Home

Secura®, Quintix®, Practum® - Laboratory

1. 13 1 12 1 2 5 3 4 4 3 5 T 6 10 7 9 8 Pos Name and Function Pos Name and Function 1 Weighing pan 8 Fastening point for an optional Kensington key lock 2 Shield disk 9 Menu access switch locks various functions and unit when balances are verified 3 Leveling feet 10 USB port for mini AB 4 Touch screen 11 DCjack 5 Level indicator Quintix and Practum models 12 Secura models with readability of 0 1 mg Pan draft shield 6 Manufacturer s ID label and additional plate for 13 Draft shield verified models 7 Lug for attaching antitheft locking device User Manual for Secura Quintix Practum Getting Started Getting Started The balance must be disconnected from the mains power for all assembly work Unpacking and Equipment Supplied Open the packaging making sure to remove all parts carefully After unpacking the device check it immediately for any external damage gt Ifyou detect any damage proceed as directed in the chapter entitled Care and maintenance gt Save the box and all parts of the packaging for any future transport During shipment please do not leave cables plugged in The following parts are included in the equipment supplied Components Balance with Draft Shield Precision Balance
2. There are three ways to connect the balance via USB 1 Connection with a PC via USB cable Mini B for USB A Device Protocol menu option Select the data format for transfer to the PC PC SBI Driver required CDC Virtual Com Port The data is output via SBI protocol through a virtual serial interface PC xBPI Secura and Quintix only Driver required CDC Virtual Com Port The data is output via xBPI protocol through a virtual serial interface PC spreadsheet format driver on balance The data is written in tabular format to an open file on the PC e g Microsoft Excel OpenOffice Calc PC text format driver on balance The data is written as text to an open file on the PC e g Microsoft Word OpenOffice Writer Off Data transmission is deactivated More information can be found in the USB Port chapter on page 72 30 User Manual for Secura Quintix Practum Display brightness Bright Medium Acoustic signal Vv Loud System Settings Setup Menu 2 Connection with Sartorius lab printer via the supplied printer cable Device Protocol menu option Select the desired setting for connection to the printer YDP30 YDP40 The connected printer is automatically detected and the connection is established Off The connection to the printer is deactivated 3 Connection to a serial printer or another external serial device via a 9 pin serial interface Mini
3. USB Port Beer ES wie File Action View Help gt Bm El Bi gt A Display adapters gt ef DVD CD ROM drives b gj Human Interface Devices gt lt q IDE ATA ATAPI controllers 4 amp Keyboards L ES HID Keyboard Device Standard PS 2 Keyboard p n Mice and other pointing devices DE German Germany v EN English United States JP Japanese Japan CH Chinese Simplified PRC Show the Language bar few ue ane and oa papani ome 9 et ewe retra oce D iton gota tet mots Ld doma mom omm V Grat ernen ter in own DD ese eo vn nth rta iu V Me Pho sin tm a btt hy peo itte He hit a Wr Ves gens inns gn sais mem iL Io D gw yera pte peo rpm Sema odd Latare sees n ao red etm m E ES idane sites Co 2 1099 jg esee liockl Microsoft ecel SF ne Mome Insert Page Form Osta Rene View A NA Bs Font Alignment Number Styles Celts hpsoaed A A s D 100 222 4 N 100 222 9 T 650 3399 T 50 333 9 Gt 150 555 9 Gf 150 5554 User Manual for Secura Quintix Practum gt Function test The HID keyboard connection appears in the Device Manager of the PC under Connections Keyboards Set English USA in the language bar of the PC Note If English UK is chosen G is printed instead of G Configure how Microsoft Excel treats numbers In Excel go to File Options
4. 45 Density i4 kk eal ek ee ee eR ae RE ER eos eb eed ds 48 Percentage uuu eae regem ttr enis 52 Convetslott i c rre gea e crate OR adc een 55 Unstable Condition 57 Checkweighing ses roces erm ass ae 59 Peak Hold eusie d rrr rr ue tenus 61 odd 63 Calibration and Adjustment 66 GLP compliant Printout 70 USB Port esee oe aaa Haaren 72 Communication with Peripheral Devices 72 Direct Transfer of Data PC 2 2 2222 00 000 73 Connection with Sartorius Lab Printer YDP40 77 Connection for RS 232 Configuration 77 Status Messages cesa ee Reg epe 83 Shipping the Balance 204 85 Care and Maintenance 04 88 Cleaning the Balance 88 Disposal erm eme m rt reme 93 Specifications s ee nr ns er he Rees 94 General Data cele de dre ea 94 Model specific Data 222222220 eee ee eee 95 ACCESSOTIES C 99 Balance Dimensions llle 100 EC Declaration of Conformity 2222er 104 EC Type approval Certificate 2 22 2022 105 Plates and Markings 0 2 02 ee eee eee eee 106 User Information User Information Warning Danger Symbols Warning danger symbols used in these instructions gt gt gt Danger of explosion Potential danger of physical injury or death Danger of electrical shock Potential danger of physical injury or death Warning of potential
5. Advanced Editing options and set the following separators Decimal separator Period Thousand separator Empty none Configure the typographical quotation marks for OpenOffice Calc In Calc go to Tools Autocorrect Options Custom Quotes and set the following Simple quotes At the beginning of a word Empty space U 200F At the end of a word gt The following displays appear after data is transferred to the PC Microsoft Excel 2010 example Gross Tare Net r a wA I ol Insert Page Layout Courier 12 z U abe x x 100 000 4 T 50 000 4 G 150 000 4 lt More settings USB mass storage Storage connect to PC USB Port PC text format set on balance and Microsoft Word 2010 example Gross Tare Net 2 USB Connection PC SBI and PC xBPI Operating Mode To use the balance as a slave device for the protocols PC SBI and PC xBPI first install a USB driver on the connected PC This driver can be located in the Driver folder on the balance The balance is then operated via a virtual serial interface COM port Installing the USB Driver gt Connect the balance to the PC using the supplied USB connection cable P To access the balance system settings select K Setup in the menu To access the USB mass storage menu option on the balance Go to More settings and select the USB mass storage option To connect the balance memory to the PC Select ST
6. Directive 2004 108 EC Electromagnetic compatibility Richtlinie 2006 95 EG Elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen Directive 2006 95 EC Electrical equipment designed for use within certain voltage limits Das Ger t erf llt die anwendbaren Anforderungen folgender harmonisierten Europ ischen Normen The apparatus meets the applicable requirements of the harmonized European Standards listed below 1 Richtlinie 2004 108 EG Directive 2004 108 EC EN 61326 1 2006 Elektrische Mess Steuer Regel und Laborger te EMV Anforderungen Teil 1 Allgemeine Anforderungen Electrica equipment for measurement control and laboratory use EMC requirements Part 1 General requirements 2 Richtlinie 2006 95 EG Directive 2006 95 EC EN 61010 1 2010 Sicherheitsbestimmungen f r elektrische Mess Steuer Regel und Laborgerate Teil 1 Allgemeine Anforderungen Safety requirements for electrical equipment for measurement control and laboratory use Part 1 General requirements Jahr der Anbringung der CE Kennzeichnung Year of attachment of CF marking 12 Sartorius Weighing Technology GmbH Gocttingen 2012 04 12 iV P Qe V fh Dr Reinhafd Baumfalk Dr Dieter Klausgrete Vice President RAD Head of international Certification Management Diese Erkl rung bescheinigt die bereinstimmung mit den genannten EG Richtlinien ist jedoch keine Zusicherung von Eigenschaften Bei einer mit uns nicht abgestimmten A
7. On the right choose whether the measurements are started manually with Manual or automatically with Auto Select Y to confirm Select O to zero the balance if necessary To weigh a living animal place a container or cage on the weighing pan Select T to tare User Manual for Secura Quintix Practum 57 Unstable Condition isoCAL 349 21 Measurements Measurements 5 58 Place the animal in the container If the start of measurement is set to Manual select START If the start of measurement is set to Auto the measurement begins as soon as the individual weight values fall within the preset fluctuation range instability The specified number of measurements is carried out The average is calculated and displayed To view the current weight value select the X button on the weighing display The fluctuating current weight value is displayed in gray To change back to viewing the calculated average select the Net button again To exit the function select END or remove the sample from the weighing pan The application returns to its original point o There is an online animation for this application Click here to view it User Manual for Secura Quintix Practum Checkweighing Checkweighing Purpose Use this application to check whether a weight value falls within the specified tolerances This application also makes it easy to fill sample materials to a specifi
8. The 1SO GLP printout can have the following lines 2012 07 23 14 50 Sartorius Mod Secura 5101 SerNo 0027400115 BAC 00 51 01 APC 01 70 02 ID 56 L ID 1 Comp1 41 9 g Comp2 41 9 g Sum 85 8 g 2012 07 23 14 50 Name gt A sample ISO GLP printout for external calibration adjustment can be seen below 2012 07 23 14 57 Sartorius Mod Secura 5101 SerNo 0027400115 BAC 00 51 01 APC 01 70 02 ID 56 2012 07 23 14 57 External calibration Start manually Set 5000 0 g Dev 3 0 g External adjustment Dev 0 0 g 2012 07 23 14 57 Name User Manual for Secura Quintix Practum 71 USB Port USB Port Communication with Peripheral Devices Purpose The interface is used to exchange data with connected peripheral devices Measured values and calculated values can be output to a printer PC or second display conversely control commands and data inputs can be sent to connected devices e g PC The protocols SBI and xBPI can be transmitted via the USB port The following connections can be established with peripheral devices PC SBI PC xBPI Sartorius order no PC spreadsheet format Host 1 YCCO4 D09 PC text format Master eo maxcF off Mini B Type A Removable data carrier Printer equipment Printer YDP30 SE 2 supplied YDP40 Device lt me Off Slave See Mini A Type B Sartorius order no Printer YDP20 OCE 3 YCC03 D09 Second display YRDO3Z USB RS 232 SBI iere USB RS 232 xBPI Slave
9. The report also Calibration function External calibration err cdiiptelior Stute ante gives the result of the adjustment process Calibration weight Set 2000 00 g Calibration deviation Dev 0 02g Adjustment function External adjustment p Select X Adjustment deviation Dev 0 00g gt The balance is now calibrated and adjusted 68 User Manual for Secura Quintix Practum Report Date and Time Calibration function Start calibration Calibration deviation Adjustment function Adjustment deviation 14 Jun 2012 15 18 Internal calibration Start isoCAL Niv Dev 0 01 g Internal adjustment Dev 0 00 g x Calibration and Adjustment Automatic Calibration Adjustment with isoCAL Fully automatic calibration adjustment ensures that the balance is automatically calibrated and adjusted when predefined time intervals or temperature values are exceeded This function varies in different models Secura isoCAL is automatically carried out based on time or temperature and each time the balance is leveled This function can be switched off via the system settings see Calibration Adjustment on page 26 Quintix isoCAL is automatically carried out based on time or temperature This function is always active and cannot be switched off In Secura models every adjustment process including the identified deviations is documented and save on the balance The saved reports can be
10. x OAR Balance with Type Approval Certificate for Argentina x OKR Balance with Type Approval Certificate for South Korea x ORU Balance with Type Approval Certificate for Russia x OIN Balance with Type Approval Certificate for India x OCA Balance with Type Approval Certificate for Canada 2 All models with CN type SQP 98 User Manual for Secura Quintix Practum Accessories Options Accessories Options See separate accessories list at www sartorius com User Manual for Secura Quintix Practum 99 Balance Dimensions Balance Dimensions Secura models with readability of 0 1 mg All dimensions are given in millimeters 210 211 201 100 User Manual for Secura Quintix Practum Quintix and Practum models with readability of 0 1 mg All dimensions are given in millimeters 85 o f n CN l Balance Dimensions 211 201 User Manual
11. 0 79767 0 79758 0 79750 0 79741 0 79733 0 79725 0 79716 0 79708 11 0 79699 0 79691 0 79682 0 79674 0 79665 0 79657 0 79648 0 79640 0 79631 0 79623 12 0 79614 0 79606 0 79598 0 79589 0 79581 0 79572 0 79564 0 79555 0 79547 0 79538 13 0 79530 0 79521 0 79513 0 79504 0 79496 0 79487 0 79479 0 79470 0 79462 0 79453 14 0 79445 0 79436 0 79428 0 79419 0 79411 0 79402 0 79394 0 79385 0 79377 0 79368 15 0 79360 0 79352 0 79343 0 79335 0 79326 0 79318 0 79309 0 79301 0 79292 0 79284 16 0 79275 0 79267 0 79258 0 79250 0 79241 0 79232 0 79224 0 79215 0 79207 0 79198 17 0 79190 0 79181 0 79173 0 79164 0 79156 0 79147 0 79139 0 79130 0 79122 0 79113 18 0 79105 0 79096 0 79088 0 79079 0 79071 0 79062 0 79054 0 79045 0 79037 0 79028 19 0 79020 0 79011 0 79002 0 78994 0 78985 0 78977 0 78968 0 78960 0 78951 0 78943 20 0 78934 0 78926 0 78917 0 78909 0 78900 0 78892 0 78883 0 78874 0 78866 0 78857 21 0 78849 0 78840 0 78832 0 78823 0 78815 0 78806 0 78797 0 78789 0 78780 0 78772 22 0 78763 0 78755 0 78746 0 78738 0 78729 0 78720 0 78712 0 78703 0 78695 0 78686 23 0 78678 0 78669 0 78660 0 78652 0 78643 0 78635 0 78626 0 78618 0 78609 0 78600 24 0 78592 0 78583 0 78575 0 78566 0 78558 0 78549 0 78540 0 78532 0 78523 0 78515 25 0 78506 0 78497 0 78489 0 78480 0 78472 0 78463 0 78454 0 78446 0 78437 0 78429 26 0 78420 0 78411 0 78403 0 78394 0 78386 0 78377 0 78368 0 78360 0 78351 0 78343 27 0 78334 0 78325 0 78317 0 78308 0 78299 0 78291 0 78282 0 78274 0 7826
12. Es E fri Uwe Ge om al ee REIHE en The USB CDC serial port connection appears in the Device Manager of the gt IKB Portable Devices i 4 Ports COM amp LPT PC under Connections 1 Communications Port COMI 17 Intel R Active Management Technology The data transfer commands can be found in the Data Input Format chapter P B Processors User Manual for Secura Quintix Practum USB Port Connecting with Sartorius Lab Printer YDP30 YDP40 Printer equipment Printer YDP30 YDP40 Off Device Slave 2 supplied CEE a o eg B Mini A Type B gt Connect the balance to the Sartorius printer using the supplied USB connection cable gt The balance detects the printer automatically No settings need to be changed Connections for RS 232 Configuration Sartorius order no Printer YDP 20 OCE a 3 YCC03 D09 Second display YRDO3Z a USB RS 232 xBPI Slave RS 232 9 pin gt Connect the peripheral device to the balance via Sartorius connection cable YCC03 D09 RS 232 9 pin gt Define the desired system settings See USB Port on page 30 User Manual for Secura Quintix Practum 77 78 USB Port Data Output by Print Command Automatic Data Output Example Output without ID Example Output with ID Interface Specification Data Output The data output can be activated either manually wh
13. Mini A RS 232 9 pin Off 72 User Manual for Secura Quintix Practum Direct Transfer of Data PC Prerequisites USB Port PC with operating system Windows 7 Vista XP or 2000 USB connection cable A to Mini B from PC to balance Sartorius order no YCCO4 DO09 In legal metrology data cannot be transmitted to a PC or used without an Alibi memory The balance does not have its own Alibi memory however connection to a printer or Alibi printer is permitted AR WA m7 n Sartorius order no YCC04 D09 PC SBI CDC virtual PC xBPI _ COM port 2 PC spreadsheet format _ HID Tastatur 1 Host PC text format _ Master Off Removable data carrier Device Protocol PC xBPI 1 USB connection as PC keyboard without additional driver via PC with spreadsheet text format program e g Microsoft Office or OpenOffice The Office program installed on the PC must be configured in order for the data from the balance to import correctly to a spreadsheet text format program gt Connect the balance to the PC using the supplied USB connection cable To access the balance system settings select X Setup in the menu 4 To access the PC spreadsheet format menu option on the balance Go to USB port and select the Device Protocol option User Manual for Secura Quintix Practum 73 74
14. To exit the function select END gt The application returns to its original point e There is an online animation for this application Click here to view it gt User Manual for Secura Quintix Practum 65 66 Calibration and Adjustment Background Calibration and Adjustment During calibration a calibration weight is used to determine how much the displayed value deviates from the actual measurement value This deviation is compared to a specified desired value Adjustment eliminates this deviation or reduces the permissible error limits For Secura Quintix and Practum models calibration and adjustment are combined as one process The balance is automatically adjusted after each calibration Before using a verified balance for legal metrology calibration adjustment must always be carried out at the balance placement station This can be performed automatically or manually Practum models with accuracy class I can be calibrated using an external weight When and How Often User Manual for Secura Quintix Practum To achieve the highest accuracy possible regularly calibrate and adjust the balance daily after switching on the balance each time the balance is leveled each time ambient conditions have changed temperature humidity or air pressure each time the balance is set up at a new placement station or moved on its current station The following describes in detail the avai
15. filter level Weighing pan size mm 90 120 120 180 180 180 180 Weighing chamber height mm 209 209 209 Net weight approx kg 5 1 5 1 5 1 5 2 5 2 5 2 5 2 Quintix Model 224 1x 313 1x 213 1x 5102 1x 3102 1x 1 2102 1x 1102 1x Accuracy class Type 2 SQP A SQP B SQP B SQP C SQP C SQP D SQP D Max g 220 310 210 5 100 3 100 2 100 1 100 Scale interval d mg 0 1 1 1 10 10 10 10 Verification scale interval e mg 1 10 10 100 100 100 100 Min mg 10 20 20 500 500 500 500 Tare subtractive lt 100 of the max weighing capacity Typical stabilization time S 3 15 1 5 1 5 1 5 2 2 isoCAL Temperature change K 1 5 2 2 2 2 2 2 Time interval h 4 6 6 6 6 6 6 Display result s 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 depending on the set filter level Weighing pan size mm 90 120 120 180 180 180 180 Weighing chamber height mm 209 209 209 Net weight approx kg 4 9 4 9 4 9 5 2 5 2 4 7 4 7 User Manual for Secura Quintix Practum 97 Specifications Quintix Model 612 1x 5101 1x 5100 1x Accuracy class Type SQP D SQP E SOP E Max g 610 5 100 5 100 Scale interval d g 0 01 0 1 1 Verification scale interval e g 0 1 1 1 Min g 0 5 5 50 Tare subtractive lt 100 of the max weighing capacity Typical stabilization time S 2 2 2 isoCAL Temperature change K 2 2 2 Time interval h 6 6 6 Display res
16. for Secura Quintix Practum 81 USB Port Overview of Interface Commands Commands Format Command Action Function Comments 1 ESCP Print Corresp to menu with without stability 1 ESCT Tare or zero 1 ESCK Filter Very stable conditions 1 ESCL Filter Stable conditions Corresp to menu stable 1 ESCM Filter Unstable conditions Corresp to menu unstable 1 ESC N Filter Very unstable conditions 1 ESCO Lock keys 1 ESC Q Acoustic signal 1 ESC R Unlock keys 1 ESC S Restart 1 ESCZ Internal calibration adjustment Depending on menu and model 1 ESC U Tare 1 ESC V Zero 1 ESC W Ext adjustment with standard weight Depending on menu not available for verified models 2 ESC kP_ Print as with Print button 2 ESC s3_ Go back exit cancel 2 ESC x1_ Print balance type 2 ESC x2_ Print serial number 2 ESC x3_ Print balance software version 2 ESC x4_ Print software version of display and control unit 2 ESC x5_ Print user device ID 82 User Manual for Secura Quintix Practum Status Messages Status Messages Messages appear on the display when certain events occur nfo messages are displayed for two seconds The program then returns automatically to its original point Error messages are displayed until they are acknowledged with a key Key Fadeout To avoid operating only the available functions keys according to the weighing situ
17. into the socket at the back of your balance 2 Afterwards plug the AC adaptor into an electrical outlet mains power supply FCC Rules Safety Precautions NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver Consult the dealer or an experienced radio TV technician for help Shielded Cables Connections between the devices and peripherals must be made using shielded cables in order to maintain compliance with FCC radio frequency emission limits Modifications Any modifications made to this device
18. is calculated and then the objects with an unknown piece count are weighed The balance displays the number of parts and the piece weight User Manual for Secura Quintix Practum 23 System Settings Setup Menu System Settings Setup Menu The Settings Setup menu contain all basic settings for the balance Not all functions settings are available on verified balances Accessing the Menu and Changing Settings Select the Menu key in any application gt The menu appears E 2i wa To access the balance system settings select K Setup in the menu Settings gt The Settings Setup menu appear To scroll through the menu place a finger on the display and drag it slowly up or down gt The settings in the menu move in the corresponding direction A gray scrollbar appears on the right of the display when scrolling indicating the current location in the list of options Settings Select a setting and make the desired changes Information about available settings can be found on page 25 Select Y to confirm your changes Select lt to return to the menu The changed settings become active when you return to the first level of the menu 24 User Manual for Secura Quintix Practum Language vi ES Date and time System Settings Setup Menu List of Available Settings This section contains information on all basic balance settings which can be defined in the Setting
19. its original point There is an online animation for this application Click here to view it Peak Hold Peak Hold Purpose Use this application to calculate the maximum weight value of a sample peak value The value remains on the display for five seconds after the sample has been removed from the balance Example Use for measuring release force during an experiment or use when a load is so big that the balance display is hidden from view during weighing EJ Select the Menu key in any application Select the Peak hold symbol in the menu T gt The Peak hold application appears Max 2100 g d 0 01 g l 0 00 um To define the setting for calculating the peak hold select the gray button Peak hold gt The Peak hold settings window appears u Choose whether the peak hold max value is calculated At stability or Without stability The At stability setting is suitable for stable samples It ensures that the weight value fluctuations when placing or removing the sample from the balance do not cause the calculated peak value to be incorrect The Without stability setting is suitable for unstable samples Select Y to confirm Select O to zero the balance if necessary gt Select START Place the sample on the weighing pan User Manual for Secura Quintix Practum 61 Peak Hold gt The maximum measured weight value is displayed and kept as long as the samp
20. physical injury health risk or risk of property damage Symbols The following symbols are used in this manual Useful information and tips Notes for use in legal metrology Note regarding device operation g ze When individual buttons are displayed they should be pressed The following symbols are used in these instructions Indicates a required action gt Describes what happens after you have performed a particular step Perform steps in the specified order First action Second action E a Indicates an item in a list Conventions for this user manual The figures in this manual are based on standard balances Some displays and printouts shown in the figures may differ from those of verified balances The differences are explained in detail where they affect the operation of the balances Application Advice Technical Support Contact addresses for application advice and technical support can be found online at http www sartorius com User Manual for Secura Quintix Practum 3 Safety Information Safety Information Safety The balance complies with EU Directives and standards for electrical safety and electromagnetic compatibility Improper use or handling can however result in damage and or injury Any improper use or operation of the balance i e that is not consistent with the instructions will result in forfeiture of all claims under the manufacturer s warranty P
21. plug adaptor for your mains power supply a b Ween C d e f g h i Push 1 and slide 2 the power plug adaptor A required for your power supply into the opening of the AC adaptor module B In doing so the AC adaptor needs to lock into position 1 AC adaptor versions Euro EU except United Kingdom in a transparent bag United Kingdom in a yellow bag USA in a blue bag Australia in a red bag India in a black bag South Africa in a turquoise bag Korea in a green bag Brazil in a pink bag Argentina in a white bag Note The packaging of AC adaptor module 6971790 with line adaptors g h and i is labeled with 98671791 For use also in China and Japan Removing Replacing the AC Adaptor Unlock 1 the AC adaptor and then detach 2 it User Manual for Secura Quintix Practum 11 12 Getting Started 30 Power Connection Safety Precautions Only use original Sartorius AC adaptors The AC adaptor has an IP rating of IP40 in accordance with EN 60529 Make sure that the voltage rating printed on the manufacturer s ID label is identical to that of your local mains voltage Ifthe stated supply voltage or the plug design of the AC adaptor does not comply with your country s standard please inform the nearest Sartorius representative The power must be connected in accordance with the regulations applicable in your country 1 First of all plug the AC adaptor
22. viewed via the system settings and printed out on a PC or Sartorius lab printer see Calibration Adjustment on page 26 gt If the ambient temperature has changed since the last calibration adjustment or the preset time interval has been exceeded the red isoCAL button appears on the display D If the isoCAL function is set to Automatic the calibration adjustment process starts automatically N No additional error message will be shown when the prompt is ignored for longer than 60 seconds D lf the isoCAL function is set to Info manual start the function must be started manually To start the calibration adjustment function manually select the isoCAL button Secura Quintix gt Calibration begins automatically gt Areport appears on the display Secura and Quintix only The report indicates the deviations identified during isoCAL calibration The report also gives the result of the adjustment process Select x gt The balance is now calibrated and adjusted User Manual for Secura Quintix Practum 69 70 ISO GLP compliant Printout ISO GLP compliant Printout Characteristics The device information ID and the current date can be printed before GLP header and after GLP footer the values from the weighing series The following data is printed out GLP Header Date Time at the start of a weighing series Balance manufacturer Balance model Model serial number Bala
23. way to the front 3 Then replace the draft shield cover In doing so the draft shield cover must lock into position Balance with No Draft Shield P Install the following parts in the given order 1 In use dust cover 2 Install the shield disk 1 and turn this counterclockwise until securely in place 3 Install the pan support 2 and weighing pan 3 User Manual for Secura Quintix Practum 9 10 Getting Started Choosing a Location User Manual for Secura Quintix Practum Select the right setup location Set up the device on a stable even surface that is not exposed to vibrations e g weighing stone Maintain free access to the device at all times Choose a location that is not subject to the following negative influences Heat heater or direct sunlight Drafts from open windows AC systems and doors Vibrations during weighing Heavy traffic areas personnel Excessive moisture Electromagnetic fields Acclimatization Condensation from humidity can form on the surfaces of a cold device when it is brought into a substantially warmer area To avoid the effects of condensation condition the balance for about two hours leaving it unplugged from the power supply before plugging the balance back into the mains Getting Started Power Connection Power Supply AC Adaptor Assembly Using the wrong power plug adaptors may cause fatal electric shock and damage the equipment Use the right power
24. 01 5100 Weighing capacity g 220 120 310 210 2100 1100 610 5100 5100 Readability mg 0 1 0 1 1 10 10 10 100 1000 Repeatability mg 0 1 0 1 1 1 10 10 10 100 500 standard deviation Linearity deviation mg 0 3 0 3 3 3 30 30 30 300 1000 Sensitivity drift between ppm K 3 3 5 5 5 5 5 10 10 10 and 30 C Typical stabilization time S 4 4 3 3 3 3 3 3 3 Weighing pan size mm 90 90 120 120 180 180 180 180 180 Weighing chamber height mm 209 209 209 209 Net weight approx kg 4 5 4 5 4 9 4 9 3 1 3 1 3 1 3 1 3 1 96 User Manual for Secura Quintix Practum Model specific Data Verified Models with Country specific Type Approval Certificate Specifications Secura Model 224 1x 124 1x1 513 1x 313 1x 213 1x 5102 1x 3102 1x 2102 1x 1102 1x Accuracy class CQ Type SQP A SQP B SQP B SQP C SQP C SQP D SQP D Max g 220 310 210 5 100 3 100 2 100 1 100 Scale interval d mg 0 1 1 1 10 10 10 10 Verification scale interval e mg 1 10 10 100 100 100 100 Min mg 10 20 20 500 500 500 500 Tare subtractive lt 100 of max weighing capacity Minimum sample weight g 0 12 1 5 1 5 12 12 12 12 as per USP typical Typical stabilization time s 2 1 5 1 5 1 5 1 5 1 5 1 5 isoCAL Temperature change K 1 5 2 2 2 2 2 2 Time interval h 4 6 6 6 6 6 6 Display result s 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 depending on the set
25. 1 Adjustment function Internal adjustment Adjustment deviation Dev 0 00 g Close the report window touch x re gt The balance is now calibrated and adjusted User Manual for Secura Quintix Practum 67 Calibration and Adjustment Calibration Adjustment using an External Calibration Weight An external calibration weight is required for this function Please note the tolerance of the calibration weight being used In verified balances with accuracy class CID external calibration adjustment is M locked when the balances are used for legal metrology Secura and Quintix In verified balances with accuracy class CD external adjustment can only be accessed when the access switch is open gt Make sure that the weighing pan is empty Select O to zero the balance Select the Menu key at the bottom left of the display in the current application gt The menu appears Select the CAL button to access the calibration function Calibrate balance gt The Calibrate balance window appears Select CAL Extern gt A message appears on the display prompting the user to place the calibration weight on the weighing pan Place the calibration weight on the weighing pan gt Calibration begins automatically Report gt A report appears on the display Secura and Quintix only Data and Tiris unai ass The report indicates the deviations identified during calibration
26. 17 0 99916 0 99914 15 0 99913 0 99911 0 99910 0 99908 0 99907 0 99905 0 99904 0 99902 0 99900 0 99899 16 0 99897 0 99896 0 99894 0 99892 0 99891 0 99889 0 99887 0 99885 0 99884 0 99882 17 0 99880 0 99879 0 99877 0 99875 0 99873 0 99871 0 99870 0 99868 0 99866 0 99864 18 0 99862 0 99860 0 99859 0 99857 0 99855 0 99853 0 99851 0 99849 0 99847 0 99845 19 0 99843 0 99841 0 99839 0 99837 0 99835 0 99833 0 99831 0 99829 0 99827 0 99825 20 0 99823 0 99821 0 99819 0 99817 0 99815 0 99813 0 99811 0 99808 0 99806 0 99804 21 0 99802 0 99800 0 99798 0 99795 0 99793 0 99791 0 99789 0 99786 0 99784 0 99782 22 0 99780 0 99777 0 99775 0 99773 0 99771 0 99768 0 99766 0 99764 0 99761 0 99759 23 0 99756 0 99754 0 99752 0 99749 0 99747 0 99744 0 99742 0 99740 0 99737 0 99735 24 0 99732 0 99730 0 99727 0 99725 0 99722 0 99720 0 99717 0 99715 0 99712 0 99710 25 0 99707 0 99704 0 99702 0 99699 0 99697 0 99694 0 99691 0 99689 0 99686 0 99684 26 0 99681 0 99678 0 99676 0 99673 0 99670 0 99668 0 99665 0 99662 0 99659 0 99657 27 0 99654 0 99651 0 99648 0 99646 0 99643 0 99640 0 99637 0 99634 0 99632 0 99629 28 0 99626 0 99623 0 99620 0 99617 0 99614 0 99612 0 99609 0 99606 0 99603 0 99600 29 0 99597 0 99594 0 99591 0 99588 0 99585 0 99582 0 99579 0 99576 0 99573 0 99570 30 0 99567 0 99564 0 99561 0 99558 0 99555 0 99552 0 99549 0 99546 0 99543 0 99540 Density Values of Ethanol at Temperature T in C T C 0 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 10 0 79784 0 79775
27. 38s Sartorius User Manual Secura Quintix Practum Laboratory Balances TEUER m Contents Contents Contents Haren 2 User Information 2 222222 ernennen 3 Safety Instructions 22222200 4 Intended Use u su mtem ms 5 Getting Started eere eem ee 7 Unpacking and Equipment Supplied 7 Installing the Balance 2 0 ee ee eee eee 8 Choosing a Location sess assamese eh tms 10 Electrical Connection snmmo 11 Warm up TIME css ssepe nocne ehh dts koii eee iis 12 L vellng iuste tumore a Sees ater een 13 Below balance Weighing lesse 15 Anti theft Locking Device sssri secsi Dia a eaaa 16 Transporting the Balance 0 18 Operation i range 18 Using the Touch Screen orem 18 Setting the Language 0 0s ee eee eee 19 Operating Concept sss seses deces Re RR 20 System Settings Menu 2 000000 ee 24 2 User Manual for Secura Quintix Practum Weighing scis se e eme e oes Sees eae 34 Mass Unit Conversion 0 nense a haa eee 35 SQmin Minimum Weighing Secura only 37 Individual Identifiers Secura only 2 38 Mixing Secura and Quintix only 39 Statistics Secura and Quintix only 2 22 22 2 42 Totalizing Components Secura and Quintix only
28. 5 0 78256 28 0 78248 0 78239 0 78230 0 78222 0 78213 0 78205 0 78196 0 78187 0 78179 0 78170 29 0 78161 0 78153 0 78144 0 78136 0 78127 0 78118 0 78110 0 78101 0 78092 0 78084 30 0 78075 0 78066 0 78058 0 78049 0 78040 0 78032 0 78023 0 78014 0 78006 0 77997 User Manual for Secura Quintix Practum 51 Percentage Percentage Purpose This application is used to determine the percentage share or the percentage difference of the sample related to a reference weight Select the Menu key in any application 0 7 Select the Percentage symbol in the menu o T gt The Percentage application appears jaoC L Max 2100 g cone The reference percentage is displayed under Reference e g 10 0 0 00 um To change the reference percentage select the gray button Percentage VA The Percentage settings window appears Reference Accuracy Enter the reference percentage on the left Select a value or select enter the desired value and confirm with Select the accuracy of the percentage display on the right Select Y to confirm Select O lt to zero the balance if necessary Place a container on the weighing pan Select T to tare 52 User Manual for Secura Quintix Practum Percentage ae Place the reference sample on the weighing pan gt The weight of the reference sample is displayed isoCAL Max 2100 g d 0 01 g 0 404 32 om me gt Select START gt
29. 5 2 Quintix Model 224 124 513 313 213 5102 3102 2102 1102 Weighing capacity g 220 120 510 310 210 5100 3100 2100 1100 Readability mg 0 1 0 1 1 1 1 10 10 10 10 Repeatability standard deviation mg 0 1 0 1 1 1 1 10 10 10 10 Linearity deviation mg 0 2 0 2 2 2 2 20 20 30 30 Sensitivity drift ppm K 1 5 1 5 3 3 3 3 3 5 5 between 10 and 30 C Typical stabilization time S 3 2 1 5 1 5 15 1 5 1 5 2 2 isoCAL Temperature change K 1 5 1 5 2 4 4 2 4 4 4 Time interval h 4 4 6 12 12 6 12 12 24 Display result depending S 0 2 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 on the set filter level Weighing pan size mm 90 90 120 120 120 180 180 180 180 Weighing chamber height mm 209 209 209 209 209 Net weight approx kg 4 9 4 9 4 9 4 9 4 9 5 2 5 2 4 7 4 7 User Manual for Secura Quintix Practum 95 Specifications Quintix Model 612 5101 5100 Weighing capacity g 610 5100 5100 Readability mg 10 100 1000 Repeatability mg 10 100 500 standard deviation Linearity deviation mg 30 300 1000 Sensitivity drift between ppm K 5 10 10 10 and 30 C Typical stabilization time S 2 2 2 isoCAL Temperature change K 4 4 4 Time interval h 24 24 24 Display result depending s 0 1 0 2 0 1 0 2 0 1 0 2 on the set filter level Weighing pan size mm 180 180 180 Net weight approx kg 4 7 4 7 4 7 Practum Model 224 124 313 213 2102 1102 612 51
30. A A A A A A E E E CR LF K ID code character CR Carriage return Space LF Line feed A Displayed characters E Measurement unit symbol see Conversion Factors for Weight Units on page 36 Example 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 N 1 2 3 5 6 ii g CR LF N 1 2 3 5 6 g id T CR LF Special Outputs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 H id g h L o C a 1 x E X t T Space Cal Ext External adjustment Final readout Cal Int Internal adjustment Low Underweight CR Carriage return High Overload LF Line feed Error Messages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 ii E T T i CR LF Space 1 Settings PC SBI and USB RS232 SBI for ID of non verified digits In the SBI setting the non verified display digit is not automatically identified Please take the corresponding measures or adjust the settings on the peripheral device 80 User Manual for Secura Quintix Practum Error code number USB Port Data Input Interface Commands Commands The computer connected via the data interface can send control commands to the balance to control its functions Formats for Control Commands Syntax Format 1 Esc CR LF Format 2 Esc CR LF Esc Escape Command character Number _ Underscore ASCII 95 CR Carriage return optional LF Line feed optional Examples Format 1 Esc P Format 2 Esc x1_ User Manual
31. A for RS 232 Device Protocol menu option Select the desired setting for connection to the device Printer YDP20 0CE Second display YRD03Z USB RS232 SBI USB RS232 xBPI Secura and Quintix only Off The connection is deactivated RS232 Configuration menu option This option can be selected by going to Device Protocol and choosing the USB RS232 SBI setting Select the desired setting for the RS 232 interface Baudrate 600 to 19 200 factory setting 9600 9600 Databits 7 Bits or 8 Bits default 8 Bits 8 Bits Parity Odd Even or None default Odd Stopbits 1 Bit or 2 Bit default 1 Bit Handshake Software XON XOFF Hardware CTS RTS or Off default Hardware CTS RTS Display Brightness Set the display brightness here The following brightness levels are available Bright Medium Eco mode energy saving mode default Brightness is reduced after two minutes of inactivity Acoustic signal Set the volume of the acoustic signal here The following volume levels are available Loud Medium Low Off User Manual for Secura Quintix Practum 31 System Settings Setup Menu More settings Set password Reset settings USB mass storage Enable service mode 32 More Settings Additional service functions for the balance can be found here Set password menu option Secura only Secura models can be password protected to prevent una
32. ART User Manual for Secura Quintix Practum 75 76 USB Port B mE To install the installation program for the USB driver on the PC GU LIT IEEE ELLE Click on the appropriate removable data carrier in this case the E drive and Dent a Mennonites then click on the Driver folder Organce Share with mm 0A Q Name Dete mocddied 7 cowie amp sitem t ve u Local Data D Disk E g x 3 To select the Windows version enh Dr Click on the appropriate version of the PC Ogie Sharemith 0 9 amp sm ici Wwe ete vomalifond ca Local Dots ID Bw 12302002 152 n di WieXP and Neww 12102072 16 08 Ji wawo B 288 Start the installation program InstallDriver exe GOSE ome wees SA ETIE File dt View Toots Mel Search V Organize Share with v E D Nw o Date medfied e T does lee 23072012 1248 Bd whee 230220121248 Cc Vocal Data 0 Hnet reme 22022012 1248 nn aR 210220121248 a a 2307 2012 1248 m b Follow the instructions from the installation program Progam name SLGCUR Driver inetaller Vented poseer SEGGER Microcenteciler Gmbh amp Co KG Fee engin Rermc able neda on thes compute w JC 3 Device Manager gt Function test A Once the driver is installed direct data transfer to PC is available for both 7 balance operating modes PC SBI and PC xBPI
33. Assembling the Draft Shield Place the front and rear glass panels back into the guide Center the draft shield frame in the guide P Press the draft shield frame down against the stop and secure it again with both Torx screws P Assemble the rest of the components in reverse order See Chapter Getting Started Installing the Balance 92 User Manual for Secura Quintix Practum Disposal Disposal The packaging consists of environmentally friendly materials that can serve as secondary raw materials If the packaging is no longer required it can be disposed of in Germany at no charge via the dual system of the company VfW contract number D 59101 2009 1129 Otherwise dispose of the material according to the applicable local regulations for waste disposal The device including accessories and batteries should not be disposed of as household waste It should instead be recycled as for electrical and electronic devices For more information regarding disposal and recycling please contact our local service representatives In addition the partners listed on the following website are available to assist you within the EU 1 Go to http www sartorius com 2 In the menu bar select Service 3 Then select Disposal Information 4 The addresses of the local Sartorius disposal contact persons can be found in the PDF files listed on this page Sartorius will not take back equipment contaminated wi
34. Secura and Quintix only Purpose Prerequisites 0 00 om A Component P 1 Component 1 v On 42 User Manual for Secura Quintix Practum Statistics Secura and Quintix only Save weight values and statistically evaluate them You can save up to 99 components The values are generated as results Number of components Average Standard deviation Variation coefficient Sum of all values Lowest value minimum Highest value maximum Spread Difference between maximum and minimum For printouts a printer must be connected and configured see USB Port on page 72 Select the Menu key in any application Select the Statistics symbol in the menu gt vvv V The Statistics application appears To change settings select the gray button The Statistics settings window appears Choose whether the individual weights of the components are printed out Determine whether the balance is tared when a component is saved Select Y to confirm Select O lt to zero the balance if necessary Place a container on the weighing pan Statistics Secura and Quintix only Select T to tare Place the first component on the weighing pan e gt The weight value is displayed isoCAL Max 2100 g dz0 01 g Net 414 33 om a gt To save the component select gt ER P Remove the first component from the weighing pan and place the next comp
35. Some of these settings depend on the USB port configuration see USB Port on page 30 Printout menu option Define the settings for outputting logs and reports to a connected lab printer Manual The data is printed out when is selected in the application Automatic The data is printed out automatically Without stability No stability is required for a printout The printout does not have any unit symbols in this case With stability The data can only be printed out when stability is reached Printafter weight change Data is printed once after a threshold has been exceeded at stability and the weight has previously been reduced to less than half of the threshold Manual print menu option This option can be selected when manual print has been set in the Printout menu option Define the settings for the manual print ISO GLP printout Secura and Quintix only Activate this option when an ISO GLP compliant printout is required Tare after print Activate this option to automatically tare the balance after printing Manual print format Select the information to be printed during manual printing such as date and value Practum with Sartorius printer Only Value and Value N T G can be set Only Value w o identifier Value and Value N T GZ can be set Automatic print menu option This option can be selected when automatic print has been set in the Printout menu option gt Defin
36. The display shows the reference percentage isoCAL Max 2100 g dz0 01 g ze 1 0 0 A gt Remove the reference sample from the balance Reference weight 14 32 Place the unknown sample on the weighing pan gt The balance shows the percentage of the sample based on the reference isoCAL Max 2100 g d 0 01 g sample 4100 1 Reference weight 14 32 User Manual for Secura Quintix Practum The weight of the reference sample is displayed under Reference weight 53 Percentage To view the sample weight select the button on the weighing display gt The weight of the sample is displayed isoCAL Max 2100 g d 0 01 g 7 444328 Reference weight 14 325 To change back to viewing the percentage select the Net button again Place additional samples on the weighing pan if any to calculate their percentages based on the reference sample To exit the function select END The application returns to its original point There is an online animation for this application Click here to view it Koy 54 User Manual for Secura Quintix Practum Conversion Secura and Quintix only Conversion Secura and Quintix only Purpose Use this application to multiply the weight value by a user defined factor Division is also possible if a factor of less than zero is selected The selected factor is saved to protected memory Example You want to calculate the weig
37. The manufacturer model serial number and software version of your balance are displayed here Manufacturer Sartorius Model SECURA2102 Serial number 0012345678 Version BAC 00 50 02 xx CN 1701 Version APC 01 70 02 xx CN 6587 Calibration Adjustment Calibration Adjustment With Secura and Quintix models saved reports about the most recent calibration procedures including the identified deviations can be viewed and output to a PC or Sartorius lab printer With Secura models it is also possible to set how the automatic calibration adjustment function isoCAL is started isoCAL menu option Secura only Select the desired start option for isoCAL Off isoCAL is switched off nfo manual start A note appears on the display when predefined time intervals or temperature values are exceeded isoCAL can be started manually Automatic isoCAL is switched on Calibration adjustment starts automatically when predefined time intervals or temperature values are exceeded 1 Calibration report menu option Secura and Quintix only Calibrat rt az Select the desired report by date If there is more than one calibration report per date use the lt and gt buttons to navigate through the reports gt Select F to print the displayed report Weighing Weighing A number of basic settings for the weighing functions can be defined here Options are limited for verified balances All
38. ation are shown The following buttons are only available in certain situations 0 Only when there is a weight value within the zero setting range T Only when there is a weight value larger than zero i e positive B Only when a peripheral device is connected and Print is not locked CAL Only when calibration and adjustment functions are available and not locked LEVEL Only when the balance has an electronic level indicator gt Only when a weight value larger than zero is the value saved in the memory if the value can be saved e g value larger than SQmin START Only when an application can be started i e only when larger than zero and Start is permitted E Check Some models are equipped with an internal self test that is regularly carried out This ensures that all metrological thresholds are maintained Error Messages in Applications Value is too small when an entered value is too low for the parameter Value is too large when an entered value is too high for the parameter Incorrect licence code when password protection is enabled and the code was entered incorrectly Not able to increase when the sample 1D could not be assigned a number identifier in ascending order automatically as described in the Individual Identifiers chapter Not able to decrease when the sample ID could not be assigned a number identifier in de
39. available upon request from Sartorius Only use original Sartorius accessories Do not compromise the IP protection of the balance or of the AC adaptor Do not allow liquid penetration gt Before cleaning the AC adaptor or balance unplug the AC adaptor The balance may only be opened by specialized personnel trained by Sartorius Do not open the AC adaptor Before transporting the balance switch to stand by mode then unplug the mains plug and remove the weighing pan and pan support User Manual for Secura Quintix Practum Safety Information Hazards at the Place of Installation and during Operation If glass breaks there is a risk of injury posed by cuts on glass edges DD Lay the cables where they pose no risk of causing someone to trip Observe the additional safety and danger information in the following chapters Intended Use This high resolution balance is designed and intended for use only in laboratories and indoor areas under normal atmospheric conditions It was developed specifically for the exact determination of the mass of materials in liquid paste powder or solid form Appropriate containers must be used for each type of sample material They are designed to be used exclusively in laboratories and indoors under normal atmospheric conditions User Manual for Secura Quintix Practum General View of the Equipment General View of the Equipment
40. ctrical equipment in accordance with EN 61010 1 IEC 61010 1 Safety requirements for electrical equipment for mea surement control and laboratory use Part 1 General requirements Electromagnetic compatibility in accordance with EN 61326 1 IEC 61326 1 Defined immunity to interference Interference emission Standard Equipment Electrical equipment for measurement control and laboratory use EMC requirements Part 1 General requirements Suitable for use in industrial areas Class B suitable for use in residential areas and areas that are connected to a low voltage network that also supplies residential buildings The device can therefore be used in both areas Selectable weight units Gram kilogram carat pound ounce troy ounce Hong Kong tael Singapore tael Taiwan tael grain pennyweights milligram parts per pound China tael mommes Austrian carat tola baht mesghal and Newton Available application programs Secura models Counting Weighing in percent Density determination Peak hold Unstable condition Checkweighing Mixing Components totalization Statistics Conversion SQmin and Identifier Quintix models Counting Weighing in percent Density determination Peak hold Unstable condition Checkweighing Mixing Components totalization Statistics Conversion Practum models Counting Weighing in percent Density determination Peak hold Unstable condition Checkweighi
41. e This setting is suitable for normal weighing Dosing The display responds quickly to small changes in weight making it faster and more accurate for additional dosing and container filling functions Stability signal menu option Choose whether stability is shown with High accuracy Medium accuracy or Fast on the display The balance stability is displayed as soon as the weighing result is constant within a defined range Until stability is reached the measured values is shown in gray on the display and only turns black once the balance is deemed stable Zero Tare menu option Define settings for zeroing and taring Zero Tare function Choose whether the balance is zeroed and tared With stability or Without stability If Without stability is selected the balance will automatically be tared when T is selected If With stability is selected the balance is tared the next time stability is reached after T is selected Automatic zero zero tracking function When this option is active changes of a set fraction of scale intervals per second from the display zero point are tared automatically Zero Tare at power on When this option is active the balance is automatically zeroed or tared when switched on User Manual for Secura Quintix Practum 27 lt ET System Settings Setup Menu Printout Manual print Automatic print 28 Printout Configure the settings for printing and data output here
42. e To switch the balance back on select on the display The balance starts in the application that was most recently used before it was switched off 18 User Manual for Secura Quintix Practum Settings Language Using the Balance Setting the Language The display text is given in English as a default To change the language proceed as follows P Inthe Weighing screen select the Menu key at the bottom left of the display gt The menu is displayed Select the X button Setup in the menu D The Settings window appears Select Language or the top entry in the list gt The Language settings window appears Select the desired language such as Deutsch German Select Y to confirm gt The display immediately switches to the desired language Select lt to return to the menu User Manual for Secura Quintix Practum 19 20 Using the Balance Operating Concept This section describes the operational possibilities of your balance Operating and Display Elements on the Display A Sharp or pointed instruments such as ballpoint pens can damage the device The touch screen should only be operated by lightly touching it with your fingertips This can be done while wearing laboratory gloves ERAEN 13 PLEVEL Max 220 g d 0 0001 g oo Noun A 10 11 12 13 User Manual for Secura Quintix Practum 441 9765 in w SQ
43. e reference sample is displayed under Reference To set the thresholds select the gray button The Counting settings window appears Enter the reference piece count on the left Select a value or select enter the desired value and confirm with v Select the accuracy of the weight value during counting on the right Select Y to confirm Select O to zero the balance if necessary Place a container on the weighing pan Select T to tare User Manual for Secura Quintix Practum 63 Counting Ss Place the set number of reference samples on the weighing pan gt The weight value is displayed isoCAL Max 2100 g dz0 01 g i 1 83 om mer Select START gt The weighing displays changes and shows the piece count SCRE Ten The average piece weight is shown on the weighing display Piece weight 0 1834 Place the sample with the unknown piece count on the weighing pan gt The piece count is calculated and displayed Place other pieces if any on the balance to reach a specific desired count isoCAL Max 2100 g Piece weight 0 1834 64 User Manual for Secura Quintix Practum Counting Qt To view the total weight of the sample select the Qnt button on the weighing display gt The total weight of the sample is displayed isoCAL Max 2100 g d 0 01 g 4 95 om Piece weight 0 1834 5 To change back to viewing the piece count select the Net button again
44. e the settings for the automatic print Autom print interval Balance pre setting Interval time Select the Standard option to use model dependent output rate for weight determination interval time Choose from the last three interval times or enter the desired interval time in seconds via and confirm with X factory setting 5 seconds Autom print interval Print Select the information to be printed during automatic printing such as date and value Only Value can be set Practum with PC SBI setting Only Value w o identifier and Value can be set factory setting User Manual for Secura Quintix Practum ES Identifier System Settings Setup Menu Identifier Secura only Define identifiers for the printout via the button and in the ISO GLP printout here Under Printout in Manual print the ISO GLP printout option must be activated Set device ID menu option The device identification ID is printed in the header of the GLP printout To activate the device ID select enter the desired device ID and confirm with v Batch ID function menu option The batch ID L ID is queried one time in the GLP printout gt Activate this option to print out the batch ID Sample ID function menu option The sample ID S ID can be printed by selecting the button on the balance display gt Define settings for printing the sample ID On The sample ID is activated This ID is queried befo
45. ed target weight EJ Select the Menu key in any application Select the Checkweighing symbol in the menu Te gt The Checkweighing application appears The set thresholds are displayed under Min and Max isoCAL Max 2100 g d 0 01 g l 0 00 um To set the thresholds select the gray button Checkweighing gt The Checkweighing settings window appears Enter the lower threshold minimum and the upper threshold maximum Select enter the desired value and confirm with X Select Y to confirm Te gt The set thresholds are displayed isoCAL Max 2100 g d 0 01 g l 0 00 um 00 Select O to zero the balance if necessary Place a container on the weighing pan User Manual for Secura Quintix Practum 59 Checkweighing isoCAL 60 G d 0 01 g 193 19 Min 190 009 Max 195 005 User Manual for Secura Quintix Practum Select T to tare Select START Place the sample on the weighing pan The weight value is displayed The colored bar indicates whether the weight value falls within the thresholds Yellow The weight value is too low Green The weight value is OK and falls within the specified range Red The weight value is too high Add the sample to the weighing pan until the desired value is reached or place other samples if any on the weighing pan for checkweighing To exit the function select END The application returns to
46. en a print command is received automatically synchronized with the display or at defined intervals see application programs and autoprint settings The print command can be transmitted by pressing E or by a software command Esc P In autoprint mode data is output to the data interface port without an extra print command Data can be output automatically synchronized to the display or at defined intervals with or without stability The interval time depends on the balance operating status and balance type If the automatic data output is activated in the Device Configuration it starts immediately after the balance is turned on Data Output Formats You can output the values displayed in the line for measured values and weight units with or without an ID code The output format is configured in the device settings see Printout on page 28 253 pcs 16 characters output with SBI only Ant 255 pcs 22 characters output with printer and PC spreadsheet text format always with 1D Data Output Format with 16 Characters Characters that are blank on the display are printed as spaces Display values without a decimal point are printed without a decimal point Normal Operation Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A A A A A A A E E E CR LF OT or w Space CR Carriage return A Displayed characters LF Line feed E Measurement unit symbol Decimal poi
47. ersonnel need to have read and understood these installation instructions including the safety instructions Inthe event of use in systems and ambient conditions which have greater safety requirements you must observe the requirements and provisions applicable in your country Always keep the equipment and balance freely accessible Any installation work or balance usage that does not conform to the instructions in this manual results in forfeiture of all claims under the manufacturer s warranty See Specifications Danger of explosion Do not use this equipment in hazardous areas in which explosive materials are present Make sure that the voltage rating printed on the AC adaptor is identical to your local mains voltage Installation Do not operate the balance if its housing or AC adaptor including any of the connections are damaged Immediately disconnect the damaged equipment from the power by pulling the plug to turn off the power Do not expose the balance and the accessories supplied by Sartorius to extreme temperatures aggressive chemical vapors moisture shocks vibration or strong electromagnetic fields Observe the conditions of operation described in the Specifications gt Pe PIE Installation note The operator shall be solely responsible for any modifications to the equipment and for connecting any cables or equipment not supplied by Sartorius Information on operational quality is
48. f 120 mm B Weighing pan and pan support with a diameter of 90 mm Transporting the Balance Put packing pads over the glass panels Insert the AC adaptor from the cardboard box into the packing pad Put the top part of the packaging over the device parts Next put the packaged balance into the cardboard box and seal the box User Manual for Secura Quintix Practum 87 88 Care and Maintenance Care and Maintenance Service To ensure the continued accuracy of your balance we recommend scheduling regular servicing at least once a year Sartorius Service offers different service contracts with maintenance intervals that are tailored to your needs see www sartorius com service A calibration certificate should be issued as part of every maintenance session Have a qualified electrician inspect the technical safety of the AC adaptor and its connections at appropriate intervals e g every two years Repairs Repair work must only be carried out by trained service technicians Never attempt to repair the equipment when the power is turned on Unplug the AC adaptor from the electrical outlet mains supply beforehand Repairs performed by untrained persons will invalidate the warranty and may result in considerable hazards for the user and cause the balance to produce inaccurate results Contact Sartorius Service or a Sartorius dealer for the proper repair of your balance The dev
49. following service functions are available Preset value for minimum weighing SQmin Enter date for next service Reset all settings to factory settings The Calibration Adjustment menu also provides the following functions for authorized Service personnel depending on the model External linearization not for use in legal metrology Set the preload Delete the preload These functions are not available for verified and sealed balances User Manual for Secura Quintix Practum Supervisor lock Lock menu Supervisor lock Unlock menu System Settings Setup Menu Lock menu menu option Secura only Use this function to lock unlock the menu Lock Menu Quintix and Practum gt Hold down the Menu key for longer than 10 seconds P Confirm with Lock Accessing the menu or unlocking it again Hold down the Menu key for longer than 10 seconds Then select the required function User Manual for Secura Quintix Practum 33 Weighing Weighing Purpose Use this application to determine the weight of a sample within the device s specific weighing range see Specifications Select the Menu key in any application Select the Weighing symbol in the menu gt The Weighing application appears Zero P Remove the load from the balance Select O to zero the balance All weight values are measured based on this zero p
50. for Secura Quintix Practum 101 Balance Dimensions Models with readability of 1 mg All dimensions are given in millimeters 211 210 o9 o e 124 iN wel m 119 205 214 le 359 gt it i 102 User Manual for Secura Quintix Practum Balance Dimensions Models with readability of gt 10 mg All dimensions are given in millimeters User Manual for Secura Quintix Practum 103 EC Declaration of Conformity sartorius eece 5900 gt EG Konformit tserkl rung EC Declaration of Conformity Sartorius Weighing Technology GmbH Weender Landstrasse 94 108 D 37075 Goettingen Germany erkl rt in alleiniger Verantwortung dass das Betriebsmittel declares under own responsibility that the equipment Ger teart Elektronische Laborwaagen Device type Flectronically laboratory balances Baureihe Type series Secura Quintix Practum in der von uns in Verkehr gebrachten Ausf hrung mit den grundlegenden Anforderungen der folgenden Europ ischen Richtlinien bereinstimmt in the form as delivered complies with the basic requirements of the following European Directives Richtlinie 2004 108 EG Elektromagnetische Vertraglichkeit
51. g User Manual for Secura Quintix Practum SQmin 0 1200 g Purpose Weighing SOmin Minimum Weighing Secura only This function is used to compare the weight value with the defined minimum sample quantity SQmin sample quantity minimum This ensures that weighing results are above the specified minimum weight defined by your quality assurance system This function is used to observe the minimum weight in order to meet the criteria of the United States Pharmacopeia USP for example SQmin is not the same as the minimum capacity Min in legal metrology Prerequisites The balance must be set up by a service technician to be able to use the SQmin function The technician will determine the permitted minimum sample quantity and load this to your balance using the guidelines of your QA system He will document this setting via a Weighing module test as per USP certificate in which the measurements and min sample quantity are logged The SQmin function ensures that the weighing results correspond to USP guidelines Switching SOmin On Off If the SQmin function is set up on the balance go to the Settings menu Weighing SQmin to switch it on off Display of SOmin Function during Weighing Place the sample on the weighing pan gt The SQmin value is displayed in red if the weight value is smaller than the specified minimum weight The weight value is displayed in gray if it is smaller than the specified SQmi
52. g display shows the step Weight in air User Manual for Secura Quintix Practum 49 Density d 0 0001 g 4 4787 a 7a Weight in medium 0 To save the weight value select gt gt Remove the sample from the weighing pan and place it in the sample holder of the density determination kit using forceps Z Ensure that the sample is completely submerged in the buoyancy liquid and that no air bubbles have formed on the sample gt The weighing display shows the step Weight in medium To save the weight value select gt gt The balance calculates the density of the sample and displays this value To exit the function select END gt If the GLP printout function is activated the GLP printout is automatically printed see Printout on page 28 There is an online animation for this application Click here to view it 50 User Manual for Secura Quintix Practum Density Values of H O at Temperature T in C Density Tree 0 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 10 0 99973 0 99972 0 99971 0 99970 0 99969 0 99968 0 99967 0 99966 0 99965 0 99964 11 0 99963 0 99962 0 99961 0 99960 0 99959 0 99958 0 99957 0 99956 0 99955 0 99954 12 0 99953 0 99951 0 99950 0 99949 0 99948 0 99947 0 99946 0 99944 0 99943 0 99942 13 0 99941 0 99939 0 99938 0 99937 0 99935 0 99934 0 99933 0 99931 0 99930 0 99929 14 0 99927 0 99926 0 99924 0 99923 0 99922 0 99920 0 99919 0 999
53. hat particular application gt The desired application appears on the display List of Applications in the Menu The menu provides the following applications for various weighing tasks Weighing see page 34 This is the standard application that appears when the balance is first switched on Use this application to determine the weight of a sample within the device s specific weighing range Mixing Secura and Quintix only see page 39 Use this application to weigh up to 99 components one after the other for a mixture or formula in one container The balance is automatically tared after each component is weighed The weight value of an individual component or the total weight can be displayed as desired 22 User Manual for Secura Quintix Practum Using the Balance Statistics Secura and Quintix only see page 42 Use this application to save weight and calculated values and statistically analyze them You can save up to 99 components Components Secura and Quintix only see page 45 Totalize weight values You can save up to 99 components that are weighed in various individual containers Each container can be tared before each component is weighed Density see page 48 Use this application to determine the density of solid samples using a density set based on the buoyancy method The density is determined using Archimedes Principle The upward buoyant force exerted on a body immersed in a fluid is eq
54. he list The right list contains the display accuracy options The currently selected setting is marked e g All digits on Select the unit in which the weight result is displayed e g g kg ct Ib Select the display accuracy e g All digits on or Last digit off The display accuracy can be individually assigned to each unit Select Y to confirm The weighing display appears with the changed settings This setting remains until the selection is changed VV o There is an online animation for this application Click here to view it User Manual for Secura Quintix Practum 35 36 Conversion Factors for Weight Units The table contains common weight units and their conversion factors in relation to the gram Unit Factor Display Gram 1 00000000000 g Kilogram 0 00 100000000 kg Carat 5 00000000000 ct Pound 0 00220462260 Ib Ounce 0 03527396200 OZ Troy ounce 0 03215074700 ozt Hong Kong tael 0 02671725000 tlh Singapore tael 0 02645544638 tls Taiwan tael 0 026666660000 tlt Grain 15 43235835000 GN Pennyweight 0 64301493100 dwt Milligram 1000 00000000000 mg Parts per pound 1 12876677120 Ib Chinese tael 0 02645547175 tle Momme 0 26670000000 mom Karat 5 00000000000 Kt Tola 0 08573333810 tol Baht 0 06578947437 bat Mesghal 0 2 1700000000 MS Ton 0 00000 100000 t Pound ounce 0 03527396200 Ib oz Newton 0 00980665000 N Microgram 1000000 00000000000 u
55. ht per unit of a sheet of paper DIN A4 To do so proceed as follows The weight per unit e g 80 g m can be determined by dividing the weight by the surface The surface of a sheet of DIN A4 paper is 0 210 x 0 297 0 06237 m Division by 0 06237 is equal to multiplication by reciprocal value 1 0 06237 i e 16 03335 Set the factor to 16 03335 in the application EJ Select the Menu key in any application a x Select the Conversion symbol in the menu T gt The Conversion application appears ER Max 2100 9 d 001g The multiplier is displayed under Factor To set the factor and accuracy of the conversion select the gray button Conversion gt The Conversion settings window appears On the left enter the factor by which the weight of the sample will be multiplied Select a value or select enter the desired value and confirm with v Select the accuracy of the conversion display on the right Select Y to confirm Select O to zero the balance if necessary Select START User Manual for Secura Quintix Practum 55 Conversion Secura and Quintix only Place the sample on the weighing pan The weight of the sample is multiplied by the entered factor and the result is displayed isoCAL Max 2100 g d 0 01 g 81 4 gt Factor 16 03335 Place additional samples on the weighing pan if any to multiply their weights by the entered factor To view the mea
56. ice must be unplugged during repair work Unplug the power cord Repair work must only be performed by trained technicians Cleaning the Balance Cleaning the Control Panel Switch the display to Standby mode to avoid modifying the settings for operation during cleaning Touch the Menu key to switch to the application selection gt When is then selected the display goes off To switch the display back on again Select 5 at the bottom left of the display The balance starts in the application that was most recently used before it was switched off Cleaning the Balance Housing Disconnect from the supply voltage Disconnect the device from the power supply If necessary disconnect the data cable from the balance Make sure that no liquid or dust gets into the balance or the AC adaptor Never open the balance or the AC adaptor The parts contained in these cannot be cleaned repaired or replaced by the operator Remove the base plate pan support and weighing pan from the draft shield Never use cleaning agents that contain solvents or abrasive ingredients which can ultimately damage the equipment Secura and Quintix Models gt The plastic top and bottom parts of the balance housing is coated with a special substance that allows these parts to be cleaned using acetone N Do not clean the following parts with acetone or aggressive cleaning agents control panel mains plug data interface labels ve
57. lable options for calibrating and adjusting the balance Calibration Adjustment using an internal calibration weight Secura and Quintix only Calibration Adjustment using an external calibration weight Automatic calibration adjustment with isoCAL Calibration and Adjustment Calibration Adjustment using an Internal Calibration Weight Secura and Quintix only The balance is fitted with an internal calibration weight in the housing This calibration weight is automatically placed on the balance by a motor during internal calibration and adjustment P Ensure that the balance is stable and the weighing pan is empty Select O to zero the balance Select the Menu key at the bottom left of the display in the current application gt The menu appears Select the CAL button to access the calibration function Calibrate balance D The Calibrate balance window appears Select CAL Intern gt Calibration begins The internal weight is automatically placed on the balance in the housing The balance is calibrated and then immediately adjusted The internal weight is automatically removed from the balance Report gt A report appears on the display Das andme iajn 43510 The report indicates the deviations identified during calibration Calibration function Internal calibration gt a to El The report also gives the result of the adjustment process Calibration deviation Dev 0 0
58. le remains on the balance To display the current weight value select the Hold button on the weighing display gt The current weight value is displayed To change back to viewing the peak hold max value select the G or possibly Net button again Remove the sample from the weighing pan In the Hold display mode the balance displays the peak hold max value for another five seconds before switching back to zero VV Place additional samples if any on the weighing pan e There is an online animation for this application Click here to view it To exit the function select END The application returns to its original point VV 62 User Manual for Secura Quintix Practum isoCAL G Max 2100 g START Purpose s T d 0 01 g 0 00 um Reference v Accuracy Counting Counting Use this application to determine the number of parts of approximately equal weight The weight of a counted reference sample is calculated and then the objects with an unknown piece count are weighed The balance displays the number of parts and the piece weight Minimize counting errors Ensure that the weight of individual parts is evenly distributed Larger reference piece counts lead to a higher degree of accuracy Select the Menu key in any application v Select the Counting symbol in the menu gt The Counting application appears The piece count of th
59. liquid is displayed under Density of liquid The following values are preset for distilled water at various temperatures 0 99823 g cm at 20 C 0 99802 g cm at 21 C 0 99780 g cm at 22 C Additional density values can be found in the table on page 50 Density Vv Density of liquid Accuracy 0 Max 220 g d 0 0001 g 0 0000 Net 78 I 0 Max 220 g d 0 0001 g 4 8909 Weight in air vv v V Yy vv Density To change the density of the buoyancy liquid select the gray button The Density settings window appears Enter the density of the buoyancy liquid on the left Select a value or select enter the desired value and confirm with v Select the accuracy of the density result on the right Select Y to confirm Attach the sample holder to the frame of the density determination kit Fill the beaker in the density determination kit with the buoyancy liquid Ensure that the sample holder is sufficiently immersed in the liquid in order to hold the sample later If distilled water is used as the buoyancy liquid add three drops of tenside to reduce the effect of surface tension on the measurement result Select T to tare The balance is tared with the prepared density determination kit To begin density determination touch START Place the sample on the weighing pan above on the frame of the density determination kit The weighin
60. low S ID 11 N 200 21 g S ID 12 N 200 19 g Mixing Secura and Quintix only Mixing Secura and Quintix only Purpose Use this application to weigh up to 99 components one after the other for a mixture or formula in one container The balance is automatically tared after each component is weighed The weight value of an individual component or the total weight can be displayed as desired Example You want to weigh several components of a formula in one container EJ Select the Menu key in any application Select the Mixing symbol in the menu T gt The Mixing application appears isoCAL Max 2100 g d 0 01 g 0 00 um a To change settings select the gray button gt The Mixing settings window appears Choose whether the individual weights of the components are printed out when a printer is connected Select Y to confirm Select O to zero the balance if necessary Place a container on the weighing pan Select T to tare User Manual for Secura Quintix Practum 39 Mixing Secura and Quintix only Place the first component on the weighing pan gt The weight value is displayed Max 2100 g Net 414 33 om a gt To save the component select gt d 0 01 g 0 T gt The component is saved and the balance is automatically tared isoCAL Max 2100 g d 0 01 g Nett 0 00 Component Place the next component o
61. ltig bis 30 09 2022 Valid until Anzahl der Seiten 11 Number of pages Gesch ftszeichen PTB 1 12 4057729 Reference No Benannte Stelle 0102 Notified Body Zertifizierung Braunschweig 01 10 2012 Bewertung Certification Evaluation Im Auftrag Siegel Im Auftrag On behalf of PTB Seal bud Dipl Ing M Denzel On behalf of PTB ay Dipl Ing M Link EG Bauartzulassungen ohne Unterschrift und Siegel haben keine G ltigkeit Diese EG Bauartzulassung darf nur unver ndert weiter verbreitet werden Ausz ge bed rfen der Genehmigung der Physikalisch Technischen Bundesanstalt EC Type approval Certificates without signature and seal are not valid This EC Type approval Certificate may not be reproduced other than in full Extracts may be taken only with the permission of the Physikalisch Technische Bundesanstalt Die Hauptmerkmale Zulassungsbedingungen und Auflagen sind in der Anlage enthalten die Bestandteil der EG Bauartzulassung ist The principal characteristics the approval conditions and the special conditions if any are set out in the Annex which forms an integral part of the EC Type approval Certificate User Manual for Secura Quintix Practum 105 Plates and Markings Schilder und Marken Plates and Markings Plaques et marques Placas y Marcas Etichette e Sigilli ww CIT Contrassegno Typ Waage Type weighing instrument Type d instrument de pesage Tipo del instrumento de
62. min 3 0500 g mm p Toolbar with currently available buttons Zero Tare and possibly Print data output and GLP printout Metrology line additional info for minimum capacity Min and the verification scale interval e appear on verified balances Warning symbol for calculated values negative gross values or values that are smaller than the minimum initial weight SQmin Current measurement value Set weight unit and display accuracy see page 35 Run application such as saving the weight value of a component Settings for the selected application Menu key switch to menu and functional selection SQmin minimum weighing Secura only see page 37 Bar graph scaled measurement value display percentage weighing capacity Preceding symbol for weight value Switch display value for application such as net value total value weight value or calculated value Field for status and warning displays Using the Balance The Menu All balance application and settings can be accessed via the balance menu P To access the menu select the Menu key located at the bottom left of the display in any application gt The menu appears Mixing 1 Selected application such as Mixing 2 Application selection area symbols for all available applications see List of Applications in Menu on page 22 Function area Back run the most recent application 5 Setup menu access the balance system settings see System Setting
63. n value The weight value cannot be saved or printed out in applications depending on the setting in the Safety level menu User Manual for Secura Quintix Practum 37 38 Weighing Purpose Prerequisites Example User Manual for Secura Quintix Practum Individual Identifiers Secura only You can define identifiers for the following print jobs Device identification ID printed in header of GLP printout Batch ID L ID queried after each GLP head in GLP printout Sample ID S ID for printouts via the button This ID is queried before each printout The balance must be connected to a Sartorius lab printer or PC for printouts see USB Port on page 72 The settings for individual identifiers can be configured in the system settings under Identifier see Identifier Secura only on page 29 The GLP printout can be activated in the system settings under Print function in Manual print see Printout on page 28 Starting the Printout Configuration of system settings for printing sample ID S ID Identifier Sample ID function Autom increment P Place the sample on the weighing pan Select 9 to print The identifier for the printout is displayed The displayed value can be changed if desired Delete the displayed value Select C Delete the last character Select Select Y to confirm The weight value is printed A sample printout can be seen be
64. n the weighing pan a To save the component select gt Continue this procedure with additional formula components 40 User Manual for Secura Quintix Practum Mixing Secura and Quintix only Nett To view the total weight select the Net1 Total button on the weighing display isoCAL Max 2100 g d 0 01 J Total A 26 28 Component 3 VV 0 T gt The total weight is displayed To change back to viewing the individual weights of each component select the Net1 Total button again To exit the function select END The total weight is displayed and the application switches back to its original point Printing Results Prerequisites For printouts a printer e g Sartorius YDP40 or PC must be connected and configured see USB Port on page 72 In the Mixing settings window the Print component option must be set to On gt d 0 01 g isoCAL 4206 28 Max 2100 g VV If a printer is connected an additional button automatically appears at the top right of the display gt When each component is saved their weight value is printed Comp 1 Comp etc Select END to print the total weight T Comp A sample printout is given below Comp1 14 33 g Comp2 5 97 g Comp3 5 98 g T Comp 26 28 g ec There is an online animation for this application Click here to view it gt User Manual for Secura Quintix Practum 41 Statistics
65. nce software version number BAC Display software version number APC Identification number ID Device and batch ID if activated in the system settings GLP Footer Date Time at the end of a weighing series Field for signature Configuration To print the ISO GLP printout define the following system settings see Printout on page 28 gt Activate ISO GLP compliant printouts Go to the Printout menu select Manual with stability and then under Manual print set the ISO GLP printout option to On Set printout format of date and time Go to the Printout menu and then under Manual print select Manual print format Select any setting except Value w o identifier ThelSO GLP printout is not printed if Value w o identifier is set when connecting to a PC ThelSO GLP printout is only printed if the Manual with stability setting is selected under Printout Value w o identifier is only displayed under Manual print format when printing out to the PC Operation To print the header and the first measurement value Select the F button or START if an application is active gt The header is included with the first printout To print the header and reference data automatically when an application program is active Select the END button Print the footer and exit the application Select the button User Manual for Secura Quintix Practum ISO GLP compliant Printout gt
66. nderung des Produktes verliert diese Erkl rung ihre G ltigkeit Die Sicherheitshinweise der zugeh rigen Produktdokumentation sind zu beachten This declaration certifies conformity with the above mentioned EC Directives but does not guarantee product attributes Unauthorised product modifications make this declaration invalid The safety information in the associated product documentation must be observed SWT12CE004 36950 000 58 SOP 3 RD 045 fo2 For verified balances the conformity declaration supplied with the balance is valid for use in the EEA Please retain this declaration 104 User Manual for Secura Quintix Practum EC Type approval Certificate R3 0022 Physikalisch Technische Bundesanstalt Braunschweig und Berlin PIB EG Bauartzulassung EC Type approval Certificate Zulassungsinhaber Sartorius Weighing Technology GmbH Issued to Weender Landstr 94 108 37075 G ttingen Rechtsbezug Richtlinie 2009 23 EG vom 23 April 2009 ber nichtselbstt tige Waagen In accordance with ABI L 122 S 6 Directive 2009 23 EC of 23 April 2009 on non automatic weighing instruments OJ L 122 p 6 Bauart Nichtselbsttatige elektromechanische Pr zisionswaage Non In respect of automatic electromechanical high accuracy weighing instrument Typ SQP Type CIDMax 50 g 220 g e 1 mg 2 mg n lt 220000 Ci Max 1 g 5100 g e 0 01 g 1 g n lt 51000 Zulassungsnummer D12 09 014 Approval No G
67. ng Balances verified for use in legal metrology comply with the requirements of Council Directive 2009 23 EC EN 45501 1992 and OIML R76 2006 M For balances verified for use in legal metrology in accordance with EU requirements refer to the information on the balance For balances verified for use in legal metrology in accordance with EU requirements the legal regulations apply 1 Limited for verified models 94 User Manual for Secura Quintix Practum Specifications Model specific Data Secura Model 224 124 513 313 213 5102 3102 2102 1102 Weighing capacity g 220 120 510 310 210 5100 3100 2100 1100 Readability mg 0 1 0 1 1 1 1 10 10 10 10 Repeatability standard deviation mg 0 1 0 1 1 1 1 10 10 10 10 Linearity deviation mg 0 2 0 2 2 2 2 20 20 20 20 Minimum weight as per USP g 0 12 0 12 1 5 1 5 1 5 12 12 12 12 typical Sensitivity drift ppm K 1 5 1 5 3 3 3 3 3 3 3 between 10 and 30 C Typical stabilization time S 2 2 1 5 1 5 1 5 1 5 1 5 1 5 1 5 isoCAL Temperature change K 1 5 1 5 2 4 4 2 4 4 4 Time interval h 4 4 6 12 12 6 12 12 24 Display result depending s 0 2 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 0 1 0 2 on the set filter level Weighing pan size mm 90 90 120 120 120 180 180 180 180 Weighing chamber height mm 209 209 209 209 209 Net weight approx kg 5 1 5 1 5 1 5 1 5 1 5 2 5 2 5 2
68. nt User Manual for Secura Quintix Practum Special Outputs USB Port Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Space Cal Ext External adjustment Final readout Cal Int Internal adjustment Low Underweight CR Carriage return High Overload LF Line feed Error Messages Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Space Error code number Example Output of Weight Value 111 255 g Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 4 d a 23 5 g XR XE e Go q ew X 1 8 L 6 P g c RE ER Position 1 Plus minus or space Position 2 10 Space or weight value with decimal point leading zeros are output as spaces Position 11 Space Position 12 14 Characters for unit of measure or space Position 15 Carriage retum Position 16 Line feed 1 Settings PC SBI and USB RS232 SBI for ID of non verified digits In the SBI setting the non verified display digit is not automatically identified Please take the corresponding measures or adjust the settings on the peripheral device User Manual for Secura Quintix Practum 79 USB Port Data Output Format with 22 Characters When data is output in this format ID codes with six characters will precede data with a 16 character format These six characters identify the subsequent value Normal Operation 1 3 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 K K K K K K A A A
69. o de programa Commutatore di accesso al menu 8 gesperrt locked verrouill bloqueado bloccato ol USB Schnittstelle USB interface Interface USB Interfaz USB Interfaccia USB ODO Spannungsversorgung Power supply Alimentation Fuerte de alimentaci n Alimentazione Beispiel f r Kennzeichnungsschild der bereits qeeichten Waage k Example of descriptive plate on a weighing instrument already verified Exemple de plaque d identification d une balance v rifi e Ejemplo de r tulo de caracteristicas del instrumento de pesaje ya verificado Esempio di etichetta d identificazione dello strumento per pesare qi omologato Sartorius Weighing Technology Gms 0 2 0 Gostingen Germany 7 ML SECURA224 1CEU COSA C 30 C iso CAL C 12 M Sarteries Weighing Techeolegy GmbH Goettingen Germany QUINTIX513 1CEU CE to M Typ Waage Type weighing instrument Type d instrument de pesage Tipo del instrumento de pesaje Tipo di strumento per pesare SOP A SOP B SOP C SOP D SOP E EG Bauartzulassung EC type approval certificate Certificat d approbation CE de type Certificado de aprobaci n CE de tipo Certificato di Approvazione CE del Tipo D12 09 014 PPSQ090712 User Manual for Secura Quintix Practum 107 Sartorius Weighing Technology GmbH Weender Landstrasse 94 108 37075 Goettingen Germany www sartorius com Copyright by Sartorius Goettingen Germany No pa
70. oint within 2 of the weighing range around the zero point gt Place an empty container on the balance if weighing with containers Select T to tare the balance The balance displays zero again after being tared The tared value is subtracted from the overall weighing range of the balance The balance can be tared throughout its entire weighing range Tare Place the sample on the weighing pan gt The measured value can be read as soon as the weight value stops changing and the unit is displayed The balance stability is displayed as soon as the weighing result is constant within a defined range Until stability is reached the measured value is shown in gray on the display and only turns black once the balance is deemed stable 34 User Manual for Secura Quintix Practum Weighing Mass Unit Conversion Purpose Configure the weight unit and accuracy of the weight value M Not all units can be selected on balances used for legal metrology The user can only switch between metric units milligram gram kilogram To switch to another unit select the Unit button on the weighing display Unit Accuracy JY gt The Unit Accuracy menu appears All digits on The left list contains the available units The currently selected unit is marked e g g The most recently selected units automatically appear at the top of the list Units which are rarely or never used are shown further down t
71. onent on the balance a To save the component select gt Continue this procedure with additional components The weight values of the saved components Comp1 Comp2 etc are printed on the connected printer A sample printout can be seen below VV Comp1 14 33 g Comp2 8 47 g Comp3 18 30 g Comp4 13 19 g Comp5 13 18 g m To display the intermediate result for previously saved components select FE User Manual for Secura Quintix Practum 43 Statistics Secura and Quintix only Report Number of components Average Standard deviation Variation coefficient Total Minimum Maximum Spread isoCAL ES 44 Max 2100 g n5 x 13 49 g s 3 60g sRel 27 Sum 67 47 g Min 8 47 g Max 18 30 g Diff 9 83 g VV d 0 01 g gt The following values are displayed as an intermediate result Number of saved components Average Standard deviation Variation coefficient Sum of all values Lowest value minimum Highest value maximum Spread Difference between maximum and minimum To print the intermediate result select B The analysis is printed on the connected printer as it appears in the report n x s sReL etc A sample printout can be seen below n 5 X t 13 49 g S t 3 60 g sRel 27 00 Sum 67 47 g Min 8 47 g Max 18 30 g Diff 9 85 g To switch back to the Statistics application select X Weigh additional components if an
72. ort Distances in the Lab Avoid glass breakage shocks and vibrations L Never lift or carry the balance when holding it by its draft shield Hold the balance under the housing lift it up carefully and carry it to its new location The balance needs to be re leveled and calibrated each time its setup location is changed User Manual for Secura Quintix Practum Using the Balance Using the Balance Switching the Balance On Off Standby T gt The Leveling screen is displayed first after any model is switched on Level the balance if necessary isoCAL G When the balance is switched on the following message appears on the display Secura Level The balance has been leveled Quintix and Practum Level Please check leveling Ifthe balance needs to be leveled a corresponding message appears on the display see Leveling the Balance on page 13 The balance must be regularly calibrated and adjusted to ensure correct weighing results see Calibrating and Adjusting the Balance on page 66 The display text is given in English as a default The language can be changed see Setting the Language on page 19 To switch the balance to standby mode select the Menu key at the bottom left of the display on the Weighing screen gt The menu is displayed Select the button in the Application menu gt The balance switches to standby mod
73. p etc Select END to print the total weight T Comp A sample printout is given below Fl isoCAL Max 2100 g d 0 01 g m 19 27 g VV Component Comp1 14 32 g 2 a Comp2 18 27 g Comp3 13 73 g T Comp 51 67 g Q There is an online animation for this application Click here to view it 0 User Manual for Secura Quintix Practum 47 G Density Purpose Buoyancy Prerequisites 0 0000 um Density of liquid 1 0 9982 g cm 48 User Manual for Secura Quintix Practum Density The density of solids can be determined using the buoyancy method The density is determined using Archimedes Principle The upward buoyant force exerted on a body immersed in a fluid is equal to the weight of the fluid the body displaces Calculation Basis for Density Determination Density determination using the buoyancy method is based on the following formula p Density of sample rho pm Density of buoyancy liquid Wa Weight of sample in air Wm Weight of sample in liquid p Wa Wa 7 Wa pn A Sartorius density determination kit is required for this function for analytical balances YDK03 for precision balances YDK04 Mount the density determination kit on the balance and prepare it as described in the kit instructions Select the Menu key in any application Select the Density symbol in the menu gt The Density application appears The density of the buoyancy
74. pesaje Tipo di strumento per pesare SOP A SOP B SOP C SOP D SOP E EG Bauartzulassung EC type approval certificate Certificat d approbation CE de type Certificado de aprobaci n CE de tipo Certificato di Approvazione CE del Tipo D12 09 014 PPS0090712 106 User Manual for Secura Quintix Practum Plates and Markings Kennzeichnungsschild mit CE Zeichen Descriptive plate with CE sign Plaque d identification avec marque CE de conformit Placa de caracteristicas con la marca CE Etichetta d identificazione con marchio CE Zeichen f r die EG Eichung gr ne Marke mit Messtechnik M Mark for EC verification green metrology sticker Marque de v rification CE M vert Marca verde con letra M de metrologia Marchio di verifica CE bollino verde con lettera stampata M TR Sicherungsstempel selbstklebende Marke oder Plombe Protective mark self adhesive mark or seal Marque de protection marque ou sceau autocollant Sello de seguridad marca autoadhesiva o precinto Sigillo di protezione bollino autoadesivo o piombo Metrologische Daten Max Min e und wenn vorhanden d Metrological data Max Min e and if existent d Donn es m trologiques Max Min e et si disponible d Datos metrol gicos M x Min e y d si esta disponible Dati metrologici Max Min e e d se disponibile tA Programmverriegelungsschalter Menu access switch Commutateur d acc s au menu Interruptor de bloque
75. re each printout Autom decrement Select this option to automatically assign the sample ID in ascending order Autom decrement Select this option to automatically assign the sample ID in descending order Off The sample ID is deactivated To enter and delete figures and values e g for the sample ID see Enter figures on the keypad on page 21 User Manual for Secura Quintix Practum 29 System Settings Setup Menu USB Port lt USB port Define the settings for data transmission to a printer or PC here Device Protocol RS232 Configuration M In legal metrology data cannot be transmitted to a PC or used without an Alibi memory The balance does not have its own Alibi memory however connection to a printer or Alibi printer is permitted Various options are available in the menu depending on the cable and peripheral device connected to the balance The balance automatically detects the connection type PC SBI PC xBPI Sartorius order no PC spreadsheet format Host 1 YCC04 D09 PC text format Master Mini B Type A Removable data carrier Printer equipment Printer YDP30 2 supplied YDP40 Device m lt Eo off Slave Mini A Type B Sartorius order no Printer YDP20 OCE 3 YCC03 D09 Second display YRDO3Z m USB RS 232 SBI Device z USB RS 232 xBPI Slave Mini A off RS 232 9 pin
76. red at the top left of the display you must level the balance To start the leveling function select the LEVEL button gt The balance position is shown as an animation of a level indicator on the display Twist the front leveling feet of the balance in the specified direction D When the level indicator animation turns green the balance is correctly leveled To exit the function select v Complete the leveling by calibrating the balance User Manual for Secura Quintix Practum 13 Getting Started Leveling with a Conventional Level Indicator Quintix and Practum The Quintix and Practum models are fitted with a conventional level indicator This is located to the left of the display The position of the air bubble in the indicator shows whether or not the balance is correctly leveled Twist both of the front leveling feet of the balance to move the air bubble so that it is centered in the circular marking The figure shows which leveling foot should be twisted in which direction Generally both feet must be adjusted in order to position the air bubble exactly in the center of the circular marking Examples Ifthe air bubble is too far to the lower right twist the right leveling foot counterclockwise see figure If the air bubble is too far to the upper right twist the left leveling foot clockwise Ifthe air bubble is too far to the left twist the left leveling foot counterclock
77. rified seal or any other plastic parts P Wipe the balance with a soft dry cloth after cleaning User Manual for Secura Quintix Practum Care and Maintenance Contaminated Equipment A Health risks from product contamination due to product deposits and the collection of residue with microbial contaminations Health risk from biological or microbiological substances Observe cleaning specifications Examine the cleaning results closely Cleaning the Draft Shield A Remove the side panels 1 Pull the side panels towards the rear stop and lift them up carefully 2 Pull the side panels out towards the back B Remove the top glass cover 1 Holding it by its rear edge pull the draft shield cover up 2 Remove the draft shield cover 3 Remove the top glass cover by pulling it backward User Manual for Secura Quintix Practum 89 Care and Maintenance C Remove the front and rear glass 4 Lift the frame cover 5 Pull the frame cover out Remove the Torx key up from the draft shield under the cover 6 Turn the key approx two times to loosen the Torx screws 90 User Manual for Secura Quintix Practum Care and Maintenance 7 Pull out the draft shield frame from the side of the guide and remove the draft shield frame by pulling up 8 Pull out the front and rear glass panels upwards User Manual for Secura Quintix Practum 91 Care and Maintenance
78. rt of this publication may be reprinted or translated in any form or by any means without prior written permission from Sartorius All rights reserved The status of the information specifications and illustrations in this manual is indicated by the date given below Sartorius reserves the right to make changes to the technology features specifications and design of the equipment without notice Date November 2012 Sartorius Weighing Technology GmbH Goettingen Germany Printed in Germany Printed on bleached chlorine free paper W_ Secura Quintix Practum BenHdb KT Publication No WSE6004 e12111
79. s Readability 0 1 mg 1 mg 10 mg 0 1 g and 1 g Draft shield v Y Weighing pan 90 mm Y Weighing pan 120 mm Y Weighing pan 180 mm Y Pan support Y v v Shield disk precision balances Y Pan draft shield Secura only Y AC adaptor with country specific power plug Y In use dust cover Dust cover Installation and operating instructions v dl Y Application Guide User Manual for Secura Quintix Practum Getting Started Installing the Balance Secura Models Balance with Draft Shield 0 8 User Manual for Secura Quintix Practum Install the following parts in the order listed In use dust cover Turn the draft shield lock to unlocked mf Put the draft shield 1 on the balance Note Use both hands to hold the top strut of the draft shield Move the side doors right to the back Turn the draft shield lock to locked i Put the shield disk 2 centering ring 3 pan support 4 and weighing pan 5 and draft ring 6 on the balance Note For information about how to clean the draft shield see the Care and Maintenance chapter for models with readability of 0 1 mg only Getting Started Inserting or Removing Glass Panels 1 Holding it by its rear edge pull the draft shield cover up and remove it 2 Push the three glass panels into the draft shield guide all the
80. s Secura and Quintix only ae Place the first component on the weighing pan gt The weight value is displayed Max 2100 g d 0 01 g 14 32 om To save the component select gt Remove the load from the balance Place the container for the second component on the weighing pan Select T to tare Place the second component on the weighing pan To save the component select gt gt The weight value is displayed isoCAL Max 2100 g d 0 01 g 32 59 g Component e 3 46 User Manual for Secura Quintix Practum Totalizing Components Secura and Quintix only Continue this procedure with additional components Nec To view the total weight select the Net button on the weighing display gt The total weight of all saved components is displayed Max 2100 g d 0 01 g 91 67 Component m 4 To switch back to view individual weights select the Sum button EL To exit the function select END gt The application returns to its original point Printing Results Prerequisites For printouts a Sartorius printer YDP40 or PC must be connected and configured see USB Port on page 72 gt Ifa printer is connected an additional button automatically appears at the top right of the display Select F to print the current value isoCAL Net gt When each component is saved their weight value is printed Comp 1 Com
81. s Setup Menu on page 24 6 Access the balance leveling function via electronic level indicator Secura only see Leveling with Electronic Level Indicator Secura on page 13 7 Access the calibration and adjustment menu see Calibrating and Adjusting the Balance on page 66 8 Switch the balance to standby mode Bw Enter figures on the keypad Numbers or values can be entered for many applications or system settings such as a minimum value for the Checkweighing application A keypad appears on the display which can be used for this purpose To enter numbers or values touch the corresponding numbers in order The entered numbers appear at the top of the display To correct the most recent number select The number is deleted Then enter the correct number To delete the entire value select C To confirm the entry select v User Manual for Secura Quintix Practum 21 Using the Balance isoCAL Max 2100 g d 0 01 g 0 00 um Accessing an Application in the Menu The right hand side of the display shows available applications for various weighing tasks which can be carried out with the balance You can scroll up and down through the menu to select the desired application To scroll through the menu place a finger on the display and drag it slowly up or down gt The symbols in the menu move in the corresponding direction Select a symbol to start t
82. s menu Language Set the display language here English is the default language see Setting the Language on page 19 The following languages are available English Deutsch German Francais French Espafiol Spanish Italiano Italian HB Japanese Pyccku Russian iMiB i255 Chinese Polski Polish Portugu s Portuguese SHh0 2E 8 Korean Date and Time Secura and Quintix only Set the date time and display format here Date menu option To set the date select enter the current date and confirm with X Date format menu option Choose how the date is displayed DD MMM YYYY Displayed in order of day month and then year MMNM DD YYYY Displayed in order of month day and then year YYYY MM DD ISO Displayed in order of year month and then day The time is given in 24 hour format when this setting is selected Time menu option To set the time select enter the current time and confirm with v Time format menu option Choose how the time is displayed 24h The time is displayed in 24 hour format This is the only possible setting when the date format is set to 1SO 12h AM PM The time is displayed in 12 hour format Times shown before noon are marked with AM and times shown after noon are marked with PM User Manual for Secura Quintix Practum 25 System Settings Setup Menu Device Information Devica mameta
83. s that are not approved by Sartorius Weighing Technology GmbH may void the authority granted to the user by the FCC to operate this equipment Warm up Time gt To ensure accurate results are delivered the balance must warm up for at least 30 minutes after initial connection to the power supply Only after this time will the device have reached the required operating temperature M When a verified balance of accuracy class for use in legal metrology is connected to the mains power it must warm up for at least one hour before operation User Manual for Secura Quintix Practum Ever G Leveling Q Please turn each foot in the direction of the arrow as shown Leveling O The balance has been leveled Getting Started Leveling The balance must be level to ensure precise weighing results Leveling the balance compensates for slant or unevenness at the place of installation by twisting the front leveling feet of the balance The balance needs to be re leveled and adjusted each time its setup location is changed The leveling function is different for the various balance models Electronic level indicator Secura only Conventional level indicator Quintix and Practum Leveling with Electronic Level Indicator Secura In Secura models the balance s position is checked with sensors Instructions on the display guide the user when leveling the balance gt When LEVEL appears in
84. scending order automatically as described in the Individual Identifiers chapter User Manual for Secura Quintix Practum 83 84 Status Messages Calibration Adjustment Error Messages The balance needs to when eCheck is required perform eCheck The balance needs to when isoCAL is required be adjusted The balance when leveling is required needs to be leveled Weight is too light when a weight that is too light is placed on the balance during external calibration Weight is too heavy when a weight that is too heavy is placed on the balance during external calibration Leveling Error Messages Leveling The balance must be leveled for balances with electronic level indicators only Balance Maintenance Error Messages Maintenance interval when the maintenance date set by Service has been ended exceeded Calibration Report Error Messages Calibration report data not found Not able to save cal adj data Cal adj log file could not be opened USB Devices Error Message The attached USB device is not supported User Manual for Secura Quintix Practum Transporting the Balance Transporting the Balance Please use the original packaging for shipping Packaging can be ordered through the Sartorius Service Center if required Prior to shipping switch the balance to standb
85. settings given in the menu are permitted SQmin menu option Secura only If the SQmin function is set up on the balance the function can be switched On or Off here see SQmin Minimum Weighing Secura only on page 37 Safety level menu option Secura only Select the desired safety level for SQmin isoCAL and LEVEL Low Information about display elements given in red Weighing is still possible Standard As with Low but the weight value is also displayed in gray and the warning symbol is shown The weight values are marked as not safe A warning appears after 60 seconds if the situation is ignored High factory setting As with Standard but the weight value in the applications cannot be printed out or saved if the value is smaller than the specified minimum initial weight SQmin 26 User Manual for Secura Quintix Practum System Settings Setup Menu Ambient conditions menu option P Choose whether the conditions at the balance location are Stable or Unstable If Unstable is selected adverse ambient conditions drafts vibrations are filtered by changing the measurement time for the weight values Application menu option Choose whether the balance will be used for Weighing or Dosing This setting is used to compensate for load fluctuations on the display Weighing The display responds very quickly to fast load changes The display responds more slowly to small changes in weight in the digit rang
86. sured individual weight of the sample select the Res button on the weighing display The individual weight of the sample is displayed isoCAL Factor 16 03335 To switch back to the calculated result select the G button again To exit the function select END gt The application returns to its original point There is an online animation for this application Click here to view it 56 User Manual for Secura Quintix Practum Unstable Condition Unstable Condition Purpose Use this application with moving samples such as live animals and for weighing in unstable environments A measurement cycle is automatically carried out with a defined number of measurements for each object to be weighed The individual measurements are averaged and this average is displayed as the result Select the Menu key in any application Select the Unstable condition symbol in the menu gt The Unstable condition application appears TT YET aeons The set number of measurements is displayed under Measurements 0 00 m To set the number of measurements and other settings select the gray button Unstable condition The Unstable condition settings window appears On the left enter the number of measurements Select a value or select enter the desired value and confirm with v Select the degree of instability of movement in the middle e g for the starting criterion of the measurement
87. th hazardous materials ABC contamination either for repair or disposal Detailed information with service addresses for returning your device for repair or disposal can be found on our website www sartorius com or requested from a Sartorius Service Center User Manual for Secura Quintix Practum 93 Specifications Specifications General Data AC Adaptor Sartorius AC adaptor module 6971790 with interchangeable country specific plug in AC adaptors Primary 100 240 V 10 10 50 60 Hz 0 2 A Secondary 15 V DC 5 530 mA max 8 Watt max 0 to 40 C and 15 V DC 5 330 mA max 5 Watt max 0 to 50 C Other data protection class Il in accordance with EN IEC 60950 1 up to 3000 m above sea level 1P40 as per EN TEC 60529 Balance Power supply only via Sartorius AC adaptor module 6971790 Input voltage 12 0 18 0 V DC Power consumption Ambient Conditions 2 W typically The specifications apply when the following ambient conditions are in place Environment for indoor use only Ambient temperature 10 C to 30 C Operational capacity guaranteed between 5 C and 45 C 45 C Storage and shipping 10 C to 60 C Elevation up to 3000 m above sea level Relative humidity 15 to 80 for temperatures up to 31 C non condensing decreasing linearly to 50 relative humidity at 40 C and 20 at 50 C Safety of ele
88. ual to the weight of the fluid the body displaces Percentage see page 52 This application is used to determine the percentage share or the percentage difference of the sample related to a reference weight Conversion Secura and Quintix only see page 55 Use this application to multiply the weight value by a user defined factor The selected factor is saved to protected memory Unstable condition see page 57 Use this application with moving samples such as live animals and for weighing in unstable environments A measurement cycle is automatically carried out with a defined number of measurements for each object to be weighed The individual measurements are averaged and this average is displayed as the result Checkweighing see page 59 Use this application to check whether a weight value falls within the specified tolerances This application also makes it easy to fill sample materials to a specified target weight Peak hold see page 61 Use this application to calculate the maximum weight value of a sample peak value The value remains on the display for five seconds after the sample has been removed from the balance Example Use for measuring release force during an experiment or use when a load is so big that the balance display is hidden from view during weighing Counting see page 63 Use this application to determine the number of parts of approximately equal weight The weight of a counted reference sample
89. ult depending s 0 1 0 2 0 1 0 2 0 1 0 2 on the set filter level Weighing pan size mm 180 180 180 Net weight approx kg 4 7 4 7 4 7 Practum Model 224 1x 124 1x 313 1x 213 1x 2102 1x 1102 1x 612 1x 5101 1x 5100 1x Accuracy class Type 2 SQP A SQP A SQP B SQP B SQP D SQP D SQP D SQP E SQP E Max g 220 120 310 210 2100 1100 610 5 100 5 100 Scale interval d mg 0 1 0 1 1 1 10 10 10 100 1 000 Verification scale interval e mg 1 1 10 10 100 100 100 1 000 1 000 Min mg 10 10 20 20 500 500 500 5 000 50 000 Tare subtractive lt 100 of the max weighing capacity Typical stabilization time S 4 4 3 3 3 3 3 3 3 Weighing pan size mm 90 90 120 120 180 180 180 180 180 Weighing chamber height mm 209 209 209 209 Net weight approx kg 4 5 4 5 4 9 4 9 3 1 3 1 3 1 3 1 3 1 1 Possible terms for country specific models x CEU x CEU Verified balances with EC Type Approval Certificate D12 09 014 for EU except France Italy and Switzerland x CFR Verified balances with EC Type Approval Certificate D12 09 014 for France only x CIT Verified balances with EC Type Approval Certificate D12 09 014 for Italy only x CCH Verified balances with EC Type Approval Certificate D12 09 014 for Switzerland only x NUS NTEP Certificate for USA x CN CMC Type Approval Certificate for China x OJP Balance with Type Approval Certificate for Japan x OBR Balance with Type Approval Certificate for Brazil
90. uthorized personnel from making changes to the system settings of the balance When a user password is set all functions which could change the metrological behavior of the balance are locked Select p gt Enter a number as a password To make corrections to the entry button Delete individual characters C button delete all characters Enter the password again to ensure correct entry Confirm with v The new password will only be applied after returning to the first level of the menu vv To change the password the old password must first be entered A new password can then be set To completely delete the password and use the balance without password protection leave the entry blank Contact the Sartorius Service Center if you forget the password Reset settings menu option Reset all balance settings to the factory default settings here When the prompt appears select Yes reset and confirm with The balance is reset and restarts USB mass storage menu option Use this function to register the balance memory as a USB removable data carrier on a PC This function is required by the Sartorius Service Center or when installing the PC driver for the virtual COM port Further information can be found in Chapter USB Port on page 72 Enable service mode menu option This function is used by the Sartorius Service Center and can only be accessed by authorized Service Center personnel The
91. wise and the right leveling foot clockwise Check the level indicator after each adjustment and correct if necessary Complete the leveling by calibrating the balance User Manual for Secura Quintix Practum Getting Started Below balance Weighing A port for a below balance weighing hook is located on the bottom of the balance Install a draft protection shield Lift cover plate out of the bottom of the balance When doing this put the balance to one side and not on the weighing A pan side Placing the balance on the weighing pan side may lead to measurement inaccuracies and damage to the balance Attach a wire or similar to the sample and hang it on the notched hook e If the below balance weighing port is no longer being used close the opening with the cover plate again so that the weighing results are not adversely affected by drafts M The below balance weighing port may not be opened or used on balances used for legal metrology User Manual for Secura Quintix Practum 15 Getting Started Anti theft Locking Device P A Kensington key lock cable can be installed at the fastening point on the back of the balance if required gt The balance can also be secured in place at the installation location with a chain or lock for example 16 User Manual for Secura Quintix Practum Moving the Balance Moving the Balance Moving the Balance over Sh
92. y and display the updated intermediate result 12 03 Component 5 To exit the function select END The application returns to its original point There is an online animation for this application Click here to view it O d User Manual for Secura Quintix Practum Purpose Example isoCAL Max 2100 g d 0 01 g l 0 00 um Components Bd Totalizing Components Secura and Quintix only Totalizing Components Secura and Quintix only Totalize weight values You can save up to 99 components This allows you to save components that must be weighed in various containers Each container can be tared before each component is weighed You have a formula the components of which should not be mixed together immediately Use this application to weigh individual components in different containers print out the results and check the total weight at any time Select the Menu key in any application Select the Components symbol in the menu gt The Components application appears To change settings select the gray button gt The Components settings window appears Choose whether the individual weights of the components are printed out Select Y to confirm vv Select O lt to zero the balance if necessary Place the container for the first component on the weighing pan Select T to tare User Manual for Secura Quintix Practum 45 Totalizing Component
93. y mode see previous page and Avoid glass breakage shocks and vibrations Never lift or carry the balance when holding it by its draft shield A then pull the plug Secura Models Balance with Draft Shield gt Remove the following parts from the balance Draft ring 1 for models with readability of 0 1 mg Weighing pan 2 Pan support 3 Centering ring 4 for models with readability of 0 1 mg Shield disk 5 Remove glass panels from the draft shield 6 See next chapter Care and Maintenance Quintix and Practum Models gt Remove the following parts from the balance Weighing pan 1 Pan support 2 Shield disk 3 Remove glass panels from the draft shield 4 See next chapter Care and Maintenance User Manual for Secura Quintix Practum 85 86 Transporting the Balance User Manual for Secura Quintix Practum Turn the draft shield lock to unlocked p gt Next remove the draft shield from the balance Insert the bottom part of the packaging into the box Place the following parts into the bottom part of the packaging Draft shield Balance Base plate Side panels Top glass cover Insert the respective weighing pan and pan support into the opening shown in the image to the left A Weighing pan and pan support with a diameter o

Secura®, Quintix®, Practum® - Laboratory

Contents

Download Pdf Manuals

Related Search

Related Contents

Secura&reg;, Quintix&reg;, Practum&reg; - Laboratory

Contents

Download Pdf Manuals

Related Search

Related Contents

Secura®, Quintix®, Practum® - Laboratory