Home

Z97 Pro3 Z97 Pro3

1. Z97 Pro3 User Manual Version 1 0 Published April 2014 Copyright 2014 ASRock INC All rights reserved Copyright Notice No part of this documentation may be reproduced transcribed transmitted or translated in any language in any form or by any means except duplication of documentation by the purchaser for backup purpose without written consent of ASRock Inc Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies and are used only for identification or explanation and to the owners benefit without intent to infringe Disclaimer Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice and should not be constructed as a commitment by ASRock ASRock assumes no responsibility for any errors or omissions that may appear in this documentation With respect to the contents of this documentation ASRock does not provide warranty of any kind either expressed or implied including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose In no event shall ASRock its directors officers employees or agents be liable for any indirect special incidental or consequential damages including damages for loss of profits loss of business loss of data interruption of business and the like eve
2. tRDRDDR Configure between module read to read delay from different ranks tRDRDDD Use this to change DRAM tRWSR Auto Manual settings The default is Auto tWRRD Configure between module write to read delay tWRRDDR Configure between module write to read delay from different ranks tWRRDDD Use this to change DRAM tRRSR Auto Manual settings The default is Auto Configure between module write to read delay from different DIMMs tWRWR Configure between module write to write delay tWRWRDR Configure between module write to write delay from different ranks tWRWRDD Configure between module write to write delay from different DIMMs tRDWR Configure between module read to write delay tRDWRDR Configure between module read to write delay from different ranks tRDWRDD Configure between module read to write delay from different DIMMs RTL CHA Configure round trip latency for channel A Z97 Pro3 RTL CHB Configure round trip latency for channel B IO L CHA Configure IO latency for channel A lO L CHB Configure IO latency for channel B ODT WR CHA Configure the memory on die termination resistors WR for channel A ODT WR CHB Configure the memory on die termination resistors WR for channel B ODT NOM CHA Use this to change ODT CHA Auto Manual settings The default is Auto ODT NOM CHB Use this to change ODT CHB Auto Manual settings The default is Aut
3. Dehumidifier Duration Configure the duration of the dehumidifying process before it returns to 4 S5 State Dehumidifier CPU Fan Setting Configure the speed of the CPU fan while Dehumidifier is enabled The higher the value the faster the fan speed Max 255 Min 1 Save User Default Type a profile name and press enter to save your settings as user default Load User Default Load previously saved user defaults 93 94 4 6 Hardware Health Event Monitoring Screen This section allows you to monitor the status of the hardware on your system including the parameters of the CPU temperature motherboard temperature fan speed and voltage CPU Temperature WE Temperature CPU Fan 1 Speed Lear ature cat details wie OR code CPU Fan 1 amp 2 Setting Select a fan mode for CPU Fans 1 amp 2 or choose Customize to set 5 CPU temperatures and assign a respective fan speed for each temperature Chassis Fan 1 Setting Select a fan mode for Chassis Fan 1 or choose Customize to set 5 CPU temperatures and assign a respective fan speed for each temperature Chassis Fan 2 Setting Select a fan mode for Chassis Fan 2 or choose Customize to set 5 CPU temperatures and assign a respective fan speed for each temperature Over Temperature Protection When Over Temperature Protection is enabled the system automatically shuts down when the motherboard is overheated Z97 Pro3 4 7 Boot Screen T
4. 2F No 37 Sec 2 Jnongyang S Rd Beitou District Taipei City 112 Taiwan R O C ASRock EUROPE B V Bijsterhuizen 3151 6604 LV Wijchen The Netherlands Phone 31 24 345 44 33 Fax 31 24 345 44 38 ASRock America Inc 13848 Magnolia Ave Chino CA91710 U S A Phone 1 909 590 8308 Fax 1 909 590 1026
5. 84 4 4 5 Intel Smart Connect Technology Intel Smart Connect Technology Intel Smart Connect Technology automatically updates your email and social networks such as Twitter Facebook etc while the computer is in sleep mode 4 4 6 Super lO Configuration A OL Tweaker Advanced Super 10 Configuration Wt details vie OF come PS2 Y Cable Enable the PS2 Y Cable or set this option to Auto Serial Port Enable or disable the Serial port Serial Port Address Select the address of the Serial port 85 86 4 4 7 ACPI Configuration Suspend to RAM Select disable for ACPI suspend type S1 It is recommended to select auto for ACPI S3 power saving Check Ready Bit Enable to enter the operating system after S3 only when the hard disk is ready this is recommended for better system stability ACPI HPET Table Enable the High Precision Event Timer for better performance and to pass WHQL tests PS 2 Keyboard Power On Allow the system to be waked up by a PS 2 Keyboard PCI Devices Power On Allow the system to be waked up by a PCI device and enable wake on LAN Wake From Onboard LAN Allow the system to be waked up by the onboard LAN Z97 Pro3 Ring In Power On Allow the system to be waked up by onboard COM port modem Ring In signals RTC Alarm Power On Allow the system to be waked up by the real time clock alarm Set it to By OS to let it be handled by your operating sys
6. CPU OC Fixed Mode CPU OC fix mode allows you to keep the max CPU ratio as your setting without throttling Please note that overclocking may cause damage to your CPU and motherboard It should be done at your own risk and expense Intel SoeedStep Technology Intel SpeedStep technology allows processors to switch between multiple frequen cies and voltage points for better power saving and heat dissipation Intel Turbo Boost Technology Intel Turbo Boost Technology enables the processor to run above its base operating frequency when the operating system requests the highest performance state Filter PLL Frequency CPU BCLK Filter Frequency Choose 1 6 for better overclocking capabilities Long Duration Power Limit Configure Package Power Limit 1 in watts When the limit is exceeded the CPU ratio will be lowered after a period of time A lower limit can protect the CPU and save power while a higher limit may improve performance Z97 Pro3 Long Duration Maintained Configure the period of time until the CPU ratio is lowered when the Long Duration Power Limit is exceeded Short Duration Power Limit Configure Package Power Limit 2 in watts When the limit is exceeded the CPU ratio will be lowered immediately A lower limit can protect the CPU and save power while a higher limit may improve performance Primary Plane Current Limit Configure the current limit of the CPU under Turbo Mode in ampere A lower limit can
7. 00 MHz BOUCPOE Frequency 10000 MMs OURadS sdti CPU Cache Ravo 34 FAN amp TEMPERATURE CPU Temperature 40C 104F HB Tesperatere 29C BSF CPU Fant Speed P52 RPM Chassis Faal Speed S4 RPH VOLTAGE CPU iteut vot 1747 V Vcore volt 1209 y 35V vor 3326 3 0V vor 3040 2V Volt 2036 Vcore Overrice Volt 1270 Vcore Voltage Adcipone l Oftser 0 001 CPU Cache Override Volt 270 CPU Cache Volt Offret 0001 V Syttem Agent Volt Offset 0001 CPU Analog 10 Volt Offset 0001 CPU Digital 10 Volt Oftcer ORAM vonage 80 y PCH 105V Vorage 1 422 POH 1 SV Voltage 499 y 32 Z97 Pro3 Live Update Check for newer versions of BIOS or drivers NORartk s tadar ate fase Corwer Live Update Current Version Latest Version Server ASIA Y v NF Onver oD rive 434 HOA ve App E 4 Rag tage Te v er ntel Smart Connect e 3 6 AP ner ge Statut Kile Tech Service Contact Tech Service if you have problems with your computer Please leave your contact information along with details of the problem MoORactk gt 4 Tech Service User Information Problem Information Name Venyeh gt Sutpect Tech Service Form Test Teste Phone 0173456709 Problem Type Others v Language Engilish Country Taiwan Mal ABSACOM Descripson 10 ASR Technical Support Test Purchase Date lt amp 10 2014 p 18 Us Serial Number 0123 456789 Tacerneacas noaaepaxa Monata enon FIAT bF Ab attach Gales AE MAME WABANE
8. 10 No 10 SATA3_4 see p 10 No 13 SATA3_5 see p 10 No 12 see p 10 No 16 SATA3_4 SATA3_2 SATA3_0 SATA3_5 SATA3_3 SATA3_ These six SATA3 connectors support SATA data cables for internal storage devices with up to 6 0 Gb s data transfer rate USB 2 0 Headers 9 pin USB2_3 see p 10 No 17 9 pin USB4_5 see p 10 No 18 USB_PWR P USB_PWR Besides two USB 2 0 ports on the I O panel there are two headers on this motherboard Each USB 2 0 header can support two ports USB 3 0 Header Vbus Besides four USB 3 0 Vbus IntA_PB_SSRX 19 pin USB3_4_5 IntA_PA_SSRX IntA_PB_SSRX ports on the I O panel IntA_PA_SSRX GND see p 10 No 6 GND IntA_PB_SSTX there is one header on this IntA_PA_SSTX IntA_PB_SSTX IntA_PA_SSTX GND motherboard Each USB GND IntA_PB_D Inta_PA_D IntA_PB_D 3 0 header can support IntA_PA_D Dummy 1 two ports Front Panel Audio Header This header is for ND ears 9 pin HD_AUDIO1 E Ta see p 10 No 23 OUT2_L J_SENSE OUT2_R MIC2 R MIC2 L connecting audio devices to the front audio panel Q Z97 Pro3 High Definition Audio supports Jack Sensing but the panel wire on the chassis must support HDA to function correctly Please follow the instructions in our manual and chassis manual to install your system 2 Ifyou use an AC 97 audio panel please install it to the front panel audio header by the steps below A C
9. Ads Texmnuscher Support Test Remove 33 34 Settings Configure ASRock A Tuning Click to select Auto run at Windows Startup if you want A Tuning to be launched when you start up the Windows operating system NCRactk Settings Z97 Pro3 3 3 Intel Rapid Start Technology Intel Rapid Start Technology enables your system to wake up faster from deep sleep saving time and power consumption Feel secure to know that your system will resume to working condition even if an unexpected power loss happens while the PC is in sleep mode 3 3 1 System Requirements s Confirm whether your motherboard supports this feature Operating system Microsoft Windows 8 1 8 7 32 or 64 bit edition Set the SATA mode to AHCI If Windows 8 1 8 7 is already installed under IDE mode directly changing the SATA mode to AHCI may cause Windows 8 7 to crash while booting If your system is not in AHCI mode please follow the instructions below WW There are certain risks Please backup any important data before operating to avoid loss 1 Press Win R simultaneously in Windows 8 7 type Regedit into the word box then click OK Type the name of a program folder document or Internet resource and Windows will open it for you Cancel Browse 2 Enter into HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet services msahci in Windows Registry Editor Double click on the value Start and change the value from 3 into 0 C
10. CHA_FAN2 8 SATA3 Connector SATA3_1 9 SATA3 Connector SATA3_0 10 SATA3 Connector SATA3_ 3 11 SATA3 Connector SATA3_2 12 SATA3 Connector SATA3_5 13 SATA3 Connector SATA3_4 14 Chassis Fan Connector CHA_FANI1 15 System Panel Header PANEL 16 Power LED Header PLED1 17 USB 2 0 Header USB2_ 3 18 USB 2 0 Header USB4_5 19 TPM Header TPMS1 20 Chassis Speaker Header SPEAKER1 21 Clear CMOS Jumper CLRCMOS1 22 COM Port Header COM1 23 Front Panel Audio Header HD_AUDIOI1 24 CPU Fan Connector CPU_FAN1 25 PCIe Power Connector PCIE_PWR1 26 CPU Fan Connector CPU_FAN2 1 5 I O Panel 0 9 O 8 No Description No Description j USB 2 0 Ports USB01 8 Microphone Pink 2 D Sub Port 9 Central Bass Orange 3 LAN RJ 45 Port 10 USB 3 0 Ports USB3_23 4 Side Speaker Gray 11 USB 3 0 Ports USB3_01 5 Rear Speaker Black 12 DVI D Port 6 Line In Light Blue 13 HDMI Port 7 Front Speaker Lime 14 PS 2 Mouse Keyboard Port 12 Z97 Pro3 There are two LEDs on each LAN port Please refer to the table below for the LAN port LED indications ACT LINK LED SPEED LED LAN Port Activity Link LED Speed LED Status Description Status Description 10Mbps connection Data Activity 100Mbps connection 1Gbps conn
11. Guard Count Configure the number of attempts to boot until the system automatically restores the default settings CSM Compatibility Support Module IE Hain A Mer 4 Boot CSMifompatibility Support Module Launch PE Opn0M policy Launch Video OoR0H policy Wt details via OF come CSM Enable to launch the Compatibility Support Module Please do not disable unless youre running a WHCK test If you are using Windows 8 1 8 64 bit and all of your devices support UEFI you may also disable CSM for faster boot speed Z97 Pro3 Launch PXE OpROM Policy Select UEFI only to run those that support UEFI option ROM only Select Legacy only to run those that support legacy option ROM only Do not launch Launch Storage OpROM Policy Select UEFI only to run those that support UEFI option ROM only Select Legacy only to run those that support legacy option ROM only Do not launch Launch Video OpROM Policy Select UEFI only to run those that support UEFI option ROM only Select Legacy only to run those that support legacy option ROM only Do not launch 97 98 4 8 Security Screen In this section you may set or change the supervisor user password for the system You may also clear the user password Supervisor Password Set or change the password for the administrator account Only the administrator has authority to change the settings in the UEFI Setup Utility Leave it blank and press enter to remove the pas
12. No 2 This motherboard pro vides an 8 pin ATX 12V power connector To use a 4 pin ATX power supply please plug it along Pin 1 and Pin 5 PCIe Power Connector 4 pin PCIE_PWRI1 see p 10 No 25 DETECT GND 12V FY Please connect a 4 pin molex power cable to this connector when more than three graphics cards are installed Serial Port Header RRKDI 9 pin COMI DDSR 1 see p 10 No 22 CCTS 1 RRI 1 RRTS 1 DOCD 1 This COM1 header supports a serial port module TPM Header 17 pin TPMS1 see p 10 No 19 GND PCICLK FRAME PCIRST SMB_CLK_MAIN SMB_DATA_MAIN LAD2 LADI LAD3 3V LADO GND S_PWRDWN SERIRQ GND 3VSB GND Z97 Pro3 This connector supports Trusted Platform Module TPM system which can securely store keys digital certificates passwords and data A TPM system also helps enhance network security protects digital identities and ensures platform integrity 27 28 Chapter 3 Software and Utilities Operation 3 1 Installing Drivers The Support CD that comes with the motherboard contains necessary drivers and useful utilities that enhance the motherboard s features Running The Support CD To begin using the support CD insert the CD into your CD ROM drive The CD automatically displays the Main Menu if AUTORUN is enabled in your computer If the Main Menu does not appear automatically locate and double click on
13. Power design 4 Power Phase design Supports Intel Turbo Boost 2 0 Technology Supports Intel K Series unlocked CPUs Supports ASRock BCLK Full range Overclocking Intel Z97 Dual Channel DDR3 Memory Technology 4x DDR3 DIMM Slots Supports DDR3 2933 OC 2800 OC 2400 OC 2133 OC 1866 OC 1600 1333 1066 non ECC un buffered memory Max capacity of system memory 32GB see CAUTION Supports Intel Extreme Memory Profile XMP 1 3 1 2 1 x PCI Express 3 0 x16 slot PCIE2 x16 mode 3 x PCI Express 2 0 x1 Slots 2 x PCI Slots Graphics Audio LAN Z97 Pro3 Intel HD Graphics Built in Visuals and the VGA outputs can be supported only with processors which are GPU integrated Supports Intel HD Graphics Built in Visuals Intel Quick Sync Video with AVC MVC S3D and MPEG 2 Full HW Encodel Intel InTru 3D Intel Clear Video HD Technology Intel Insider Intel HD Graphics 4400 4600 Pixel Shader 5 0 DirectX 11 1 Max shared memory 1792MB Three graphics output options D Sub DVI D and HDMI Supports Triple Monitor Supports HDMI with max resolution up to 1920x1200 60Hz Supports DVI D with max resolution up to 1920x1200 60Hz Supports D Sub with max resolution up to 1920x1200 60Hz Supports Auto Lip Sync Deep Color 12bpc xvYCC and HBR High Bit Rate Audio with HDMI Port Compliant HDMI monitor is required Supports HDCP with DVI D and HDMI Ports Supports Full HD 1080p Blu ray BD pla
14. button on the main taskbar Style Show a start button on secondary taskbars if any Control How should the taskbar appear Disable taskbar translucency Desktop About Where should search look for files Search should include files outside the standard libraries How should the new Windows 8 features work Disable all Windows 8 hot corners when at the Desktop Disable charms bar when at the Desktop Disable top left hot corner when at the Desktop Y Disable bottom left hot corner when the taskbar overlaps it Hide Modern UI applications from the Windows 7 style menu Like our Facebook page and get W Automatically go to the Desktop when sign in 10 off your purchase of Start g5 Like Advanced Desktop allows you to disable the hot corners when you are working on the desktop It also lets you choose whether or not the system boots directly into desktop mode and bypass the Metro user interface About Displays information about Start8 63 64 Chapter 4 UEFI SETUP UTILITY 4 1 Introduction This section explains how to use the UEFI SETUP UTILITY to configure your system You may run the UEFI SETUP UTILITY by pressing lt F2 gt or lt Del gt right after you power on the computer otherwise the Power On Self Test POST will continue with its test routines If you wish to enter the UEFI SETUP UTILITY after POST restart the system by pressing lt Ctl gt lt Alt gt lt Delete gt or by pressing th
15. cycles required between the issuing of the precharge command and opening the next row Z97 Pro3 RAS Active Time tRAS The number of clock cycles required between a bank active command and issuing the precharge command Command Rate CR The delay between when a memory chip is selected and when the first active command can be issued Write Recovery Time tWR The amount of delay that must elapse after the completion of a valid write operation before an active bank can be precharged Refresh Cycle Time tRFC The number of clocks from a Refresh command until the first Activate command to the same rank RAS to RAS Delay tRRD The number of clocks between two rows activated in different banks of the same rank Write to Read Delay tWTR The number of clocks between the last valid write operation and the next read command to the same internal bank Read to Precharge tRTP The number of clocks that are inserted between a read command to a row pre charge command to the same rank Four Activate Window tFAW The time window in which four activates are allowed the same rank CAS Write Latency tCWL Configure CAS Write Latency tREFI Configure refresh cycles at an average periodic interval tCKE Configure the period of time the DDR3 initiates a minimum of one refresh command internally once it enters Self Refresh mode 71 72 tRDRD Configure between module read to read delay
16. image to visit the website of the selected news and know more 55 56 3 6 2 Apps When the Apps tab is selected you will see all the available apps on screen for you to download Installing an App Step 1 Find the app you want to install fSReck APP sHor a BIOS R Drivers Seting Lilarger a ASHIKE APP Cheer ger parar Esaier bhiis FET E UNSTOPPABLE SAMI NG Loeogle Chrome A fact timpla and tecure web browne ASG JTL Widodoey Fer qupperting HICK with apaiia Deeyrebrescis Iri reeds Ol beil Lanes e The most recommended app appears on the left side of the screen The other various apps are shown on the right Please scroll up and down to see more apps listed You can check the price of the app and whether you have already intalled it or not E The red icon displays the price or Free if the app is free of charge G The green Installed icon means the app is installed on your computer Step 2 Click on the app icon to see more details about the selected app Step 3 If you want to install the app click on the red icon EB to start downloading ANSRec APP sHoP amp BIOS amp Drivers Setting pack ASRock XFast LAN Step 4 When installation completes you can find the green Installed icon appears on the upper right corner MSReck APP sHop amp BIOS amp Drivers a Setting ASRock APP Charger r Cw vercion 106 ASRock APP Charger Ve
17. in with your Orbweb ME account and password Step 3 ab Tap the Power Options icon and power options appear Z97 Pro3 Tap to select Restart Sleep or Shutdown Ll 97 Performance suns Th C zZ97 Extremes aa Restart L 297 Extreme6 Shutdown YO A 1 Please be noted that if the host device is not WOW compatible the host status icon will turn offline and the power option icon will dissappear You have to physically wake up computer in order to bring power option icon back to online 2 The Intel Remote Wake Technology does not support remote wake up from shutd won S5 If you press Shutdown to remotely turn off the host computer please turn it on physically Using Remote Deskto Remote Desktop allows you to remotely access your host computer from a client device For Windows PC users Step 1 Go to Orbweb ME portal login page http orbweb me Step 2 Log in with your Orbweb ME account and password Step 3 R Click the Connect icon Step 4 Click on Remote Desktop If the Remote Desktop Connection dialog appears click Connect to continue 51 52 Step 5 Enter the Windows password to log in and you will see the desktop of your host computer Please refer to the user manual of the Kloudian Orbweb ME Professional for more instructions on how to use Orbweb ME Professional For iOS or Android Mobile Devices users Download and install Orbweb ME Professional app from the App Store iOS
18. off it will not cause data loss of the programs or files you were executing before entering sleep state When you wish to continue to use the computer just hit the power button the system will rapidly return to Windows the programs and files which you were using before entering sleep state will be accessible immediately 39 40 3 4 Intel Smart Connect Technology Intel Smart Connect Technology is a feature that periodically wakes your computer from Windows sleep state to refresh email or social networking applications It saves your waiting time and keeps the content always up to date 3 4 1 System Requirements Confirm whether your motherboard supports this feature Operating system Microsoft Windows 8 1 8 7 32 or 64 bit edition Set the SATA mode to AHCI If Windows 8 1 8 7 is already installed under IDE mode directly changing the SATA mode to AHCI may cause Windows 8 7 to crash while booting If your system is not in AHCI mode please follow the instructions below s There are certain risks Please backup any important data before operating to avoid loss 1 Press Win R simultaneously in Windows 8 7 type Regedit into the word box then click OK Type the name of a program folder document or Internet resource and Windows will open it for you Open 2 Enter into HKEY LOCAL MACHINE SYSTEM CurrentControlSet services msahci in Windows Registry Editor Double click on the value Start
19. or Play Store Android Step 1 Tap the Orbweb ME Professional app icon 0 to launch it Step 2 Log in with your Orbweb ME account and password Step 3 Tap the host computer name that you want to access under the Remote Desktop section Z297 Extrenved piangi Mi f AIT My Documents a My Musie Step 4 Enter the Windows password to log in and you will see the desktop of your host computer Z97 Pro3 Using Xplorer Xplorer allows you to remotely access documents on your host computer from a client device For Windows PC users Step 1 Go to Orbweb ME portal login page http orbweb me Step 2 Log in with your Orbweb ME account and password Step 3 Ra Click the Connect icon Step 4 Click on Xplorer Step 5 Root directory displays Click on a folder name to open the folder J Name A Type Size Date z E Documents Folder ae g E Music Folder one T Pictures Folder a I fF Videos Folder a Step 6 Click on a file name to preivew the file You can also delete rename move and copy a selected file For more instructions on how to use Xplorer refer to the user manual of the Kloudian Orbweb ME Professional 53 54 For iOS or Android Mobile Devices users Download and install Orbweb ME Professional app from the App Store iOS or Play Store Android Step 1 Tap the Orbweb ME Professional app icon D to launch it Step 2 Log in with your Orbweb ME account
20. protect the CPU and save power while a higher limit may improve performance GT Frequency Configure the frequency of the integrated GPU GT Voltage Mode Auto For optimized settings Adaptive Add voltage to the integrated GPU when the system is under heavy load Override The voltage is fixed GT Adaptive Voltage Configure the voltage added to the integrated GPU when the system is under heavy load GT Voltage Offset Configure the fixed voltage added to the integrated GPU DRAM Timing Configuration Load XMP Setting Load XMP settings to overclock the DDR3 memory and perform beyond standard specifications DRAM Reference Clock Select Auto for optimized settings DRAM Frequency If Auto is selected the motherboard will detect the memory module s inserted 69 70 and assign the appropriate frequency automatically DRAM Performance Mode Choose high performance mode to increase memory performance Use default settings for better system stability DRAM Configuration DRAM Tweaker Fine tune the DRAM settings by leaving marks in checkboxes Click OK to confirm and apply your new settings CAS Latency tCL The time between sending a column address to the memory and the beginning of the data in response RAS to CAS Delay tRCD The number of clock cycles required between the opening of a row of memory and accessing columns within it Row Precharge Time tRP The number of clock
21. upper right hand corner of the screen These chosen options will show up on My Favorites page in UEFI s ASRock UEFI Guide Need help to optimize your UEFI setting Got lost among UEFI pages Just select UEFI Guide The tutorial will explain every detailed setting and help you to cus tomize your UEFI easily Ea ASRock Instant Flash ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM This conve nient BIOS update tool allows you to update the system BIOS in a few clicks without preparing an additional floppy diskette or other complicated flash utility Just save the new BIOS file to your USB storage and launch this tool by pressing lt F6 gt or lt F2 gt during POST to enter the BIOS setup menu to access ASRock Instant Flash Please be noted that the USB flash drive or hard drive must use FAT32 16 12 file system eS ASRock Internet Flash ASRock Internet Flash downloads and updates the latest UEFI firmware version from our servers for you without entering Windows OS Please setup network configuration before using Internet Flash ASRock Crashless BIOS ASRock Crashless BIOS allows users to update their BIOS without fear of failing If power loss occurs during the BIOS updating process ASRock Crashless BIOS will automatically finish the BIOS update procedure after regaining power Please note that BIOS files need to be placed in the root directory of your USB disk Only USB 2 0 ports support t
22. IMM pairs 2 It is unable to activate Dual Channel Memory Technology with only one or three memory module installed 3 It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot otherwise this motherboard and DIMM may be damaged Dual Channel Memory Configuration 1 Populated Populated 2 Popea O O Popea 3 Populated Populated Populated Populated The DIMM only fits in one correct orientation It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation 19 Z97 Pro3 2 4 Expansion Slots PCI and PCI Express Slots There are 2 PCI slots and 4 PCI Express slots on the motherboard Before installing an expansion card please make sure that the power supply is switched off or the power cord is unplugged Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation PCI slots The PCI1 and PCI2 slots are used to install expansion cards that have 32 bit PCI interface PCle slots PCIE1 PCIe 2 0 x1 slot is used for PCI Express x1 lane width cards PCIE2 PCIe 3 0 x16 slot is used for PCI Express x16 lane width graphics cards PCIE3 PCIe 2 0 x1 slot is used for PCI Express x1 lane width cards PCIE4 PCIe 2 0 x1 slot is used for PCI Express x1 lane width cards 21 22 2 5 Jumpers Setup The illustration shows how jumpers are setup When the jumper
23. To Don t display this item v Control Panel Display as a link Default Programs Don t display this item 4 Advanced Like our Facebook page and get What should the power button do 10 off your purchase of Starts a5 Like Shut down Configure provides configuration options including icon sizes which shortcuts you want Start Menu to display quick access to recently used apps the functionality of the power button and more Control Start8 What should happen when you are on the Desktop Styl e Start button shows Start8 menu Windows key shows Start8 menu g on t ro V Show the Windows 8 menu when Ctrl click the Start button Y Show the Windows 8 menu when press the right windows key Desktop About What should happen when you are in a Modern UI app Windows key fades to desktop and shows Start8 menu wv Start menu hot corner should show Start8 menu Show the Windows 8 menu when press the right windows key Don t have a right windows key Ctrl Windows key simulates a right windows key press Shift Windows key simulates a right windows key press Like our Facebook page and get Holding the Windows key for half a second simulates the right Windows key 10 off your purchase of Start8 a Like 62 Z97 Pro3 Control lets you configure what a click on the start button or a press on the Windows key does Desktop Start8 Which taskbar should the start button appear on Show a start
24. Turbo You can use this option to increase your system performance This option appears only when your CPU supports this function This option appears only when you adopt K Series CPU Load Optimized CPU OC Setting You can use this option to load optimized CPU overclocking setting Please note that overclocking may cause damage to your CPU and motherboard It should be done at your own risk and expense This option appears only when you adopt K Series CPU Load Optimized GPU OC Setting You can use this option to load optimized GPU overclocking setting Please note that overclocking may cause damage to your GPU and motherboard It should be done at your own risk and expense This option appears only when you adopt K Series CPU 67 68 CPU Configuration CPU Ratio The CPU speed is determined by the CPU Ratio multiplied with the BCLK Increasing the CPU Ratio will increase the internal CPU clock speed without affecting the clock speed of other components CPU Cache Ratio The CPU Internal Bus Speed Ratio The maximum should be the same as the CPU Ratio BCLK PCIE Frequency The CPU speed is determined by the CPU Ratio multiplied with the BCLK Increasing the BCLK will increase the internal CPU clock speed but also affect the clock speed of other components Spread Spectrum Enable Spread Spectrum to reduce electromagnetic interference for passing EMI tests Disable to achieve higher clock speeds when overclocking
25. al that the system will postpone booting up after pressing the power button Z97 Pro3 89 90 44 9 Trusted Computing GRecH UEFI E Wain AOL Tweacer X Too GHH Koni tor Boat 4 Advanced Trusted Computing Configuration Information SLPPOAT TURHED OFF JTA interface will available Get details vie OR code Security Device Support Enable or disable BIOS support for security device Z97 Pro3 4 5 Tools SRecH UEFI Ci HiW Monitor LEFI Tech Easy RAID VEFL Update Utility Instant Flash Meteork Configuratian Dehumidifier Function Wt details via OF come Save Load User UEFI Setup Profile tov from Disk System Browser ASRock System Browser shows the overview of your current PC and the devices connected OMG Online Management Guard Administrators are able to establish an internet curfew or restrict internet access at specified times via OMG You may schedule the starting and ending hours of internet access granted to other users In order to prevent users from bypassing OMG guest accounts without permission to modify the system time are required UEFI Tech Service Contact ASRock Tech Service if you are having trouble with your PC Please setup network configuration before using UEFI Tech Service Easy RAID Installer Easy RAID Installer helps you to copy the RAID driver from the support CD to your USB storage device After copying the drivers please change the SATA mod
26. and change the value from 3 into 0 Click on OK Z97 Pro3 3 4 2 Setup Guide Installing ASRock Smart Connect Utility Step 1 Install ASRock Smart Connect Utility which is located in the folder at the following path of the Support CD ASRock Utility gt Smart Connect a Open T ASRock Utility SmartConnect v Search SmartConnect Pp Organize v New folder v E Recent places Name Date modified Type Size nis 9 Fi AsrSmartConnect 2 15 2012 6 20PM Application 1 g3 Libraries ea ee unins000 3 25 2013 3 36 PM _ Application 1 Documents a Music E Pictures E Videos jki Computer iy Local Disk C amp Local Disk D es Removable Disk ese DVD Drive F AS wy eS gt Fiensme S ee a cone Step 2 Once installed run ASRock Smart Connect from your desktop or go to Windows Start gt All Programs gt ASRock Utility E ASRock Intel Smart Connect ES intel Smart Connect Application List Smart Connect List 41 Step 3 Click the Add button Take Foxmail as an example add Foxmail to the Application list ee a IY Organize v Open New folder A Fr Favorites E Desktop i Downloads Recent Places Name wm r F Skin a Stationery d Template E BugReport Date modified 3 Z1 2UL2Z SUU FIV 3 21 2012 3 00 PM 3 21 2012 3 00 PM 3 21 2012 3 00 PM 1 10 2012 11 58 PM rile Tolger File folder File folder File f
27. and 2 contains the introduction of the motherboard and step by step installation guides Chapter 3 contains the operation guide of the software and utilities Chapter 4 contains the configuration guide of the BIOS setup content of this manual will be subject to change without notice In case any modifica tions of this manual occur the updated version will be available on ASRock s website without further notice If you require technical support related to this motherboard please visit our website for specific information about the model you are using You may find the latest VGA cards and CPU support list on ASRock s website as well ASRock website http www asrock com Q Because the motherboard specifications and the BIOS software might be updated the 1 1 Package Contents e ASRock Z97 Pro3 Motherboard ATX Form Factor e ASRock Z97 Pro3 Quick Installation Guide e ASRock Z97 Pro3 Support CD e 2x Serial ATA SATA Data Cables Optional e 1 xI O Panel Shield 1 2 Specifications Platform ATX Form Factor All Solid Capacitor design High Density Glass Fabric PCB Unique ASRock Super Alloy Feature Premium Alloy Choke Reduces 70 core loss compared to iron powder choke NexFET MOSFET Sapphire Black PCB ASRock Full Spike Protection ASRock Cloud ASRock APP Shop CPU Chipset Memory Expansion Slot Supports 4 Gen amp 5 Generation Intel Core Processors Socket 1150 Digi
28. and password Step 3 R Tap the Connect icon Step 4 Tap a folder name under the Xplorer section and you can see the files in this folder Z97 Extreme Tap a file name to preivew the file You can also delete rename move and copy a selected file For more instructions on how to use Xplorer refer to the user manual of the Kloudian Orbweb ME Professional Tutorial Video Z97 Pro3 3 6 ASRock APP Shop The ASRock APP Shop is an online store for purchasing and downloading software applications for your ASRock computer You can install various apps and support utilities quickly and easily and optimize your system and keep your motherboard up to date simply with a few clicks Double click on your desktop to access ASRock APP Shop utility You need to be connected to the Internet to download apps from the ASRock APP Shop 3 6 1 Ul Overview Category Panel Hot News BIOS amp Drivers LETAT ESETI i Google Chrome ASRock APP Charges A fast simple and secure web browser r Dewniceds 1934 Information Panel Category Panel The category panel contains several category tabs or buttons that when selected the information panel below displays the relative information Information Panel The information panel in the center displays data about the currently selected category and allows users to perform job related tasks Hot News The hot news section displays the various latest news Click on the
29. cap is placed on the pins the jumper is Short If no jumper cap is placed on the pins the jumper is Open The illustration shows a 3 pin jumper whose pinl and pin2 are Short when a jumper cap is placed on these 2 pins t w G amp Short Open Clear CMOS Jumper 12 2_3 CLRCMOSI Co C0 see p 10 No 21 Default Clear CMOS CLRCMOS1 allows you to clear the data in CMOS To clear and reset the system parameters to default setup please turn off the computer and unplug the power cord from the power supply After waiting for 15 seconds use a jumper cap to short pin2 and pin3 on CLRCMOSI for 5 seconds However please do not clear the CMOS right after you update the BIOS If you need to clear the CMOS when you just finish updating the BIOS you must boot up the system first and then shut it down before you do the clear CMOS action Please be noted that the password date time and user default profile will be cleared only if the CMOS battery is removed Z97 Pro3 2 6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers Do NOT place jumper caps over AN these headers and connectors Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard System Panel Header PLED E R 9 pin PANELI PWRBTN see p 10 No 15 switch reset switch and system status indicator on CND the chassis to this header RESET according to the pin HDLED as
30. d damage from static electricity to the motherboard s components NEVER place your motherboard directly on a carpet Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components Hold components by the edges and do not touch the ICs Whenever you uninstall any components place them on a grounded anti static pad or in the bag that comes with the components When placing screws to secure the motherboard to the chassis please do not over tighten the screws Doing so may damage the motherboard 2 1 Installing the CPU Ww 1 Before you insert the 1150 Pin CPU into the socket please check if the PnP cap is on the socket if the CPU surface is unclean or if there are any bent pins in the socket Do not force to insert the CPU into the socket if above situation is found Otherwise the CPU will be seriously damaged 2 Unplug all power cables before installing the CPU Z97 Pro3 15 Z97 Pro3 Please save and replace the cover if the processor is removed The cover must be placed if you wish to return the motherboard for after service 17 2 2 Installing the CPU Fan and Heatsink Z97 Pro3 2 3 Installing Memory Modules DIMM This motherboard provides four 240 pin DDR3 Double Data Rate 3 DIMM slots and supports Dual Channel Memory Technology 1 For dual channel configuration you always need to install identical the same brand speed size and chip type DDR3 D
31. e reset button on the system chassis You may also restart by turning the system off and then back on Because the UEFI software is constantly being updated the following UEFI setup screens and descriptions are for reference purpose only and they may not exactly match what you see on your screen 4 1 1 UEFI Menu Bar The top of the screen has a menu bar with the following selections Main For setting system time date information OC Tweaker For overclocking configurations Advanced For advanced system configurations Tool Useful tools H W Monitor Displays current hardware status Boot For configuring boot settings and boot priority Security For security settings Exit Exit the current screen or the UEFI Setup Utility Z97 Pro3 4 1 2 Navigation Keys Use lt gt key or lt gt key to choose among the selections on the menu bar and use lt gt key or lt gt key to move the cursor up or down to select items then press lt Enter gt to get into the sub screen You can also use the mouse to click your required item Please check the following table for the descriptions of each navigation key Navigation Key s Description To change option for the selected items lt Tab gt Switch to next function lt PGUP gt Go to the previous page lt PGDN gt Go to the next page lt HOME gt Go to the top of the screen lt END gt Go to the bottom of the screen lt F1 gt To display the General Help Screen lt F7
32. e to RAID then you can start installing the operating system in RAID mode Easy Driver Installer For users that don t have an optical disk drive to install the drivers from our support 91 92 CD Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver to your system via an USB storage device then downloads and installs the other required drivers automatically Instant Flash Save UEFI files in your USB storage device and run Instant Flash to update your UEFI Internet Flash ASRock Internet Flash downloads and updates the latest UEFI firmware version from our servers for you Please setup network configuration before using Internet Flash For BIOS backup and recovery purpose it is recommended to plug in your USB pen drive before using this function Network Configuration Use this to configure internet connection settings for Internet Flash E Hair AU Tweater dj Too We teork Conf guration I Download Server Get details via OR code Internet Setting Enable or disable sound effects in the setup utility UEFI Download Server Select a server to download the UEFI firmware Dehumidifier Function Z97 Pro3 If Dehumidifier Function is enabled the computer will power on automatically to dehumidify the system after entering 4 S5 state Dehumidifier Period Configure the period of time until the computer powers on and enables Dehumidifier after entering 4 S5 state
33. ection If you use a 2 channel speaker please connect the speaker s plug into Front Speaker Jack See the table below for connection details in accordance with the type of speaker you use Audio Output FrontSpeaker RearSpeaker Central Bass Line In Channels No 7 No 5 No 9 No 6 2 V 4 V V 6 V V V 8 V V V V To enable Multi Streaming you need to connect a front panel audio cable to the front Q panel audio header After restarting your computer you will find the Mixer tool on your system Please select Mixer ToolBox LJ click Enable playback multi streaming and click ok Choose 2CH 4CH 6CH or 8CH and then you are allowed to select Realtek HDA Primary output to use the Rear Speaker Central Bass and Front Speaker or select Realtek HDA Audio 2nd output to use the front panel audio 13 14 Chapter 2 Installation This is an ATX form factor motherboard Before you install the motherboard study the configuration of your chassis to ensure that the motherboard fits into it Pre installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings Make sure to unplug the power cord before installing or removing the motherboard components Failure to do so may cause physical injuries and damages to motherboard components In order to avoi
34. gt Discard changes and exit the SETUP UTILITY lt F9 gt Load optimal default values for all the settings lt F10 gt Save changes and exit the SETUP UTILITY lt F12 gt Print screen lt ESC gt Jump to the Exit Screen or exit the current screen 65 66 4 2 Main Screen When you enter the UEFI SETUP UTILITY the Main screen will appear and display the system overview Active Page on Entry Full HO LEFI Favorite Display your collection of BIOS items Press F5 to add remove your favorite items Active Page on Entry Select the default page when entering the UEFI setup utility Full HD UEFI When Auto is selected the resolution will be set to 1920 x 1080 if the monitor supports Full HD resolution If the monitor does not support Full HD resolution then the resolution will be set to 1024 x 768 When Disable is selected the resolution will be set to 1024 x 768 directly UEFI Guide UEFI Guide is a quick tutorial for ASRock s UEFI setup Utility You may abort the tutorial by pressing ESC Z97 Pro3 4 3 OC Tweaker Screen In the OC Tweaker screen you can set up overclocking features mg Duration Power Limit Long Duration Maintained Short Duration Power Limit Primary Plane Current Limit Because the UEFI software is constantly being updated the following UEFI setup screens and descriptions are for reference purpose only and they may not exactly match what you see on your screen Advanced
35. his feature aN ASRock OMG Online Management Guard Administrators are able to establish an internet curfew or restrict internet access at specified times via OMG You may schedule the starting and ending hours of internet access granted to other users In order to prevent users from bypassing OMG guest accounts without permission to modify the system time are required Wea ASRock UEFI System Browser ASRock System Browser shows the overview of your current PC and the devices connected Z97 Pro3 XX ASRock UFFI Tech Service Contact ASRock Tech Service by sending a support request from the UEFI setup utility if you are having trouble with your personal computer Users may try to choose the category of the issue they have encountered describe the problem in detail and then attach an optional picture or log file for our technical support team Wir Ea ASRock Dehumidifier Function Users may prevent motherboard damages due to dampness by enabling Dehumidifier Function When enabling Dehumidifier Function the computer will power on automatically to dehumidify the system after entering 4 S5 state ASRock Easy RAID Installer ASRock Easy RAID Installer can help you to copy the RAID driver from the support CD to your USB storage device After copying the RAID driver to your USB storage device please change SATA Mode to RAID then you can start installing the OS in RAID mode low ASRock Easy Driver Instal
36. his section displays the available devices on your system for you to configure the boot settings and the boot priority AddOn ROM Display Boot Failure Guard Hoot Failure Guard Count COM Compatibility Support Module Fast Boot Fast Boot minimizes your computer s boot time In fast mode you may not boot from an USB storage device Ultra Fast mode is only supported by Windows 8 1 8 and the VBIOS must support UEFI GOP if you are using an external graphics card Please notice that Ultra Fast mode will boot so fast that the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows Boot From Onboard LAN Allow the system to be waked up by the onboard LAN Setup Prompt Timeout Configure the number of seconds to wait for the setup hot key Bootup Num Lock Select whether Num Lock should be turned on or off when the system boots up Boot Beep Select whether the Boot Beep should be turned on or off when the system boots up Please note that a buzzer is needed 95 96 Full Screen Logo Enable to display the boot logo or disable to show normal POST messages AddOn ROM Display Enable AddOn ROM Display to see the AddOn ROM messages or configure the AddOn ROM if you ve enabled Full Screen Logo Disable for faster boot speed Boot Failure Guard If the computer fails to boot for a number of times the system automatically restores the default settings Boot Failure
37. ion of the dehumidifying process USB Key Plug in the USB Key and let your computer log in to windows automatically OC DNA OC DNA is an unique software which helps to save your OC settings as a profile Then you can send this OC setting profile to the friends Disk Health Report Disk Health Report is a hard disk health monitoring utility that displays detailed HDD information such as hard disk model serial number firmware power on count power on hours S M A R T values current temperature etc HDD SSD and optical disk drives are all supported The health status block displays Good in green color Caution in yellow color or Bad in red color Click on the health status icon to configure settings for an alert to be triggered 31 OC Tweaker Configurations for overclocking the system MERocthi OC Tweaker wv visom cx PCIL Freque tcy rp PU Cache Ratio 44 Voltage p put Voltage Oft re nge mous Adaptive Mode e Overnde gr e tage A si Otter tegt Moce Acantive Mane System Info CPU Freg 1500 00 Matz mt y Cache Freq 150000 May m DRAH Fieg 1600 00 Ht ee ty v E T Overrise Mose y ay y E eris Mnie Ano apply when program starts System Info View information about the system The System Browser tab may not appear for certain models fORactk i x System Information Hardware Monitor CLOCK CPU Frequency 4400
38. is computer in the screen to begin Step 2 Click Folder Settings tab and the default shared folders display To add a folder click EM Select a folder to add it into Orbweb ME Then click Save anera Folder Settings Download List of folders accessible from Orbweb ME Name Path Ra Documents C Users Documents im Media D Media ia Music C Users Music P Pictures C Users Pictures iy Videos C Users Videos Ea sct You can access the documents in these shared folders on the host computer remotely through Xplorer from your client device Z97 Pro3 REMOTE ACCESS FROM A CLIENT DEVICE AN The lastest version of Java is required to be installed to use the Remote Desktop and Xplorer functions Using Remote Wake U Remote Wake Up allows you to remotely put your host computer to sleep and wake your host computer up from a client device If you use a motherboard with dual LAN ports please disable one of the LAN ports AN to use the Remote Wake Up function To do so go to Control Panel gt Network and Sharing Center gt Manage Network Connections right click Local Area Connections and select Disable For Windows PC users Step 1 Go to Orbweb ME portal login page http orbweb me Step 2 Log in with your Orbweb ME account and password Step 3 Find the host computer from the list by the computer name you give Status Version Computer Connect Subscription Properties Host Status Host Computer Name C
39. l Spike Protection 1 x USB 3 0 Header Supports 2 USB 3 0 ports Supports ESD Protection ASRock Full Spike Protection 64Mb AMI UFFI Legal BIOS with multilingual GUI support ACPI 1 1 Compliant wake up events SMBIOS 2 3 1 support CPU DRAM PCH 1 05V Voltage multi adjustment Support CD Hardware Monitor Os Certifica tions Z97 Pro3 Drivers Utilities AntiVirus Software Trial Version Google Chrome Browser and Toolbar Start8 30 days trial Kloudian Orbweb ME Professional Win 8 1 CPU Chassis temperature sensing CPU Chassis Power Fan Tachometer CPU Chassis Quiet Fan Auto adjust chassis fan speed by CPU temperature CPU Chassis Fan multi speed control Voltage monitoring 12V 5V 3 3V CPU Vcore Microsoft Windows 8 1 32 bit 8 1 64 bit 8 32 bit 8 64 bit 7 32 bit 7 64 bit FCC CE WHOL ErP EuP ready ErP EuP ready power supply is required For detailed product information please visit our website http www asrock com Please realize that there is a certain risk involved with overclocking including adjust AN ing the setting in the BIOS applying Untied Overclocking Technology or using third party overclocking tools Overclocking may affect your system s stability or even cause damage to the components and devices of your system It should be done at your own risk and expense We are not responsible for possible damage caused by overclocking Due to limitation the actual memo
40. l machine monitor better utilize hardware by improving application compatibility and reliability and providing additional levels of manageability security isolation and I O performance PCIE2 Link Speed Select the link speed for PCIE2 Share Memory Configure the size of memory that is allocated to the integrated graphics processor when the system boots up IGPU Multi Monitor Select disable to disable the integrated graphics when an external graphics card is installed Select enable to keep the integrated graphics enabled at all times Render Standby Power down the render unit when the GPU is idle for lower power consumption 79 80 Onboard HD Audio Enable disable onboard HD audio Set to Auto to enable onboard HD audio and automatically disable it when a sound card is installed Front Panel Enable disable front panel HD audio On Off Play With ASRock On Off Play users can connect their portable audio devices such as an MP3 player or a mobile phone to the PC and listen to music through the computer s speakers even when the computer is turned off Onboard HDMI HD Audio Enable audio for the onboard digital outputs Onboard LAN Enable or disable the onboard network interface controller Deep Sleep Configure deep sleep mode for power saving when the computer is shut down Restore on AC Power Loss Select the power state after a power failure If Power Off is selected the power will remain
41. ler For users that don t have an optical disk drive to install the drivers from our support CD Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver to your system via an USB storage device then downloads and installs the other required drivers automatically 1 4 Motherboard Layout s 225 m EERE S a z g D PWR_FAN1 LULL 2 a noe ATX12V1 C lt lep x gt o o o o HIERE d E E E E HU g lt g lt sll all alla o o o o Tt T t tT USB 3 0 N N N N T USB0 _ Pi pe _ B USB1 F 2 is S t Tt t Tt oO o o Ke Sf al Ea F ali lt il alla X wl e a z 4 Q Q fa Q A a a Q A 26 x ow 70 E JEE PCIE_PWR1 lt 3 ao 2 5 El CHA_FAN2 O38 f 297 Pro3 ft 24 CPU_FAN1 PCIE1 o fH i a E ASRock J LAN PCIE2 PCI Express 3 0 Front USB 3 0 CMOS E 64Mb Battery BIOS RoHS PCIE3 n t e a Super 7 PCIE4 uo HD_AUDIO1 23 TELE PCI1 PCI2 USB4_5 USB2_3 COM1 let EPEE oros mmn rat EAT GE mere To Gee E cm ih il il SATA3_5 i i 10 SATA3_0 SATA3_2 SATA3_4 10 11 12 13 14 Z97 Pro3 No Description 1 Power Fan Connector PWR_FANI 2 ATX 12V Power Connector ATX12V1 3 2x240 pin DDR3 DIMM Slots DDR3_A1 DDR3_B1 4 2x240 pin DDR3 DIMM Slots DDR3_A2 DDR3_B2 5 ATX Power Connector ATXPWRI 6 USB 3 0 Header USB3_4_5 7 Chassis Fan Connector
42. lick on OK 35 36 Registry Edito File Edit View Favorites Help p J Mo25Svc Name Type Data gt T as ab Default REG_SZ value not set pe MegaSR ab DriverPackageld REG_SZ mshdc inf_amd64_neutral_a69a58a4286f0b22 Pa ErrorControl REG_DWORD 0x00000003 3 ab Group REG_SZ SCSI Miniport p J monitor b i mouclass ab ImagePath REG_EXPAND_SZ system32 drivers msahci sys Edit DWORD 32 bit Value Tag REG_DWORD Type REG_DWORD o H b Ji mouhid fo Start REG_DWORD v z 3 gt J mountmgr x i mpo yl p B mpsdry b B MpsSvc p d MRxDAV p i mnsmb D i mrxsmb10 b i mrxsmb20 D h msahci p J msdsm b MSDTC b J MSDTC Bri b Msfs wo J mshidkmd a Computer HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet services msahci 3 Exit the Registry Editor window and restart the computer 4 Press F2 to enter BIOS then go to Advanced gt Storage Configuration and change SATA Mode to AHCI Press F10 to save changes and exit 5 Enter Windows 8 7 Windows will discover the new device and install AHCI drivers automatically 3 3 2 Setup Guide Configuring Rapid Start Step 1 Run ASRock Rapid Start utility from Start gt All Programs gt ASRock Utility Step 2 If you have more than one hard drives in your system you must select one then choose the Partition Size desired for your hidden partition and click on Create The system will automatically create a hidden partitio
43. m is suspended sleeping this can cause an impact to battery life Please make sure you turn off your wireless device during air travel to conform to FAA regulations Also Note Before placing your system in standby sleep make sure that internet applications which you would like updated like Windows Live Mail Outlook and Seesmic are running Using Smart Connect 1 Keep the applications which you wish to connect to the internet and receive updates while the system is in sleep state running Foxmail for instance keep Foxmail running 2 Click on Windows Start gt the arrow next to Shut down and click on Sleep 3 Windows system will enter sleep state 43 44 The system will wake up from sleep state periodically and then start to update Foxmail The screen will not display anything so the computer can maintain minimum power usage Afterwards the system will automatically return to sleep state again Upon waking up the system you will find the new mail that were sent to you during sleep state are already updated and ready to be read in Foxmail Z97 Pro3 3 5 ASRock Cloud ASRock partners with Kloudian to make your mobile devices connect to your PC seamlessly Have you ever been in a situation where you emergently needed certain files in your computer however the computer was gazillion miles away out of reach ASRock Cloud includes several technologies and software solutions for remotely controlli
44. n according to your settings If there are SSD s installed into your system it is recommended to create the partition on the SSD Z97 Pro3 intel Rapid Start Disk 0 OOAADS 00S9B Step 3 When prompted to restart after the setup click Yes to reboot Step 4 Double click the Intel Rapid Start Technology Manager icon fj in the Windows system tray 37 Step 5 Make sure Rapid Start is on Drag the slider to configure the time For example if the timer value is set to ten minutes the system will enable Rapid Start mode after entering sleep state for ten minutes If the timer is set to 0 minutes Windows will immediately enable Rapid Start mode as it enters sleep state Intel Rapid Start Technology Manager Status Intel Rapid Start Technology Hide Adwanced Settings Advanced Settings Critical Battery On Timer On 10 Minutes Using Rapid Start 1 You may shut down the computer without terminating the applications or files you are executing currently Click on Windows Start gt the arrow next to Shut down and click on Sleep Switch USET Log off Lock Restart Sleep 2 Windows system will enter sleep state 3 According to your settings in Rapid Start Technology Manager the system will automatically wake up and enable Rapid Start mode after entering sleep 38 Z97 Pro3 state for a period of time The power of the computer in Rapid Start mode can be cut
45. n if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product C This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CALIFORNIA USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate a toxic substance controlled in Perchlorate Best Management Practices BMP regulations passed by the California Legislature When you discard the Lithium battery in California USA please follow the related regulations in advance Perchlorate Material special handling may apply see www dtsc ca gov hazardouswaste perchlorate ASRock Website http www asrock com The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HOM HIGH DEFINITION MULTIMEDIA INTERFACE Contents Chapter 1 Introduction 1 1 1 2 1 3 1 4 1 5 Package Contents Specifications Unique Features Motherboard Layout I O Panel Chapter 2 Installation 2 1 2 2 2 3 2 4 2 5 2 6 Installing the CPU Installing the CPU Fan and Heatsink Installing Memory Modules DIMM Expansion Slots PCI and PCI Expres
46. ng capabilities Voltage Configuration CPU Input Voltage Configure the voltage for the CPU CPU Load Line Calibration CPU Load Line Calibration helps prevent CPU voltage droop when the system is under heavy load DRAM Voltage Use this to configure DRAM Voltage Z97 Pro3 PCH 1 05V Voltage Chipset 1 05V Voltage Use default settings for best performance 75 76 4 4 Advanced Screen In this section you may set the configurations for the following items CPU Configuration Chipset Configuration Storage Configuration Intel Rapid Start Technology Intel Smart Connect Technology Super IO Configuration ACPI Con figuration USB Configuration and Trusted Computing Tweaker Chipset Configuration Bescriotion figuration aid Start Techn logy CPU Configuration Parameters art Connect Technology Trusted Computing Get details vie OF com Setting wrong values in this section may cause the system to malfunction Z97 Pro3 4 4 1 CPU Configuration SRecH UEFI Too GRH Monitor Intel SHE Technology 64 bit Wt details vie OF come state Active Processor Cores Select the number of cores to enable in each processor package CPU C States Support Enable CPU C States Support for power saving It is recommended to keep C3 C6 and C7 all enabled for better power saving Enhanced Halt State C1E Enable Enhanced Halt State C1E for lower power consumption CPU C3 State Sup
47. ng your computer even if the computer is in off mode For ASRock motherboards with a Intel LAN chip ASRock Cloud allows users to remotely wake up their computers via the internet by using a secondary device such as a smartphone or tablet Users may use Kloudian Orbweb ME Professional to remotely wake up and control their computers or they could wake up the computer then use any other preferred remote desktop application This motherboard supports Remote Wake Technology with the onboard Intel LAN so you can connect with your PC from anywhere in the world You will be able to power your PC on or turn it off monitor and take control of it remotely with another smartphone tablet or computer 45 3 5 1 Intel Remote Wake Technology Intel Remote Wake Technology allows you to wake up and remote control your home computer from sleep state Before configuring this feature verify the followings on your host computer Make sure that the PCIE Devices Power On is enabled in UEFI SETUP UTILITY gt Advanced gt ACPI Configuration The UEFI screen is for reference only The actual screen may differ by model e Make sure that the Remote Wake is enabled in Intel Smart Connect Technology Manager Intel Smart Connect Technology Keep Data Fresh ae Remote Wake m Intel Remote Wake is supported on Windows 8 or Windows 8 64bit OS 46 Z97 Pro3 3 5 2 Configuring and Using Orbweb ME Professional Kloudian O
48. o Command Tri State Enable for DRAM power saving MRC Fast Boot Enable Memory Fast Boot to skip DRAM memory training for booting faster DIMM Exit Mode Select Slow Exit to reduce power consumption or Fast Exit for better performance FIVR Configuration FIVR Switch Frequency Signature Select whether to boost or lower the FIVR Switch Frequency FIVR Switch Frequency Offset Configure the percentage of frequency boost or deduction Vcore Override Voltage Add voltage to the Vcore when the system is under heavy load 73 74 Vcore Voltage Additional Offset Configure the dynamic Vcore voltage added to the Vcore CPU Cache Override Voltage Add voltage to the CPU Cache when the system is under heavy load CPU Cache Voltage Offset Configure the voltage for the CPU Cache Setting the voltage higher may increase system stability when overclocking System Agent Voltage Offset Configure the voltage for the System Agent Setting the voltage higher may increase system stability when overclocking CPU Analog IO Voltage Offset CPU I O Analog Voltage CPU Digital IO Voltage Offset CPU I O Digital Voltage CPU Integrated VR Faults Disable FIVR Faults to raise the threshold to trigger CPU over current protection and over voltage protection for better overclocking capabilities CPU Integrated VR Efficiency Mode Enable FIVR Efficiency Management for power saving Disable for better performance and overclocki
49. off when the power recovers If Power On is selected the system will start to boot up when the power recovers Good Night LED By enabling Good Night LED the Power HDD LEDs will be switched off when the system is on It will also automatically switch off the Power and Keyboard LEDs when the system enters into Standby Hibernation mode 4 4 3 Storage Configuration SATA Controller s Enable disable the SATA controllers SATA Mode Selection IDE For better compatibility AHCI Supports new features that improve performance RAID Combine multiple disk drives into a logical unit AHCI Advanced Host Controller Interface supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advan tages SATA Aggressive Link Power Management SATA Aggressive Link Power Management allows SATA devices to enter a low power state during periods of inactivity to save power It is only supported by AHCI mode 81 82 Hard Disk S M A R T S M A R T stands for Self Monitoring Analysis and Reporting Technology It is a monitoring system for computer hard disk drives to detect and report on various indicators of reliability D i Tweaker Advanced Intel R Rapid Start Technology Wt details via OF come Intel Rapid Start Technology Intel Rapid Start Technology is a new zero power hibernation mode which allows users to resume in just 5 6 seconds 83
50. older Application Libraries E Foxmail Ea Documents 4 CP FoxmailLiveUpdate s KTN E FoxmailUAC ae fete E3 FoxmailUpdateHook 1 10 2012 11 58 PM Application Ef Videos m3 uninst 1 10 2012 11 58 PM Application vR Foxmail Date modified 1 10 2012 11 58 PM Date created 3 21 2012 2 54 PM F Application Size 720 KB 1 10 2012 11 58 PM Application 1 10 2012 11 58 PM Application 1 10 2012 11 58 PM_ Application Step 4 Select Foxmail from the Application List then click the arrow pointing right to add this application to the Smart Connect List 4 ASRock Intel Smart Connec Esee X intel Smart Connect Application List Smart Connect List Step 5 Click Apply to enable Smart Connect 42 Z97 Pro3 Step 6 Double click the Intel Smart Connect Technology Manager icon in the Windows system tray Step 7 Drag the slider to configure how often the system will connect to the network to download updates Shorter durations will provide more frequent updates but may cause more power consumption Intel Smart Connect Technology Settings a pasie Advanced info X Enable Always Updated LL R R ee Reset All to Defaults Enable Remote Wake Will update approximately every 15 minutes when your computer is asleep More Less Frequent am Frequent Updates Updates User Note Enabling this service provides for periodic application data updates from the internet while your syste
51. onnect Mic_IN MIC to MIC2_L B Connect Audio_R RIN to OUT2_R and Audio_L LIN to OUT2_L C Connect Ground GND to Ground GND D MIC_RET and OUT_RET are for the HD audio panel only You don t need to connect them for the AC 97 audio panel E To activate the front mic go to the FrontMic Tab in the Realtek Control panel and adjust Recording Volume Chassis Speaker Header DUMMY SPEAKER Please connect the chassis 4 pin SPEAKERI1 1 ISISIS speaker to this header see p 10 No 20 oe een Chassis and Power Fan Please connect fan cables Connectors i to the fan connectors and 4 pin CHA_FANI1 i match the black wire to see p 10 No 14 4 pin CHA_FAN2 see p 10 No 7 FAN_SPEED_CONTROL GND 12V FAN_SPEED FAN_SPEED_CONTROL the ground pin A O N 3 pin PWR_FANI FAN_SPEED 112V see p 10 No 1 GND 25 26 CPU Fan Connectors 4 pin CPU_FAN1 see p 10 No 24 GND 12V FAN_SPEED FAN_SPEED_CONTROL GND FAN_VOLTAGE FAN_SPEED A O N 3 pin CPU_FAN2 see p 10 No 26 This motherboard pro vides a 4 Pin CPU fan Quiet Fan connector If you plan to connect a 3 Pin CPU fan please connect it to Pin 1 3 ATX Power Connector 12 24 pin ATXPWR1 see p 10 No 5 This motherboard pro vides a 24 pin ATX power connector To use a 20 pin ATX power supply please plug it along Pin 1 and Pin 13 ATX 12V Power 8 5 Connector 8 pin ATX12V1 see p 10
52. onnect Power Options Host Properties Current Version Number Online Green B Ready to Connect Blue l Online Blue Offline Gray Unable to Connect Gray Q Wakable Red Z Wakeable mode 49 50 Step 4 Click and power options appear Click to select Restart Sleep or Shut Down Status Version Computer Connect Plan Subscription Properties a a Restart T 11 t oi a a oe sleep meer AO te Shut Down Select Restart from the options to restart your host computer remotely When you select Sleep if the host device is WOW Wake On Wan compatible you can put your host computer to sleep S3 S4 The host status in the Status column shows offline and ready to be awaked and the power option shows wakable To wake up the computer click O Please be noted that if the host device is not WOW compatible the host status icon will turn offline and the power option icon will disappear You have to physically wake up computer in order to bring power option icon back to online If you select Shut Down you can turn off your computer remotely However the Intel Remote Wake Technology does not support remote wake up from shutdwon S5 Please physically turn on your host computer For iOS or Android Mobile Devices users Download and install Orbweb ME Professional app from the App Store iOS or Play Store Android Step 1 Tap the Orbweb ME Professional app icon 0 to launch it Step 2 Log
53. port Enable C3 sleep state for lower power consumption CPU C6 State Support Enable C6 deep sleep state for lower power consumption CPU C7 State Support Enable C7 deep sleep state for lower power consumption Package C State Support Enable CPU PCIe Memory Graphics C State Support for power saving 77 78 CPU Thermal Throttling Enable CPU internal thermal control mechanisms to keep the CPU from overheat ing No Execute Memory Protection Processors with No Execution Memory Protection Technology may prevent certain classes of malicious buffer overflow attacks Intel Virtualization Technology Intel Virtualization Technology allows a platform to run multiple operating systems and applications in independent partitions so that one computer system can function as multiple virtual systems Hardware Prefetcher Automatically prefetch data and code for the processor Enable for better performance Adjacent Cache Line Prefetch Automatically prefetch the subsequent cache line while retrieving the currently requested cache line Enable for better performance Z97 Pro3 4 4 2 Chipset Configuration i UEFI X Tool EAW Monitor TGP Bul ti Bondi ter Render Standby nboard HO Audio Front Panel OnOtf Flay Onboard HOA HD Audio nboard LAM mt details vie OF code Primary Graphics Adapter Select a primary VGA VT d Intel Virtualization Technology for Directed I O helps your virtua
54. r 1 00 ae et Vila gci x To uninstall it simply click on the trash can icon W The trash icon may not appear for certain apps 58 Upgrading an App You can only upgrade the apps you have already installed When there is an available new version for your app you will find the mark of New Version v sts appears below the installed app icon ASReck APP sHop it Apps 2 BIOS S rivers Seting ASH APP Gh pe peme Epika Me age up your ev a ve ZTBP a i r ma AsH JTL Undo A fact umpe and tecture wet bioan m T Chi wai the igan ira UNSTOPPABLE Loogle Lhrome Oremos 1934 Step 1 Click on the app icon to see more details Step 2 Click on the yellow icon Wei to start upgrading 3 6 3 BIOS amp Drivers Installing BIOS or Drivers When the BIOS amp Drivers tab is selected you will see a list of recommended or critical updates for the BIOS or drivers Please update them all soon ASReck APP sHop amp HOS amp Orven i Setting Latest Varsi 2101 i0 2 OBE Step 1 Please check the item information before update Click on J to see more details Step 2 Click to select one or more items you want to update Step 3 Click Update to start the update process 59 60 3 6 4 Setting In the Setting page you can change the language select the server location and determine if you want to automatically run the ASRock APP Shop on Windows start
55. r computer foRactk q ee on r Operation Mode Performance Mode Standard Mode Power Saving 29 30 Tools Various tools and utilities MCoRechK mp Tools TA 4 Acceleration LifeStyle XFest RAM OME MP ast LAN Ga Nig t LEO XFast RAM Boost the system s performance and extend the HDD s or SDD s lifespan Create a hidden partition then assign which files should be stored in the RAM drive XFast LAN Boost the speed of your internet connection Select a specific mode for making the designated program s priority highest Fast Boot Fast Boot minimizes your computer s boot time Please note that Ultra Fast mode is only supported by Windows 8 1 8 and the VBIOS must support UEFI GOP if you are using an external graphics card OMG Schedule the starting and ending hours of Internet access granted to other users Place X marks on the time table to disable the Internet Good Night LED Switch off the Power HDD LEDs when the system is on and automatically switch off the Power and Keyboard LEDs when the system enters into Standby Hibernation mode Z97 Pro3 FAN Tastic Tuning Configure up to five different fan speeds using the graph The fans will automatically shift to the next speed level when the assigned temperature is met Dehumidifier Prevent motherboard damages due to dampness Enable this function and configure the period of time until the computer powers on and the durat
56. rbweb ME Professional is a remote control software allowing you to easily access and control the remote host installed with the Orbweb ME Professional host software Installing Orbweb ME Professional on the Host Computer You can find the Orbweb ME Professional host software in the Support CD or just download it from http orbweb me Step 1 Click on the Orbweb ME Professional installer package file to start installation Step 2 Follow the onscreen instructions to complete the installation Step 3 When installation completes reboot the computer Signing Up for Host Computer Registration Step 1 Double click the Orbweb ME Professional icon va on your desktop Step 2 On the Orbweb ME Portal login page click Sign Up to create an Orbweb ME account and name your host computer Orbweb ME Your PC Anytime Anywhere n Remote access from anywhere a SignUp tog Se English Privacy 47 Step 3 You will receive a verification email Follow the steps in the email to verify your account After verifying your account you can access your PC through web browsers at http orbweb me On the Account Verified page if you click Go to My Computers you will see the Orbweb ME portal page as a client Setting Up Shared Folders on Host Computer Step 1 Double click the Orbweb ME Professional icon a on your desktop Or if you just finished signing up for your host computer you can click Configure th
57. re for users to download on the mainpage of APP Shop You can eas ily optimize your system and keep your motherboard up to date with a few clicks ASRock A Tuning A Tuning is ASRock s multi purpose software suite with a new interface more new features and improved utilities or ASRock Disk Health Report Displaying detailed HDD information You can check the model names capacities temperatures SMART info health status and other information of your HDDs here Lats ASRock USB Key In a world where time is money why waste precious time everyday typing usernames to log in to Windows Why should we even bother memorizing those foot long passwords Just plug in the USB Key and let your computer log in to windows automatically Z97 Pro3 O ASRock APP Charger Simply by installing the ASRock APP Charger makes your iPhone iPad iPod Touch charge up to 40 faster than before on your computer ASRock APP Charger allows you to quickly charge many Apple devices simultaneously and even supports continuous charging when your PC enters into Standby mode S1 Suspend to RAM S3 hibernation mode S4 or power off S5 Ei ASRock XFast LAN ASRock XFast LAN provides faster internet access which includes the benefits listed below LAN Application Prioritization You can configure your application s priority ideally and add new programs to the list Lower Latency in Game After setting online game s priority higher it can lo
58. ry size may be less than 4GB for the reservation ig for system usage under Windows 32 bit operating systems Windows 64 bit operat ing systems do not have such limitations You can use ASRock XFast RAM to utilize the memory that Windows cannot use 1 3 Unique Features Super Alloy ASRock Super Alloy This motherboard is specially designed with Super Alloy Technology for faster sta bler and more durable performance including Premium Alloy Choke NexFET MOSFET and Sapphire Black PCB ASRock Full Spike Protection A technology consists of 3 unique features Surge Protection Lightning Protection and ESD Protection By adding specialized ICs and reworking circuits the onboard USB ports LAN ports and MOSFETs in critical areas are all well protected from surges spikes and electrostatic discharge amp ASRock Cloud ASRock partners with Kloudian to make your mobile devices connect to your PC seamlessly ASRock Cloud allows you to get connected with your PC s files music photos and video clips remotely with tablets anytime anywhere OrbWeb ME is provided by a third party Restriction may apply and the offer is subject to change termina tion or discontinuation by the third party without prior notice Please visit the website for further details http www asrock com feature cloud index html ASRock APP Shop ASRock APP Shop is designed for your convenience We provide various apps and support softwa
59. s Slots Jumpers Setup Onboard Headers and Connectors Chapter 3 Software and Utilities Operation 3 1 3 2 3 3 3 4 3 5 3 6 3 6 1 3 6 2 Installing Drivers A Tuning Intel Rapid Start Technology Intel Smart Connect Technology ASRock Cloud ASRock APP Shop Ul Overview Apps 12 14 15 19 21 22 23 28 28 29 35 40 45 55 55 56 3 6 3 3 6 4 3 7 BIOS amp Drivers Setting Start8 Chapter 4 UEFI SETUP UTILITY 4 1 4 1 1 4 1 2 4 2 4 3 4 4 4 4 1 4 4 2 4 4 3 4 4 4 4 4 5 4 4 6 4 4 7 4 4 8 4 4 9 4 5 4 6 4 7 4 8 4 9 Introduction UEFI Menu Bar Navigation Keys Main Screen OC Tweaker Screen Advanced Screen CPU Configuration Chipset Configuration Storage Configuration Intel Rapid Start Technology Intel Smart Connect Technology Super IO Configuration ACPI Configuration USB Configuration Trusted Computing Tools Hardware Health Event Monitoring Screen Boot Screen Security Screen Exit Screen 59 60 61 64 64 64 65 66 67 76 77 79 81 83 84 85 86 88 90 91 94 95 98 99 Z97 Pro3 Chapter 1 Introduction Thank you for purchasing ASRock Z97 Pro3 motherboard a reliable motherboard produced under ASRock s consistently stringent quality control It delivers excellent performance with robust design conforming to ASRock s commitment to quality and endurance In this manual Chapter 1
60. signments below Note the positive and negative pins before connecting the cables PWRBTN Power Switch Connect to the power switch on the chassis front panel You may configure the way to turn off your system using the power switch RESET Reset Switch Connect to the reset switch on the chassis front panel Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart PLED System Power LED Connect to the power status indicator on the chassis front panel The LED is on when the system is operating The LED keeps blinking when the system is in S1 S3 sleep state The LED is off when the system is in S4 sleep state or powered off S5 HDLED Hard Drive Activity LED Connect to the hard drive activity LED on the chassis front panel The LED is on when the hard drive is reading or writing data The front panel design may differ by chassis A front panel module mainly consists of power switch reset switch power LED hard drive activity LED speaker and etc When connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 23 24 Power LED Header 3 pin PLEDI o PLED PLED Please connect the chassis power LED to this header to indicate the system s power status Serial ATA3 Connectors SATA3_0 see p 10 No 9 SATA3_1 see p 10 No 8 SATA3_2 see p 10 No 11 SATA3_ 3 see p
61. sword User Password Set or change the password for the user account Users are unable to change the settings in the UEFI Setup Utility Leave it blank and press enter to remove the password Secure Boot Enable to support Windows 8 1 8 Secure Boot 4 9 Exit Screen Discard Changes and Exit Discard Changes ood LEFI Defaults Save Changes and Exit When you select this option the following message Save configuration changes and exit setup will pop out Select OK to save changes and exit the UEFI SETUP UTILITY Discard Changes and Exit When you select this option the following message Discard changes and exit setup will pop out Select OK to exit the UEFI SETUP UTILITY without saving any changes Discard Changes When you select this option the following message Discard changes will pop out Select OK to discard all changes Load UEFI Defaults Load UEFI default values for all options The F9 key can be used for this operation Launch EFI Shell from filesystem device Copy shellx64 efi to the root directory to launch EFI Shell 99 100 Contact Information If you need to contact ASRock or want to know more about ASRock you re welcome to visit ASRock s website at http www asrock com or you may contact your dealer for further information For technical questions please submit a support request form at http www asrock com support tsd asp ASRock Incorporation
62. tem USB Keyboard Remote Power On Allow the system to be waked up by an USB keyboard or remote controller USB Mouse Power On Allow the system to be waked up by an USB mouse 8 88 4 4 8 USB Configuration USB Controller Enable or disable all the USB ports Intel USB 3 0 Mode Select Intel USB 3 0 controller mode Set Smart Auto to keep the USB 3 0 driver enabled after rebooting USB 3 0 is enabled in BIOS Set Auto to automatically enable the USB 3 0 driver after entering the OS USB 3 0 is disabled in BIOS Set Enabled to keep the USB 3 0 driver enabled Must install driver to use USB devices under Windows 7 Set Disabled to disable the USB 3 0 ports Legacy USB Support Enable or disable Legacy OS Support for USB 2 0 devices If you encounter USB compatibility issues it is recommended to disable legacy USB support Select UEFI Setup Only to support USB devices under the UEFI setup and Windows Linux operating systems only Legacy USB 3 0 Support Enable or disable Legacy OS Support for USB 3 0 devices If you encounter USB compatibility issues it is recommended to disable legacy USB support Select UEFI Setup Only to support USB devices under the UEFI setup and Windows Linux operating systems only USB Compatibility Patch If your USB devices i e USB mouse or storage encounter compatibility problems please enable this option to fix it Please note that after enabling this option it is norm
63. the file ASRSETUP EXE in the Support CD to display the menu Drivers Menu The drivers compatible to your system will be auto detected and listed on the support CD driver page Please click Install All or follow the order from top to bottom to install those required drivers Therefore the drivers you install can work properly Utilities Menu The Utilities Menu shows the application software that the motherboard supports Click on a specific item then follow the installation wizard to install it fix provided by Microsoft KB2720599 http support microsoft com kb 2720599 en us A To improve Windows 7 compatibility please download and install the following hot Z97 Pro3 3 2 A Tuning A Tuning is ASRock s multi purpose software suite with a new interface more new features and improved utilities including XFast RAM Dehumidifier Good Night LED FAN Tastic Tuning OC Tweaker and a whole lot more 3 2 1 Installing A Tuning When you install the all in one driver to your system from ASRock s support CD A Tuning will be auto installed as well After the installation you will find the icon A Tuning on your desktop Double click the A Tuning TA icon A Tuning B aian main menu will pop up 3 2 2 Using A Tuning There are six sections in A Tuning main menu Operation Mode Tools OC Tweaker System Info Live Update Tech Service and Settings Operation Mode Choose an operation mode for you
64. up MReck APP sHop m Apps lt BIOS amp Drivers Z97 Pro3 3 7 Start8 For those Windows 8 users who miss the Start Menu Start8 is an ideal solution that brings back the familiar Start Menu along with added customizations for greater efficiency 3 7 1 Installing Start8 Install Start8 which is located in the folder at the following path of the Support CD ASRock Utility gt Start8 3 7 2 Configuring Start8 Style Stars Which style of start menu would you prefer Style Configure Control ama ec Windows 7 Style Windows 8 style Desktop About Which theme do you want to use Windows T solid theme Windows 7 start menu solid theme v Like our Facebook page and get What should the Start button look like 10 off your purchase of Start8 a Like Flag Start8 Custom image Select between the Windows 7 style and Windows 8 style Start Menu Then select the theme of the Start Menu and customize the style of the Start icon 61 Configure Start8 What would you like to see on the menu Style W Use large icons Show recently used applications Open submenus when pause on them with the mouse pointer VY Highlight newly installed applications Show user picture Configure Control Allocate room for at least 10 large icons Desktop Which shortcuts do you want on the right hand side About Administrative Tools Don t display this item Computer Display as a link v Connect
65. wer the latency in games Traffic Shaping You can watch Youtube HD videos and download simultaneously Real Time Analysis of Your Data With the status window you can easily recognize which data streams you are currently transferring FEA ASRock XFast RAM ASRock XFast RAM is included in F Stream It fully utilizes the memory space that cannot be used under Windows 32 bit operating systems ASRock XFast RAM shortens the loading time of previously visited websites making web surfing faster than ever And it also boosts the speed of Adobe Photoshop 5 times faster Another advantage of ASRock XFast RAM is that it reduces the frequency of accessing your SSDs or HDDs in order to extend their lifespan Gy ASRock Restart to UEFI Windows 8 brings the ultimate boot up experience The lightning boot up speed makes it hard to access the UEFI setup ASRock Restart to UEFI allows users to enter the UEFI automatically when turning on the PC By enabling this function the PC will enter the UEFI directly after you restart ASRock Full HD UFFI All new Full HD UEFI with a resolution of 1920 x 1080 The UEFI should be de signed easy to use and setup With Full HD resolution now it is much easier and clearer for all users to setup optimize and update their BIOS ASRock My Favorites in UEFI Another handy design in ASRock UEFI You can select and add commonly used BIOS options to My Favorites by clicking the asterisk icon at the
66. yback with DVI D and HDMI Ports 7 1 CH HD Audio with Content Protection Realtek ALC892 Audio Codec Premium Blu ray Audio support Supports Surge Protection ASRock Full Spike Protection ELNA Audio Caps Gigabit LAN 10 100 1000 Mb s Giga PHY Intel 1218V Supports Intel Remote Wake Technology Supports Wake On LAN Supports Lightning ESD Protection ASRock Full Spike Protection Supports Energy Efficient Ethernet 802 3az Supports PXE Rear Panel 1 0 Storage Connector BIOS Feature 1 x PS 2 Mouse Keyboard Port 1 x D Sub Port 1 x DVI D Port 1 x HDMI Port 2 x USB 2 0 Ports Supports ESD Protection ASRock Full Spike Protection 4 x USB 3 0 Ports Supports ESD Protection ASRock Full Spike Protection 1 x RJ 45 LAN Port with LED ACT LINK LED and SPEED LED HD Audio Jacks Side Speaker Rear Speaker Central Bass Line in Front Speaker Microphone 6 x SATA3 6 0 Gb s Connectors support RAID RAID 0 RAID 1 RAID 5 RAID 10 Intel Rapid Storage Technology 13 and Intel Smart Response Technology NCQ AHCI and Hot Plug 1 x COM Port Header 1 x TPM Header 1 x Power LED Header 2 x CPU Fan Connectors 1 x 4 pin 1 x 3 pin 2 x Chassis Fan Connectors 2 x 4 pin 1 x Power Fan Connector 3 pin 1 x 24 pin ATX Power Connector 1 x 8 pin 12V Power Connector 1 x PCIe Power Connector 1 x Front Panel Audio Connector 2 x USB 2 0 Headers Support 4 USB 2 0 ports Supports ESD Protection ASRock Ful

Z97 Pro3 Z97 Pro3

Contents

Download Pdf Manuals

Related Search

Related Contents