Tri Flat PAR Profile 18x3W RGB LED PAR user manual
Contents
1. Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 45 Operating Constant colour A constant colour can only be activated when the unit is operating alone or as master in a master slave combination This setting is only relevant if the device is not controlled via DMX Press MANUAL Now you can either call up a predefined colour directly with one of the col oured buttons or mix a colour individually from the basic colours Press R G or B to mix a colour individually from the basic colours The display shows r xxx G xxx or D xxx Use and to set the colour intensity Display Description r 000 r 255 Red G 000 G 255 Green b 000 b 255 Blue Blackout Press BLACKOUT to switch the LEDs off or on again Then the unit continues to operate in the last selected operating mode The Blackout function is only available when the unit is not controlled via DMX th mann LED PAR MUSIC IS OUR PASSION 46 Technical data 8 Technical data Number of DMX channels 3 5 or 7 channels depending on operating mode Lamp 18 x 3 W LEDs RGB Beam angle approx 25 Mains power supply 100 240 V AC 50 60 Hz Power consumption 60 W Fuse 5 mm x 20 mm 2 A 250 V slow blow Dimensions W x H x D 210 mm x 270 mm x 135 mm without bracket Weight 2 9 kg Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 47 Plug and conn2. 8 DMX Out DMX output 9 Power Out IEC chassis socket for the power supply cable to the next unit 10 Power In IEC chassis plug for operating voltage supply with fuse holder Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 25 Connections and controls Controls th mann LED PAR MUSIC IS OUR PASSION 26 Connections and controls 11 Display 12 Button Down Navigates downwards in a menu list Decrements the displayed value by one 13 Button Up Navigates upwards in a menu list Increments the displayed value by one 14 Button Setup Chooses between the options of the selected mode 15 Button Mode Activates the main menu and moves between menu items Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 27 Connections and controls Remote control th mann LED PAR MUSIC IS OUR PASSION 28 21 22 23 24 25 26 27 Connections and controls BLACK OUT Enables or disables blackout AUTO Enables or disables auto mode SOUND Starts the sound controlled automatic show SPEED Allows setting the speed for the flash light function using the and buttons SENSITIVITY Allows setting the sensitivity for the sound control using the and buttons FADE SNAP No function Resets the displayed value to zero during value setting flash light speed sound control sensitivity Tri Flat PAR Profile 18x3W RGB the
3. Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 13 Features 3 Features The LED PAR is particularly suitable for lighting applications in clubs and discotheques on rock stages in theatres and musicals Special features of the device E 18 tri colour LEDs 3 W each E Control via DMX 3 different modes with the included infrared remote control and via buttons and display on the unit Nine preprogrammed automatic shows Sound control Master slave mode Rugged metal housing in compact design th mann LED PAR MUSIC IS OUR PASSION 14 Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportati
4. The set values are retained even when the device is disconnected from the mains power supply To delete all settings made by you follow the notes in chapter Reset to factory defaults on page 37 th mann LED PAR MUSIC IS OUR PASSION 32 Operating Operating mode Preprog A preprogrammed automatic show can only be activated when the unit is working alone or as rammed automatic show Master in a Master Slave combination This setting is only relevant when the unit is not DMX controlled Press Mode repeatedly until the display shows Pr xx Now you can select one of the preprog rammed automatic shows Use Up and Down to select a value between Pr 01 and Pr 09 Settings for programme 01 For Pr 01 you can choose from 10 predefined colours or blackout Press Setup Use Up and Down to select one of the colours display shows 7 __r to 09 on or blackout display shows 0 OFF To adjust the strobe frequency press Setup again The display shows FS xx Now use Up and Down to select a value between FS 00 slow and FS 99 fast Settings for programme 02 to 09 To set the programme speed press Setup again The display shows SP xx Now use Up and Down to select a value between SP 01 slow and SP FL fast To adjust the strobe frequency press Setup again The display shows FS xx Now use Up and Down to sele
5. trol th mann LED PAR MUSIC IS OUR PASSION Remedy Check the mains connection and the main fuse 1 If the unit is in DMX mode and a DMX controller is connected and turned on the d flashes in the first posi tion of the display If not no valid DMX signal is received Check that the DMX controller is switched on Check the DMX connectors and cables for proper connection 2 If the display is not flashing and there is still no response check the address settings and DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or inter ference to DMX interface circuits 1 Try the remote control at a different angle to the receiver on the front of the device 2 Move the remote control closer to the unit 3 Check the remote control battery 50 Troubleshooting If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 51 Cleaning 11 Cleaning Optical lenses Fan grids themann MUSIC IS OUR PASSION Clean the optical lenses that are accessible from the outside regularly in order to optimize the light output The frequency of cleaning depends on the operating environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt
6. 6 Functions in 5 channel DMX MOde ssesscssssscsssscesssesesssecessnecessseeessnecessneeessnecesuneessneeessnecessnecs 40 7 7 Functions in 7 channel DMX mode snenseonsssennsnsennnssennnnsennnnsennnnsennnnssnnnnssnnnnssnnnnsennenee 41 7 8 Remote COMI necnon iiai 44 Technical d ta nn anne nt saves mer rennen 47 Plug and connection assignMentt ccccsssssescsssscssessseessseceseecsnecesecssscesseessscesaeessceesneeeseeesies 48 Troubleshooting E 49 Cleaning enteignet A E E 52 Protecting the environment unnnneenseeennsseennseennnsennnnsennnnstennnssennsennnnneennnsnennntnennne 53 LED PAR 1 General notes General notes This manual contains important instructions for the safe operation of the unit Read and follow the safety instructions and all other instructions Keep the manual for future reference Make sure that it is available to all those using the device If you sell the unit please make sure that the buyer also receives this manual Our products are subject to a process of continuous development Thus they are subject to change Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION General notes 1 1 Further information On our website www thomann de you will find lots of further information and details on the following points Download This manual is also available as PDF file for you to download Use the search function in the electronic version to f
7. 8 55 56 83 84 111 112 139 Function Dimmer 0 to 100 Intensity red 0 to 100 when channel 5 0 Intensity green 0 to 100 when channel 5 0 Intensity blue 0 to 100 when channel 5 0 Manual mode colours can be adjusted via channels 2 to 4 Preprogrammed automatic show no 1 Preprogrammed automatic show no 2 Preprogrammed automatic show no 3 Preprogrammed automatic show no 4 Preprogrammed automatic show no 5 Tri Flat PAR Profile 18x3W RGB Operating th mann MUSIC IS OUR PASSION 41 Operating Channel Value Function 140 167 Preprogrammed automatic show no 6 168 195 Preprogrammed automatic show no 7 196 223 Preprogrammed automatic show no 8 224 251 Preprogrammed automatic show no 9 2520255 Sound controlled show 6 Constant colour when channel 5 1 24 0 27 Dark 28 55 Red 56 83 Orange 84 111 Yellow 112 139 Light green 140 167 Light blue 168 195 Blue th mann MUSIC IS OUR PASSION 42 LED PAR Operating Channel Value Function 196 223 Purple 224 251 Pink 252 255 Red green blue Progress speed when channel 5 25 255 0 255 Increasing speed 7 0 255 Strobe effect increasing speed Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 43 Operating 7 8 Remote control Operating mode Preprog rammed automatic show Operating mode Automatic themann MUSIC IS OUR PASSION A preprog
8. NING This combination of symbol and signal word indicates a pos sible dangerous situation that can result in death or serious injury if it is not avoided NOTICE This combination of symbol and signal word indicates a pos sible dangerous situation that can result in material and environmental damage if it is not avoided th mann LED PAR MUSIC IS OUR PASSION General notes Warning signs Type of danger Warning high voltage Warning suspended load Warning danger zone gt ee Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 9 Safety instructions 2 Safety instructions Intended use This device is intended to be used as an electronic illumination effect using LED technics Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only ifthey are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Safety Ensure that chi
9. OUR PASSION This setting is only relevant when the unit is working as Slave in a Master Slave combination and is not DMX controlled Press Mode repeatedly until the display shows SLAv The sound controlled automatic show can only be activated when the unit is working alone or as Master in a Master Slave combination This setting is only relevant when the unit is not DMX controlled Press Mode repeatedly until the display shows SOud This activates the sound controlled automatic show Press Setup and use Up and Down to adjust the sensitivity for the sound control in a range from SV 00 to SV 31 LED PAR 36 Operating Constant colour A constant colour can only be activated when the unit is working alone or as Master in a Master Slave combination This setting is only relevant when the unit is not DMX controlled Press Mode repeatedly until the display shows Colr Press Setup The display shows the set ting for one of the basic colours display shows r xxx G xxx or b xxx Press Setup to toggle between colours Use Up and Down to adjust the colour intensity Display Description r 000 r 255 Red G 000 G 255 Green b 000 b 255 Blue Reset to factory defaults To reset all settings you have made to factory defaults press Mode and Setup simultane ae five seconds After the reset the unit operates in automatic mode Th
10. S TeV Tri Flat PAR Profile 18x3W RGB LED PAR th mann user manual MUSIC IS OUR PASSION Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 09 12 2014 ID 317335 V2 Table of contents na vu A A WUN Table of contents Generalin tes u 00 isdn nennen snenne on landeederen nen aradnner odeachsousoseteadbicctasestion 5 1 1 Further information 1 2 Notational conventions 7 1 3 Symbols and signal WOrdsS ssscsssscsssecseecsssccsnesesssccssecsssscsssecsescesseesasecssscecseeesscecsuecssnecesneeesseeses 8 Safety imstructi ois s isiicccs ccssc ceseccceskscseasscdieeacicastchisstsicestisciedecssanbadeean aesscadeckisaiatiscastussiataedaasbaeaaeacendied 10 Features CEASE uaan Si 14 Installation PTA R EAE NS 15 Starting UP EN 19 Connections and COMtIOIS 0 escssescsssecssesecssscesseecsnseecsnscecsssecessecsnseessnseessssccesseecsnseecsnseeesnseeese 22 Operating oiana a ea Aa TEES PEAS aS Sr EENET ESE 31 7 1 Starting the e E E E E 7 2 Main Menu anne an RRR RRRA RR 7 3 Menu overview 7 4 Temperature monitoring 7 5 Functions in 3 channel DMX MOe cecsssesssscssssecssecssceessccessecssscessecsnscessescssceesscceseecsnecesseessecs 39 Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION Table of contents themann MUSIC IS OUR PASSION 10 11 12 7
11. ct a value between FS 00 slow and FS 99 fast Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 33 Operating Operating mode Automatic This operating mode can only be activated when the unit is working alone or as Master in a Master Slave combination This setting is only relevant when the unit is not DMX controlled Press Mode repeatedly until the display shows AUTO The playback of the built in automatic programme starts automatically th mann LED PAR MUSIC IS OUR PASSION 34 Operating DMX Modus This setting is only relevant when the unit is DMX controlled Press Mode repeatedly until the display shows d xxx Now you can set the number of the first DMX channel to be used by the device DMX address Use Up and Down to select a value between 1 and 512 display shows d 0017 d 512 Make sure that this number matches the configuration of your DMX controller The following table shows the highest possible DMX address for the various DMX modes Mode Highest possible DMX address 3 channel 510 5 channel 508 7 channel 506 Press Setup Now use Up and Down to select one of the following DMX operating modes m 3 ch three channels m 5 ch five channels m 7 ch seven channels Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 35 Operating Operating mode Slave Sound control themann MUSIC IS
12. e daisy chain is terminated with a resistor 1100 1 4 W 2 cco n th mann LED PAR MUSIC IS OUR PASSION 20 DMX indicator Connections in master slave mode Starting up If the unit is in DMX mode and a DMX controller is connected and turned on the d flashes in the first position of the display When you configure a group of devices in master slave mode the first unit will control the other units for an automatic sound activated synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 21 Connections and controls 6 Connections and controls Overview th mann LED PAR MUSIC IS OUR PASSION 22 a un BR w N Infrared receiver for the IR remote control signal Bottom side with inputs DMX and power supply Locking screws for the mounting brackets Rubber feet for floor placement Top side and controls Mounting brackets for floor placement or hanging Tri Flat PAR Profile 18x3W RGB Connections and controls themann MUSIC IS OUR PASSION 23 Connections and controls Connection panel th mann LED PAR MUSIC IS OUR PASSION 24 Connections and controls 7 DMX In DMX input
13. e display shows Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 37 Operating 7 3 Menu overview eee eee cr Se Be ee 1 i ee _ _ Pr02 SPO FS00 SP99 SPFL th mann LED PAR MUSIC IS OUR PASSION 38 Operating 7 4 Temperature monitoring If the temperature inside the unit gets too high the device automatically switches off Let the unit cool down in this case before powering it up again The temperature controlled shutoff function is constantly monitored by the device If a defect is detected the value rt flashes in the display In this case please contact our service centre Contact details can be found at www thomann de 7 5 Functions in 3 channel DMX mode Channel Value Function 1 0 255 Intensity red 0 to 100 2 0 255 Intensity green 0 to 100 3 0 255 Intensity blue 0 to 100 Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 39 Operating 7 6 Functions in 5 channel DMX mode Channel 1 U A U N th mann MUSIC IS OUR PASSION 40 Value 0 a EZ EZ ES T255 7259 T255 72595 T255 Function Intensity red 0 to 100 Intensity green 0 to 100 Intensity blue 0 to 100 Dimmer 0 to 100 Strobe effect increasing speed LED PAR 7 7 Functions in 7 channel DMX mode Channel 1 u A U N Value 0 255 0 255 0 255 0 255 Operating mode 0 127 2
14. ection assignments 9 Plug and connection assignments Introduction DMX connections themann MUSIC IS OUR PASSION This chapter will help you select the right cables and plugs to connect your valuable equip ment so that a perfect light experience is guaranteed Please take our tips because especially in Sound amp Light caution is indicated Even if a plug fits into a socket the result of an incorrect connection may be a destroyed DMX controller a short circuit or just a not working light show The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug Pin Configuration 1 Ground shielding 2 Signal inverted DMX cold signal 3 Signal DMX hot signal LED PAR 48 Troubleshooting 10 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 49 Troubleshooting Symptom The unit does not work no light No response to the DMX con troller No response to the remote con
15. ind the topics of Keyword search interest for you quickly Our online guides provide detailed information on technical basics Online guides and terms Personal consultation For personal consultation please contact our technical hotline If you have any problems with the device the Service A i customer service will gladly assist you th mann LED PAR MUSIC IS OUR PASSION General notes 1 2 Notational conventions This manual uses the following notational conventions Letterings The letterings for connectors and controls are marked by square brackets and italics Examples VOLUME control Mono button Displays Texts and values displayed on the device are marked by quotation marks and italics Examples 24ch OFF Cross references References to other locations in this manual are identified by an arrow and the specified page number In the electronic version of the manual you can click the cross reference to jump to the specified location Example See Cross references on page 7 Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION General notes 1 3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual Signal word Meaning DANGER This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided WAR
16. l household waste Dispose this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility th mann LED PAR MUSIC IS OUR PASSION 54 Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany www thomann de
17. ldren do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices th mann LED PAR MUSIC IS OUR PASSION 10 Safety instructions DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside Do not use the device if covers protectors or optical components are missing or damaged DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 11 Safety instructions WARNING Eye damage caused by high light intensity Never look directly into the light source WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames th mann LED PAR MUSIC IS OUR PASSION 12 Safety instructions NOTICE
18. mann MUSIC IS OUR PASSION 29 Connections and controls 28 STROBE Enables or disables the flash light function strobe effect with the last selected colour 29 MANUAL Activates the display of a constant colour that you can either mix from the basic colours using the buttons R G and B or select directly with one of the colour buttons 30 R G B Sets the intensity of the three basic colours red green and blue when displaying a constant colour 31 Hr Increases or decreases the set value 32 Direct selection button for mixed colours th mann LED PAR MUSIC IS OUR PASSION 30 Operating 7 Operating 7 1 Starting the device Connect the device to the power supply to start operation After a few seconds the display indicates that a reset is in progress The device is then ready for use The display shows the operating mode that was selected when the unit was last powered off 7 2 Main menu Press Mode to activate the main menu and select an operating mode Use Setup to select further options Use Up und Down to change the respectively displayed value The unit instantly applies the displayed value you don t need to push a button for confirmation If you don t press any button for about ten seconds the display turns off It will be reactivated to display the previously shown menu by pressing any button Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 31 Operating
19. on or storage use the original packaging or your own packaging material suitable for transport or storage respectively WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a Safety cable or a safety chain Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 15 Installation themann MUSIC IS OUR PASSION NOTICE Risk of overheating Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F NOTICE Use of stands When mounting the device onto a stand ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand LED PAR 16 Installation NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers Mounting options You can install the device standing or hanging upside down When in use the device must be mounted at a solid surface or clamped to an approved truss Use the openings of the two piece bracket provided for mounting Work from a stable platform whenever you install or move the device or when you perform any kind of main
20. on the optics of the device m Clean with a soft cloth using our lamp and lens cleaner item no 280122 Always dry the parts carefully The fan grids of the device must be cleaned on a regular basis to remove dust and dirt Before cleaning switch off the device and disconnect AC powered devices from the mains Use a lint free damp cloth for cleaning Never use solvents or alcohol for cleaning LED PAR 52 Protecting the environment 12 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose these materials with your normal household waste but make sure that they are fed to a recovery Please follow the notes and markings on the packaging Disposal of batteries Batteries must not be disposed of as domestic waste or thrown into fire Dispose of the bat teries according to national or local regulations regarding hazardous waste To protect the environment dispose of empty batteries at your retail store or at appropriate collection sites Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 53 Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive WEEE Do not dispose with your norma
21. rammed automatic show can only be activated when the unit is operating alone or as master in a master slave combination This setting is only relevant if the device is not con trolled via DMX Press MANUAL The display shows Pr xx Now you can select one of the preprogrammed automatic shows Use and to select a value between Pr 07 and Pr 09 Press SPEED to adjust the programme speed The display shows SP xx Use and to select a value between SP 01 slow and SP FL fast Press STROBE to set the flash frequency The display shows FS xx Use and to select a value between FS 00 slow and FS 99 fast The automatic mode can only be activated when the unit is operating alone or as master in a master slave combination This setting is only relevant if the device is not controlled via DMX Press AUTO The display shows AUTO the playback of the built in automatic programme starts automatically LED PAR Operating Sound control The sound controlled automatic show can only be activated when the unit is operating alone or as master in a master slave combination This setting is only relevant if the device is not con trolled via DMX Press SOUND The display shows SUxx the sound controlled automatic show is activated Use and to set the sensitivity for the sound control in a range between SV 00 and SV 31
22. tenance Block access under the work area The safety cable must be attached to the bracket Infrared sensor for the IR The infrared receiver is located near the main LED on the front panel of the device Make sure remote control signal that it is not obstructed Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 17 Installation Inserting the battery into the remote control themann MUSIC IS OUR PASSION Press the lock of the battery holder to the centre of the housing and pull out the battery holder like a drawer Insert the battery The battery is correct if the positive pole points to the housing base of the remote control Slide the battery holder back into the remote until it clicks into place When shipping the battery is already installed in the remote and protected against discharge by a transparent plastic foil Remove the plastic foil prior to first use LED PAR 18 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections Tri Flat PAR Profile 18x3W RGB th mann MUSIC IS OUR PASSION 19 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in th
Download Pdf Manuals
Related Search