SC9715 - Electronic Pocket Scale USER MANUAL
Contents
1. S C9715 Electronic Pocket Scale USER MANUAL Thank you for purchasing our pocket scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service Never load the scale with more than the maximal capacity Overloading can permanently damage it Avoiding any exposure to extreme heat or cold your scale works better when operated at normal room temperature Always allow the scale to acclimate to normal room temperature for at least 1 hour before use Give your scale sufficient warm up time Usually 30 seconds to give the internal components a chance to stabilize before calibration Keep your scale in a clean environment Dust dirt moisture vibration air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale Handle with care Gently apply all items to be weighed onto tray top Although this scale is designed to be quite durable try to avoid rough treatment as this may permanently damage the internal sensor Avoid shaking dropping or otherwise shocking the scale This is a precision instrument and must be handled with extreme care Only operate the scale on a stable vibration free surface I OPERATION 1 Place scale on a horizontal flat surface press ON OFF key to turn on the scale 2 Wait until 0 0 or 0 00 i2. s displayed 3 Put the object s on the weighing platform 4 Using the MODE key you can switch between the weighing units ll TARE WEIGHING 1 Turn on scale as described above 2 Place the tare item on the platform 3 Press TARE and wait until 0 0 or 0 00 is displayed 4 Add the net weight item lll CALIBRATION 1 Turn on the scale by pressing ON OFF key 2 Wait until the LCD displays 0 0 or 0 00 and then press and hold MODE key for 3 seconds the LCD will display CAL and then release the MODE key 3 Press the MODE key again the LCD will display CAL followed by the required calibration weight 4 Place the required weight on the scale the display will show PASS Calibration is complete IV SPECIFICATION Calibration Auto calibration Tare range Tare full capacity Operation temperature 10 30 C Display LCD 5 1 2 digits Power 2 x AAA batteries FDJ On Time 800 323 6091 Www fdjtool com FDJ On Time presents the manufacturer s instructions in a useful organized form Original instructions are available with the product
Download Pdf Manuals
Related Search