Home

HDMI® 1.3 to 3GSDI Scaler

image

Contents

1. Patterns Color Bars Displays color bar video pattern Cross Hatch Displays cross hatch video pattern General Language Sets the menu to display English or French text Save Config Restore Default Config Remote Channel FPGA Version Firmware Version Configuration Version Note on Genlock Operations When the refresh rate of the source device connected to the genlock input and the refresh rate of the 3G SDI output device equal or a multiple of the output device s refresh rate the Scaler will automatically genlock them For example an output refresh rate of 60Hz will be genlocked with input refresh rates of 30Hz 60Hz and 50Hz but not with 59 94Hz Genlock synchronization is performed each time the input and output devices are changed Recognized Reference input formats are 10801 50 59 60 720p50 59 60 480i NTSC and 576i PAL 10 SUPPORTED INPUT RESOLUTIONS Note Since the scaler processor VXP is 10 bit all 12 bit input formats will be truncated to 10 bits 8 bit input will be dithered to 10 bit Bit Sup Rate Type Resolution Frame Rate Color Space Depth ported YCbCr 4 2 2 480i 8 480p 59 94 Video 777 YCbCr 4 4 4 8 10 Yes Ll RGB 4 4 4 1080i 50 50M 59 94 60 YCbCr 4 4 4 ve 1035i 59 94 60 RGB 4 4 4 1080p 23 98 24 25 29 97 30 1080p 50 50M 59 94 60 10 12 2K 23 97 24 YCbCr 4 4 4 RGB 4 4 4 Deep Color 720 23 97 24 25 29 97 30 50 59 94 60 Video 640x400
2. RS 232 Controller EXT HDMI 1 3 2 3G DI IR REMOTE CONTROL UNIT DESCRIPTION RMT 8HDS IR 2 7 3 6 4 5 Up Navigates cursor UP in the Menu System Left Navigates cursor LEFT in the Menu System Down Navigates cursor DOWN in the Menu System Source Not used Output Cycles through the following output modes 480i 576i 720p 10801 Menu Show Hide the Menu System Right Navigates cursor RIGHT in the Menu System IR REMOTE CONTROL UNIT INSTALLATION 1 Remove battery cover from the back of the RMT 8HDS IR remote 2 Verify that DIP switches 1 and 2 are in the down OFF position 3 Insert the battery hold the battery so that you can see the positive side facing up The side that is not marked must be facing down 4 Test the RMT 8HDS IR remote by pressing ONLY one button at a time indicator light on the remote will flash once each time you press a button WARN ING Do not press multiple buttons simultaneously and do NOT press buttons rapidly These actions will cause the remote to reset and steps 1 4 will have to be repeated Note The RMT 8HDS IR ships with two batteries One battery is required for operation the second battery is complimentary The following are the DIP switch combinations that correspond to the Remote Code menu option on the HDMI 1 3 to 3GSD Scaler see Menu Functions sec tion for more information Remote Channel 0 Remote Channel 1 Remote Channel 2 Remote Cha
3. 85 RGB 4 4 4 Yes 640x480 60 640x480 75 640x480 85 800x600 60 800x600 75 1024x768 60 1024x768 75 1024x768 85 1280x854 1152x864 75 1280x768 60 Graph 1280x960 60 5 1280x960 85 10 12 1280x1024 60 YCbCr 4 4 4 1280x1024 85 Color 1360x768 60 1366x768 60 1366x923 50 1440x900 60 1440x1080 60 1600x1024 1600x1200 60 1680x1050 60 1920x1200 60 2048x1080 11 SUPPORTED OUTPUT RESOLUTIONS SDI Output Formats Supported are shown in the following table Rate Dual Link Interlaced SD HD HD Dual Link HD 4 4 4 Dual Link 1080p 3G Level A 3G Level B Color Resolution Frame Rate Space Video Video 720p 23 97 24 25 29 97 30 50 59 94 60 1080i 50 50M 59 94 60 1035i 59 94 60 1080p 23 98 24 25 29 97 30 1080sf 23 98 24 25 29 97 30 2K p 23 97 24 2K sf 23 97 24 Video 720p 23 97 24 25 29 97 30 50 59 94 60 1080i 50 50M 59 94 60 1035i 59 94 60 1080p 23 98 24 25 29 97 30 1080sf 23 98 24 25 29 97 30 2K p 23 97 24 2K sf 23 97 24 Video 1080 50 50 59 94 60 Video 1080 50 50 59 94 60 PCT Video 1080 50 50 59 94 60 Video 12 Bit Depth 8 10 8 10 8 10 8 10 8 10 8 10 8 10 Support Yes Yes Yes Yes Yes Yes Yes 5 232 5 INTERFACE 04321 9876 Oniy Pins 2 RX 3 and 5 Ground are used on the RS 232 serial
4. Er Geren HDMI 1 3 to J3GSDI Scaler EXT HDMI1 3 2 3GSDIS User Manual MIA ww gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday Pacific Time VVrite To Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefen com support 2gefen com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice HDMI 1 3 to 3GSDI Scaler is a trademark of Gefen LLC HDMI the vom 1 3 logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries 2011 Gefen LLC All Rights Reserved All trademarks are the property of their respective owners Rev Ad TABLE OF CONTENTS Introduction Operation Notes Features Panel Layout Panel Descriptions Connecting and Operating the HDMI 1 3 to 3GSDI Scaler IR Remote Control Unit Description IR Remote Control Unit Installation Menu Functions Supported Input Resolutions oupported Output Resolutions HS 232 Interface Firmware Update Procedure specifications Warranty INTRODUCTION Congratulations on your purchase of the HDMI 1 3 to 3GSDI Scaler Your com plete satisfaction is very important to us Gefen Gefen delivers innovativ
5. by default Signal can be forced to a specific High definition resolution Please see Supported Input Output Resolutions for more info Clean Aperture Horizontal and Vertical Size Stretch image Left Right or Up Down Horiz and Vertical Position Move image in viewport Left Right or Up Down MENU FUNCTIONS o Remote Channel Changes the IR code of the HDMI to 3GSDI Scaler to one Of 4 different settings betvveen 0 and 3 VVhen the remote channel is changed svvitches in the 8 remote must be changed to the corresponding codes in order to continue operating the Scaler Please see the Installation page for the RMT 8HDS IR remote control for more information Non Standard Sync Allows the unit to sync with non standard video formats e Mode Enable Disable Output e Video Output Format Select the desired HD output resolution See pages 11 12 for more information e Audio Output Format The built in S PDIF coaxial connector outputs the first 2 channels of Audio Group 1 PCM bitstream 8 channels and compressed audio formats using the first 2 ch of Audio Group 1 Link Configuration When using dual link SDI HDSDI input allows you to select either YCbPr or RGB When using 3GSDI selects A or B 4 2 2 only e Genlock e Off Free run mode e Video Input Locks the input clock in sync with the output clock e Reference Input Locks the output clock with the Reference clock
6. e progressive computer and electronics add on solutions that harness integration extension distribution and conversion technologies Gefen s reliable plug and play products supplement cross platform computer systems professional audio video environments and HDTV systems of all sizes with hard working solutions that are easy to implement and simple to operate The Gefen HDMI 1 3 to 3GSDI Scaler The Gefen HDMI 1 3 to 3GSDI Scaler outputs an HDMI signal as SDI HD SDI or 3G SDI with resolutions supported up to 1080p 60 Hz and 2K 2048x1080 60 on two SDI output connectors along with dual link HD SDI HDMl embedded audio is supported at up to 7 1 channels An advanced chipset enables features such as Genlock Color amp Gamma Cor rection Noise Reduction Detail Enhancement Aspect Ratio Selection Pattern Generator Mode and Multiple Languages through on screen display OSD Menu Support The genlock reference input provides the capability of syncing the unit with the customer s house signal How It Works Connect an HDMI source to the input and a 3G SDI display to the output Power up the device and video signals are automatically converted to the proper format enabling the conversion and scaling to take place OPERATION NOTES READ THESE NOTES BEFORE INSTALLINC OR OPERATING THE HDMI 1 3 TO 3GSDI SCALER Upon power up the HDMI 1 3 to 3GSDI Scaler will automatically detect the input format of the input The unit is controlled us
7. ing the included remote e following are the buttons for the RMT 8HDS IR UP Navigates cursor up LEFT Navigates cursor left ENTER Accept Operation Return to Menu RIGHT Navigates cursor right DOWN Navigates cursor down MENU Show Hide Onscreen Display OUTPUT Change Output Format SOURCE Non operational bring up the on screen menu press the MENU button Navigation is done using Buttons up left right and down Push the ENTER button to ac cept the cursor focus e Pressing the Output button cycles through the following output modes 480i 576i 720p 10801 e Other functions and output modes can be accessed through the onscreen menu To Restore settings simply recycle power on the Scaler Note Both DIP switches under the remote battery cover must initially be in the OFF position to communicate with the Scaler FEATURES 1 3 Features Supported e 225 MHz Video Bandwidth e 10 bit Deep Color e XVYCC Upto8 channels of PCM audio embedded into HDMI Dolby Digital DTS encoded audio Features e 10 0 resolution for greater precision and dynamic range Proprietary motion adaptive video de interlacing with edge interpolation for SD HD formats Supports 8 channels of SDI audio e Advanced noise reduction and detail enhancement Fully integrated sprite based multi plane OSD controller Frame rate conversion to from any refre
8. interface RS232 Settings 5112 DO SOCON E 19200 RN 8 wir P None SOP 1 us 20 9 A 13 FIRMVVARE UPDATE PROCEDURE The HDMI1 3 to 3GSDI Scaler can be controlled via IR remote the RS 232 serial port and the USB port For USB control drivers must be installed first The USB port is seen as a virtual COM port inside Windows Firmware updates be performed through the USB port only not the RS 232 port Please visit the download section on our website for firmware updates and information on how to control this unit using RS 232 protocols This web address URL has links to the necessary documents and files http www gefen com kvm support download jsp 14 SPECIFICATIONS DE 1020 5 ii in 225 MHz Output Video 2 3 0 Gbps Maximum Input Hesolutton 2048x1080 Maximum eu ege Le e D 2048x1080 HDMI type A 19 pin female SD HDSDI yi izl E BNC female BUM A Serial RS 232 USB ee 5 DC Power Consumpton 20 watts Max LIhCO i0056 ib 8 25 W x 1 75 H x 7 5 H MONG o 5 Ibs 15 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fai
9. ls because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their Original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject t
10. nnel 3 Aspect Layout Picture Input MENU FUNCTIONS Full Screen Stretches input to fill the Monitor Letter Pillar Box Sets the aspect ratio to fit a letter or pillar box format Panoramic Panoramic Zoom feature Extract Feature to magnify the signal e Exact Size Adjusts signal magnification e Horizontal Vertical Position Moves magnified signal Up Down Through Feature to crop the signal H V Size Horizontally and Vertically contracts or expands the cropping viewport e HIV Position Moves the signal Left Right or Up Down inside the cropping viewport Size and Position e Size Adjusts Horizontal or Vertical resolution e HIV Position Moves image Horizontally or Vertically Image Color Contrast Individually adjusts the contrast for red green and blue e Brightness Individually adjusts the brightness for red green and blue e Black Level Adjusts black levels between 0 default and 100 Gamma Correction e Default Sets Default Gamma settings SRGB Custom Enables Gamma Coefficient menu item as the current Gamma coefficient Gamma Coefficient 0 3 3 0 default set to a value of 1 0 e User Table Detail Enhancement Digital Detail Enhancement enhances the signal e HNoise Threshold Adjusts the amount of noise allowed in detail enhancement Noise Reduction Digitally reduces signal noise Motion Threshold Input Video Format amp Input Graphic Format e Auto Detect
11. o change without notice For the latest warranty coverage information please visit Gefen s Warranty web page at http www gefen com kvm aboutus warranty jsp PRODUCT REGISTRATION Please register your product online by visiting Gefen s web site at http www gefen com kvm Registry Registration jsp 16 Rev Ad ma HDMI 1 3 2 3gsdi S 20600 Nordhoff St Chatsworth 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com 69 amp This product uses UL listed povver supplies
12. sh rate Pattern mode w color bars amp coarse hatch patterns Color correction Input color range can be controlled e Noise Reduction Detail Enhancement e Brightness Adjustment e Gamma Selection e Aspect Ratio Select French English Menu Set e USB upgradeable firmware e Remote control via IR remote control and or RS232 serial port 36501 level A B 4 2 2 color space only Package Includes 1 HDMI 1 3 to 3GSDI Scaler 1 6 ft HDMI cable M M 1 6 ft DB9 Serial Cable M F 1 IR Remote Control Unit 1 5V DC Locking Power Supply 1 Set Rack Ears 1 User Manual PANEL LAYOUT Front Panel Back Panel 10 PANEL DESCRIPTIONS Infrared Eye This receiver will receive commands from the included remote control For proper operation line of sight must be maintained between this receiver and the R remote control 3G SDI Indicator LED This indicator will become active when the output video stream is a 3G SDI signal Power Indicator LED This indicator will become active when power is being supplied to the unit via the included 5V DC power adapter RS 232 Control Port This interface was designed to accept commands from an external control system This port will allow switching commands as configuration operations 5V Locking Power Receptacle This input will accept power via the included locking 5V DC power supply Connect the power supply between this input and an open wall po
13. wer socket USB Input Port This port is used to update firmware For current firmware releases please see the download section at www gefen com Genlock Ref Signal Input Connect Genlock reference signal here This is designed to connect an external clock e g house clock to the unit Coax Digital Audio Output Connect coaxial digital audio output to this port HDMI Input This input will accept a single HDMI type A male cable For acceptable input formats see page 11 3G SDI Output These outputs send converted SD HD 3G SDI audio video to a single SD HD 3G SDI device using a user supplied SDI cable Converted HDMI signals will be output through these SDI ports For a full description of the supported A V formats on this output please page 12 CONNECTING AND THE 1 3 TO 3GSDI SCALER How to Connect the 3GSDI to HDMI 1 3 Scaler Connect the source device to the 1 3 to 3GSDI Scaler using the supplied cable Connect the 3GSDI device to the HDMI 1 3 to 3GSD Scaler using an SDI cable Connect the included 5V DC locking power supply to the HDMI 1 3 to 3GSD Scaler and plug the AC power cord into an available electrical outlet The HDMI 1 3 to 3GSDI Scaler will automatically detect the format of the input signal Wiring Diagram for the Gefen HDMI 1 3 to 3GSDI Scaler COAX DIGITAL CABLE 36 DI CABLE HDMI CABLE R 232 CABLE mum 3G SD Display

Download Pdf Manuals

image

Related Search

Related Contents

User Manual - M100/M105 - Epson America, Inc.  A-61627, User's Guide for the Kodak Scan Station 500  

Copyright © All rights reserved.
Failed to retrieve file