Home

User manual - flixcar.com

image

Contents

1. your WI FI router e Remove any obstacles between AD 000VW and your Wi Fi router e Avoid using Wi Fi channel which is overlapped by the nearby Wi Fi network e Check if your network speed is fast enough in cases where multiple devices share the same router the AirPlay performance may be affected Turn off the other devices connected to your home router e Enable the Quality of Service QoS option if available on the Wi Fi router e Turn off other Wi Fi routers No AirPlay icon on my iTunes host device e Make sure that AD7000WV is already connected to your home WI FI network e Before you open iTunes make sure that you have enabled Bonjour service in your PC Take Windows XP for example to enable the service you can click Start gt Control Panel and double click Administrative Tools gt Services gt Bonjour Service then click Start followed by OK on the pop up menu e Ifthe problem remains try to restart AD 7000W AirPlay connection failed with Mac or PC e Temporarily disable the firewall and security software to see whether it blocks the ports that AirPlay uses to stream content See the help documentation of your firewall and security software on how to unblock the ports used by AirPlay e When you use iPod Touch iPhone iPad Mac PC for AirPlay if the music play breaks or stops try to restart your iPod Touch iPhone iPad iTunes or AD7000WV e Video streaming or FTP downloads may overload your
2. have more than one such devices In your house e stream audio to multiple AirPlay enabled devices at the same time from the iTunes music library on your PC Mac only Tip e Please visit www philips com welcome for information about more Philips AirPlay enabled devices With AD7OOOVY you can also e charge your iPod iPhone iPad through the USB socket with an Apple USB cable not supplied e play your i lunes music library on your iPod iPhone iPad through the USB socket directly while charging e play music from other audio devices through the MP3 LINK socket What s in the box Check and identify the contents of your package e Main unit with a built in Wi Fi module e 1 x AC power adapter e 1x MP3 link cable e Printed materials What else you need To stream audio wirelessly by AirPlay you need e AW Fi certified router e A host for your i lunes music library for example an iPod touch iPhone iPad installed with iOS 4 3 3 or later or a Wi Fi enabled PC Mac installed with iTunes 10 2 2 or later Your AD7000WV should be connected to the same local network as your ITunes host device through the Wi Fi router EN 5 List of compatible iTunes host devices for AirPlay In terms of AirPlay AD 7000VV is compatible with e a Wi Fi enabled PC Mac installed with iTunes 10 or later and e the following iPod iPhone iPad models installed with IOS 4 3 or later e iPad 2 e i
3. iPhone 4S users To ensure optimal performance of AirPlay streaming upgrade your iPhone 4S to iOS 5 1 or later Stream from your iPod touch iPhone iPad 1 Launch the iPod Music application on your iPod touch iPhone iPad 2 Tap on the AirPlay icon Ludwig van Beethoven compos Ges Symphony No 9 Scherzo 3 Select Philips Fidelio XXXX or user customized name from the AirPlay list amp iPhone Q Philips_Fidelio 21 3 Cancel EN 15 4 Select a media file and start play L gt After a while you will hear music from AD7O0OW j LUGWIG Van Beetnoven compos y Symphony No 9 Scherzo i44 i I o 3 Select Philips Fidelio _AirPlay XXXX or user customized name from the AirPlay list v CJ my Computer amp Philips_Fidelio 215B3B Multiple Speakers al ze e If you fail to hear music after successful setup do one of the following on your iPod touch iPhone iPad e 1 Disconnect and then re connect to the same Wi Fi router again e 2 Close all applications running at the background e 3 Power off and then power on your iPod touch iPhone iPad again Stream from your PC Mac 1 Launch iTunes 10 2 2 or a later version on your PC Mac 2 Click the AirPlay icon on the window 16 EN 4 Select a media file and start play L gt After a while you will hear music from AD7OOOW Tip e When you stream
4. whenever AD7000WV is powered on and connected to your home Wi Fi network automatically Before connection of AD7000WV to you home Wi Fi network check the points below 1 Make sure that your Wi Fi router Is powered on and working properly 2 Make sure that AD7000W has been powered on and booted up successfully 3 Identify the type of your Wi Fi router see the user manual of your Wi Fi router for details Scenario 1 Connect to a WPS router Note e Before you press any button on AD QOOW make sure that AD7O00W has been booted up successfully 1 Press the WPS button on your home Wi FI router 2 Shortly after step 1 press Wi Fi SETUP on the back of AD7000WV L gt The Wi Fi SETUP indicator blinks red yellow and green alternately L gt Within 2 minutes the WI FI SETUP indicator stops blinking and stays green and the unit beeps Ly AD OOOW is connected to your home Wi Fi network successfully e For some Wi Fi routers you may need to hold the WPS button for Wi Fi connection or enable the WVPS PBC function from the router configuration pages See the user manuals of the specific routers for details e Ifthe Wi Fi SETUP indicator on AD OOOW blinks yellow it means that the Wi Fi connection has failed Please wait for 2 minutes and try again If the problem remains try to set up the Wi Fi connection manually see Scenario 2 Connect to a non WPS router on page 9 e If the Wi Fi connec
5. with Wi Fi 802 11b g certified routers e f your Wi Fi router is Wi Fi 802 11n certified make sure to enable the 802 11b g mode AD Q00W does not support connection to routers with 802 11n only e This device does not support the WPS PIN method e If your Wi Fi router supports WPS and the W PS PBC method but fails to connect to AD 7000WV try the manual Wi Fi setup method see Scenario 2 Connect to a non WPS router on page 9 e Enable SSID broadcast on the Wi Fi router e Keep away from potential sources of interference which may affect Wi Fi signal such as microwave ovens e If you fail to use your PC for Wi Fi network setup check whether your PC is using a Wi Fi network You cannot use Ethernet connection for AirPlay network setup e Make sure that the SSID name of your home router consists of alphanumeric characters with no space or special characters like inserted e If you choose to rename the AirPlay device Philips Fidelio XXXX in the setting menu do not use special characters or symbols e For some new types of Wi Fi routers a network name SSID may be created automatically when you use WPS for connection Always change the default network name SSID to a simple one that consists of albhanumerical characters and also change the Wi Fi security mode to secure your network Occasional breaking of AirPlay music streaming Do one or all of the following e Move AD OOOW closer to
6. your AD O00W in Advanced settings gt AirPlay Device Name on the AD 000W configuration web page This is helpful when you have multiple Philips AirPlay enabled devices in your house and you need to distinguish between them If you want to enter the network name SSID manually for example if you want to hide your SSID go to Advanced settings gt CONFIGURE MANUALLY on the AD7000WV configuration web page Restore your Wi Fi enabled device back to your existing home Wi Fi setting Note e Make sure that the settings at steps 2 to 3 below match your home Wi Fi network settings you wrote on paper 1 14 Select Settings gt Wi Fi on your iPod touch iPhone iPad e Or open the list of available Wi Fi networks on your PC Mac EN gt gt 2 Select your network name SSID from the list of available wireless networks Wi Fi Networks Settings Ask to Join Networks on E Known networks will be joined automatically if no known networks are 3 Enter the network key if required 4 Wait until successful Wi Fi connection to your home WI Fi network 5 Play Stream audio from your iTunes music library to AD7000VW e Make sure that your iTunes host device is connected to the same Wi Fi network as AD7000W Your i Tunes device can be an iPod touch iPhone iPad installed with IOS 4 3 or later or a Wi Fi enabled PC Mac installed with iTunes 10 or later e For
7. Always there to help you Register your product and get support at www philips com welcome f N AD7000W Question Contact Philips User manual PHILIPS Contents 1 Important 2 Safety Notice 3 2 Your Entertainment System 5 Introduction J What s in the box 5 What else you need 5 Overview of the main unit 6 Get started to use AirPlay 6 3 Prepare 7 Connect power 7 Turn AD7OOOW on 7 4 Connect to your home Wi Fi network for AirPlay 8 Scenario 1 Connect to a WPS router 8 Scenario 2 Connect to a non WPS router 9 5 Play 15 Stream audio from your i lunes music library to AD7000VV 15 Control play ir Use advanced sound settings 17 Play charge your iPod iPhone iPad through USB socket 17 Play from an external device 18 6 Update firmware 19 Download the update file 19 Update from the configuration page 1 7 Product information 21 Specifications 2 8 Troubleshooting 22 EN 1 Important Safety Information for Europe Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL TEn A The exclamation mark calls attention to features for which you should carefully read the supplied literature to prevent operating and maintenance problems The lightening bolt symbol indicates uninsulated com
8. Bar Ctrl Shift T Hide Status Bar Ctri Pie History Ctrl H ese sel applicable Downloads Ctrl Alt L connect y Pinasa sai Private Browsing a Reset Safari Block Pop Up Windows Ctrl Shift K Baa Coto Vey ori Mido 1 os cod wh on D woh cog aw iIncroter Vow Help Report Bugs to Apple Safari Extensions Gallery About Safari 2 Tick Include Bonjour for Bookmarks bar Bookmarks Lal Ed RSS AutoFill Ss a Advanced Bookmarks bar Bookmarks menu _ Include bookmarks bar C tnelude Bonjour Collections J Include Bonjour 3 Select Philips_Fidello XXX from the Bonjour pull down list shown at the bookmarks bar L gt The AD OOOW configuration web page Is displayed to connect your vleless Yahoo Go miosattine the ips Fidelio 2c68F About Bonjour Philips Fidelio 215538 sswerd if Click Apply to ect Opter ca ree phps sar weere APOR M Amtek Palp Frera MN Mrge ninad l EOBNA JAT T Vierirk ijen Ihi ips Flnetrnnice LY Allg centre Cato Yee Aio PAdo D cod ANo woh OAR innere no Change the internal Wi Fi settings of AD7000W On the AD7000WV configuration web page you can change the internal WI FI settings of AD7000WV for connection of AD7000VV to your existing home Wi Fi network Note e Make sure that the settings on the configuration web page match your home Wi Fi network settings that you wrote on pape
9. Pad e Phone 4 e iPhone 3GS e iPod touch 2nd 3rd and 4th generation Overview of the main unit 1 1 Power indicator Q e Turn the unit on off e Press and hold reset the unit G e Adjust volume 4 WI FI SETUP button indicator e Connect the unit to a Wi Fi network e Show the Wi Fi connection status of the unit S MP3 LINK e Connect an external audio player through the supplied MP3 link cable 6 DC IN e Connect the power adaptor 7 USB lt gt e Connect an Pod iPhone iPad through an Apple USB cable not supplied Get started to use AirPlay To get started with AirPlay you need to Upgrade your iPod touch iPhone iPad to the latest iOS version iOS 4 3 or later e Or install the latest version of iTunes iTunes 10 or later on your PC Mac Connect power to AD7000WV then turn it on see Prepare on page Connect AD OQOOW to your existing home Wi Fi network see Connect to your home Wi Fi network for AirPlay on page 8 Make sure that your iPod touch iPhone iPad or PC Mac are also connected to the same Wi Fi network 3 Prepare Always follow the instructions in this chapter in sequence Connect power ae Caution e Risk of product damage Make sure that the power supply voltage matches the voltage printed on the bottom of the unit e Risk of electric shock When you unplug the AC adaptor always pull the plug from t
10. audio from your iTunes music library on a PC Mac you can select more than one AirPlay enabled devices if available at step 3 to stream music to all of them at the same time e If you are using an earlier version of iTunes the AirPlay icon may be instead of Cal Control play You can select different play options from either your iTunes host device or AD7000WV Note e Make sure that you have successfully streamed audio from your iTunes music library to AD 000W e To pause or resume play press H e To adjust volume press repeatedly Ea e If you are streaming music from a PC Mac to control music play from AD7000WV launch iTunes and tick Allow iTunes audio control from remote speakers in Edit for Windows or iTunes for Mac gt Preferences gt Devices Use advanced sound settings If your iTunes host device is an iPod touch iPhone iPad For advanced sound settings and additional features you can use your iPod touch iPhone iPad to download the Philips SoundStudio application from Apple App Store It is a free application from Philips If your iTunes host device is a Wi Fi enabled PC Mac For advanced sound settings you can use the equalizer available on ITunes directly View gt Show Equalizer Tip e See the iTunes help documentation for more details Play charge your iPod iPhone iPad through USB socket Note e The USB socket
11. ay from the list e During Wi Fi network connection do not connect any of available networks network cable to your PC Mac 1 Open the Wi Fi setup tool or control panel on your PC Mac EN 11 2 Scan the available Wi Fi networks Tip Wireless Network Connection e If Philips Fidelio AirPlay is not in the list try to scan the Network Tasks Choose a wireless network available Wi Fi networks agai n Chek an tem in the Ist below to conect to a wireless network in range or to get more lt 3 Set up a wireless network ior a home or small office Related Tasks Y team atout obs Searching for wireless retworis nang Open the built in web page of red aes AD7000VW Ge Sene ahenea 1 Launch Apple Safari browser or any other Internet browser on your Wi Fi enabled device 2 Type in 192 168 1 1 at the browser address bar and confirm 3 Select Philips Fidelio AirPlay from the list L gt The AD7O00W configuration web of available networks page is displayed i Wireless Network Connection Network Tasks Refresh network list a par up a wireless network a home or small office Related Tasks nD Learn about wireless networking Change the order of preferred networks Change advanced settings a Security enabled wireless network WPA2 go Era device Tt name change Philips Fidelio device name Philos Fidelio 2398FA 4 Wait until successful Wi Fi connection on At y
12. delio AirPlay L gt t may take up to 45 seconds for successful creation of this new Wi Fi network After you finish manual Wi Fi setup for AD 7000VV the new Wi Fi network created by AD7000WV will disappear If you fail to enter Assisted Wi Fi Setup mode power off AD OOOW and power on it then try again after successful boot up Make sure that there are no other Philips AirPlay enabled devices in Assisted Wi Fi Setup mode at the same time Multiple Wi Fi networks created this way may interfere with each other Connect your Wi Fi enabled device to Settings Wi Fi Networks the newly created Wi Fi network The new Wi Fi network created by AD7000W only allows access of one Wi Fi enabled device To avoid interference from any other Wi Fi devices you are Philips Fidelio AirPlay recommended to temporarily disable the Wi Fi function on your other Wi Fi devices Option 1 Use your iPod touch iPhone iPad 1 Select Settings gt Wi Fi on your iPod touch iPhone iPad Settings en T 3 Wait until successful Wi Fi connection on your iPod touch iPhone iPad L gt is displayed at the upper left corner of your iPod touch iPhone iPad Tip e f Philips Fidelio AirPlay is not in the list try to scan the available Wi Fi networks again Option 2 Use your Wi Fi enabled PC Mac e See the user manual of your PC Mac for how to connect your PC Mac to a Wi Fi network 2 Select Philips Fidelio AirPl
13. en Apple Safari on your PC Mac then select Philips_Fidelio XXX from the Bonjour pull down list e Or open any other Internet browser on your PC Mac then type in the IP address of AD 0O00W available on the Wi Fi router configuration page at the address bar L The AD OOOW configuration web page Is displayed EN 19 Go 4 Follow the on screen instructions to complete the firmware update o e In case the firmware update fails you can try the above procedures again e After successful firmware update if there is any problem with the Wi Fi connection press and hold on AD7000W for more than 5 seconds to reset the device and then try to set up the Wi Fi network for AD7000W again see Connect to your home Wi Fi network for AirPlay on page 8 20 EN 7 Prod uct General information o o AC power Input 100 240 information V 50 60 Hz 1A 1 2A Output 12 Note V 30A e Product information is subject to change without prior Operation Power 25 W notice Consumption Power Consumption lt 0 5 W in Standby Mode Dimensions Specifications Main Unit LxWxH 298 x 98 x 168 mm Weight Amplifier With Packing 2 02 kg Rated Output Power 2X5 W RMS Frequency Response 63 Hiz 18 Main Unit 1 36 kg aace AB Signal to Noise Ratio gt 90 dB Mies EDK 600 mV RMS 20 kohm Speakers Speaker Impedance 8 ohm Speaker Driver 66 mm full range Sensitivity 82 dB m W Wireless Wirele
14. eveloper to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance AirPlay iPod and iPhone are trademarks of Apple Inc registered in the U S and other countries iPad is a trademark of Apple Inc Class Il equipment symbol aI CLASS II apparatus with double insulation and no protective earth provided Note e The type plate is located on the bottom of the apparatus 2 Your Entertainment System Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome If you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the bottom of the apparatus Write the numbers here Model No Serial No Introduction Apple AirPlay technology enables you to play your ITunes music library hosted on a Mac PC iPhone iPod touch or iPad on any AirPlay enabled device for example your AD7000VV connected to the Wi Fi network With an AirPlay enabled device for example your AD7000VV you can e stream audio from your i lunes music library to any room in your house e choose which AirPlay enabled devices you want to play music on if you
15. he socket Never pull the cord e Before you connect the AC adaptor make sure that you have completed all the other connections N MP3 LINK WI FI SETUP e Connect the AC power cord to e the DC IN socket on the back of the unit e the wall power socket Turn AD7OOOW on Press on the back to turn the unit on Wart for successful boot up of the unit L The boot up takes about 35 seconds L gt During boot up the WI FI SETUP indicator on the back of the unit blinks green quickly L gt After boot up if no Wi Fi connection has been set up for AD7000WV the WI FI SETUP indicator starts to blink green slowly To switch the unit to Eco standby mode press O To switch the unit on from Eco standby mode press again EN 7 4 Connect to your home Wi Fi network for AirPlay To connect AD7000WV to your existing home Wi Fi network you need to apply your home Wi Fi settings to AD7000WV You can do this in two ways depending on which type of Wi Fi router you use e Automatically if your Wi Fi router is WPS Wi Fi Protected Setup enabled and supports PBC Push Button Connection see Scenario 1 Connect to aWPS router on page 8 e Manually if your Wi Fi router does not support WPS see Scenario 2 Connect to a non WPS router on page 9 Once connected successfully AD 7 000VV will remember your home WI FI settings Then you can enjoy AirPlay
16. is only compatible with iPod iPhone iPad You can play or charge your iPod iPhone iPad through the USB socket with an Apple USB cable not supplied If you have stopped audio streaming by AirPlay after successful USB connection the unit switches to the USB source automatically e Connect an Apple USB cable not supplied to EN 17 e the USB socket on the back of AD7000W e the dock connector on your Pod iPhone iPad Compatible iPod iPhone iPad The USB socket supports play and charge of the following iPod iPhone and iPad models iPad 2 e iPad e iPhone 4 e iPhone 3GS e iPhone 3G e iPhone iPod classic e iPod 5G Pod 4G e iPod nano 2nd 3rd 4th 5th and 6th generation e iPod touch 1st 2nd 3rd and 4th generation Play from an external device You can also listen to an external audio player through the unit Connect the supplied MP3 link cable to e the MP3 LINK socket on the back of the unit e the headphone socket on an external audio player 2 Press the MP3 LINK button on the back of the unit to switch to the MP3 link source Start music play on the external audio player Tip e To switch back to the AirPlay or USB play mode you just need to select a song on the connected iPod iPhone iPad and start play again 6 Update firmware Note e You can only update the firmware from a PC Mac Download the
17. our PC Mac Please select your wireless network and enter your network password if applicable For advanced network setup please click Advanced Click Apply to connect your wireless Wireless Network Connection POEET eae Choose a wireless network Refresh network list Click an item in the list below to connect to a wireless network in range or to get more A 2 Set p a wireless network Philips Fidelio AirPlay Connected for a home or small office speaker to your network Please select your Wi Fi network Select Option Related Tasics to this network To disconnect from this UD Learn about wireless networking ve Change the order of preferred networks o pamana gt Change advanced g Security enabled wireless network settings Co wee e ji Security enabled wireless network oo g Security enabled wireless network i ai If you use Safari on your Wi Fi enabled PC ES Mac you can also select Philips Fidelio XXX from the Bonjour pull down list to enter the AD7000W configuration web page directly 12 EN 1 Click gt Preferences L gt The Bookmarks menu is displayed Fle Ek we tow ne Lt Ble ithe tibo Sten lend risan fj m m ee eo wapare ope rere opar E i Philips Fidelio Welcone to Phi D Herwork Configuration spea lt sr to your Customize Toolbar tmm pats Pet Hide Menu Bar Phage Fi Hide Bookmarks Bar Ctrl Shift B Hide Tab
18. ponents within the product that can cause an electric shock To reduce the risk of fire or electric shock do not expose the product to rain or moisture and do not place any objects filled with liquids such as vases on the product Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this product near water Clean only with dry cloth Sioe Do not block any ventilation openings Install in accordance with the manufacturer s instructions N EN Do not remove the casing of this product 9 Do not expose the product to dripping splashing water rain or high humidity Keep this product away from direct sunlight naked flames or heat 1 Do not install near any heat sources such as radiators heat registers stoves or other electrical equipment including amplifiers 42 Do not place any other electrical equipment on the product 43 Do not place any sources of danger on the product e g objects containing liquids burning candles Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable UN Warning e Never remove the casing of this apparatus e Never lubricate any part of this apparatus e Never place this apparatus on other electrical equipment e Keep this apparatus away from direct sunlight naked flames or heat e Ensure that you always have easy access to the
19. power cord plug or adaptor to disconnect this apparatus from the power Risk of overheating Never install this apparatus in a confined space Always leave a space of at least four inches around this apparatus for ventilation Ensure curtains or other objects never cover the ventilation slots on this apparatus Mains fuse This information applies only to products with a UK mains plug This product is fitted with an approved molded plug If you replace the fuse use one with e the ratings shown on the plug e a BS 1362 approval and e the ASTA approval mark Contact your dealer if you are not sure about what type of fuse to use Caution lo conform with the EMC directive 2004 108 EC do not detach the plug from the power cord Notice C 0560 Hereby WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC You can find the Declaration of Conformity on www philips com support Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V Specifications are subject to change without notice WWOOX reserves the right to change p
20. r sesona Cx Philips Fidelio Welcome to Philips Fidelio setup page Follow the steps below to connect your wireless speaker to your wireless network You can keep the default device name or modify the device name by modifying the text in the text box Click Apply to proceed with device name change Philips Fidelio device name Philios Fidelio 2248FA Please select your wireless network and enter your network password if applicable For advanced network setup please click Advanced Click Apply to connect your wireless speaker to your network Select Option E lt M Please select your Wi Fi network e Follow the on screen instructions to change and confirm the internal Wi Fi settings of AD 000W L gt After a while the indicator on the back of AD 7000W stops blinking and stays green and the unit beeps L gt AD OOOW is connected to your existing home Wi Fi network successfully EN 13 If the WI FI SETUP indicator on AD QOOW does not stay green steadily it means that the Wi Fi connection has failed Please power off both your Wi Fi router and AD7000WV and then power on them again to see whether AD7QOOW can be connected to your home Wi Fi network If the problem remains try the above procedures again After you finish the above changes or power off and power on of AD 000W the new Wi Fi network created by AD 000W will disappear lt E If you like you can change the name of
21. roducts at any time without being obliged to adjust earlier supplies accordingly ao Your product is designed and manufactured with high quality materials and components which can be recycled and reused R When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Made for iPod LjiPhone _ iPad Lad AirPlay Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively EN and has been certified by the d
22. router and therefore may cause Interruptions during AirPlay music play Iry to reduce the load of your router EN Ze PHILIPS Specifications are subject to change without notice 2013 WOOX Innovations Limited All rights reserved This product was brought to the market by WOOX Innovations Limited or one of its affiliates further referred to in this document as WOOX Innovations and is the manufacturer of the product WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V AD7000W_10 12_UM_V2 0
23. ss 802 11b g standard Wireless VE Gor 26 bit security WPA WPA2 8 63 characters Frequency 2412 2462 MHz CH1 range CATOIA T D477 2412 2472 MHz CH1 CH13 for 12 10 05 PBC one Ves button push EN 21 8 Troubleshooting Warning e Never remove the casing of this apparatus To keep the warranty valid never try to repair the system yourself If you encounter problems when using this apparatus check the following points before requesting service If the problem remains unsolved go to the Philips web site www philips com welcome VVhen you contact Philips ensure that the apparatus Is nearby and the model number and serial number are available No power e Make sure that the AC power plug of the device is connected properly e Make sure that there is power at the AC outlet No sound e Adjust the volume Check the Wi Fi network connection Set up the network again if needed see Connect to your home Wi Fi network for AirPlay on page 8 No response from the unit e Press and hold on AD OOOW for more than 5 seconds to reset the device Then set up the Wi Fi network for AD7QOOW again see Connect to your home Wi Fi network for AirPlay on page 8 e Disconnect and reconnect the AC power plug and then switch on the device again Wi Fi network connection failed e Check if your Wi Fi router is Wi Fi 802 11b g certified This device 22 EN is only compatible
24. tings of AD7000WV based on the settings you wrote on paper at step 1 see Change the internal Wi Fi settings of AD7QOOW on page 13 6 Restore your Wi Fi enabled device back to your existing home Wi Fi settings see Restore your Wi Fi enabled device back to your existing home Wi Fi setting on page 14 EN 9 Collect settings of your home Wi Fi router Note e Always consult the user manual of your home Wi Fi router for detailed instructions 1 Connect your Wi Fi enabled device to your existing home WI FI network 2 Launch the Internet browser for example Apple Safari or Microsoft Internet Explorer on your Wi Fi enabled device 3 Open the configuration page of your home Wi Fi router 4 Find the Wi Fi settings tab and write down the following information on paper A Network name SSID Wi Fi security mode usually WEP WPA or WPAZ if enabled Wi Fi password if Wi Fi security Is enabled D DHCP mode enabled or disabled E Static IP address settings if DHCP mode is disabled Switch AD7000WV to Assisted Wi Fi Setup mode Note e Before you press any button on AD7000WV make sure that AD7O00W has been booted up successfully 10 EN Press and hold Wi Fi SETUP on the back of AD 000W for more than 5 seconds L The Wi Fi SETUP indicator blinks green and yellow alternately L gt Anew Wi Fi network created by AD OOOW will appear with the network name SSID of Philips Fi
25. tion fails again press and hold on the back of AD7000WV to reset it and then try again Scenario 2 Connect to a non VWPS router Note e You can also follow the procedures below to connect AD 000W to a WPS router manually To connect AD7000WV to a Wi Fi router manually you need access to AD 000W s built in configuration web page for change of its internal Wi Fi settings To do so you need a Wi Fi enabled device with an Internet browser for temporary Wi Fi connection to AD7000WV The Wi Fi enabled device can be an iPod touch iPhone iPad or a Wi Fi enabled PC Mac Follow the sequence below for connection of AD 000W to a non WPS Wi Fi router 1 Collect settings of your home Wi Fi router and write down on paper for use during AD 000W Wi Fi setup see Collect settings of your home Wi Fi router on page 10 2 Switch AD7000W to Assisted Wi Fi Setup mode see Switch AD QOOW to Assisted Wi Fi Setup mode on page 10 L Anew Wi Fi network created by AD7000WV will appear with the network name SSID of Philips Fidelio AirPlay 3 Connect your Wi Fi enabled device to the newly created Wi Fi network temporarily see Connect your Wi Fi enabled device to the newly created Wi Fi network on page 11 4 Open the built in web page of AD7000W with the Internet Browser of your WI FI enabled device see Open the built in web page of AD 00Q0W on page 12 5 Change the internal Wi Fi set
26. update file estor Relations E www philips com support 4s j a www philips com support ur product Log i a re Service and Il products gt Sound and vision gt Home audio gt iPhone iPod and iPad docking af United Kingdom English Register your product Log in XXXX E Software and drivers Firmware Upgrade Software 1 On your PC Mac go to www philips com support 2 Enter the model number to find the latest firmware upgrade file available 3 Save and unzip the upgrade file to your hard drive Update from the configuration page Warning e Always connect your AD7000WV to AC power for firmware upgrade Never power off your AD7000W during firmware upgrade e To use an Internet browser other than Apple Safari on your PC Mac remember to go to the Wi Fi router configuration page and write down the IP address of your AD7000WV See the user manual of your Wi Fi router for how to find the IP addresses of devices connected to the Wi Fi router 1 Power on AD7000W L gt It takes about 35 seconds for the unit to boot up During boot up the WI FI SETUP indicator on the back of the unit blinks green quickly L After boot up you can hear a beep and the WI FI SETUP indicator turns to green steadily AD7000WV is connected to the last configured Wi Fi network automatically 2 Make sure that AD7000WV and your PC Mac are connected to the same WI FI router 3 Op

Download Pdf Manuals

image

Related Search

Related Contents

Operating Instructions Calibry 5.0 Pipette  StarTech.com 2m DVI-D Single Link Cable - M/M  LICITACIÓN PRIVADA No. 05 DE 2013 OBJETO: SUMINISTRO DE  manuale serv at41502 en  Istruzioni per l`uso Bilancia di precisione  USER MANUAL - Vetlab Supplies Ltd  dynabook Tab VT484シリーズを お使いのかたへ  English owner`s manual  EonStor A08U-C2412  48-2000RM  

Copyright © All rights reserved.
Failed to retrieve file