FOCUS SOLO ZOOM FC User manual rel 1.0 Eng
Contents
1. 2 FOCUS SOLO ZOOM FC Le informazioni contenute in questo documento sono state attentamente redatte e controllate Tuttavia non e assunta alcuna responsabilita per eventuali inesattezze Tutti i diritti sono riservati e questo documento non puo essere copiato fotocopiato riprodotto per intero o in parte senza previo consenso scritto della D T S DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche funzionali o di design a ciascun proprio prodotto D T S non assume alcuna responsabilita sull uso o sull applicazione dei prodotti o dei circuiti descritti The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein Les informations contenues dans le pr sent manuel ont t r dig es et contr l es avec le plus grand soin Nous d clinons toutefois toute responsabilit en cas d ventuelles inexactitudes Tous droits r serv s Ce document ne peut tre copi photocopi ou reproduit dans sa totalit ou partiellement sans le consentement pr2. alable de D T S D T S se r serve le droit d apporter toutes modifications et am liorations esth tiques fonctionnelles ou de design sans pr avis a chacun de ses produits D T S d cline toute responsabilit sur l utilisation ou sur l application des produits ou des circuits d crits Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y controladas Con todo no se asume ninguna responsabilidad por eventuales inexactitudes Todos los derechos han sido reservados y este documento no puede ser copiado fotocopiado o reproducido total o parcialmente sin previa autorizaci nescrita de D T S D T S se reserva el derecho a aportar sin previo aviso cambios y modificaciones de car cter est tico funcional o de diseno a cada producto suyo D T S no se asume responsabilidad de ningun tipo sobre la utilizaci n o sobre la aplicaci n de los productos o de los circuitos descritos 3 FOCUS SOLO ZOOM FC TECHNICAL FEATURES D T S Product codes 03 LCBOO9E20FC99 FOCUS SOLO ZOOM FC grey glitter finishing 03 LCBOO9ES80FC99 FOCUS SOLO ZOOM FC gold finishing LED technology 1 x FULL RGBW LED Total lumens output 429 Im LEDs average lifespan 75 000 hours 70 lumen output Optical group 3 5 52 linear manual zoom Control system DMX 512 RDM control DMX 4 DMX Channels Protection IP20 protection level against the penetration of solids and liquids Construction FOCUS SOLO ZOOM FC is made on alumini
3. written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein MADE IN ITALY C The Lighting Company ISO 9001 2008 D T S quality system is certified to the ISO 9001 2008 standard D T S products are designed and manufactured at the D T S plants in italy 05171241 D T S Illuminazione s r l Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN Italy Tel 39 0541 611131 Fax 39 0541 611111 info dts lighting it www dts lighting it
4. ROUND RJ45 MALE DMX 5 POLES FEMALE CABLE CONNECTOR PINOUT INCLUDED IN THE BOX RJ45 MALE DMX 5 POLES FEMALE DMX DATA PIN 3 DMX DATA PIN 2 NC CON OAR WDNDN gt gt DMX GROUND PIN 9 FOCUS SOLO ZOOM FC DMX PROTOCOL FOCUS SOLO ZOOM FC 4 CHANNELS MODE 1 RED 2 GREEN 3 BLUE 4 WHITE DMX range DMX range 10 FOCUS SOLO ZOOM FC EXTERNAL POWER SUPPLY AND DMX CONNECTION DIAGRAMS EXTERNAL POWER SUPPLY Qm STANDARD CONTROLLER DMX 512 8 5 lt s ie O G D gt ol2 co 2 Zu xe x 1 as Is x ia lal 2I ei il B o fc O x 2 ols SS 35 0 mo mim Brown 12 48Vdc IN Blue DMX IN data White DMX IN data Black 12 48Vdc Ground DMX Ground NOTE FOCUS SOLO ZOOM FC do have 3 different operating mode selectable by user via DLC 901 under AUTO menu when not connected to DMX line Option 1 RGBW channels at 0 OFF if no DMX availalbe Option 2 RGBW channel at 60 intensity if no DMX available Default Option 3 RGBW channel at 100 intensity if no DMX available The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior
5. ication between REMOTE CONTROL and units DLC901 DMX remote control setting procedure for FOCUS SOLO units 1 Connect the DLC901 to the DMX line 2 Be shure that all the FOCUS SOLO ZOOM FC units are turned ON 3 Turn ON the DLC901 4 Select DeviceList menu and press ENTER 5 On DLC901 are shown the connected FOCUS SOLO ZOOM FC units the one selected will be turned ON while all the others will remain OFF 6 With UP and DOWN buttons select Address menu and press ENTER 7 Now it will be possible to assign the desired DMX address to the selected FOCUS SOLO ZOOM FC unit by using UP DOWN ENTER BACK buttons 8 Repeat Steps 4 7 for all FOCUS SOLO ZOOM FC units connected on the DMX line Please refer to the dedicated DLC901 User s manual for Setting details NOTE FOCUS SOLO ZOOM FC do have 3 different operating mode selectable by user via DLC 901 under AUTO menu when not connected to DMX line Option 1 RGBW channels at 0 OFF if no DMX availalbe Option 2 RGBW channel at 60 intensity if no DMX available Default Option 3 RGBW channel at 100 intensity if no DMX available 8 FOCUS SOLO ZOOM FC FOCUS SOLO ZOOM FC REMOTE CONTROL DLC901 DLC901 Remote control D T S Code 03 LA 063 1 DMX IN DMX OUT USB RJ45 CONNECTOR POWER ON DISPLAY UP DOWN LEFT RIGHT BUTTONS BACK ENTER MMC CARD SLOT DMX IN OUT RJ45 CONNECTOR PINOUT 1 DMX DATA 2 DMX DATA 3 4 5 6 NC 7 8 DMX G
6. m multipolar cable 1 m length for 12 48Vdc IN and DMX IN Brown 12 48Vdc IN Black 12 48Vdc Ground and DMX Ground Blue DMX IN data White DMX IN data Brown 12 48Vdc IN Blue DMX IN data N 1m cable IA White DMX IN data Black 12 48Vdc Ground DMX Ground FOCUS SOLO ZOOM FC MANUAL ZOOM ADJUSTMENT FOCUS SOLO ZOOM FC has 3 5 52 range linear manual zoom m Knob for Zoom adjustment FLOOD MODE max 52 SPOT MODE min 3 5 6 FOCUS SOLO ZOOM FC DMX SIGNAL CONNECTION FOCUS SOLO ZOOM FC operates using the digital DMX 512 signal Connection between the mixer and the projector or between projectors must be carried out using a two pair screened 0 5 mm cable Ensure that the conductors do not touch each other Connect the mixer signal to the DMX IN projector cables and connect it to the next projector by connecting the DMX IN projector cables of the second one This way all the projectors are cascade connected a A A A STANDARD CONTROLLER DMX 512 Dar i GND Black DMX GND MINDANAO E White DMX IN data ar oK2 3 DATA Dessen 2 Blue DMX IN data For installations where long distance DMX cable connections are needed we suggest to use a DMX terminator The DMX terminator is a 120 ohm 1 4 W resistor placed between DMX signal and DMX signal cables The DMX terminator must be applied on the last u
7. nit of the DMX line PLACE A 120 OHM 1 4 W RESISTOR BETWEEN DMX SIGNAL AND DMX SIGNAL CABLES ON E THE LAST UNIT CONNECTED TO THE DMX LINE lt 2 T Blue DMX IN data White DMX IN data 120 OHM 1 4 W RESISTOR By using the remote control DLC901 D T S Code 03 LA 063 1 it will be possible to set the DMX address and visualize different datas on FOCUS SOLO ZOOM FC projectors Please note that no DMX splitters must be connected between DLC901 REMOTE CONTROL and FOCUS SOLO ZOOM FC projectors on the DMX line because this will stop the bidirectional communication between REMOTE CONTROL and FOCUS SOLO ZOOM FC units 7 FOCUS SOLO ZOOM FC DMX ADDRESS FOCUS SOLO ZOOM FC operates at 4 DMX channels MODE DMX channel 1 RED DMX channel 2 GREEN DMX channel 3 BLUE DMX channel 4 WHITE If you want to control different FOCUS SOLO ZOOM FC units on the same DMX line separetly set the following addresses on the mixer Projector 1 AO001 Projector 2 A005 Projector 3 A009 Projector 4 A013 Projector 5 A017 ae projector 7 AQ25 Selelcting the DMX address By using the remote control DLC901 D T S Code 03 LA 063 1 it will be possible to set the DMX address and visualize different datas on FOCUS SOLO ZOOM FC projectors Please note that no DMX splitters must be connected between DLC901 REMOTE CONTROL and FOCUS SOLO ZOOM FC projectors on the DMX line because this will stop the bidirectional commun
8. um and stainless steel Power supply External 12 48Vdc range PSU 10W min power each unit connected Electronic full range 90 260Vac 50 60 Hz Connection 4 poles cable 1 m length for 12 48Vdc IN and DMX IN Operating ambient temperature 10 40 Weight 0 94 Kg International certifications Cerfication CE LED Class Class 2 LED product MAIN ELECTRICAL CHARACTERISTICS Input Voltage Range Vin 12 48Vdc Power Consumption 10W Output Power Output Range 4 channels output 2W per channel Output Current 670 mA 100 per channel Control Input Control Signal DMX 512 Dimming System Constant Current PWM Address Range DMX 512 channels addressable by remote control DLC901 4 FOCUS SOLO ZOOM FC UNIT DIMENSIONS IMPORTANT SAFETY INFORMATION Fire prevention It is permissible to place the unit on normally flammable surfaces Suitable for mounting on normally flammable materials surfaces greater than 200 C with some combustion time lag Prevention from electric shock The use of a thermal magnetic circuit breaker is recommended for each external 12 48Vdc range PSU connected to the FOCUS SOLO ZOOM FC unit Safety The external surface of the unit may exeed 50 C never handle the unit until at least 5 minutes have elapsed since the unit was turned off The ambient temperature should not exceed 40 C and should not be lower than 10 C 5 FOCUS SOLO ZOOM FC INPUT CONNECTIONS 4 x 0 25 sq m
Download Pdf Manuals
Related Search