Owner`s Manual - PatientLiftDeals.com
Contents
1. 5 866 FLAT WASHER SS 29 217 8X1 2X1 BTWBRNZ_ 7 8 OD X 1 2 ID X 1 8 TW BRNZ 35 2111 8X8 4X3 4FBBRNZ 1 1 8 OD X3 4 ID X 3 4 FLNG BRNG BZ SEAT ASSEMBLY PARTS LIST 6 AJSCREW 12X1PHSMS 12 1 PAN HD SHEET MTL SCRW 8 2ISCREW 12X1FHSMS 12 1 FLAT HEAD SCREW 55 9 2 BOLISTOXIHEXSS 5 1618 HEXBOLT 55 10 4 FLATWASHERS 168S 5 16 FLAT WASHER SS 19 PATRIOT AT PORTABLE CART PARTS LIST 871 6 22 20018 8 6 2 GUDEFRAMEASSY REVSONC 8 1 01 8 PORTABLECARTPLASTCQUARD 9 9006 1 4 20 X 1 2 BUTTON HD CS SS 1 4 20 X 1 2 HEX BOLT SS SET SCREW 1 4 X 1 1 4 316 SS 1 4 20 X 3 1 2 HEX BOLT SS 3 8 16 X 1 1 2 HEX BOLT SS 3 8 16 X 2 1 2 FLAT HD CS SS 3 8 16 FLAT HD CS SS 1 1 2 SQ BLACK PLUG PLASTIC 20 Aqua Creek Products LLC Limited Warranty Patriot AT Portable Lift Aqua Creek Products lifts have a Limited Lifetime Warranty on the frames not including the powder coat finish Aqua Creek Products LLC a k a Aqua Creek also warrants to the original end user that all non frame components manufactured by Aqua Creek when properly installed in accordance with assembly and installation instructions and properly used and maintained shall be free from defects in material and workmanship for a period of2. four 4 years from the date of original purchase provided that Aqua Creek receives prompt notice in writing of any defect or failure and satisfactory proof thereof with the following exceptions This warranty specifically excludes reimbursement for labor to remove repair or install the product and any return freight charges These warranties do not cover any damages due to accident misuse abuse negligence or failure to properly maintain any products or normal wear and tear from day to day operations In the event that any products are altered repaired or improperly installed or improperly used by anyone without the prior written approval by Aqua Creek all warranties are void IMPORTANT AMOUNT OF WEIGHT PLACED ON LIFT SHALL NOT EXCEED THE RATED LIFTING CAPACITY OF 450 POUNDS 204 kg FOR THE PATRIOT AT PORTABLE LIFT NEVER OPERATE THE LIFT UNDER LOAD IN A DRY POOL WITH NO WATER IN THE POOL To initiate a warranty claim the owner of an Aqua Creek product must provide the place of purchase in writing with a full description of the product its serial number the dates of purchase and installation and the exact nature of the defect Within thirty 30 days after receipt of a written warranty claim by Aqua Creek and barring any unforeseen delays the place of purchase will be notified of Aqua Creek s decision regarding the claim If requested by Aqua Creek any defective product must be returned freight prepaid to Aqua Creek s designated f
3. indicates that the battery 1s correctly seated The lift will not work 1f the battery 1s not seated correctly Silver tabs are the contact terminal points 16 If the lift stops moving over the water and is stuck 4 try pushing the emergency button A If the lift gets stuck out over the water use a pen or pencil tip and stick it into the emergency button on the front of the control box to retract the lift Note the lift will not retract if the battery is not fully charged or if the control box 1s not working The emergency button only overrides the remote in case it has gone bad If this does not retract the lift then chances are the remote 1s fine and you either have a problem with the battery the control box or the cords are damaged or not plugged in properly Use a pen or pencil tip to push in the small black circle located next to the word emergency on the front of the control box 17 kn 0099060069696 PATRIOT AT INTEGRATED LIFT PARTS LIST 6 1 WM M8980PPAFAT PROPOOLATACIUATORFRAME 8 1 BAO9MFRA FOOTRESTASSEMBY 9 1406150 HOSE CLAMP 1 3 4 SS HOSE CLAMP 1 3 4 SS 15 2 BOLTUAXI 2HEXSS 1 4 20 X 1 2 HEX BOLT SS 18 1 SAFTEYPIND BM 8 X4 SAFETY CLIP PIN 9 FLATWASHERSTeSS FLAT WASHER SS 8 X 1 3 4 SHOULDER SS 8 11 X 1 1 2 HEX BOLT SS 8 11 X6 CUSTOM HEX BLT SS 26 2
4. out Fill the tank with at least 600165 of all purpose or medium grain sand 4 Replace the caps to seal the tank USE A LARGE FUNNEL TO FILL TANK WITH ALL PURPOSE SAND REMOVE SCREWS amp CAPS FROM BOTH HOLES TO FILL TANK BALLAST TANK FILL BALLAST TANK WITH 12 5010 BAGS OF ALL PURPOSE SAND OR AT A FILL THE TANK WITH 600lbs OF ALL PURPOSE SAND OR EQUIVALENT REPLACE SCREWS amp CAPS WHEN TANK IS FILLED WARNING DO NOT OPERATE THE LIFT BEFORE FILLING THE BALLAST TANK FIXING ANCHOR INSTALLATION INSTRUCTIONS TOOLS REQUIRED CORE DRILLING RIG TAPE MEASURE 1 1 4 DIAMETER CORE DRILL MARKING PEN STEP 1 Use the diagram below to determine the location of the FIXING ANCHOR Make sure to allow for the clear deck space as shown STEP 2 Mark the location for the 1 1 4 x 4 deep anchor hole Drill a 2 diameter 4 deep hole at the marked location STEP 3 Dry fit the anchor insert to make sure it fits flush with the deck surface STEP 4 Fill the hole 12 full with epoxy Install the anchor insert flush with the deck surface Allow 24 hours for the epoxy to cure ANCHOR LOCATIO 32 L2 __ INSTALLING THE FIXING BOLT When FIXING BOLT 15 utilized to ensure proper placement of the portable lift the following procedure should be used when placing the unit in position on the deck STEP 1 Roll the portable cart over the installed anchor Look stra
5. the control box bracket and the battery can then be clipped into the wall mount charger When the charger is plugged in the green ON light will illuminate When the battery is correctly mounted to the charger the orange CHARGE light will illuminate When the battery is fully charged the CHARGE light will GO OFF and the battery is ready to use The battery charger will automatically shut off when the battery 1s fully charged so the battery can stay on the charger any time it 15 not being used 10 BATTERY MAINTENANCE l RECHARGE THE BATTERY AS OFTEN AS POSSIBLE The battery power unit 15 a sealed lead acid battery pack Frequent recharges will prolong the battery life and maintain a high cold amperage capacity 2 Do NOT expose the battery to freezing temperatures 3 Do NOT expose the battery to prolonged periods of extreme heat or severe cold temperatures 4 Do NOT expose the battery to long periods of direct sunlight Heat will shorten your battery life Optimum operating temperature is below 20 degrees Celsius 68 degrees F 5 Never drop or bump the battery pack This may result in loose or damaged internal connections and may bend the battery terminals 6 Keep battery terminals clean and free from dirt and corrosion to ensure good contact The terminals may be cleaned using Scotch Brite or any similar product Clean off any corrosion or discoloration on the very top surfaces of the battery contacts and then apply dielectric gre
6. the footrest When you are ready to return to the lift seat and exit the pool or spa make sure that the chair 15 lowered submerged sufficiently to allow you to easily slide into the chair You should not attempt to lift or raise yourself into the chair Once you are reseated into chair you may lower the footrest to it normal operating position and place your feet on the footrest Next re secure the adjustable lap belt snugly around your waist To raise the chair out of the pool simply press on the up arrow button on the remote control handset and apply continuous pressure until the lift chair comes to a rest on the deck in the full up position You may now release the lap belt and exit the chair 12 SAFETY amp MAINTENANCE INSTRUCTIONS Do not play on or around this lift 1 Check the PATRIOT AT LIFT before each use to assure there are no worn parts and that all hardware is properly tightened If there are any worn parts replace them BEFORE using the PATRIOT AT LIFT You can call our customer service at 1 888 687 3552 to order any parts Aqua Creek Products LLC lifts shall be grounded per local codes Atleast ONCE A WEEK the PATRIOT AT LIFT must be cleaned with fresh water Do not spray the PATRIOT AT lifts control box or battery directly with any pressure Wipe all surfaces clean with a damp non abrasive cloth When cleaning the LIFT use non abrasive soap and water Avoid harsh chemica
7. Check that the lift is working properly and then place the battery on the charger It is recommended that the battery be charged after every day of use If the lift is used WEEKLY follow the same steps as above Also be sure to check all of the contact points terminals for damage or corrosion If you notice corrosion gently clean the terminals To clean corrosion from the terminals use a q tip and some rubbing alcohol If the corrosion 15 particularly stubborn try using a scotch brite pad but be careful not to damage the terminals Apply dielectric grease to the terminals after cleaning them This will help to prevent further corrosion Do not leave the battery on the lift Always store the battery on the charger whenever the lift 15 not being used 13 If the lift is used MONTHLY follow the same steps as above Also check the nuts and bolts to make sure they are securely fastened this 1s always a good idea no matter how often or infrequently the lift is used Also make sure to store the battery on the charger and not on the lift Leaving the battery on the lift for extended periods will significantly shorten the battery s lifespan If the lift is being STORED for an extended period of time follow all of the steps above Check for rusting at all crevice and weld points If you notice rusting spray some WD 40 on the affected area and take a 3M scotch brite pad and rub briskly Afterwards be sure to wash and rinse the lift again with soap an
8. INSTALLATION AND OPERATING INSTRUCTIONS PORTABLE LIFT PART NUMBER F 12PPL HD ATI1 U S PATENT NUMBER 5 790 995 450 LB 204 kg MAXIMUM CAPACITY PRO POOL LIFT MANDATORY LEAVE THIS MANUAL WITH LIFT OWNER Inspected And Verified To Meet Applicable Sections of ADA Guidelines Section 1009 2 By Aqua Creek Products The Total Solution for Pool and Spa Access e 9889 GARRYMORE LANE laboratories MISSOULA MT 59808 1 888 687 3552 A Registered ISO 9001 FAX 406 549 2602 OAQUA CREEK PRODUCTS 2012 JUNE 2012 PORTABLE LIFT TABLE OF CONTENTS PAGE DESCRIPTION 3 ADA INSTALLATION GUIDELINES 4 PATRIOT AT PORTABLE PACKING LIST 5 PATRIOT AT PORTABLE ASSEMBLY INSTRUCTIONS 6 FIXING ANCHOR INSTALLATION INSTRUCTIONS 7 INSTALLING THE FIXING BOLT 8 9 TRANSPORTING amp USING THE PATRIOT AT PORTABLE 10 24V BATTERY OP amp INSTALL INSTRUCTIONS 11 BATTERY MAINTENANCE 12 PRO POOL AT LIFT OPERATING INSTRUCTIONS 13 CARE OF YOUR LIFT 14 17 TROUBLESHOOTING GUIDE 18 PATRIOT AT INTEGRATED POOL LIFT PARTS LIST 19 SEAT ASSEMBLY PARTS LIST 20 PATRIOT AT PORTABLE CART PARTS LIST 21 WARRANTY INSTALLATION ADA GUIDELINES ADA REQUIREMENTS The PATRIOT AT portable lift is designed and manufactured to be 100 ADA compliant But for the installed lift to be 10096 compliant the installation must meet the requirement for CLEAR DECK SPACE as shown in the diagram to t
9. REEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT IN NO EVENT SHALL AQUA CREEK PRODUCTS LLC BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL SPECIAL INDIRECT PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES SO SOME OF THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU Aqua Creek Products 9889 Garrymore Lane Missoula MT 59808 21
10. T FORWARD 3 ROTATE LIFT FORWARD ONTO AND DOWN TO ENGAGE PINS IN SLOT DECK LOWER BRAKE FOOT HANDLE FIXING ANCHOR BRAKE FOOT IS UP BRAKE FOOT IS DOWN TRANSPORT POSITION TILT AND ROLL FORWARD READY TO USE v 24V BATTERY SYSTEM OPERATING AND INSTALLATION INSTRUCTIONS gt y 4 o 7 5 f v 7 WALL MOUNT CHARGER CONTROL BOX 24V SEALED BATTERY amp HANDSET REMOTE The Pro Pool AT Lift comes with a 24v sealed rechargeable battery wall mount charging unit with mounting bracket control box and a waterproof handheld controller The control box is mounted to the Pro Pool AT Lift and has a plug in socket for both the actuator and the handheld controller The battery mounts directly above the control box with a quick release clip To operate the Pro Pool AT Lift plug in the handheld controller to the control box and push the corresponding button to either lower or raise the unit The lift should be able to complete approximately 10 20 full cycles before the low battery indicator tone will sound The low battery tone indicates that there is approximately 20 battery life remaining At this point DO NOT ATTEMPT TO OPERATE THE LIFT remove the battery from the unit and recharge on the wall mounted charging unit To recharge the battery simply grip the top of the battery and depress the clip on the back of the battery This will unclip the battery from
11. actory location or duly appointed distributor for inspection and or repair Aqua Creek will at its option repair or replace the failed or defective item and deliver the repaired product or replacement to the buyer of the product freight prepaid to the destination provided for in the original order Products returned to Aqua Creek for which Aqua Creek provides replacement under this limited warranty shall become the property of Aqua Creek A new warranty period shall NOT be established for the repaired or replaced products Such products shall remain under warranty only for the remainder of the original warranty period on the original products purchased This written limited warranty constitutes the final complete and exclusive statement of warranty terms No person or organization is authorized to make any other specific or implied warranties or representations on behalf of Aqua Creek THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED WHICH ARE HEREBY DISCLAIMED AND EXCLUDED INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE THE SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO THE PRODUCTS SHALL BE LIMITED TO REPAIR OR REPLACEMENT AT AQUA CREEK S DESIGNATED FACTORY LOCATION OR DULY APPOINTED DISTRIBUTOR OR IN PLACE AT AQUA CREEK S OPTION IN NO EVENT SHALL AQUA CREEK S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA C
12. ase supplied with lift as shown in the figure below CLEAN WITH SCOTCH BRITE AND APPLY DIELECTRIC GREASE TO TERMINALS MAKE SURE PLUGS ARE FULLY SEATED AS SHOWN BELOW TAB TO FRONT HANDSET CABLE On the front side of the control box is a small recessed button marked emergency Take a pen or pencil or other pointed object and depress the emergency button This will bypass the remote control and send a signal directly to the actuator to raise the seat out of the pool and back to the deck or up position NOTE This function will only work if there is sufficient power in the battery the battery is properly attached to the control box and the control box must be operating properly 11 PRO POOL LIFT OPERATING INSTRUCTIONS NOTE CHECK ALL NUTS amp BOLTS FOR TIGHTNESS AND FOR WORN PARTS BEFORE EACH USE The Pro Pool Lift should always be in the full up or deck position before a user attempts to transfer into the chair Before attempting to transfer into the chair check to make sure the lift 15 operating by making a short test run move the chair at least part way in and out of the pool As you are standing in front of the chair facing the chair the armrest on either side will flip up to allow for easier lateral transfers Transfer into the chair and then lower the flip up armrest back into its normal position Secure the adjustable lap belt around the waist so that the belt is snug but not uncomf
13. d water When storing the lift make sure it 1s in a dry area and covered DO NOT STORE in or around pool chemicals 14 TROUBLESHOOTING GUIDE Before troubleshooting make sure the battery 1s fully charged If the lift doesn t move when the handset button is pressed When you can t get the lift to move check the following things 1 Make sure the battery is fully charged A Before charging the battery first make sure the green light on the front of the charger 1s illuminated this means that the charger 15 on Then check to make sure the silver contact points on the battery and charger are not damaged or corroded and that they are clean Then place the battery on the charger and look for the orange charge light to illuminate on the front of the charger When the orange light goes off the battery 1s fully charged The top green light will always be illuminated indicating that it has power When charging the battery the bottom orange light will illuminate until fully charged When the battery 15 correctly installed on the charger or control box you should hear click indicating the battery 15 properly seated the unit Also note that when the battery 1s properly seated there should not be any gaps between the battery and the control box charger Not attached properly Note Properlv Attached the white bracket 1s 1n front of Note that the white bracket 15 silver clip which will not allow behind the silver clip No
14. down as shown below Tilt the lift to almost horizontal to make rolling and pivoting as simple as possible 2 Rollthe lift forward until it comes to the end and the pins engage with the slots 3 Rotate the lift forward and down until it rests flat on the deck Turn the handle of the brake foot clockwise until the brake foot 1s firmly in contact with the deck The lift 1s now ready to use GUIDE FRAME BACK END REMOVE FIXING BOLT TO TRANSPORT WHERE APPLICABLE STAND HERE CLOSE UP DETAIL GUIDE FRAME caer WALL 1 ROTATE LIFT BACK UNTIL 2 ROLL LIFT BACK TO 3 TILT LIFT FORWARD ONTO WHEELS ARE CART LEVEL END OF GUIDE FRAMES CART FOR TRANSPORT HANDLE FIXING ANCHOR IN DECK BRAKE FOOT IS DOWN BEFORE TILT AND ROLL TILT AND ROLL ONTO CART TRANSPORT POSITION BRAKE FOOT IS UP RETURNING THE LIFT TO TRANSPORT MODE To move the lift after use reverse the steps above as follows 1 Tilt the lift back and down until the lower wheels are at the cart level 2 Roll the lift back and onto the cart Roll all the way back to the end of the guide frames see close up detail 3 Pivot the lift forward and down until it 1s resting on the cart Rotate the brake foot handle counter clockwise and raise it off the deck REMOVE THE FIXING BOLT if applicable The lift is now ready to move FIXING BOLT INSTALLED STAND HERE CLOSE UP DETAIL PIN IN SLOT eu WALL 1 TILT LIFT BACK 2 ROLL LIF
15. he left To be compliant install the lift at 16 inches 406mm minimum from the pool edge to the centerline of the seat and make sure the deck has the required CLEAR DECK SPACE as shown NOTE As per ADA requirements the slope of the deck from the pool edge to the centerline of the seat and within the clear deck space must be no greater than 1 48 ADA REQUIRED CLEAR DECK SPACE c 38 1 2 FIXIN G BAR FIXING BOLT CHAIR 25 TO 31 16 TO 22 8 TO 14 SETBACK RANGE POOL WALL NOTE The FIXING BOLT is used to fix the portable lift in place and to ensure that it remains in an ADA approved location This makes the lift fully ADA compliant to the latest revision THE PATRIOT AT PORTABLE LIFT PARTS LIST SEE FIGURE 2 PORTABLE CART W WHEELS INTEGRATED LIFT ROLL BASE BALLAST TANK W HANDLE 24V BATTERY HANDSET CONTROL BATTERY CHARGER E 7 d FIGURE 2 PATRIOT AT PORTABLE ASSEMBLY INSTRUCTIONS 1 The BALLAST TANK needs to be filled with sand to make the lift stable during usage This will require twelve 12 5015 bags of all purpose sand or equivalently 600155 272kg medium grain sand to fill to the required weight 2 Remove the caps from each of the two filling holes on the BALLAST TANK 3 Using a large funnel pour the sand into the tank Alternate sides to keep the sand even and shake or tap the tank periodically to level it
16. ight down through the DOCKING BAR to align the anchor with the DOCKING BAR STEP 2 Drop the 1 2 x 4 1 2 DOCKING BOLT into the DOCKING BAR and start to thread the bolt into the anchor by hand Adjust the alignment until the bolt threads in a couple of threads by hand This 15 to ensure that the bolt 15 properly aligned before threading with a wrench STEP 3 Tighten the DOCKING BOLT with 34 wrench or socket Tighten until the bolt is just touching the flat washer DO NOT OVERTIGHTEN DOCKING BOLT 09172 13 X 4 1 2 PVC ANCHOR icm ce TRANSPORTING amp USING THE PATRIOT AT LIFT The Patriot AT Lift has been designed to make transporting and using the lift as simple as possible The design makes the lift 100 ADA compliant by providing two separate operating modes one for transporting the lift and one for using it MODES OF OPERATION 1 TRANSPORT MODE In this mode the lift 1s on top of the portable cart and the brake foot is raised allowing the lift to roll and turn freely The safety flag also inhibits use of the lift while in this position 2 OPERATION MODE In this mode lift is on the deck surface and brake foot is lowered keeping the cart and lift stable and stationary To place the lift 1n this position follow the instructions below TRANSPORT INSTRUCTIONS 1 Roll Patriot AT Lift to designated position on the deck Install fixing bolt when required Stand behind the lift and tilt it back and
17. ls and disinfectants Always read the label instructions on any cleaner carefully before applying it to a surface The WARNING amp INTENDED USE labels on the PATRIOT AT need to be maintained in readable fashion If they become unreadable or faded please replace the label immediately Replacement labels are available from AQUA CREEK PRODUCTS LLC 1 888 687 3552 Aqua Creek Pool Lift should not be stored in a pump room or in a storage room where pool chemicals are kept Storing the lift near pool chemicals may cause rusting and other damage to occur Your Aqua Creek stainless steel lift 1s powder coated to protect the stainless steel from rusting Most rusting will occur at weld points crevices under gaskets rivets or bolt heads The choice of a proper cleaning product is up to the consumer and there are many to choose from Depending on the type of cleaning and the degree of contamination rusting some products are better than others For routine cleaning the products most recommended are gentle soaps or detergents or dilute mixtures of ammonia For stubborn spots and stains try using soft scrub with some brisk rubbing DO NOT USE POOL WATER TO CLEAN USE ONLY FRESH WATER If the lift is used DAILY make sure to wash the lift at the end of the day Wash the lift off using a mild soap and a soft cloth Make sure to pay special attention to weld points and crevices Do not use a bristled brush or steel wool to clean the lift
18. ortably tight You are now seated comfortably in the Pro Pool Lift and ready to move into the pool or spa Before you begin the operating cycle take a visual check of the deck area and pool area to make sure the operating path of the lift 1s clear It is not necessary to lower the lift all the way to the bottom of the lift s stroke You may stop the lift at any time in the downward cycle when it 15 comfortable for you to exit the chair into the water This 1s NOT true however when returning to the deck during the up cycle The lift should always be cycled completely to the up or deck position before attempting to exit the chair on the deck To lower the lift into the pool simply apply pressure on the down arrow button on the remote control handset and the chair will start to move towards the pool NOTE for safety reasons it 15 necessary to maintain continuous pressure on the control button If you take your finger off of the control button the lift will stop When you are sufficiently submerged into the water to allow for an easy exit from the chair you may stop the lift cycle by releasing pressure on the down arrow button on the remote control handset Now release the lap belt by grasping the end of the belt that is protruding above the lap belt and tugging gently You may now flip up the footrest to create more room in front of the chair for you to exit Exit the chair by sliding straight forward until you are clear of the seat and
19. t allowing for an electrical connection movement 15 If the battery is fully charged and the lift is not moving then 2 Check all cords A Check that the cords are properly plugged in Start by unplugging the remote and the actuator cord from the control box Once these cords are removed check the ends for corrosion or damage Plug the remote cord back in by lining up the raised tab on the plug to the grooved line on the control box outlet Note that these cords require some force to plug them in fully You will know they a correctly inserted when you here a popping sound The cords will be recessed into the outlet If they are flush with the outside of the outlet they are not plugged in fully and the lift will not function Make sure you do this for both cords NOT inserted fully Fully inserted 4 If you have checked all the cords the lift still doesn t move 3 Check the contact points A After you have fully charged the battery and checked the cords to make sure they are properly plugged in check to make sure the contact points are not corroded or bent If the contact points are corroded take some rubbing alcohol and a q tip and clean off the points After cleaning the contact points it is recommended to put some dielectric grease on the contact points terminals to help ensure good electrical contact and prevent corrosion Then reinstall the battery on top of the control box Make sure you hear a click which
Download Pdf Manuals
Related Search