Vacuum Cleaner (Dry type)
Contents
1. a kita r Dry type 008448 0 DOUBLE INSULATION nd UNDERSTAND before using OR FUTURE REFERENCE ENGLISH SPECIFICATIONS Model 407 Peak air flow 3 0m min Sealed suction 20 6 kPa 2 100 mm of water Recoverable capacity Dust 32L Dimensions L x W x H 478 mm x 422 mm x 699 mm Net weight 10 3 Kg Due to our continuing programme of research and development the specifications herein are subject to change without notice Note Specifications may differ from country to country ENB057 1 SAFETY INSTRUCTIONS Warning When using vacuum cleaner safety precautions should always be followed to reduce the risk of fire electric shock and personal injury including the following READ ALL THESE INSTRUCTIONS Do not use the cleaner without the filter Replace a damaged filter immediately 2 USE OF EXTENSION CORD When using an extension cord because of the great distance to your power source try to employ a cord that is sufficiently thick but not too long or cleaner performance will be adversely affected For outdoor applications use an extension cord suitable for outdoor use 3 VOLTAGE WARNING Before connecting the cleaner to a power source receptacle outlet etc be sure the voltage supplied is the same as that specified on the nameplate of the cleaner A power source with voltage greater than that specified for the cleaner can result in SERIOUS INJURY to the u2. arp edges Do not fold tug or step on the hose Stop the cleaner immediately if you notice poor performance or anything abnormal during operation DISCONNECT THE CLEANER When not in use before servicing and when changing accessories Clean and service the cleaner immediately after each use to keep it in tiptop operating condition MAINTAIN THE CLEANER WITH CARE Keep the cleaner clean for better and safer performance Follow instructions for changing accessories Inspect cleaner cords periodically and if damaged have repaired by authorized service facility Inspect extension cords periodically and replace if damaged Keep handles dry clean and free from oil and grease CHECK DAMAGED PARTS Before further use of the cleaner a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment of moving parts binding of moving parts breakage of parts mounting and any other conditions that may affect its operation A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual Have defective switches replaced by authorized service center Don t use the cleaner if switch does not turn it on and off 20 REPLACEMENT PARTS When servicing use only identical replacement parts 21 STORE IDLE CLEANER When not in use th
3. de of the switch ASSEMBLY ACAUTION Always be sure that the tool is switched off and unplugged before carrying out any work on the tool Installing hose ACAUTION Do nat fold tug nor step on the hose Never yank the cleaner to carry it 1 Hose inlet 2 Hose Insert the hose into the hose inlet and turn clockwise until fully secured Installing polyethylene bag 1 Polyethylene bag 2 Hook 3 Holder plate 4 Tank Tool can be used without polyethylene bag also Spread the polyethylene bag in the tank Insert it between the holder plate and the tank and pull it to the hose inlet Hook up the other side of the bag on the pipe holder hook Spread the bag around the top of the tank Follow instructions of Installing cloth filter for installing the bag so that the filter hook of cloth filter holds the bag NOTE Polyethylene bag 45 L can be used More than 0 04 mm thick one is recommended Too much dust will tears the bag easily so do not collect the dust more than the half of the bag capacity Installing cloth filter A CAUTION The cloth filter is for dry wet application so install it for wet use also 1 1 Filter hook 2 Tank 3 Cloth filter 4 Polyethylene Po 3 bag Install the cloth filter on the tank Always be sure that there is no gap between the filter hook on the cloth filter and the tank after installing OPERATION Dust disposal ACAUTION Always be sure that the tool is
4. e cleaner should be stored indoors 22 Be kind to your cleaner Rough handling can cause breakage of even the most sturdily built cleaner 23 Do not attempt to clean the exterior or interior with benzine thinner or cleaning chemicals Cracks and discoloration may be caused 24 Do not use cleaner in an enclosed space where flammable explosive or toxic vapors are given off by oil base paint paint thinner gasoline some mothproofing substances etc or in areas where flammable dust is present 25 Do not leave the cleaner cord lying on the floor after you have finished a cleaning job It can become a tripping hazard or may cause damage to the cleaner 26 Do not operate this or any tool while under the influence of drugs or alcohol 27 As a basic rule of safety use safety goggles or safety glasses with side shields 28 Use a dust mask in dusty work conditions 29 The cleaner is not intended for use by young children or infirm persons without supervision 30 Young children should be supervised to ensure that they do not play with the cleaner 31 Never handle plug cord or cleaner with wet hands 32 Use extreme caution when cleaning on stairs SAVE THESE INSTRUCTIONS FUNCTIONAL DESCRIPTION ACAUTION Always be sure that the tool is switched off before connecting the tool to a power source Switch action 1 Switch To start the tool press the ON side of the switch To stop press the OFF si
5. ng machine To maintain product SAFETY and RELIABILITY repairs any other maintenance or adjustment should be performed by Makita Authorized Service Centers always using Makita replacement parts ACCESSORIES A CAUTION These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of injury to persons Only use accessory or attachment for its stated purpose If you need any assistance for more details regarding these accessories ask your local Makita Service Center Hose 2 5 m 5 m Straight pipe Corner nozzle Round brush Powder filter For dry type Nozzle assembly Bent pipe Polyethylene bag Paper filter For dry type Holder set Makita Corporation Anjo Aichi Japan 884366B078
6. ser as well as damage to the cleaner If in doubt DO NOT PLUG IN THE CLEANER Using a power source with voltage less than the nameplate rating is harmful to the motor 4 AVOID UNINTENTIONAL STARTING Be sure switch is OFF when plugging in 5 Do not attempt to pick up flammable materials fire works lighted cigarettes hot ashes hot metal chips sharp materials such as razors needles broken glass or the like 6 NEVER USE THE CLEANER IN THE VICINITY OF GASOLINE GAS PAINT ADHESIVES OR OTHER HIGHLY EXPLOSIVE SUBSTANCES The switch emits sparks when turned ON and OFF And so does the motor commutator during operation A dangerous explosion may 12 13 14 15 result Never vacuum up toxic carcinogenic combustible or other hazardous materials such as asbestos arsenic barium beryllium lead pesticides or other health endangering materials Never use the cleaner outdoors in the rain Do not use close to heat sources stoves etc GUARD AGAINST ELECTRIC SHOCK Prevent body contact with grounded surfaces For example pipes radiators ranges refrigerator enclosures Do not block cooling vents These vents permit cooling of the motor Blockage should be carefully avoided otherwise the motor will burn out from lack of ventilation Keep proper footing and balance at all times DO NOT ABUSE CORD Never carry the cleaner by cord or yank it to disconnect from receptacle Keep cord away from heat oil and sh
7. switched off and disconnected to a power source before disposing the dust Do nat handle the tank roughly it may damage the tool Empty the tool everyday before the tank becomes too full Or the suction force will weaken 1 Cowling 2 Hook Unlock the hook and lift the cowling upward Remove dust or particles adhering to the cloth filter NOTE Take the polyethylene bag out of the tool carefully so that the protrusions of the tank will not tear the bag apart Too much dust will tears the bag easily so do not collect the dust more than half of the bag capacity Storage of accessories 1 Bent pipe 2 Cleaner base 3 Straight pipe Both the straight pipe and bent pipe can be stored after use just by inserting them in the holes in the cleaner base 1 Pipe holder A pipe holder is equipped on the side of the cleaner to keep the straight bent pipe out of the way during vacuuming breaks MAINTENANCE ACAUTION Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance Cleaning 1 Cloth filter 2 Tank 3 Frame Clogged filters cause poor suction performance Clean out the filters from time to time To remove dust or particles adhering to the cloth filter shake the frame bottom quickly several times Moreover occasionally wash the cloth filters in soapy water rinse and dry thoroughly in the shade before use Never wash filters in a washi
Download Pdf Manuals
Related Search