50098-677 Rev A
Contents
1. into the control drawer phematic system and connection block nozzles e Turn the system on using the ON OFF switch Confirm the system powers up to the ENDODRY Storage and Drying System home screen To verify the ENDODRY Storage and Drying System is operational refer to the document 50098 679 INSTALLATION CHECKLIST to document and verify proper system installation Refer to the User Manual for the entry of operator and endoscope information MEDIVATORS Customer and Technical Support Toll Free Phone 1 800 444 4729 FAX 1 866 421 7696 wil Medivators BV Cantel Medical Asia Pacific Pte Ltd Medivators Inc Beijing Representative Office i Medivators Inc E MI D IVA O RS 14605 28th Avenue North Sourethweg 11 1A International Business Park Room 1801 Floor 18th Tower A Od Minneapolis MN 6422 PC Heerlen 05 01 Singapore 609933 Beijing Marriott Hotel Office Building A Cantel Medical Company 55447 4822 USA The Netherlands Tel 65 6227 9698 No 7 Jianguomen South Avenue Tel 1 763 553 3300 Tel 31 45 5 471 471 Fax 65 6225 6848 Dongcheng District Beijing 100005 China Fax 1 763 553 3387 Fax 31 45 5 429 595 Tel 86 10 65204039 www medivators com 2015 Medivators Inc All rights reserved 50098 677 A2. INSTALLATION calender E INSTRUCTIONS ENDODRY Storage amp Drying System This document provides guidance in the installation of the ENDODRY Storage and Drying System Ba READ THE ENTIRE DOCUMENT BEFORE STARTING INSTALLATION APPLICABLE DOCUMENTS e ENDODRY System Site Requirements e ENDODRY System Pre Installation Checklist e ENDODRY System Installation Verification Checklist e ENDODRY Storage and Drying System Users Manual TOOLS REQUIRED e 4mm hex wrench e 8mm hex wrench CUSTOMER REQUIREMENTS e The customer is responsible for preparing the facility site prior to the ENDODRY Storage and Drying System arrival including all required electrical and air supply needs INSTALLATION OF ENDOSTORE DRYING CABINET IMPORTANT Remove the drying cabinet and provided accessories from its packaging with care Please inspect the equipment upon arrival checking for any evidence of damage during shipping Inspect the equipment to ensure all supplied parts are complete QTY Description 1 ENDODRY Storage and Drying System barcode reader with cable and holder 2x barcode readers for pass thru models 1 power cord 1 air lines with quick connector 1 Users manual 1 LAN cable Move the ENDODRY Storage and Drying System to its final location Check the level of the cabinet front to back and left to right using a bubble level If leveling is required remove the four small white plugs in each corner of the base as
3. shown Use a 4mm hex wrench to adjust the level Replace the plugs when complete IMPORTANT For optimal user safety and operation it is recommended that the ENDODRY Storage and Drying System always be placed directly on the floor and not on an elevated platform type device z M EDIVATORS A Cantel Medical Company f Vor ffnen OEDS Netzstecker ziehen MEDIVATORS and ENDODRY are trademarks of Medivators Inc Install the supplied barcode scanner s and the holder s The barcode scanner holder s attach to the top of the cabinet as shown Use the supplied screws to attach Tighten the screw with a 8 mm hex wrench Note Two barcode scanners and holders are Supplied with the pass thru cabinet The barcode scanners on the pass thru cabinet are side dependent If they initially do not function properly swap the barcode scanners e Connect the power supply the air line and optional LAN connection to the panel located on the top of the system The wall outlet should be within the operators reach for easy unplugging NOTE Take care to clean the cabinet before operation Disinfect all contact surfaces with an approved surface disinfectant Use only surface disfectants appropriate for medical devices Chemicals need to be compatible with polyethylene terephthalate polyvinal cholride PVC aluminum and stainless steel For cleaning only use a lint free cloth Avoid saturating soluton
Download Pdf Manuals
Related Search