM card 1s placed correctly in the slot 1 The user password is wrong please use the correct password or reset the password to test 2 Low power please use external power supply to power on the unit to test 1 The SIM card inside the device has no credit 2 The Alert received mobile number is not programmed correctly or the SMS command is notin correct format 3 The mailbox of the user s mobile is full 1 Please make sure there is no metal obstacles above the tracker Please place the side with GPS antenna upside to the sky 2 Please check it at broad place 3 Please check if the GPS LED flash once every 3 seconds place the tracker to other place so as to make sure that it can User Manual of MT08 receive the GPS signal well 4 In cloudy condition it is a little hard to get the GPS signal and the GPS coordinate might have some errors Tracker fails to connect to server by 1 The SIM card must be activated with function 2 Do the correct setting for GPRS connection Appendix Configure by computer This part shows the basics of how to use the TOPSHINE Parameter Editor Note Don t connect MT08 to external battery when configuring How to edit this
16. t off the system will send out power failure alert immediately I O 2 Input and 1 Output Compact size with Waterproof design Voice monitoring Optional 3 2 Specifications misy aesa GSM Frequency GSM 900 1800 1900MHz or GSM User Manual of MT08 4 MTO8 and Accessories cC MTO8 Main Unit 5P I O Wire Harness Optional Accessories os Relay Fuel Sensor Microphone 5 First Use 5 1 Install SIM card Check that the SIM Card has run out of credit test the SIM in a phone to make sure it can send and receive SMS Before installing the SIM card turn off the power for MT08 Then install the SIM card as following 5 2 Charging Connect the device with external power like car battery and turn on its power switch then put the SIM card it will do charging automatic in place andlock Putin an available SIM the slot card like this User Manual of MT08 K Eni es HAE gi 5 3 LED Indications E Push the power switch to turn on off MT08 sBs ate Mi gt Tea CHK gR ploep Tt pe E fee ees EY js e w GPS Singal LED GSM Singal LED Switch Flashing every 0 1 second Initializing or back up battery power is low Flashing 0 1 second on and 2 9 seconds off MT08 has a GPS fix Flashing 1sencond on and 2 seconds off MT08 has no GPS fix Flashing 0 1 second on and 2 9 seconds off MT08 is connected to the GSM network Flashing 1sencond on and 2 seconds off MTO08 is not conne
17. ving mode when MT08 is still In power saving mode GPS stops working GSM enters standby mode and stop sending out message until it is activated by an SMS or an incoming call 14 APN Name APN Password If no password required just insert APN name only APN defaulted as CMNET APN name password not over 39 characters IP XXX XXX XXX XXX Port 1 65536 X 0 close GPRS default X 1 enable TCP X 2 enable UDP XXXXX should be in five digitals and in unit of 10 seconds XXXXX 00000 to disable this function XXXXX 00001 65535 time interval for sending GPRS packet and in unit of 10 seconds P 1 Out1 2 Out2 3 Out3 4 Out4 5 Out5 F O to disable the output 1 to enable the output ABCDE represents Outi Out2 Out3 Out4 Out5 respectively lf Aor BorCorDoreE 0 to disable the output 1 to enable the output 2 to remain previous status XX 00 to disable this function XX 01 99 to set this function It is in unit of minute Example If XX 10 MTO8 will enter power saving mode in 10 minutes after it is immobile User Manual of MT08 Set phone number for W O30 T T is the telephone number for wiretapping wiretapping and max 16 digits Set time zone difference W O32 T T 0 to disable this function T 1 65535 to set time difference in minutes to GMT Default value is GMT not necessary for those ahead of GMT For example either 120 or 120
Download Pdf Manuals
Related Search