Home

Full HD IP Camera - PLANET Technology Corporation.

Contents

1. to obtain a signed certificate from CA 25 e d htp 11192 168 0 20 flangl fserver_createrequest html Windows Internet Explorer E e l 192 168 0 20 Create Certificate Request Country State or province Locality Organization Organizational Unit Common Name Provide the request information in the create dialog Please refer to the following Provide the Certificate Information for more details When the request is complete the subject of the Created Request will be shown in the field Click on lt Properties gt below the Subject field copy the PEM formatted request and send it to your selected CA When the signed certificate is returned install it by uploading the signed certificate Provide the Certificate Information To create a Self signed HTTPS Certificate or a Certificate Request to CA please enter the information as requested SY Greate Seif Signed Certificate Country State or Province Locality Organization Organizational Unit Common Name Valid Day e Country Enter a two letter combination code to indicate the country the certificate will be used in For instance type in US to indicate United States e State or province Enter the local administrative region 26 e Locality Enter other geographical information e Organization Enter the name of the organization to which the entity identified in Common Name belongs e Organiza
2. IPv6 Address Configuration With IPv6 support users can use the corresponding IPv6 address for browsing Enable IPv6 by checking the box and click on lt Save gt to complete the setting 4 3 3 2 Qos The QoS Quality of Service setting can be found under this path System gt Network gt QoS ELANET Syster Full HD IP CAMERA System Qos Security DSCP Settings Video DSCP 0 Network l Audio DSCP 0 Basic Management DSCP 0 Cos Pod SNMP UPnP DONS Mail FTP HTTP Motion detection Network failure detection Tampering Storage management Recording File location View information Factory default Software version Software upgrade QoS allows providing differentiated service levels for different types of traffic packets which guarantees delivery of priority services especially when network congestion occurs Adapting the Differentiated Services DiffServ model traffic flows are classified and marked with DSCP DiffServ Codepoint values and thus receive the corresponding forwarding treatment from DiffServ capable routers DSCP Settings The DSCP value range is from O to 63 The default DSCP value is 0 which means DSCP is disabled The IP Camera uses the following QoS Classes Video Audio and Management 33 e Video DSCP The class consists of applications such as MJPEG over HTTP RTP RTSP and RTSP HTTP e Audio DSCP This setting is only available for the
3. PLANET Networking 4 Communication User s Manual on H 264 Full HD Fixed Dome IP Camera gt ICA HM131 ICA HM131R DI ANET Waar PLANET com Da Copyright Copyright C 2012 PLANET Technology Corp All rights reserved The products and programs described in this User s Manual are licensed products of PLANET Technology This User s Manual contains proprietary information protected by copyright and this User s Manual and all accompanying hardware software and documentation are copyrighted No part of this User s Manual may be copied photocopied reproduced translated or reduced to any electronic medium or machine readable form by any means by electronic or mechanical Including photocopying recording or information storage and retrieval systems for any purpose other than the purchaser s personal use and without the prior express written permission of PLANET Technology Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications and makes no warranty and representation either implied or expressed with respect to the quality performance merchantability or fitness for a particular purpose PLANET has made every effort to ensure that this User s Manual is accurate PLANET disclaims liability for any inaccuracies or omissions that may have occurred Information in this User s Manual is subject to change without notice and does
4. Recording for activation AN Please format the Micro SD SDHC card when using for the first time Formatting will also be required when a memory card already being used on one camera and later transferred Note to another camera with different software platform Device information When users insert the Micro SD SDHC card the card information such as the memory capacity and status will be shown at Device Information section When the memory card is successfully installed the memory card status shall be shown at lt Device information gt section in the Storage Management page Device setting Click on the lt Format gt button to format the memory card Disk cleanup setting Users can enable automatic recordings cleanup by specifying the time and storage limits Recording List Each video file on the Micro SD SDHC card will be listed in the Recording list The maximum file size is 60 MB per file When the recording mode is set as lt Always gt consecutive recording and the Micro SD SDHC card recording is also allowed to be enabled by events triggered once events occur the system will immediately implement events recording to the memory card Then the IP Camera will return to the regular recording mode after events recording e Remove To remove a file select the file first and then click on the lt Remove gt button e Sort Click on the lt Sort gt button and the files in the Recording list will be listed in name
5. Tampering Alarm Users are able to turn on off Tampering Alarm function in Tampering Alarm setting page The default setting is Off 45 Tampering Duration Minimum Tampering Duration is the time for video analysis to determine whether camera tampering has occurred Minimum Duration could also be interpreted as defining the Tampering threshold longer duration represents higher threshold Settable Tampering Duration time range is from 10 to 3600 seconds The Default value is 20 seconds Triggered Action Multi option The Administrator can specify alarm actions that will take when tampering is detected All options are listed as follows e Enable Alarm Output Check the item and select the predefined type of alarm output to enable alarm output when tampering is detected e Record stream to SD Card Select this item and the Tampering Alarm recording will be stored in Micro SD SDHC card when tampering is detected Pre trigger buffer recording function allows users to check what happened to cause the trigger The pre trigger buffer time range is from 1 to 3 seconds Select lt Upload for sec to set the recording duration after tampering occurs The setting range is from 1 to 99999 seconds Select lt Upload during the trigger active gt to record the triggered video until the trigger is off AN NOTE Please make sure the local recording with Micro SD SDHC card is activated so that this function can be implemented R
6. again and all the finding IP devices will be listed in the page as shown in the figure below The IP Camera s default IP address is 192 168 0 20 a Planet Device Search Search Method Project Filter e Local Broadcast 1 device s found ALL C IP Relay TCF y Device Search Netmask Mac IC4 HM131 ICA HM131 Planet Fixed Dome EI 255 255 255 0 00 30 4F 05 20 C7 Step 4 Double click or right click and select Browse to access the camera directly via web browser E Planet Device Search E E El Search Method Project Filte 1 dewice s found Ze Local Broadcast ALL z Cire EM Device Search CECI be IFE Fa Je ICA HM131 ICA HM131 Planet Fired Dome 182168020 on 255 255 255 0 00 30 4F 05 20 C7 Detail Info Network Setup Step 5 Then the prompt window of request for entering default username and password as shown below will appear for logging in to the IP Camera Connect to 192 168 0 20 PLANET IP Camera User name E e Remember my password Cancel oe The default login ID and password for the Administrator are Login ID Password NOTE ID and password are case sensitive NOTE It is strongly advised that administrator s password be altered for the security AN concerns Refer to section 4 3 2 Security for further details Additionally users can change the IP Camera s network property either DHCP or Static IP dire
7. generates relatively enhanced noise reduction The proprietary Smart Picture Quality SPQ video processing method could drastically minimum motion blur and reduce noise especially in low light environment The combination of SPQ and 3DNR at different level further yields exceptional video performance in various conditions The Noise Reduction function is configurable with the following options 3DNR Low 3DNR Mid 3DNR Hi SPQ SPQ 3DNR Low SPQ 3DNR Mid to SPQ 3DNR Hi Click on lt Y gt to confirm the new setting 4 5 8 TV System Setup 25 fps PAL Select the video format that matches the present TV system Click on lt Y gt to confirm the new setting e A 4 6 Logout Press the tab Logout in the top of the page and the login window will pop up This enables login with another user name The server 192 166 0 20 at MegapmellP Camera requires a vememe and password Warming This server is requesting that your usememe and pasword be sent in am insecure manner basic authentication without a secure connection User name Password _74 Appendix A IP Camera Specifications Video Specification Scan Method Video Encoder H 264 M JPEG Rate Control VBR Variable Bit Rate Video Resolution H 264 1080p 720p M JPEG 1080p 720p D1 CIF Environment Specifications e Appendix B Internet Security Settings If ActiveX control installation is blocked please either se
8. System gt Maintenance Home System streaming FUN NO IP CAMERA Maintenance Export Files Export configuration files Export Upload Files Ha Select configuration files FTP HTTP Application Motion detection Hetwork failure detection Ssiorage management Recording File location e View information Factory default Software version Software upgrade P Maintenance Users can export configuration files to a specified location and retrieve data by uploading an existing configuration file to the IP Camera Export Users can save the system settings by exporting the configuration file bin to a specified location for future use Click on the lt Export gt button and the popup File Download window will come out Click on lt Save gt and specify a desired location for saving the configuration file Upload To copy an existing configuration file to the IP Camera please click on lt Browse gt to select the configuration file first and then click on the lt Upload gt button for uploading 60 4 4 Video and Audio Streaming Settings Press the tab Streaming in the top of the page and the configurable video and audio items will display in the left column In Streaming the Administrator can configure specific video resolution video compression mode video protocol audio transmission mode etc Further details of these settings will be specified in the following sections 4 4 1 Video
9. Click the upgrade bution to start ihe upgrade process Upgrade AN NOTE Do not change the upgrade file name or the system will fail to find the file Step 2 Pull down the upgrade binary file list and select the file you want to upgrade in this case select userland jffs2 Step 3 Press Upgrade The system will first check whether the upgrade file exists or not and then begin to upload the upgrade file Subsequently the upgrade status bar will display on the page When it runs to 100 the upgrade process is finished Se System Upgrade Security System is in Process of upgrade bRetwwcork Please Don t Power Off The System And Change The Page DONS TET LTE Upgrade now Please wait _ HTTP L Application Motion detection MHetwork failure detection Storage management Recording rile locaton LF kif d OI GU AH inforn CPLA I Factory default Software version After the upgrade process is finished the viewer will return to Home page Step 4 Close the video browser Step 5 Click Control Panel and then double click Add or Remove Programs In the Currently install programs list select DCViewer and click the button Remove to uninstall the existing DC Viewer Step 6 Open a new web browser re login the IP Camera and then allow the automatic download of DC Viewer 59 4 3 18 Maintenance The Maintenance setting can be found under this path
10. DDNS page http www planetddns com index php Note 4 3 5 Mail The Administrator can send an e mail via Simple Mail Transfer Protocol SMTP when motion is detected SMTP is a protocol for sending e mail messages between servers SMTP is a relatively simple text based protocol where one or more recipients of a message are specified and the message text is transferred The configuration page is shown as follows System Full HD IP CAMERA System Mail Security d MTP Network 7 DONS FTP HTTP O ist SMTP SSL end recipient email address O 2nd SMTP SSL View information Factory default Software version Motion detection Network failure detection Tampering Storage management Recording File location Software upgrade Maintenance Two sets of SMTP can be configured Each set includes SMTP Server Account Name Password and E mail Address settings For SMTP server contact your network service provider for more specific information 4 3 6 FIP The Administrator can set as sending alarm message to a specific File Transfer Protocol FTP site when motion is detected Users can assign alarm message to up to two FTP sites The FTP setting page is shown below Enter the FTP details which include server server port user name password and remote folder in the fields Press Save when finished 3 amp 8 System Security Network DONS Mail FTP HTTP Motion detection Network failure detect
11. My mm dd Time 00 00 00 hh mm ss Host Name planet Fixed Dome Start time VO DU UL End time NTP server 0 0 0 0 host name or IP address The name is for camera identification If Motion Detection function is enabled and is set to send alarm message by Mail FTP the host name entered here will display in the alarm message Time Zone Select the time zone you are in from the drop down menu Enable Daylight Saving Time 2 To enable DST please check the item and then specify time offset and DST duration The format for time offset is hh mm ss for instance if the amount of time offset is one hour please enter 01 00 00 into the field Sync With Computer Time Select the item and video date and time display will synchronize with the PC s Manual The Administrator can set video date time and day manually Entry format should be identical with that shown next to the enter fields Sync with NTP server Network Time Protocol NTP is an alternate way to synchronize your camera s clock with a NTP server Please specify the server you wish to synchronize in the enter field Then select an update interval from the drop down menu For further information about NTP please see the web site www ntp org 4 3 2 Security Click the category lt Security gt and the page is shown as the figure below 4 3 2 1 User GUST System Full HD IP CAMERA gt El Security Security Admin Password
12. Tools Help C Back hi 4 EN ai eo pp Search 57 Favorites ES ddress 192 168 0 250 General e IP address This is necessary for network identification e Subnet mask It is used to determine if the destination is in the same subnet The default value is 255 255 255 0 e Default gateway This is the gateway used to forward frames to destinations in different subnet Invalid gateway setting will fail the transmission to destinations in different subnet e Primary DNS Primary DNS is the primary domain name server that translates hostnames into IP addresses e Secondary DNS Secondary DNS is a secondary domain name server that backups the primary DNS e Web Server port The default web server port is 80 Once the port is changed the user must be notified the change for the connection to be successful For instance when the Administrator changes the HTTP port of the IP Camera whose IP address is 192 168 0 100 from 80 to 8080 the user must type in the web browser http 192 168 0 100 8080 instead of http 192 168 0 100 Advanced e RTSP port RTSP port could be set from 1 to 65535 Normal Setting Port 554 1024 65535 e MJPEG over HTTP port The default setting of HTTP Port is 8008 setting range 1024 65535 e HTTPS port The default setting of HTTPS Port is 443 the setting range is from 1024 to 65535 ee AN NOTE Be aware to choose the different port from the one set for the web server port
13. a Admin password AA Confirm password AA Save IP filter p IEEE 602 1 Add User DDNS User password Mail VO access C Camera control FTP Talk O Listen Add HTTP Motion detection Manage User Network failure detection User name no user v Delete Edit Tampering Storage management Recording File location View information Factory default Software version Software upgrade De Root password Change the administrator s password by inputting the new password in both text boxes The input characters numbers will be displayed as dots for security purposes After clicking lt Save gt the web browser will ask the Administrator for the new password for access The maximum length of the password is 14 digits AN NOTE The following characters are valid A Z a z 0 9 amp _ Add user Type the new user s name and password and click lt Add gt to add the new user Both user name and password can be up to 16 characters The new user will be displayed in the user name list There is a maximum of twenty user accounts Each user can be assigned the privileges of Camera control and or Listen e UO access This item supports fundamental functions that enable users to view video when accessing to the camera e Camera control This item allows the appointed User to change camera parameters on the Camera Setting page e Listen Listen functions allow the administrator hear th
14. and date order _ 50 AN The capital letter A M R appears in the very beginning of name denotes the sort of the recording A stands for Alarm M stands for Motion R stands for regular recording Note e Download To open download a video clip select the file first and then click on the lt download gt button below the Recording list field The selected file window will pop up Click on the AVI file to directly play the video in the player or download it to a specified location 4 3 12 Recording Local Recording The Recording setting can be found under this path System gt Recording In the Recording setting page users can specify the recording schedule that fits the present surveillance requirement System Fuil HD IP CAMERA System Recording Security Recording Schedule Disable Network O Always DDNS Only during time frame Mail Weekday Starttime Duration d Sue a E a eee FIP J 2 2 Ss ES 3 HTTP A a Ss a the one one Motion detection DQ E Gees 5 a oe me Network failure detection T gt a pa D kt j Tampering HB see ee e m eee Storage management ID SE SS j Sun Mon Tue Sal Recording ce Start time 00 00 File location Save Delete View information Factory default Sofware version Software upgrade Maintenance Activating Micro SD SDHC Card Recording Two types of schedule mode are offered Always and Time Frame setting Users can
15. bitrate 1024 kbps high compression law quality 80 Appendix D Frequently Asked Questions Q1 Ans Q2 Ans Q3 Ans Q4 Ans Q5 Ans ICA HM131 131R How can I know the IP address of IP camera The default IP address is 192 168 0 20 and you could use the Device Search utility on the bundled CD to obtain the current IP address of IP camera Please refer to the user s manual for more detail information ICA HM131 131R How to supply power to ICA HM131 131R The LAN socket of IP Camera is compliant with IEEE802 3af standard PoE interface and IP Camera is necessary supplied power through PoE Switch Hub device ICA HM131 131R How to adjust the fouce and angle of lens Use the L type spanner in the bundled package to unscrew the cover Loosen the focus fixed screw and rotate the lens counter clockwise to adjust focus loosen the tilt fixed screw and adjust the camera s tilt angle You could get detail descriptions on the user s manual ICA HM131 131R How to reset IP camera to default setting The Reset button at the side of lens Use the L type spanner in the bundled package to unscrew the cover at first and press the button with a proper tool to default setting ICA HM131 131R Why there are scroll lines at live video Please according to your local TV system and go to Camera page to select NISC or PAL video format LS
16. granted this privilege by the Administrator Speaker Press the d button to mute activate the audio Video Pause Restart Press the e stop button to disable video streaming the live video will be displayed as black Press the restart bu show the live video again Recording Press the e button to save video recordings from the Live View to the specified location 8 20 4 3 System Related Settings The figure below shows all categories under the System tab Each category in the left column will be explained in the following sections AN NOTE The System configuration page is only accessible by the Administrator 4 3 1 Host Name and System Time Setting Press the first category lt System gt in the left column the page is shown as below System Security Network Time zone GMT 00 00 Gambia Liberia Morocco England DDNS Mail Sere Ree a Enable daylight saving time Als time offset 01 00 00 AAA Start date Jan ist Motion detection End date Jar isi Network failure detection Tampering Syne with computer time Storage management Recording PC time 16 47 29 File location Manual View information Factory default Software version Sync with NTP server software upgrade Maintenance Update interval Every hour ze Host Name hh mm ss i d PC date 2014 05 21 Myy mmda Date 2010 04 01
17. including multicast IP address H 264 video port MJPEG video port audio port and TTL into each blank Click Save to confirm the setting 4 4 5 Video Frame Rate Video frame skipping is for saving bandwidth if necessary The setting page is shown as below Video Format Video Frame Rate Video Compression MJPEG Frame Rate Setting Video RO MJPEG frame rate 25 Save Video OCX Protocol Video Frame Rate H264 1 Frame Rate Setting H264 1 frame rate 25 Save Video Mask Audio H264 2 Frame Rate Setting H264 2 frame rate 25 Save H264 3 Frame Rate Setting H264 3 frame rate 25 save i i H264 4 Frame Rate Setting H264 4 frame rate 25 Save i i Video frame rate is for setting the frames per second fps if necessary MJPEG H 264 1 H 264 2 H 264 3 H 264 4 Frame Rate The default setting of MJPEG H 264 1 H 264 2 H 264 3 H 264 4 Frame Rate is 30 fps the setting range is from 1 to 30 AN NOTE Lower frame rate will decrease video smoothness 66 4 4 6 Video Mask The Video Mask setting can be found under this path Streaming gt Video Mask Video Format Mask Video Compression Active Mask Function O Enable to display Mask O Enable to display Mask O Enable to display Mask3 C Enable to display Mask4 Video ROI Video OCX Protocol Video Frame Rate eee C Enable to display Mask5 Audio Mask Setting Mask color Active Mask
18. mouse to the center of the frame can shift the frame to the intended location e Enable Stream 4 ROI Setting Check the box and Stream 4 ROI Window will be displayed To change the size of Stream 4 ROI Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the mouse to the center of the frame can shift the frame to the intended location 4 4 4 Video OCX Protocol In the Video OCX protocol setting page users can select RTP over UDP RTP over TCP RTSP over HTTP or MJPEG over HTTP for streaming media over the network In the case of multicast networking users can select the Multicast mode The page is shown as follows Video Format Video OCX Protocol Video Compression Video OCX protocol setting 3 O RTP over UDP RTP over RTSP TCP RTSP over HTTP MJPEG over HTTP SS Multicast mode Audio Multicast IP Address D Multicast H 264 1 Video Port c Multicast H 264 2 Video Portlo Multicast H 264 3 Video Portlo Multicast H 264 4 Video Port c Multicast MJPEG Video Port c Multicast Audio Port Multicast TTL Note This page only applies to video streams going to a DC Viewer Video ROI Video OCX Protocol Video Frame Rate AAA AY Video OCX protocol setting options include e RTP over UDP RTP over RTSP TCP RTSP over HTTP MJPEG over HTTP Select a mode according to your data delivery requirements 65 e Multicast Mode Enter all required data
19. not represent a commitment on the part of PLANET PLANET assumes no responsibility for any inaccuracies that may be contained in this User s Manual PLANET makes no commitment to update or keep current the information in this User s Manual and reserves the right to make improvements to this User s Manual and or to the products described in this User s Manual at any time without notice If you find information in this manual that is incorrect misleading or incomplete we would appreciate your comments and suggestions CE mark Warning The is a class B device In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures WEEE Warning To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment end users of electrical and electronic equipment should understand the meaning of the crossed out wheeled bin symbol Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately Trademarks The PLANET logo is a trademark of PLANET Technology This documentation may refer to numerous hardware and software products by their trade names In most if not all cases their respective companies claim these designations as trademarks or registered trademarks sie Revision User s Manual for PLANET H 264 Full HD Fixed Dome IP Camera
20. program DeviceSearch exe which can be found in DeviceSearch folder in the supplied CD AN NOTE Please make the record of the IP Camera s MAC address which can be found in the label of the camera for identification in the future Use fixed IP address To setup static IP address select Use fixed IP address and move the cursor to the IP address blank as indicated below and insert the new IP address ex 192 168 0 250 then go to the Default gateway explained latter blank and change the setting ex 192 168 0 250 Press Save to confirm the new setting System Network l Wenelal A rit Get IP address automatically E tias Use fixed IP address Basic 192 168 0 13 Cos SNMP UPnP Primary DNS 192 168 0 1 DDNS secondary DNS 0 0 0 0 Mail Use PPPoE FTP User name HTTP Password Motion detection IP address J Network failure detection Tampering Advanced i ipe Web Server port 60 storage management j C RTSP port 554 Recording MJPEG over HTTP port 8008 File location HTTPS port 443 View information Save Factory default pera IPv6 Address Configuration Software version C Enable IPv6 Address Software upgrade When using static IP address to login to the IP Camera users can access it either through DeviceSearch software see Chapter 3 Accessing Camera or input the IP address in the URL bar e and press Enter File Edit View Favorites
21. select ranging from 12 to 13 Click on lt y gt to confirm the new setting 4 5 4 Backlight The Backlight Setting can be found under this path Camera gt Backlight Backlight Of The Backlight Compensation function prevents the center object from being too dark in surroundings where excessive light is behind the center object Click on lt Y gt to confirm the new setting 4 5 5 Digital Zoom The Digital Zoom Setting can found under this path Camera gt Digital Zoom Digital Zoom The camera s digital zoom is adjustable from x2 to x8 Click on lt Y gt to confirm the new setting 4 5 6 WDR Function The WDR Function Setting can be found under this path Camera gt WDR Function WDR Function TD The Wide Dynamic Range WDR function is for solving high contrast or changing light issues so that enhances better video display The WDR is adjustable from Low Mid to Hi Higher level of WDR represents wider dynamic range so that he IP Camera can catch a greater scale of brightness Click on lt y gt to confirm the new setting 4 5 7 Noise Reduction The Noise Reduction Setting can be found under this path Camera gt Noise Reduction Noise Reduction The IP Camera provides multiple lt Noise Reduction gt options for delivering optimized image quality especially in extra low light conditions Different level options for 3D Noise Reduction DNR include Low Mid and High Higher level of 3DNR
22. setup the time frame to fit the recording schedule or choose lt Always gt to activate Micro SD SDHC Card Recording all the time Please click on the lt Save gt button for confirming the schedule mode ai Terminating Micro SD SDHC Card Recording Select lt Disable gt to terminate the recording function 4 3 13 File Locatioin Users can specify a storage location for the snapshots and live video recording The default setting is C Once confirm the setting press Save and all the snapshots and recording will be saved in the designate location system File Location Security Set the destination of snapshot photos and recorded video files Heiwork All files stored at EN DDNS Mail FTP HTTP Motion detection Network failure detection Tamperinyg Storage management Recording File location View information Factory default Software version sofware upgrade Maintenance AN Please make sure the selected file path contains valid characters such as letters and numbers Note 4 3 14 View information Click on the link to view the system log file The content of the file provides useful information about configuration and connections after system boot up 4 3 14 1 Log File The View Log File function can be found under this path System gt View Log File 52 PLANET Full HO IP GAMERA System System log Security Tue May 22 11 12 00 2012 Network interface in
23. E Mail 1 ze Pre trigger buffer Post trigger buffer TT Continue image upload Upload for 1 sec Upload during the trigger active Image frequence NOTE Make sure SMTP or FTP configuration has been completed See section 4 3 5 Mail AN and 4 3 6 FTP for further details Send HTTP notification Check this item select the destination HTTP address and specify the parameters for event notifications by lt Motion Detection gt triggered When an alarm is triggered the notification can be sent to the specified HTTP server For instance if the custom parameter is set as action 1 amp group 2 and the HTTP server name is http 192 168 0 1 admin php the notification will be sent to HTTP server as http 192 168 0 1 admin php action 1 amp group 2 when alarm is triggered File Name The uploaded image s filename format can be set in this section Please select the one that meets your requirements Save Click the Save button to save all the Motion Detection settings mentioned above 4 3 9 Network failure detection Network Failure Detection allows the IP Camera to ping another IP device e g NVR VSS Video Server etc within the network periodically and generates some actions in case of network failure occurs for instance a Video Server is somehow disconnected The Tampering setting can be found under this path System gt Network failure detection ie o system Network failure detection Securit
24. Function e Add a Mask Check a Video Mask checkbox and a red frame will come out in the Live Video pane at the right side Use the mouse to drag and drop to adjust the mask s size and place it on the target zone AN NOTE It is suggested to set the Video Mask twice bigger than the object e Cancel a Mask Uncheck the checkbox of the Video Mask meant to be deleted and the selected mask will disappear from the Live Video pane instantly Mask Setting e Mask color The selections of Mask color include red black white yellow green blue cyan and magenta Click lt Save gt to confirm the setting 4 4 7 Audio Mode and Bit Rate Settings The audio setting page is show as below In the Audio page the Administrator can select one transmission mode and audio bit rate z Video Format Audio Video Compression Transmission Mode Simplex Listen only Disable Server Gain Setting Video Frame Rate Input gain Video Mask Bit Rate 32 Kbps Video ROI Video DCX Protocol Transmission Mode e Simplex Listen only In the Listen only Simplex mode the local remote site can only listen to the other site e Disable Select the item to turn off the audio transmission function Server Gain Setting Set the audio input output gain levels for sound amplification The audio gain values are adjustable from 1 to 6 The sound will be turned off if the audio gain is set to Mute Bit Rate Selectable audio t
25. Help Then the security warning window will pop up Click Install to carry on software installation Click Finish to close the DC Viewer window when download is finished For the detailed software download procedure please refer to Appendix C DC Viewer Download Procedure Once login to the IP Camera users will see the Home page as shown below DER rsen searing camere ooo Full DIP CAMERA Languages 2012 05 21 16 25 an fs Pi FC LC z vib vr pkk hh tal Video format H 264 1 H 264 2 xj jm e MJPEG bitrate low compression high quality H 264 1 bitrate 4096 kbps middle compression H 264 2 bitrate 1024 kbps high compression low quality H 264 3 bitrate 1024 kbps high compression low quality H 264 4 bitrate 1024 kbps high compression low quality 3 5 Administrator User Privileges Administrator represents the person who can configure the IP Camera and authorize users access to the camera User refers to whoever has access to the camera with limited authority i e entering Home and Camera setting pages 3 6 Lens Adjustment The image displays on the Home page when successfully accessing to the IP Camera Adjust the camera s focus to produce a clear image Please refer to the procedure below Step 1 Unscrew the IP Camera s cover Q PLANET Networking amp Communication s 16 Step 2 Loosen the focus fixed screw and rotate the lens
26. IP Cameras that support audio e Management DSCP The class consists of HTTP traffic Web browsing NOTE To enable this function please make sure the switches routers in the network support QoS 4 3 3 3 SNMP The SNMP Simple Network Management Protocol setting can be found under this path System gt Network gt SNMP System SNMP Settings a SNMP v1 v2 Enable SNMP v1 Network Enable SNMP v2 Basic p me Read Community public QoS i Write Community public SNMP UPnP Traps for SNMP v1fv2 DONS LJ Enable tra ps sii Trap address Trap community Trap Option Warm start Motion detection Network failure detection Save Tampering Storage management Recording File location View information Factory default Software version Software upgrade my oe With Simple Network Management Protocol SNMP support the IP Camera can be monitored and managed remotely by the network management system SNMP v1 v2 e Enable SNMP v1 v2 Select the version of SNMP to use by checking the box e Read Community Specify the community name that has read only access to all supported SNMP objects The default value is public e Write Community Specify the community name that has read write access to all supported SNMP objects except read only objects The default value is write Traps for SNMP v1 v2 Traps are used by the IP Camera to send massages to a management system for im
27. Model ICA HM131 ICA HM131R V2 Rev 1 0 0 2012 May Part No EM ICAHM131 Series TABLE OF CONTENTS Chapter L Introduccion ed 6 REKT 6 Package Conti A luce na S 7 Physical Detallada 7 TOD VW 7 SIS EE 8 Chapter 2 Preparations for IP Cameam Setup ccooncconncononccncnccnnnconanccnanononnnenanrnnannnas 9 Physical Installation Requirement cccccssesseeeseesseeeeesseeeeenseeeeenseeeeeeaseeeoesseeseenseesonseeenonaseeees 9 2 1 SYSTEM Regu irementS ee daeboasiesaveweuvetinneeeasteevudeubeaveudetnayenduesbusdeweues 9 2 2 ENEE GETDEEHEEE eege ee 9 2 3 POE GCOMMGCUON aec sea ieee 9 Chapter 3 ACCESSING CamMmera cccccssseccessescenseecenseseenseseeneesenseseanseseeneesensessensesees 11 3 1 DEVice Search SoftWare Setup uan dd lia 11 3 2 Re WE 12 3 3 Example of Changing IP Camera s Network Property ccssssseseeeeeeseeeeeesseeeeeeeeeeeenneeeees 13 3 4 Installing DC Viewer Software ONnIine ccccccccsssssssseeeeeeeeeeeeesnseeeeeeeeeesseeeeeeeeseeoensneeeeees 15 3 5 Administrator User Privileges ccccsssseessesseeesenseeeeeeseeeeeenseeeenseeeeeeseeeeeeaseeseenseeenenseesnonas 16 3 6 LenS AQUI MON Esti A AA a 16 Chapter 4 Configuration amp Operation cccccessecseeseeseeseeseeneeseeseesenseesenseeseneees 18 4 1 Browser based Viewer Introduction cccccccssesseeeseeeesseeeeeeenseeeeeenseeesseesseesseoeenseeesens 18 4 2 Home Pale i 19 43 System Related Settings i
28. TTP server as http 192 168 0 1 admin php action 1 amp group 2 when alarm is triggered AF x File Name Enter a file name in the blank ex image jpg The uploaded image s file name format can be set in this section Please select the one that meets your requirements Add date time suffix File name imageYYMMDD_HHNNSS_XX jpg Y Year M Month D Day H Hour N Minute S Second X Sequence Number e Add sequence number suffix no maximum value File name imageXXXXXXX jpg X Sequence Number e Add sequence number suffix up to and then start over File Name imageXX jpg X Sequence Number The file name suffix will end at the number being set For example if the setting is up to 10 the file name will start from 00 end at 10 and then start all over again o Overwrite The original image in the FTP site will be overwritten by the new uploaded file with a static filename Save Click on the lt Save gt button to save all the Tampering Alarm settings mentioned above ASE one System Full HO IP CAMERA gt system Tampering Alarm Security Tampering Alarm Network off Qon Tampering Duration DDNS Minimum duration 20 sec Mail e Triggered Action fle TT Record stream to sd card TT Send message by FTP HTTP C Send message by E Mail C Upload image by FTP Motion detection LJ Upload image by E Mail C Send HTTP notification File Nam Hetwork failure detection lala Fil
29. Up 10 Motion Detection Windows can be set Press the add button under the Live View Pane to add a Motion Detection Window To cancel a Motion Detection Window move the mouse cursor to the selected Window and click on the delete button If Motion Detection function is activated the pop off wndow Motion with indication of motion will be shown A0 Detailed settings of Motion Detection are described as follows Motion Detection You will be able to turn on off Motion Detection in System section Default setting is Off Motion Detection Setting Users could adjust various parameters of Motion Detection in this section e Sampling pixel interval 1 100 The default value is 10 which means system will take one sampling pixel for every 10 pixel e Detection level 1 100 The default level is 10 The item is to set detection level for each sampling pixel the smaller the value the more sensitive it is e Sensitivity level 1 100 The default level is 80 which means if 20 or more sampling pixels are detected differently system will detect motion The bigger the value the more sensitive it is Meanwhile when the value is bigger the red horizontal line in the motion indication window will be lower accordingly e Time interval sec 0 7200 The default interval is 10 The value is the interval between each detected motion BEA Users could adjust the parameter and level of Motion Detection Settings e Sa
30. ampering white balance bgain lt 54 gt Storage management brightness value lt 128 gt Recording sharpness value lt 4 gt File location p EE contrast value lt 64 gt Log file saturation lt 64 gt w User information E Parameters Factory default Software version Software upgrade Maintenance Click on this item to view the entire system s parameter setting 4 3 15 Factory Default The factory default setting page is shown as below Follow the instructions to reset the IP Camera to factory default setting if needed _ 54 system Factory default A iD Security woe Restore factory settings and lose any changes Patada System will restart and need installer program to setup network DDNS Mail Full Restore FIP HTTP Restore factory settings excluding network settings Motion detection Network failure detection Partial Restore Tampering Storage management Reboot the system Recording File location View information Factory default Software version Software upgrade Maintenance Set Default Click on the Set Default button to recall the factory default settings Then the system will restart in 30 seconds A The IP address will be restored to default Note Reboot Click on the Reboot button and the system will restart without changing current settings 55 4 3 16 Software Version The current software version is displayed in the
31. and select audio compression mode in this page Camera setting Users can adjust various camera parameters including lt Exposure gt lt White Balance gt lt Brightness gt lt Sharpness gt lt Contrast gt and lt Digital Zoom gt Logout Click on the tab to re login the IP Camera with another username and password 4 2 Home Page In the Home page there are several function buttons right down the displayed image Languages v 2012 05 21 16 25 e i Video format H 264 1 O H 264 2 241 3 4 aj e MJPEG bitrate low compression high quality H 264 1 bitrate 4096 kbps middle compression H 264 2 bitrate 1024 kbps high compression low quality H 264 3 bitrate 1024 kbps high compression low quality H 264 4 bitrate 1024 kbps high compression low quality Screen Size Adjustment Image display size can be adjusted to x1 2 and full screen 19 Digital Zoom Control In the full screen mode users can implement digital Zoom by right clicking the mouse rotating the mouse wheel for zoom in out and dragging the mouse into any direction Snapshot Press the e button and the JPEG snapshots will automatically be saved in the appointed place The default place of saving snapshots is C Talk Talk function allows the local site talks to the remote site Please refer to section 4 3 2 Security Add user gt Talk Listen for further details This function is only open to User who has been
32. ckage Content The contents of your product should contain the following items IP Camera Quick installation guide User s manual CD Accessories Kit Physical Details Top View Y PLANET Networking amp Communication 4 Tilt Fixed 2 Reset Button 3 Focus Fixed Screw Screw 5 Microphone Top View of ICA HM131 131R ooo olem o Deseggen O OS pt les Rotate the lens right left to adjust focus PJ Reset Button Restore to default setting press the button with a proper tool ER Focus Fixed Screw Loosen the screw to adjust the lens 4 Tilt Fixed Screw Loosen the screw to adjust tilt angle The IP Camera has built in an internal microphone This microphone is Microphone hidden in the internal case Side View 2 RJ 45 LAN Socket 1 Micro SD Card slot Side View of ICA HM131 131R tem scription OO EN Micro SD Card slot User can insert a micro SD card into this slot for event recording p The LAN socket is a RJ 45 connector for connections to 10 100Base TX Fast Ethernet cabling The LAN socket is compliant RJ 45 LAN Socket with IEEE802 3af standard PoE interface and IP Camera is necessary supplied power through PoE Switch Hub device Chapter 2 Preparations for IP Cameam Setup Physical Installation Requirement The notices and introduction on system installation will be described particularly in this chapter Please follow the description to operate the unit In orde
33. compression ratio is supported by system before setup 4 4 2 Video Compression The Video Compression setting can be found under this path Streaming gt Video Compression ANET or Toren _ EE Full HO IP CAMERA Video Format Video Compression MJPEG Compression setting MJPEG Q factor 50 Save Video Compression Video ROI Video OCX Protocol H 264 1 Compression setting H264 1 bit rate 4096 kbit s Save Video Frame Rate Video Mask Audio H N 64 2 Compression setting 264 2 bitrate 1024 kbit s Save ele H 264 3 Compression setting H264 3 bitrate 1024 kbit s Save H 264 4 Compression setting H264 4 bitrate 1024 kbit s Save o ER pression information setting Display Compression information in the home page Save CBR mode setting Y enable H 264 1 CBR mode Y enable H 264 2 CBR mode enable H 264 3 CBR mode enable H 264 4 CBR mode Save 63 Users can select a proper MJPEG H 264 compression mode on the video compression page depending on the application MJPEG Q Quality factor Higher value implies higher bit rates and higher visual quality The default setting of MJPEG Q factor is 35 the setting range is from 1 to 70 H 264 1 H 264 2 bit rate The default setting of H 264 1 H 264 2 is 4096 1024 kbps the setting range is from 64 to 8192 kbps Display Compression Information Users can also decide whether to display compression information on the H
34. counter clockwise to adjust focus loosen the tilt fixed screw and adjust the camera s tilt angle Focus Fixed Screw e HE Chapter 4 Configuration amp Operation The IP Camera is provided with a user friendly browser based configuration interface and a free bundled CV3L Cam Viewer Three Lite for record and playback video In this chapter information about main page introduction system related settings and camera settings will be described in detail 4 1 Browser based Viewer Introduction The figure below shows the Home page of the IP Camera s Viewer Window Setting Tabs mt Select Languages 2012 05 21 16 25 Time Display Video Display KANN Re ge le eh H 264 1 H 264 2 gt Video Format Display Mode Phase Record H 264 1 bitrate 4095 H 264 2 bitrate 1024 H 264 3 bitrate H 264 4 bitrate 1 Video Compression info 5 high compression low quality 5 high compression low qualit Snapshot Speaker There are five tabs Home System Streaming Camera and Logout on the top of the viewer window 18 Home Users can monitor live video of the targeted area System setting The administrator can set host name system time root password network related settings etc Further details will be interpreted in section 4 3 System Related Settings Streaming setting The administrator can modify video resolution and rotate type
35. ct for critical areas such as entrances or checkouts that need to be monitored in greater detail The ICA HM131 series can be managed by PLANET Cam Viewer Three the professional management software for multi camera video surveillance application to provide monitoring recording and event management functions The Cam Viewer Three enables you to setup a comprehensive and effective surveillance system quickly and easily With the ICA HM131 series managed by the Cam Viewer Three it provides an enhanced professional security environment to protect your property and life Product Features Camera e 1 2 7 progressive CMOS e Dual video stream H 264 and M JPEG video compression simultaneously Supports 1080p Full HD resolution 1920 x 1080 pixels e Compliant with IEEE 802 3af PoE interface e Supports ONVIF Standard to Simplify Integration and Enhance Interoperability Video amp Audio e 3GPP for 3G mobile remote applications Built in Microphone for one way audio e Supports Micro SD card storage Management Easy configuration and management via Windows Based utility or web interface e Cam Viewer Three Central management software supported DDNS PPPoE and FTP uploading supports more alternatives in surveillance network Feature Motion Detection feature can monitor any suspicious movement in specific area e Wide Dynamic Range WDR 3D Noise Reduction 3DNR function support Planet DDNS function support Pa
36. ctly in the device finding list Refer to the following section for changing the IP Camera s network property 3 3 Example of Changing IP Camera s Network Property Users can directly change an IP Camera s network property ex from static IP to DHCP in the finding device list The way to change the IP Camera s network property is specified below Step 1 In the finding device list click on the IP Camera that you would like to change its network property On the selected item right click and select Network Setup Meanwhile record the IP Camera s MAC address for future identification E Planet Device Search Search Method Project Filter fe Local Broadcast ALL IP Relay Device Search 1 dewice s toundi Mame Planet Fired Dome Detail Info Browse Network Setup Step 2 The Network Setup page will come out Select DHCP and press Apply button down the page Dr E Planet Device Search Search Method Project Filter e Local Broadcast ALL C IP Relay rr li Device Search E Network Setup P Bx ss pojes je Device Information 1C4 HM131 IC4 HMm131 op 1255255 255 Model ICA HM131 Project ICA H M131 Name Planet Fixed Domes MAC Die 0 89 05 20 07 1 devices found Network Property DHCP Static IP Control package sent Please try to re search the device after one minute Step 4 Click the Device Search butto
37. dvanced Select a Web content zone to specify its security settings amp o e Internet Local intranet Trusted sites Restricted sites Internet K This zone contains all Web sites you haven t placed in other zones Security level for this zone Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level Custom Level Default Level The Security Settings screen is displayed as below Security Settings Settings wl Activex controls and plug ins dl Automatic prompting For Activex controls J Disable Enable wl Binary and script behaviors _ Administrator approved _ Disable 3 Prompt wl Download unsigned Actives controls ry Pai e LI eg Reset custom settings Reset Fo Low Step 5 Under ActiveX controls and plug ins set ALL items as listed below to lt Enable gt or lt Prompt gt aff ActiveX controls and plug ins settings 1 2 3 4 5 Automatic prompting for ActiveX controls Binary and scrip behaviors Download signed ActiveX controls Download using ActiveX controls Initialize and script ActiveX not marked as safe Run ActiveX controls and plug ins Script ActiveX controls marked safe for scripting Step 6 Click lt OK gt to accept the settings and close the lt Security gt screen Step 7 Click lt OK gt to close the Internet Options screen Step 8 Close the browser windo
38. e name limage jpg TAnpa Add date time suffix Storage management Add sequence number suffix no maximum value Add sequence number suffix up to and then start over Overwrite i Save Recording File location View information Factory default Software version Software upgrade Maintenance 4 3 11 Storage Management Local Recording The Storage Management setting can be found under this path System gt Storage Management Full HD IP CAMERA Storage Management Security Device information RE Device type SD card Free space 0 KB Total size 0 KB dee Status No Full No mmm Device setting FTP Format device HTTP Disk cleanup setting Motion detection Enable automatic disk cleanup Network failure detection Remove recordings older than 1 day s Tampering Remove oldest recordings when disk is 185 Storage management Recording Recording list FileName Size File location View information Factory default Software version Software upgrade Maintenance Users can implement local recording to the Micro SD SDHC card up to 32GB This page shows the capacity information of the Micro SD card and a recording list with all the recording files saved on the memory card Users can also format the SD card and implement automatic recording cleanup through the setting page To implement Micro SD card recording please go to the lt Recording gt page refer to the section
39. e range roughly from 2700 7800K ATW Mode Auto Tracking White Balance With Auto Tracking White Balance function the white balance in a scene will be automatically adjusted while temperature color is changing The ATW Mode is suitable for environment with light source having color temperature in the range roughly from 2500 10000K Manual Mode In this mode users can change the White Balance value manually Users can select a number between 0 127 of Rgain Bgain item to gain the red blue illuminant on the Live Video Pane 4 5 3 Brightness Setting The Picture Adjustment can be found under this path Camera gt Picture Adjustment Picture Adjustment Brightness paul Brightness Users can adjust the image s brightness by adjusting the item Please select ranging from 12 to 13 To increase video brightness select a bigger number Click on lt V gt to confirm the new setting Te Sharpness Increasing the sharpness level can make the image looked sharper especially enhance the object s edge Please select ranging from 0 to 15 Click on lt Y gt to confirm the new setting Contrast Camera image contrast level is adjustable please select ranging from 6 to 19 Click on lt Y gt to confirm the new setting Saturation Camera image saturation level is adjustable please select ranging from 6 to 19 Click on lt y gt to confirm the new setting Hue Camera image hue level is adjustable please
40. e sounds in the local site PC site AN NOTE The IP Camera does not have the Talk function Manage User Delete user To delete a user pull down the user list and select the user name you wish to delete Then click lt Delete gt to remove it Edit user Pull down the user list and select a user name Click lt Edit gt to edit the user s password and privilege NOTE It is required to enter the User password as well as select the function open to the user When finished click lt Save gt to modify the account authority ee gt hitp 192 168 0 126 ang1 server_editaccount himl Win E 0 Xx User name User User password eeccceeece I O access E Camera control C Listen Save 4 3 2 2 HTTPS Syster Ful ADIP CAMERA System HTTPS Security Create self signed certificate ji Create Install signed certificate Create Certificate Request Upload signed certificate Upload HTTPS IP filter IEEE 802 1 Been Created Request deier Subject Mail Network No certificate request created FTP Properties Remove HTTP Installed Certificate Motion detection Subject No certificate installed Network failure detection Tampering Properties Remove Storage management Recording File location View information Factory default Software version Software upgrade lt HTTPS gt allows secure connections between the IP Camera and web browser using lt S
41. ecure Socket Layer SSL gt or lt Transport Layer Security TLS gt which ensure camera settings or Username Password info from snooping lt is required to install a self signed certificate or a CA signed certificate for implementing lt HTTPS gt 24 To use HTTPS on the IP Camera a HTTPS certificate must be installed The HTTPS certificate can be obtained by either creating and sending a certificate request to a Certificate Authority CA or creating a self signed HTTPS certificate as described below Create Self signed Certificate Before a CA issued certificate is obtained users can create and install a self signed certificate first hitp 192 168 0 20langl server_certificate html Windows Internet ET R E 192 168 0 20 Create Self Signed Certificate Country State or province Locality Organization Organizational Unit Common Name Valid days days 1 9999 ARAR Click on lt Create gt button under Create self signed certificate and provide the requested information to install a self signed certificate for the IP Camera Please refer to the last part of this section Provide the Certificate Information for more details AN The self signed certificate does not provide the same high level of security as when using a CA issued certificate Note Install Signed Certificate Click on the lt Create Certificate Request gt button to create and submit a certificate request in order
42. efer to Recording for further details e Send Message by FTP E Mail The Administrator can select whether to send an alarm message by FTP and or E Mail when tampering is detected O e Upload Image by FTP Select this item and the Administrator can assign a FTP site and configure various parameters When tampering is detected event images will be uploaded to the appointed FTP site lt Pre trigger buffer gt function allows users to check what happened to cause the trigger The lt Pre trigger buffer gt frame rate could be pre determined 46 On the other hand lt Post trigger buffer gt is for users to upload certain amount of images after tampering is triggered Check the box lt Continue image upload gt to upload the triggered images during certain time or keep uploading until the trigger is off Select lt Upload for __sec gt and enter the duration in the blank The images of the duration will be uploaded to FTP when tampering is triggered The setting range is from 1 to 9999 seconds Select lt Upload during the trigger active gt to make the images keep being upload to FTP during the trigger active until the tampering stops Set the Image frequency as the upload frame rate The setting range is from 1 frame to 15 frames AN NOTE Make sure FTP configuration has been completed Refer to FTP for further details e Upload Image by E Mail Select this item and the Administrator can assign an e mail address and configure var
43. format Video Resolution Video Deinterlace The Video Format setting can be found under this path Streaming gt Video Format Wideo Format Video Format Video Compression Video Resolution 2 H 264 H 264 ho Video ROI H 264 1 format 1920 x 1080 25 fps Video OCX Protocol H 264 2 format 720 x 576 25 fps M Video Frame Rate BNC rt NA NC support KN Video Mask Save Audio Note Image attachment by FTP or E mail will be available only while MJPEG streaming is selected Text Overlay Settings include date include time OD Include text string Video Rotate Type Normal video ho GOV Settings H 264 1 GOV Length 8 H 264 2 GOV Length 8 H 264 3 GOV Length 25 H264 4GOVLength 25 H 264 Profile H 264 1 Main profile H 264 2 Main profile B H 264 3 Main profile H 264 4 Main profile w 3 Video Format Under Video Resolution section the available video resolution formats are including MJPEG and H 264 Please refer to the Video Format for more combination details Click on lt Save gt to confirm the setting Text Overlay Settings Users can select the items to display data including date time text on the live video pane The maximum length of the string is 20 alphanumeric characters ei Click on lt Save gt to confirm the Text Overlay setting Video Rotate Type Users can change video display type if necessa
44. ii dans 21 4 3 1 Host Name and System Time Setting ccccccccsssssseeeeeeeeseceenseseeeseeeeeneees 21 4 3 2 SOC Midi Ee 22 4 3 3 Kiel 30 4 3 4 DON Sia AA A AA 37 4 3 5 Mal od 38 4 3 6 Ee 38 4 3 7 e E GE 39 4 3 8 MOTION Detection 40 4 3 9 Network failure detec ii ic 43 4 3 10 Tampering Aladino 45 4 3 11 Storage Management Local ReCording sseeeeessccsssseseeeeeseeeeeseeeeees 49 4 3 12 Recording Local RECOrGING sssaaa aa aa aaa id 51 4 3 13 File LOCA a aoe 52 4 3 14 VIEW tel Ui Le 1 aaa ae aaa rA 52 4 3 15 Factory Detalla ide 54 4 3 16 SOTMWAare VOS ION tii id 56 4 3 17 eil e EE 57 4 3 18 VIAIIMLG IAIN CO siini de ctseniseccsedidciecinecstcd seis aa aaa aaeain 60 4 4 Video and Audio Streaming SettingS ccccccccssssssseseeeeeeseceensnseeeeeeeeeensnseeeeeeeeeoensneeeeees 61 4 4 1 Video format Video Resolution Video Deinterlace oocccoonononccccooaaannnnos 61 4 4 2 VIdeo COMPFESSION EE 63 4 4 3 VIGGO RO ica 64 4 4 4 Video OCX PROLOG EE 65 4 4 5 VIGGO Frame Rated 66 4 4 6 VideO Mas Kind 67 4 4 7 Audio Mode and Bit Rate SettingS ccccccsssssssseeeeeeeeeeesenneeeeeeeeeensneeeeees 67 4 5 Camera O RT 69 4 5 1 EXDOSUNG SEMINO odds 69 4 5 2 White Bal nce Seti uri 70 4 5 3 Egeter Le EE 71 4 5 4 Back Atado 72 4 5 5 te fC UE e RE 72 4 5 6 WDR FUNCION iia 72 4 5 7 NoiSe begleete ee 73 4 5 8 PINAR 73 460 ett 74 Appendix A IP Camera SpecifiCations cccsecec
45. ion Network failure detection Tampering Storage management Recording File location View information Log file User information AS get user information Factory default get user privacy Software version Software upgrade Maintenance The Administrator can view each added user s login information and privileges refer to the section Security 53 Get User Information All the users in the network will be listed in the lt User information gt zone as User 4321 It indicates that one user s login username is User and password is 4321 Get User Privacy Click on lt get user privacy gt at the bottom of the page and the Administrator can view each user s privileges as User 1 1 0 1 1 1 0 1 I O access Camera control Talk Listen refer to the section Security I O access Camera control E Talk Listen Therefore it denotes the user is granted privileges of l O access Camera control and Listen 4 3 14 3 View Parameters The View Parameters function can be found under this path System gt View Parameter System Parameter list Security Mega Pixel Camera Initial Configuration File 4 Network A E E a E E E a ES E EEEE Camera setting DDNS SSS Eee e exposure mode lt auto gt FTP min shutter speed lt 8 gt HTTP fixed shutter speed lt 56 gt PELE i white balance mode lt auto gt Network failure detection white balance rgain EES T
46. ion Tampering Storage management Recording File location View information Factory default Software version Software upgrade Maintenance 4 3 7 HTTP Home System FTP FTP 1st FTP server 1st FTP server port 1st FTP user name 1st FTP password 1st FTP remote folder 2nd FTP server port 2nd FTP user name 2nd FTP password 2nd FTP remote folder Full TP CAMERA O ist FTP passive mode 2nd FTP server O 2nd FTP passive mode The HTTP setting can be found under this path System gt HTTP System Security Network DONS Mail FTP HTTP Motion detection Network failure detection Tampering Storage management Recording File location View information Factory default Software version software upgrade Maintenance Home System HTTP HTTP 1st HTTP server ist HTTP user name ist HTTP password 2nd HTTP server 2nd HTTP user name 2nd HTTP password Full HD IP CAMERA _ 39 A HTTP Notification server can listen for notification messages from IP Cameras by triggered events Enter the HTTP details which include server name for instance http 192 168 0 1 admin php user name and password in the fields lt Alarm gt triggered and lt Motion Detection gt notifications can be sent to the specified HTTP server Click on lt Save gt when finished 4 3 8 Motion De
47. ious parameters When tampering is detected event images will be sent to the appointed e mail address lt Pre trigger buffer gt function allows users to check what happened to cause the trigger The lt Pre trigger buffer gt frame rate could be pre determined On the other hand lt Post trigger buffer gt is for users to upload certain amount of images after tampering occurs Check the box lt Continue image upload gt to upload the triggered images during certain time or keep uploading until the trigger is off Select lt Upload for __sec gt and enter the duration in the blank The images of the duration will be uploading by E mail when tampering is triggered The setting range is from 1 to 9999 seconds Select lt Upload during the trigger active gt to make the images keep being upload to E mail during the trigger active until tampering stops Set the Image frequency as the upload frame rate The setting range is from 1 frame to 20 frames AN NOTE Make sure SMTP configuration has been completed Refer to Mail for further details e Send HTTP notification Check this item select the destination HTTP address and specify the parameters for HTTP notifications When the Tampering Alarm is triggered the HTTP notifications can be sent to the specified HTTP server For instance if the custom parameter is set as action 1 amp group 2 and the HTTP server name is http 192 168 0 1 admin php the notification will be sent to H
48. itialized start Tue May 22 11 12 01 2012 Network interface initialized end Network Tue May 22 11 12 01 2012 Host IP 192 168 0 131 Tue May 22 11 12 01 2012 Subnet Mask 255 255 255 0 deiert Tue May 22 11 12 01 2012 Gateway 192 168 0 1 ary Tue May 22 11 12 01 2012 MAC address 00 30 4F 83 83 90 Tue May 22 11 13 10 2012 admin ffff 192 168 0 153 GET HTTP 1 1 FTP Tue May 22 11 13 12 2012 admin Tf 192 168 0 153 GET cgi bin ret_c Tue May 22 11 13 12 2012 admin ffif 192 168 0 153 GET coi bin setlc HTTP Tue May 22 11 13 12 2012 admin tff 192 168 0 153 GET cgi bin top c F Tue May 22 11 13 12 2012 admin ffff 192 168 0 153 GET cgi bin cent Miolion hele cise Tue May 22 11 13 15 2012 admin ffff192 168 0 153 GET cgi bin shov ee Eege Tue May 22 11 13 18 2012 admin ffff 192 168 0 153 GET cgi bin serv Tue May 22 11 13 27 2012 admin ffff 192 168 0 153 GET cgi bin serv Tampering Tue May 22 11 13 36 2012 admin ffff 192 168 0 153 GET cgi bin storz Storage management Recording File location Wiewr information Log file User information A e Parameters Factory default Software version software upgrade Maintenance 43 142 View User Information The View User Information function can be found under this path System gt View User Information System User information Security admin admin Network DONS Mail FIP HTTP Motion detect
49. mpling pixel interval 1 100 Default value 10 e Detection level 1 100 Default value 10 Sensitivity level 1 100 Default value 80 Time interval sec 0 7200 Default value 10 Total four actions could be selected once the motion is detected Triggered Action Multi option The Administrator can specify alarm actions that will take when motion is detected All options are listed as follows e Enable Alarm Output Check the item and select the predefined type of alarm output to enable alarm relay output when motion is detected AN NOTE This option is excluded in the IP Camera e Send Alarm Message by FTP E Mail The Administrator can select whether to send an alarm message by FTP and or E Mail when motion is detected e Upload Image by FTP Select this item and the Administrator can assign a FIP site and configure various parameters as shown in the figure below When motion is detected event images will be uploaded to the appointed FTP site Upload Image by FTP FTP address Pre trigger buffer Post trigger buffer TT Continue image upload Upload for ho SEC Upload during the trigger active Image frequence fps e Upload Image by E Mail Select this item and the Administrator can assign an e mail address and configure various parameters as shown in the figure below When motion is detected event images will be sent to the appointed e mail address ye Upload Image by E Mail E Mail address
50. n to search all the devices Then select the IP Camera with the correct MAC address Double click on the IP Camera and the login window will come out E Planet Device Search rari Method Project Filter 1 dewice s found ALL FP Sen ree Device Search C HMm1 31 ICA HM131 Planet Fixed Dome E 32 168 0 175 H 255 255 255 0 Step 5 Enter User name and Password to access the IP Camera 14 3 4 Installing DC Viewer Software Online For the initial access to the IP Camera a client program DC Viewer will be automatically installed to your PC when connecting to the IP Camera If the Web browser doesn t allow DC Viewer installation please check the Internet security settings or ActiveX controls and plug ins settings see Appendix B Internet Security Settings to continue the process The Information Bar just below the URL bar may come out and ask for permission to install the ActiveX Control for displaying video in browser see the figure below Right click on the Information Bar and select Install ActiveX Control to allow the installation Planet IP Surveillance Management Interface Microsoft Internet Explorer File Edit View Favorites Tools Help ec J EN D A F Search J Favorites 7 Ch 3 Address E http 192 168 0 20 J This site might require the following Activex control install cab from Planet Technology Corporation Click here to install d Stream Information Bar
51. ome page CBR Mode Setting The CBR Constant Bit Rate mode could be the preferred bit rage mode if the bandwidth available is limited It is important to take account of image quality while choosing to use CBR mode Click Save to confirm the setting 4 4 3 Video ROI The Video ROI setting can be found under this path Streaming gt Video ROI Streaming Full HD IP CAMERA Video Format Video ROI Video Compression Video ROI setting Video ROI Enable stream 2 ROI setting ae Enable stream 3 ROI setting Video OCX Protocol Enable stream 4 ROI setting Video Frame Rate Video Mask Za Audio ROI stands for Region of Interest This function allows users to select specific monitoring region for 2 3 and 4 streams instead of showing the full image AN NOTE This function is only available when triple streams or above is selected under Video Resolution in Video Format Setting Video ROI Setting e Enable Stream 2 ROI Setting 64 Check the box and Stream 2 ROI Window will be displayed To change the size of Stream 2 ROI Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the mouse to the center of the frame can shift the frame to the intended location e Enable Stream 3 ROI Setting Check the box and Stream 3 ROI Window will be displayed To change the size of Stream 3 ROI Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the
52. outer automatically AN To enable this function please make sure that your router supports UPnP Note and it is activated e Friendly name Set the name for the IP Camera for identity 36 4 3 4 DDNS Dynamic Domain Name System DDNS allows a host name to be constantly synchronized with a dynamic IP address In other words it allows those using a dynamic IP address to be associated to a static domain name so others can connect to it by name System Full HD IP CAMERA DONS Security Dy namic DNS Use Cynarric ONS If You Want To Use Your DONS Account O Enbe DONS Network DONS Ma Provider Planetidns com K ME Host name planetestO planetddns com 1 16 Characters HTTP Motion detectin Username planettest 1 1 16 Characters Network Tailure detection Ee Password tati 1 16 Characters Lior rme marnacemeni Save Recording Ir mm fr File kajk ima mpipormgtabwon Factory default Kpftware versa COMA reo Upa Hie ARD MEAR Enable DDNS Check the item to enable DDNS Provider Select one DDNS host from the provider list Host name Enter the registered domain name in the field Example planetddnstest01 Username Enter the username required by the DDNS provider for authentication Example planetddnstest01 Password 37 Enter the password required by the DDNS provider for authentication Example planetddnstest01 AN If you want to use Planet DDNS please aply form the Planet
53. portant events or status changes e Enable Traps Check the box to activate trap reporting e Trap address Enter the IP address of the management server e Trap community Enter the community to use when sending a trap message to the management system Trap Option e Warm Start A Warm Start SNMP trap signifies that the SNMP device i e IP Camera performs software reload Click on lt Save gt button when complete 4 3 3 4 UPnP The UPnP setting can be found under this path System gt Network gt UPnP ee ANET fo E Full HD IP CAMERA System UPnP Security UPnP Setting Network Enable UPnP Basic LJ Enable UPnP port forwarding Qos Friendly name ICA HM131R SHMP Save UPnP DDNS Mail FTP HTTP Motion detection Network failure detection Tampering Storage management Recording File location View information Factory default Software version Software upgrade UPnP Setting e Enable UPnP When the UPnP is enabled whenever the IP Camera is presented to the LAN the icon of the connected IP Cameras will appear in My Network Places to allow for direct access NOTE To enable this function please make sure the UPnP component is installed on your computer Please refer to Install UPnP components for UPnP component installation procedure e Enable UPnP port forwarding When the UPnP port forwarding is enabled the IP Camera is allowed to open the web server port on the r
54. power the system and will damage the IP Camera permanently 2 You can also consult your local dealer for 802 3af POE PSE devices such as single port injector for single point installation Or for mass installation a Injector Hub for the network that already existed with Ethernet Switches or POE Switch all can be deployed 10 Chapter 3 Accessing Camera For initial access to the IP Camera users can search the camera through the installer program DeviceSearch exe which can be found in DeviceSearch folder in the supplied CD 3 1 Device Search Software Setup Step 1 Double click on the program Planet Device Search exe see the icon below its window will appear as shown below Then click the Device Search button e Planet Device G arch ewe E Planet Device Search Search Method Project Filter e Local Broadcast ALL C IP Relay 0 devicels found Step 2 The security alert window will pop up Click Run to continue Open File Security Warning The publisher could not be venfied Are you sure you want to run this software mn Hame Planet Device Search exe Publisher Unknown Publisher Type Application From 192 168 0 71 Face publisher ou should only run software from publishers you trust Y This fle does not have a valid digital signature that verifies its How canl decide what software to run DES 3 2 Device Search Step 3 Click Device Search
55. r to prevent the unit from data loss and system damage that caused by a sudden power fluctuation use of an Uninterruptible Power Supply UPS is highly recommended 2 1 System Requirements To perform the IP Camera via web browser please ensure your PC is in good network connection and meet system requirements as described below for appropriate setup and well view quality System Requirement 1 Intel Core 2 Duo 2 0 GHz or Intel Core 3 Processor 2 2 GB RAM or more Operating System Windows 7 or Windows XP Personal Computer Web Browser Microsoft Internet Explorer 6 0 or later Network Card 10Base T 10 Mbps or 100Base TX 100 Mbps operation Viewer ActiveX control plug in for Microsoft IE 2 2 Ethernet Connection Please follow the instructions below to connect this IP Camera s Ethernet cable 2 3 PoE Connection Connect the one end of the Ethernet cable to the network port on the camera and the other end to Power Sourcing Equipment PSE like 802 3af POE Hub Injector or 802 3af POE Switche Check the status of the link indicator and activity indicator LEDs if the LEDs are unlit please check the connections LL Green Link Light indicates good network connection i Orange Activity Light flashes for network activity indication 1 The RJ 45 interface only accept IEEE802 3af PSE Power Source AN Equipmetns Any non standard or passive POE is not allowed to Note
56. ransmission bit rate include 16 kbps G 726 24 kbps G 726 32 kbps G 726 40 kbps G 726 uLAW G 711 and ALAW G 711 Both uLAW and ALAW signify 64 kbps but in different compression formats Higher bit rate will let higher audio quality and require bigger bandwidth Click Save to confirm the setting 68 4 5 Camera Settings The figure below is the camera configuration page Details of each parameter setting are described as follows E PLANET rome system streaming DES White Balance Languages Ki EE Ll K CH al Y Video format H 264 1 H 264 2 MIPEG bitrate low compression high quality H 264 1 bitrate 4096 kbps middle compression H 264 2 bitrate 1024 kbps high compression low quality H 264 3 bitrate 1024 kbps high compression low quality NOTE Camera settings and buttons below the screen vary among different types of Camera 4 5 1 Exposure Setting The Exposure Setting can be found under this path Camera gt Exposure Exposure Auto Mode Auto Shutter Min Shutter Speed Manual Mode O Fixed Shutter 1 150 a 69 The exposure is the amount of light received by the image sensor and is determined by the width of lens diaphragm opening the amount of exposure by the sensor shutter speed and other exposure parameters With this item users can define how the Auto Exposure function works Each exposure mode is specified as follo
57. rs for your user identity Enable IEEE 802 1X Check the box to enable IEEE 802 1X Click on lt Save gt to save the IEEE 802 1X EAP TLS setting 4 3 3 Network Click lt Network gt in the left column and the page will display as shown below 4 3 3 1 Basic ges Ful HD IP CAMERA System Network i Welleledl F aT Get IP address automatically A paridad Use fixed IP address IP address 192 168 0 131 Cos subnet mask 295 295 255 0 SNMP Default gateway 192 168 0 1 UPnP Primary DNS 192 168 0 1 DDNS Secondary DNS 0 0 0 0 Mail O Use PPPoE Password Motion detection IP address Network failure detection Teen Advanced 1 jin i Web Server port 60 Storage management RTSP port 50d Recording MJPEG over HTTP port 6006 File location HTTPS port 443 View information save Factory default IPv6 Address Configuration Software version O Enable IPW Address Software upgrade Users can choose to use fixed IP address or dynamic DHCP IP address The following is descriptions for the two ways of setting IP address 30 Get IP address automatically DHCP The camera s default setting is Use fixed IP address Please refer to the previous section Chapter 3 Accessing Camera for logging in with the default IP address If select Get IP address automatically after the IP Camera restarts users can search it through the installer
58. ry Selectable video rotate types include Normal Flip Mirror 90 degree clockwise 180 degree rotate and 90 degree counterclockwise Differences among these types are illustrated as below Suppose the displayed image of the IP Camera is shown as the figure below To rotate the image users can select lt Flip gt for instance Then the displayed image will be reversed as shown below The following is descriptions for different video rotate type If select lt Flip gt the image will be rotated vertically e Mirror If select lt Mirror gt the image will be rotated horizontally 62 s e 90 Degree Counter clockwise Selecting lt 90 Degree Counter clockwise gt will make the image 90 counter clockwise inversed e 180 Degree Rotate Selecting lt 180 Degree gt will make the image 180 inversed Click on lt Save gt to confirm the setting GOV Settings Users can set the GOV length to determine the frame structure l frames and P frames in a video stream for saving bandwidth Longer GOV means decreasing the frequency of frames Click lt Save gt to confirm the GOV setting H 264 Profile Users can set each H 264 Profile to lt Baseline Profile gt lt Main Profile gt or lt High Profile gt according to its compression needs With the same bit rate the higher the compression ratio the better the image quality is The default setting is lt Main Profile gt NOTE Please make sure the higher
59. s Select lt Upload during the trigger active gt to record the triggered video until the trigger is off Wl Record stream to sd card Pre trigger buffer la Sec Upload for n SEC Upload during the trigger active AN Please make sure the local recording with Micro SD SDHC card is activated so that this function can be implemented Refer to Recording for further details Note e Upload Image by FTP Select this item and the Administrator can assign a FTP site and configure various parameters When tampering is detected event images will be uploaded to the appointed FTP site e Upload Image by E Mail Select this item and the Administrator can assign an e mail address and configure various parameters When tampering is detected event images will be sent to the appointed e mail address AN Make sure SMTP or FTP configuration has been completed Refer to Mail and FTP for further details Note 4 3 10 Tampering Alarm The Tampering setting can be found under this path System gt Tampering Tampering Alarm function helps the IP Camera against tampering such as deliberate redirection blocking paint spray and lens cover etc through video analysis and reaction to such events by sending out notifications or uploading snapshots to the specified destination s Detection of camera tampering is achieved by measuring the differences between the older frames of video which are stored in buffers and more recent frames
60. sccssseseseeeeeeeceeeseeeeeeeeeeesneeeeeeseeooeeeneeeeees 75 Appendix B Internet Security SettingS cccsceeessssssssseeeeeeeeeeceeenseeeseeeeeesneeeeeeseeooensneseeees 76 Appendix C DC Viewer Download ProCedulre cccccccesesseeeeeeesnseeeeeeesnseseooesseeeseoeeneeeesens 79 Appendix D Frequently Asked QuestiOns ccccccsssssseeeseeeesseeeseeeenseenenenseeeeeeennseeeseoensseessees 81 Chapter 1 Introduction Overview PLANET has announced a H 264 Full HD Fixed Dome IP camera ICA HM131 131R for meeting the feedback from worldwide market The ICA HM131 series support Full HD recording for high quality image Integrated the next generation video compression technology H 264 the ICA HM131 series can compress the video size to smaller one for users to transfer the Mega Pixel image on Internet easily The ICA HM131 series IP Cameras are innovatively designed for quick and easy installation in drop ceilings without concerning the outlet socket locations Power over Ethernet IEEE 802 3af supplies power to the cameras via the network eliminating the need for power cables and reducing installation costs Multi profile stands for video stream simultaneously The ICA HM131 series can deliver clear image with dual H 264 M JPEG stream video up to 1080p 1920 x 1080 pixels The IP Cameras use progressive scan providing full resolution images of moving objects without distortion in 30 frames per second perfe
61. software version page which is shown as the figure below System Software version Security Network DDNS Mail FTP HTTP pra The software version is pla20120518NSA Network failure detection Tampering Storage management Recording File location View information Factory default Software version Software upgrade Maintenance 56 4 3 17 Software Upgrade Software upgrade can be carried out in the Software Upgrade page as shown below PLANET Les FUN ND IP CAMERA System Upgrade Security Follow These Steps To Do The Software Upgrade Hetarork DONS stepi Mail Upload the binary file Step2 Application Select binary file you want to upgrade Pit er a userland img Network failure detection steps Click the upgrade button to start the upgrade process storage management Recording Upgrade File location View information Factory default Software versi n F Coftware upgrade Mairteranes g ai tenance AN NOTE Make sure the upgrade software file is available before carrying out software upgrade The procedure of software upgrade is like the following Step 1 Click Browse and select the binary file to be uploaded ex Userland jffs2 B i Systen Full ROW CAMERA Upgrade we Follow These Steps To Do The Software Upgrade Step Upload the binary fille WCA AHM013Vwrserdand rfsA e Step2 Select binary fe you want to upgrade usertland de z Stepz
62. t Internet security level to default or change ActiveX controls and plug ins settings Internet Security Level Default Step 1 Start the Internet Explorer IE Step 2 Select lt Tools gt from the main menu of the browser Then Click lt Internet Options gt Edit View Favorites hte Help ma Mail and News Back he 7 D Popp Blocker Manage Add ons LN beto Haat men eo 5 s 1 D EI http iaa nc SIE E windows Update windows Messenger E En E m 1 E e 3 d G ad General Securty Privacy Content Connections Programs Advanced Select a Web content zone to specify its security settings o Y Local intranet Trusted sites Restricted sites Internet 4 This zone contains all feb sites you haven t placed in other zones Security level for this zone Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level Default Level Step 4 Down the page press Default Level see the figure above and click OK to confirm the setting Close the browser window and open a new one later when accessing the IP Camera ActiveX Controls and Plug ins Settings Step 1 3 Refer to the previous section above SIG Step 4 Down the page press Custom Level see the figure below to change ActiveX controls and plug ins settings Internet Options General Security Privacy Content Connections Programs A
63. tection Motion Detection function allows detecting suspicious motion and triggering alarms when motion volume in the detected area reaches exceeds the determined sensitivity threshold value System Motion Detection Security Motion Detection off on Motion Detection Setting Network DDNS Sampling pixel interval 1 10 Mail Detection lewel 1 100 FTP Sensitivity level 1 100 HTTP f Time interval sec 0 7200 1 Motion detection ON Triggered Action e A Se k Network failure detection Record stream to sd card Motion Detection Winds fein na Tampering C Send alarm message by FTP C send alarm message by E mail d Upload image by FTF L Upload image by E Mail Storage management E Send HTTP notification Recording File Name ima Add date time suffix File location View information E O Add sequence number suffix no maximum value Factory default Add sequence number suffix up to lo and then start over Software version O Overwrite Sofware upgrade Maintenance In the Motion Detection setting page there is a frame Motion Detection Window displayed on the Live View Pane The Motion Detection Window is for defining the motion detection area To change the size of the Motion Detection Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the mouse to the center of the frame can shift the frame to the intended location
64. tion Unit Enter the name of the organizational unit to which the entity identified in Common Name belongs e Common Name Indicate the name of the person or other entity that the certificate identifies often used to identify the website e Valid days Enter the period in days 1 9999 to indicate the valid period of certificate Click on lt OK gt to save the Certificate Information after complete e 4 3 2 3 IP Filter The IP Filter setting can be found under this path System gt Security gt IP Filter E PLANET ges Ful HD IP CAMERA system IP Filter Security Pe Enable IF filter User Deny the following IP addresses HTTPS Filtered IP Addresses IP filter IEEE 302 4 Network DDNS Mail FTP HTTP ___ 0 0 0 0 Add Motion detection Network failure detection Tampering Storage management Recording File location View information Factory default Software version Software upgrade Using the IP filter access to the IP Camera can be restricted by denying allowing specific IP addresses e Enable IP Filter Check the box to enable the IP Filter function Once enabled the listed IP addresses IPv4 will be allowed denied access to the IP Camera Select lt Allow gt or lt Deny gt from the drop down list and click on the lt Apply gt button to determine the IP Filter behavior e Addi Delete IP Address Input the IP address and click on the lt Add gt button to add a ne
65. w and restart a new one later for accessing the IP Camera re Appendix C DC Viewer Download Procedure The procedure of DC Viewer software download is specified as follows Step 1 In the DC Viewer installation page click Next for starting installing Welcome to the InstallShield Wizard for DCViewer The InstallShield R Wizard will install OCViewer on your computer To continue click Mest WORKING This program is protected by copyright law and international treaties Installing DC iewer The program Features you selected are being installed Please wait while the InstallShield wizard installs DCviewer This may take several minutes Status InstallShield FO Step 3 Click Finish to close the DC Viewer installation page CG DC iaewer InstallShield Wizard E InstallShield Wizard Completed The InstallShield Wizard has successfully installed DC viewer Click Finish bo exit the wizard Cancel Then the IP Camera s Home page will display as follows e S27 Streaming Camera Logout Full HD IP GAMERA Languages 2012 05 21 16 25 D An i t QA o AMAN Video format H 264 1 O H 264 2 MIPEG bitrate low compression high quality H 264 1 bitrate 4096 kbps middle compression H 264 2 bitrate 1024 kbps high compression low quality H 264 3 bitrate 1024 kbps high compression low quality H 264 4
66. w filtered address The Filtered IP Addresses list box shows the currently configured IP addresses Up to 256 IP address entries may be specified To remove an IP address from the list please select the IP and then click the lt Delete gt button _ 28 4 3 2 4 IEEE 802 1X The IEEE 802 1X setting can be found under this path System gt Security gt IEEE 802 1X IEEE 802 1X EAP TLS CA certificate Upload CA certificate Client certificate Upload Client certificate Private key Upload Private key Settings Identity admin Private key password Cl Enable IEEE 802 1X Application Motion detection Metwork Ttalure detection Storage management Recording File location View information Factory default The IP Camera is allowed to access a network protected by 802 1X EAPOL Extensible Authentication Protocol over LAN Users need to contact with the network administrator for gaining certificates user IDs and passwords CA Certificate The CA certificate is created by the Certification Authority for the purpose of validating itself Upload the certificate for checking the server s identity Client Certificate Private Key Upload the Client Certificate and Private Key for authenticating the IP Camera itself Settings e Identity Enter the user identity associated with the certificate Up to 16 characters can be used ef e Private Key Password Enter the password maximum 16 characte
67. ws Auto Mode e Auto Shutter Mode This function is to control the shutter speed and adjust the iris automatically according to the light intensity It is also effective if a fixed iris lens is being used The minimum shutter speed range is configurable from 1 1 1 5 to 1 500 1 425 sec Manual Mode e Fixed Shutter Mode In this mode fixed shutter speed could be selected from the dropdown menu The shutter speed range is from 1 10000 to 1 1 1 5 sec with 19 18 options Users could select suitable shutter speed according to the environmental illumination 4 5 2 White Balance Setting The White Balance pull down menu is shown as follows White Balance Auto ATW Manual Rgain 0 127 Bgain 0 127 A camera needs to find reference color temperature which is a way of measuring the quality of a light source for calculating all the other colors The unit for measuring this ratio is in degree Kelvin K Users can select one of the White Balance Control modes according to the operating environment The following table shows the color temperature of some light sources for reference 70 Light Sources Color Temperature in K Cloudy Sky 6 000 to 8 000 Noon Sun and Clear Sky 6 500 Household Lighting 2 500 to 3 000 75 watt Bulb 2 820 Candle Flame 1 200 to 1 500 Auto Mode Auto White Balance The Auto White Balance mode is suitable for environment with light source having color temperature in th
68. y Y Detection Switch 1 Network 7 Off O On Detection Type DDNS l Fing the IF address 0 0 0 0 every 1 aa Mail Triggered Action FTP C Record stream to sd card HTTP E Send message by FTP Ll Send message by E Mail Motion detection Network failure detection Tampering Storage management Recording File location View information Factory default Software version Software upgrade Maintenance Being capable of implementing local recording through Micro SD card when network failure happens the IP Camera could be a backup recording device for the surveillance system Detection Switch You will be able to turn on off Network Failure Detection in System section Default setting is Off Detection Type Input the IP device address and the period of ping time to ping The ping time setting range is from 1 to 99 minutes Triggered Action Multi option The Administrator can specify alarm actions that will take when network failure is detected All options are listed as follows e Record stream to SD Card Select this item and the Tampering Alarm recording will be stored in Micro SD SDHC card when tampering is detected Pre trigger buffer recording function allows users to check what happened to cause the trigger The pre trigger buffer time range is from 1 to 3 seconds Select lt Upload for sec gt to set the recording 44 duration after alarm is triggered The setting range is from 1 to 99999 second

Download Pdf Manuals

Related Search

Related Contents

Manual de la Instalación  Husqvarna 322C Trimmer User Manual  JVC CA-D672TR User's Manual  ÉDITION PRINTEMPS • SPRING EDITION  Viewsonic Graphic Series EP2202R  Decespugliatori Elettrici ISTRUZIONI D`USO Electric edge  HV-XXX 850 SERIES OPERATION PARTS - hi  947-1700 EA-028945 LegacyUM.qxd  NESTED TRANSACTIONS FOR CONCURRENT EXECUTION OF  Manual - Marshall Electronics  

Copyright © All rights reserved. Failed to retrieve file