Integra manual
Contents
1. PAL H 264 Baseline Compression BNC 8 Input 1 Output G 726 8Kx16bit ADPCM Mono RCA 8 Input 1 Output Motion detection Sensor Input Relay Output Video Loss 4CH Input 1CH Output Each Channel PAL 25 FPS NTSC 30 FPS 15 Color LCD 1024x768 4 3 450 1 150nit CCFL 25fps CIF 12 5fps halfD1 6 25fps D1 2OOFPS CIF 1 OOFPS halfD1 50FPS D1 Power on Auto Record Scheduled Record Manual Record Motion Detection Sensor Trigger Support Privacy Mask SATA Interface support 1000GB TCP IP DHCP DNNS PPPoE E Mail IE Browser Live Monitor Configuration Download Video Mobile Phone Surveillance Mouse Portable Mobile HDD Flash Drive DVD Burner Firmware Upgrade Normal Play Fast Forward Rewind Single Step RJ45 10M 100M Ethernet Auto Detect PELCO P PELCO D AVI DC 12V Adapter 10 15W O 40 10 90 RH 360 x 360 x 160mm WHD inc stand base LIMITATION OF LIABILITY This users manual is supplied as is with no warranties be it expressed or implied including but not limited to the implied warranties of merchantability suitability for any exact purpose or non infringement of any third party s rights This publication may include technical inaccuracies or typos The manufacturer holds the right to introduce any changes to the information contained herein for any purpose including but not limited to improvements of the publications and or related to the product at any time without p2. To format the HDD enter the main menu system settings HDD Format HDD The format process can take several minutes Switch on your DVR and wait for the system program to load If you have not yet formatted the installed hard disk drive or the integra didn t read the HDD or there is no space of the HDD to record it will display an icon f in the video preview interface You must format the HDD in the DVR before first use Please see above THE MAIN SCREEN The standard layout is four or nine windows depending on the model evenly distributed over the screen From the main screen you can access menu options and switch among channel views displaying either all channel feeds simultaneously or a full screen view of a selected channel No signal Integra 4 integra 8 DISPLAYING A SINGLE CHANNEL In the multiple screen view you can make a particular window active by left clicking on it once with a mouse or navigating to it using directional buttons If an audio output device Is connected to this channel you can monitor both audio and video feeds In order to return to the multi screen view you could either double click on the screen again or press the single multiple view button either on the remote control or the front panel STATUS BAR To display the Status Bar single right click on the screen The status bar displays useful information such as time and date settings plus available hard disk space 08 04 2010 1
3. click REFRESH at the calendar interface to display the recording information of current month June 2010 The highlighted date indicates that video was recorded on that day Click on a date to search the recording file list of that day For example the above fig shows that June 12th 13th have recorded video when it shows on bold and current search date is June 1 2th Select channel and type at the bottom of the calendar Click SEARCH and the result will display as follows FILE LISI ALL CHANNM aLLTvPe Double click one of the listed recorded video to playback Or select one of the listed recorded video and click the button PLAY to playback The file icon will change to G DOWNLOAD The user can download files on PC and Save them to HDD for backup or play Download file format is AVI file 12 00 00 12 47 54 12 00 00 1 2 47 54 12 00 00 12 47 54 12 47 55 13 10 01 12 47 55 13 10 01 12 47 55 13 10 01 13 10 01 13 47 55 13 10 01 13 47 55 13 10 01 13 47 55 13 47 55 1 4 29 23 i u M WA w AD J 13 47 55 14 29 24 14 29 23 1 4 47 55 14 29 24 1 4 47 55 14 29 24 1 4 47 55 14 47 55 15 16 08 iSBSBaSD INSTRUCTION OF TOOLBAR Play Stop Fast Volume Control Pause Slow Single Play Play REMOTE SETTING Click Remote Setting to enter into setup interface this interface includes record alarm PTZ network advanced and system information six menus Encode Sett
4. or transmitted in any form or by any means electronic mechanical recording photocopying or otherwise without the prior written permission of the owner Contents Safety INSHUCUONS oxasa as 261 Siete dec esuntaseethawvaenerdwnedewnnden 4 COMO Me ee ee ee ee ee 5 Getting Started and the Main Screen cece ccc tet eee tenet enees 9 RECOIGING cieucsyenapnseaeiuins adaa pean eena needs aa aeaee ca ranen eens 12 PINDA CK orererinpe d ir a a E AS E cae eta oe A aT A 13 Video BACKUP s5ec0e5u00ed an den aan aeauan ceensuaeeuaaiewaeeceereeees aes 14 REMOlCe VICWING oreren EREE arson E AEE ewe 16 Web Browser Operation jinasices a eessiredaevs asad onrarenest sav easurees 18 Mobile Phone SUDDOIE c5sac0sowst yeas aches cbyansay senna veneers ooh pate 27 Technical Specification 1 ccc ccc cee recente eet rneer 28 Limitation of Liability js tanaveniovakaseascanieaenseae canned eraiencuede ne 30 What Is included EAS esp o Integra c w installed Installation manual Remote Control Installation CD hard drive This quick start manual is intended as a guide to accessing the main features and functionality of the integra The intuitive menus offer further information and an explanation of the full capability of the system is included on the enclosed CD Please get acquainted with the parts and accessories as well as the ways to use the appliance as described in this instruction manuals If you have any questions that cannot be
5. answered by either the quick start or full user guide please contact your distributor or ESP directly Technical support 44 0 1527 515150 Getting Started Check List Before starting to work with your integra please make sure all relevant connections are carried out correctly e Are the power and video in out cables connected e Have you formatted the Hard Drive e Are all cameras connected and powered SAFETY INSTRUCTIONS Read these instructions and keep them in a Safe place for future reference Please refer all work related to the installation of this product to qualified service personnel or system installers Do not operate the appliance beyond its specified temperature humidity or power source ratings Place the unit on a flat surface not prone to vibration or impact Use the appliance at temperatures between OoC 450C 320F 1130F and humidity below 85 The input power source for this appliance is between 90 264 VAC 47 63 Hz Install the unit away from heat sources such as radiators heat registers and stoves Installation of the unit near consumer electronics devices Such as stereo receiver amplifiers and televisions is permitted as long as the air Surrounding the terminal does not exceed the above mentioned temperature range Handle hard disk drives with care It is possible to damage hard drives if they are moved while their motors are still running To allow the hard drive to spin down and park its he
6. are five channel options CH1 CH2 CH3 CH4 and ALL Press Enter and you can change the channel to be displayed on file listing Recordings for the relevant month will be shown in the calendar block Recording status for each day will be displayed Green normal recording Red alarm recording and Grey no recording Click any date to search the recording status of that day Select any period within the day to begin playback Playback by file list Input the approximate searching date and click search to view the recording status Choose an entry within the file listing to play back Playback by log Select log search from the record search menu Lod SEARCH i contort Select a log type and start and end time then RIRAL select the search icon to display the log of SRU S 0002 2010 recorded files Use the up and down arrows to search through the log Push Search button after the setting of log time and type and the system will display the required log in the list Click and ESM to switch page and click wo to Save the log list to USB disk PLAYBACK CONTROL In the playback mode you can see the playback control panel as well as the date and time of the played file Ka Fast rewind the available speeds are 2x 4x 8x 16x 32x and 64x H Slow forward the available speeds are 1 2x 1 4x and 1 8x B Je Pause Frame by frame view gt gt Fast forward the available speeds are 2x 4x 8x 16x 32x and 64x
7. feature Windows CE Mobile Symbian S60 3rd Edition OS Apple IPhone Andriod and Blackberry APPLE IPHONE 3GS AND 4 AND ANDROID Note remote viewing software and installation instructions for remote viewing via Blackberry phones can be found on the enclosed CD Mobile viewing on a suitable 3G phone is simple via a bespoke viewing APP developed for integra Download the Mobileye APP from the relevant APP store directly to your phone Launch the APP on your phone then select settings bottom right hand corner Server IP 125 8962187 Ba oe Server IP enter IP address of the integra UserID usr Note If the IP adress entered into the integra network _ settings is a 0xx 0xx 0xx xxx format do not enter the zeros Port enter the mobile port of the integra Default 10510 User name enter your integra user name Password enter your integra password Note passwords are case sensitive Click back to enter control screen Click bottom left play to connect to integra In control screen you can select cameras to view Operate PTZ and store snapshots Technical specification INTEGRA 4 Video Format Video Format Video Input Audio Format Audio Input Alarm Type Sensor In Out Display Frame Rate LCD Monitor Playback Resolution CH1 Record Frame Rate Record method HDD Interface Network Protocol Network Function USB 2 0 Interface Playback Method Network Interface PT
8. 5 255 255 0 and the gateway is 192 168 0 1 Local Area Connection Status Conneched Oa 11 100 0 Mbps Local Area Connection Properties Genel Authentication Advanced Corewect uarg B Realtek ATLETA S10 Faray Fact E Configue T hus gnmechon uses iha hollowang terns 4 See x frie and Panter Shanng for Microsol Networks w oes Packet Schager v Y Intemet Protoced TOR AP iptal rare all Properties i JSE a Ales p u coinpubsi bo denon PepOUnCE On a Macionolt asiaan L Show mon in notiication ares when connected e Hotii me when this connection hac innbed of no conmectraty OK Cancel Internet Protocol TEPIP Properties General You can gel IP sethngs acsigned aulcenetcay ff pour meivak puppa the capably Othenete pou need bo atk pour melvenk sclvenesieator few the appeopnate IP petting O Dbten an IP adder autcmatecally ey Uge the fodiowang IP addes IP addiert 192 168 O 123 Steel matk 25 25 25 0 Deli galga 12 168 0 1 Usg the following ONS server addresses Prefered DHS temer Abemate DNS perver Cancel CONTROL DOWNLOAD AND INSTALLATION After finishing the aforementioned settings open the IE browser input http the setting IP address of the integra and confirm If the http port of DVR setting has been changed not 80 you must add a colon and port number If your browser does not support the ActiveX to download please click here the network will download a
9. 8 58 07 Wed FEM 274HR System time Approximate Remaining Hours of HDD recording Right click again to move on to the main menu bar or right click twice to return to main live view LOGIN SCREEN WHEN PASSWORD ACCESS IS ENABLED In live view press the button EQ fR twice or double click twice the right mouse key The login window will appear if password access Is enabled Select user name and user password via numeric key board to access the main menu LOGIN The default password for the main DEVICE 1D administration user is Admin and the USER NANE 7 password is 888888 For system security r you can change the password of admin and PASSWURU add other usernames with passwords that can have allocated restricted user rights NB Passwords are case sensitive MAIN MENU INTEGRA 8 SHOWN IN EXAMPLE Ea D oO o o a oa gt PLAY MUTE ON PTZ EZOOM MUTE OFF SYSTEM MANUAL KEYLOCK SEQ ADVANCE SETTINGS REC STOP MANUAL REC System configuration Search playback and backup of recorded files MANUAL REC STOP MANUAL REC Click the MANUAL REC button to start manual recording Click STOP MANUAL REC menu or press n button to stop manual recording KEYLOCK If the password is enabled click KEYLCK to logout the system AUTO SEQUENCE Click to enable auto sequencing the channels with images will be displayed in sequence Channels without images or with sequence display disabled wo
10. EA Ezoom Right click to enter zoom mode In zoom mode left click and drag to create a zoom area Right click to exit g 52 volume adjustment Video Backup Storing captured recoding on a USB stick is done through the playback menu a Inserta USB stick into the USB port on the right hand side of integra b Search for files to be recorded c Select the files for backup from the file listing box on the right hand side of the record search screen by selecting the tick box next to each required file d Select the back up icon ji located at the far right hand side of the menu bar below the file listings to start back up Integra only supports the FAT32 file system for USB flash drives and HDDs PLAYING BACKED UP VIDEO ON A PC To play back stored recorded files from a USB stick to a PC you will need to firstly install the HSplayer program from the enclosed CD Place the CD in your PCs CD drive Within the drive ae locate the folder marked Player Within the folder locate the file marked HSplayer gt Copy send or drag this application to your selected folder or desktop Double click the HSplayer icon in your selected location to open the player screen Maximize the window Minimize Close the the Window Window HsPlayer 00 00 00 42685 Open Capture Play Mute Setting Next frame Volume slide Click ry to open a file to play from your USB stick You can capture and Store still images from the file bei
11. Enable a Prompt y Download unsigned ActiveX controls CONNECTION SETTING The remote access for integra should be carried out through the network In the local area network connection the IP address of the client computer must be in the same network section with that of the integra When using a wide area network connection ensure that both client and host can visit the public network and connect through the IP address or the dynamic domain name The following will mainly focus on the connecting and setting method for a local area network Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Right click on Network neighborhood and click Attribute to open the Network connection Double click to open Local connection Click Attribute Double click Internet protocol TCP IP Examine the IP address subnet mask and default gateway on the PC Set the corresponding IP address subnet mask and default gateway on the DVR refer to 5 5 5 Network Setup If the subnet mask and default gateway on DVR are the same with those of the PC then the IP address must be in the same network section but cannot be the same with the used one Otherwise it will cause IP address conflicts Take the figure above as an example the IP address should be 192 168 0 X wherein X cannot be 40 or 1 including other IP addresses currently being used and cannot Surpass 255 the subnet mask is 25
12. INTEGRA CCTV Monitor with integrated DVR USER MANUAL FOR INTEGRA 4 INTEGRA 8 CAUTION RISK OF ELECTRIC SHOCK PLease DO NOT REMOVE COVER WHEN POWER CONNECTED NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications FCC Caution To assure continued compliance use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This Class A digital apparatus meets all the requirements of the FCC Regulations Copyright Statement All rights reserved No part of this publication may be reproduced in any form or by any means transcribed translated into any language or computer language transformed in any other way Stored in a retrieval system
13. NET MASK input the subnet mask of the integra connection GATEWAY input the gateway number of the integra connection PPPOE SETUP Select PPPOE from type menu Media port Enter media port Default 9000 WeB port Enter HTTP port Default 80 PPPOE User Enter user name supplied by ISP supplier PPPOE password Enter PPPOE password supplied by ISP supplier DDNS SETUP From the main network menu select DDNS Select DDNS on Select the DDNS server from three options 3322 DYNDNS Perfecteyes HOST NAME Input the name of the host server USER NAME Input the name of the user PASSWORD Input the password EMAIL SETUP Images created by alarm events can be sent via e mail directly from integra To send e mail settings must be configured within e mail in the main network menu and e mail must be selected as an action following an alarm event with the alarm setup SSL SSL is a Security link transport protocol You can encrypt your communication info using SSL to prevent hackers from monitoring your email and communication data This function is not available when using Gmail as a mail Server Interval This indicates the interval for sending email including 5s 3m SMTP Port enter the sender port of the SMTP server Generally the SMTP port value is 25 but there are exceptions for example the SMTP port of the G mail server should be 465 SMTP enter the server IP address Sender enter the sender s email address The email address s
14. Z Protocol Video Backup Power Adapter Power Consumption Operating Temperature Operating Humidity Dimensions PAL H 264 Baseline Compression BNC 4 Input 1 Output G 726 8Kx16bit ADPCM Mono RCA 4 Input 1 Output Motion detection Sensor Input Relay Output Video Loss 4CH Input 1CH Output Each Channel PAL 25 FPS NTSC 30 FPS 15 Color LCD 1024x768 4 3 450 1 150nit CCFL 25fps CIF 25fps halfD1 12fps D1 1 OOFPS CIF100FPS halfD150FPS D1 Power on Auto Record Scheduled Record Manual Record Motion Detection Sensor Trigger Support Privacy Mask SATA Interface support 1000GB TCP IP DHCP DNNS PPPoE E Mail IE Browser Live Monitor Configuration Download Video Mobile Phone Surveillance Mouse Portable Mobile HDD Flash Drive DVD Burner Firmware Upgrade Normal Play Fast Forward Rewind Single Step RJ45 10M 100M Ethernet Auto Detect PELCO P PELCO D AVI DC 12V Adapter 10 15W O 40 10 90 RH 360 x 360 x 160mm WHD inc stand base Technical specification INTEGRA 8 Video Format Video Format Video Input Audio Format Audio Input Alarm Type Sensor In Out Display Frame Rate LCD Monitor Playback Resolution CH1 Record Frame Rate Record method HDD Interface Network Protocol Network Function USB 2 0 Interface Playback Method Network Interface PTZ Protocol Video Backup Power Adapter Power Consumption Operating Temperature Operating Humidity Dimensions
15. ads wait at least 10 seconds after disconnecting power before moving the unit To avoid shock and vibration damage to the internal hard drive do not move the unit while it is plugged in Do not place the unit in an enclosed area where the cooling vents are blocked or impede the flow of air through the ventilation openings Protect the power cord from being stepped on or pinched particularly at plugs and the points where they exit from the apparatus Do not drop metallic parts through slots This could permanently damage the appliance Turn the power off immediately and contact qualified service personnel for service Handle the appliance with care Do not drop or shake as this may damage the device Do not expose the appliance to water or moisture nor try to operate it in wet areas Do not install the unit in an area where condensation occurs Do not operate with wet hands Take immediate action if the appliance becomes wet Turn the power off and refer servicing to qualified service personnel Moisture may damage the appliance and also cause electric shock Do not use strong or abrasive detergents when cleaning the appliance body When the dirt is hard to remove use a mild detergent and wipe gently Do not overload outlets and extension cords as this may result in a risk of fire or electric Shock Please make a note of your settings and save them This will help when you are required to change the system configuration or when an unexpected fa
16. ck 11 REC Start or Stop manual recording REMOTE CONTROL In device operation the enter key on the remote control or the front panel has the same function as a mouse left click The IR Range of the remote control is up to 10 meters The buttons on the remote control correspond 1 1 with the buttons on the front panel 1 REC Start or Stop manual recording 2 Numerical Button Use to select channel for live full screen display 3 Quad Switch to quad mode 4 Menu MENU ESC Displays exits the main menu 5 Lock If the password is enabled press to logout of the system 6 Mute ON Mute Off Turn on or turn off sound 7 Spot View Press to enable auto sequencing 8 9 10 11 Move selected item in menu 12 ENTER This button is used as the enter key in most functions or to access PTZ mode on live view 13 Play Pause Opens video search and playback menu When the playback mode is activated press this button to play pause playback 14 Stop Stop playback 15 Rewind Rewind video during playback 16 Fast Forward Fast forward video during playback BACK PANEL 1 2 Video Input output Connectors 4 channel video input BNC 1Vp p 75Q plus single video output for integra 4 8 channel video input BNC 1Vp p 75Q plus single video output for integra 8 All inputs outputs via supplied multi channel converter 3 Audio Input Output Connectors 4 channel audio input 1 channel output RCA 2Vp p 600Q for int
17. edule then left click on the arrows below to display the record schedule set up screen The record schedule can be set up by channel day and time and either normal or alarm motion recording Motion recording Within system settings in the main menu select alarm then select motion Each channel can be configured separately for motion on sensitivity motion detection area and activity upon trigger Remember to select the tick save parameter after configuring all channels or settings will be lost Recording status display The top right corner of each channel image features the following status icons 4 px Icon indicates that the channel has detected motion in the motion detection mode a Icon indicates that the channel has detected sensor alarm in the alarm mode Red dot indicates that the channel is running in the mode of recording Playback To play back recordings select play from the main menu or press the play button on the front panel or remote control to access the record search playback screen There are various methods of searching for recordings moon 07 2010 Playback by specific date Input the time and date of the desired viewing period checking date and time and click the play icon It is possible to select all channel or single channel playback Playback by calendar Input the desired approximate search date and click the search icon to see the recording Status on this date There
18. egra 4 8 channel audio input 1 channel output RCA 2Vp p 600Q for integra 8 4 Alarm Input output ALARM IN 1 4 5 6 Ground For connection to external sensor devices ALARM OUT 7 8 For connecting to external alarm devices PTZ 9 12 RS 422 RS 485 Connector For connecting PTZ camera control 5 Ethernet Connector RJ 45 10 100 Base T Ethernet network 6 USB ports Connection for mouse Rear and backup stick side 7 Power Input Socket 12V DC 8 Power Switch INTEGRA MENU TREE Language Add User Video System Change Password Time Delete User User Local Permission System HDD Remote Permission Volume Record Channel Maintenance Record Information Record Bitrate Record Record Resolution Video Channel Record Framerate Name Record Audio Position Record Packtime Live Record Mode Video Video Audio Video Colour VGA Resolution System Settings Record Time Roll Time Video Margin Area Covered Play Video Setup Network Manual REC Network DDNS STOP Manual Channel Email REL I O Alarm Mobile MUTE ON HDD Loss Channel MUTE OFF Alarm HDD Full Protocol TOOL BAR Video Loss Baud Rat Keylock Alarm Action Data Bit Motion Detect Stop Bit PTZ PTZ Parity Auto Sequence SAER lee EZOOM AR VO Switch Advance Quad 6 Show 8 Show 9 Show Getting Started and the Main Screen IMPORTANT FORMATTING HARD DISK DRIVE Before you can record onto your HDD it should be formatted by integra as standard PC formatting is not compatible
19. hould be associated with the SMTP server used Receiver enter the intended receiver s email address MOBILE PHONE REMOTE MONITORING Mobile remote viewing directly from integra can be set up with many 3G enabled mobile phones To enjoy this function the integra must be first connected and setup correctly with the internet Please see network set up options above Move the cursor to MOBLE SETUP the icon will be highlighted when selected and press Enter to enter into the setting interface SERVER PORT Enter a server port number between 1024 and 65535 default setting is 10510 NETWORK TYPE Enter the mobile network capability Note You can only see one channel at one time when viewing from a mobile phone The speed of the display depends on the speed of the internet connection Web Browser Operation FEATURE Install the software through the IE browser of OS to operate the network remotely and conveniently DVR supports C S B S and access in LAN and WAN It also supports IP and domain name visiting RESTRICTION CONDITION To ensure a Stable connection we recommend Windows XP or Windows Vista operation system and IE 6 0 or IE 7 0 browsers NETWORK SECURITY SETTING Prior to control installation please program the network security level by using the following operations 1 Open the IE browser and click Tools Internet Options 2 Choose the Security label in the dialogue box 3 Click Custom
20. ilure or trouble occurs Caring for the environment by recycling When you see this symbol on a product do not dispose of the product with residential or commercial waste Recycling your Electrical Equipment O Please do not dispose of this product with your residential or commercial waste Some countries or regions such as the European Union have set up systems to Ln collect and recycle electrical and electronic waste items Contact your local authorities for information about practices established for your region Controls MENU ENTER POWER LEFT RIGHT AUTO ESC LCD MONITOR CONTROLS POWER Independent power switch for the monitor Press the button for over 3 seconds to turn off DVR power not effected FRONT PANEL 1 5 Select video channels to display on live monitor between individual channels or quad display 14 15 16 17 18 Use arrow buttons to move among the menu items Press Enter 4 to confirm your choice On live view the a4 button is used as PTZ control key 12 13 Power LED Blue HDD LED Red Confirms connection to the power supply and the HDD 6 Menu A Access tool bar Hide tool bar Exit menu Exit sub menu 7 Rewind Rewind video during playback 8 Play Pause P Il Opens video search and playback menu When the playback mode is activated press this button to play pause playback 9 Stop W Stop playback 10 Fast Forward Fast forward video during playba
21. ing zn Click Encode Setting Video Para to enter into setup interface User can adjust recording parameters resolution quality and frame rate for each channel remotely via net viewer z Record Setting Click Record Setting to enter into the menu interface user can select on off for each channel and adjust recording parameters audio pack time REC mode and REC schedule remotely via net viewer Alarm Setting Click Alarm Setting Device Alarm to enter into setup interface Click Alarm Setting Channel Alarm to enter into setup interface User can set up alarm event types also can set I O alarm for each channel motion detection alarm motion area motion sensitivity alarm out time buzzer time pre REC time and post REC time PTZ Setting SLEAN ALARN Click PTZ Setting to access setup l interface User can setup PTZ parameters remotely using the same methods as in the local DVR setup BOEWICE ALARH E Network Setting Click Network Setting Network to enter setup interface The menu allows user to set a lower bandwidth for Internet video transmission Click Network Setting Mobile to enter setup interface J E T Click Network Setting Email toenter Ej setup interface User can setup network parameters using the same methods as in the local DVR setup System Setting Click Advanced Setting System Set
22. ization level to enter into the security setting To set the ActiveX control and plug ins Select the following options y ActiveX control auto prompting V Run the script of the ActiveX control which is marked to be that can safely implement the Script y Implement initialization and run the script of the ActiveX control which is not marked to be that can Safely implement the script y Binary system and the script behavior V Download the unsigned ActiveX control V Download the signed ActiveX control y Perform the ActiveX control and pluggable unit It s extremely importation to enable the items above Prompt Before control installation please turn off any fire wall and anti virus software Internet Options Generel Secunty Privacy Content Connections Programs Advanced al Select a Web content zona bo specty te secunly setting 0O G interrest Loca nians Trusted cites Resincted het inteme This cone contain si Web Hier pou ty havent placed m other zones acu lesel hor thii Fore Custom Custom etiri To change the settings chck Custom Level Toute the recommended tetings cick Delat Level CurtomLevel DefaukLevel LOK Cancel Security Settings ActiveX controis and plug ins i Automatic prompting for ActiveX conbrols Disable Enable ig Binary and script behaviors Administrator approved l 2 Enable lig Download signed Actreex controts T Disable T
23. n t display To interrupt auto Sequencing press any button or click the mouse while in auto sequence mode EZOOM Click EZOOM to enter into zoom mode and then click left key and drag to select the a area that you want to magnify Right click to exit Click the right arrow ADVANCE button to display the advanced display functions depending on model POSE EE PIP 1 VO 6 WAY 9 WAY SWITCH HIDE PIP 2 QUAD 8 WAY ADVANCE SYSTEM SETTINGS Contains settings for most general system configurations such as recording Video display network alarm and PTZ Note In order to validate sub menu settings it is important to select to confirm actions Failure to select before exiting will mean changes have not been stored Note The green arrow shown on many sub menu screens will return settings on that screen to factory default Do note use the green arrow to exit the screen To exit the screen after saving parameters click the cross in the top right hand corner Recording There are three ways of recording live video Manual recording scheduled recording and motion recording Manual recording Simply select manual record from the main menu bar poo the remote control or front panel If the recording schedule is in conflict with manual recording the manual recording will be processed first until stopped Scheduled recording Within system settings in the main menu select record then record mode Select sch
24. nd install the control automatically After connecting to the internet IE will automatically download the file to PC as follows FJ web Uppication Maneper Micrevolt Internet Faploner Pe foe jes Febem Too emp i i i _ 7 but E Ai 1 P aa ch Pewien 2 The system will automatically enter the integra user interface as follows USEF LOGIN USER ID l PASSWORD METAR INTERNET Lik Ni Select English interface then input the chosen password if enabled USER ID Input user name The administrator has all authorities but common users may have limited usage authorities set by the administrator PASSWORD The password is as the same as the password of Device NETWORK LAN WAN Note If you connect the device in WAN the IP should be a public IP OPERATION INTERFACE Options in the main interface include LIVE REPLAY REMOTE SETTING LOCAL SETTING and LOGOUT Click any option to access LIVE Click Live to enter into the interface as follows al i ciao Beet T Jj T gueii 2 E eni n a N ja ETN as on zE pam p a are Vem Ss a CONTROL Move cursor to the icons which will become highlighted when selected Connect all windows or disconnect all windows Capture a single image Default save path is c DVR BACKUP Quick start recording all channels REPLAY Click REPLAY to enter playback mode Click right of calendar interface and gt to set the month for searching
25. ng viewed by left clicking the capture icon at any time Before capturing stills set the storage path in the settings menu to store the images in the desired folder on your PC Remote viewing Remote viewing and control of integra is possible via local network remote PC or most 3G mobile phones Before attempting any remote connections the integra must first be set up on a local connection to the internet NETWORK SETUP Select network from the system setting menu and then select network again from the sub menu UPNP Universal plug and play If your router supports UPNP turn this function on to allow integra to automatically map its port to get a mapped IP address If your router does not support UPNP you should select UPNP off and manually enter the settings TYPE Select here the network connection type DHCP PPPOE or Static MEDIA PORT Transfers video data between client and device WEB PORT Sets up the port of IE browser via HTTP Default 80 If the web port is changed the new port No should be added behind IP http 192 168 15 145 8088 SETUP PORT This port is fixed and you can t modify it the value is 8000 DNS input IP address for the net domain name Sever Static IP address set up IP ADDRESS input IP ADDRESS of the integra connection The format of the input is xxx xxx xxx xxx If the IP address has only two numbers x 3 plus three numbers enter O zero before each set of two numbers ie Oxx 0xx Oxx xxx SUB
26. rior notice DISCLAIMER OF WARRANTY The supplier shall not be liable to any party or any person except for replacement or reasonable maintenance of this product for the cases included but not limited to the following Any damage or loss including but not limited to direct indirect consequential special exemplary use arising out of or related to the product Inappropriate use or negligence of the user in operation of the product resulting in personal injury or any damage Unauthorized disassembly repair or modification of the product by the user Any problems or consequential inconvenience loss or damage caused by connecting this product to devices of the third parties Any claim or action for damages brought by any photogenic subject be it a person or organization due to violation of privacy whereby the surveillance picture and or saved data becomes public or is used for the purpose other than surveillance Elite Security Products Unit 7 Target Park Shawbank Rd Telephone 01527 515150 Lakeside Redditch B98 8YN email info espuk com www espuk com
27. ting to enter setup interface The menu allows user to set daylight saving time System INFO Click System INFO Version INFO to enter setup interface Here user can check the device s ID and software version Click System INFO HDD INFO to enter setup interface Here user can check HDD State total size of HDD and free size of HDD User Manager Click User Manager ADD OR DEL to enter setup interface This interface could only been seen by administrator when password is available Administrator can add new user or delete any user Click User Manager MODIFY PASSWORD OR PRI to enter setup interface This interface could only be seen by administrator when password is available Administrator can change password local authority and remote authority LOCAL SETTING Click Local Setting to enter setup interface User can setup the save path for local setting Record save path is for recording Frame save path is for capture and File save path is for download Click the button to Setup save path p LOGOUT Click Logout to log out of the system Mobile Phone Support A state of the art feature of this DVR device is transmitting live feed from the CCTV Cameras to your mobile phone so that you can have on the go access to your surveillance system from virtually anywhere in the world Currently there are a limited number of phones that can support this
Download Pdf Manuals
Related Search