User Manual - Frank`s Hospital Workshop
Contents
1. N Human User Manual HUMATEMP Microplate Incubator Cat No 1700 1 CONTENTS Safety Information Introduction Contents of Shipment Unpacking Technical Features A A A WwW This side left blank 2 4 User Manual HUMATEMP Human Installation The instrument is equipped with a water bath to keep the internal humidity constant during incubation phase Fill in about 10 ml of water Connect the instrument to the power supply with the Adapter DC via the power connector on the back of the instrument Place it on a flat dust free surface For correct use of the instrument close the cover The RED led indicates power on and warm up After 20 30 minutes the instrument will reach the working temperature and the GREEN led comes on indicating that the instrument is ready to work WARNING Put the microplate onto the incubator only when the GREEN led is on The time to reach the working temperature strongly depends on the environment temperature It may take even more than 30 minutes Safety Information Use the instrument only for purposes indicated in this Manual Install the instrument as described in this Manual Never pull the instrument by the power cable Change the power cable whenever damaged In case of malfunctioning it may only be repaired by qualified personal Introduction HUMATEMP is a micro plate incubator developed to reach a fixed temperature of 37 C and to keep it ho2. 205 Wiesbaden Germany Telefon 49 6122 9988 0 Telefax 49 6122 9988 100 eMail human human de Internet http www human de 03 2003 09
3. mogeneous all over the incubator HUMATEMP can heat one 96 well micro plate 12x8 The cover is necessary to avoid direct light access and to maintain constant humidity User Manual HUMATEMP 3 4 Contents of Shipment The instrument is shipped in one box containing 1 HUMATEMP 1 Adapter DC power supply adjustable 1 User s Manual 1 Cover 1 Control sheet Unpacking Remove the instrument from its box and place it on a flat dust free surface Make sure that the Serial Number on the instrument see label on the bottom corresponds with the serial number in the delivery papers If there is any difference please report to your supplier immediately Only the correct instrument Serial Number allows the manufacturer to rectify your claims in case of warranty Technical Features Temperature 37 0 C fixed Temperature Accuracy 0 2 C with closed cover Temperature Stability 0 2 C with closed cover Temperature Uniformity 0 1 C with closed cover Warm up Time 20 30 minutes Dimensions 174x112x60mm Weight Instrument 920g Adapter 360g Power Supply 220V 50 60Hz with AC DC external adapter 110V upon request Max Power Consumption 13 2 Watt CE The HUMATEMP is CE marked in accordance with the following directives 73 23 CEE EMC 89 336 CEE 92 31 CEE and 93 68 CEE 414 User Manual HUMATEMP Human Gesellschaft fur Biochemica und Diagnostica mbH Max Planck Ring 21 D 65
Download Pdf Manuals
Related Search