STANDARD SYSTEM Novel Electronic Designs
Contents
1. TEAM BOX SYSTEM Full Manual This is the quick reference version of the user s manual The full version may be downloaded from our website http www BuzzerSystems com doc Warranty Your Novel Electronic Designs Team Box Buzzer System has a five year watranty parts and labor All warranty service must be performed by NED Parts amp Service Refer to opposite side of this page for troubleshooting Replacement parts may be ordered by visiting our website System s requiring service may be returned to NED our repair service is quick and economical Refer to our website for contact information Team Box Lights when system is Lights if player ready was first to press button Pushbutton Lights A P o0 System Controller Press team s bonus Timekeeper button Buzzer can be button to light all players locks out players when loud or soft on one team time expires Press RESET to Hand held button resume play resets controller Novel Electronic Designs Inc BUZZERSYSTEMS COM Service amp Maintenance Power indicator on system controller won t light Player Light on team box won t light Pressing BONUS A B C or D doesn t cause any of the desired team s bulbs to light Pressing a player s activation button doesn t trigger the system Troubleshooting Power Pack not connected to system controller Power not available at the outlet Team module2. isn t connected to the team module cable What to do Verify power pack s cable is firmly plugged into the system controller s power connector Change to a different outlet Attach the team module cable to the faulty module A team module cable is not fully inserted into a module Light bulb is defective MODE switch is set to pause Team module cables not connected to system controller Pushbutton connector is not firmly seated in connector Defective push button Press connector into module to ensure connection is secure Replace bulb See instructions at bottom of page Set MODE to run Bonus only works in run mode Connect cables to system controller Ensure the plug is fully inserted into the pushbutton receptacle Disconnect the push button from the team module by gently pulling the push button cable from the module s connector Connect the replacement push button included in the Series IHI accessory pack LIGHT BULB REPLACEMENT The Team Box has five light bulbs on the panel facing the moderator These bulbs are ultra long life and will likely never need replaced Incandescent or filament bulbs will not work in these sockets If replacement is necessary please contact NED and specify your need for a 12 volt LED bulb and specify the color red or green When replacing bulb press bulb into socket twist and remove defective bulb
3. Novel Electronic Designs Inc BUZZERSYSTEMS COM
Download Pdf Manuals
Related Search