LED DUOBEAM Dual Moonflower Effect
Contents
1. qtx LED DUOBEAM Item ref 151 602UK Dual Moonflower Effect User Manual www avsl qtx com an NS group brand qtx Introduction Thank you for choosing the QTX LED DUOBEAM quad colour dual LED barrel light as part of your effect lighting rig Please read these instructions in full to gain the best results from this item and avoid damage through misuse Unpacking Your LED DUOBEAM should reach you in good condition and be supplied with appropriate mains lead s and mounting bracket If there are any signs of damage or items missing from the packaging contact your dealer immediately Warning To prevent risk of fire or electric shock do not expose any components to rain or moisture If liquids are spilled on the housing disconnect mains and allow unit to dry out amp have checked by qualified personnel before further use Avoid any impact or extreme pressure to the housing No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel Safety Check for correct voltage and condition of IEC lead before connecting to power outlet e Ensure DMX leads are good condition with no short connections or damaged plugs Placement e Mount the unit to a lighting stand or ceiling using the adjustable bracket included If the unit is mounted at height a drop cable should be attached for safety If free standing ensure that the unit is sited on a stable non slip surface e Ens2. amp fuse holder Mode programming buttons TN AOS Nas a a Channel 1 Mode setting 7 DMX input XLR 8 DMX output XLR A A PT ETS Y axis as Coe Right head green output 151 604UK User Manual Gqtx Specifications Power supply 100 240Vac 50 60Hz IEC Operating modes Auto Sound activated Master Slave DMX DMX in out XLR Mains inlet IEC Troubleshooting No Check mains voltage is correct and outlet is switched on P Check IEC lead and mains fuse if fuse continually blows refer to your dealer Check rear panel mode settings SOU2 with no sound slave mode DMX etc No light output No sound activation Unresponsive to DMX Check DMX X axis and Y axis settings MO Oat er MOVEmeNE Check that barrel is not stuck or blocked by foreign object Ensure that the unit is not too close to a heat source Overheating cutting out Ensure that the cooling vent on the rear panel is clear and not covered Errors and omissions excepted Copyright 2013 AVSL Goup Ltd 151 604UK User Manual
3. ure adequate access to controls and connections Cleaning Use a soft dry or slightly damp to clean the cabinet Do not use strong solvents for cleaning the unit Setting up Install the LED DUOBEAM so that the front panel is facing the area to be lighted Experiment with positioning to get the best coverage from the mirrored beams For DMX or master slave control link control signals with XLR leads from DMX out to DMX in connectors Connect mains using an appropriate IEC lead to the mains inlet Operation The LED DUOBEAM can be operated in either DMX or standalone auto and sound activated modes For auto or sound activated modes you can select 1 unit to be master with XLR connection to a slave Select the mode to be used via the 4 button panel with digital display as shown below Display Mode Function DMX512 Address setting A001 A512 Receives control via XLR from another LED DUOBEAM Auto programme mode Auto run sequence to internal programme ae Sou l sound activated mode 1 Sound to light with auto run when no sound present Souc sound activated mode 2 Sound to light with LEDs off when no sound present 151 602UK User Manual Rear Panel MAX MIN 2 SOUND SENSITIVITY MIC POWER IN 100 240W 50 60Hz TE n qtx O or mp or as Q O MENU UP DOWN ENTER Sa gt Microphone sensitivity control Sound activation microphone 5 Cooling fan vent 6 Digital display IEC mains inlet
Download Pdf Manuals
Related Search