Home

MVR-D2200V User Manual

1. Sequentially converts items in the file list If the conversion ends normally the OK icon will appear If the conversion fails the icon will say NG Right click on an item Converts only the selected file Double click on an item Displays the selected item in the main window If a change is made in the start frame or the end frame in the main window they must be re registered using the Add button Info system menu click on 9 in the DV MPEG file converter window shown on p 64 of this manual slo Vins Tip Drag and drop from Internet Explorer can be used to add multiple files into the list Drag and drop file 2 onto the main window automatically starts up the File List DV MIPEG File Converter DV MPEG File Converter m U lt 4 U m T 0 Q J A J ct P 7 9 5 Specify MPEG file formats created in converted files MPEG1 System Stream Multiplexes audio and video and records them in one file MPEG1 Elementary Stream Encodes audio and video and records each simultaneously as separate files Specifying either Video or Audio allows independent encoding of video and audio If the box Wave Format is checked video is encoded and audio as non compressed PCM data is recorded simultaneously in separate files MPEG2 Program Stream Multiplexes audio and video and records them in one file MPEG2 Elementary Stream Encodes
2. eGeneral tab Displays the file format or the saved drive folder name play back time and file size eVideo tab Displays the format of the video track If the selected file con tains only audio data this tab will not appear e Audio tab Displays the audio track format If the selected file contains only video data this tab will not appear Adjusting the overlay display size Click on the overlay size setup button That displays the assignable overlay display sizes that allow any size desired to be played back Adjusting volume Adjust the playback volume using the volume adjustment fader Right clicking on the volume adjustment fader will display the Adjust both L R sound level menu If a check is placed in the box the audio volume on the left and right channels can be adjusted simultaneously To adjust the left and right volume separately right click on the fader again and remove the check from the box in Adjust both L R sound level If you are using a mouse equipped with wheel functions move the wheel on top of the fader and adjust volume Volume for WAVE files cannot be adjusted on the MPEG Station Adjust with the Windows mixer uOmnmea8 SadvwN 4 MPEG Station File search In the program playback mode you can search for the file to play by the seach buttons or the keypad Search using search button canopus MPEG Station v Stop 99 99 Blayback Files H Playback Time pe e KEU 0 00
3. m 44 4l Options Convert Close anopus DV Format 720 x 480 PCM 16bit STEREO 48000 Hz DV MIPEG File Converter DV MPEG File Converter m 3 To assign options at the time of conversion click on Options After specifying the option click on OK Option Fiter CODEC Fiter CODEC Vertical Filter MPEG2 ption StormEncoder MVA D2000 Power S 75 Matrix Filter Kind Default 7 Preview Stat Frame End Frame Filter tab Vertical Filter This filter suppresses flicker in images with little movements If the value set is 100 its state is the same as that of the progressive display To use the vertical filter place a check on it Placing a check on vertical filter activates Power to specify its level Power Use the slider to adjust the level of filtration Matrix Filter This filter suppresses blur in images that have sharp and sud den movements To use the matrix filter place a check on it Once matrix filter is checked Kind is activated allowing you to select the pre set settings from the pulldown menu Kind Click on the button to select and assign preset from the pulldown menu Preview Start Frame End Frame U lt 4 U m T 0 Q J A J ct J Previews the assigned filter Click either the Start Frame or the End Frame the BitmapView window appears Check the filter effect the still picture th
4. NIPEG Station MPEG Station SS Playback Standard playback canopus MPEG Station Je LES Sto Gg gC Playback Fies t i di P 23 0 00 0 00 O ONG c aaam v aMn x4 LEX OME Start the MPEG Station click on the playback mode selector button and then do the following 1 Click on the file selector button to select the file to be played back 2 Click on the option button assign the playback parameters and adjust the quality of picture in the overlay display See Assigning playback options on p 55 3 Click on the playback button The file plays and the playback images are output to both the personal computer display and the video output terminal f only outputting video click on the overlay display button to end the overlay display 4 To stop click the stop button Clicking on the stop button returns the playback position to the head of the file Click the pause button to pause uomnea3G8 DAdWN Playback Sound MPEG WAVE file playback requires a sound card that can run on the OS on which the MVR D2200V operates Because playback sound outputs from the line output terminal on the sound card connect the line output terminal on the card to a speaker equipped with an ampli fier or to a stereo amplifier g a MPEG Station Program playback Start up the MPEG Station click on the playback mode selector but ton and follow the steps below canopus MPEG
5. Before Installation SS UJ v h a J t J 0 ct D n ct 0 J License Agreement This Product includes a Canopus Software License Agreement which is a legal agreement between you and Canopus Co Ltd for the Canopus software product s included in this package By installing copying or otherwise using the software all within the limitations set in the agreement you agree to be bound by the terms of this license agreement If you do not agree to the terms of this license agreement DO NOT install or use the software Package Contents The below items are included in this package Please check if all items are included and if not please contact Customer support MYR D2200VY product contents MVR D2200V board S Video composite conversion cable CD ROM Manual User Registration Card Customer Support For questions regarding application setup and usage please contact your local Canopus office distributor or the store that you have pur chased this product For questions regarding the SDK please contact the SDK support address printed in the SDK manual Precautions It is illegal for anyone to violate any of the rights provided by the copyright laws to the owner of copyright except for fair use mainly private noncommercial use Also in certain cases copying is prohibited with no exceptions In no event shall Canopus be liable for any direct or indirect damages whatsoever arising out of
6. Default Return to the factory default settings Restore Restore the previous sittings Capture parameter settings MPEGS Video CD MPEG Tab e Mode Select your file type VideoCD will create a MPEG file in VideoCD compliant format eStream type Select the stream mode MPEG Station REDI iS Tip You can click on top of the fader controls to show a checkbox to control both faders at the same time sy 7 Tip You can also use your mouse wheel to control the faders MPEG Station MPEG Station NN Video tab S U I 0 f ct 0 ct 0 5 Capture parameter settings MPEG Video Audio Profile and Level c BSH C MPGLL C SP ML r Standard Video bit rate NTSC PAL eProfile and level Assign profile and level Specifiable only when MPEG2 is se lected for the file format eStandard Assign the video signal format elmage size Assign the size of images in capture files If MPEG1 or Video CD is selected for the file format then 352 x 240 is the only size that can be selected e Aspect ratio Assign the aspect ratio eVideo bit rate Assign the video data bit rate and coding format Assign video bit rate in 400bps units If bit rate is not set in 400bps units conversion to bit rates in 400bps unit will be done automati cally Increasing bit rate improves picture quality but also in creases file size Set the video data coding
7. 3 Set the Power Management settings System Setup System Setup System Setup oO MP MVR D2200V _ MVR D2200V Chapter 3 MPEG Station This chapter explains about MPEG Station About MPEG Station Capturing Video Playback Details on Encoding Parameters MPEG Station SS About MPEG Station uomnea3G8 DAdWN g How to launch MPEG Station From the Start Menu go to AIl Programs Programs for Win dows 2000 MVR D2000 and select MPEG Station Program Interface Capture Mode f cr us MPEG Station O Gs yo am Capture Mode Ra p Kog Composite O7 EM Capture Frame capture m2p O gt The following dialog box will appear when you right click on the interface 22 Combine 3 Web information About MPEG Station 1 Close Closes MPEG Station 2 Homepage Click here to jump to the Canopus Homepage 3 Version info Click here to display the version info 4 Icon Click here to minimize this application 5 Capture mode Click here to switch to Capture mode 6 Playback mode Click here to switch to Playback mode 7 Overlay button When the preview button is pressed the overlay will turn on off toggle MPEG Station 13 14 15 16 17 18 19 20 21 22
8. Sampling rate 48000 He Audiobitrate EINEN Kors Audio format Layer z o xo ui Emphasis NONE gt T Protection T Original Copyright ode TR cmn The display window will differ according to the file format for conversion If Video CD format is selected If the Video CD format is selected assign these audio settings in step 5 on p 70 U lt 4 U m T 0 Q J A J ct 72 Sampling rate The audio signal s sampling rate is displayed 72 Jg Audio bit rate Specifies the audio data bit rate The higher the bit rate the better the audio quality but the higher the bit rate the greater the size of the file Audio format Specifies the audio data format Formats other than Layer 2 cannot be selected Channel Specifies the type of audio channel Emphasis Set for emphasis encoding Protection Check this option to create a file for CRc erroe detection Original Check this option to create a file that has an original bit attached Copyright Check this option to create a file that has copyrighted data attached After completing the settings click on Next DV MPEG File Converter DV MPEG File Converter DV MPEG File Converter m 8 Specify the data output settings U lt 4 U m T 0 Q J A J ct P 74 x 0 Info Only output folders can be specified during multiple file conversion File name
9. 23 24 Video output When the preview button is pressed this will pass through the input video to the output connector Click again to turn off the output Information display Displays the file information 10 11 12 Status bar Displays captured length Capture Click here to start capture Preview Click here to turn the preview on off toggle Still capture Click here to capture a still image from the current video Video input Click here to select between S and composite video input Capture file Click here to set the capture file Option settings Click here to set the capture video parameter still capture options Image size Click here to set the preview image size Image quality Click here to set the capture and overlay quality Capture time Click here to set the capture time Monitor level fader Click here to adjust the input audio level for monitoring You can use the wheel on your mouse to adjust this level also You can not adjust this audio level while capturing Mute Click here to mute the monitor audio This setting is not valid when capturing Interface mode Click here to attach or separate the overlay display area from the main control area Homepage Cl
10. EEFI e e Q HOR CON gt 1 Brightness Adjust the brightness of the input pic ture Zero 0 is the darkest state and 99 is the brightest state The higher the value the higher the luminosity the lower the value the lower the luminos ity 2 Contrast Adjust the input picture s contrast A value higher than 50 raises the contrast and a value lower than 50 increase the contrast in a state in which the luminos ity component of the input signal is in verted When the value is 50 there is no luminosity component to determined contrast 3 Hue Adjust the color hue of the input picture The higher the value goes above 50 the more the color goes from red to bluish red and the more the value goes below 50 the more the color goes from green to bluish green If the value is at 50 then the sate is such that the color compo nent of the input signal cannot be ad justed uomnea3G8 DAdWN 4 Saturat ion Adjust the density of color in the input picture The higher the value the greater the density of the color When the color is 0 there is no color component black and white state Restore the default settings After reflecting the results of adjustment and recording the adjusted values re turns to the capture mode window Returns to the capture mode window without applying changes MPEG Station
11. istrator privilege 1 When you start Windows after inserting the board Plug and Play will detect the hardware and a driver installation window will open Choose Install from a list or specific location Advanced and click Next Found New Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps you install software for Multimedia Controller If your hardware came with an installation CD or floppy disk insert it now What do you want the wizard to do O Install the software automatically Recommended Qin 3 ist or speci anced Click Next to continue Back Next gt 2 Click Don t search I will choose the driver to install and click Next Found New Hardware Wizard Please choose your search and installation options O Search for the best driver in these locations Use the check boxes below to limit or expand the default search which includes local paths and removable media The best driver found will be installed the driver you choose will be the best match for your hardware lt Back J mee Cancel 3 Select Sound video and game controllers from the Common hardware types field and then click Mext Found New Hardware Wizard Hardware Type Select a hardware type and then click Next llers Se Storage volume shadow copies SS Storage volumes F System devices B Tape drives S Universal Serial Bus controllers Windo
12. When checked If MPEG data is 4 3 the entire window will become video output without the encoder switching to video output If MPEG data is 16 9 part of the screen 540 dot section in the horizontal direction will be cut off and the screen will be full in the horizontal direction Information on the cut off sections positions may be entered into the header in the MPEG stream and if it is the sections specified will be cut off Otherwise the central sections of encoded streams are always cut off Appendix Pan amp Scan display Specify this setting when video output is connected to a 4 3 size TV If the playback data aspect ratio is 16 9 a horizontal part of the screen will not be displayed but no matter what the aspect ratio is the display will be at a correct aspect ratio Use the timestamp PTS DTS inside the bit stream Not available in MVR D2200V The time in which the respective audio and video data should play is entered as a time stamp in multiplexed video and audio MPEG data system stream in MPEG1 and program stream in MPEG2 That controls video and audio play time and provides a resulting synchronization of audio and video Normally this is operated with the box checked gt e Q J X MPEG1 and MPEG2 streams The MVR D2200V has functions for encoding both video and audio signals For video signal encoding either MPEG1 ISO IEC 11172 2 or MPEG2 ISO IEC 13818 2 specificat
13. reason for not doing so use the MP ML with MPEG2 Profile and level have no specifications for MPEG1 so they cannot be selected Standard NTSC is the video standard used for television in Japan North America and a number of other countries PAL is the video standard used in many European countries China and other areas Select NTSC for use in North America Appendix Video tab Profile and Level Appendix Appendix Image size This is the number of pixels that make up one frame when video is encoded The larger the image size the better the resolution but data volume increases enormously Generally the image size to be used is 720 x 480 for PAL it would be 720 x 576 If there is a special need to decrease data size at or less than 4MB per second use a resolution of 352 x 480 352 x 576 for PAL This pixel size is generally called Half D1 If you want to decrease data volume further to around 2MB per second use the 352 x 240 resolution 352 x 288 for PAL This pixel size is generally called SIF If MPEG1 is selected no sizes other than these can be selected gt e Q J X 886 Appendix Aspect ratio 16 9 and 4 3 9 Ld The aspect ratios of video images now used are 4 3 or 16 9 Click on the radio button to assign either aspect ratio When shown on TV a 16 9 ratio video indicates the video sig nal as shown below A picture has been t
14. 0 00 0 00 0 00 om seme amem D 1 Search for the next file 2 Search for the previous file Search using the keypad Playback MPEG Station 1 E 2 39 3 32 maam aMMa DME 1 Specify the number of the file to play numbers are shown in the program list MPEG Station SS Repeat playback Ez canopus MPEG Station Stop 99 9 Blaybacke p P 99 22 z at ae MET 0 00 0 00 0 00 0 00 gt mamm MEOS SE To T0 e a Repeat playback can be enabled in standard playback and program playback modes 1 Click on the repeat button for repeat playback All files registered in the play list can be repeated played in program playback mode To clear repeat play click on the repeat button one more time uomnea3G8 DAdWN g MPEG Station Details on Encoding Parameters Overview When encoding with an MPEG Station of MVR D2200V use the de tailed encoding parameter assignment file that allows you to assign detailed parameters that cannot be assigned in the standard applica tion setup menus It should be noted that assigning these param eters requires specialized knowledge We recommend that those who do not have that specialized knowledge use the general parameter default settings How to use Add the following startup options and start the MPEG Station Mstation exe VEP file name ID board number VEP file nam
15. 9 d Specify which field of the frame is prioritized Refer to p 101 of this manual for the technical information gt e Q J X GOP complete This is a term not set down in MPEG specifications but it is a word that Canopus has adopted based on the concept that it resembles the structure called DVD VOBU The program stream creates groups of video and audio data packets that are called packs A pack is generally a group of two or more packets with a header attached but MVR D2200V output data places only one packet in one pack In the MVR D2200V the length of one pack is fixed at 2048 bytes unless Video CD is specified However video data quantity changes with each frame Therefore if video data is randomly divided into packets GOP boundaries and pack boundaries will not al ways coincide Thus the GOP completion mode deliberately makes GOP boundaries and pack boundaries coincide so it is the mode that makes it easy to process data However the non completion mode has a higher but only slightly higher effi ciency than does the completion mode In standard operation do not check the GOP Complete check box If the customer application is used to read encoded MPEG files and do some sort of processing check the completion mode to simplify processing This selection changes the program stream data structure as shown below 1 GOP completion mode check box checked The group of packs that store one G
16. C Program Files Canopus MVR D2000 Instalistield MVR D2000 Setup Select Features Choose the features Setup wil install 1377K 348K Space Required on C 23512 K Space Available on C 5870032K and applications for 2000 Series lt Back Next gt Cancel Driver and Application Required DV to MPEG Converter Development Kit Premiere Plug in Available only when Premiere has already been installed MYR D2000 Setup Select Program Folder Please select a program folder Setup will add program icons to the Program Folder listed below You may type a new folder name or select one from the existing folders list Click Next to conti System Setup 5 Set the destination folder and click Next System Setup System Setup SS 8 Choose Yes I want to restart my computer now and click Finish MVR D2000 Setup InstallShield Wizard Complete The InstallShield Wizard has successfully installed MVR D2000 Bi efore you can use the program you must restart your computer No will restart my computer later E Please reboot the machine and run MVR D2000 Property If you installed the development kit you will need Adobe Reader to read the online manual Please install Adobe Reader 6 0 as follows f b ct 0 3 0 0 ct C e System Setup Adobe Reader 6 0 Installation If you installed the development kit you will need Adobe
17. Hardware Descriptions Hardware Installation Connecting Peripheral Equipments Driver Installation Software Installation Uninstallation MVR D2000 Properties System Setup SS f i ct 0 J f 0 ct C U O Warning Please DO NOT connect headphones to this connector Hardware Descriptions Below are the descriptions for the connectors on the MVR D2200V board 1 Video output connectors Outputs from the video playback application and also loops through playback of video coming in from the input connectors To connect Composite RCA cables use the included conver sion cable 2 Video input connectors Inputs video from video devices To connect Composite RCA cables use the included conversion cable 3 Audio input connectors Inputs stereo audio for capture 4 Audio output connector Outputs audio through in capture mode Hardware Installation Precautions Static electricity can damage electronic components Take care not to touch connectors or cards directly When installing or working on your PC first touch a grounded metal surface This will discharge any static electricity on your body The total power consumption of the board is below Please be care ful not to exceed the power limits of your computer e MVR D2200V 5V 2 0A 12V 200mA 12V 100mA System Setup System Setup f lt b ct 0 3 0 0 2j C e Syst
18. Re REL exa 52 Assigning playback options irn ee cea Se ce Ee ced de EE ER RO Keg 55 Adjusting the overlay display size eeeesssseseesssseseeeenee ener 58 PfucuneBlume H 58 GEI T 59 Repeat playback noce e oe rer exi dr E ne edi R EXER NEERA enas 60 Details on Encoding Parameters seen nennen nnne nnns 61 OV OR VIOW E 61 HOW to uses riscontrato pinnis disce eei LE 61 f Table of Contents Table of Contents ss Chapter So urea ghi a d RACER QURE ERU RURASR URL EENE dA a RU e3 DV MPEG File Converter eeeeeeeeeeenenneennenennennennnnnnenn nnne nnne nnne 63 Startup and Functions of each section ssesssesesseseeeeeeeeenne enne 64 Startupprocedules 5 tnit E SES ERE ENSE TREE EN cR Fuer iens 64 Functions in each section 2 orn e tni e tiir etie trate tbe eiat riti k e tni rtr in 64 ulXeuuvlnlmeee 67 Procedures in file COnWVersiOD us s dioere tc en raa ten nr eia 67 Chapter D ocesssewuxaaaa ex xaa pda ROO E WO Rx a a ond Ges REN A Premiere Plug in inna iiie iter OH RED FUEL Ran DRE Ru EHE CERE ht 77 lum M 78 About the Premiere Pl g in rte r enini tror r recu inna 78 How to Operate incor RING inti eire eet cd 79 Movie CompilerMOGul
19. Reader to read the online manual 1 Insert the CD ROM 2 Open the CD ROM with the Explorer and go to AdbeRdr English and click AdbeRdr60 enu full exe Netopsystems FEAD Optimizer E Please wait while the Adobe Reader 6 0 Setup is being recomposed This will take a Few seconds depending on your operating system and hardware Recomposing data E Netopsysterns 3 Click Next 1G Adobe Reader 6 0 Setup A 4 Click Next 1G Adobe Reader 6 0 Setup Welcome to the Setup Wizard for Adobe Reader 6 0 The Wizard will install Adobe Reader 6 0 on your computer To MEC System Setup System Setup SS 5 Set the destination folder and click Next 1G Adobe Reader 6 0 Setup Destination Folder Click Next to install to this folder or click Change to install to a different folder gt Install Adobe Reader 6 0 to J ciprooran Fies Adobe acrobat 6 0 Change Destination Folder 6 Click Install 1G Adobe Reader 6 0 Setup Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation Tf you want to review or change any of your installation folder click Back Click Cancel to exit the wizard 7 Click Finish 18 Adobe Reader 6 0 Setup Setup Wizard Completed The Wizard has successfully installed Adobe Reader 6 0 Click Finish
20. Station e Playback z Playback Time o 0 00 0 00 0 00 0 00 0 00 IO O00 aaam 1 5 C 9 OME 1 Click on the program playback button to switch to the program playback mode If the play list has not been edited the play list editing menu will be displayed 2 Click on the program editing button and edit the play list For information on how to edit the play list see p 52 Editing the play list 3 Click on the option button assign the playback parameters and adjust the quality of picture on the overlay display For more information see p 55 Assigning playback options 4 Click on the playback button The file will play back as deter mined by the play list contents with the playback video being output to the personal computer s monitor and to the video output terminal To stop the overlay display click on the overlay display button again VA md th of hf 5 To stop click on the stop button Clicking on the stop button returns the playback position to the head of the file Click the pause button to pause MPEG Station SS se De TIP Right clicking on the selected parameter opens the File information dialog see p 62 uomeas 93AN Editing the play list Click on the play list edit button or on the program playback button only if the play list has not been edited to display the following window allowing you to edit the play lis
21. To quit the DV MPEG file converter click on the Finish button Finish Conversion Successful i Conversion Time 00 00 18 Mpeg E Documents and Settings Captures A_O Play M 6 240 608 byte When multiple files are converted the names and sizes of the out put files will not be displayed Output files cannot be played from this window To play an output file select play from File List This completes file conversion operations DV MIPEG File Converter DV MPEG File Converter DV MPEG File Converter a T il U lt x TU m 0 T 0 O e 3 lt u 7 ct u rie oO MP MVR D2200V EE ll oG07777 Chapter 5 Premiere Plug in This section explains how to use the Premiere Plug in Overview How to Operate To use the Premiere Plug in function DV to MPEG Con verter module along with the Premiere Plug in module must be installed at the MVR D2200V installation You must also place a check on Convert AVI file to MPEG which is shown in the paragraph MVR D2000 Property on p 32 of this manual U J 0 J 0 3 it U C n 5 Premiere Plug in Overview About the Premiere Plug in The MVR D2200V comes equipped with a plug in for use with Adobe Premiere Pro 1 5 The Premiere Plug in provided has the functions shown below Movie Compiler Module Parameter settings are equivalent to those of the DV MPEG file converter If you use the P
22. as below using audio cables not included For equipment that have RCA connectors please use RCA to stereo pin jack conversion cables ev LINE IN ee sc System Setup System Setup System Setup SS Driver Installation Below shows how to install the drivers Windows 2000 Windows 2000 Server Installation To install the drivers you will need to log on as a user with admin istrator privilege 1 When you start Windows after inserting the board Plug and Play will detect the hardware and a driver installation window will open Click Next Found New Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps you install a device driver for a hardware device To continue click Next Sets Cancel 2 Click Search for and click Next Found New Hardware Wizard Install Hardware Device Drivers gt A device driver is a software program that enables a hardware device to work with an operating system This wizard wil complete the installation for this device oy Multimedia Controller 0 A device driver is a software program that a hardware device work Windows Tesch dive fics oie new Gov To boats ava fet Erk corp tate lt instalation cick Next 0 What do you want the wizard to do cr Besos sate diver o my Goce Deco ded 0 Dries a otie karir divare foc if
23. audio and video and records each simultaneously as separate files Specifying either Video or Audio allows independent encoding of video and audio If the box Wave Format is checked video is encoded and audio as non compressed PCM data is recorded simultaneously in separate files Video CD Creates MPEG1 files based on the Video CD format This parameter cannot be selected if data is recorded at other than the 44100 Hz audio sampling rate After completing the settings click on Next DV MPEG File Converter 6 Specify the video data settings NEXU bps 4000000 15000000 B EGG fe 4000000 15000000 When video CD is selected G CBR C veR GOP Pattern Picture 15 3 F GOPsfor steaming Intewal 3 35 Closed GOPs C IFrame fen Pictwe iE mew FS D cbsedGoRs E LJ Profile amp Level Main Profile amp Main Level MP ML v Image Size FULL D1 1 v 720 480 cd tees Display windows will differ according to the file format for conversion If the Video CD format is selected If the Video CD format is se lected audio settings described on the following pages can be done in step 5 Bit rate Assign the video data bit rate and coding format The video bit rate is set in units of 400bps If the video bit rate is not set in units of 400bps the setting will be automatically converted to units of 400bps The higher the bit rate the better the pictu
24. bps 1M to 1 8M bps encode decode GOP configuration IBBP M 1 to 3 N 1 to 30 l only M 1 N 1 Closed GOP is available Audio compression ISO IEC 11172 3 Layer 2 Real time processing as determined by software No compression WAVE file can be created by Linear PCM Audio bit rate 128 160 192 224 256 320 384 Kbps Multiplex format Interrupt Resources used ISO IEC 13818 1 MPEG 2 program stream ISO IEC 11172 1 MPEG 1 system stream Non multiplex Elementary streams for video and audio Use 1 channel of IRO allocated during PCI configu ration on personal computer Memory space Use 512 bytes allocated during PCI configuration on personal computer Current consumption Maximum 5V 2 0A 12V 200mA 12V 100mA Outside dimentions 175mm x 107mm without including projecting parts Weight 200g without including the provided parts Appendix X U C oO Q lt Appendix
25. connecting multiple MVR boards to one system multiple boards will show up in these settings 2 8 0 Mvrd2000 Device Power Management 0 lt i ct gt 2 Set the necessary device settings If the Convert AVI files to MPEG box is checked the driver requires extra f memory space upon startup approximately 3 7MB If you wish to turn off o this feature uncheck this box U Device Properties Card Information Name Mvrd2000 Product MVR D2200V Capture Playback IV Monitor WE Status This device is working properly Device Properties for Card Information Tab 7 MVR D2000 Properties Device Power Management C Disable Power Management or 2000 C Conform to Windows 98 WDM Immediately after the driver is installed Conform to Windows 2000 is selected If the system is unstable change the setting to Conform to Windows 98 WDM or to Disable Power Management if the system is still too unstable 1 Disable Power Management This disables power management IRP processing requests from the Power Management is passed to the low level driver 2 Conform toWindows 2000 This operates as a power policy owner based on the Windows 2000 Device Driver Kit build 2195 3 Conform to Windows 98 WDM This operates as a power policy owner based on the Windows 98 Device Driver Kit or the Windows 2000 Release Candidate 2 Device Driver Kit 4 Click OK System Setup
26. convert but conversion was made at 2 2 gamma as theory states causing too great a rever sion to source We thus need a conversion of intermediate lev els With the MVR D2200V we have made the gamma value 1 5 for using the software MPEG station to save still pictures When SDK is used to save still pictures the parameters as signed by API allow any gamma value desired to be specified When the gamma is 1 the relationship is linear with no conver sion but when gamma is higher than 1 the relationship be comes curved and the larger the gamma value the greater the curve x ipu ddwy 104 Digital three dimensional YC separation With composite signal video the brightness Y and color C signals in one signal are in a mixed state To convert a composite signal into RGB data that can be handled by a personal computer the Y and C data must first be sepa rated There are three methods of separation One dimensional YC separation This method separates Y and C using the relationship between dots in the left and right directions frequency characteristics This was the method of separation used in almost all old style TVs because of the simplicity of reproduction by analog cir cuits There are however recent digitalized versions of this method The method does have disadvantages in somewhat lower reso lution but it does not produce any color noise Two dimensional YC separation This method separates Y and
27. format to either CBR or VBR Maximum bit rate in 400bps units can be simulta neously assigned only when VBR is selected Set the GOP pattern to either Frame GOP configured from pictures only or IBBP GOP configured from three picture types B and P which allows the following parameters to be as signed Number of pictures Assigns the number of pictures that can be contained in one GOP in a range of 1 to 30 When Frame is selected the num ber of pictures is fixed at 1 Interval Assign in a range from 1 to 3 the cycles in which or P pictures will appear When Frame is selected the cycle will be fixed at 1 GOP complete This setting takes each pack group that stores one GOP of video data and its accompanying audio data as one unit and com pletes one GOP within it GOP complete cannot be assigned if the mode of the file to be created is MPEG1 or Video CD Closed GOP Makes the images in a GOP independent from other GOPs and assigns a Closed GOP flag indicating that it is playable eField order For specifying field order during MPEG capture MPEG Station eGOP Pattern Ma zie Mv iwiiela n MPEG Station cM S U I 0 f ct 0 ct 0 5 Audio tab Capture parameter settings MPEG Video Audio Sampling rate Audio bit rate eSampling rate Specify the audio signal sampling rate e Audio bit rate Specify the bit rate for audio data The higher th
28. frames in an image that makes up one GOP The parameter called N has that value The general setting is about 15 The maximum is 30 Interval Assign the cycle in which pictures other than the B picture I or P appear The values that can be assigned are 1 to 3 If 3 is specified for example the image row will be IBBPBBPBBP If 1 is specified that will eliminate the B picture and the row will be IPPPP This is the value of the parameter called M Generally 3 is specified Appendix Appendix NS Closed GOP As shown in section GOP Pattern each picture other than the picture compresses the content of pictures forward and back ward in time That is why one cannot uncouple while data is being compressed and switch to connect to data in another section in order to edit This is the same as for the GOP bound ary section The GOP header is an picture but after that there are B pictures among P pictures and ordinarily reference is made to the final P picture in the previous GOP If Closed GOP is checked the B picture will not refer to the forward picture In other words the data within the GOP is completed and in prin cipal the image can be reproduced even if data on the GOP boundary is uncoupled However that reduces compression efficiency In ordinary operations do not check the check box If the software used can edit closed GOP structure MPEG files in GOP units check the check box Field Order
29. not checked the following message appears when the DV MPEG file converter starts Please change the settings in the MVR D2000 Proper ties dialog box restart your PC and then start the DV MPEG file converter again CDV2MPEG t Failed to initialize converter Functions in each section The following window appears at DV MPEG file converter startup F DV MPEG File Converter T Include audio with video Start Frame End Frame oo Canopus DV Format 720 x 480 PCM 16bit STEREO 48000 Hz This is what the window looks like when the button is clicked This window is for explanation purposes and is different from the window that will actually be displayed DV MPEG File Converter 1 6 7 8 9 Specify the conversion source file Can also be entered by dragging and dropping the file from Explorer Shows the menu for previewing the conversion source file Menu content displayed differs according to PC environment Clicking on the button expands the window for specify ing start frame and end frame Click on the 4 button to return to the original window To specify the start frame either enter a number directly or use the slider To specify the end frame either enter a number directly or use the slider Opens the option window Starts the wizard for converting files Ends the DV MPEG file converter Select Use FileList to convert multiple f
30. strong correlation between the sig nals on the right and left channels Dual Use when there is almost no correlation between the signals on the right and left channels Use this setting to record completely different sound on each channel Mono Records audio signals on only one channel Only sig nals input to the left channel input pin will be recorded Emphasis Emphasis enlarges the high level of audio during recording and returns it to the source during playback to reduce the effect of noise during recording and transmission Analog recording on magnetic tape will include noise from the high frequency component that produces a harsh sound Empha sis gives a relative reduction in the effects of high frequency noise However since all recording by the MVR D2200V is digital emphasis has almost no practical effect It is supplied for compatibility with systems used for playback Usually you don t have to select emphasis Appendix Appendix Appendix NS Protection Click on the check box to add a check mark and that will add an error check code to the audio data Original and Copyright Click on these check boxes to add a check mark and that information will be recorded in the header of the audio data created Original This indicates that the data has not been copied that it is original data Copyright Indicates that the data is copyrighted This information does not affect the dat
31. the use of captured materials System Requirements Please confirm that your PC system meets the system require ments below for using the MVR D2200V PC Unit Intel Pentium IIl 866MHz or over 128MB of memory 1 open PCI bus slot V2 1 or over CD ROM drive Operation system Microsoft Windows Server 2003 For image overlay the hardware acceleration on your display adapter needs to be set to highest and the DirectDraw accelerator needs to be turned on Microsoft Windows XP Professional Service Pack 1 or later Microsoft Windows XP Home Service Pack 1 or later Microsoft Windows 2000 Professional Service Pack 4 or later Microsoft Windows 2000 Server Service Pack 4 or later Graphics Support for resolutions larger than 640x480 in 16bit color or higher Requires 800x600 or larger for x1 size overlay Sound System Sound board which functions on WDM driver and which has analog LINE IN terminal About IRQ This hardware requires one free IRQ While this hardware can share IRQs with other devices many devices that report they can share IRQs may not share IRQs properly PA Before Installation e O p o rb oO oO di 8 yy oO m Before Installation U v h 0 g t 5 0 ct v n ct a S oOo MPF MVR D2200V MVR D2200V Chapter 2 System Setup This chapter describes how to setup the hardware and software to your system
32. C signals by making use of the vertical relationship between dots It is generally called a comb filter It requires one line of memory At one time a glass delay device was used in analog TV sets but now digital one line memory is used Color noise such as white diagonal lines on a black background is generated when the vertical association between dots is low but because of its high resolution this is a format that is widely used today Three dimensional YC separation This method separates Y and C signals from the time relation ship of dots displayed in the same position and of all the pro cessing procedures conceived of today this is the one that gives the highest resolution Still sections with a strong correlation on the time axis use the time axis and moving sections that have low correlation on the time axis use the vertical relation ship two dimensional to process A digital frame buffer and motion detecting device are mandatory Either two dimensional or three dimensional YC separation can be used in the MVR D2200V DUUM dApendx X I C O lt Appendix NS Digital three dimensional digital noise reduction Conventional noise reduction is in either the one dimensional or two dimensional direction and removes noise in that direc tion by dropping the entire image s frequency characteristics thus creating the problem of affecting sections that have no noise The three dimensional digital noise
33. Cause 7 Remedy 7 Low recording level during capture Either adjust the volume on the source or change the source Recording level during capture can not be adjusted in the MVR D2200V Input settings on audio equipment are wrong only when audio equipment is connected Change the settings on the audio equipment so that the audio equipment s input terminals that are connected with the MVR D2200V audio out put terminals can be used Inappropriate settings on Windows mixer only when connected to sound card Check to make sure that the mute is not enabled or adjust the line input level on the Windows mixer Sound card not set up or not operating A sound card is required for MPEG WAVE file playback Check to make sure that the sound card operating on your OS is set up and operating correctly Q Cannot check results of adjusting picture quality Cause Remedy Preview display is not enabled Click on the preview button to enable the pre view display Then click on the overlay button or the video output button Use the personal computer monitor or an externally attached tele vision monitor to check the results of picture quality adjustment X I C O lt Appendix NS Hardware Specifications Input Output format NTSC PAL 7 pin mini DIN connectors 1 set Use an S video cable or the pin jack converter cable provided and connect the composite video cable Input terminal 7 pin mini
34. DIN connectors 1 set Use an S video cable or the pin jack converter cable provided and connect the composite video cable Output terminal Input Video quality Brightness Contract Hue and Saturation can be adjusted The adjustment will be applied to the output video Input Video quality Input video while capturing and Output video l while playback can be displayed with overlay Overlay preview Display hardware and software which support the overlay function by the Windows DirectX are required The video quality Brightness Contrast and Satu ration for Input video while capturing and Out put video while playback can be adjusted The adjustment does not affect the encoded result Overlay video quality RCA pin jack stereo 1 set Input terminal Input impedance 22kQ typ Full scale input level 2Vrms gt E LINE OUT 3 5mm Stereo mini jack 1 set 0 Output terminal Matched load impedance 10kQ or over J MAX output level 2Vrms Q 5 Sampling frequency 32kHz 44 1kHz 48kHz Bandwidth 16 bit 110 DUUM Append Video Compression ISO IEC 13818 2 MPEG 2 ISO IEC 11172 2 MPEG 1 Profile level MP ML MPEG 2 MP LL SP ML Resolution NTSC PAL 720 x 480 Full D1 720 x 576 Full D1 352 x 480 Half D1 352 x 576 Half D1 352 x 240 SIF 352 x 288 SIF Video bit rate MPEG MPEG2 Full D1 MPEG2 Half D1 SIF MPEG1 SIF 4M to 15M bps 2M to 8M
35. FL ALAS MVR D2200V User Manual Notices and Warranties SS Z s ct D 0 0 in J 23 3 in J q 0 0 9 Notice to Reader Canopus Co Ltd makes no warranty of any kind with regard to this material including but not limited to the implied warranties of merchantability and fitness for a particular purpose Canopus shall not be liable for errors contained herein or for incidental consequential damages in connec tion with the furnishing performance or use of this material This document contains proprietary information which is protected by copyright All rights are reserved No part of this document may be photocopied reproduced or translated into another language without the prior written consent of Canopus Co Ltd The information in this document is subject to change without notice FCC Notice This equipment has been tested and found to comply with the limits for the class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television recep
36. OP of video data and the audio data that belongs to it is called one completion unit One GOP is complete in one completion unit and no other GOP data is in it If data that should be entered into those units is completed in the pack padding data data that con tains no information but is entered in order to adjust data size is entered into the remainder of the pack A system header is attached to the first pack of all comple tion units 2 Non completion mode no check mark Does not recognize delimiters such as completion units and if a GOP ends while the pack is still underway data from the next GOP is entered into the remainder of the pack A system header is attached only to the first of all packs DUUM Appen X I C O lt Appendix NS x ipu ddwy Audio tab Sampling rate Sampling rate v Hz Specify the audio signal s sampling frequency The selections are either 32kHz 32000Hz 44 1kHz 44100Hz or 48kHz 48000Hz 44 1kHz is the frequency used for audio CDs and Video CDs and 48kHz is the frequency used for DVDs There is little difference in which one is selected but from what we have seen so far the optimum combination with MPEG1 video would be audio of 44 1kHz and the optimum combina tion for MPEG2 video would be audio of 48kHz For particular reductions in data size select 32kHz Audio bit rate Audio bit rate 224 Y Kbps To compress audio under MPEG audio spe
37. RSONAL INJURY THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 0 o D G u C e E U C u 0 0 oO D ia Z b m s ct fo fl i f 3j Q J J fi J cf frl i Notices and Warranties Declaration of Conformity According to FCC Part 15 Responsible Party Name Canopus Co Ltd Address 1 2 2 Murotani Nishi ku Kobe 651 2241 Japan Declares that product Model MVR D2200V Complies with Part 15 of the FCC Rules oOo MPF MVR D220V Table of Contents Table of Contents ss D ie D o h C 6 J ct 0 J ct g Table of Contents Notice to ROad er saicicccscics cecaceeasaceetecetecssaceinsneeearastencesttedesetecatectetecctedsstetessaceeccssies 2 FCO Notice iii nitittine creen EE cete ahaa IR ELE Ed ce Le ERE Da dE 2 Warranty PETERET DIETER 3 Declaration Of Conforinity 5 5 nennen rine etaed itai nnaae 4 Table of Contents errore re teeth teer Un Ex na e ara adde u dus 5 Chapter T uissassikxtidadamaad ue Rd Cia ER dad Ra icd adds acd nk 9 Betore Installation iet eon iei 9 License Agreement cierre deae aee seu iaa iu i LAES EE Eana ESES esas 10 Package Contents cu oneri enenatis crepat do SESA tenyuesvas TEs ies ESEAS Sanasi 10 MVR D2200V product contents orent peste roa crean ce jn En sainia 10 SitnnIiadl dee ri
38. a 10 arp m 10 System Requirements sssssssssesseeeeeee enne nnne nnne nnne nnne nennen ne nrs nnn nennt nnn nnns 11 cS 11 Operation SySEtelic dee tiet corr e rd EER EE EE eae AA UR EPRERVERS ER UIS EE TERR ERE ER PER ERR eR ERUE anaes 11 eire 11 SOURnd SySteltr sitire tano e rore Pr Pr ei E SERERE RE ides E A ceases 11 Udemm 11 G apter c ee ee ee ee eee eee 13 System Setup Pe 13 Hardware Descriptions eee aaa a nematic 14 Hardware Installation 5 eccentric an poeta enar an neis 15 IP ERREIMOIIIPO 15 Inserting Rips dofor uo et 16 Connecting Peripheral Equipments cc ccccceessceseeeeseeeeeeeeseeeeeeeeeeaessaeennaeeeeeeeeaeeesaeeeaes 18 Connecting systems with S video sessssssssseeeeeeee nennen nennen 18 Connecting systems with component ssssssessseeeeeenne enne nnns 18 Connecting audio input connector eesssseeeeeeenenneneeneen rennen nennen nne 19 Table of Contents Connecting audio output connector esssssssseeeeeneenneneee nennen nennen nnne 19 3ehnclrui me 20 Windows 2000 Windows 2000 Server Installation eeeenee 20 Windows XP Windows Server 2003 Installation eeeeenn 23 Software Insta
39. a when it is played and converted to analog signals Use when you want to include the information described above in the data How ever do not check original unless the customer encodes created audio signals gt e Q J X DUUM Appen Assigning playback parameters Show the last frame at stop Show the last frame at stop f None f Field Frame For specifying how the menu is to be displayed after the MPEG file has finished playing None Makes the menu display black The video signals continue to be output but the menu content is blacked out Field Continues displaying only one side of the field in the final menu There will be no blur even in the moving parts of the picture but the resolution in the vertical direction will be cut in half Not available in MVR D2200V Frame Continues displaying both fields of the final menu Resolution in the vertical direction will not drop because of that but the moving sections will be blurred Pan scan display when aspect ratio is 16 9 Not available in MVR D2200V When not checked The entire screen will be made video output without the de coder making conversions to video output no matter whether the MPEG data aspect ratio is 16 9 or 4 3 If video output is connected to a wide TV check this check box Then use the TV s programming functions to switch to the optimum display as determined by playback data aspect ratio Appendix
40. aken of a true circle and the diagram shows what happens to them Ui Shown on a 16 9 TV Shown on a 4 3 TV The video shown below is on a 4 3 TV and because the 16 9 image is converted for 4 3 TV use the entire video becomes 4 3 ee For 4 3 TV use with black bands placed at the top and bottom of the 16 9 image Appendix No matter which radio button for aspect ratio is checked the number of encoded pixels per line will remain always at 720 dots The only difference in the encoding operation is that ei ther data indicating 16 9 or data indicating 4 3 will be input into the header of the created MPEG stream The header data determines switching of playback image out put method during decoding Appendix NS Video bit rate Video bit rate 6000000 pps 12000000 bps For specifying the video data bit volume Increasing the bit rate improves picture quality but it also greatly increases file con sumption volume The numbers are the necessary data size per second of recording time Since the specification is made in bit size to convert it into bytes divide by 8 If for example you want to specify 8 000 000bps 8Mbps i e 8M bits per second or 1M bytes then in one minute of recording 1M bytes x 60 seconds means that you will need at least 60M bytes of avail able disk space if audio is being recorded simultaneously the volume of data for the audio must be added The general ta
41. arameters Assigning the capture parameters MPEG tab Mode Mode MPEG MPEG1 Select to encode video in MPEG1 format MPEG2 Select to encode video in MPEG2 format e Video CD Select to create MPEG1 files in video CD format Stream type Audio Encodes only audio signals and records the resulting elementary stream into a file gt e Q J X Video Encodes only video signals and records the resulting elementary stream into a file Audio and video Encodes both audio and video signals and simultaneously records the resulting elementary streams into two separate files System stream when MPEG 1 is selected Program stream when MPEG2 is selected Encodes audio and video signals multiplexes those results and records them 84 in one file Profile and Level MPGM C MP LL C SP ML MPEG2 specifications permit an extremely broad range of pa rameters and with the vastly different ranges that are supported by different products a great deal of confusion can be antici pated That is why we have set up guides which are profile and level that are divided into several hierarchies Three types of profiles and levels are usable in the MVR D2200V MP ML MP LL and SP ML The highest level is the MP ML MP2ML is the standard for standard TV Not HDTV Almost all MPEG2 decoders the most widely used at the present time are for handling MP ML and as long as there is no special
42. at is shown is not the actual converted data it is the result of arithmetic logic operations on the programmed values g _ DV MPEG File Converter Codec tab Select the codec to use in conversion This tab is shown only when more than one Codec are available for DV MPEG file converter 4 To convert multiple files Select the Use FileList from the File menu and open the File List window To register the file in the File List first specify the file and then click on Add D Click this button o Specify a fi Y DV MPEG File Converter mE Video Canopus Sample 4 261S mples 8_01 v E 10 369 424 byte IF Include audio with video aj Start Frame End Frame a sample 8r 131331 sempe I Options Add Q Qose Canopus DV 720 x480 PCM 16bit STEREO 48000 Hz Click Add The file is added to the File List When the File List starts up the Convert button changes to the Add button The display widths of the IN and OUT points are adjusted by clicking with the mouse Close Closes the file list IF you close the file list registered data are deleted Del Deletes selected file from the file list Clear Deletes all file from the file list Play Previews converted files CONV
43. at the next startup TM Initializes with the saved value at the time of the next starting Saves the current settings and use it as the default settings at the time of rebooting 8 OK After reflecting the results of adjustment and recording the adjusted value makes a return to the playback mode window 9 Cancel Deletes the adjustment results and makes a return to the playback mode window Still Capture parameter settings Click on the option button to select Still Capture parameter settings The windows below will appear to allow the settings for still picture capture The size of sources that can be acquired are Capture mode NTSC 720x480 PAL 720x576 Playback mode NTSC 720x480 352x240 352x480 PAL 720x576 352x288 352x576 If vertical lines of the source are 480 or less the still image capture is performed by FRAME in any setting Still image capture setup eStill image capture setup FRAME Captures still pictures in frames Odd field Acquires the odd numbered lines and expands them to double size Even field Acquires the even numbered lines and expands them to double size MPEG Station g N MPEG Station cM Displaying file information Click on the option button Select File information The window shown here will appear Information on the selected file will be displayed File information P d birthday 01 m2p
44. ate Video CDs Selecting Video CD MVR D2200V creates files in the following formats DUUM Append Glossary Appendix Appendix NS SCR initial value O i Video CDs can be created by obtaining Video CD creation soft ware not provided that is available on the market and that can read these data formats DVD Video DVD Video records in program stream format DVD Video uses MPEG2 video The kind of MPEG data format required by DVD authoring software will differ according to software type but generally it reads the elementary stream and then multiplexes it with the program stream inside the authoring software Au dio data will be read as MPEG audio elementary stream or uncompressed PCM data and as a separate file The MVR D2200V supports recording in video and audio el ementary stream or audio PCM format so that the encoded data can be used as described above for video elements that create DVD Video x ipu ddwy 100 Frame and field makeup NTSC video has 525 scanning lines per frame with 486 of those lines structured to carry signals for video However two of those lines carry signals on only half and cannot be used for digital video Line no 21 is used for closed caption signals in the United States so that line is usually excluded Removing those three lines gives us 483 lines that remain as effective video signal carriers Interlacing every other line gives 241 lines with a forward im age t
45. ause 1 The preview display and video output are not enabled Remedy 1 Click on the preview button and the video out put button to enable the preview display and video output Cause 2 Input assignment for video equipment is wrong Remedy 2 Change the settings on the video equipment so that the MVR D2200V video output terminal and the connected video equipment s input terminal can be used Q Audio not being input or volume is extremely low Cause 1 Using an audio cable with resistance Remedy 1 Use a cable with no resistance Use of a cable with resistance will greatly reduce volume Cause 2 Inappropriate MPEG Station audio volume con trol Remedy 2 Use the monitor volume control fader on the MPEG Station to adjust the volume Cause 3 MPEG Station s mute button is enabled Remedy 3 Click on the MPEG Station s mute button to re lease the mute Q No sound at file playback or volume is extremely low p Cause 1 Using an audio cable having resistance 3 Remedy 1 Use a cable with no resistance Use of a cable with resistance will greatly reduce volume i Cause 2 Inappropriate MPEG Station audio volume con trol Remedy 2 Use the monitor volume control fader on the MPEG Station to adjust the volume Cause 3 MPEG Station s mute button is enabled Remedy3 Click on the MPEG Station s mute button to re lease the mute 108 Appendix Cause 4 Remedy 4 Cause 5 Remedy 5 Cause 6 Remedy 6
46. cessing because on the computer each R G and B has a value of 255 at its brightest and 0 at its darkest However an actual video picture contains values of 236 and above and 15 and below The expansion processing described above must clip the values because of the maximum 255 and the minimum O The result often is that the bright sections and the dark sections appear flat as if they were saturated Another method is not to expand the range but keep it as is and handle it as bitmap data When that is done and the video im ages are adjusted correctly as called for in the specifications there appears to be a slight reduction in contrast when viewed as a bit map The decision was made to create bit map data using the latter method when saving still images on the MVR D2200V software MPEG station The reasons for doing so are as follows The reduction in contrast caused by not using expansion pro cessing is relatively small Data that is clipped through the use of the first method above cannot be restored to what it originally was but the range of data saved in the second method can be expanded by repro cessing later When using SDK to save still pictures the parameters assigned by API can be used to specify which processing will be per formed DUUM Appen X I C O lt Appendix NS Gamma conversion when saving still pictures The values of R G and B video signals are gamma corrected when the p
47. cifications see next paragraph specify the post compression data quantity in bits per second The unit is kilobits per second Because of the overlap between sound quality and data volume normally 192 224 or 256 should be selected Audio format Poise S8 pen idorof2 Layer 2 Audio signals are compressed based on MPEG audio layer 2 specifications For channel configuration refer to sec tion Channel on the next page PCM Stereo Records non compressed linear PCM data on two channels Video can be selected only when it is recorded as el ementary stream Creates a WAVE file separate from video data PCM Mono Records non compressed linear PCM data on one channel Video can be selected only when it is recorded as el ementary stream Creates a WAVE file separate from video data Records only signal input to the left channel input terminal Channel Stereo Audio can be encoded efficiently if there is a certain correlation between the signals on the left and right channel Use this setting to encode music and other stereo signals The signals on the right and left channels such as standard music and other signals closely resemble each other Thus the two channels don t have to be independently encoded the properties of the parts closely resembling each other can be used when encoding thus providing a higher quality compres sion These settings give compression like that Joint Use when there is a
48. e Composite 3G 04 Playback z 99 99 Record Time ea Oniy Capture Frame xS capture m2 ooo 0 45 7 FOE CON ey i j COR O 1 Click the Video input select button to select the video source 2 Click the Preview button to display the input video 3 Click the Options button to open the capture parameters 4 Click the File options button to set the capture file name and location 5 Click the Capture time button to set the capture time 6 Click the Image quality button to set the input video quality 7 Click the Record button to start capturing Click the Record button again to stop capture Monitoring Video and Audio You can monitor the input video and audio on the computer screen and on an external monitor as below 1 Viewing on the computer screen Click the preview button then click the overlay display button 2 Viewing on an external monitor Click the preview button then click the video output button MPEG Station Tip You can click the overlay size button to change the overlay screen size You need to separate the screen area and the control area to change the screen size WARNING The audio LINE OUT terminal of MVR D2200V is exclusive for LINE OUT Please DO NOT connect headphones to this connector MPEG Station MPEG Station SS Overlay quality adjustments Click the overlay quality adjustment button to adjust the overlay image quality This se
49. e The switch and file name that will en able the detailed encoding param eters ID board number Multiple startup switches board number is the number of the board that will be started If this num ber is not specified a search will be made for usable boards and one of those boards will be started For an explanation of detailed commands and parameters see VideoEncoderParams TXT which is in the installation folder for the MVR D2200V Module The default directory for the file is Program Files Canopus MVR D2000 MPEG Station B C Q p u p 0 0 LU Q 2 NIPEG Station oO MPF MVR D2200V MEME A 2 7770 Dm Chapter 4 DV MPEG File Converter This chapter explains how to use the DV MPEG file Converter Startup and Functions of each section File Conversion Using these functions requires that there be a check on Convert AVI file to MPEG which is shown in the paragraph MVR D2000 Properties on p 32 of this manual DV MPEG File Converter m Startup and Functions of each section U lt 4 U m T 0 Q J A J ct J g Startup procedures Move from the start menu to All Programs programs when in the Windows 2000 environment and to MVR D2000 and then select DV MPEG File Converter to start the DV MPEG file converter f the MVR D2000 properties are assigned see p 32 in this manual and the item Convert AVI file to MPEG is
50. e at stop The methods for displaying windows when the playback of a moving picture files ends can be assigned in any of the follow ing ways None Renders the screen totally black This option is selected at default Field Not available in MVR D2200V Displays the last image in field still state Frame Displays last image in frame still state ePan scan when aspect ratio is 16 9 Play back files in pan amp scan picture has right and left edges cut off when the image has an aspect ratio of 16 9 This option is turned off at default When this option is turned off the entire picture will be displayed in full screen The 16 9 image cannot be displayed in so called letterbox style This setting is not available in MVR D2200V MPEG Station Use the timestamp PTS DTS inside the bit stream Check the box to use a time stamp PTS DTS in the bit stream during playback of an MPEG1 system stream or MPEG2 pro gram stream This option is turned on at default If the time stamp is not used the video and audio may be out of sync This setting is not available in MVR D2200V n MPEG Station BET Overlay parameter settings Click on the option button and select Overlay parameter settings which displays the window below for setting the picture quality of the overlay display Overlay settings ck en None Flipping Progressive Adjustments 1 None The vide
51. e bit rate the better the audio quality but the greater the size of the audio file e Audio format Specify the audio data format If the created stream mode is other than Audio or Audio Video or if the file mode is Video CD then no format other than Layer 2 can be selected eChannel Specify the audio channel mode eEmphasis Specify to perform emphasis encoding eProtection Place a check in this box to create files on which CRC error detection can be performed Original Place a check in this box to create files that have original bits eCopyright Place a check in this box to create files that are copyrighted eVideo processing Select the YC separation of composite signals and the creation of noise filters eRAPCON Some video equipment may make the color at the top of the image different from the actual image If that happens turning on RAPCON check the box will improve the color eIRE Setting Specify the Black level Usually set the black level to 7 5IRE in North America OIRE is the setting for video system for Japanese teritory IRE setting is only available for NTSC MPEG Station MPEG Station MPEG Station SS Adjusting picture quality Adjust the parameters below to adjust the quality of the input picture Before adjusting picture quality set the options so that the input video is displayed on screen MPEG Station Je C EESE JI OU Pr JU io b dr de d
52. e n irte teet ERE a epe Nee REDE daar ei ete 79 a ac HE ETRREITETETTTTTTTIITTTTEMM 81 Online Mania orta oin tii peter nene takina kaaa laien 81 How to Use the Online Manual ceccseceeceeeeeeeeeeeeeeeeeneeseeeeeeseeeneeeeeaeesaeeeeesaeeeeeeeeesaeeaes 82 Before starting the online MANUAl a iccssscsecascessccsccasenateasecssctecicceasieansisnendecaderstcanetecenarsaieiaie 82 n Starting the online Manual 2 2 ttt ranae unir earn n aoa asaina 82 i Install onto the hard drives tm expe erea a cher eren dr ee Ern e rex REF tea 82 x How to operate Adobe Reader 6 0 piniis ienaa aenean aiaia d aak aaa ainaani ai 82 ARDENNES cens dadesa doo p ER Rada duci card aee oc cie o orc o EROS Ru de ea3 z Explanation and Analysis of MVR D2200V Programming Parameters 84 5 Assigning the capture parameters ecceeseeseeseteeeeeeeeeeeseeeeeeeseeeeseeeeseeaseeeeseeeeseeaseneesenees 84 0 Assigning playback parameters caa eaa raaa a aaaea a OEA Aa nennen nnne i 97 e E E A an eee elas 99 Troubleshooting sssi asea sans a SEEE Aa 107 Hardware Specifications sintirina aa aai a aa da redada nnn saaan Ea Edasis 110 ED oO MP MVR D2200V MVR D2200V Chapter 1 Before Installation This chapter explains about things to know before installing the MVR series board License Agreement Package Contents Customer Support Precautions System Requirements
53. em Setup Inserting the board Please follow the steps below to insert the board to your PC 1 Shut down Windows and turn off your PC 2 Remove all power cables from your PC 3 Remove the PC cover Please refer to the instruction guide for your PC 4 Remove the PCI slot cover M i M sh i 5 Insert the MVR series board to an open PCI slot 6 Screw the bracket to your PC dnaes weasksS System Setup j A 7 Close the PCI cover and connect the power cables System Setup SS D lt i ct iu j f i ct jm U Connecting Peripheral Equipments Connect Video Equipment to the MVR D2200V boards as below Connecting systems with S video Connect equipment with S Video connectors as below using S Video cables not included Connecting systems with component Connect equipment with component RCA connectors as below using the S Video component conversion cables included and composite video cables not included e v Connecting audio input connector Connect equipment with audio connectors as below using audio cables not included For equipment that have stereo pin jack connectors please use RCA to stereo pin jack conversion cables ev LINE OUT Connecting audio output connector Connect equipment with audio connectors
54. eo is set at bottom field first Positions in video signals captured in the MVR D2200V The parts of video signals shown below are recorded when video is captured in Full D1 size Vertical direction When captured by top field first Lines 22 to 261 from odd numbered fields Lines 285 to 524 from even numbered fields xipusddvy When captured by bottom field first Lines 23 to 262 from odd numbered fields Lines 285 to 524 from even numbered fields Horizontal direction Start from a point about 9 0p from the leading edge of the horizontal sync signal the luminosity signals for 720 pix els are sampled at a 13 5MHz sampling frequency and the 102 color differential signals for 360 pixels are sampled at a 6 75MHz sampling frequency Data conversion when saving still pictures Range of pixel values when saving still pictures The standard specifications for digital treatment of video sig nals is that when the three primary colors R G B are each represented by 8 bits numbers they are determined to be ad justed so that each R G and B signal will be 235 at the brightest and 16 at the darkest Values of 236 and above and 15 and be low are regarded as margins There are two concepts for handling these video signals on the computer as bit map data and saving them as still pictures One is expansion processing of each R G and B so that the 16 235 range will become 0 255 This expansion is theoretically correct pro
55. ever the file name will be allocated automatically Selecting Display bitmap displays a still picture in BitmapView Start Frame End Frame 44 70470 sempe iss 254 554 sample Ba Copy bitmap Bi Save bitmap _ DV MPEG File Converter File Conversion Procedures in file conversion 1 To specify a file name either enter the name of the source file for conversion into the Video or Audio field or specify the name by clicking on the g button or specifying the file name by dragging and dropping the file directly from Explorer FA DV MPEG File Converter Video C Documents and Settingstwada hiDes v EAE 29 713 392 byte Audio v El V Include audio with video Ly Options Convert Close Canopus DV Format 720 x 480 PCM 16bit STEREO 48000 Hz When converting a DV format AVI file for which sound has been captured in advance place a check on Include audio with video 2 To convert just part of a file click on the v button Use the slider to specify start frame and end frame and then click on Convert To convert an entire file select the file click on Convert and then go to step 5 FA DV MPEG File Converter Video C Documents and Settings wada hiDe v sje 2913382 byte Audio el IV Include audio with video Start Frame End Frame 44 7070 sample 159 254 654 sample 1 Zh Tip To go back to the window in step 1 click on the 4 button
56. ext file Jump to the next file in program playback mode Stop Stops playback and return to start Repeat Repeats the current playback Still capture Click here to capture a still image from the current video Program playback Click here to switch to program playback mode Playlist Click here to set the playback list for program playback mode File select Select the MPEG file to playback Option Sets the options for file playback You can also see the settings for the current file Overlay size Sets the overlay image size File number key In program playback mode click here to select the file to playback Monitor level fader Click here to adjust the input audio level for monitoring You can use the wheel on your mouse to adjust this level also You can not adjust this audio level when playing WAVE files Mute Click here to mute the monitor audio Interface mode Click here to attach or separate the overlay display area from the main control area Homepage Click here to jump to the Canopus Homepage Version info Click here to display the version info MPEG Station n MPEG Station SS uomnea3G8 DAdWN Capturing Video Basic operation f canopus MPEG Station
57. f birthday 01 m2p birthday 02 m2p birthday 03 m2p Filename birthday 04 m2p EN Files of type Program Stream File m2p Cancel P 3 The selected file will be inserted at the cursor position specified in Step 1 Edit Program Play List Nu Name Folder name EE 1 birthday 01 m2p C C Documents and Setti Documents and Seti Ef 3 birthday 02 m2p C Documents and Setti Fel 4 bitthday 03 m2p C C Documents and Setti MPEG Station MPEG Station S U I 0 f ct 0 ct 0 5 54 N SS MPEG Station Changing the list order The sequence in which files are played back can be changed using the move buttons Up and Down 1 With the mouse select the file you want to change the order E 4 birthday 03 m2p C C Documents and Setti Play List Nu Name Folder name E 1 birthday 01 m2p O C Documents and Setti Fe 2 birthday 02m2p C Documents and Setti Fel 3 birthday 03 m2p 7j C Documents and Setti m2p fist Documents and Seti MPEG Station Assigning playback options The following settings can be made during playback as necessary Playback parameter settings Click on the options button and select Playback parameter settings The box shown below will appear to allow the setting of playback parameters Playback parameter settings Show the last frame at stop None f Fel Use tive tier eShow the last fram
58. hat uses the information from both the forward images in time and the backward images in time to record images by reproducing them from a small amount of data If IBBP is selected all the methods described above are used to maintain picture quality with a small amount of data Standard MPEG is recorded with this format Please select and use this in most instances However using information from forward and backward im ages in this format does not allow uncoupling during data com pression and connection to data in another section In other words it is difficult to edit recorded images x ipu ddwy If you select frame all frames will be recorded as picture I frame only so that editing will be easy You have software that can edit frame MPEG files and if you want to use it try frame However this format requires a much larger volume of data that IBBP does in order to maintain the same level of picture quality Maximum bit rate is limited to 15Mbps the MP ML regulation and that limits any attempt to use large amounts of data to obtain high picture quality Appendix Number of pictures As stated above MPEG video data contains picture at a ratio of one to several frame at a ratio of one frame to several frames and that number of frames is specified Following the one pic ture are the B and P pictures all organized into one group which is called a GOP In other words the number of pictures is the number of
59. ia devica cect oo A apadi N cme 21 g System Setup 3 Check Specify a location and click Next Locate Driver Files Where do you want Windows to search for driver files 4 Insert the CD ROM set D MVA D2000 driver D is the location of your cd rom drive and click OK Found New Hardware Wizard xj qv CEN eso D MVR D2000 driver 5 Confirm that the model name is MVR D2000 Series Kernel Mode Driver and click Next Diiver Files Search Results The wizard has finished searching for driver files for your hardware device System Setup If Digital Signature Not Found dialog will appears during setup Click Yes System Setup SS 6 Click Finish Found New Hardware Wizard Completing the Found New Hardware Wizard 9 MVR D2000 Series Kemel Mode Driver Windows has finished instaling the software for this device The hardware you installed will not work until you restart your computer To close this wizard click Finish eh gt ence 7 When they prompt you to reboot click Yes System Settings Change You must restart your computer before the new settings will take effect Do you want to restart your computer now 73 w dnaes weashks U System Setup Windows XP Windows Server 2003 Installation To install the drivers you will need to log on as a user with admin
60. ick here to jump to the Canopus Homepage MPEG Station Version info Click here to display the version info MPEG Station NS Playback mode ORCE MPEG Station JO G5 Payback Mode M gt 4 gt o 1 D EO Files Ho oi me Stop 99 99 EG 7 Ey H z e Soe EE apa Il C soem e The following dialog box will appear when you right click on the interface Combine Web information 7 About MPEG Station 1 Close Closes MPEG Station 2 Homepage Click here to jump to the Canopus Homepage 3 Version info Click here to display the version info 4 4 Icon Click here to minimize this application a 5 Capture mode Click here to switch to Capture mode in 6 Playback mode Click here to switch to Playback mode o 7 Overlay button When the preview button is pressed D the overlay will turn on off toggle E 8 Information display Displays the file information 9 Playback slider Drag the marker to change the play back location m 10 Pause Pause playback 11 Previous file Jump to the previous file in program playback mode 12 Playback Start playback MPEG Station 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 N
61. ictures are taken The TV cathode ray tube input voltage and display luminosity are not proportional so to main tain the curved line relationship inverse characteristics are given throughout picture taking and that corrects the luminosity of the cathode ray tube display Thus RGB signal values obtained from video signals are not proportional to the brightness To make these values express brightness accurately the conver sion must be made with the same characteristics as the char acteristics of the cathode ray tube These characteristics are determined by the numeric values known as gamma values and the gamma value for cathode ray tube characteristics is 2 2 Thus by performing a gamma value 2 2 conversion of RGB values will be obtained that are proportional to the brightness of the picture subject However because computers and their printers do not have linear display characteristics the picture viewed on them will not appear natural when the RGB values obtained are displayed on a PC screen or printed out on a printer Specifically if no gamma conversion is made during the saving of still pictures because the gamma correction for TV will re main without modification the bit map data obtained will have sections of intermediate brightness appearing too bright or appearing whitish However when converted at the 2 2 gamma value the inter mediate brightness sections appear too dark or even black In other words we must gamma
62. iles Dragging multiple files for conversion to the Use File List adds them to the list Clicking on CONV batch converts the files Ti DV MPEG File Converter jwada hiDes E 29 713 392 byte Minimize O Maximize P X Close Alt F4 End Frame Execute MvrProp exe sample 158 254854 sample About CDV2MPEG File list Close Del Clear Play conv Video File Name This is what the window looks like when the button is clicked This window is for explanation purposes and is different from the window that will actually be displayed DV MIPEG File Converter DV MPEG File Converter m U lt 4 U m T 0 Q J z J ct 0 J g Double clicking on the start frame and end frame s preview window displays the frame list Clicking on either the or the button moves the display frame either backward or for ward Left clicking on the window in the list allows frames to be specified Start Frame End Frame 44 oa7o sample 159 254 654 sample Frame Number 39 49 Right clicking on the start frame s and end frame s preview window captures the frame Selecting Copy bitmap transfers the frame screen capture to the clipboard Selecting Save bitmap allows the frame s screen capture to be saved as a file Left dragging on the preview window and dropping it on the desktop is another way to save the frame screen capture as a file In this case how
63. ime shift and a remaining 242 lines are carrying images with a 1 60 second time shift Put those together and you have a configuration with 30 frames per second but with that image every other line has a 1 60th of a second time shift forward and backward and each of those comprises a field Field order for two types of MPEG files Because full D1 and half D1 size MPEG2 record 480 pixel video vertical they extract just 480 scanning lines from 483 scanning lines and record Because of that strictly speaking MPEG2 can not effectively record all video signals and only part of them will be recorded When that happens MPEG2 has no rules as to which scanning lines will be abandoned and which 480 will be recorded so that allows room to make a selection There are two ways in which the scanning lines are selected either the topmost line when rowed in frames is the line that belongs to the field that was taken first or the topmost line is the line that belongs to the field that was taken afterwards The two are distinguished by calling the former top field first and the latter bottom field first This distinction is known as field order MPEG2 has information recorded in it to tell whether or not the field order is top field first Packaging the MPEG2 file with the encoder that created it gives the frame configuration of an interlaced MPEG2 file those two types of field order Encoding in SIF size causes all fields to be erased on one side so
64. ions can be selected Audio signal encoding is based on MPEG audio ISO IEC 11172 3 specifications Audio is recorded in uncompressed PCM data Encoded video or audio data is called an elementary stream The MVR D2200V creates files in which either or both video and audio are encoded and the elementary stream recorded Organizing video and audio signals into one data set is conve nient when they are simultaneously recorded To do that the video elementary stream and the audio elementary stream can be multiplexed into one stream The multiplexing format for video MPEG1 is system stream ISO IEC 11172 1 and for video MPEG2 it is program stream and transport stream both are ISO IEC 13818 1 and each one has its specifications Either system stream or program stream can be created Video CD Since the purpose of Video CD is to record both audio and video it records in the system stream format Video CD uses MPEG1 video Thus when MVR D2200V encoded data is used as a video element to create Video CDs it encodes as system stream However Video CD specifications limit conditions to a narrower range than the general MPEG1 system stream and because of the slight differences in those specifications a Video CD se lection button has been set up separately in the MVR D2200V to allow output of a system stream fitting those conditions Thus reading file output into a Video CD creation software available on the open market allows you to cre
65. llation n ere eI teeco ttes na eise eta kei es cea aea ER ek us 26 Adobe Reader 6 0 Installation eerte rra ntr enki nna 29 Uninstallati on e 31 MVR D2000 Properties eee Dee eessecc esie nre Peek ese ce ERE RR SR tine 32 How to open the properties dialog esessesssssssseseeeneennen nnns 32 Property Settings nuce ct em E Ex E uce AF AE IE YES ROS RR EE FE eR od re A 32 Chapter X9 oo1x4aa4343 052 XXE bd d HAUTE UEA dd dodubad x EUR RS 35 MPEG Station siiicar stad sssctevcveseesesiesceceveresaesacssectened cette iaaa 35 About MPEG Station tetti etri deseen ee een dene aa eene nna esi n 36 Howto launch MPEG Station issivscecssssccsscaccesscatecssenacedbecsscieeteceasseaetistendectheasteacersoeaestseais 36 Program Interface i5 case cectasesdeseszsazancievacsatecatescensccadecstsvecdadeadeeaetssacaten scdestiatecsonzaceetensa 36 Capturing VideO C ER 40 Basic ODerdtlOTiz eu a aaa Ea aca dacees esses E EEE 40 Monitoring Video and Audio eite re retenti tiras iut n km k re repa naa eek eea ih 41 Video encode parameter settings csecccecccencescereseeessceeeseseeneeeneseeeenesseesenesaneseeesetseeees 43 Video processing parameter settings eeesseeeenneneneneenen nennen 47 dre E 50 Standard play back qu 50 Programplayback xni SAUBER EI RUE sui 51 Editing the play Ilst iii re eet tede it p d
66. lt Back J Newt gt If the following dialog appears click Continue Anyway Hardware Installation The software you are instaling for this hardware MVR D2000 Series Kemel Mode Driver has not passed dos Logo testing over is compeity with Windows XP Tell me why this testing is important Esta eo A E ET or destabilize the correct operation either immediately or in the future Victo reno yexmaonde Wis veu ston Us metadata sed contact the hardware vendor for software that has passed Windows Logo testing Continue Anyway STOP instalation System Setup 7 Click Finish Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for 9 MVR D2000 Series Kemel Mode Driver The hardware you installed will not work until you restart your computer Click Finish to close the wizard 8 When they prompt you to reboot click Yes WE o ser ea Do yeu want torestart your computer now x System Setup System Setup SS dnaes weashks 3 Click Next Software Installation To install software in Windows 2000 XP Server 2000 2003 Server you will need to log on as a user with administrator privilege 1 Insert the CD ROM 2 Setup application will run automatically If the program does not run please start the setup manually from the CD ROM MVR D2000 Setup Welcome to the InstallShield Wizard f
67. n even numbered fields If field order is not set cor rectly the horizontally moving sections of an output MPEG2 file s video image will wobble during play quite marked when viewed on a television set If the topmost line is an odd numbered field Top Field First Specify Upper Field First If the topmost line is an even numbered field Bottom Field First Specify Lower Field First If the original video file is in Canopus DV format or Canopus Motion JPEG format the topmost line will be an even num bered field so specify Lower Field First If the original video field does not have a field structure such as when it has MPEG1 files or AVI field with a vertical resolu tion of 240 or less specify Upper Field First oO MP MVR D2200V MEME A 2 77757 7 mm Chapter 6 Online Manual This section explains how to use the online manual which was written to show you how to use the MVR Series Development Kit How to Use the Online Manual Online Manual SS 8 J D lt D J C D O How to Use the Online Manual The online manual explains how to use the MVR Series Develop ment Kit Don t use the MVR Series Development Kit until you have read and thoroughly understood the online manual Before starting the online manual The online manual is a pdf format file and you will need Adobe Reader 6 0 to read it If you don t have Adobe Reader 6 0 installed read the instr
68. o pus or an authorized Canopus agent This warranty applies only to the original purchaser of the Canopus product and is not transferable Canopus Co Ltd warrants that for this period the product will be in good working order Should our product fail to be in good working order Canopus will at its option repair or replace it at no addi tional charge provided that the product has not been subjected to misuse abuse or non Canopus authorized alterations modifications and or repair Proof of purchase is required to validate your warranty Canopus Co Ltd has gone to considerable effort to make the user manual as accurate as possible at the time of printing Canopus cannot assume however any responsibility for any inac curacies that may be contained in the manual In no event will Canopus Co Ltd be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in the manual even if advised of the possibility of such damages As part of their ongoing process of continued product development Canopus Co Ltd reserves the right to make improvements in the manual and the products it describes at any time without notice or obligation CANOPUS CO LTD IS NOT RESPONSIBLE FOR ANY LOST PROFITS LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT THIS INCLUDES DAMAGE TO PROPERTY AND TO THE EXTENT PERMIT TED BY LAW DAMAGES FOR PE
69. o will be displayed in interlace mode A frame is divided into two fields and each field will be drawn one after the other making the frame change by two scan processes 2 Flipping Check this option to prevent tearing You can prevent the part of the image from being redrawn before the completion of the previous drawing process 3 Progressive Redraws Odd and Even fields of the screen every 1 60 second interpolates the field image before displaying This option does not work for non interlaced video MPEG1 and MPEG2 of SIF size 4 Brightness Adjust the brightness of the input pic ture The higher the value the brighter the picture Minimum and maximum values differs accord ing to the enviroment 5 Contrast Adjust the contrast of input video The higher the value the higher the contrast If the value is at the minimum that is a state in which there is no luminosity component for determining contrast Minimum and maximum values differs accord ing to the enviroment 6 Saturation Adjust the color density of the input video The higher value the denser the color If the value is at the minimum that is a state in which there is no color component white and black state Minimum and maximum values differs accord ing to the enviroment uomeas 93AN g MPEG Station 7 Initialize with the saved value
70. or MVR D2000 The InctallShielde Wizard wil install MVF D2000 on your computer To continue click Next 4 The License Agreement is shown Read carefully and click Yes if you accept it If you click No the installation is aborted MVR D2000 Setup License Agreement Please reed the folloving license agreement carefull Press the PAGE DOWN key to see the rest of the agreement CANOPUS END USER LICENSE AGREEMENT IMPORTANT READ CAREFULLY This Software End User License Agreement EULA either an individual or a single entity and Canopus Co oduct s identified above which may include printed materials copy protection devices and online or electronic documentation collectively SOFTWARE By installing copying or otherwise using the SOFTWARE you agree to be bound by the terms ol this EULA If you do not agree to the Sean ey install or use the SOFTWARE You may within 30 days of purchase of a copy of the SOFTWARE retum the entire copy of SOFTWARE a Do you accept all the terms of the preceding License Agreement If you choose No the setup will close To install MVF D2000 you must accept this agreement 7 Click Next MVR D2000 Setup Choose Destination Location Select folder where Setup will install files Setup will install MVR D2000 in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder j Destination Folder
71. re quality but that will also make the file size bigger The coding format for video data will be either CBR or VBR The maximum bit rate in 400 bit units can be set only when VBR is selected GOP Pattern GOP pattern can be assigned as either Flame GOP configured from only one picture or IBBP GOP configured from three pictures B and P and the following parameters can also be assigned Picture The number of pictures contained in a GOP can be set in a range from 1 to 30 If Flame is selected then the number of pictures is fixed at 1 Interval The cycle in which or P pictures will appear is assigned in a range from 1 to 3 If Flame is selected then the number of cycles is fixed at 1 DV MIPEG File Converter DV MPEG File Converter m GOPs for streaming can be assigned if the audio sampling rate is 48000Hz If this is set the collection of packs that store one GOP of video data and the audio data that accompanies are regarded as one unit A GOP completes with in the unit Unavailable MPEG1 conversion Closed GOPs Assigns the Closed GOP flag that shows that the video in a GOP is independent from other GOPs Profile amp Level Specifies the profile and the level Unavailable for MPEG1 conversion Image Size Specifies the size of image in the capture file Unavailable for MPEG1 conversion After completing the settings click on Next 7 Specify the audio data settings
72. reduction used in the MVR D2200V detects noise from noise characteristics low association on the time axis so that effects on the picture are held down to the very minimum Reducing noise which is the big enemy in MPEG compression contributes to the improve ment of compression rate Structural limitations prevent the elimination of all noise Digital 3D frame synchronizer The characteristics of the MPEG encoder chip create prob lems in that it may be unable to continue processing if the input sync signal is distorted due to noise or other factors To solve this problem a one screen memory is used as a buffer so that even if a sync signal in the input signal is distorted the MPEG encoder chip will always be supplied with stable sync signals and the possibilities of processing interruption are greatly suppressed There is no synchronization function for external signals external sync input The digital 3D frame synchronizer is always in ON state Digital line time base corrector gt This detects images that have strong jitter in the horizontal U direction and forcibly corrects it It is also very powerful in n capturing old video libraries J There may be times when the quality of the signal will prevent Q correction x The digital line time base corrector is always in ON state Jj 06 Appendix Troubleshooting The MVR D2200V may not operate correctly at times There are many different ca
73. remiere Plug in install the Premiere before setting up the MVR D2200V For the explanation of the assignment window for MPEG parameters see the paragraphs on DV MPEG File Converter and MPEG Station How to Operate Movie Compiler Module 1 After editing select the location you want to output and then select File Export Canopus MPEG Encoder E Edt Project cip Sequence ma New Open Project CHO Open Recent Project gt Close Cile Save Ces Save As Ctrleshift s Savea Copy Ctrl AR S Revert F Import Ctrl I Import Recent File gt Movie Corbett C Propavlles Pi Frame Ctrieshift M PYRYN Audo CtlealeeShifte M Adobe Media Encoder BR iue Export To D 2 Set the parameters in the same manner as the DV MPEG Converter See page 70 O MPEG1 System Stream 1 O MPEGI Elementary Stream 2 MPEG Progiam Stream 3 O MPEG Elementary Stream 4 Video CD C Defaut Premiere Plug in Premiere Plug in Premiere Plug in TN U 1 o j D J 0 T T Q z Select File Export Canopus MPEG Encoder and in the en coder setting sequence specify the field order according to the one used in the source Rendering Options Export Range m Entire Sequence v Field order indicates that the topmost line when viewing video in frame units is either an odd numbered line divided into fields or a line withi
74. rgets for an optimum balance between data volume and picture quality are given here Picture size of 720 x 480 720 x 576 for PAL 6 12Mbps is optimum At 4Mbps there will be a slight dete rioration in picture quality Increasing to more than 8M will not yield that great an improvement in picture quality 15Mbps is the upper limit for MPEG2 MP ML specs Picture size of 352 x 240 352 x 288 for PAL 1 5 to 1 8 Mbps is optimum for MPEG1 1 8Mbps is the up per limit for MPEG1 specifications In Video CD specs 1 152Mbps is the upper limit so that if Video CD is selected that value will be fixed If this picture size is used for MPEG2 2 to 3 Mbps is opti mum To raise the bit rate further for improved picture quality use 352 x 480 352 x 576 for PAL xipusddvy Picture size of 352 x 480 352 x 576 for PAL 3 to 4 Mbps is optimum To raise the bit rate further for improved picture quality use 720 x 480 720 x 576 for PAL Video bit rate J 60000005 bps 12000000 tps Mey CBR is the abbreviation for constant bit rate which holds video data quantities at almost a fixed level VBR is the abbreviation for variable bit rate and it allows the quantity of video data to change MPEG has the property of being difficult to compress when a scene changes quickly or the picture contains a large amount of finely detailed patterns In those situations CBR will attempt to compress the data to a certain fixed le
75. s cannot be assigned Files will automatically be created in which just the source file name s extender is changed Output The display window will differ according to the format of the file to be converted Video When you convert file s either to MPEG1 elementary stream or MPEG2 elementary stream you can type the name for the output file including the path name in this field The Drive and Browse buttons will be available Audio When you convert file s either to MPEG1 elementary stream or MPEG2 elementary stream you can type the name for the output file including the path name in this field The Drive and Browse buttons will be available MPEG When you convert file s either to MPEG1 system stream MPEG2 program stream or Video CD you can type the name for the output file including the path name in this field The Drive and Folder buttons will be available Folder If Set same output folder for both streams is checked you can specify the folder to store the generated files The Drive and Folder buttons will be available Preview Check this option to enable the preview windor during conversion operation 9 Click Convert gt Starts file conversion i 561235 M 115 200 376 376 Estimated time 00 00 14 10 File conversion ends when the following dialog appears gt gt To play converted files click on the Play button gt gt
76. t After editing is complete click on OK to close the play list and return to the MPEG Station To cancel the changes click on Cancel The MPEG Station cannot be operated while the play list is open Edit Program Ei 2 birthday 02m2p gt C Documents and Setti 00332 1 3 bithday 03m2p C C Documents and Seti 00332 1 Registering files Click on Add The following window will appear so select the files to be registered in the list and click on Open The registered files will be given numbers in order starting with 1 at the top Multiple files can be selected using the Ctrl key Playback file settings Look jn Videos z e amp ier E8 beni mep birthd p Fp birthday 03 m2p Fp birthday 04 m2p Filename birthday 1 m2p Files of type Program Stream File m2p bel Deleting registered files With the mouse select the file to be deleted and then click on Delete To delete all files click on Delete All Inserting files Files can be inserted at any position in the play list In this example a file is inserted between the files numbered 1 and 2 1 Use the mouse to select file number 2 Edit Program 2 Click on Insert The following window will appear so select the files to be registered in the list and click on Open Multiple files can be selected using the Ctrl key Playback file settings Look jn E Videos e c
77. there is no interlacing That means that there is no such distinction of field order with SIF MPEG2 files Each frame is processed progressively UM Append Field order X I C O lt Appendix NS When do we need to be aware of differences in field order In normal MPEG file playback the MPEG decoder automatically discriminates between differences in field order and based on that changes the video signal configuration sequence So the user does not have to pay any attention to field order However when reading and editing the created MPEG file with video editing software the video editing software may require that different settings be made because of the file s field order With systems that continuously play multiple MPEG files with no break it may be necessary to make the field order the same for all files If that is necessary the user must already know the created file s field order or must specify and create a field or der when creating the MPEG file Field order of MPEG2 files created in the MVR D2200V The field order of MPEG2 files created in the MVR D2200V dif fers with captured video and with conversion from AVI files using the DV MPEG file converter When capturing video signals and creating MPEG2 files se lect either capture by top field first or capture by bottom field first MPEG2 files created by conversion from DV AVI files will al ways be bottom field first DV format vid
78. tion which can be determined by turning the equipment off and on the user is encouraged to try and correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is con nected Consult the dealer or an experienced radio TV technician for help This equipment has been certified to comply with the limits for a class B computing device pursu ant to FCC Rules In order to maintain compliance with FCC regulations shielded cables must be used with this equipment Operation with nonapproved equipment or unshielded cables is likely to result in interference to radio and TV reception The user is cautioned that changes and modifica tions made to the equipment without the approval of manufacturer could void the user s authority to operate this equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two condi tions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation a Notices and Warranties Warranty Your MVR D2200V hardware options are covered by a limited warranty when you register your Canopus product This warranty is for a period of three years from the date of purchase from Can
79. to exit the wizard n lt ct 0 3 ty 0 ct C 1 System Setup Uninstallation To uninstall software in Windows 2000 XP server 2000 2003 Server you will need to log on as a user with administrator privilege 1 From Start menu go to Control Panel and select Add Remove Programs 2 Click MVR D2000 and click Change Remove 3 Choose Remove and click Next Welcome Modify repair or remove the program Welcome to the MVB D2000 Setup Maintenance program This program lets you modify the current installation Click one of the options below C Modiy B Select new program features to add or select curenti instaled features to remove C Repair 8 Reinstall all program features installed by the previous setup Benovg Remove al installed features eta ees 4 A confirmation message will appear Click OK Confirm Uninstall 5 Click Finish Maintenance Complete InstallShield Wizard hae finished performing maintenance operations on MVR D2000 System Setup n System Setup SS MVR D2000 Properties How to open the properties dialog From Start Menu go to All Programs Programs for windows 2000 MVR D2000 and select MVR D2000 Property z MVR D2000 Properties Device Power Management Property Settings i 1 In the Device tab click Property Info 7 MVR D2000 Properties If you are
80. tting will not change the capture quality SCRE Hl bi j 40 mIU L oxssbw J C Ona I Record Fon HOR COI gt 1 Brightness Adjust the brightness of the input picture Zero 0 is the darkest state and 99 is the brightest state The higher the value the higher the luminosity the lower the value the lower the luminosity 2 Contrast Adjust the input picture s contrast The higher the value the higher the con trast When the value is 0 there is no luminosity component to determined contrast 3 Saturation Adjust the density of color in the input pic ture The higher the value the greater the density of the color When the color is 0 there is no color component black and white state 4 Default Return to the default setting 5 OK Apply the settings and return to the main screen uomnea3G8 DAdWN 6 Cancel Returns to the main screen without nnd applying changes U Audio monitoring You can monitor the input audio as below 1 Monitoring on speaker Connect the audio output to a speaker with amplifier DO NOT connect a headphone to the audio output connector 2 Monitoring through soundcard Connect the audio output to the line in connector of your sound card Video encode parameter settings You can set the capture parameters as below
81. uctions Adobe Reader 6 0 Installation on p 29 of this manual before starting the online manual Starting the online manual Insert the MVR 2200V Installation CD into the CD ROM drive open the CD ROM drive from the computer open MVR D2000 folder Manual folder and then double click on Sdk_manual_e pdf Install onto the hard drive The online manual can also be used by copying it onto the hard disk drive Follow these steps to make such a copy 1 Use the Windows Explorer to create a new folder on the hard disk drive Specify any drive or folder name desired for the folder to be created 2 Insert the MVR D2200V Installation CD into the CD ROM drive open MVR D2000 folder Manual folder and copy the Sdk_manual_e pdf into the file created in Step 1 To start the online manual after installation open the relevant folder from the Windows Explorer and then double click on Sdk manual e pdf How to operate Adobe Reader 6 0 Select the Adobe Reader Help from Adobe Reader 6 0 s Help to start up the Adobe Reader 6 0 s online guide To understand how to operate the Adobe Reader 6 0 please read this online guide oO MP MVR D220V Appendix Explanation and Analysis of MVR D2200VY Programming Parameters Explanation and Analysis of MVR D2200V Programming Parameters Troubleshooting Hardware Specifications Appendix Explanation and Analysis of MVR D2200V Programming P
82. uses for incorrect operation Before calling Technical Support check to see if a similar case may have oc curred and is reported in Troubleshooting Q Input image does not appear Cause 1 Remedy 1 Cause 2 Remedy 2 Cause 3 Remedy 3 Preview display is disabled Click on the preview button to enable the pre view display Wrong settings for video input terminals Use the MPEG Station source switching button to switch input terminals Video device not outputting images Change the settings on the video device so that it will output images from the video device that is the input source Q Input image is not overlay displayed Cause 1 Remedy 1 Cause 2 Remedy 2 Cause 3 Remedy 3 Preview display and overlay display are not en abled Preview display is not enabled Click on the preview button and the overlay but ton to enable the preview display and the over lay display Using Windows at a resolution or frequency that cannot handle overlay display Refer to the operational manual for the graphics board you are using and change the frequency and resolution to ones that can handle overly display The capture parameter s MPEG tab stream is on audio The overlay will not display if audio is selected Select something other than Audio from Stream which is in the Assign capture param eters dialog box X I C O lt Appendix NS Q Input image is not video output C
83. vel and the picture quality will deteriorate to a certain extent compared to other scenes To ameliorate that VBR allows the data volume result ing from compression to be larger than average in scenes like the one described while in other scenes it decreases the amount of data from the average This format is based on the idea of maintaining picture quality in all scenes to as uniform a level as possible without increasing total data quantity This means that VBR allows two settings the bit rate mean target bit rate and the maximum bit rate does not exceed up per limit even when data quantity increases Appendix CBR and VBR Appendix Appendix NS GOP Pattern I Frame and IBBP Video images often undergo slight changes with the passage of time MPEG makes use of that fact and if there is a part within forward or backward frames that resembles that image it uses that information so that all data will not be recorded as is Thus an image cannot be structured if there are no previous images However even if there is no information from forward or back ward images images are contained that can be independently reproduced at the proportion of one frame to any other frame This is called picture In contrast to this there is what is called P picture that uses information from the forward image in time to record images so that they can be reproduced from a small amount of data There is also B picture t
84. ws CE USB Devices Mes Cancel System Setup System Setup SS dnaes weashks 4 Click Have Disk Found New Hardware Wizard Select the device driver you want to install for this hardware Select the manufacturer and model of your hardware device and then click Next Im have a disk that contains the driver you want to install click Have Disk Manufacturer Model G Jf Game port for CH Products Gamecard 3 ESS Technology Ine ThrustMaster E This chiver is digitally signed Have Disk Tellme why driver signing is important Nee 5 Insert the CD ROM and click Browse set to D MVA D2000 driver D is the location of your cd rom drive and click OK Install From Disk Insert the manufacturer s installation disk and then make sure that the correct drive is selected below Copy manufacturer s files from DAMVP D2000 driver 6 Confirm that the model name is MVR D2000 Series Kernel Mode Driver and click Next Found New Hardware Wizard Select the device driver you want to install for this hardware Select the manufacturer and model of your hardware device and then click Next If you have a disk that contains the driver you want to install click Have Disk Show compatible hardware Model MVR D2000 Series Kemel Mode Driver A This driver is not digitally signed 1 5 antes

MVR-D2200V User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents