Home

User Manual - OV Solutions

image

Contents

1. These direction arrow buttons groups only appear when NCS Client preset style set as Office 2003 Visual Studio NET 2005 Office 2007 To Auto Hide a window only available when window is docked Either Right click in the window and select Auto Hide In the title bar for the window click the Auto Hide toggle button The Auto Hide function applies to all tab windows in a main window If one of the tab windows in a main window is set to Auto Hide all the other tabs will also Auto Hide To close an individual tab display window Right click on a tab and select Hide or click directly on the Close Window button on the top right corner of the window To display the window again go to the View menu point to Toolbars and then check the window you want to show Page 26 Central Management System NCS System Overview Another way to close a window is to uncheck a box in the Toolbars menu To move a toolbar Click on the double line on the left side of a toolbar and drag it to the position you want To hide or display a toolbar Go to the View menu point to Toolbars and then uncheck or check the toolbar you want to hide or show And if user drag to as an individual menu in window simply click the a button on the top right corner of the menu to close it To change the look of the NCS Client to a preset style In the View menu point to Application Look and choose one of the following pre
2. 2 In Config select Network Service and set up the following services e Live Streaming and Central Management These services are essential to run the NCS system Please start these two services e Remote Playback This service enables recorded video viewing and remote playback This service is also responsible for providing data for client backup Ensure this service works please also Start Recording Schedule to record video e Remote Desktop This service enables remote configuration of the main console 3 Select Guard RK Event and Action Configuration Event Action Sg we oO ee fd a G CAMO2 camera 1 ons 1 General Motion Send to Central Server Digital Input II System Video Preview 4 Inthe Event and Action Configuration window configure alarm events and insert the action Send to Central Server for events that you want to appear on the NCS system 5 Click OK to return to the main console 6 Inthe Start Menu select Start Smart Guard System to start detecting events SQL Server To configure SQL Server 1 In the Start menu point to All programs point to Microsoft SQL Server 2005 point to Configuration Tools and then select SQL Server Configuration Manager Page 16 Central Management System Getting Started with the NCS system L SOL Server Configuration Manager File Action View Help amp EX SQL Server Configuration Manager Local SQL Server 2005 Services z CH arya NNS Aeka anF
3. Apply Apply to Metadata Alarm Menu The Metadata Search Open Live Video Window Open Playback Window and Backup Recorded Video commands appear on the device alarm menu for Metadata devices The steps are the same as on the Camera Alarm Menu see pages 77 View Latest Open Alarm Query Alarm b Metadata Search Open Live Video Window Open Playback Window gt Backup Recorded Video System Infomation To search metadata transaction 1 Right click on a metadata indicator or on any metadata icon in the MapView display Click Metadata Search Metadata Search Dialog will display Check metadata devices from the device list Configure the starting and ending time and dates Enter keyword to search metadata transaction Check Search within result to filter the result Ss Ae Er JS Choose a result to display metadata transaction and video from associated camera EI ServerGroup Date Time Period Search Rss Test Server Keyword Sq Test Pos lem Test Pos M Search within result Demo OB Test Access Control Sq Test Pos DE Test LPR Date Time Somme Server n lll Speed D 9011 05 19 14 35 54 Test Server Test POS 2011 05 1909 Ur Speed Dome 2011 05 19 14 35 57 Test Server Test POS f 2011 05 1909 Cl post 2011 05 19 14 36 00 Test Server Test POS 2011 05 19 29 CIS pos 9011 05 19 14 36 03 Test Server Test POS 2011 05 19 F9 2011 05 19 14 36 06 Test Server Test POS 2011 05
4. IT Bold f taic f Undenine Show Server Name Text Background Transparency j 160 Color v Indicator Coverage Transparency zz j 160 Coverage Color SSS 3 gt Selected Indicator Color a gt Indicator Tip Delay Time os me m Miscellaneous Map View BackgroundColor C Tv Temperature Format Celsius Fahrenheit w K XxX Cancel Page 4 Central Management System Device Alarm Menus Device Alarm Menus When a user right clicks on a device indicator on a map or on a device s icon in the System Control window a Device Alarm menu is shown There are some commands which are common functions to all device alarm menus These are e View Latest Open Alarm shows the latest open alarm alarm with New status for the device e Query Alarm displays open alarms alarms with New status or alarms for any particular date for the device e System Information gives information about the server In addition the Device Alarm menu shows different options depending on what kind of device you right click on For a camera the menu shows the following options e Open Live Video Window opens a window with live video feed from the camera View Latest Open Alarm i f Query Al gt e Open Playback Window opens a recorded video playback window 6 oi Wiebe Deeg Open Playback Window gt s Backup Recorded Video saves a backup of recorded video from the dev
5. 3 Click the Edit button and point to Joystick Setting In Joystick Setting Window select the Active Joystick you want to use Select the function and the parameter from drop down menu for the button of joystick The function are as below e N A make the button ineffective e Go to Preset Point go to the preset point of the view on a matrix or a live video Select the parameter for the preset point Joystick Setting X Active Joystick DCZ v Button Function Parameter Button 1 Go to Preset Point Button 2 Go to Next Grid Button 3 Toggle Single Camera View Button 4 Switch Matrix Grid e Go to Previous Grid go to previous grid on a matrix e Go to Next Grid go to next grid on a matrix e Switch Matrix Grid switch grids of a matrix e Toggle Single Camera View toggle select camera to single view e Start Stop Autoscan start stop autoscan on a matrix e Zoom Wide zoom wide of the view on a matrix s Zoom Tele zoom tele of the view on a matrix e Switch Active Matrix switch into different matrix e Go to Matrix View go to Matrix List Window Page 88 9 kV Central Management System Matrix View E emmer E mme Joystick Setting Joystick Setting Active Joystick USB 2A8K GamePad v Active Joystick USB 2A8K GamePad Button Function Parameter Button Function Parameter Button 1 Goto Previous View Button 1 Goto Previous view v Button
6. H vie To add a new View Group Right click on Yew Group Lit and select Add View Group To add a new View 1 Right click on any View Group 7 Group and select Add View You will see the View Configuration window 2 Inserta name for the View in View Name 3 All licensed cameras will be under Available Cameras Select the cameras you want to add to the View and press Add Press to remove selected cameras 4 Use the buttons and to adjust sequence of cameras 5 Right click on any camera to choose a suitable stream profile 6 Click to switch between different matrix grids Page 48 Central Management System View Group Management 7 Click v to assign alarm video channels to show video on event You are able to define up to 16 different groups indicated with 16 different colors under Group Setting fis View Configuration View Name Available Cameras ES Hall Selected Cameras Test Server Test Server Test Server A Test Server A Test Server gt Test Server A Test Server gt Test Server A Test Server Test Server A Test Server A Test Server Vivotek IP 7161 Vivotek FD7141 JPN YO Camera Occlus Counting Missing Object Foreign Object Focus Lost QA Room Link YIO gt Test Server gt Test Server gt Test Server A Test Server Add Remove NY Streets Office Immervision oo oo Auto Scan Interval 2 sec z QA
7. Reconnection Check to enable auto reconnection to NCS Server NCS Matrix when connection is lost Record Setting Check to enable alarm triggered local recording on NCS client You may customize pre post record time and auto recycle settings Instant Playback Setting Configure pre post playback length under instant playback windows Miscellaneous Check Show central ID on server list and matrix list to display server device matrix ID number on server and matrix lists This is mainly for Joystick control For details please refer to p 88 To enable Recording on NCS Client or instant playback you MUST also start recording from Main Console NCS cannot access playback if Main Console has not recorded video Customizing Client Appearance The appearance of the NCS Client is customizable The System Control and Alarm Overview windows and their nine associated tab display windows can be moved or removed to four appearance types Floating A floating window can be moved to any position on the screen Docking A docking window is aligned with one of the four edges of the application window Auto Hide Docking windows can be set to AutoHide The window then displays only when you point to the area of the screen where the window is docked Hide Hide the windows can be removed from screen Toolbars also can be moved or removed The outlook of the client can also be changed to various preset styles To restore app
8. Sy Server Lst 2 Configuration t Ea J L cea j To rename a View Grid Tour View Group View Tour 1 Right click on the icon and label under Edit Mode 2 Click on Rename To remove a View Grid Tour View Group View Tour 1 Right click on the icon and label under Edit Mode 2 Click on Delete To edit a View Grid Tour View Group View Tour 1 Right click on the icon and label under Edit Mode 2 Click on Settings Under Edit Mode drag and drop to change sequence of Views View Groups View Tours Cameras and Grid Tours Page 51 Central Management System Network Management Network Management NCS Server Management On the NCS Server Window administrators can Kill Client change port of connect and limit the maximum client connections To kill a connected client 1 Double click on the NCS Server icon to open the NCS Server Window 2 Choose a client IP and click Kill Client To change connect port and maximum connections 1 Click Stop to cut all connections 2 Change port of connection and maximum connections 3 Click on Start to allow connections NCS Server License 30 Trial X Main Configuration Client Count 0 Kill Client Kill All Clients State IP Service Server Status Running Stop Options Zk cot To change the NCS Server password The default password of admin account is empty Modify the password from the client sof
9. 2 Click Delete 3 Click Yes in the confirmation window Page 34 Central Management System Coverage Coverage Coverage is a defined period or periods of time This is used for the following purposes e To define the times a user can log in to the system and use the NCS client This coverage is applied according to the local time of the NCS Client e To define the times that an alarm is active This coverage is applied according to the local time of the source Main Console server To carry out the functions described below you need to be in Edit Mode and Commit after setup see page 27 Adding Editing Removing Coverage To add a coverage 1 Ensure that the client is in Edit Mode and the Configuration window is selected 2 Right click on the Coverage folder icon JI Coverage then click Add Coverage Coverage Mode General O Specific Day Add Time Period Remove Time Period Clear All HEI AE te Gs Ted Oe OU 20 2 ee 28 3 Inthe Coverage Dialog window enter a coverage name and if you want a coverage description 4 Choose a coverage mode e General is for regular coverage periods e Specific Day means that this coverage applies to a specific date only Choose the date from the drop down list 5 Select the time periods you want for this coverage e Drag over the time periods you want Selected periods appear in blue e To remove periods select Remove Time Period and drag over the periods yo
10. 255 to 285 270 90 180 Apply to Page 32 Central Management System Servers Devices on Map 6 Choose an indicator le f Camera Configuration Select Camera Demo D Indicator Icon Iw Show coverage area Range Radian 255 Apply to 7 When the device is a camera select Show Coverage Area to set the Range and Radian 8 Click Apply to if you need to apply settings to other camera indicators 9 Click OK 10 The device indicator will appear on the map Drag it to the required location To drag a device indicator to a map from ServerView 1 Ensure that the map you want is displayed 2 Click on the ServerView window 3 Directly drag a device to the desired location on the map If you are in MapView and click on a device which has already been added to a map the map for that device will be displayed To remove a device indicator from a map 1 Right click the indicator 2 Click Delete 3 Click Yes in the confirmation window Edit Device Indicators An indicator image can be rotated mirrored or changed The image can also be set to refer to a different device than the one originally chosen To rotate a device indicator to a preset angle Once a device indicator has been added or dragged to a map the indicator image can be rotated This is useful to show which direction a camera is pointing 1 Right click the indicator or right click the
11. 3 Inthe Alarm Configuration window enter an alarm name and alarm description 4 Choose an alarm priority and an alarm owner from the drop down lists 5 Choose from the following settings e Choose a coverage default coverage is Always The coverage here is based on the alarm source device s local time e Enter a rearm interval If the rearm interval is too short default interval is 5 sec multiple alarms may be triggered by certain events such as motion e You can pick from two Close Alarm options If you want the alarm to close automatically when the triggering event ends check Auto Close Alarm You can also set a timer for the alarm to close automatically after a couple seconds e f you want to record video locally whenever this alarm is triggered check Recording on NCS Client Page A Central Management System Alarms 6 9 kV 7 e 9 To enable recording on NCS Client you must check Recording on the Client under Edit NCS Client Setting Record Setting See page 25 for details If you do not want to put the alarm into effect straight away check Disable Alarm If you want click Alarm Management Guide and enter text This text appears in the alarm detail window see page 65 The text also appears when users point to a device for which the alarm is active Select options in the Auto Notify NCS Client area If you want the map window to automatically display the map for the alarm s so
12. Timea Serer Name Date Time Address Cit State Zip Otner informatan Fax Email Contact Tima Password Permit Comment Start Caling Aarm One Information 2010 11 08 19 04 04 2070 11 08 19 04 04 GMT 08 00 Source Server Information 1230456 Leonardo 0987654321 0985692147 Always ES 225 Genersl Manager Ready to call Leonardo 0987654321 Lite 14 Call 1209 for security 2 Enable slann recording in section B 3 Lock gates from pier 47 to 96 Alarm Guide Critical admin ze Alarm Status Update F Reset The Alarm Management window gives details of four sections e Alarm Image The snapshot or icon image of the alarm e Tools Direct access to live video recorded video send channel to Matrix show related devices enable disable metadata display and print report e Alarm information Includes Alarm Name Source Device Event Type and Date Time client local time e Source Server information Includes Server Name Date Time source server local time and other contact details For more info on how to configure these settings please refer to page 29 e Contact History A quick link to contact key personnel A time based log to track status and process of current alarm For more info on how to configure these settings please refer to page 29 e Alarm Guide The guide for how to deal with thi
13. 2 Inthe Central Login window enter the IP address and port of the NCS Server PC The default port is 5180 3 Enter a user name and if required a password The default user name is admin and the default password is empty 4 Click OK To activate software license key s 1 Open License Manager Tool in Help menu 2 Select Activate tab check the NCS system in On line network environment 3 Insert the SN SN file or dongle to activate license 4 After software license is activated successfully please restart NCS Client Page 18 Central Management System Getting Started with the NCS System ES Please refer to page 56 for advanced settings To start up NCS Client automatically 1 In the Edit menu select NCS Client Setting Startup Je Enatle Auto Startus V Enable Auto Login User Account ase in Password e Password Confirm w K Xx Cancel 2 Inthe NCS Client Setting window select Enable Auto Startup and Enable Auto Login 3 Enter a user account and if required a password 4 Click OK Please refer to page 25 for advanced settings NCS Matrix To execute a single matrix display 1 Inthe Start menu point to All Programs then point to Central Management Client or Central Management Matrix and click NCS Matrix To configure the first matrix in a multiple matrix system 2 Ensure that the PC is configured to use multiple monitors 3 Inthe Start menu point to All Programs then poi
14. 2 Goto Next View Button 2 Button 3 Toggle Single Camera View Button 3 Button 4 Switch Screen Layout Button 4 rola a Button 5 Switch Active Matrix Button D Goto Next View Button 6 Start Stop Autoscan Button D Switch Screen Layout Button 7 Mia Button 7 Taggle Single Camera View Button N A Button 8 Start Stop Autoscan m Wide Zoom Tele Switch Active Matrix Goto MatrixView e Go to Server View go to Server List Window e Find Recording Server Focus to chosen Server on Server List Must be used with number buttons Format Press this button server number Enter E g To go to server number 8 press Find Recording Server 8 Enter To display server camera matrix numbers go to Edit NCS Client Setting Miscellaneous Show central ID on server list and matrix list e Open Live View Open Live View window for selected camera Must be used with number buttons Format Press this button camera number Enter E g To show live video of camera 12 from server 5 press Open Live View 5012 Enter e Open Instant Playback Open Instant Playback for selected camera Must be used with number buttons Format Press this button camera number Enter E g To show instant playback of camera 6 from server 3 press Open Instant Playback 3006 Enter e Show Camera to Matrix Show selected channel of camera on selected grid of matrix Format Press this button cam
15. 2 K NUUO Taipei The default top level map is provided by To change this see the section To edit map settings below Adding Editing Removing Maps To add a child map to a parent map 1 Ensure that the client is in Edit Mode and that the MapView window is selected 2 Right click on the icon for the parent map aa then click Add Map 3 Enter the required details 4 If you do not want to use the default indicator image please manual import another image and set to default For information on importing indicator images see page 32 5 Click OK The map you added appears in the tree structure of the MapView window 6 The map indicator appears on the parent map Drag it to the position you want To edit map settings 1 Right click on a map icon EF then click Settings 2 Enter the required settings then click OK To remove a map 1 Right click on a map icon TE 2 Select Delete and click Yes at the confirmation prompt You may sort maps and devices on the map list according to name or type To do this right click on any map under Edit mode and choose Sort by Name or Type You may also drag and drop icons to rearrange order manually Page 31 Central Management System Servers Devices on Map Servers Devices on Map Each Main Console server or device can be assigned to a map An indicator for the Main Console server or device is displayed on the map at the position you choose This allows quick and easy control
16. General Setting icon IC and then click OK Matrix Configuration Version 13 0 Pon bo Allow List Password Confirmed Password i tid 4 K X Cancel 3 In the Matrix Configuration window enter and confirm the password d Click OK To start up NCS Matrix automatically 1 Inthe Start menu point to All Programs point to Central Management Client and then select NCS Matrix to start the matrix 2 Point to the bottom right corner of the screen and then click on the General Setting icon Es 3 Click OK to open the Matrix Configuration window Port 5210 Allow List Password Confirmed Password V Run matrix when Windows startup s OK AS Cancel 4 Inthe Matrix Configuration window select Run Matrix when Windows startup 5 Click OK Page 53 Central Management System Importing Exporting NCS Client Configuration Importing Exporting NCS Client Configuration The NCS Client configuration can be saved to the local PC and loaded back again The configuration includes e Map display settings e Alarm log Settings e Matrix Settings e MatrixView configuration To save or load other settings such as server settings or map settings see Loading Saving NCS Server Configuration on page 55 To import or export NCS Client configuration EI NCS Client admin Trial File Edit View Tools Zoom Help a Be JE Import Configuration lla Export Configuration Logout Exit In th
17. Iris Select If the camera supports ImmerVision Lens and was correctly configured in Main Console an additional button Switch to ImmerVision will appear above the PTZ Control panel Click on the arrow to select between Original Quad Mode PTZ Mode Parameter Mode To open a recorded playback window 1 2 3 Right click on the indicator for the camera or on the camera s icon in the MapView display Point to Open Playback Window Select the period which want to display e Last Open Alarm it would open one minute recording video before last open alarm e Custom Time it can set Start End time to define the period of recording video E Custom Remote Playback Start Time 2008 03 27 02 45 FF x End Time 2008 03 27 02 45 FF x gt Time Zone NCS Client Source Server 7 Xo e One Minute Before open one minute before e Ten Minutes Before open ten minutes before e One Hour Before open one hour before The Remote Playback Window has full playback controls EI Remote Playback Window Test Server Streets Remote Playback Navigation 2011 5 18 F 07 40 04 oome aE Playback Period FF 07 39 27 FF 07 40 27 Export Period TFF 07 39 27 FF 07 40 27 Click Snapshot button al The snapshot is displayed and users can save the image or copy it to the clipboard Click Export Video button to save recorded video e Set up the cue in and c
18. Live Video Window for the camera is displayed 3 If you want to fix the window size at the original resolution check Fix original video resolution To view recorded video from a camera related to the alarm source I O device or metadata device 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Click Related Device Il then point to Open Playback Window 3 Ifyou want to fix the window size at the original resolution check Fix original video resolution To trigger a digital output device 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Click Related Device el then point to Trigger Digital Output and choose the output device you want to trigger To report print alarm details 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Click Report Print Alarm E then select the printer options you want and click OK To set the alarm state priority owner and Note There are two ways to manage alarm state priority and owner One is in the Alarm Management Window and the other is in the Batch Alarm Management Window which is opened directly from the alarm event in the Alarm Overview window e In the Alarm Detail window 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Inthe Alarm Status area select the State Priority owner and Note from the drop down l
19. POS Count the number of POS devices connected to the recording server e AC Count the number of access control devices connected to the recording server e LPR Count he number of license plate recognition devices connected to the recording server e Time Zone the time zone of the recording server e License Status the license status of the NSC system e Total License the total number of licenses including cameras metadata and I O devices e Remaining License the remaining number of licenses including cameras metadata and I O devices To use the Server Summary window 1 Inthe Tools menu click Server Summary 2 Usethe and buttons beside the server group folders to view server information 3 To refresh the information in the window click Refresh This refreshes Login User Recording status and Free Disk Space To refresh number of cameras IO and Time Zone select Synchronize Device while in Edit Mode To open a window with more detailed server information In the Server Summary window select a server then click Detail Page 92 Central Management System NCS Client Software version NCS Client Software version To view the NCS Client software version In the Standard Toolbar click to see version information Alternatively in the Help menu select About Central About NCS Client NCS Client Version 1 5 4 ee Copyright C 2004 10 Page 93 Central Management System Cross
20. Removing EE 35 USEF Groups and Heger 36 Addins Editing Removing User EE 36 Addin or duno E E 37 A CN 41 Ee 4 Page ii Central Management System Table of Contents Central Server Configuration WINDOW vascicarsnsersoressaonawss ca deatatanane Gnosadaebahinaiennd soaean Nessie mene dgoleh Moateins SaduebiARIAeeEReedELaaean ea dctassaneniNs 43 Mat SYS UCI E 46 Adding Editing Removing M GITIXES rieri arenito inn AKA AENEA EAEN a EEEN EANA TENANAN EENE ENEE EEE 46 VIEW Ee e Management esscriisnorusi Eaa Eaa Eaa r 48 Network EN E E 52 EE 52 Matr Eeer 52 Importing Exporting NCS Client Configuration cccccceeeeeseessseeeeeeseceeeesneeeeeseeoeessseeeeeeeooeesseeeeeseeooeasseeeessseoeens 54 Loading Saving NCS Server Configuration E 55 License Management TOON BEE 56 License Mandeement E 56 EE EE ere 57 Part o User Functions Day to Day USG sisimpenan Eae ea aE Seana 60 Operate ole 9 EE 61 Alarmi OVErviGW WMG E 62 ee 62 EEN 63 CO GD and ONU TO aac erst ao cents cet ENO pase case Gon Gnas TE ose vacation N EEEN EENEN 64 EE 64 Ee 65 Alarm Management Window and Batch Alarm Management 65 Exporiine Alarm Dala to GH Excel Fle arreire ineine Nene en i NENE EENE ENEN E ENAA swatlnanstanwudanaidandtiaancdateuabenaeeonaamtbentannehes 70 Ee 70 Map WINdOW EE 71 EE 71 Navigating Between Map and Serve rs Deuicesg Gs eeeeeeeeeaaeeeeeeeeeeaaaaeeeeeeeaaaaaseseeeeeaaaees 71 Searching TEE 72 IBY TCLS E T E ENEE EEE EE AEE EAE ET EN E
21. Room ROS Desktop VIVOTEK FD 1 D Link DCS 66 wall 3 Demo gt Demo A Demo A Speed Do A Speed Do gt Sneed Da lt j y Alarm Carousel Mode Simple iw v OK x Cancel By Clicking on the grids you assign them as alarm video channels which will display alarm associated video when alarms are triggered The corner of the grid will be marked with colors that stand for different groups refer to picture on the right For Alarm Configuration please refer to p 42 for details Note that if no grids are reserved for alarm videos they cannot be displayed in the matrix A notification will be shown in the status bar on the bottom of the NCS Client window Maximum channels for each view is 64 chn This includes those in Grid Tour Refer to the next section for more info on Grid Tour 8 Set Camera Tour Interval When the number of cameras exceeds the number of Matrix grids Camera Tour will be activated Camera Tour does not involve changes of Matrix grids For example if you assign 12 cameras into a 3x3 9 camera grid and set Camera Tour Interval at 2 seconds the first 9 cameras will be shown for 2 seconds then the remaining 3 cameras for another 2 seconds The circulation continues until manually stopped O 9 Set Alarm Tour Mode Simple or Salvo Alarm Tour takes effect when grids assigned as alarm video channels are all occupied and new alarm
22. and out with your mouse wheel and drag to Pan Tilt 9 Ifthe camera supports ImmerVision Lens and was correctly configured in Main Console the Switch to ImmerVision button will appear Click on the arrow to select between Original Quad Mode PTZ Mode Parameter Mode The default alarm playback period is 20 seconds including 5 seconds prior to the event and 15 seconds after This can be modified in Edit NCS Client Setting Instant Playback Setting Alternatively you can use Remote Playback system which has full playback controls Go to Remote Playback under Tools Page 68 Central Management System Alarm Overview Window To send Video to Matrix 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Click Send to Matrix and select previously set Matrix Group see Matrix System page 46 The video is sent to Matrix To view Metadata display 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Ifthe alarm has Metadata display the Metadata button will appear Click to disable enable display The Metadata transaction data is displayed on the right To view live video from a camera related to the alarm source I O device or metadata device 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Click Related Device el then point to Open Live Window and click the camera you want The
23. appear Click to enable audio stream If the camera is associated to metadata devices the Metadata button EJ will appear Click the button to disable metadata display Click on the Digital PTZ button to enable Digital PTZ Zoom in and out with your mouse wheel and drag to Pan Tilt Page 82 11 Central Management System Device Alarm Menus If the camera supports ImmerVision Lens and was correctly configured in Main Console the Switch to ImmerVision button will appear Click on the arrow to select between Original Quad Mode PTZ Mode Parameter Mode To backup recorded video 1 2 3 Right click on the metadata indicator or on the metadata icon in the MapView display Click Backup recorded video In the Remote Backup Recorded Video window choose a directory for the backup by pressing the URL button and browsing to the directory you want Setup the Time Zone and use setting Start End Time to select a period Use the checkboxes to select which cameras to back up video for Click on OK to start backup Remote Backup Recorded Video Ki Directory where the backup files will be created W UFL StartTime 2008 03 16 06 26 FF ix End Time 2008 03 16 06 26 FF ix Time Zone NCS Client Source Server Camera Camera Name Camera Model C Camera 1 4 amp Vv5100 C Camera 2 4 amp V3130 C Camera 3 IQeye511 Output Device Alarm Menu The Force Output comm
24. associated video is ready for display Under Simple Mode old alarm associated channels will be replaced by new ones Under Salvo Mode alarm associated channels will go into carousel and be displayed continuously until the alarm is closed O Q 10 Click OK to save settings Camera Tour of a view will be stopped when Alarm Tour starts View groups can also be saved directly from the Matrix List Click the Save view group button xj to do this Refer to p 86 for more Matrix settings To add a new Grid Tour Page 49 Central Management System View Group Manag ement 1 Right click on any View Group amp P and select Add Grid Tour You will see the Grid Tour Configuration window 2 Insert a name for the Grid Tour in Grid Tour Name Grid Tour Configuration Grid Tour Name Available Cameras Server Name A Test Server A Test Server A Test Server Test Server A Test Server gt Test Server A Test Server A Test Server A Test Server A Test Server A Test Server A Test Server A Test Server gt Test Server A Test Server A Test Server wm Camera Name Vivotek IP7161 Vivotek FD7141 JPN VO NY Streets Office Immervision Camera Occlusit Counting Missing Object Foreign Object Focus Lost QA Room Link VIO Selected Cameras Camera Name Server Name A Test Server TestSerer VO gt Test Sewer NY Add Grid Tour Inter
25. command in the Tools menu displays a NVR NDVR DVR control screen from the server For information about the NVR NDVR DVR software see its accompanying documentation To execute the Remote Playback shortcut 6 Inthe Tools menu click Remote Playback 7 For multiple monitor systems select which monitor you want the NVR NDVR DVR control screen to display on Monitor Selection Dialog E Monitor Resolution ji SA 1 1280 x 800 2 1920x1200 8 Click OK Page 91 Central Management System Server Summary Server Summary The Server Summary window displays summary information about all the source servers connected to the NCS Client Server Summary Finish to Update Refresh Name Login Recording Free Camera VO Count POS Count AC Count LPR Count Time Zone 3 ServerGroup Test Serwer admin Stopped 6 53GB 16 16 8 67 1 1 0 0 0 0 GMT 08 00 lt gt License Status Trial 29 days remaining License Type Camera VO POS Ac LPR Total License 48 8 2 2 2 Remaining License 32 0 1 2 2 This information consists of e Login the login name for the recording server e Recording the video recording status of the recording server e Free Disk Space remaining recording server disk space e Camera Count the number of camera licenses connected to the recording server e HO Count the number of input and output devices connected to the recording server e
26. directory you want Setup the Time Zone and use setting Start End Time to select a period Use the checkboxes to select which cameras to back up video for Check Backup Metadata Transaction to include metadata information in the backup Click on OK to start backup Remote Backup Recorded Video x Directory where the backup files will be created mm Start Time 2011 05 18 11 22 47 LF 7 d End Time 2011 05 18 11 22 47 tis Time Zone e NCS Client Source Server Camera Camera Name Camera Model A O vivotek IP7161 IP7161 O vivotek FD7141 FD7141 O JPN SNC RX530 Ovo IP7133 OnNny SNC CM120 O Streets SNC RZ450 O Office WV NPS502 O Immervision CJ Camera Occlusion wm AED EEN lt gt Backup Metadata Transaction To Set up Stream Profile 1 pA 3 Right click on the indicator for the camera or on the camera s icon in the MapView display Click Stream Profile In the Stream Profile Panel choose Recorded Original High Normal Low or Minimum for the stream profile to change video format frame rate resolution quality and bitrate Click Apply to set up If you want to apply the Stream Profile setting to other cameras click Apply to to set up another device Page 79 Central Management System Device Alarm Menus Stream Profile Panel x Transcoding Streamprofile Origina si video Format Frame Rate Resolution Quality BitRate
27. lime Zone Scenario Cross Time Zone Scenario The NCS System is easy to use across multiple time zones The NCS Server and the SQL database record all alarm times in UTC Coordinated Universal Time This enables the NCS Server to put the alarms in order before they are sent to the NCS Client The NCS Client converts the alarm times to the local time to enable users to manage alarms efficiently If required NCS Client users can access source devices local times in the Alarm Detail window and the Alarm Overview window see Alarm Log Settings on page 65 Main Console BRAZIL TOKYO LOS ANGELES UTC GMT UTC GMT 09 00 UTC GMT 02 00 AM 11 13 08 00 AM 00 13 PM 06 13 Alarm Alarm Alarm GEET Pere uae 4 Time AM 02 13 SQL DB v NCS Server UTC Time e gt UTC Time AM 02 13 AM 02 13 OU a Convert to Local Time NCS Client TAIWAN UTC GMT 08 00 AM 10 13 Page 94
28. metadata transactions Remote Desktop allows users to open a remote desktop In the Device Access area choose the devices which members of this User Group will be able to access If the devices have not been enabled in Device Access table users still don t have allow to use above functions Click OK The user group you added appears in the tree structure of the Configuration window You can also add a user group from the Edit menu by pointing to New Object clicking on User Group then following steps 4 6 above For quick add a new User Group please use Insert Copy option by right click on the User Group which you want to copy To edit a user group 1 2 3 4 Right click on the User Group icon for the user group you want to edit Select Edit User Group Edit the settings as required Click OK To remove a user group 1 2 Right click on the User Group icon for the user group you want to remove Select Delete Group and click Yes at the confirmation prompt Adding Editing Removing Users Add new users and modify or remove existing users You may choose to add Central Users directly in the system or import users from MS Active Directory MSAD as Windows Users To add a Central User 1 2 Ensure that the client is in Edit Mode and the Configuration window is selected Right click on the User folder icon 7 User then click Add Central User The User Configuration window appears Pag
29. the Recent and the Real Time displays It also includes the option to display the local time of the source Main Console server for alarm events To configure alarm log settings 1 In the Edit menu click Alarm Log Setting Alarm Log Setting Edit Fields X Recent Alarm V Show Alarm History Display Count 10 O 99 Available fields Show these fields in this order Image Size 80x60 isd Local Time Attachment Assigner Alarm Record Attachment Alarm Note Priority Real time Alarm Status Alarm Name Display Count 100 0 999 Event Type Source Server Show Source Server Local Time source Device Description Owner Output and Qutput Alarm Time Edit Fields 2 Inthe Alarm Log Setting window configure the following options e Inthe Recent Alarm area enter a display count in the range 0 to 99 This controls how many icons can be viewed at one time when the Recent tab is selected e Inthe Recent Alarm area select the Image Size from drop down list This controls the size of icons viewed when the Recent tab is selected There are four image size 80x60 160x120 240x180 320x240 e Inthe Real Time Alarm area enter a display count in the range O to 999 This controls how many alarm events can be viewed at one time when the Real Time tab is selected e f you want to view alarm event times in the local time at the source server check Show Source Server Local Time e To customize desired output fields in the Out
30. the name you want then click OK To remove a server group 1 Right click on the server group icon for the server group you want to remove 2 Select Delete and click Yes at the confirmation prompt Adding Editing Removing Servers Servers can be added to any server group When a server is added the devices on it must be synchronized with the NCS Client See page 30 This procedure ensures that the cameras input output devices and metadata devices on the server are available for monitoring To add a server 1 Ensure that the client is in Edit Mode and that the ServerView tab is selected 2 Right click on a server group icon then click Add Server 3 Enter the server details then click OK The Central Management Port should be the same as setup in Main Console server 4 The server you added should appear in the tree structure of the ServerView window To edit settings of an existing server 1 Go to server view under Edit Mode 2 Right click on an existing server and choose Settings 3 Click OK after configuration is done Page 29 Central Management System d Server Configuration Hasic Setting Server Name Local Central Monitoring Port 5170 IP Address 192 168 1 104 Live Streaming Port 51 50 Default User Name admin Remote Playback Port 51 60 Password Remote Desktop Port 51 40 Server Information State Michigan City Detroit Contact Name Contact Phone Coverage Leonardo 0987654
31. to uncheck all users Group Mapping Selected Windows users will be grouped according to default mapping MSAD Group Central User Group Administrator No Group Other Groups Administrator Default User Automatically add a new user group with the same name You may further modify group setting for each user manually Please refer to edit a Central User on page 38 for details Editable columns for Windows Users include Email Phone Number User Group Coverage Initial View Group and Disable User Account 3 Synchronization results will be displayed for confirmation Please refer to the default solution for all conflicts New accounts added from AD domain Accounts from AD domain removed Add to Central System Delete from Central System Page 39 Central Management System User Groups and Users 4 kV Account description modified Update description Encountered admin account Skip admin account Newly added account from AD domain conflicts Replace Central user account with existing central user account Current logged in account removed Skip login user Active Directory Sync Tool Conflicts Leer Name Description Solution SS aaa Add to Central System MSS Administrator GHAS RRE Add to Central Syster SZ ASPNET Account used for running the 4 Add to Central System PqyS2HelpAssistant ESSERE Add to Central System PISS SUPPORT 3 SEEGERS SEF Delete from Central System Uncheck items
32. video For more information please refer to p 49 on assigning alarm video channels to show video on event 7 Click OK to save settings View Group List S View Group List To load a View Group View View Tour H E Group A D I 3x3 Entrance 1 Goto Operate Mode gt 01 EN E 3 02 NY 2 Go to the View Group List Vpu Group Lit under the System IS 03 Tour Tow de Taiwan H Aa Exit Control Window EI Ded Hal e View Tour 3 To display all Views of a View Group right click on any of the E Group A 3x3 Entrance i Group A Ga Exit Groups and choose Load on Matrixes ERI Group A 2x2 Hall 4 To display one specific View or View Tour right click on the View sai View Tour and choose Show on Matrix Pg Serv Amap Ef con H vie To assign users to an initial matrix view group upon startup 1 Goto Edit Mode 2 Right click on a specific user under Configuration under the System Control Window 3 Click on Edit user 4 Under User Configuration choose a view group from the drop down list under Initial View Group This View group will be started automatically when this user logs in edit Mode 5 7 el e p tim Cosfigurtia ix Configuration e D x TEE 7 EC User Group A Administrator Dirim Pas awn Dpsegpkon Caia te Emis 7 Phir hari fori inaa Lier Ging Adm reyi RTE D Coverage Lena 0 Baai vie ep pepp a E Matrix Two
33. 1909 Op act 9011 05 19 14 36 09 Test Server Test POS 2011 05 1909 9011 05 19 14 36 12 Test Server Test POS 9011 05 19 Py 9011 05 19 14 36 15 Test Server Test POS 2011 05 1909 2011 05 19 14 36 19 Test Server Test POS 2011 05 1909 2011 05 19 14 36 21 Test Server e 2011 05 19 14 36 27 2011 05 19 14 36 30 Test Server Test POS ee pen zem 3 Sa 2011 05 19 14 36 24 TT BZ ege C01 MC 01 003630 l eng SI hace tad E p Lei ID Laf ieee 1 ES 1 APPLE JUICE 99 Page 80 Central Management System Device Alarm Menus To open a live video window 1 Right click on the metadata indicator or on the metadata icon in the MapView display 2 Click Open Live Video Window The Live Video Window for the metadata device is displayed Source Device 192 163 1 74 Source Address 192 169 1 74 Video Resolution 704x460 Bil Rate 249 kope Frame Rate 2 3 ae ms m H r 3 Ifyou want to adjust the video to the original video resolution check Adjust to original video resolution 4 Click Snapshot button The snapshot is displayed and users can save the image or copy it to the clipboard 5 Select Streaming profile button to choose different video quality Options include Original Main Recorded High Normal Low and Minimum 6 Ifthe camera is equipped with Audio function the Audio button will appear Click to enable audio stream 7 Click the EI button to disable metadata display 8 Click the P
34. 321 Always Zip 123456 Donatello 0912345678 Always Rafael 0963852741 Always Server Address Think Origin 18 Michaelangelo 0987412365 Always Account Type Superman Other Information lt gt Licenses for all servers and devices cameras I O devices and metadata devices need to be activated via NCS Client See Page 57 If you enter the Central Management port and click Detect the NCS system will auto detect the ports for Live Streaming Remote Playback and Remote Desktop Click the Server Info button to open a Server Information window and the Server Information will be displayed on the Alarm detail window when an alarm is active Contact Configuratio KE To add contacts to the server ng E i Name leonardo SSCS 1 Click on Add under Server Configuration ade Leonard Phone 0987654321 2 Complete the required info and click OK PA aa Pass Code 9527 Permit 225 To synchronize server devices Fax 0985632147 Right click on a server icon zs then click Synchronize Device Then all Emel engine com cameras metadata and input output devices of Main Console server will einen eerste i appear and be available for monitoring Contact Time Always e You must have enough licenses for the devices otherwise the devices without licenses will show disable Q icon X In the Tool menu select Server Summary to check the license status To edit ser
35. Alarm Search 5 Inthe Advance Alarm Search Dialog window check the box or boxes for the search criteria you want then choose the desired options if no options are selected for a given field it means search for all Advance Alarm Search Dialog he An TER M Source Device V Event Message wv Alarm Name namon Ss 3 DI 7 ServerGroup Al II General Motion EN 4 0 Local OC Foreign Object lv OwnerName ls Surveillance Server O Missing Object admin D O 3 O Room IT Focus Lost GG Alarm State CO Demo OO Camera Occlusion Oo gt Taipei Streets OS Camera Signal Lost Open ai CT 3 Avril Lavigne IC Disk Space Exhausted jw Alarm Priority CT 3 Ayumi Hamasaki OC System Health Unusual High i ts s O 3 Artemis O System Resource Failure OO 3 Office EI System Network Abnormal Plat ett OF Artemis Input 3 EI Digital Input Triggered i ls Clyde 105 Transaction Start Date Time O Surveillance Server CO Transaction End O Camera OO Open Cash Drawer ee AH D DI Camera O Connection Lost V From O Camera 3 O User defined 1 L QO Camera 4 OC User defined 2 io To bom e gt ass H O 3 Truen TCAM series 230 OC User defined 3 Lei Ki gt IC User defined 4 Le Alarm Name OwnerName Status Priority Alarm Note Start DateTime End DateTime Source Devi Event Message Outputto Pane 2 Edit Fields y 6 Setup the General options for criteria e Alarm Name choose a name from the drop
36. Central Management Server The InstallShield Wizard will install Central Management Server on your computer To continue click Next Please read the following bcense agreement carefully o not install or use the software until you have read and accepted all ofthe license Permission to use the software is conditional upon your agreeing to the license Installation or use of the software by you will be deemed to be acceptance of cense terms Acceptance will bind you to the license terms in a legally enforceable t with company i SOFTWARE LICENSE AND LIMITED WARRANTY This is an agreement between you the end user and company By using this software agree to become bound by the terms of this agreement Gi O I do not accept the terns of the license agreement lristallSteeld In the License Agreement window read the terms select accept the terms of the license agreement and then click Next Cust eed Moker eal nh Pham mim os manan Pis EEE LEAN ride and he hans of ihe compere fo cia wk In the Customer Information window enter your name and company and then click Next Page 12 Central Management System Installation Cp nal H REI ep ve L les Heal hi CEET P Bolus ppt Tien Fep bape ohi Phase gaki pH tir bap d A progeen lester be reabh Peotez the roi del aae le E eect aigh peaga e p a A rrara dT had e 6 Inthe Setup Type window select Complete and then click N
37. Central Management System NCS System Installation User Manual Ver 1 6 0 110630 001 Central Management System Table of Contents Table of Contents Table OF CONTENTS serosa stig ceca tia te a aaa a a aR ii Part E lee 4 SS SN ett IS HON ace E E ES cee ev neee EE 5 EE 3 SV SUC IVT REGUN INNIS EN 6 E E 6 IMU De MI EE 7 JET E 8 CIO E 8 EE Il TN GID E 13 NE M a E A E T N 14 Uninstalin NECS SYSTEM sien sires caecesss NAA AAA AAT ANAA EANO AAA RANEA AAA 15 Getting Started with the NCS SySITeI sssrin Aaaa EEOAE 16 Marni Conso e E 16 EE 16 IS Eeer 17 EEN I8 e EE 19 NCS SUC OVS E 21 NCS eer E 21 NCSC V CO NO E T Oa E A A canes ae E EEEE 22 EE ee 25 Cas omi OC CTE OCD asa yaa septs nares EA sau sarc eset wane aaa E E acne 25 Ee 27 INC EGET We WOW I eebe 27 OEE TT ODO saree dE 27 Part 2 Administrator Functions Setting Up the NCS System cccccssssssseeeseesssneeeseeesseeeseeesseeeseenseeessoenseeessoenss 28 SEET 29 Adding Editing Removin Server Groups aos raikan ean NENE AENEA ANEKERE KENEEN EEEE tees tien saenapeciansieyevavesentasebanseas peveveass 29 Addn E aun RETOU S ETVE TS iei E E EASAN EEEE EE ENNEA ENEE 29 Map CN 31 EE 31 Addin Editing Remon MAPS encis e a A a ieni e A a a a N a a E a a a a aaa Ne 31 DEFVEFS DEVICES on MAD osne a a 32 mporn e Indicator MAS crian aea Ea E EEEE eege 32 Adding Removing EELER ereecht EE eege EE dieanimeslalauadkeiaameeitedsataiactotds 32 EEN 33 COVEI EE 35 Adding Editing
38. E EE 72 eeh 74 Device Alarm Men s sissisodan iaaa aieiaiei e EN aai 75 Connon T U TONS ee 76 e SE E POI IN CII a E conte ce saree ana E te a eNO aa ae es admin NG ets ONG Aan ena Gene nants eatienoeenetaeat 80 Oupa Device Alarmi Menisi EE 83 EE T a E E A E oe td E E E E A iaeteotes 83 A E SCY e E S E eee cue dansadeadenteuatusetsentensuen sues 84 MAU ef 86 Eeer 56 HOWE EE 56 TOM SIUC OTTO NEE 88 LOO VVC WOO pni a a a aS 90 Remote Playback ORL s sees sa eb ren were esters sateen deo awed eeu ta yeanesteauesee eenbaesenaieieeen 91 Serer EE 92 NCS CIiEnt SOMW Ale VERSION once sescccensndeccersetenentseaceestsscsinswachoucstt onenesteansnentieceen aE a a E E AE REEE 93 Cross Hued e na aA a 94 Page iii Central Management System Part 1 NCS Overview Part 1 NCS Overview This section describes the NCS architecture and how to install and start the NCS system It includes the following sections System Introduction System Requirements Installation Getting Started with the NCS System and NCS Client Overview Page 4 Central Management System system Introduction System Introduction The Central Management System NCS is a powerful system which brings traditional central management systems out of the control room through Internet access The network based key operation system can manage unlimited combinations of analog and network cameras worldwide via unlimited working stations in different locations NCS is the universal sol
39. I O POS AC LPR Product Activate type f Online activation re Input SN C Import SN file Offline activation Step 1 Export server information file Step 2 Use Offline Tool to activate license and get offline license file Step 3 Import offline license file 2 The License Management Tool will appear Please refer to the tool overview below Page 56 License Management Tool Overview Activate Activate tab SN status Online activation Offline activation Transfer Transfer tab SN status Transfer type Activate Transfer License Activate License Activation Online 1 Open License Manager Tool 2 Select On line as Activate type Central Management System License Management Tool LPR Product Ze Online activation Ze Input SN C Import SN file C Activate from dongle activate Activate Offline activation Step 1 Export server information file WWanual key in SM on Offline Tool C Activate from dongle Export offline pach Step 2 Use Offline Tool to activate license and get offline license file Step 3 Import offline license file Import LPR Product Transfer type Ze Online C Offline transfer Transfer 3 Input the SN Serial number or Import SN file and then click on the Activate button Activate Transfer Activate type Ze Online activation Ze Input SN C Import SN f
40. Normal Low and Minimum O For cameras with two way audio support you may click and hold the Talk button for this function Talking will end when you release the button Please note alarm live view pop ups will be temporarily disabled when using the Talk function If the camera is equipped with Audio function the Audio button will appear Click to enable audio stream If the camera is associated to metadata devices the Metadata button EJ will appear Click the button to disable metadata display Click the PTZ button for the following PTZ controls Enable Digital PTZ Check to switch between digital physical PTZ Preset Point Choose if available from the drop down list Patrol or AutoPan Choose if available from the drop down list click to start and to stop Direction controls Up Down Left Right and Home Zoom out and zoom in controls Focus far and focus near controls Speed Dome Menu If supported this button enables the Setup Menu of Speed Dome cameras The menu will be displayed directly on the video channel Use the PTZ controls to navigate down the menu Other assigned keys with functions will be displayed on the screen for example the Focus button for Select Page Central Management System Device Alarm Menus PT Control Enable Digital PTZ Preset Point Fao er TUT PTZ oat Display Satup l loma a oat up Dingnostics zoom m m Focus m m setup Henu Focus
41. O Critical New Source Ser NVR_MainConsole admin 2009 12 07 22 58 36 133 AO Critical New Source Ser NDVR_MainConsole admin 2009 12 07 22 58 16 To export a single alarm event to Excel Right click on any alarm event in the Alarm Overview window then click Export Selected to Excel To export all alarm events in the Alarm Overview window to Excel Right click on any alarm event in the Alarm Overview window then click Export All to Excel Clearing Alarms All alarm events can be cleared from the Alarm Overview window To clear all alarm events Right click on any alarm event in the Alarm Overview window and then click Clear All Page 70 Central Management System Map Window Map Window Adjusting Map Appearance The display of map graphics in the Map window can be controlled The size of the map can be selected and the map moved in the window to show the required area The brightness of the map graphic can also be changed without affecting the brightness of device indicators on the map To control the size of a map Use the zoom in zoom out buttons or with the mouse wheel to adjust map size or click the magnify button and select one of the following options e Full Size e Fit Image e Fit Width e Fit Height To enable area zoom Click the magnify button and then select Area Zoom Click and drag with your mouse to draw a rectangle on the map This area will be magnified to fit the screen Click again to turn Area
42. TZ button for the following PTZ controls Enable Digital PTZ Check to switch between digital physical PTZ Preset Point Choose if available from the drop down list Patrol or AutoPan Choose if available from the drop down list click to start and to stop Direction controls Up Down Left Right and Home Zoom out and zoom in controls Focus far and focus near controls Speed Dome Menu If supported this button enables the Setup Menu of Speed Dome cameras The menu will be displayed directly on the video channel Use the PTZ controls to navigate down the menu Other assigned keys with functions will be displayed on the screen for example the Focus button for Select FTZ Control Enable Digital PTZ Freset Point setup Henu Ml Sot isplay detui EE TEIT Dingnostics Zoom m Pa Focus m Pa Speed Dome Menu Facus Iris Selec Page 81 Central Management System Device Alarm Menus If the camera supports ImmerVision Lens and was correctly configured in Main Console an additional button Switch to ImmerVision will appear above the PTZ Control panel Click on the arrow to select between Original Quad Mode PTZ Mode Parameter Mode To open a recorded playback window 1 2 3 Right click on the metadata indicator or on the metadata icon in the MapView display Point to Open Playback Window Select the period you want to display e Last Open Alarm this opens one mi
43. Test Phone SMTP server needs authentication Send Test Mail Zo cares To configure system auto notification via email 1 Inthe Edit menu click Server Configuration Select the Hotline tab 2 Inthe E Mail area of the Central Server Configuration window enter an SMTP server port and select Secure connection SSL 3 Enter an email sender an email subject and the body content of the email 4 Ifthe SMTP server requires authentication check the box and enter the user account name and password 5 If you want to send a test email click Send Test Mail Page 44 Central Management System Alarms To configure system auto notification via SMS 1 In the GSM Modem area of the Central Server Configuration window select a port and a baud rate from the drop down lists Enter a PIN code if required If you want to send a test message enter the destination phone number and click Send Test Message NCS system will auto filter the SMS for the same alarm one alarm can t trigger another SMS before one SMS send out Page 45 Central Management System Matrix System Matrix System The NCS Client provides feeds over the Internet to multiple video matrixes Each matrix can display images from up to 64 cameras along with text above each image including information about the camera and server To carry out the functions described below you need to be in Edit Mode and Co
44. The license of the software should be registered first when upgrading to NCS V1 3 0 or later versions Execute the License Management Tool to activate the license from a dongle or serial number allocated with the software package or de activate the license and then use it on another PC to activate it again Both On line and Off line status of PC environment could execute the tool to activate or transfer the license Below list 5 types of license management process process follow the Activation from dongle process e To de activate transfer the license with an NCS System connected to the network follow the Transfer Online process e To de activate transfer the license with an NCS System not connected to the network follow the Transfer Offline process Please refer to the chapter below for detailed steps of each process License Management Tool Overview Execute License Management Tool 1 Execute License Management Tool in Help of NCS Client To activate the license with an NCS System connected to the network follow the Activation Online process To activate the license with an NCS System not connected to the network follow the Activation Offline To activate the license from a dongle either with an NCS System connected or not connected to the network F License Management Tool Activate Transfer lt SN Cam
45. To continue click Next peck Lia 3 Complete installation as described in steps 3 7 of the To install NCS Alarm Server section on page 11 led HS Bie Wired 0 eba Tha bred oi heij cand her success uly stale MILI Cordial Hanagarani Ciani CS Feech ed than rca 4 Inthe InstallShield Wizard Complete dialog box click Finish NCS Matrix To install NCS Matrix 1 Insert the NCS installation CD Central Management System WR Goeed Cantat Management System NCS a amhiork naad key opscation system which can mase untimited Oppasse of aed IP comerne Watt wertiwale A operebe teen Vet UGA Wort Kings Shas AO Installation Guide of For SQL Server PC em SOL Server 2005 Express Please metal SQL Server 2005 7 For Central Server PC NCS Server Plasse insist NCS Server For Client PC NCS Client Paaso metal NOS Ces Ancida NOS Matic of For Matrix PC H NCS Matrix Plasse insist ME Manne Page 14 Central Management System Installation 2 Inthe Welcome to NCS window click NCS Matrix 3 Complete installation as described in steps 3 4 of the To install NCS Client section on page 13 Uninstalling NCS System To uninstall SQL Server In the Control Panel open Add or Remove Programs select and click on Remove button to uninstall four SQL objects Microsoft SQL Sever 2005 Native Client Setup Support Files VSS Writer lt 5 Add or Remove Programs Joe
46. Transfer button Page 58 Central Management System License Management Tool DH License Management Tool Activate Transfer Cam I O POS AC LPR Product 7AE4 OE4E BS80 F3 64 256 Transfer type Ze Online Offline Transfer 4 Restart NCS Client if transferred successfully Transfer Offline 1 Open License Manager Tool 2 Select Transfer Tab and then check Offline as Transfer type 3 Select SN and then click Transfer button to transfer SN H License Management Tool Activate Transfer LPR Product Transfer type e Online fe Offline Erre 4 Save Request file Copy request file to another PC connected to internet 5 Execute OffLineTool exe on another PC check Transfer SN and click Transfer to send request file to license server 6 Check Transfer Completed User must copy the request file to another PC and send it to the license server otherwise the SN cannot be reactivated NCS Server cannot connect to SQL Server without NCS Base License Page 59 Part 3 User Functions Day to Day Use This section describes function and operations of the client in day to day use including alarm management and view live video on NCS Matrix The commands which a user can access are governed by the user group privileges assigned by the administrator For this reason some of the commands described in the section may not be available to each user Page 60 Central Managem
47. Zoom off When Area Zoom is enabled click on the map to center it Drag the minimized icon on the lower right corner to move the map around To lock the map size Click the magnify button and then select Zoom Lock This prevents the accidental changing of the map size To turn Zoom Lock off click it again To pan when the map size is larger than the Map window Click and drag the map to the position you want To lock the map pan setting Click the magnify button and then select Pan Lock This prevents accidental panning of the map To turn Pan Lock off click it again Q The controls above can also be accessed on the Zoom menu To adjust map brightness Move the brightness slider J for the brightness you want Navigating Between Map and Servers Devices It is easy to navigate between different layers of maps and to show the maps for devices in various locations There are two ways of doing this clicking icons in MapView and using indicators on the map To navigate in MapView Ensure that the MapView window is selected Then either e Click the icon K for the map you want to display or e Click a device icon The map which the device indicator is on will display Page 7 1 Central Management System Map Window To navigate with indicators Ensure that the MapView window is selected Then click on a map indicator amp the Go to Parent Map button EN to go to the parent map K to see the unde
48. an be ordered according to Priority State Alarm Name Event Type Source Server Source Device Description Owner or Time Output 2 V DES ee Click on tab to ele D en G Gemesekiereeier EEA EAA ENE NIETO ze DEER H Critical New Cisco PVC 300 General Motion Jean Cisco PVC 300 1 General Motion admin 2010 11 30 145 0 rd er DG G H Critical New Cisco PVC 300 General Motion Jean Cisco PVC 300 1 General Motion admin 2010 11 30 11 5 H Critical New Cisco PVC 300 General Motion Jean Cisco PVC 300 1 General Motion admin 2010 11 30 11 5 H Critical New Cisco PVC 300 General Motion Jean Cisco PVC 300 1 General Motion admin 2010 11 30 11 5 i Critical New Cisco PVC 300 General Motion Jean Cisco PYC 300 1 General Motion admin 2010 11 30 11 5 To order lists in Output and Output 2 tabs Click the button at the top of the column you want to order by For example if you want to order by time click the Time button To reverse the order click the button again Message Log Tab This tab displays messages from the server The displayed messages are as follows e NCS server failed to execute SQL command e The disk space of NCS server is low Page 64 Central Management System Alarm Overview Window e The license of NCS server is missing e Failed to connect to matrix matrix name e Failed to connect live video on matrix matrix name Alarm Log Settings The Alarm Log Setting window features controls for
49. and appears on the device alarm menu for output devices To force output l 2 Right click on the indicator for the output device or on the output device s icon in the MapView display Click Force Output A signal is sent to trigger the output device Server Alarm Menu The Backup Record Video and Open Remote Desktop commands appear on the device alarm menu for servers To back up recorded video dhs 2 3 4 2 6 Right click on the indicator for the server or on the server s icon in the MapView display Click Backup recorded video In the Remote Backup Recorded Video window choose a directory for the backup by pressing the URL button and browsing to the directory you want Setup the Time Zone and use setting Start End Time to select a period Use the checkboxes to select which cameras to back up video for Click on OK to start backup To open a remote desktop for the server 1 2 3 Ensure that the source server has enabled the Remote Desktop network server Right click on the indicator for the server or on the server s icon in the MapView display Click Open Remote Desktop Page 83 Central Management System Device Alarm Menus Advance Alarm Search The Advance Alarm Search window provides a comprehensive set of filters to search for alarm events The results can be displayed either in the Output window or the Output 2 window To use Advance Alarm Search 4 Inthe Tools menu click Advance
50. and monitoring You can control the orientation of indicators as well as the appearance of accompanying text and the information it shows The NCS Client software comes with default indicator images but you can also import your own To carry out the functions described below you need to be in Edit Mode and Commit after setup see page 27 Importing Indicator Images To import an indicator image 1 Inthe Edit menu select Import Indicator Image 2 From the drop down list select the type of indicator image you want to import Import Indicator Image x T Defautt 3 Click Import browse to the required image file and open it d Click OK O If you want to set a specific image as the default for a file type select the image then select the Default checkbox Adding Removing Device Indicators There are two ways to add device indicators to a map MapView display and ServerView To add device indicators to a map in MapView 1 Ensure that the client is in Edit Mode and that the MapView window is selected 2 Click on the map icon Lei for the map you want to add an indicator to This displays the map 3 Right click on the map icon 4 Click Add Server Indicator Add Camera Indicator Add Metadata Indicator or Add I O Indicator as required 5 From the drop down list select a device Camera Configuration X 5 Select Camera Pe l Indicator Icon V Show coverage area Range 4 L 100 D Radian
51. ation commands are common to all device alarm menus To view the latest open alarm for a device 1 Right click on the indicator for the device or on the device s icon in the MapView display 2 Click View Latest Open Alarm 3 The Alarm Detail Window for the latest alarm opens For information on this window see page 65 To query alarms for a device 1 Right click on the indicator for the device or on the device s icon in the MapView display 2 Point to Query Alarm then choose which alarms you want to see e Open shows all open alarms e Today shows alarms from the current day e Custom specify a range on date and time then click OK System administrators set the length of time that alarms are stored on the server see page 43 If you choose a date for which alarm information is not stored the No alarm found on the device message Is displayed 3 The query results are displayed in the Output Output 2 tab For information on this window see page 64 To show information about the server 1 Right click on the indicator for the device or on the device s icon in the MapView display 2 Click System Information NAS 192 168 3 50 E General Device Status Alarm Login Account N Rmini gt Camera 1 r Vv No Alarm Time Zone GMT 08 00 A Camera 2 x No Alarm 23 Camera 3 x No Alarm 3 Camera 4 x No Alarm Recording Information gt Camera 5 v i No Alarm 3 Camera 6 x No Alarm x No Alarm s No Alarm Reco
52. can only save on NCS client PC The same user account login server with different PC can t load the original Matrix setting To reset matrix 1 Ensure that the NCS Client is logged in to the matrix as described above 2 Select the matrix you want to configure 3 Click on the arrow next to the Remove Camera on Matrix button 4 and click Reset matrix To toggle allow show video on event 1 Ensure that the NCS Client is logged in to the matrix as described above 2 Select the matrix you want to configure Page 8 Central Management System Matrix View Click the Toggle Allow Show Video on Event button i or select Edit Show On Event Mode Select grids you want to show video on events Clicking again can disable allow show video on events Choose Select All to toggle allow all grids show video on events Choose Clear All to disable allow all grids show video on events For advanced management click on Setting You are able to define up to 16 different groups indicated with 16 different colors under Group Setting To toggle tour 1 Ensure that the NCS Client is logged in to the matrix as described above 2 Select the matrix you want to configure 3 Click Toggle Tour button DI 4 Click Toggle Tour button again to disable tour Joystick Control Matrix system can be controlled by a joystick Prior to setup it requires a joystick device connected to NCS Client computer To setup Joystick Control 1 2
53. ck a source device NCS Server NCS Client Recording Server or All Choose from a list of log types Default includes all available options click again to deselect 2 3 Choose a Date or specify a time range under Date Time 4 Click on Search Log information will be displayed below 5 Click on Export to to export searched log information to Excel files Log Viewer System Log Source Device Ncs Client C Date el ZE Configuration Commit Date Time 2010 11 01 00 00 7 4 Client Login Client Login Fail to 2010 11 04 15 28 Client Logout Export Video Backup Video Export to Log Time Log Type Status Description 2010 11 01 17 25 37 Client Login Username admin IP 127 0 0 1 2010 11 01 17 29 32 Configuration Commit UserName admin IP 127 0 0 1 2010 11 01 17 34 30 Configuration Commit UserName admin IP 127 0 0 1 2010 11 01 20 23 27 Configuration Commit UserName admin IP 127 0 0 1 2010 11 01 21 16 00 Configuration Commit UserName admin IP 127 0 0 1 2010 11 02 11 34 48 Configuration Commit UserName admin IP 127 0 0 1 2010 11 02 11 36 29 Configuration Commit UserName admin IP 127 0 0 1 2010 11 03 11 52 28 Configuration Commit UserName admin IP 127 0 0 1 2010 11 03 19 21 22 Configuration Commit UserName admin IP 127 0 0 1 Page 90 Central Management System Remote Playback Shortcut Remote Playback Shortcut The Remote Playback
54. d in this window an Alarm Detail window can be opened This enables easy management of alarms There are five tabs in the window Recent Real Time Message Log Output and Output2 The first three tabs show recent real time alarm information and the remaining two tabs show query and search results The function and use of these tabs is described below Recent Tab Recent w J Sun pm A8 ha all E W 8 WW a 8 sde m ke di e A oe a Ee Te ae T a e a k d k e D Be a d d Zu BW 2 EA et E E Si Sa RL er ri deren les rie a Mie a f Recent SypRed tine Pa opat Teute Message too j The Recent tab gives a display of recent alarm events in icon format When the alarm event is triggered by a camera the icon normally shows a snapshot of the video feed from that camera at the time the alarm was triggered However when the camera signal is lost or the user does not have authority to view snapshots from that camera or when the event is triggered by another device other icons are displayed The various icons and their meanings are shown below Event Message Snapshot for Camera Events including General Motion Foreign Object Missing Object Focus Loss Camera Occlusion Event Message Picture for Camera Event of Signal Lost Event Message Picture for I O Event of Digital Input Triggered Event Message Picture for Metadata Event without an associated camera or no authorization to view vide
55. device from MapView 2 Click Rotate and choose an angle preset angle 0 45 90 135 180 225 270 or 315 degrees Q The radian range color and area of Camera Indicator can be set to show camera coverage Page 33 Central Management System Servers Devices on Map To rotate a device indicator to an arbitrary angle P 1 Right click the indicator or right click the device form MapView or click 28 icon from Edit toolbar 2 Click Rotate Arbitrary 3 Use the rotation handle to rotate the indicator to the desired angle then click to fix the angle 4 Click Rotate Arbitrary again to close this option To mirror a device indicator Indicator images can be mirrored flipped horizontally so that a mirror image is displayed One use would be to show in which direction a camera is pointing For example a default image may show a camera pointing left 1 Right click the indicator or right click the device form MapView 2 Click Mirror 3 Mirroring would then have it facing right The mirror command is a toggle To un mirror a previously mirrored indicator follow steps 1 and 2 again To change a device indicator image 1 Right click the indicator or right click the device form MapView 2 Click Settings 3 Select the indicator image you want then click OK To import a new indicator image see page 32 To remove a device indicator from a map 1 Right click the indicator or right click the device form MapView
56. down list e Owner Name choose a name from the drop down list e Alarm State choosing Open or Close in the first list reveals different states in the second list Open All New Assigned In Progress or Later in the second list Close All Close Auto Close or Ignore in the second list e Alarm Priority click the button to cycle through Greater than Equal to and Less than In the drop down list select a priority e Alarm Note enter keyword for search 7 Setup the Date Time for search e Date Time check Date and or Time and From and or To in the checkboxes Then choose the date s and time s you want Date Time J icon next to Time Pipe To setup one day as the search period click on the and select 1 day Or manual enable 22 and set date from 2008 3 16 From to 2008 3 1 T To Page 84 Central Management System Device Alarm Menus Choose the Source Device and Event Message e Source Device check the box or boxes for the devices you want to search If only check the Source Device without select any devices from tab the criteria would search for all devices e Event Message check the box or boxes for the event messages you want to search If only check the Event Message box without select any events from tab the criteria would search for all events Click Add Filter Criterion The search criteria you selected appear in the window You can edit or r
57. e Zi Currently installed programs C Show updates Sort by Name v Change or 3 z Remove j Microsoft SQL Server 2005 Size 211 00MB Programs Click here for support information Used rarely Last Used On 2008 2 25 x To change this program or remove it From your computer click Change or Remove change Remove ey ge Remove Add New Programs 7 Microsoft SQL Server Native Client Size 4 00MB Ee 7 Microsoft SQL Server Setup Support Files English Size 21 92MB s 7 Microsoft SQL Server V55 Writer Size 0 67MB Add Remove Windows j5 Microsoft User Mode Driver Framework Feature Pack 1 0 To uninstall the NCS system In the Start menu point to All programs point to Central Management Server Client Matrix and then click Uninstall NCS System ES Transfer all license connections and then transfer license base before you uninstall the NCS System Page 15 Central Management System Getting Started with the NCS System Getting Started with the NCS System Main Console Configuration To configure the Main Console 1 Run MainConsole exe E Network Service 192 168 1 84 7 0 0 0 0 Main Black White List Performance Client Count 0 Kill Client Kill All Clients State IP Camera Bitrate Kbps E e oO Streaming Eg 5 Remote Playback 3GPP Service Service DN Server Status Running Remote Desktop Options E ba ie Central Management Vv
58. e 3 Central Management System User Groups and Users o a SS 9 User Configuration User Mame Password Confirm Password Description Administrator Email leo line com Phone Number 0818504227 User Group Administrator si Coverage Always o Gg Initial View Group None a In the User Configuration window enter a user name If password access is required for this user enter and confirm a password Enter a description if needed If you want this user to receive auto alarm notifications by email or SMS enter the email address and or Cellphone number Choose a user group a coverage see page 35 and a matrix initial view group see page 47 from the drop down lists The coverage here is based on the NCS Client s local time Click OK The user you added appears in the tree structure of the Configuration window You can also add a Central user from the Edit menu by pointing to New Object clicking on User then following steps 3 8 above To edit a Central user 1 2 3 4 Right click on the user icon for the user you want to edit Select Edit User Edit the settings as required Click OK To remove a Central user 1 2 9 kV Right click on the user icon for the user you want to remove Select Delete User and click Yes at the confirmation prompt Enable Disable User Account option on User Configuration window also can reject this user account to login NCS system Y
59. e File menu select Import Configuration or Export Configuration Page 54 Central Management System Loading Saving NCS Server Configuration Loading Saving NCS Server Configuration The NCS Server configuration can be saved to the NCS Server PC and loaded back again It can also be reset to default status The configuration includes e Server settings e Map settings e Device settings on maps e User group settings e User settings e Alarm settings e Coverage settings e Indication import settings e Server configuration e Address and password of SQL Server To save load or reset NCS Server configuration 1 Click the icon from Taskbar and enter the password 2 NCS Configuration Save Load and Resetthe all the central management configurations including servers maps users alarms and so on Options Alarm Image Path CiProgram FilesiNCS ServenCMSEventimages M SQL Reconnection 1 Run NCS Server when windows startup Q Restore NCS Configuration will not clear the setting of SQL Server Reset NCS Configuration Res e ai NCS Alarm Server License 48 8 2 Trial 30 Days max j Main Configuration Backup SQL Server Status local Disconnect Server local v Password for sa EM ES URL In the Central Server window click Save Load or Reset NCS Configuration Page 55 Central Management System License Management Tool License Management Tool
60. e and the Configuration window is selected 2 Right click on the Alarm folder icon Alarm then click Add Alarm 2 Alarm Configuration General Alarm Name Alarm Priority Alarm Description Auto Notify NCS Client Demo Alarm for testing jw Goto Map Layer jw Popup Live Video Window Critical D admin Alarm Owner Coverage Rearm Interval Iw Close Alarm C Auto Close Alarm Ze Close Alarm After Recording on NCS Client Alarm Management Guide WC SererGroup ks Test Server Always E second 30 seconds OP Source Server Disconnec 0O System Log J Play Sound Demo Matrix el Group 1 l jw Show Related Camera to Matrix Send to Matrix Group Auto Notify NCS Server RI SererGroup 3 M Test Server HHH wl wi wi wi wl wi wi wi wi wi gt O Surveillance Server Vivotek IP7161 Vivotek FD7141 JPN VO H Streets Office Immervision Camera Occlusion Counting Missing Object C5 Metadata Channel Event ls Transaction Start Mrs Transaction End Mis Open Cash Drawer ls Connection Lost Mrs User defined 1 Mis User defined 2 Mics User defined 3 Mics User defined 4 Mics User defined 5 Miss User defined 6 Mis User defined 7 DIRIRIE x Vivotek IP 161 Vivotek FD7141 3 JPN 2 VU 2 NY Streets gt Office Immervision Camera Occlusion Counting gt Missing Object Foreign Object Focus Lost v
61. e features and services are disabled by default For new installations To configure the surface area of SQL Server use the Surface Area Configuration tool Configuring and Managing SQL Server Express For improved manageability and security SQL Server 2005 provides more control over the SQL Server surface area on your system To minimize the surface area the following default configurations have been applied to your instance of SQL server o TCPIIP connections are disabled EI Kloe Dinan ia diashlad Refer to the setup error logs For information describing any Failures that occurred during setup Click Finish to exit the installation wizard 14 In the Completing Microsoft SQL Server 2005 Setup dialog box click Finish NCS Server To install NCS Alarm Server 1 Insert the NCS installation CD Page 11 Central Management System Installation Central Management System NNR faced Cem ak Management System NCS 3 m hacrk Gage key opsration system which can ratte Unlimited cormunaheers of arog IF comers lopating weriwals A5 operele thea MEK ee SONS Stare ale of For SQL Server PC Pisase maal SQL Server 2005 A For Centrat Server PC NCS Server Piasse insist NCS Server SOL Server 2005 Express 7 For Client PC Pisase maal NOS Ce fineiade HOS Mats NCS Client of For Matrix PC NCS Matrix Plasse nats NCS Marne Welcome to the InstallShield Wizard for
62. e monitor3 monitor4 entering the port number 5230 for a third monitor and 5240 for a fourth and selecting the appropriate monitor 5 Click OK to save all configuration of Matrix To execute a matrix in a multiple matrix system 1 Ensure that the matrixes have been configured as described above Matrix Instance Dialog KL Instance Name matrix 1 Matrix 1 Matrix 2 Option In the Matrix Instance Dialog window choose the matrix you want in the drop down list and then click Start to start Matrix view 3 Repeat steps 1 and 2 to execute each monitor Page 20 Central Management System NCS System Overview NCS System Overview NCS Server Window Introduction The NCS Server features four main tab windows including The Main window controls the start stop NCS server as well as the client connection through kill client kill client all options Under the Configuration window you may setup the connection between SQL Server and NCS Server i D NCS Alarm Server m D NCS Alarm Server Main Configuration Backup License Status Main Configuration Backup License Status Client Count 1 SQL Server Status local Connected State IP Running 192 168 1 68 Server ilocal X Password for sa bes NCS Configuration ONET Save Load and Resetthe all the central management configurations including Kill Client Kill All Clients servers maps users alarms and so o
63. e of the Configuration window To edit an alarm 1 2 3 4 Right click on the icon 2 for the alarm you want to edit Select Edit Alarm Edit the settings as required Click OK To remove an alarm 1 2 Right click on the icon 2 for the alarm you want to remove Select Delete Alarm and click Yes at the confirmation prompt Central Server Configuration Window The Central Server Configuration window controls how the server keeps alarm records and also GSM and E Mail server settings for auto notification of alarms to users Go to Edit Server Configuration under edit mode for this window e If necessary consult with your IT administrator for details on these settings Central Server Configuration LG Alarm Hotline Alarm Recycle Scheduled Central Backup Keep Closed Alarms 180 day s jw Enable Scheduled Central Backup i Keep All other Alarms 180 dayis Start Time 14 00 Auto recycle alarm image when Recurrence Daily ei storage is less than 5 Every 1 day s To configure server alarm records 1 2 9 9 In the Edit menu click Server Configuration In the Alarm Recycle area of the Central Server Configuration window enter the number of days to keep closed alarms and all other alarms Set a storage limit for alarm images on percentage Recycling will be triggered under the desired remaining percentage of storage space The default period of Keep Closed Alarms is 180 da
64. e user and administrator accounts Enable User Instances This option enables users without administrator permissions to run a separate instance of the SQL Server Express Database Engine Clad This option adds the user who is running the SQL Server Express installation program to the SQL Server System Administrator role By default users on Microsoft Windows Vista operating system are not members of the SQL Server System Administrator role C ee e 10 In the Configuration Options dialog box select Enable User Instances option and then click Next Microsoft SQL Server 2005 Express Edition Setup Error and Usage Report Settings Help Microsoft improve some of the SQL Server 2005 components 4 and services Sa Automatically send Error reports For SQL Server 2005 to Microsoft or your corporate error Oo reporting server Error reports include information regarding the condition of SQL Server 2005 when an error occurred your hardware configuration and other data Error reports may unintentionally include personal information which will not be used by Microsoft Automatically send Feature Usage data for SQL Server 2005 to Microsoft Usage data includes anonymous information about your hardware configuration and how you use our software and services i By installing Microsoft SQL Server 2005 SQL Server and its components will be configured to automatically send Fatal service error reports to Microsoft or a Corporate Er
65. earance back to default please go to View menu and click on Reset Window Placement Page 25 Central Management System NCS System Overview To move a main window Click the title bar at the top of the window and drag it to the position you want If you want it to dock at one of the edges of the NCS Client window drag it to one of the direction arrow buttons There are three direction arrow buttons groups of different windows refer next page The Central group of Map Window it allow move window to four edge of Map window The Outside group of NCS Client Window it allow move window to four edge of Map window The Attached group of individual window it allow move window to four edge of individual window and move to be an associated tab display windows To move an individual tab display window Right click on a tab and select Floating or click directly on the tab and drag the window to the position you want If you want it to dock at one of the edges of the NCS Client window drag it to one of the blue direction arrow buttons The Auto Hide function can now be applied to that tab window individually To move an individual tab display window to a main window Right click on a tab and select Docking or click directly on the tab and drag it to a tab bar in a main window eis ts Tne Flo Edt Weg Io Za ek EE BW EL EE Fe SE 7 Castor Ee r Se i s Outside Group spe m ari J tire EEI alae R z
66. emove the set of search criteria you have just created or add another set of search criteria e To edit a set of search criteria select that set choose filter options as described above then click Update Filter Criterion e To remove a set of search criteria select that set then click Delete Filter Criterion e To add another set of search criteria choose filter options as described above then click Add Filter Criterion the search result would include each combination of all criteria By default search results are displayed in the Output window If you want the results to be displayed in the Output 2 window check Output to Pane 2 To customize desired output fields in the Output and Output2 windows click Edit Fields For details on Edit Fields please refer to page 65 Click Search Page 85 Central Management System Matrix View Matrix View The NCS Client provides feeds over the Internet to multiple video matrixes Each matrix can display images from up to 64 cameras along with text above each image including information about the camera and server Matrixes can also be configured to show video from a camera when an alarm event occurs To display video on a matrix the NCS client must be logged in to that matrix Once logged in the matrix display can be configured and cameras chosen Matrix View Toolbar The Matrix View Toolbar has the following buttons e Login Logout matrix amp E the NCS Clien
67. ent System Operate Toolbar Operate Toolbar The Operate toolbar controls common functions connected with map view display and control of actions triggered by alarms 2 EN fo Fe e It includes seven buttons e The Disable Go to Map button When selected alarm events cannot change the map view e The Disable Popup button T When selected alarm events cannot trigger a live video popup e The Disable Link between Map and Matrix button When selected links between Map and Matrix View devices cannot be displayed on the NCS Client O If users enable Link between Map and Matrix selected cameras on the map can be highlighted on the Matrix View and vice versa e The Disable to Matrix button E When selected alarm events cannot send alarm source camera and related camera video feed to matrixes e The Disable Matrix Popup button SS When selected video of new alarm events cannot replace old events on the Matrix if the Matrix is full and users do not close old events e The Close Sound button e When selected alarm events cannot trigger a sound e The Lock System button L Click to minimize system to taskbar Please note to unlock the system you must input username and password Page l Central Management System Alarm Overview Window Alarm Overview Window The Alarm Overview window shows recent alarm events in various formats and is also used to show alarm query results and log messages For any alarm displaye
68. era number Enter matrix and grid number Enter E g To show live video of camera 3 from server 5 to grid 11 of matrix 15 press Show Camera to Matrix 5003 Enter 15011 Enter e Switch Stream Profile Press to switch between different stream profiles of Live View or matrix views Sequence of stream profiles NCS Client Original Recorded High Normal Low Minimum e Take Snapshot Press to take a snapshot of current Live View or Playback window e Play Playback Press to play Playback e Pause Playback Press to Pause Playback e Stop Playback Press to Stop Playback e Numbers 0 9 Assign numbers to input server camera matrix numbers e Enter Confirm commands Page 89 Central Management System Log Viewer Log Viewer The Central System Log Viewer can be accessed from the Tools menu You are able to search and export a checklist of events according to source device and time date EI NCS Client admin Trial File Edit View Tools Zoom Help i Edit Mode Server Summary Server Liste Central Server Information ServerGroup Central System Log Viewer Local gt Q Roo Advance Alarm Search gt Demo Real time Alarm Filter gt gt Taipei gt Aert La Central Backup gt Ayumi Central Backup Status gt Artemis gt Office Remote Playback Clyde 3 E Cimata Video Matrix To Search and Export log information 1 Pi
69. erver and sa password you want to connect to 2 Inthe NCS Server dialog box click OK This is only required the first time you start NCS server Page 1 7 Central Management System Getting Started with the NCS System DI NCS Alarm Server License 49 8 2 Trial 30 Days el C RI Main Coanfiguratan Backup SOL Server Status acral Connected Serwer local e Password for sa MCS Configuration Save Load and Reseithe all ihe central management configurations including servers Maps users alarms and so on Save Load Reset NCS Configuration Options M SOL Reconnection 1 Run NES Server when windows sta up ET 3 The configuration of NCS Alarm Server e In the Configuration tab of Central Server window enter the IP address of the SQL Server and then enter and confirm the password set when installing SQL Server see page 10 e Specify a URL at which to store all alarm images e Select Run NCS Server when Windows starts up if you want NCS Server to startup automatically at Windows startup 4 Inthe Main table of this window check the server has been Start and click OK The NCS Server must be executed before the NCS Client can be executed NCS Client To configure and execute the NCS Client 1 Inthe Start menu point to All Programs point to Central Management Client and then select NCS Client Server Url f 92 16811 Port 5180 User Name admin Password
70. ext LTE EE Rapp io Inataf The vrai sec bei iHa rer Chek Leed ro beg he eds dE p ea a res en of pou vi alinn vip kk Dech Ikktsecgdineet 7 Inthe InstallShield Wizard window click Next 9 SQL Native Client is the necessary component to run NCS Server Would you like to install now recommended 8 aai ES ed Wird C meihe Tha kri aE habi eard har cuccesttuly roaie MULL Cori Nansmgraergd Jase bF rehe emt haa 9 Inthe InstallShield Wizard Complete dialog box click Finish NCS Client To install NCS Client include Matrix 1 Insert the NCS installation CD Page 13 Central Management System Installation Central Management System WR fused Cantat Management System NCS a emhacek Gage key oparation system which san Fatze unlimited oorwinabens of grote FP Corner e loki wettklwake at Opereie eat Viet LD out kr Shere Stare za installation Guide of For SQL Server PC SOL Server 2005 Express Pisase mal SQL Server 2005 7 For Central Server PC Ncs Serer Plasse insist NCS Server 7 For Client PC NCS Client Plaaze metal MS Oe mpode HOS Ats of For Matrix PC NCS Matrix Plasse ts NCS Matix 2 Inthe Welcome to NCS window click NCS Client Central Management Client InstallShie iza Welcome to the InstallShield Wizard for Central Management Client The InstallShield Wizard will install Central Management Client on your computer
71. from the link in the message or from the toolbox directory of installed CD al Microsoft SQL Server 2005 Setup End User License Agreement MICROSOFT SOFTWARE LICENSE TERMS A MICROSOFT SOL SERVER 2005 EXPRESS EDITION SERVICE PACK 2 These license terms are an agreement between Microsoft Corporation or based on where you live one of its affiliates and you Please read them They apply to the software named above which includes the media on which you received it if any The terms also apply to any Microsoft updates supplements Internet based services and 3 Inthe End User License Agreement dialog box read the terms check I accept the licensing terms and conditions and then click Next Page 8 Central Management System Installation call Microsoft SOL Server 2005 Setup X call Microsoft SOL Server 2005 Setup X Installing Prerequisites Installs software components required prior to installing SOL Server Installing Prerequisites Installs software components required prior to installing SOL Server SOL Server Component Update will install the following components SOL Server Component Update will install the following components required for SQL Server Setup required for SQL Server Setup Microsoft SQL Native Client VY Microsoft SOL Native Client Microsoft SOL Server 2005 Setup Support Files VY Microsoft SOL Server 2005 Setup Support Files Click Install to continue The requ
72. ice Rese est te ream rrone in the directory you specify System Information For a metadata device the menu shows the following options e Metadata Search searches metadata transaction by date time and keyword View Latest Open Alarm e Open Live Video Window opens a window with live video feed from the SL aise Se associated camera E Metadata Search Open Live Video Window e Open Playback Window b e Open Playback Window opens a recorded video playback window Backup Recorded Video System Infomation e Backup Recorded Video saves a backup of recorded video from the device in the directory you specify Force Output For an output device the menu shows the following option f System Information e Force Output triggers a digital output device such as an audible alarm signal For a server the menu shows the following options e Open Remote Desktop opens a remote desktop for the server al j S been Alarm e Backup Record Video backup of ded video f Il of PS Steer tntiraton p saves a backup of recorded video from any or all o Keeper Backup Record Video the cameras on the server in the directory you specify The same menu is available by right clicking on icons of cameras metadata devices IO devices recording servers under Operate Mode Page 5 Central Management System Device Alarm Menus Common Functions The View Latest Open Alarm Query Alarm and System Inform
73. iew window will also be highlighted 5 If you want to search through multiple indicator names which include the same term click Find Next until the indicator you want is found Click Find Previous to go back to the previous found indicator Q You can also search for indicators by entering a string in the Search box and pressing Enter Map Indicators Indicators on a map provide a graphical representation of the connection and alarm states of the devices or servers they represent or for map indicators the alarm state of devices on their child maps The meaning of the various graphics is given below O Page 72 Camera is connected and has no alarm Central Management System Map Window Camera is disconnected and has no alarm Camera is connected and has New alarm Camera is connected and has Assigned In Progress or Later alarm Server is connected and has no alarm Server is disconnected and has no alarm Server is connected and has New alarm Server is connected and has Assigned In Progress or Later alarm POS is connected and has no alarm POS is disconnected and has no alarm POS is connected and has New alarm POS is connected and has Assigned In Progress or Later alarm Access Control is connected and has no alarm Access Control is disconnected and has no alarm Access Control is connected and has New alarm Access Control is connected and has Assigned In Progress or Later alarm License Plate Recognit
74. ile EN C Activate fram dongle 4 Restart NCS Client if activated successfully Page 5 Central Management System License Management Tool Activation Offline 1 Open License Manager Tool 2 Select Offline as Activate type 3 Select Manual key in SN on Offline Tool or Activate from dongle then click Export offline pack 4 Save Request file and then take it to another PC connected to Internet C Documents and Settings k H ABRE REE BY RHR e Otr H Or Pes S AL D lo License X HRS offline reg Sw ENGR e NN LicenseTool dil msver80 dll x 5 Execute OffLineTool exe on another PC Input SN or SN file or insert dongle then click Activate to send request file to license server Offline Tool Information Activate new SN Please input SN Input type Server Information file path C Documents and Set SN input Input SN Import SN file r na 6 Save License file and then take it to the original NCS Client of the NCS System OffLineTool x i Please select a filename to save as a new license file 7 Open License Manager Tool from NCS Client again select Import license file and then click the Import button to activate 8 Restart NCS Client if activated successfully Transfer License Transfer Online 1 Open License Manager Tool 2 Select Transfer Tab and then check Online as Transfer type 3 Select SN and click on
75. inur He Protocols for CMALARMLOG Y Shared Memory Enabled ion 3 Named Pipes Disabled TCP IP Disabled Y VIA Disabled Enable Help 2 Inthe SQL Server Configuration Manager window select Protocols for CMALARMLOG right click TCP IP and then select Enable to enable TCP IP protocol TCPAP Properties Protocol IP Addresses Active Yes Enabled No IP Address 192 168 1 84 P Dynamic Po 0 E Active Yes Enabled No IP Address 127 0 0 1 TCP Dynamic Ports 0 E TCP Dynamic Ports 0 TCP Port TCP port Apply 3 Double click TCP IP then in the TCP IP Properties window select the IP Addresses tab 4 Enter 1433 as the TCP port in IP1 IP2 and IPAII and then click OK if SOL Server Configuration Manager File Action View Help ft EX aD m t O ere onfiouration Manane ocal E SQL Server 2005 Services z e ane gration DSQL Server Browser Stopp 7 l Protocols for CMALARMLOG Stop 8 SQL Native Client Configuration Pause Properties Help 5 Inthe SQL Server Configuration Manager window select SQL Server 2005 Services right click SQL Server CMALARMLOG and then select Restart 6 Ensure that any firewall allows access through port 1433 NCS Alarm Server To configure NCS Server 1 Inthe Start menu point to All programs point to Central Management Server and then select NCS Server NCS Server e jl Please specify the SQL s
76. ion is connected and has no alarm License Plate Recognition is disconnected and has no alarm License Plate Recognition is connected and has New alarm License Plate Recognition is connected and has Assigned In Progress or Later alarm Input device is connected and has no alarm Input device is disconnected and has no alarm Page 73 Central Management System Map Window We Input device is triggered and has no alarm a Input device is triggered and has New alarm gt Ar KD Input device is triggered and has Assigned In Progress or Later alarm Output device is connected but not triggered x Output device is disconnected Output device is connected and triggered 6 There is no alarm on underlying map There are New alarms on underlying map oe There are Assigned In Progress or Later alarms on underlying map Map Display Settings You can control the appearance of text which accompanies device indicators and the information it shows To change the map display settings In the Edit Menu click Map Display Setting and choose the desired configuration e For text displayed above device indicators select the font font size font color and any font effects desired e f you want the server name displayed alongside the device name select Show Server Name e Select the background color background transparency and camera coverage color for device indicator text d Text on Map Font Arial DN Color Jeng
77. ired components were installed successfully i Cancel 1 Cancel 4 Inthe Installing Prerequisites dialog box click Install to continue update and then click Next to continue installation Welcome to the Microsoft SQL Server Installation Wizard Setup will help you install modify or remove Microsoft SOL Server To continue click Next Cancel 5 Inthe Welcome to the Microsoft SQL Server Installation Wizard dialog box click Next to install Gi Microsoft SOL Server 2005 Setup x System Configuration Check Wait while the system is checked for potential installation problems Ga 13 Total 0 Error Success 13 Success D Warning Details Action Status Message Minimum Hardware Requirement Success Pending Reboot Requirement Success Default Installation Path Permission Re Success Internet Explorer Requirement Success COM Plus Catalog Requirement Success ASP Net Version Registration Require Success Minimum MDAC Version Requirement Success Edition Change Check Success Filter Stop Help 6 In the System Configuration Check dialog box click Next icrosoft Server Express Edition Setup Registration Information The following information will personalize your installation i L The Name field must be filled in prior to proceeding The Company field is optional Company NUUO Iv Hide advanced configuration options 7 Inthe Registration Inf
78. ists If you want to reset these options to the settings when you opened the window click Reset 3 Click Update to manage this alarm e In the Batch Alarm Management window Batch Alarm Management x Status New v 1 Right click on any alarm event in the Alarm Overview window then click so Ge Batch Alarm Management aes a RR Note 2 Inthe Batch Alarm Management window select the State Priority owner and Note from the drop down lists Click OK Page 69 Central Management System Alarm Overview Window Exporting Alarm Data to an Excel File Alarm data can be exported to an Excel file You can do this for a single selected alarm or for all alarms in the Alarm Overview window The columns in the exported file are including AlarmName Priority State EventT ype SourceDevice Owner AlarmTime e a B C D E F G H I K L 1 Abeohlag bio State EventT ype SourceSery SourceDevice Owner AlarmTime 125 AO Critical New Source Ser NVR_MainConsole admin 2009 12 21 20 26 54 126 AO Critical New Source Ser NDVR_MainConsole admin 2009 12 21 20 26 34 127 AO Critical New Source Ser NVR_MainConsole admin 2009 12 20 23 19 12 128 AO Critical New Source Ser NDVR_MainConsole admin 2009 12 20 23 18 52 129 AO Critical New Source Ser NVR_MainConsole admin 2009 12 10 20 21 22 130 AO Critical New Source Ser NDVR_MainConsole admin 2009 12 10 20 21 02 131 A0 Critical New Source Ser NAS admin 2009 12 09 01 56 55 132 A
79. ld have a Intel P35 i975x motherboard which can support two display cards Each display card should be the same model to avoid hardware conflicts Page Central Management System Installation Installation The NCS Installation CD contains the software you need to run the complete NCS system If you are installing the system on multiple PCs as described earlier install the appropriate software for each PC For the PC running SQL Server install SQL Server 2005 Express For the central server PC install NCS Server For client PCs install NCS Client e For PCs displaying video matrixes install NCS Matrix The following sections describe installation of each element of the NCS system SQL Server 2005 Express To install SQL Server 2005 Express 1 Insert the NCS installation CD Welcome to NCS X Central Mana Installation Guide of For SQL Server PC Dal SQL Server 2005 Express Please install SQL Server 2005 For Central Server PC NCS Serer Please metal NCS Server 7 Por Client PC NCS Client Please install NCS Cent include NCS Matos off For Matrix PC NCS Matrix Please Msta NOS Matnx For further installation steps please refer to NCS User Manual 2 Inthe Welcome to NCS window click SQL Server 2005 Express lf you do not have Microsoft Net Framework 2 0 and Windows Installer 3 1 installed a message will appear Download and install the application
80. m One Local Taipei Streets General Motion 2010 11 04 10 45 41 Local 201 0 11 04 10 45 41 GMT 08 00 Alarm Status Status New e Critical e admin e Ges Alarm Management Owner Note Ces a View Alarm Image allows users to see a snapshot from the camera as an icon in the Recent display see page 62 and view snapshot on Alarm detail Window Page 36 5 6 9 9 Central Management System User Groups and Users Open Live Video allows users to open a live video window to view image of the camera and related devices from the Alarm Detail window or by right clicking on a camera indicator Open Backup Recorded Video allows users to open or back up recorded video of the camera and related devices from the Alarm Detail Window or by right clicking on a camera indicator PTZ Control allows users to control the PTZ pan tilt zoom settings of compatible cameras This option only works when users also have Open Live Video authority Priority of PTZ control of the user group is defined by numbers 1 10 with 1 for the highest priority Users with higher priority can obtain PTZ control from other users Control Digital Output allows users to control digital outputs such as alarms This option only works when setting IO devices as related devices in Alarm setting see page 41 View and Search Metadata transaction allows users with authorization to search
81. ma id GE CH these control the layout of the matrix grid Showing Video on a Matrix Showing video on a matrix requires that a matrix system be executed either on the same computer as the one running the NCS Client or another one For information on how to execute a matrix system see page 46 For the NCS Client to show video on a matrix it must be logged in to that matrix To login to a matrix Select the matrix you want to log in to and click the Login matrix button ay To load a matrix View Group View View Tour 1 After logging in go to the View Group List under Operate mode 2 To load a View Group right click on the icon and choose Load on Matrixes 3 To load a View or View Tour right click on the icon on a specific view and choose Show on Matrix Page 86 Central Management System Matrix View Alternatively drag View Groups Views and View Tours from the View Group list directly into the matrix list to load them To do this the NCS Client must be in Operate mode To configure a matrix grid layout 1 Ensure that the NCS Client is logged in to the matrix as described above 2 Select the matrix you want to configure 3 Click one of the Matrix grid buttons DIAE La E 6l EH The second button from the right Ei is the Matrix Grid NxN button Clicking the arrow next to this displays a menu from which you can select more display grid options The button on the far right Matrix Grid 16 9 is a ne
82. mmit after setup see page 27 Adding Editing Removing Matrixes To add a matrix 1 Ensure that the NCS Matrix system is running either on the same computer as the NCS Client or on another computer 2 Ensure that the client is in Edit Mode and the Configuration window is selected 3 Right click on the Matrix folder icon 1 Matrix then click Add Matrix r la mme weer Matrix Setting Matrix Setting Matrix Setting General osD Metadata General OSD Metadata General OSD Metadata Configuration jw Enable camera OSD jw Enable Metadata overlay Matrix Name Demo Matrix Foreground Foreground Font D Tahoma Font K Tahoma IP Address 192 168 1 68 Size g Size P E GA Color ly Color RI illaihi V Bold jw Edge V Bold lv Edge Background Background Rendering Option aii Color N Color i v Fix Matrix Grid Ratio iv Transparency f l Transparency Al d Info V Server Name Default jw Camera Name jw Camera Type jw Bitrate Default e To choose the rate at which camera images are updated on the matrix enter a camera tour interval 5 Under OSD in the Matrix Setting window e For text displayed on the matrix select a font a font size and font styles e Choose what information is included in on matrix text by checking Info Server Name Camera Name Camera Type and Bitrate boxes as required 6 Under Metadata in the Matrix Setting wi
83. n Service Reset NCS Configuration Server Status Running Options Options Alarm Image Path E Program Files CMSEventimages ue M SQL Reconnection M Run NCS Server when windows startup Zo aca Q Restoring NCS Configuration will not clear the setting of SQL Server NCS Server enables backing up alarm records at a local hard drive or to FTP servers Define a storage location for video backups under the Backup window You may select between two storage locations Choose Disk Storage for local hard drives or DAS or choose FTP to backup to FTP servers The License Status window displays current available licenses in the system NCS Alarm Server la DI Mcs Aarm Server la Main Configuration Backup License Status Main Configuration Backup License Status Backup Location License Status C Disk Storage License Status Trial 13 days remaining License Type Camera UO POS AC LPR S Total License 48 8 2 2 2 Ze FIP Server Port DU Default User Account Password Backup Directory i Upload Test File Page 21 Central Management System NCS System Overview By double clicking on the server icon from the Taskbar you can access NCS Server settings directly You can also check the version of your system or stop the service by right clicking on the icon and clicking About or Exit About HCS Alarm Server MCS Alarm Serve
84. ndow e Select enable or disable Metadata overlay e For Metadata information displayed on the matrix select a font a font size and font color You can also add a matrix from the Edit menu by pointing to New Object clicking on Matrix then following steps 4 7 above To edit a matrix 1 Right click on the icon for the matrix you want to edit Page 46 Central Management System Matrix System 2 Select Edit Matrix 3 Edit the settings as required 4 Click OK To remove a matrix 1 Right click on the icon for the matrix you want to remove 2 Select Delete Matrix and click yes at the confirmation prompt To configure the NCS Client for a multiple matrix system Follow steps 1 7 of the procedure described above entering the matrix name and port as appropriate for each matrix Configuration Contiguration Matrix Name Matrix 1 Matrix Name Matrix 2 IPAddress 192 168 1 51 IF Address 192 168 1 51 Port 5310 Port 5220 Test Matris You may sort matrixes on the configuration window according to name To do this right click on the Matrix O icon from Configuration under Edit mode and choose Sort by Name You may also drag and drop icons to rearrange order manually Page 4 Central Management System View Group Management View Group Management A View Group Matrix Profile stores the Matrix grids stream profiles and camera positions for one or more Matrixes For information on configuring Matrix g
85. nt to Central Management Client or Central Management Matrix and click NCS Matrix Matrix Instance Dialog Instance Name Default w i Stat X Cancel 4 Click on Option to open Matrix Instance Dialog Matrix Instance Option Dialog Instance Name Default Matrix Server Port 15210 Default Display Monitor 1 1280 x 800 D E oe Name Port Monitor w K X Cancel 5 Inthe Matrix Instance Option Dialog window select Default from list table 6 Enter a matrix name for example Monitor 7 in the Instance Name text box leave the port at the default setting of 5210 select the 1 monitor from drop down list and then click Update to update modification To configure the second and subsequent matrixes in a multiple matrix system 1 Inthe Matrix Instance Option Dialog window enter a matrix name for example monitor 2 in the Instance Name text box 2 Enter port number 5220 Page 19 Central Management System Getting Started with the NCS System 3 Select the 2 monitor from drop down list and then click Update to update modification Matrix Instance Option Dialog Instance Name Monitor 2 Matrix Server Port 15220 Default Display Monitor 2 1280 x 1024 D Monitor 1 Monitor 2 5220 ZY K X Cancel To configure a third and a fourth monitor repeat steps 1 3 naming the matrix instances as appropriate for exampl
86. nute of recording video before the last open alarm e Custom Time this sets the Start End time to define the period of recording video E Custom Remote Playback Start Time 2008 03 27 02 45 FF x gt End Time 2008 03 27 02 45 FF gt Time Zone NCS Client Source Server Z x x r e One Minute Before open one minute before e Ten Minutes Before open ten minutes before e One Hour Before open one hour before The Remote Playback Window has full playback controls 2011 5 18 F 07 40 04 i Y dy Ae eg 7 eames Playback Period oes E FF 07 39 27 FF 07 40 27 ii Export Period FF 07 39 27 FF 07 40 27 Click Snapshot button al The snapshot is displayed and users can save the image or copy it to the clipboard Click Export Video button to save recorded video e Set up the cue in and cue out points the cue in and cue out time will show on the information window e Click Export Video button choose the folder where you want to save the file at enter the file name and click SAVE e Set the Export Format as ASF or AVI ASF recommend and set the Use Profile e Select to export i e save the record video with Audio OSD and metadata display or export video only e Click OK to save the video If you want to fix the window size at the original resolution check Fix original video resolution al If the camera is equipped with Audio function the Audio button will
87. o Event Message Picture for Server System Abnormal Events including Disk Space Exhausted System Health Unusual and Source Server Disconnect Event Message Picture for Server System Operational Events including Start Modify Stop Smart Guard Schedule Live Streaming Server Remote Playback Server Start Stop Manual Record Modify Confiquration Enable Disable Channels Lock Unlock System Event Message Picture for Device Authority Deficiency The user does not have the authority to view the snapshot of that device DAENS To control the number and size of icons see page 65 Page 62 Central Management System Alarm Overview Window Real Time Tab es Click on tab to D EI Priority A yp 3 Description _Ovwne e j es H E e Gaas SLEG es EE Szene Soret 20 11 56 A Critical New Cisco PYC 300 General Motion Jean Cisco PYC 300 192 168 2188 General Motion admin 2010 11 30 11 Aer al arm S s H Critical New Cisco PVC 300 General Motion Jean Cisco PYC 300 192 168 2 183 General Motion admin 2010 11 30 11 56 12 tli Critical New Cisco PVC 300 General Motion Jean Cisco PVC 300 192 168 2188 General Motion admin 2010 11 30 11 56 01 Ht Critical New Cisco PYC 300 General Motion Jean Cisco PVC 300 192 168 2188 General Motion admin 2010 11 30 11 55 48 H Critical New Cisco PVC 300 General Motion Jean Cisco P C 300 192 168 2 188 General Motion admin 2010 11 30 11 55 38 The Real Time tab gives a list of alarm events as they come in to
88. o enable audio stream If the camera is associated to metadata devices the Metadata button EJ will appear Click the button to disable metadata display To use PTZ control in a live video window Click the PTZ button for the following PTZ controls Enable Digital PTZ Check to switch between digital physical PTZ Preset Point Choose if available from the drop down list Patrol or AutoPan Choose if available from the drop down list click to start and to stop Direction controls Up Down Left Right and Home Zoom out and zoom in controls Focus far and focus near controls Speed Dome Menu If supported this button enables the Setup Menu of Speed Dome cameras The menu will be displayed directly on the video channel Use the PTZ controls to navigate down the menu Other assigned keys with functions will be displayed on the screen for example the Focus button for Select PT Control Enable Digital PTZ Preset Point Display Setup Le a ke pepe TLT Diugnosties Zoom m m Focus m Ra Speed Dome Menu detup Henu Focus Iris Selec If the camera supports ImmerVision Lens and was correctly configured in Main Console an additional button e Switch to ImmerVision will appear above the PTZ Control panel Click on the arrow to select between Original Quad Mode PTZ Mode Parameter Mode Page 6 7 Central Management System Alarm Overview Window To view reco
89. omputer To use Send to Matrix and Show Related Camera on Matrix a matrix must be configured see page 46 and that matrix must be set to Allow Show Video on Event see page 86 Select options in the Auto Notify NCS Server area If you want the server to send an automatic email to users when an alarm event happens click the Email button and then select users If you want the server to send an automatic SMS message to users when an alarm event happens click the SMS button The text of the message is Alarm Name on Date Time To configure the servers GSM modem and email settings including email content see page 43 In the Source Device area select the device s which will trigger this alarm In the Event Message area select the event s which will trigger this alarm In the Related Device area select devices which you want to relate to this alarm For example an input device event can automatically trigger a live video popup from a related camera Click OK The alarm you added appears in the tree structure of the Configuration window You can also add an alarm from the Edit menu by pointing to New Object clicking on Alarm then following steps 3 11 above Page 42 Central Management System Alarms To copy an alarm i a 3 4 Right click on the icon 2 for the alarm you want to copy Select Insert Copy Configure the alarm as described above Click OK The alarm you added appears in the tree structur
90. or above Intel 945 or 965 chip for single monitor Mother board Intel P35 975 chip or nVidia nForce 650i chip for multiple monitors Ethemet 100 baseT or above Gigabit LAN recommended MS Windows XP Pro SP3 Vista 2003 Win 7 2008 R2 Central Management System system Requirements Scenario C Using four PCs with NCS Client and NCS Matrix on PC1 NCS Server on PC2 SQL Server on PC3 and NCS Matrix on PC4 NCS NCS NCS SQL NCS Client Matrix Server Server Matrix PCT PCZ PCs PCH Recommended hardware specification for Scenario C SSES CPU Intel Core 2 Quad Intel Core 2 Duo Intel Core 2 Duo Intel Core 2 Quad Q6660 2400MHz E4500 E4500 Q6660 2400MHz 250 GB or above 250 GB or above 250 GB or above 250 GB or above Display ATi X4350 or above ATi X1600 or above ATi X1600 or above ATi X4350 or above Intel 945 or 965 chip for single monitor Mother board Intel P35 975 chip or nVidia nForce 650i chip for multiple monitors 100 baseT or above Gigabit LAN recommended o MS Windows XP Pro SP3 Vista 2003 Win 7 2008 R2 Multiple Monitor Configuration For a PC running the NCS Client and NCS Matrix it is suggested that three monitors are used one to display the Map window and the System Configuration window one to display the Alarm Overview window and one to display the live video feed matrix This enables efficient use of the system and saves hardware costs PCs using multiple monitors in this way shou
91. ormation dialog box enter your name and company and then click Next Page 9 Central Management System Installation P Microsoft SQL Server 2005 Express Edition Setup X Feature Selection Select the program features you want installed Click an icon in the following list to change how a feature is installed Feature description Installs the SQL Server Database Ge Engine tools For managing relational Gel Connectivity Components and XML data and replication amp v Software Development Kit This feature requires 87 MB on your hard drive It has 3 of 3 subfeatures selected The subfeatures require 119 MB on your hard drive Installation path C Program Files Microsoft SQL Server Disk Cost BER emm 8 Inthe Feature Selection dialog box select Database Services and then click Next P Microsoft SOL Server 2005 Express Edition Setup X Authentication Mode The authentication mode specifies the security used when connecting to SQL Server Select the authentication mode to use for this installation O Windows Authentication Mode Mixed Mode Windows Authentication and SQL Server Authentication Specify the sa logon password below Enter password br Confirm password freee 9 Inthe Authentication Mode dialog box enable Mixed Mode option and then enter and confirm a password Microsoft SOL Server 2005 Express Edition Setup Configuration Options Configur
92. ou may sort users and user groups on the configuration window according to name To do this right click on User or User Group under Edit mode and choose Sort by Name You may also drag and drop icons to rearrange order manually Page 38 To add remove synchronize a Windows User Central Management System User Groups and Users 1 Right click on the User folder icon JI User then click Add Remove Sync Windows User The Select Group Select User window appears Select User Select Active Directory user s AeeseeseeseeeeeeeeeEEEEEEEeeeed MO HelpSernicesGroup GRAB Zen MO Replicator See PAMERER Pa et dn Aen Ek AE n nn n lt Select All Deselect All Group mapping Active Directory Domain 0x6p7g3eb9 MC Administrators Administrators TARZET SIRAI A OO Backup Operators Backup Operators RRERIA ID SKIS OO Guests Guest ikier 0 User HARES AA AT M SUPPORT_388945a0 CN Microsoft Corporatior OO Network Configuration Operators GEGEE PRR en MOG Power Users Power Users SRA XBE475 PARRA Ai OO Remote Desktop Users ESSA PRI RS HABE MSAD Group Central User Group 9HelpServicesGroup HelpServicesGroup O Power Users Power Users Replicator Replicator O Administrators Administrator ERC 2 Check users or folders under Select Active Directory user s and click OK to add Windows Users Click Select All to check all available users and folders or click Deselect All
93. ow select the alarm names for the alarms you want to display To filter by source server or source device 1 Click either the Source Server or the Source Device button Page 63 Central Management System Alarm Overview Window T Source Server and Source Device Filter x 3 VO SerrerGoup Camara 1 LamETS Z Lamera 3 Camera l input O Camera 1 Input 1 Camera 1 Irmut 2 Camera 1 Inout 3 Camere 1 Output 0 Camera 1 Output 1 Camara 1 Output 2 Camera 1 Output 3 eege KC Na MAMANA EK F OK x Cancel 2 Inthe Source Server and Source Device Filter window select the server s the camera s I O device s or metadata device s for the alarms you want to display To filter by alarm owner 1 Click the Owner button Select User NAME Description 5 admin Administrator User 5 User 2 Inthe Select User window select the owners for the alarms you want to display To filter by time Click the Time button From the list select the period 1 Hour 1 Day 1 Week or 1 Month for alarms you want m to display 1 Day 1 Month O The above filter options can also be accessed by going to the Tools menu pointing to Real Time Alarm Filter and clicking on the filter option you want Output Tab and Output 2 Tab The Output and Output 2 tabs show lists of alarm event query results see page 75 or alarm event search results from the Advance Alarm Search tool see page 84 The lists c
94. put and Output2 windows click Edit Fields 3 Inthe Edit Fields window you may customize on which fields to display in the Output and Output2 windows e Check Show Alarm History to include Alarm Note in available fields Click on to add new fields into display or click on 7 to remove them Clickon o to adjust order e Click on Default to reset to default settings Alarm Management Window and Batch Alarm Management For any alarm displayed in the Alarm Overview window an Alarm Management window can be opened This gives detailed information about the alarm Depending on the privileges assigned to users it can also include basic information options to view live or recorded video feeds to trigger digital output devices for example an audible alarm signal and to print alarm details You may also update or reset the state priority and owner of the alarm under this window To view alarm information in the Alarm Management window Right click on any alarm event in the Alarm Overview window and then click Alarm Management Page 65 Central Management System Alarm Overview Window Alarm Management Alarm Image T m fa i Contact History cal Digital Output Name Phone Contact Time Lemma D sen Abways A Donatello 0912545679 Aways d Rafael 0963852741 Always Mienaelan 0987412365 ANWays Contact History Alarm Nama Source Devce Event Type Al arm Date
95. r version 1 5 0 Copyright C 2004 10 NCS Client Window Introduction The default NCS Client window placement is as the following figure including three main windows four toolbars and six menus Etonu eg Menus Three Main Windows are System Control window This window includes the Server List Map List Configuration Matrix List and View Group List sub windows Administrators can configure the NCS system in this window when the system is in Edit Mode See Part 2 Administrator Functions Setting Up the NCS System Page 22 Central Management System NCS System Overview Server view we H E G ServerGroup 6 0 NUUG Ine 7 e ML Taiwan demoli F demot 1 Input 0 E demot 1 Input 1 gF demati Input 2 oo demati Input 3 a demol 1 Output 0 i demo rOutput 1 oP dematl Output 2 oP demati Output 3 oS dematl Input 0 gf demotzktinpt 0 E demo 2r Input 1 AP demati Output 0 d demo kOutput 1 Gi demat2 Output 0 j demo zk Output 1 Eg Config A Matrix Map view Map window This window shows all maps and device indicators For administrator setup see page 31 For day to day use user can view the video show device information query and manage alarms from the indicators please refer page 71 Alarm Overview window The default Alarm Overview window contains the Recent Real Time Output Output 2 and Message Log tabs which allow users to manage ala
96. rded video from the alarm source camera 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Click Recorded Video D The Remote Playback Window has full playback controls EI Remote Playback Window Test Server Streets Remote Playback Navigation 2011 5 18 F 07 40 04 ail HS elm E Playback Period FF 07 39 27 FF 07 40 27 Export Period FF 07 39 27 FF 07 40 27 3 Click Snapshot button al The snapshot is displayed and users can save the image or copy it to the clipboard 4 Click Export Video button to save recorded video e Set up the cue in and cue out points the cue in and cue out time will show on the information window e Click Export Video button choose the folder where you want to save the file at enter the file name and click SAVE e Set the Export Format as ASF or AVI ASF recommend and set the Use Profile e Select to export i e save the record video with Audio OSD and metadata display or export video only e Click OK to save the video 5 Ifyou want to fix the window size at the original resolution check Fix original video resolution al 6 Ifthe camera is equipped with Audio function the Audio button will appear Click to enable audio stream 7 Ifthe camera is associated to metadata devices the Metadata button E will appear Click the button to disable metadata display 8 Click on the Digital PTZ button to enable Digital PTZ Zoom in
97. rding Schedule Disable B Cameras Auto Recycle Enable eg CashRegistert Last Recycle Time Last Recycle Range Recording Days on Disk W Used Disk Spce 102 27GB P Free Disk Spce 125 54GB Total 228 2068 Hardware Health CPU Temperature NIA Fan Speed NIA Page 6 Central Management System Device Alarm Menus Camera Alarm Menu The Open Live Video Window Open Playback Window and Backup Recorded Video commands appear on the device alarm menu for cameras The first two options are the same as on the Alarm detail Window see pages 65 69 To open a live video window d 2 10 Right click on the indicator for the camera or on the camera s icon in the MapView display Click Open Live Video Window The Live Video Window for the camera is displayed EI Live Video Window Source Device Local Vivotek FD7141 FD7141 Source Address 192 168 1 77 Video Resolution 800 x 600 Bit Rate 288 kbps Frame Rate 2 fos Jaan maass If you want to adjust the video to original video resolution check Adjust to original video resolution al Click Snapshot button The snapshot is displayed and users can save the image or copy it to the clipboard Click on Alarm Management A to go to the alarm management window Click on Alarm Playback D to view alarm playback video if available Select Streaming profile button m to choose different video quality Options include Original Main Recorded High
98. re of Central Management system which is used to log in to the Alarm Server NCS Matrix Video Matrix to view live video controlled by NCS Client Page 5 Central Management System system Requirements System Requirements System Setup There are three scenarios for NCS system setup Depending on customers budget and the size of the project customers can choose a suitable scenario The system requirements for each scenario are detailed below Scenario A Using one PC for all installed elements NCS NCS NCS SQL Client Matrix Server Server PC1 Recommended hardware specification for Scenario A eS Intel Core 2 Quad Q9550 2830MHz BN Band Dk 250 GB or above Intel 945 or 965 chip for single monitor EES Intel P35 975 chip or nVidi chi 7 Display ATi X4350 or above nVIDIA GeForce 9500series or above Ethemet 100 baseT or above Gigabit LAN recommended Ooo 0S OSOS MS Windows XP Pro SP3 Vista 2003 Win 7 2008 R2 Scenario B Using three PCs with NCS Client and NCS Matrix on PC1 NCS Server and SQL Server on PC2 and NCS Matrix on PC3 NCS NCS NCS SOL NCS Client Matrix Server Server Matrix 22 PCI gt js PC gt PC3 Recommended hardware specification for Scenario B le e IL mo CPU Intel Core 2 Quad Q6660 Intel Core 2 Duo Intel Core 2 Quad Q6660 2400MHz E4500 2400MHz raw Tes Ssd S eS 250 GB or above 250 GB or above 250 GB or above Display ATi X4350 or above ATi X1600 or above ATi X4350
99. rids and camera positions see page 86 All users can load View Groups but only administrators can save and edit them For information on how to setup a Matrix please refer to page 86 Before proceeding to View Group Management please carefully differentiate the terms below View Tour A set of predefined Views grouped to display one after another Each View is independently configured and can include different Matrix grid layouts and different video channels Camera Tour A single View that contains more video channels than the chosen Matrix grid layout All channels will be displayed in carousel under the same Matrix grid layout Grid Tour A single video grid that contains more than one video channel The video channel will be displayed one after another in the grid Alarm Tour You may reserve specific grids in each view for alarm video display These grids are marked with a colored corner When incoming alarm videos exceed the number of reserved grids the rule for displaying alarm video Is called Alarm Tour You may choose from two modes Simple and Salvo View Groups can be managed under the View Group List under the System Control Window View Group List AS IT Fiew Group List Group A D I 3x3 Entrance gt 01 PM gt 02 NY E 02 Tour Tow de Taiwan 4x4 Exit B 2x2 Hall e View Tour Group A 3x3 Entrance Group A 4x4 Exit zc DI Group A 2x2 Hall E Group B E Group C E Serv Map Econ
100. rlying child map Click Searching for devices on the server list or on map Users can search for devices servers or map indicators on the server list or on maps by using the Search function To use the search function 1 On the Search toolbar click the Search icon Se Find what JPL Match case Match whole word only Find bere f NapTree e Serverlree Device mi W SererGroup W Server W Camera W IO W Metadata Find String In W Server lb W Server State i Server Address Ww Server City W Server ZIP Contact Name Contact Phone Contact Email 2 Inthe Search window enter the full name or part of the name of the indicator you want to search for 3 Select from the following options e Match case searches for names where the case matches the letters you entered Match whole word only searches for the term you entered as a whole word If the term you entered forms only part of an indicator s name that indicator will not be found e Device check to select which kinds of devices you want to include in the search Find Where MapTree ServerTree Click to define search range either from the MapTree or ServerTree e Fing String In Specify string location for more accurate results 4 Click Find Next to search for the indicator name If an indicator is found the map it is on will be displayed and the indicator will be highlighted The corresponding icon in the MapV
101. rms see page 62 eee i be we mn Kr one erc mee ereta Gren teed malire Six menus are The File menu This menu has functions use to commit to NCS Server save load NCS Client Configuration and Logout Exit NCS system The Edit menu It allows administrator add New Object to configuration sub window of System Control Window Import Indicator Image setup Server configuration refer Central Server Configuration Window section of page 43 on Edit mode and allows all user to setup Map Display setting of Map windows Alarm Log setting of alarm overview windows and setup Joystick to control Matrix e The View menu This menu has options to setup the appearance of NCS Client window The Tools menu This menu has five tools to help user easy to get information for Main Console manage alarms and view live and record videos The Zoom menu User can control and adjust map appearance see page 71 e The Help menu The menu provides the version information of NCS Client The toolbars are Page 23 Central Management System NCS System Overview The Standard toolbar The functions accessed by this toolbar are toggle Edit Mode Operate Mode see page 27 committing configuration changes to the server see page 27 importing exporting NCS Client software configuration see page 55 and displaying version information see page 93 The Map toolbar The functions accessed by this toolbar are u
102. ror Reporting Server Microsoft uses error reports to improve SQL Server Functionality and treats all information as confidential m en 11 In the Error and Usage Report Settings dialog box you do not need to select any option Click Next Page 10 P Microsoft SQL Server 2005 Express Edition Setup X Ready to Install Setup is ready to begin installation Central Management System Installation 4 L Setup has enough information to start copying the program files To proceed click Install To change any of your installation settings click Back To exit setup click Cancel The following components will be installed e SQL Server Database Services Database Services Replication The following components that you selected will not be changed e Client Components Setup Progress The selected components are being configured Product Status LML Q SQL Setup Support Files Li SQL Native Client Q SQL v55 writer O E Server Database Services Setup finished Setup finished Setup finished Setup finished Setup finished e Cancel 13 In the Setup Progress dialog box wait for installation finish and then click Next Setup has finished configuration of Microsoft SQL Server 2005 ball Microsoft SQL Server 2005 Setup X Completing Microsoft SQL Server 2005 Setup 4 L Summary Log To minimize the server surface area of SQL Server 2005 som
103. s alarm e Alarm Status Interface to Update or Reset alarm status of State Priority Owner and Alarm Note to note how users deal with the alarm To view live video from the alarm source camera 1 Right click on any alarm event in the Alarm Overview window then click Alarm Management 2 Click Live Video fe The Live Video Window for the camera is displayed Live Video Window Source Device Local Vivotek FD7141 FD7141 192 168 1 77 800 x 600 288 kbps Source Address video Resolution Bit Rate Frame Rate 2 fps alala elslsisz Page 66 10 Central Management System Alarm Overview Window If you want to adjust the video to original video resolution check Adjust to original video resolution al Click Snapshot button The snapshot is displayed and users can save the image or copy it to the clipboard Click on Alarm Management A to go to the alarm management window Click on Alarm Playback D to view alarm playback video if available Select Streaming profile button to choose different video quality Options include Original Main Recorded High Normal Low and Minimum i For cameras with two way audio support you may click and hold the Talk button for this function Talking will end when you release the button Please note alarm live view pop ups will be temporarily disabled when using the Talk function If the camera is equipped with Audio function the Audio button will appear Click t
104. sed to adjust map appearance see page 71 The Operate toolbar The functions accessed by this toolbar help users in day to day use of the NCS Client For more information see page 61 The Status toolbar Quick links to SQL Server Status and Central Backup Status can be found here The Search toolbar The functions accessed by this toolbar include functions involved in searching see page 72 i PAE Mode E 57 ld ei Standard Map Operate Status Search Page 24 Central Management System NCS System Overview NCS Client Setting You are able to configure functions including auto startup auto login auto reconnection instant playback and client recording under this window Go to the Edit menu NCS Client Setting NCS Client Setting Startup Record Setting M Enable Auto Startup M Recording on the Client jw Enable Auto Login Path User Account PO CaProgram FilesiClient Recordings ur Password PO Pre Record Time 5 Sec Max 60 Password Confirm PO Post Record Time 15 Sec Max 120 jw Auto Recycle Reconnection Keep Recording 180 day s jw Enable Auto Reconnectto NCS Server Auto recycle recording data when jw Enable Auto Reconnectto NCS Matrix storage is less than E Instant Playback Setting Miscellaneous Pre Playback 5 Sec Max 60 lv Show central ID on server list and matrix list Post Playback 15 Sec Max 120 ECKER Startup Check to enable auto startup or auto login
105. set application looks Office 2000 Office XP Office 2003 Visual Studio NET 2005 Windows XP Office 2007 System Operate Mode Edit Mode Q To carry out most administrator functions you need to be in Edit Mode Press the Edit Mode toggle button Edit Mode to enter Edit Mode and press it again to exit Edit Mode When in Edit Mode the NCS Client will not receive alarms A flashing indicator v reminds you that you are in Edit Mode Any changes made to the system must be saved with the Commit E Commit button When administrators bg click the Commit button to save changes other users will be disconnected from the NCS server and will need to log in again NCS Matrix Window Introduction Move Mouse to right down area the please see page 52 icon would auto appear User can edit exit the Matrix further option SQL Server Introduction NCS system is use SQL Server 2005 Express of Microsoft free application software as database recommend user to use Microsoft SQL Server Management Studio Express to backup SQL Server Please refer the web site of Microsoft http technet microsoft com en us library ms365247 aspx Page 27 Part 2 Administrator Functions Setting Up the NCS System This section describes functions and operations of the administrator to set up the NCS Client software system while in Edit Mode Please follow this section to setup Servers Devices Maps Servers Devices on Map User Groups and Users Co
106. t must be logged in to a matrix in order for most of the Matrix Toolbar commands to be used e Remove camera on matrix 9 when a camera icon on a matrix e is selected clicking this button removes it e Reset matrix this button removes all cameras from the selected matrix e Toggle allow show video on event When selected you can define matrix grids to display video from cameras when alarms are triggered Only available under Edit mode e Toggle tour l Enable Camera tour when focused on Views View Tours when focused on View Tours and Grid Tour when focused on grids Only available under Operate mode e Open PTZ Control Panel dn this opens a window for PTZ controls When using a camera with ImmerVision support another button Switch to ImmerVision will appear under the PTZ Control panel Click to switch between Original Quad Mode PTZ Mode Parameter Mode Only available under Operate mode n amp e Go to previous view next view Switch between Camera Tour views when focused on Views between views when focused on View Tours or between cameras when focused on Grid Tours Only available under Operate mode e Save View Group eh this saves the current matrix view group into the View Group List Only available under Edit mode e The Audio button this enables camera audio A e The Talk button 2 this enables two way audio or talking directly to the chosen camera e The Matrix grid buttons o
107. that the Configuration window is selected 2 Right click on the User Group folder icon UserGroup then click Add User Group fa User Group Configuration Group Name HelpServicesGroup Group Description Function Privilege Device Access Iw Alarm Management A Focus Lost 2 QA Room lv View Alarm Image A Link Iw Open Live Video 2 w OO Vivotek IP7161 Room 101 1 V Open Backup Recorded Video O Vivotek FD7141 Room 102 OO JPN Room 104 2 v PTZ Control Os JPN Room 104 3 5 D M2 YO Room 105 3 Ae MM NY Alarm 201 jw Control Digital Output D 7 Streets Alarm 204 View and Search Metadata transaction MM Streets Alarm 205 gt Cp Test Pos Iw Remote Desktop Dida TestPos ls Demo V Operate Device Order m a ee PE V Central Backup Sq TestPos Iw view System Log D Test LPR rm I Allow Using Talk gt a 3 Inthe User Group Configuration window enter a group name and a group description if required 4 In the Function Privilege area select the privileges for members of this User Group Alarm Management allows users to change alarm status on the Alarm Management window see page 62 Alarm Management a Alarm Information Alarm Name Source Device Event Type Date Time Alarm Image Source Server Information Server Name Date Time Address EI ke E E City State Zip Other Information Contact History Name Phone Contact Time Alarm Guide e alar
108. the client For client configurations where a lot of devices are being monitored a great many alarm events may be received To display only relevant events the user can filter by Priority State Alarm Name Event Type Source Server Source Device Owner and Time In addition the number of displayed alarm events can be controlled see page 65 To filter by priority Click the Priority button From the list select the priorities for alarms you want to display Sa 5 SE E normal fv tnerooress To filter by state BW Ee Click the State button From the list select the states for alarms you want to display S Ji To filter by alarm name 1 Click the Alarm Name button CF Alarm Name Filter E SelectAll Clear All Alarm Name General Motion Signal Lost Z ox cee 2 Inthe Alarm Name Filter window select the alarm names for the alarms you want to display To filter by event type 1 Click the Event Type button E mme CY Event Type Filter F SelectAll Clear All Event Type 2 General Motion Foreign Object Missing Object Focus Loss Camera Occlusion Camera Signal Lost Disk Space Exhausted System Health Unusual Digital Input Triggered Enable Channel Disable Channel Start Smart Guard Stop Smart Guard Modify Smart Guard APKSPRS PKS PKS ESTES PSPSPS RS EST ESTES ITUUUUUUUUUUUUUU Esseg 2 Inthe Event Type Filter wind
109. to skip applying solution to NCS Client user account settings For example if you uncheck an Add to Central System solution the new account will not be added to NCS Client s user account list Instead of manually adding and updating Windows users you may also configure the system to automatically synchronize all Windows users at a specific period To configure automatic synchronization on Windows Users 1 St oS St Ze Right click on the User folder icon 1 User then click Auto Sync Windows User Setting The Automatically Synchronized Setting window appears Check Automatically synchronize Windows users Configure synchronized period to start every _ days Define synchronized time to decide what time the synchronization should start Click OK Automatically Synchromzed Setting Automatically synchronized setting Ww Automatically synchronize Windows users Synchronized period Dayts Synchronized tine 10 00 Auto synchronization will apply all default solutions to conflicts Page 40 Alarms Central Management System Alarms The alarm functions of the NCS Client can be configured to monitor many different events triggered by cameras input devices output devices and servers O To carry out the functions described below you need to be in Edit Mode and Commit after setup see page 27 Adding Copying Editing Removing Alarms To add an alarm 1 Ensure that the client is in Edit Mod
110. tware and commit it to the server as follows 1 Open NCS Client Software and log in with the admin account 2 In Edit Mode select the Configuration Window 3 Right click on the user icon admin for the admin account and select Edit User 4 Enter anew password and then click OK 5 Click on the Commit button commit to commit the modification to the server Matrix Management To edit the Allow Hosts list 1 Inthe Start menu point to All Programs point to Central Management Client and then select NCS Matrix to start the matrix 2 Point to the bottom right corner of the screen and then click on the General Setting icon ea 3 Click OK to open the Matrix Configuration window Page 52 Central Management System Network Management 4 Click the Allow List button Allow Hosts List M Allow All Hosts 192 168 1 51 Add Delete 192 168 1 50 w i OK X Cancel 5 Inthe Allow Hosts List window deselect Allow All Hosts and then choose from the following actions e To add a host enter the host IP address and then click Add e To remove an IP address from the allow list choose the IP from the table and then click Delete 6 Click OK to save the configuration To set a matrix password 1 Inthe Start menu point to All Programs point to Central Management Client and then select NCS Matrix to start the matrix 2 Point to the bottom right corner of the screen click on the
111. u want to remove e To clear all selected periods click the Clear All button 6 Click OK The coverage you added appears in the tree structure of the Configuration window O You can also add a coverage from the Edit menu by pointing to New Object clicking on Coverage then following steps 3 6 above To edit a coverage 1 Right click on the coverage icon CD for the coverage you want to edit 2 Select Edit Coverage 3 Edit the settings as required 4 Click OK To remove a coverage 1 Right click on the coverage icon t for the coverage you want to remove 2 Select Delete Coverage and click Yes at the confirmation prompt Page 35 Central Management System User Groups and Users User Groups and Users System administrators can control who can use the NCS client when they use it their ability to perform various functions and which devices they can access Privileges are assigned via user groups For each user group an administrator can define permitted functions as well as which devices the users in that group can access Password control permitted access times see page 35 and a matrix profile see page 47 are configured in the settings for each user Q page 27 Adding Editing Removing User Groups To add a user group To carry out the functions described below you need to be in Edit Mode and Commit after setup see 1 Ensure that the client is in Edit Mode and
112. ue out points the cue in and cue out time will show on the information window e Click Export Video button choose the folder where you want to save the file at enter the file name and click SAVE Page 8 Central Management System Device Alarm Menus e Set the Export Format as ASF or AVI ASF recommend and set the Use Profile e Select to export i e save the record video with Audio OSD and metadata display or export video only e Click OK to save the video If you want to fix the window size at the original resolution check Fix original video resolution al If the camera is equipped with Audio function the Audio button will appear Click to enable audio stream If the camera is associated to metadata devices the Metadata button CJ will appear Click the button to disable metadata display Click on the Digital PTZ button to enable Digital PTZ Zoom in and out with your mouse wheel and drag to Pan Tilt If the camera supports ImmerVision Lens and was correctly configured in Main Console the Switch to ImmerVision button will appear Click on the arrow to select between Original Quad Mode PTZ Mode Parameter Mode To Backup recorded video 1 2 2 2 hU6 Right click on the indicator for the camera or on the camera s icon in the MapView display Click Backup recorded video In the Remote Backup Recorded Video window choose a directory for the backup by pressing the URL button and browsing to the
113. urce device select Go to Map Layer User can click ons icon to stop this function when day to day use For a camera alarm event if you want a live video window from that camera to pop up select Popup Live Video Window Up to three live video windows can be open at a time User can click on T icon to stop this function when day to day use If you do not want to send the video of an alarm source camera and a related camera to matrixes check Disable to Matrix button a If you do not want alarm events to replace old events on the Matrix if the Matrix is full and users do not close old events check the Disable Matrix Popup button SS NCS system will auto filter the same alarm of one camera it can t allow one alarm of a camera to use more than one popup live video windows If you want a sound to play when the alarm is triggered check the Play Sound box then click the URL button and browse to a sound file For a camera alarm event if you want the camera s video feed automatically sent to a matrix choose a matrix from the Send to Matrix drop down list and a Group If a related camera is selected you can also choose to Show Related Camera to Matrix by checking that box The options of this section Go to Map Layer Popup Live Video Window Play Sound Send to Matrix and Show Related Camera on Matrix settings apply only to one computer If users run the NCS Client on another computer they will have to configure the settings for that c
114. ution for large scale projects CMS system Gil PC WW Col 5 d i ae Bag 64 ch d D DN IP analog IP cameras ed get INVA Cameras Hybrid System R eh ze 64ch 64ch IP cameras Analog cameras system Client Server Architecture The NCS System uses client server architecture to manage unlimited recording systems These send events to the NCS Alarm Server After filtering the events the NCS Alarm server sends alarm logs of pre determined events to a SQL Server SQL database and NCS Client systems The NCS Client system allows users in different locations to log in to the NCS Alarm server and if they have the authority to change the system configuration The NCS Matrix system can be viewed as an extension of the NCS client used to populate the alarms to additional monitors NCS Matrix system is controlled by NCS Client users Alarm Server SQL Server NCS Matrix NCS Client Definition of Terms Terms Descriptions NCS System All components of Central Management system Recording Front end servers of the Central Management system consisting of Video Recording systems Server which send events to NCS Alarm Server SQL Server Database of Central Management system which backs up alarm logs NCS Alarm Alarm Server of Central Management system which filters events in order to send out alarms Server and saves configuration of NCS system Abbreviate NCS Server or Alarm Server NCS Client Client end softwa
115. val OK 3 All licensed cameras will be under Available Cameras Select the cameras you want to add to the Grid Tour and press Cam Press to remove selected cameras Use the buttons and to adjust sequence of cameras 4 5 6 Sr O To add a new View Tour Set Grid Tour Interval Click OK to save settings After defining a Grid Tour you will be able to include it in the View It will be displayed with other cameras under the Selected Cameras List Right click on any camera to choose a suitable stream profile 1 Right click on iew Group List and select Add View Tour You will see the View Tour Configuration window View Tour Name Available Views S Grou 9 Grou H View Tour Configuration View 0 View 0 Selected Views FS Group A 3x3 Entrance S Group A 4x4 Exit Al Group A 2x2 Hall Add Tour interval Alarm View 2 Inserta name for the View Tour in View Tour Name 3 All Views will be under Available Views Select the Views you want to add to the View Tour and press Lg Add Press to remove selected Views 4 Use the buttons and to adjust sequence of Views Page 50 Central Management System View Group Management 5 Set Carousel Interval 6 Select an Alarm View When alarms are triggered and alarm related video is ready to be displayed on reserved grids View Tour will stop on the selected Alarm View to display the
116. ver settings 1 Right click on a server icon zs then click Settings 2 Enter the required settings then click OK To remove a server 1 Right click on a server icon 2 Select Delete and click Yes at the confirmation prompt You may sort servers under server groups or devices under servers according to name or type To do this right click on any server group or server under Edit mode and choose Sort by Name or Type You may also drag and drop icons to rearrange order manually Page 30 Central Management System Maps Maps The Map window displays indicator icons representing the devices and servers that the NCS client monitors They are shown against map backgrounds This enables quick and easy control and monitoring of devices according to their location Multiple maps of different locations and at different scales can be used as described below To change the size pan settings and brightness of map graphics see page 71 To carry out the functions described below you need to be in Edit Mode and Commit after setup see page 27 Map Hierarchy Maps can be layered in a hierarchical structure Typically the top level parent map is at a large enough scale to cover the geographical areas of all the lower level child maps Each child map is assigned an icon on the parent map Clicking a child map icon shows the child map in the Map window Multiple levels of child maps can be defined E Aa Taiwan
117. verage Alarms and Matrix system Central Management System Sservers Devices Servers Devices The NCS Client provides the ability to monitor unlimited cameras and input output devices through unlimited Main Console servers For convenience Main Console servers and their related devices are organized into groups The default top level group is called ServerGroup Child groups can be added to this in a hierarchical structure To carry out the functions described below you need to be in Edit mode and Commit after setup see page 27 The license of the software should be registered first before operating the formal version of NCS System Execute the License Management Tool in Help gt License Manager to activate the license from a dongle or serial number allocated with the NCS software package or de activate the license then use it on another PC to activate it again Please refer to page 56 for details on how to configure the License Management Tool 9 Adding Editing Removing Server Groups To add a server group 1 Ensure that the client is in Edit Mode and that the ServerView tab is selected 2 Right click on the ServerGroup icon at the top of the window then click Add Group 3 Enter the group name then click OK 4 The group you added appears in the tree structure of the ServerView window To edit a server group name 1 Right click on the server group icon for the group you want to edit 2 Select Settings 3 Enter
118. w set of grids dedicated to wide screen displays Double click on any channel under multiple channel view to switch to a dedicated single channel view Double click again to switch back To add cameras Grid Tours to a matrix 1 Ensure that the NCS Client is logged in to the matrix as described above 2 Select the matrix you want to configure 3 Drag cameras or Grid Tours directly from the Server List View Group List or Map to the desired matrix grid 4 The camera icons appear on the matrix You can drag them to different positions on the matrix To see which camera a particular icon represents point to the icon A text bubble appears showing the camera name type and server 5 Select Stream Profile of the camera Choose As NCS Client Original Main Recorded High Normal Low or Minimum C You can disable the Link between the Map and Matrix by clicking the Disable Link between Map and Matrix button So You can disable send video on event to Matrix by clicking the Disable to Matrix button BS O Video of new alarm events cannot replace old events on the Matrix if the Matrix is full and users do not close old events when you click the Disable Matrix Popup button T To remove a camera from a matrix 1 Ensure that the NCS Client is logged in to the matrix as described above 2 Select the matrix you want to configure 3 Select the camera icon and click the Remove camera on matrix button The setting of Matrix
119. ys The NCS system will remove all closed alarms three days old by 12 00 PM every day The default period of Keep All Other Alarms is 180 days The NCS system will remove all closed alarms thirty days old by 12 00 PM every day The default limit for Auto Recycle is 5 The NCS system will start recycling the oldest images when there is less than 5 storage space left To setup scheduled alarm backup 1 2 In the Scheduled Central Backup area of the Central Server Configuration window check Enable Define Start Time and Recurrence of schedule backup Page 43 Central Management System Alarms This backup refers to alarm records and does not include video For video backup please refer to page 79 For manual alarm backup 1 Goto Central Backup under Tools 2 Choose Full Schedule Backup or Partial Schedule Backup 3 Check Backup Alarm Image if you would like the snapshots saved as well Central Backup Manual Backup f Full Schedule Backup f Partial Schedule Backup Start Time 90101109 07 15 FFT t End Time 90101109 0715 FF 2 wW Backup Alarm Image 4 Click Start Backup to start kV This backup refers to alarm records and does not include video For video backup please refer to page 79 Central Server Configuration Alarm Hotline E Mail GSM Modem SMTP Server PO Port None PRO D Secure connection SSL Baud Rate i200 E Mail Sender po RIN Code Po E Mail Subject

Download Pdf Manuals

image

Related Search

Related Contents

ナチュラルストリームガーデン  取扱説明書（PDF）はこちら  エンベデットコンピュータ AR8300 モデル300F（PD  Monitor Audio Silver 1    Backpack 2.5 User Manual  Daewoo Electronics DSL-15D1T User's Manual  Bedienungsanleitung Mode d`emploi Istruzioni d`uso - Migros    Manual - AlekoProducts  

Copyright © All rights reserved.
Failed to retrieve file