User Manual - Audio Authority
Contents
1. one is removed If a louder alarm is desired the external siren port can power a 12VDC siren when a theft is detected When headphones must be connected and disconnected insert and turn on the siren reset key make product changes and turn the key off again Only one key is needed per system reset status is communicated to all other modules that are connected via System Bus Timeout Switch In switching mode a demo timer is initiated each time a customer selects a product output to audition The demonstration length is set by the timeout switch in increments of 15 seconds If the timeout switch is set to 0 then the demonstration does not time out Feature Switch Settings Off up position On down position Gain 0dB Gain 6dB 1 active product per board 1 active product per system Theft detection off Theft detection on Switcher mode Amplifier mode Operation On initial power up the system initializes and detects connected headphones This takes approximately 20 seconds power light is lit When the power light is flashing the system is ready for use AudioGDaAuthority 2048 Mercer Road Lexington KY 40511 1071 USA 800 322 8346 859 233 4599 Fax 859 233 4510 support audioauthority com www audioauthority com 752 649 12 122. User Manual Model 1710 Headphone Demonstration Switching Amplifier Shown with optional cover AudioGbauthority Introduction The 1710 is designed to provide high fidelity amplification for premium headphones and manual switching for self service retail demonstration The 1710 has several options that govern the behavior of the headphone demonstration Generally only one of the four outputs may be active at any time Larger systems linked by system bus and audio patch cords can either allow one live position on each 1710 or the entire system can be limited to one active position at a time see feature switch settings This configuration may be desired for very compact displays but multiple selling stations are often preferred POWER FEATURE SYSTEM CUSTOMER AUDIO INPUT SWITCHES BUS INPUT BUS OUT POWER DEMO SIREN HOUSE OUTPUT TIMEOUT OUT PLAYER PRODUCT SELECT BUTTONS RESET KEY SWITCH POWER we LIGHT THEFT HEADPHONE HEADPHONE HEADPHONE HEADPHONE BUZZER POSITION 1 POSITION 2 POSITION 3 POSITION 4 Visit www audioauthority com demobeat for tips and application diagrams Liability Statement Every effort has been made to ensure that this product is free of defects Audio Authority cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use It is the responsibility of the user of the hardware to check that it is suitable for his her requirements an
3. d that it is installed correctly All rights reserved No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical including photocopying recording or by any information storage or retrieval system without the written consent of the publisher Audio Authority reserves the right to revise any of its hardware and software following its policy to modify and or improve its products where necessary or desirable This statement does not affect the legal rights of the user in any way All third party trademarks and copyrights are recognized The Audio Authority logo and Double A logo are the registered Trademarks of Audio Authority All other trademarks are the property of their respective holders 2 Before attempting to use this unit please check the packaging and make certain the following items are contained in the shipping carton e 1710 Headphone Switching Amplifier e DC Power Adapter e User Manual Note Please retain the original packing material in case the unit must be returned If you find any items are missing contact Audio Authority immediately Have the Model Number and Invoice available for reference when you call Features e High quality headphone amplification e Switching or distribution behavior e Adjustable demonstration timeout e Automatic selection of customer audio source when connected Theft detection and integral alarm e Multiple units can easily be connected together fo
4. r any size system Audio Sources and Customer Auto Demo Connect a music player to the PLAYER input jack as the default audio source If desired provide a 3 5mm cord connected to the CUSTOMER input so that customers may use their own music players to demonstrate headphones When audio is detected on the CUSTOMER input jack the customer audio is selected as the audio source If no audio is detected on the CUSTOMER input for 7 5 seconds the 1710 switches back to the PLAYER input Bus Out The bus output feeds the currently selected audio input player or customer to more 1710 modules or other audio devices in the system Connect a 3 5mm patch cord from the first 1710 bus output to the second 1710 player input etc One linked system sharing a house player also must share one customer input do not use any customer inputs besides the first 1710 System Bus A four conductor System Bus cable that allows multiple 1710 modules to be connected and communicate with each other They can communicate current product selection as well as alarm signals and alarm reset see Theft Detection below Button PSB Ports In switching mode customers can activate one product at a time using a two wire momentary switch Connect a switch for each corresponding product The LED in the switch if present illuminates during the demonstration Theft Detection The 1710 can detect the headphones that are connected at boot The on board buzzer will sound if
Download Pdf Manuals
Related Search