Home

Mobile FliteDeck User Guide

1. Jeppesen Mobile FliteDeck User Guide 19 setting Up and Editing Your Flight Working with Saved Flights Y JEPPESEN Load a Saved Flight To load a saved flight Open the Flight Info drawer Tap the Saved Flights button at the bottom of the drawer l 2 3 Tap a saved flight from the list to expand its view 4 Tap the Load button Mobile FliteDeck loads the flight information and the flight becomes the active flight 5 Tap the Flight Info drawer tab to close the drawer Sort Saved Flights To sort saved flights 1 Open the Flight Info drawer Sort by 2 Tap the Saved Flights button at the bottom of the drawer 3 Tap either Sort by Date Date Updated or Sort by Name Flights By Name to select a sorting option Duplicate a Saved Flight You might need to consider or plan for two different scenarios for the same airport pair To do so first create the flight select your charts and save the flight Then duplicate the saved flight and make any changes to the duplicated flight To duplicate a saved flight 1 Open the Flight Info drawer 2 Tap the Saved Flights button at the bottom of the drawer 3 Tap Edit and then tap the check mark circle next to the flight that you want to duplicate Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 20 Setting Up and Editing Your Flight Y JEPPESEN Sharing Flight Information 4 Tap the Dup
2. Ll tap that chart type button again the last viewed selected chart from that chart type appears If no charts are selected within a chart type the chart list opens AHA PES Y Aey EL Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 40 Setting Up and Editing Your Flight Ss JEPPESEN Selecting Terminal Charts Navigate Between Selected Charts Each selected terminal chart is represented by a pagination dot on gom o S the Selected Charts bar located under the chart display wamom com BRER Ji To navigate between selected charts you can Device Pad B oe a e itt marwa A ED e Use a two finger swipe as though you are turning the pages of a book e Tap outside on the left or right side of the selected charts bar to move to the previous or next chart MA Mal oe i i f f 4 i i STAR APP TAXI o o o e Tap the chart type button to jump across multiple selected charts Switch Between Route Airports To switch between airports associated with the active flight including any alternate airports 1 Tap the Airports button Mobile FliteDeck displays all airports associated with the active flight 2 Tap an airport from the route airport list to access its terminal charts October 2015 Jeppesen Mobile FliteDeck User Guide Copyright O 2015 Jeppesen All rights reserved 41 setting Up and Editing Your Flight Displaying Enroute Themes Y JEPP
3. Chart Revision Text To view effective dates and access the option to switch between available chart versions while viewing a chart 1 Tap the Chart Revision tag port Info Mobile FliteDeck expands the Chart Revision tag and indicates the effective date of the chart being used 2 Tap the Switch button KCOS Mobile FliteDeck displays the Airport Revision Selector and prompts you to choose the effectivity date of the chart that you want to view Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 76 Performing Data Updates Y JEPPESEN Viewing Mid Cycle Chart Revisions Performing Data Updates Mobile FliteDeck provides a simple way to verify the status of your enroute and terminal chart data and any downloaded manuals At any time you can tap the Settings button from the Mobile FliteDeck toolbar and then tap Updates to view the status of your enroute and terminal chart data and any selected manuals Data is identified as Current or Not Current Data is Not Current Enui sia og n Terrinal Charts Maruals October 2015 Jeppesen Mobile FliteDeck User Guide Copyright O 2015 Jeppesen All rights reserved 77 Performing Data Updates Perform an Update JEPPESEN Perform an Update Whenever data updates are available a badge appears on the Mobile FliteDeck toolbar Settings button The badge indicates the number of updates available Se
4. Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 15 Setting Up and Editing Your Flight Set Up Your Route JEPPESEN To render SID or STAR transition points on the enroute map use this format e SID rwy SID transition e STAR transition STAR rwy For example to enter the EPKEE 3 RNAV departure out of KDEN departing on Runway 08 via the GATTR enroute transition you would enter 08 EPKEE3 GATTR KDEN zw KBNA New Flight Save Share KDEN Lx 08 EPKEE3 GATTR O KBNA Lo Enter Alternate Airports NOTE Mobile FliteDeck depicts SID and STAR transition points on the enroute map to support situational awareness Always brief the SID or STAR terminal procedure Jeppesen Mobile FliteDeck User Guide October 2015 16 Copyright O 2015 Jeppesen All rights reserved F JEPPESEN Setting Up and Editing Your Flight Set Up Your Route Searching for Enroute Objects Mobile FliteDeck searches across all enroute themes when you perform a search For example when you are viewing the High IFR theme and perform a search the search results will include objects from all themes High IFR Low IFR and VFR Search for Enroute Objects To search for objects on the enroute map 1 Tap the Search button 2 Enter the city name object name or airport ICAO or IATA identifier in the search field that appears on the toolbar 3 Tap the Search Results button or tap Done
5. Jeppesen Mobile FliteDeck User Guide October 2015 6 Copyright O 2015 Jeppesen All rights reserved Getting Started JEPPESEN JeppFD Global Settings Arpt Diagram 10 9 Speed Threshold The setting for the Arpt Diagram 10 9 Speed Threshold is the speed at which if enabled and in flight the automatic switch to a taxi diagram occurs For more information see Automatic Switch to the Airport Diagram Upon Landing visplay vrm ineme Display Ownship on Approach Charts 88 Display Ownship on Taxi Charts Default Chart Zoom Level Arpt Diagram 10 8 Speed Threshold To optimize this setting for your aircraft adjust the threshold speed Values range from 30 to 80 knots The default is 40 knots NOTE A GPS signal is required for the automatic switch to a taxi diagram The minimum GPS accuracy requirement to automatically switch to a taxi diagram and display ownship on a taxi chart is 17 meters October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 7 Getting Started JeppFD Global Settings Display Enroute Wx Display METAR TAF Temperature Unit Default METAR TAF Format O O Y JEPPESEN Weather These settings control your view of weather information NOTE Mobile FliteDeck displays an amber enroute weather selection boundary on the enroute map to indicate the extent of your weather coverage area Display Enroute Wx To display weather data overlaid on the enro
6. action by doing one of the following e To add the waypoint to your current route tap Add to Route e To add the waypoint to the current route and remove all points between your aircraft position and the waypoint tap Direct To Mobile FliteDeck displays the user waypoint on the map in the location based on the radial DME that you entered in the Name field NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is set to ON and the minimum GPS accuracy requirement is met Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 36 setting Up and Editing Your Flight JEPPESEN Editing Your Route Create a Named User Waypoint To create a named user waypoint by interacting with the map 1 Touch hold and release the enroute map at the location Fr where you want to insert a waypoint Mobile FliteDeck displays the New Waypoint popover 2 In the Name field enter a name You can include any characters available on the keyboard in the waypoint name including spaces The maximum length of a user waypoint name cannot exceed the area E provided in the popover a Add To Route Direct To 3 To enter comments tap in the Comments field 4 Complete the action by doing one of the following e To add the waypoint to your current route tap Add to Route e To add the waypoint to the current route and remove all points between your air
7. e Green Current data is in use e Amber Current data is in use and an update is available e Red Data is not current and an update is available When two sets of data are available the bar color code meanings are e Light green Current data is in use e Dark green Data is available but not in use e Light red Data is not current e Dark red Next update has not been downloaded Switch Between Two Available Enroute Database Versions To manually change enroute database versions when more than one version of the database is available 1 Tap the Settings button 2 Tap the Updates button 3 Tap the Switch Back to Data Expiring date to view that database 4 To return to the current database tap Switch to Data Effective date Enroute 20 Days Until Next Update Today Nov 14 Jeppesen Mobile FliteDeck User Guide 79 Performing Data Updates Perform an Unscheduled Update JEPPESEN Perform an Unscheduled Update Mobile FliteDeck enables you to complete an unscheduled update for any data type that is terminal chart enroute or manual updates An unscheduled or off cycle update is an unplanned change For example an unscheduled update can occur due to an error on an existing chart or in the case of company manuals when a publication is not on an update cycle Unscheduled updates are initiated by your company or by Jeppesen on a case by case basis Notification of an unscheduled upd
8. flight plan route without loading it 1 Open the Flight Info drawer 2 Tap the Flight Plans button 3 Enter the call sign for the aircraft for example NJ104F or CMB123 4 Tap DONE on the keyboard Mobile FliteDeck displays a list of future and past flight plans for that call sign sorted by ETD newest to oldest 5 Tap a flight plan to select it 6 Tap the Save button next to the flight plan Mobile FliteDeck updates the list of saved flights with the flight plan route Display and Load an ATC Cleared Route This section describes how you might enter your route by loading a cleared ATC route With Mobile FliteDeck you can become aware of current clearing trends You can view cleared routes for the past 24 hours between i oy Pu a city pair and you can load a cleared route into the Flight Info y drawer Clearances are grouped by route and are available for any flight within into or out of the United States NOTE To display ATC clearances ensure that Display ATC Clearances is set to ON in JeppFD global settings and an Internet connection is established Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 28 Setting Up and Editing Your Flight Sw JEPPESEN Display and Load an ATC Cleared Route KSJ G 1677 NM l KLAX New Flight Save Share 1 KSJC O N39 31 6 W105 14 9 AVE SADDE6 2 KLAX Enter Alternate Airports Number of times ATC Clearances
9. name from the results list to select it 5 Tap a chart type button and scroll through the list of charts for that airport s chart type Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 70 Setting Up and Editing Your Flight Y JEPPESEN Viewing Your Flight with Respect to the Terminal Air Structure Viewing Your Flight with Respect to the Terminal Air Structure NOTE Displaying ownship position on the Taxi chart is designed to assist flight crews in orienting themselves on the airport surface and improving pilot positional awareness during taxi operations This function is not to be used as the basis for ground maneuvering and is limited to ground operations Operators may require additional authorizations to use this function Display Ownship on Approach Charts Mobile FliteDeck displays ownship position on approach charts when these conditions are met e Display Ownship on Approach Charts in JeppFD global settings is set to ON e The minimum required GPS accuracy to display ownship on approach charts is met NOTE The minimum required GPS accuracy to display ownship on approach charts is 50 meters Temporarily Disable Ownship on Approach Charts There may be situations when you want to temporarily disable the ownship from appearing on the approach chart To do so tap the GPS Status button while viewing the approach chart and switch Ownship on Approach to OFF Octo
10. on the keyboard to display the search results Os LOGAN INTL KBOS The number of search results appears on the Search Results button L A Search results highlight in the viewable area on the enroute map and display in a list of results available from the Search Results button APT FIX re KBVY MILTT BO UYNDY Terminal NDB lt BED sia rll LYNDY 14 2 NM From Chart Center ns C382 LQ Airport 19 4 NM Fro Kj BOSTON BOS VORDME 3 19 7 NM From Chart Center LYNDY LQ Enroute NDB 24 9 NM From Chart Center 4 Select a search result to view the details popover October 2015 Copyright 2015 Jeppesen All rights reserved Jeppesen Mobile FliteDeck User Guide 17 Setting Up and Editing Your Flight Set Up Your Route Y JEPPESEN 5 Review more information about the object by tapping any flyout gt from the object popover or you can add the object to your route Refine Enroute Search Results To refine enroute search results tap the APT or FIX button at the top of the search results list For example to view only airports in the search results tap APT To view only fixes in the search results tap FIX About Search Results Mobile FliteDeck search results have the following characteristics e They are not limited by the map view You can pan the map or zoom out to see search results outside the current map view e They appear in the search results list and are
11. ordered by distance either from the map center or from your aircraft position You can scroll the list to see the name and distance of objects that are farther away e They are returned across enroute themes High IFR Low IFR and VER e They are not limited to objects filtered on the map Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 18 Y JEPPESEN setting Up and Editing Your Flight Working with Saved Flights Working with Saved Flights light Dave October 2015 Copyright O 2015 Jeppesen All rights reserved This section describes how you might enter your route by working with saved flights Save the Active Flight To save an active flight with the flight loaded in the Flight Info drawer tap the Save button at the top of the Flight Info drawer Each time that you save a flight Mobile FliteDeck adds it to the Saved Flights list NOTE A saved flight includes the route description as well as any selected terminal charts that are associated with the flight View a Saved Flight To view saved flights 1 Open the Flight Info drawer 2 Tap the Saved Flights button at the bottom of the drawer 3 Tap a saved flight from the list of saved flights to expand its view Mobile FliteDeck displays route information date last saved and any selected terminal charts associated with the flight 4 Tap the saved flight again to collapse the view
12. the object is E showing on the map Gray button indicates the object is jari available but Bray l button indicates not showing wien the object is not on the map available NOTE When you tap a map object button for an object that is not visible at the current zoom scale or enroute theme the filters menu is still available for that object type October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 47 setting Up and Editing Your Flight Displaying Enroute Themes Y JEPPESEN Enroute Object Filters The filters available for each enroute map object are as follows e Airports You can set a minimum runway length for airports that appear on the map See Filter Airports by Airports Runway Length for more information Y ou can also customize your view to show airports at all zoom scales See Show at All Scales Airports Waypoints and Navaids for more information Airways Waypoints In the VFR theme you can specify whether to show or hide Navaids heliports seaports and private airports e Airways No additional filters are available for airways in Airspace either of the IFR themes In the VFR theme you can show or hide low altitude airways and other routes Other routes include VFR routes and military training routes Terrain Cultural Information e Waypoints You can show waypoints at all zoom scales See Show at All Scales Airports Way
13. the Settings popover to dismiss it Switch to the Airport Diagram Upon Landing To direct Mobile FliteDeck to automatically switch to the airport diagram upon landing 1 Tap the Settings button 2 Ensure that Show Taxi on Landing is switched to ON 3 Tap away from the Settings popover to dismiss it NOTE The switch to the airport diagram occurs when your aircraft is moving no faster than the speed specified in the Arpt Diagram 10 9 Speed Threshold in JeppFD global settings Lock the Display To lock and unlock the Mobile FliteDeck display tap the Display Lock button on the toolbar Locking the display prevents you from accidentally panning or zooming away from the current display When the display is locked the Display Lock button is highlighted and you cannot access any other Mobile FliteDeck button Jeppesen Mobile FliteDeck User Guide October 2015 86 Copyright 2015 Jeppesen All rights reserved
14. your iPad to view manuals To view a manual 1 Tap the Manuals button on the Mobile FliteDeck toolbar 2 Select the manual that you want to view 3 Select the PDF reader app of your choice October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 81 Using the Mobile FliteDeck Toolbar View Manuals Y JEPPESEN You can use a four finger swipe to move between the PDF reader app and the Mobile FliteDeck app NOTE In addition to Jeppesen Standard Airway Manuals your company documents might also be available from the Manuals button View Change Notices Change notices are available based on your current view For example in the Enroute view change notices are displayed by region In the Terminal Charts view change notices are displayed for the selected airport To view change notices 1 Tap the Manuals button 2 Tap the Notices button at the bottom of the Manuals popover e From the Terminal Charts view any available notices for the selected airport appear in the popover e From the Enroute view select the region for which you want to view change notices and then select the PDF reader app of your choice to view the notices NOTE You can access the most recent change notices by tapping the jeppesen com link at the bottom of the Change Notices popover On Demand Change Notices On demand change notices contain the same content that both NavData and Chart
15. 25 Jun Airport Effectivity Badge Badge KBC LOGAN INTL l 7 on h Airport Effectivity Text Airport 2 Destination Button To view effective dates and access the option to switch between available chart versions for the airport 1 Tap the route Airports button Mobile FliteDeck displays the list of airports for the active flight and airport effectivity text and badges if applicable 2 Tap the Airport Effectivity badge Mobile FliteDeck displays the Airport Revision Selector and prompts you to choose the effectivity date of the charts Destinatio that you want to view Which KBOS charts do you want to use Effective 25 JUN a Effective 26 JUN 3 Complete the action by doing one of the following e Tap the date to use charts with a different effectivity date and then tap Done e Tap Cancel to dismiss the Airport Revision Selector and continue viewing the current chart version October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 75 setting Up and Editing Your Flight Viewing Mid Cycle Chart Revisions JEPPESEN Switch Between Available Chart Versions on a Chart by Chart Basis When you view a chart with more than one version available Mobile FliteDeck also displays chart revision text in the chart list and a chart revision tag on the chart itself TAXI CHARTS Chart Construction Temp yig Revision Tag Closed ar EA w
16. 5 Jeppesen All rights reserved 66 JEPPESEN 12002 Gel Llar Mura OGOOZ 04 Mar H Pilar 155 Y ed Fae OO Forecast Icing 1 000 6 NEXRAD October 2015 setting Up and Editing Your Flight Displaying Enroute Weather Icing Turbulence and Winds Aloft Forecasts To viewicing turbulence or winds aloft forecasts l 2 3 A Tap the Weather button Switch Weather to ON Tap Icing Turbulence or Winds Aloft Tap the altitude at which you want to view the forecast weather Tap away from the Weather popover to dismiss it and view the weather overlaid on the map NOTE You can display up to four weather forecast images To change to a different forecast period after you select the weather type tap the Forecast button and then select a different forecast time RADAR To view NEXRAD echo tops or lightning l ape EA Tap the Weather button Switch Weather to ON Tap the RADAR button Tap the type of RADAR weather that you want to view Tap away from the Weather popover to dismiss it and view the weather overlaid on the map Tap the Play button to cycle through the series of multiple images NOTE After you tap Play the animation continues to cycle through the images until you either tap the Pause button or deselect the weather type to stop viewing it Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 67 Setting Up and Editing You
17. 72 Copyright O 2015 Jeppesen All rights reserved setting Up and Editing Your Flight S JEPPESEN Displaying Terminal Weather Automatic Switch to the Airport Diagram Upon Landing Mobile FliteDeck automatically switches to the airport diagram upon landing when these conditions are met e Show Taxi On Landing is set to ON from the Settings button on the Mobile FliteDeck toolbar e Your aircraft is moving no faster than the speed specified in the Arpt Diagram 10 9 Speed Threshold field in JeppFD global settings Displaying Terminal Weather i i To view METAR or TAF weather data BKN150 FMOA BKNOSO OVC1 e Tap the Weather button from the Terminal Charts view A Weather popover for the selected airport opens NOTE Weather data is provided by Jeppesen Jeppesen receives source data primarily from the National Weather Service and the UK Met Office as well as other private weather providers that Jeppesen utilizes in creating aviation specific weather information If the weather data is expired a weather warning appears in red in the same location as the weather age METAR and TAF updates occur separately To manually update the weather data e Tap the Reload button at the bottom of the Weather popover e Tap away from the popover to dismiss it NOTE You can also view METAR TAF weather data from the enroute view from an Airport popover October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 J
18. Change Notices contain except that the on demand change notices are updated on a daily basis You can also search the on demand change notices for a single airport or FIR Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 82 Using the Mobile FliteDeck Toolbar S JEPPESEN Adjust Brightness and Night Theme To access on demand change notices 1 Tap the Manuals button 2 Tap the Notices button at the bottom of the Manuals popover 3 Tap View More Recent Change Notices at jeppesen com at the bottom of the popover A browser window opens e Select your desired output format Jeppesen or ICAO e Select Airports or FIRs Tap in the Search field and enter the airport or FIR boundary name e Tap the Search button NOTE Always check NOTAMSs and all other pertinent information prior to flight You can use a four finger swipe to navigate between the browser and the Mobile FliteDeck app Adjust Brightness and Night Theme The Brightness button enables you to quickly adjust the display brightness You can also switch between Day and Night theme Brightness The Brightness button appears on the toolbar from all views and display orientations NOTE The Brightness button controls the brightness setting for the whole iPad until the iPad goes into sleep mode or is restarted at which point the previous iPad brightness setting will take effect October 2015 Jeppese
19. ESEN Viewing Enroute Map Information Mobile FliteDeck enables you to increase situational awareness by viewing your flight with respect to the enroute air structure Displaying Enroute Themes Enroute Themes High IFR Low IFR _ VFR Enroute Themes High IFR Low IFR VFR High IFR Low IFR and VFR Themes Mobile FliteDeck provides three enroute themes available from within the Enroute view e High IFR provides aeronautical information for enroute instrument navigation facilitating operations generally above FL180 e Low IFR provides aeronautical information for enroute instrument navigation facilitating operations generally below FL180 e VFR provides aeronautical information for conducting flight under visual conditions in the United States and parts of Europe For more information see VFR Aeronautical Data Coverage Areas as described on page 43 NOTE To display the VFR enroute theme ensure that Display VFR Theme is set to ON in JeppFD global settings Switch Between Enroute Themes To switch between enroute themes 1 From the Enroute view tap the Enroute Theme button 2 Tap your preferred enroute theme When you switch between enroute themes and a route object is not included in the theme that you switch to Mobile FliteDeck displays that object as a standard waypoint on the enroute map Jeppesen Mobile FliteDeck User Guide October 2015 42 Copyright 2015 Jeppesen All rights rese
20. Enroute Map 0 00 cen 62 View Present OSION picor sata da dee bs gue eb ee eet 62 View North Upor Track OD sisas ara e abs ve eRe 63 View Distance Calculations ccs axicada aa bavi dada darcd eens 63 Determine Distance with the Offset Indicator 00 0c cee 64 Displaying Enroute Weather 0 00 eens 64 Accessing Terminal Chart Information ccc cece cree reer eee 68 Working with Terminal Charts 0 0 eee eens 68 Highlight a Chart og acpi eee eden hha nn dad ee bade cho im de dr ah de died 69 ROME CHA a nnd od pats cbse Gogh seb once ia 69 Print a Terminal CGI cu ve ich tne So th each ch ae Fn ede Te Ba ae fg oh each dea Ree ose ates 69 Access Charts for Airports Not Associated with an Active Flight 70 Viewing Your Flight with Respect to the Terminal Air Structure 71 Display Ownship on Approach Charts 0 000 een 71 Display Ownship on Taxi Charts 0 000000 0 cece eens 72 Automatic Switch to the Airport Diagram Upon Landing 000 00 ces 73 Displaying Terminal Weather i020460 4 0042464 roce o a sdvan 73 Viewing Mid Cycle Chart Revisions ooooooooooooo eee eens 74 Switch Between Available Chart Versions from the Airports List o o o o 74 Switch Between Available Chart Versions on a Chart by Chart Basis 76 Performing Data Updates 6 i6du60d cden se bees tee rar se ew ind e000 bee sendin 77 Perono Updale 24 9 a0 cage ndt ss ones erro o
21. JeppFD Global Settings visplay vrm ineme Display Ownship on Approach Charts Display Ownship on Taxi Charts Default Chart Zoom Level Arpt Diagram 10 9 Speed Threshold O O Y JEPPESEN Terminal Charts View Adjust these settings to customize your Terminal Charts view NOTE Displaying ownship position on terminal charts is designed to assist flight crews in orienting themselves on the airport surface and improving pilot positional awareness during taxi operations This functionality is not to be used as the basis for navigation Operators might require additional authorizations to use these functions Display Ownship on Approach Charts To display ownship position on the approach chart ensure that Display Ownship on Approach Charts is set to ON This setting also enables the display of the off map indicator on approach charts This setting is set to ON by default NOTE The minimum GPS accuracy requirement to display ownship on an approach chart is 50 meters Display Ownship on Taxi Charts To display ownship position on the taxi chart ensure Display Ownship on Taxi Charts is set to ON This setting is set to ON by default NOTE The minimum GPS accuracy requirement to display ownship on a taxi chart is 17 meters Default Chart Zoom Level The Default Chart Zoom Level is the zoom level preference you set for viewing terminal charts Options are Fit Full Chart or Fit to Width Fit Full Chart 1s the default value
22. Jeppesen Mobile FliteDeck User Guide Version 2 7 BOEING COMPANY Jeppesen Mobile FliteDeck User Guide Jeppesen 55 Inverness Drive East Englewood Colorado 80112 5498 This document supports version 2 7 of Jeppesen Mobile FliteDeck The minimum operating system requirement for Jeppesen Mobile FliteDeck 2 7 is iOS 8 4 1 October 2015 Copyright 2015 Jeppesen All rights reserved Contents Introduction sua daba parda 1 About Ths Document ws a AA as l Intended Audience ADA A A AS ESA A l Additonal REFCTON CCS paesa erinan ANA Ao EO l Technical Suppo iaeaea a a ds 2 Release SUMMALy 226340444 ai ee Soha A E eee tad 2 Release Identification Information 0 0 0 eee nes 2 Getting Started vaa oi wt 3 Basic 1 Pag Gesvules not aun uw see bbe Gai ads Bolt ein Pet ae dis 3 JEppED Global SENES vicios ii Obs A AAA AA 4 CCOO Ut NS AS A SAI E A Ee AE E AAA IEA 4 PU UELI A O Bees 4 OUI AS asane a Soin Bib S dn Gh Nth ea eee be heeds BG torah aE 5 Toaminal CHOMIS VACW SADA AE aii 6 ATA ARA A A II O aust mien ed 7 ACCUTANE E A Ee AAA id 9 Support Information and Settings iii A A Eee th da 10 Setting Up and Editing Your Flight oooooooooooooooooo oo 11 OVGIVIEW ar ii da 11 Fon INO LOW SA A AAA A A A ae RE Ne a 11 A A E tee 12 Enroute View and Terminal Charts View 0 000 cc eens 12 pet Up YOur ROUCs 50 645 a nes eee eae Ota Reet hee ees 13 Create NCW TMCIE aii wets a Bak ache ete IT EE EO SS eh 13 Ener
23. Kowe FONS a theta O be rent irks athe ulin t 14 ROUTE POULT Orms lt lt Gah htt acd Bod EE ack WEE ey A E AA eS Bir eA 15 Adding SIDS ONO STARS gt dr it db iras 15 Searchino tor Entoute ODIECIS Caida 17 Search Jor Enroute ODICCTS ad riire an E E EEE adosada 17 Contents Working with Saved Flights Sharing Flight Information Selecting Terminal Charts Refine Enroute Search Results Save the Active Flight View a Saved Flight Load a Saved Flight Sort Saved Flights Duplicate a Saved Flight Delete a Saved Flight Share Flight Information Device What is Shared Between iPads What is Not Shared Between Pads Share a Route App to App Share a Route to Your Avionics System o o oooooonnonnoo neces Load a Route from Your Avionics System Importing a Route from a Flight Planning System Retrieve Flight Plans and Load a Route Save a Flight Plan Route Without Loading It Display and Load an ATC Cleared Route Display ATC Clearances Load an ATC Cleared Route Save an ATC Cleared Route Without Loading lt Editing Your Route Edit Your Route in the Flight Info Drawer Edit Your Route by Interacting with the Map Edit Your Route with Rubber Band Routing Create User Waypoints Types of User Waypoints Create a Latitude Longitude User Waypoint Create a Radial DME User Waypoint ooo Create a Named User Waypoint Edit a User Waypoint Remove a User Waypoint from Your Route 000 nes Delete a
24. Map setting in JeppFD global settings is set to ON and the minimum GPS accuracy requirement is met Remove a User Waypoint from Your Route To remove a temporary user waypoint from your route 1 Touch hold and release the user waypoint that you want to remove i en VOR Rada OME Raf FOR 156 026 LavLong N39 16 1 W104 29 7 Mobile FliteDeck displays the Edit Waypoint popover y Add To Route Direct To 2 Tap the Remove From Route button and then confirm the removal Remove From Route Mobile FliteDeck removes the waypoint from your route Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 38 F JEPPESEN Setting Up and Editing Your Flight Selecting Terminal Charts Delete a User Waypoint Any user waypoint that is named or first created and not added to Edit Waypoint Delete Waypoint l a route is considered permanent To delete a permanent user waypoint Touch hold and release the user waypoint that you want to delete Mobile FliteDeck displays the Edit Waypoint popover Tap the Delete trashcan button at the top of the popover and then confirm the deletion Mobile FliteDeck deletes the waypoint from your route and from the enroute map Selecting Terminal Charts At any point after you enter origin and destination airports you October 2015 can preview and select terminal charts for your flight including charts for alternate
25. TIONS ON Y ROUTES BETWEEN KZNY New York Oceanic FIR UIR COMMON PROCEDURES FOR RADIO COMMUNICATION FAILL KZNY New York Oceanic FIR UIR CONTINGENCY SITUATIONS AFFECTING ATM PROVISION October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 61 Setting Up and Editing Your Flight Viewing Your Flight with Respect to the Enroute Air Structure Y JEPPESEN Viewing Your Flight with Respect to the Enroute Air Structure NOTE Centering the map over the ownship location and displaying ownship location on the enroute map are both designed to improve situational awareness during enroute flight This functionality is not to be used as the basis for navigation Operators may require additional authorizations to use these functions Displaying Ownship on the Enroute Map Y our current aircraft position is available on the enroute map when e Moving Map and Display Ownship in JeppFD global settings are set to ON e The minimum GPS accuracy requirement is met NOTE The minimum required GPS accuracy to display ownship on the enroute map is 200 meters View Present Position To recenter the map over your aircraft position after you have panned away tap the Present Position button Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 62 F JEPPESEN October 2015 Setting Up and Editing Your Flight Viewing Y
26. Time en an AR route and was date of 1429Z KSJC KLAX issued latest 15 Apr TECKY1 EBAYE AVE SADDE6 for city ETD pair in last 24 hours Time last refreshed More provided to Retrieve latest expand the view if clearances needed Display ATC Clearances To display ATC clearances after you have entered origin and destination airports in the Flight Info drawer 1 Open the Flight Info Drawer 2 Tap the ATC Clearances button Pon ee Mobile FliteDeck displays clearances that have occurred for that city pair in the last 24 hours r KSJC KLAX The time and date that the list was last updated appears at the bottom of the list 3 Tap Refresh to retrieve the latest clearances Load an ATC Cleared Route To load an ATC cleared route as the active flight 1 Open the Flight Info Drawer 2 Tap the ATC Clearances button October 2015 Jeppesen Mobile FliteDeck User Guide Copyright O 2015 Jeppesen All rights reserved 29 setting Up and Editing Your Flight Display and Load an ATC Cleared Route 30 Y JEPPESEN From the list of displayed clearances tap the desired clearance to select it Tap the Load button next to the clearance Mobile FliteDeck loads the route as the active flight NOTE Loading an ATC cleared route is different than loading a saved flight because it does not change alternate airports or terminal chart selections Save an ATC Cleared Route Without Loading It Saving an ATC cl
27. User Waypoint Chart Types Select Terminal Charts for the Active Flight 00 00000 ees Navigate Between Selected Charts Switch Between Route Airports Viewing Enroute Map Information Displaying Enroute Themes High IFR Low IFR and VFR Themes Switch Between Enroute Themes VFR Aeronautical Data Coverage Areas Filtering the Enroute View Default Filtering of Map Objects Show and Hide Enroute Map Objects Jeppesen Mobile FliteDeck User Guide Y JEPPESEN to DEVICE ca Rs October 2015 Copyright 2015 Jeppesen All rights reserved Contents Y JEPPESEN Customized Filtering of Enroute Objects 0 nee 46 Show at All Scales Airports Waypoints and Navaids o oooooooommmmmm 49 Filter Airports by Runway Length 1 0000 cece eens 50 Show Only Oceanic Entry and Exit Points oo oooooooooooooomoooooooo o 50 Viewing Object Details on the Map eens 51 ADOS o es bs ia tos aa a ia ias a 51 A o II 2 ee ee 8 ee ee 53 WIND se bes been ben ee bene ee ee eee ee Bae oes Ge Rage Bee oe 54 NOVQIOS 35 44 bese he PI 56 a Ganvog eevee nd eens E Uae Bee eee n 57 CAS B AIPAC isso iek SENE ett Soh pc a eo SNe has BG eS 58 cage ete eee eT CTE TTT TE TR See eee ee eee Le ee ee eee E eee eee 59 Bi AA 59 AGcessing NOUS auce enn admes eo bon eae es ew eeeres amp ee ede ese h oon bee se 60 Viewing Your Flight with Respect to the Enroute Air Structure 62 Displaying Ownship on the
28. a terminal chart tap the Highlight button In highlight mode your finger acts as a highlighter on the chart Tap the Highlight button again to exit highlight mode or tap one of the following buttons e Undo button to remove the last highlight e Clear All button to clear all highlights NOTE Highlights persist on the chart until you remove the highlights or update the chart Highlights do not accompany charts that are shared between devices Rotate a Chart To rotate a chart tap the Rotate button Each time that you tap the Rotate button the chart turns 90 degrees clockwise NOTE The rotated view does not accompany a chart that is shared between devices Print a Terminal Chart To print the displayed chart to an AirPrint enabled printer 1 Tap the Settings button on th Mobile FliteDeck toolbar 2 Tap Print 3 Select the printer and the number of copies 4 Tap the Print button NOTE Charts print out one per page and cannot be re formatted Jeppesen Mobile FliteDeck User Guide 69 Setting Up and Editing Your Flight Working with Terminal Charts Y JEPPESEN Access Charts for Airports Not Associated with an Active Flight To access terminal charts for an airport not associated with the active flight 1 Tap the Airports button 2 Tap the All Airports button at the bottom of the Airports popover 3 Tap in the Search field and enter the city name or airport ICAO or IATA identifier 4 Tap the airport
29. airports Chart Types From the Terminal Charts view the available chart type are REF Reference charts that are nonprocedural sorted alphabetically by title STAR Standard Terminal Arrival Route Arrival charts sorted alphabetically by title APP Approach charts grouped by runway and sorted by index number TAXI Taxi charts sorted by index number Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 39 Setting Up and Editing Your Flight Selecting Terminal Charts JEPPESEN e SID Standard Instrument Departure Departure charts sorted alphabetically by title NOTE By default the first time that you tap the Terminal Charts view button from an active flight Mobile FliteDeck displays the taxi chart for the origin airport Select Terminal Charts for the Active Flight To preview and select charts from any chart type associated with en the active flight gt el 1 Tap an available chart type button REF STAR APP _ TAXI or SID Aircraft Mobile FliteDeck highlights the selected chart type and displays a list of those charts e To preview a chart tap the chart title e To select a chart tap the circle next to the chart title Mobile FliteDeck places a check mark next to the selected Ai chart and adds the chart to the Selected Charts bar for the l active flight LSO LOS Rwy IL cd NOTE After you select a chart from within a chart type whenever you
30. al chart coverage area of the selected terminal chart to successfully share the selected charts October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 23 Setting Up and Editing Your Flight Sharing Flight Information Y JEPPESEN What is Not Shared Between Pads When you share Mobile FliteDeck flight information from one iPad to another the following is not shared e Highlights on terminal charts e Rotated view of terminal charts e Comments associated with user waypoints e Customized enroute map object filter settings Share a Route App to App To share a route from a flight planning app on your iPad to the Mobile FliteDeck app 1 Load the route in the flight planning app 2 Select the option to share with Mobile FliteDeck Mobile FliteDeck opens and displays a notification that an app would like to share a flight and displays these options Load Save or Decline 3 Complete the procedure by doing one of the following from the Mobile FliteDeck app e Tap Load to load the route as the active flight e Tap Save to add the route to the list of Mobile FliteDeck saved flights e Tap Decline to reject the request Share a Route to Your Avionics System NOTE To share a route between Mobile FliteDeck and your avionics system ensure that Services gt Allow Avionics Connection is set to ON in JeppFD global settings and that your iPad is connected to the a
31. ate will come from an external communication Whenever you receive notice that there is an unscheduled update you can go into Mobile FliteDeck to perform the update To perform an unscheduled update 1 Tap the Settings button 2 Tap Updates H Updates 3 Mobile FliteDeck displays an alert if an unscheduled update Help is available JeppFD has detected an unscheduled update minal Charts Tod 4 To perform the unscheduled update tap OK 5 Tap the Update button 6 When updates are complete tap the X at the top of the Updates screen to dismiss 1t Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 80 Using the Mobile FliteDeck Toolbar Y JEPPESEN View Manuals Using the Mobile FliteDeck Toolbar 11 54 ADA 25 mm RNAV GPS Y Rwy 8 2 oo KOEN ESLE JEPPESEN DENVER COL o RNAV GPS Y Rwy aa 12005 Minisrum Ala sit Ebro 5434 A TAN DALH TOOD icici 5554 3000 Bey d 354 ME APO Climb to 10000 direct OLDAE and on track D41 l to WITME and hold Manuals GPS Status settings Display and with with Lock Change Accuracy Updates Notices Requirement Badge Not Met Badge Brightness View Manuals The Manuals button provides access to both manuals and change notices As with all buttons on the toolbar the Manuals button is available from all views and display orientations NOTE You must have a PDF reader app installed on
32. ber 2015 Jeppesen Mobile FliteDeck User Guide Copyright O 2015 Jeppesen All rights reserved 71 Setting Up and Editing Your Flight Viewing Your Flight with Respect to the Terminal Air Structure Y JEPPESEN letting d For unconpentate bolow 23 C 9 F or above aal sulhorired Filol cor PORWAY uA e 00D e 2 Ua View the Off Map Indicator on Approach Charts Mobile FliteDeck provides an off map indicator as a visual cue as to the direction from which your aircraft is approaching when these conditions are met e Display Ownship on Approach Charts in JeppFD global settings is set to ON e Your aircraft is within 10NM of the approach chart boundary e The minimum required GPS accuracy to display ownship on approach charts is met NOTE The minimum required GPS accuracy to display ownship on approach charts is 50 meters Display Ownship on Taxi Charts Mobile FliteDeck displays ownship on the airport diagram when these conditions are met e Display Ownship on Taxi Charts in JeppFD global settings is set to ON e Your aircraft is moving no faster than the speed specified in the Arpt Diagram 10 9 Speed Threshold in JeppFD global settings The speed threshold is 40 knots by default e The minimum required GPS accuracy to display ownship on taxi charts 1s met NOTE The minimum required GPS accuracy to display ownship on taxi charts is 17 meters Jeppesen Mobile FliteDeck User Guide October 2015
33. craft position and the waypoint tap Direct To NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is set to ON and the minimum GPS accuracy requirement is met e To create a named user waypoint without adding it to your route tap Done at the top of the New Waypoint popover Mobile FliteDeck displays the name for the newly created user waypoint on the map October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 37 Setting Up and Editing Your Flight Editing Your Route Y JEPPESEN Edit a User Waypoint To edit a user waypoint 1 Touch hold and release the user waypoint Fa 1 LX Mobile FliteDeck displays the Waypoint popover c Lat Long N35 22 5 W120 14 0 2 Complete the action by doing one of the following e To edit the name tap in the Name field and use the keyboard to edit the name To complete the edit tap Done at the top of the Waypoint popover 4 Add To Route Direct To e To edit comments tap in the Comments field and use the keyboard to edit comments To complete the edit tap Done at the top of the Waypoint popover e To add the user waypoint to your current route if it is not already added tap Add to Route e To add the user waypoint to your current route and remove all points between your aircraft position and the waypoint tap Direct To NOTE The Direct To option is available when the Moving
34. d and outbound bearings mileage between navaids any altitude requirements access to cruise tables and any restrictions Mobile FliteDeck displays distances between VORs changeover points and signal gaps on an airway when zoomed in to a relevant zoom level and airways are set to show or when an airway is part of the route description VFR Routes VER routes displayed in the VFR enroute theme include e Advisory routes e VER flyways e Military low flying routes e Military training routes e VFR transition routes Europe e VER transition routes USA Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 93 setting Up and Editing Your Flight Viewing Object Details on the Map JEPPESEN Waypoints To view details for a waypoint touch hold and release a Sener re waypoint The waypoint popover displays the following information a NOBAR Enroute Fix Osis HY 4 3347 2 E 151444 AA 127E s 7 cer Enroute fix or waypoint name 8 Ml rcaTorowe rect To e Latitude and longitude coordinates IBH g caps punes e Usage information if applicable e Intersection information if any Tapping the Intersection Info button displays a detailed view of the intersection formation e You can also do one of the following from a waypoint popover e Tap Add to Route to add the waypoint to your current route if it is not already e Tap Remove from Route to remove t
35. e a point or object along your intended route Mobile FliteDeck displays additional information for that object October 2015 Jeppesen Mobile FliteDeck User Guide Copyright O 2015 Jeppesen All rights reserved 31 Setting Up and Editing Your Flight Editing Your Route JEPPESEN 2 Depending on the object selected you can create a user waypoint review additional information select the object to add it to or remove it from your route NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is enabled and the minimum GPS accuracy requirement is met Edit Your Route with Rubber Band Routing To edit your route using rubber band routing 1 Touch a point along the existing route line Mobile FliteDeck displays a point along the route line 2 Drag the route line with your finger to the point that you want to add to the route and release 3 After you release your finger select the action that you want to perform NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is enabled and the minimum GPS accuracy requirement is met Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 32 setting Up and Editing Your Flight Y JEPPESEN Editing Your Route Create User Waypoints Y ou can create user waypoints from inside the Flight Info drawer or by interacting with the enroute map L
36. e the ESEA KOEN tight The sending iPad then displays Shared or Declined depending on the action the recipient chooses Share a Saved Flight Between Devices Without Loading It To share a saved flight without loading it 1 Open the Flight Info drawer 2 Tap the Saved Flights button at the bottom of the drawer 3 Tap a saved flight to expand its view Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 22 setting Up and Editing Your Flight JEPPESEN Sharing Flight Information 4 Tap the Share button for the selected flight From the list of nearby iPads select the Pad with which you want to share Mobile FliteDeck displays a notification on the receiving ene iPad that you would like to share flight information The recipient chooses to Load Save or Decline NOTE To share flight information between two iPads ensure that both iPads have established a Wi Fi or Bluetooth connection that Allow Flight Sharing is set to ON in JeppFD global settings and that Mobile FliteDeck is running on both iPads What is Shared Between iPads When you share Mobile FliteDeck flight information from one iPad to another the following is shared e Origin destination and any alternate airports e Navaids waypoints including user waypoints and airways that are a part of the route e Selected terminal charts for the flight NOTE Both iPads must include the termin
37. eared route does not change the active flight When you save an ATC cleared route without loading it Mobile FliteDeck adds the route to the list of saved flights To save an ATC cleared route without loading it as the active flight 1 Open the Flight Info Drawer 2 Tap the ATC Clearances button 3 From the list of displayed clearances tap the desired clearance to select it 4 Tap the Save button Mobile FliteDeck updates the list of saved flights with the route Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved Setting Up and Editing Your Flight JEPPESEN Editing Your Route Editing Your Route There are several ways you can edit your route You can edit a route from within the Flight Info drawer or by interacting with the enroute map itself Edit Your Route in the Flight Info Drawer To edit your route from within the Flight Info drawer 1 Open the Flight Info Drawer e To add delete or edit airports tap in the origin destination or alternate airport fields and edit the information e To add delete or edit any of the route points for the active flight tap in the route description box and edit the route description 2 Tap Done on the keyboard 3 Tap the Flight Info drawer tab to close the drawer Edit Your Route by Interacting with the Map To edit the route of the active flight by interacting with the enroute map 1 Touch hold and releas
38. eppesen All rights reserved 73 setting Up and Editing Your Flight Viewing Mid Cycle Chart Revisions Y JEPPESEN Viewing Mid Cycle Chart Revisions When charts with multiple revision dates are available you can select the revision date you prefer for all charts at the airport as well as on a chart by chart basis A mid cycle chart revision occurs when a chart takes effect in the middle of a scheduled chart revision time period About Mid Cycle Chart Revisions Whenever Terminal Charts are updated most all charts are effective upon receipt and available to you immediately in FliteDeck Pro Some charts however take effect mid cycle For those charts that take effect mid cycle Mobile FliteDeck displays an amber badge which indicates that a mid cycle chart revision is available The badge appears within 24 hours of the revised chart effectivity change NOTE Always brief selected terminal charts including a review of effectivity dates Switch Between Available Chart Versions from the Airports List Whenever a revision exists for a chart at an airport in your route Mobile FliteDeck displays an effectivity badge on the Airports button and in the expanded Route Airports list Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 74 Setting Up and Editing Your Flight Y JEPPESEN Viewing Mid Cycle Chart Revisions Route Airports Origin Effectivity KBOS Effective
39. extent of your route in Enroute view or to the full extent of the chart in Terminal Charts view Two finger Swipe to Navigate Swipe two fingers to flip through your selected terminal charts like flipping through pages in a book October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 3 Getting Started JeppFD Global Settings Y JEPPESEN Four finger Swipe Between Open Apps Swipe four fingers to move back and forth between one open app and another For example you can do this gesture to navigate back and forth between an open PDF reader and Mobile FliteDeck JeppFD Global Settings To adjust Mobile FliteDeck global settings e Tap Settings from your iPad Home screen e From the list of application settings tap JeppFD Settings Sleep Mode You can switch Sleep Mode to OFF to ensure that your iPad nts pcre pp ro cg stays powered on during flight The setting is ON by default Sleep Mode A CATA NOTE Switching Sleep Mode to OFF reduces the iPad battery life Allow Flight Sharing O Display ATC Clearances Flight Info Adjust these settings to customize how you send and receive sois flight information pon a Sharing O Display ATC Clearances Allow Flig ht Sharing Pa To share flight information between two Pads actively running Mobile FliteDeck ensure that Allow Flight Sharing is set to ON The setting is ON by default Jeppesen Mobile Fl
40. g of enroute map information and the display of ATC clearances This release also addresses usability issues with flight plan integration mid cycle chart revisions user waypoint interactions unscheduled updates and the in app help system Release Identification Information This document supports Mobile FliteDeck version 2 7 See the Jeppesen Mobile FliteDeck Release Notes for the most updated list of hardware supported and operating system requirements Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 2 Getting Started JEPPESEN Basic Pad Gestures Getting Started You can use basic iPad gestures to interact with your Mobile FliteDeck app Mobile FliteDeck does not support the five finger pinch gesture to minimize the app Mobile FliteDeck 2 7 supports both the 10S 9 Slide Over and Picture in Picture multitasking functionalities It does not support the 108 9 Split View multitasking functionality Basic iPad Gestures Pinch to Zoom Zoom in and out of the display by moving your thumb and finger in a pinching gesture Touch Hold then Release When interacting with the enroute map you can touch hold and then release any object on the map to add it to your route delete it from your route or view more information about it Double tap to Zoom Out Double tap one finger to zoom out to the full
41. ght 2015 Jeppesen All rights reserved 65 setting Up and Editing Your Flight Displaying Enroute Weather JEPPESEN About Enroute Weather Updates After you establish an Internet connection and switch Weather to ON Mobile FliteDeck checks the selected weather type for updates Mobile FliteDeck downloads weather data within the radius of your route or scales data to your coverage area e If your enroute data coverage is not worldwide Mobile FliteDeck downloads weather data only within the boundaries of your enroute data coverage e If your enroute data coverage is worldwide and a route is entered Mobile FliteDeck downloads weather data only for an area that extends 1 000 NM around your route including the beginning and ending points of the route e If your enroute data coverage is worldwide but no route is entered Mobile FliteDeck downloads weather data for the selected weather type for the entire worldwide coverage Weather information for the selected weather type is automatically checked every six minutes At this interval only weather that has been updated on the Jeppesen Weather server 1s updated on your iPad Surface Observations To view surface observations 1 Tap the Weather button 2 Switch Weather to ON 3 Tap Surface Observations 4 Tap away from the Weather popover to dismiss it and view the weather overlaid on the map Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 201
42. he waypoint form your route if it is currently a part of your route e Tap Direct To to add the waypoint to your current route and remove all points between your aircraft position and the waypoint NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is set to ON and the minimum GPS accuracy requirement is met Flying Direct To removes all route points between your current aircraft position and the selected object Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 94 Setting Up and Editing Your Flight Y JEPPESEN Viewing Object Details on the Map VFR Waypoints VFR waypoints displayed in the VFR enroute theme include e VFR waypoints e VFR checkpoints e VFR landmarks e Compulsory non compulsory reporting points e Compulsory non compulsory helicopter VFR reporting points e Military route mileage breaks e Advisory route mileage breaks October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 55 Setting Up and Editing Your Flight Additional Viewing Object Details on the Map JEPPESEN Navaids To view details for a navaid touch hold and release a navaid on the enroute map The navaid popover displays the following ALTOONA VOR AOO information ALTOONA PA USA 108 8 MHz N 40 19 5 W078 18 2 7 7 F wares e Navaid name and identifier Terminal S e Geographic locati
43. hen you remove it manually For more information see Remove a User Waypoint from Your Route Radial DME User Waypoints The location of these waypoints is based on the radial DME that you enter in the Name field When you add this type of waypoint to your route it 1s considered temporary and is removed when the route is cleared or you remove it manually For more information see Remove a User Waypoint from Your Route Named User Waypoints These user waypoints are considered permanent You can create them to name a point in space for easier recognition and recall Named user waypoints may or may not be part of a route They are not removed when a route is cleared You must manually delete named user waypoints For more information see Delete a User Waypoint Jeppesen Mobile FliteDeck User Guide October 2015 34 Copyright 2015 Jeppesen All rights reserved setting Up and Editing Your Flight Y JEPPESEN Editing Your Route Create a Latitude Longitude User Waypoint To create a latitude longitude user waypoint by interacting with the map 1 Touch hold and release the enroute map at the location im where you want to insert a waypoint Mobile FliteDeck displays the New Waypoint popover e To enter comments tap in the Comments field 2 Complete the action by doing one of the following e To add the waypoint to your current route tap Add to Route Add To Route Direct Ta e To add the wayp
44. his Document Intended Audience The intended audiences for the Mobile FliteDeck User Guide are pilots and support specialists who are new to Mobile FliteDeck Additional References In addition to this User Guide Jeppesen provides detailed task oriented training and documentation for Mobile FliteDeck on the web at the Jeppesen Mobile FliteDeck Training and Documentation page Help is also available from within the app from the Settings button on the Mobile FliteDeck toolbar October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 1 Introduction Technical Support Y JEPPESEN Technical Support Jeppesen provides technical support 24 hours a day 7 days a week at e North America Toll Free 800 537 7225 e United States Direct 303 328 4170 e United Kingdom 44 1293 842407 e Australia 61 73 105 9450 e All Other International 49 6102 507004 e Email navsupport jeppesen com e Web jeppesen com jepptd Release Summary Thank you for using Jeppesen Mobile FliteDeck To make our app better for you Jeppesen 105 applications are continually modified to be fully compatible with the latest Apple operating system and 105 devices 105 9 is smarter faster and more powerful and so is this latest version of Mobile FliteDeck In addition to being compatible with 108 9 and resolving various known issues Mobile FliteDeck version 2 7 introduces a VFR enroute theme enhanced filterin
45. ight Info drawer tab Jeppesen Mobile FliteDeck User Guide 11 Setting Up and Editing Your Flight Overview JEPPESEN Active Flight The active flight is the displayed flight It includes origin and destination airports any alternate airports and the route description KDEN sw KCOS 2 KDEN 1 KCOS x The active flight also includes any terminal charts associated with the flight that you have selected Enter Alternate Airports The name of the active flight appears on the Flight Info drawer Enroute View and Terminal Charts View To view the active flight with respect to either the enroute or terminal air structures e To access the enroute map pa s tap the Enroute view button e To access terminal charts tap the Terminal Charts view button Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 12 2 JEPPESEN Set Up Your Route KDEN su KCOS 1 KDEN Enter Navaids W 1 KCOS Q Enter Alternate Airports New Flight EPKEE2 GATTA ICT LITTAMMY4 October 2015 Setting Up and Editing Your Flight Set Up Your Route There are several ways to set up your route You can Manually enter the route information into the Flight Info drawer or from interacting with the map Load a saved flight from your list of saved flights Load a route from a flight shared from another device another app or from your avionics
46. ile FliteDeck settings to their default values To complete resetting user settings relaunch Mobile FliteDeck after switching this option ON and tap Proceed to confirm restoring user settings Switch Deactivate to ON to remove all Jeppesen data and clear the activation information from the iPad To complete the deactivation relaunch Mobile FliteDeck after switching this setting ON and tap Proceed to confirm the deactivation process This action releases the Site Key Jeppesen Mobile FliteDeck User Guide October 2015 10 Copyright 2015 Jeppesen All rights reserved Y JEPPESEN setting Up and Editing Your Flight Overview Setting Up and Editing Your Flight Mobile FliteDeck makes it easy to access the information you use most Overview FliteDeck Toolbar Views Enroute Theme Present Position Flight Info Drawer Tab Notes Weather 10 26 AM High Enroute October 2015 Copyright 2015 Jeppesen All rights reserved Create a New Flight 10 40 AM VFR Enroute Save Active Flight Share Active Flight View Saved Flights View Flight Plans View ATC Clearances Enroute Map Object Buttons Distance Measuring Tool Filters Menu Flight Info Drawer The Flight Info drawer is where you create new flights It is also where you can edit save and share flights import flight plan routes and access ATC clearances To open and close the expandable Flight Info drawer tap the Fl
47. iteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 4 F JEPPESEN Moving Map Display Ownship Display VFR Theme October 2015 O O Getting Started JeppFD Global Settings Display ATC Clearances To display and load ATC cleared routes ensure that Display ATC Clearances is set to ON The setting is ON by default Enroute View Adjust these settings to customize your enroute view NOTE Centering the map over the ownship location and displaying ownship location on the enroute map are both designed to improve situational awareness during enroute flight This functionality is not to be used as the basis for navigation Operators may require additional authorizations to use these functions Moving Map To be able to track your aircraft recenter the enroute map over your aircraft location and view the enroute map in a track up orientation ensure that Moving Map is set to ON The setting is ON by default Display Ownship To display ownship position on the enroute map ensure that Display Ownship is set to ON The setting is ON by default NOTE The minimum GPS accuracy requirement to display ownship on the enroute map is 200 meters Display VFR Theme To be able to display the VFR enroute theme ensure that Display VFR Theme is set to ON This setting is ON by default Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 5 Getting Started
48. jal waypoints and navaids at a larger map scale so that you can view He ORs this data within the context of your route and other information Slit on the map Minimum Rwy Length 0 0 a Show Aipors AtANScales O The Show at All Scales filter enables you view these objects at all scales regardless of your zoom level To view airports waypoints and navaids at all scales 1 Tap the Filters Menu button lt to expand the menu 2 For each of the following objects that you want to view at all scales tap its corresponding button e Airports NOTE The filters menu opens to the Airports menu by default Tapping that button with the filter menu open shows and hides Airports e Waypoints e Navaids Switch Show At All Scales to ON 4 Ifthe object is currently not showing on the map tap the object button to show the filtered object on the map 5 Tap away from the expanded menu or tap the Filters Menu button gt to collapse the menu October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 49 setting Up and Editing Your Flight Displaying Enroute Themes Airports Minimum Rwy Length 4 000 1219 4 000 1219 m DIM North Up Waypoints Show Waypoints At All Scales O Show Only Oceanic Entry Exit Y JEPPESEN Filter Airports by Runway Length You can filter airports by runway length to limit airports that appear on the enroute map To filter airp
49. k and your avionics system Flight Plans These fields contain default credentials that you can edit 1f required To import flight plan routes Mobile FliteDeck requires credentials in these fields Contact your Jeppesen account manager for credential details Company Manuals To access company uploaded manuals enter credentials in the Company Manuals fields as directed by your company Contact your Jeppesen account manager for credential details Allow Avionics Connection To enable a connection between Mobile FliteDeck and your avionics system switch Allow Avionics Connection to ON Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 9 Getting Started JeppFD Global Settings Sete E Hr Bh Catered cate Pasa Lhe ere Y JEPPESEN Support Information and Settings These settings include information to contact technical support and adjust Mobile FliteDeck application settings You can Tap the Jeppesen Support flyout to display contact information for technical support Contact information includes phone numbers email and Internet addresses In addition there is a Send log files via Email option This option enables you to email log files from your iPad to Jeppesen to assist in providing technical support Tap Terms amp Conditions to display URLs for both the current Application and the Data terms and conditions Switch Reset User Settings to ON to restore all Mob
50. le e Access to cruise tables e Notes if any ARTCC ATC Sector Information In Canada and the United States in the Low IFR Enroute theme Mobile FliteDeck displays geo referenced area traffic control centers with communication frequencies when zoomed in to a relevant zoom level and airspace 1s set to show making an ATC handoff easier a0 de 3 CLARKSBURG K KB Cr E 0 O l CLARKSBURG O e CKB E M Se Y 5 CLEVELAND KZOB MIR 18000 FL600 LKIN WASHINGTON i j 128 6 no 56 8 October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 57 Setting Up and Editing Your Flight Viewing Object Details on the Map JEPPESEN Class B Airspace Mobile FliteDeck displays DME arc values on the map for Class B airspace when zoomed in to a relevant zoom level and airspace is set to show nJ DME Ring Values VFR Airspace VFR airspace displayed in the VFR enroute theme includes boundaries for the following areas Flight information zones Military low flying areas Helicopter traffic areas Mode C areas Helicopter traffic zones Nature reserve areas VFR traffic areas Parachute jumping areas Bird areas Special flight areas Flight information services Traffic advisory areas Glider areas Ultralight areas Hang glider areas Intense radio areas Local flying areas Parachute areas Low level routes Prohibited overflight areas Gas venting area
51. licate plus sign button Delete a Saved Flight To delete a saved flight 1 Open the Flight Info drawer 1 Tap the Saved Flights button at the bottom of the drawer 2 Tap the Edit button and then tap the check mark circle next to the flight that you want to delete 3 Tap the Delete Trashcan button Sharing Flight Information Another way to set up your route is by loading a shared flight NOTE To share flight information between two iPads ensure that both iPads have established a Wi Fi or Bluetooth connection that Allow Flight Sharing is set to ON in JeppFD global settings and that Mobile FliteDeck is running on both iPads Share Flight Information Device to Device To share an active flight from one 1Pad running Mobile FliteDeck to another Flight Save 1 Open the Flight Info drawer 2 Tap the Share button at the top of the drawer October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 21 setting Up and Editing Your Flight Sharing Flight Information Y JEPPESEN 3 From the list of nearby devices select the iPad with which you want to share Now Flight Save Share Share Route Kerwin s Pad Margarita s iPad Mark Russell s iPad Sue s Pad Air Mobile FliteDeck displays a notification on the receiving iPad that you would like to share flight information 4 The recipient chooses to Load Save or Decline Sue Pad 3 would like to shar
52. lowing actions from an airport popover e Tap Go to Airport Diagram to switch to the Terminal Charts view and view that airport diagram e Tap Add to Route to add the airport to your current route if it is not already e Tap Remove from Route to remove the airport form your route 1 if it is currently a part of your route e Tap Direct To to add the airport to your current route and remove all points between your aircraft position and the airport NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is set to ON and the minimum GPS accuracy requirement is met Flying Direct To removes all route points between your current aircraft position and the selected object VFR Airports VFR airports displayed in the VFR enroute theme include e VFR and low use airports e Balloon facilities e Glider ports e Hang glider facilities e Heliports e Private airfields e Seaplane bases e Ultralight activity areas Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 92 F JEPPESEN Multiple Objects Setting Up and Editing Your Flight Viewing Object Details on the Map Airways To view details for an airway touch hold and release the airway You might be prompted to select a particular airway segment The airway popover displays the airway name segment start and end segment distance latitude and longitude coordinates inboun
53. n Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 83 Using the Mobile FliteDeck Toolbar Display GPS Status Brightness Night Theme a x Y Brightness Night Theme F JEPPESEN Adjust Brightness To adjust brightness 1 Tap the Brightness button 2 Slide the brightness control to decrease or increase the display brightness Switch to Night Theme To adjust for optimal viewing in low light conditions 1 Tap the Brightness button 2 Switch Night Theme to ON Display GPS Status Jeppesen Mobile FliteDeck User Guide 84 NOTE Mobile FliteDeck displays the GPS Status button on the toolbar when the Moving Map setting or one of the Display Ownship settings in JeppFD global settings is set to ON Tap the GPS Status button to view the current ground speed GPS altitude last position received and accuracy status GPS Badge Status A badge appears over the GPS Status button if the GPS signal does not meet the minimum accuracy requirement The minimum required GPS accuracy to display ownship position is e 200 meters for the enroute map e 50 meters for approach charts e 17 meters for taxi charts October 2015 Copyright 2015 Jeppesen All rights reserved Using the Mobile FliteDeck Toolbar SS JEPPESEN Display GPS Status Access Settings In addition to Updates you can use the Settings button to access in app help terrain legend display and airport diagram
54. n to select it Tap the Load button Mobile FliteDeck loads the route in the Flight Info drawer with origin destination alternate airports 1f any and the route description Flight plan routes can include the following information e Named user waypoints as long as they are included in the source e SIDs and STARs To view SID and STAR transition points on the enroute map ensure that the associated runway is entered in the route string See Adding SIDs and STARs for more information Close the Flight Info drawer to view the loaded route Close the Flight Info drawer to view the loaded route Refresh the List of Flight Plans Mobile FliteDeck displays the time and date that the list of flight plans was last updated at the bottom of the list As long as you are connected to the Internet you can refresh the list to check 1f any updates have become available since the last time you accessed the flight plans To refresh the list of flight plans tap the Refresh button at the bottom of the list Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 27 setting Up and Editing Your Flight Display and Load an ATC Cleared Route Y JEPPESEN Save a Flight Plan Route Without Loading lt When you save a flight plan route without loading 1t Mobile FliteDeck adds the route to the list of saved flights on your iPad It does not change the active flight in the Flight Info drawer To save a
55. oint to the current route and remove all points between your aircraft position and the waypoint tap Direct To NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is set to ON and the minimum GPS accuracy requirement is met e To create the latitude longitude waypoint without adding it to your route in which case it would be considered a permanent waypoint tap Done at the top of the New Waypoint popover Mobile FliteDeck displays the latitude and longitude coordinates for the newly created user waypoint on the map October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 35 Setting Up and Editing Your Flight Editing Your Route JEPPESEN Create a Radial DME User Waypoint Assume that air traffic control instructs you to fly Direct to 26 A DME on 156 radial off of Falcon VOR You can quickly create a radial DME user waypoint by interacting with the map To create a temporary radial DME user Lat Long N39 41 3 W104 49 1 waypoint r al j FOF156 28 1 Touch hold and release the enroute map FliteDeck displays the New Waypoint popover 2 Inthe Name field enter the VOR ident radial and DME Radials must be entered using three digits with a forward slash between the radial and the DME and they must not include any spaces Example FQF156 26 FQF156 26 3 To enter comments tap in the Comments field 4 Complete the
56. ol of your enroute view To further filter your enroute map view 1 Tap the Filters Menu button lt to expand the menu The filters menu opens to the Airports menu by default Airports 2 Tap the button that corresponds to the object type that you Airways want to filter l 3 Make any changes to filter the display of that object Waypoints N id NOTE Ifthe display of the object that the Filters menu is related to is avalas not showing on the enroute map tap the object button to show the filtered object on the map Airspace Terrain 4 Tap away from the expanded menu or tap the Filters Menu button gt to collapse the menu Cultural Information Waypoints Fj It ers Show Waypoints At All Scales M enu Show Only Oceanic Entry Exit Jeppesen Mobile FliteDeck User Guide October 2015 46 Copyright O 2015 Jeppesen All rights reserved setting Up and Editing Your Flight JEPPESEN Displaying Enroute Themes Enroute Object Button States Mobile FliteDeck displays four different object button states e An amber cue indicates that a filter is applied to the object e Highlighted buttons indicate that the object is showing on the map e Gray buttons indicate that the object is available but not showing on the map e Dark gray buttons indicate that the object is not available at the current zoom level or from the selected enroute theme Amber cue indicates filter is applied to the object Highlighted button indicates
57. on Ta e Latitude and longitude coordinates Add To Route Direct To e Station declination or magnetic variation e Morse code e Type of navaid e Additional information about the navaid type and usage if applicable e You can also do one of the following from a navaid popover e Tap Add to Route to add the navaid to your current route if it is not already e Tap Remove from Route to remove the navaid form your route if it is currently a part of your route e Tap Direct To to add the navaid to your current route and remove all points between your aircraft position and the navaid NOTE The Direct To option is available when the Moving Map setting in JeppFD global settings is set to ON and the minimum GPS accuracy requirement is met Flying Direct To removes all route points between your current aircraft position and the selected object Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 96 Setting Up and Editing Your Flight Y JEPPESEN Viewing Object Details on the Map Airspace To view details about airspace touch hold and release the airspace boundary The details available for airspace depend on the type of airspace selected FIR UIR Boundaries To view details about a specific FIR UIR boundary touch hold and release the boundary The FIR UIR popover displays the following information e Upper and lower limits e Communication information if availab
58. on is displayed on the enroute map about an object To learn more about an object that is displayed on the map touch hold and release the object Mobile FliteDeck highlights the object and displays an object details popover Airports In addition to general airport information the Airport popover includes information for runways communications notes and weather if available To view details about an airport 1 Touch hold and release the airport symbol e Tap Runways to view runway information Mobile FliteDeck displays the size and surface of all runways at the airport Reciprocal airport runways are grouped together in ascending order Tap a specific runway to view more information such as displaced threshold lighting and TDZ elevation Tap Communications to view airport communication information grouped by type When more than two of a given type are available the first two are provided Tap the More button to display more frequencies Tap Wx to view METAR TAF information at the airport Tap Notes if available to review operational notes associated with the airport These notes are also indicated visually on the enroute map by blue 1 icons 2 Tap away from the popover to dismiss it Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 91 Setting Up and Editing Your Flight Viewing Object Details on the Map Y JEPPESEN You can also perform one of the fol
59. oom level must be approximately 1OONM in or less to access them To access notes along your route 1 Tap the Notes button 2 Select the type of note that you want to view 3 Tap the desired note Mobile FliteDeck highlights the object on the map to which the note applies All of the notes provided on precomposed paper charts are available e Operational Tactically important information regarding specific navigation elements These notes are equivalent to Ball Flag notes on paper charts and are indicated visually on the enroute map by blue 1 icons You can also access operational notes directly from the enroute map by tapping 66599 holding and then releasing the associated blue 1 icons e Regional Procedures conditions or requirements for a specific geographical region These notes are equivalent to Floating notes on paper charts e Reference Aeronautical reference information for large charted areas These notes are equivalent to End Panel notes on paper charts Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 60 Setting Up and Editing Your Flight JEPPESEN Accessing Notes Notes that have already been read will be de emphasized in the list as long as the map view remains unchanged Reference Notes KZMA Miami Oceanic FIR UIR AUTHORIZATION FOR OPERATIONS ON Y ROUTES BETWEEN MYNA Nassau FIR UIR AUTHORIZATION FOR OPERA
60. orts by runway length 1 Tap the Filters Menu button lt to expand the menu NOTE The filters menu opens to the Airports menu by default 2 Tap the Minimum Rwy Length value and select the desired runway length 3 Tap away from the expanded menu or tap the Filters Menu button gt to collapse the menu NOTE You can apply both the Show Airports at All Scales option and the Minimum Runway Length filter at the same time This combined selection results in all airports with runways equal to or greater than the selected length showing at all scales Show Only Oceanic Entry and Exit Points Displaying only oceanic entry and exit points can also be useful in certain areas of the world To show only oceanic entry and exit points 1 From either the High IFR or Low IFR enroute theme tap the Filters Menu button lt to expand the menu 2 Tap the Waypoints button to access the filter 3 Switch Show Only Oceanic Entry Exit to ON 4 Tap away from the expanded menu or tap the Filters Menu button gt to collapse the menu Jeppesen Mobile FliteDeck User Guide October 2015 50 Copyright 2015 Jeppesen All rights reserved F JEPPESEN Setting Up and Editing Your Flight Viewing Object Details on the Map Viewing Object Details on the Map LI S18 October 2015 E Runways N V Communications Wx Go to Airport Diagram Add To Route Direct To Generally the closer the zoom level the more informati
61. our Flight with Respect to the Enroute Air Structure The Present Position button is available in the Enroute view when e Moving Map in JeppFD global settings is set to ON e The minimum required GPS accuracy to display ownship on the enroute map is met NOTE The minimum required GPS accuracy to display ownship on the enroute map is 200 meters View North Up or Track Up To change the enroute map orientation tap the North Up or Track Up button on the enroute map to switch between orientations NOTE To change the orientation to Track Up the Moving Map settings in JeppFD global settings is set to ON View Distance Calculations The distance measuring tool provides a set of range rings or arcs that you can show and hide by tapping a button To show and hide the range rings tap the Range Rings button As you zoom in or out the range rings change with the map scale The center most ring includes a compass rose that indicates true north south east and west Jeppesen Mobile FliteDeck User Guide Copyright O 2015 Jeppesen All rights reserved 63 Setting Up and Editing Your Flight Displaying Enroute Weather Y JEPPESEN Determine Distance with the Offset Indicator To determine the distance and direction from your aircraft to any other object on the map 1 Tap the Range Rings button to show the range rings 2 Pan the map so that the map object in question is in the center of the inner range ring A magen
62. points and Navaids for more information Filters M Y ou can also specify whether to show or hide only oceanic enu entries or exit points in the IFR themes See Show Only Oceanic Entry and Exit Points for more information In the VER theme you can show waypoints at all zoom scales Additionally you can show or hide low altitude waypoints VER checkpoints and VFR waypoints e Navaids You can customize your view in IFR and VFR themes to show navaids at all zoom scales See Show at All Scales Airports Waypoints and Navaids for more information e Airspace You can customize the airspace display to show or hide controlled airspace ATC sectors restricted airspace prohibited airspace warning and danger areas and other The Other category includes ADIZ alert areas equipment boundaries MOAs QNE QNH boundaries and training areas Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 48 setting Up and Editing Your Flight JEPPESEN Displaying Enroute Themes e Terrain No additional filters are available for terrain e Cultural Information The cultural information button is available from the VFR theme You can customize cultural information to show or hide city names city patterns high tension lines obstacles railroads and roads Show at All Scales Airports Waypoints and Navaids In less dense parts of the world you might need to view airports JO Se o
63. r Flight Working with Terminal Charts Y JEPPESEN Accessing Terminal Chart Information Working with Terminal Charts Selected chart Enroute View Terminal Chart View Airport Button Chart Type Buttons Chart List Terminal Weather ILS OR LOC Rwy 7 sae RNAV GPS Y Rwy 7 RNAV RNP Z Rwy 7 RWY 08 ILS OR LOC Rwy 8 RNAV GPS Y Rwy 8 RNAV ANP Z Rwy 8 RWY 161 ILS OR LOC Rwy 16L 11 RNAV GPS Y Rwy 16L RNAV RNP Z Rwy 16L RAWY 16R ILS OR LOC Rwy 16R 11 4 RNAV GPS Y Rwy 16R RNAV RNP Z Rwy 16R Jeppesen Mobile FliteDeck User Guide 68 12 20 PM RNAV GPS Y Rwy 8 KDEN KSLC KDEN OEN DENVER INT ch 82228 aa W OBA 082 i xu arca Climb to 10000 direct OL to WITNE and h e wnt ove 1 Rete weet mm are Cee let em be bes aap tog Em ur s 082 Ch 82228 W 08A 1 You can preview and select multiple charts for the active flight highlight and rotate the chart view ownship position and display METAR TAF from the Terminal Charts view Selected chart title Flight Info Drawer Tab DENVER COLO RNAV_ GPS Y Rwy 8 Chart preview area Highlight Rotate Selected Charts Bar October 2015 Copyright O 2015 Jeppesen All rights reserved Y JEPPESEN October 2015 Copyright 2015 Jeppesen All rights reserved setting Up and Editing Your Flight Working with Terminal Charts Highlight a Chart To highlight information on
64. rting a Route from a Flight Planning System Y JEPPESEN In addition when any Jeppesen flight planning system is used to generate a flight plan a copy of that flight plan can be easily sent to the Jeppesen system This functionality ensures that any flight plan created using a Jeppesen flight planning system can be easily accessed from within Mobile FliteDeck NOTE To work with flight plans ensure that valid credentials are entered under Services gt Flight Plans in JeppFD global settings and an Internet connection is established KSJC rw KLAX New Flight N39 31 6 W105 14 9 AVE SADDE6 KLAX x Enter Alternate Airports Sort by Flight Plans Retrieve Flight Plans and Load a Route Mobile FliteDeck displays plans that correspond to the designated call sign and that have an ETD from six hours into the future to twenty four hours into the past To retrieve flight plans and load a route 1 Open the Flight Info drawer 2 Tap the Flight Plans button Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 26 Y JEPPESEN October 2015 Setting Up and Editing Your Flight Importing a Route from a Flight Planning System Enter the call sign for the aircraft for example NJ104F or CMB123 Tap DONE on the keyboard Mobile FliteDeck displays a list of future and past flight plans for that call sign sorted by ETD newest to oldest Tap a flight pla
65. rved F JEPPESEN October 2015 Setting Up and Editing Your Flight Displaying Enroute Themes For example if you add a VFR checkpoint to your route from the VER enroute theme and then switch to the Low IFR enroute theme Mobile FliteDeck displays the checkpoint with a standard waypoint symbol When you switch back to the VFR enroute theme Mobile FliteDeck VFR Aeronautical Data Coverage Areas VER data coverage areas are subject to change As of this release date the following countries include VFR aeronautical data represented in the new Mobile FliteDeck VFR enroute theme Albania Austria Belgium Bosnia and Herzegovina Canary Islands Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Gibraltar Greece Hungary Ireland Italy Kosovo Latvia Lithuania Luxembourg Macedonia Malta Netherlands Norway Poland Portugal Serbia and Montenegro Slovakia Slovenia Spain Switzerland Sweden United Kingdom United States NOTE You may see VFR airports outside these coverage areas Copyright 2015 Jeppesen All rights reserved Jeppesen Mobile FliteDeck User Guide 43 setting Up and Editing Your Flight Displaying Enroute Themes Y JEPPESEN Filtering the Enroute View Default Filtering of Map Objects Depending on your zoom level and selected enroute theme certain map objects are automatically filtered to declutter your enroute map view NOTE Mobile FliteDeck display
66. s Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 58 Y JEPPESEN October 2015 Setting Up and Editing Your Flight Viewing Object Details on the Map Terrain You can show or hide terrain When terrain is set to show Mobile FliteDeck overlays the terrain legend on the enroute map You can hide the terrain legend that appears on the enroute map when terrain is showing by tapping the settings button on the Mobile FliteDeck toolbar For more information on hiding the terrain legend see Hide the Terrain Legend Cultural Information Cultural objects are available only from the VFR enroute theme The Cultural Information button displays the following information e City names e City patterns e High tension lines e Obstacles such as buildings towers plants suspended bridges and windmills e Railroads e Roads VFR Obstacles To view details about an obstacle displayed in the VFR theme touch hold and release the obstacle symbol Jeppesen Mobile FliteDeck User Guide Copyright O 2015 Jeppesen All rights reserved 99 setting Up and Editing Your Flight Accessing Notes Y JEPPESEN The VER obstacle popover displays the following information e Type of obstacle e Latitude and longitude coordinates e Elevation e Height e Lighting Number of obstacles Accessing Notes Mobile FliteDeck provides notes based on your current view Your z
67. s any object that is a part of your route on the map regardless of the object s show hide status enroute theme or zoom level The following table defines the default settings for the display of enroute map objects at specific zoom levels and enroute themes including the VFR theme EE Object Low IFR VFR NOTE Airports waypoints and navaids show on the map at all zoom levels when Show at All Scales is switched ON for the respective object See Show at All Scales Airports Waypoints and Navaids for more information Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 44 setting Up and Editing Your Flight JEPPESEN Displaying Enroute Themes Show and Hide Enroute Map Objects You can tap the enroute object buttons along the right side of the enroute map to show and hide specific map objects Airports Airways Waypoints Navaids Airspace Terrain Cultural Information NOTE The Cultural Information button is available from the VFR enroute theme To display the VFR enroute theme ensure that Display VFR Theme is set to ON in JeppFD global settings October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 45 setting Up and Editing Your Flight Displaying Enroute Themes Y JEPPESEN Customized Filtering of Enroute Objects You can also filter specific types of enroute objects for even more precise contr
68. system Load a route from an imported flight plan Load a cleared ATC route This section describes how you can manually enter route information Create a New Flight To create a new flight by manually entering route information in the Flight Info drawer Open the Flight Info drawer Tap the New Flight button Tap in each field and enter the origin destination and any alternate airports for the new flight e Identify airports using either the city name airport ICAO or IATA identifier e If multiple alternate airports are entered separate each with a space Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 13 setting Up and Editing Your Flight Set Up Your Route JEPPESEN Enter Route Points a To add navaids waypoints and airways to your route KCOS dd a 2 ee 1 Tap in the route description box and enter route points o e You can use either the keyboard or copy and paste to enter your route e Mobile FliteDeck automatically adds all airports that you enter in the route to the list of route airports available to you from the Terminal Charts view e You can create routes from any object that is available through Search e For more information on valid route point formats see Route Point Formats e For more information on entering SIDs STARs see Adding SIDs and STARs 4 34 PIM High Enroute 2 Origin Enter Navales Waypoints Airways J Route Descrip
69. ta offset indicator appears showing distance and direction to your aircraft position NOTE To determine distance with the offset indicator the Moving Map setting in JeppFD global settings must be set to ON Displaying Enroute Weather Weather data is provided by Jeppesen Jeppesen receives source data primarily from the National Weather Service and the UK Met Office as well as other private weather providers that Jeppesen utilizes in creating aviation specific weather information Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 64 Setting Up and Editing Your Flight JEPPESEN Displaying Enroute Weather Surface Observations not affected by airport filtering Turbulence Winds Aloft P VFR IFR LIFR OVC BKN SCT FEW CLR mmm O 6 4 a O Mobile FliteDeck displays an enroute weather selection boundary on the enroute map to indicate the extent of your weather coverage area NOTE To receive enroute weather data ensure that Display Enroute Wx is set to ON in JeppFD global settings and an Internet connection must be established To display enroute weather 1 Tap the Wx button 2 Switch Weather to ON 3 Tap the weather type that you want to view Enroute weather types include surface observations RADAR NEXRAD echo tops and lightning and icing turbulence and winds aloft forecasts October 2015 Jeppesen Mobile FliteDeck User Guide Copyri
70. te Heae suet 78 Recognize Updates Bar Color Codes 2 oo 3 26 8ie dew ene bebe Ke ES Rw ERE OSE EDS 79 Switch Between Two Available Enroute Database Versions oooooo o o ooo 79 Perform an Unscheduled Update o o oo ooooooooooooo 80 Using the Mobile FliteDeck Toolbar ooooooooooooooo c lt ooooooo 81 NISW Manual sesse rrara bod hey tau poste oe ohooh ona E 81 View Chano NOCES py da ae 82 Adjust Brightness and Night Theme 2 2 0 ccc cece eee eee 83 AJUSTE DIIENMESS hoc nob hse dns beng e Abe ROBES RG REE ASS 84 October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved Contents Y JEPPESEN Switch to Night Theme 2 in RA ae 84 Display GPS Status rec roo aaa EEA EA bd 84 ACUC O sionistas odo tr enanas 85 Y nace eased oecwas ua Ver hne Aes Gosh OOS sees eee nse ean eg aes oan 85 Il grasa cached O a eos peak E ed SA Gh ne Se Gee ee eo ee 85 Hide the Lordin dL e Bnd sis erario Ae ae ERS ced des 86 Switch to the Airport Diagram Upon Landing 0 ces 86 IOC tieMDisplar osea eee rene hes psa 86 Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved Introduction JEPPESEN About This Document Jeppesen Mobile FliteDeck User Guide Introduction This document provides detailed instructions for using Jeppesen Mobile FliteDeck version 2 7 an 105 electronic flight bag EFB application About T
71. tion box High e Enter Alternate Airports y Flight Info Drawer tab a MO apts o 2 Tap Done on the keyboard when you finish entering your flight information 3 Tap the Flight Info drawer tab to close the drawer Jeppesen Mobile FliteDeck User Guide October 2015 Copyright O 2015 Jeppesen All rights reserved 14 Y JEPPESEN New Flight 9 N37 56 6 W122 21 4 SAC V23 RBL New Flight N37 56 6 W122 21 4 October 2015 Setting Up and Editing Your Flight Set Up Your Route Route Point Formats Both plain language and dot notation formats are supported in the route description For example e N37 56 6 W122 21 4 SAC V23 RBL plain language e N37 56 6 W122 21 4 SAC V23 RBL dot notation Latitude and Longitude Coordinate Formats Mobile FliteDeck supports the following latitude and longitude coordinate formats in the route description e NxxWxxx N37W122 e Nxx x Wxxx x N37 5 W122 2 e Nxx xx x Wxxx xx x N37 56 6 W122 21 4 e Nxx xx xx Wxxx xx xx N37 56 60 W122 21 40 e NxxxWxxxx N375W1222 e Nxxxx W xxx xx N 37 56 W 122 40 e XXXXN 5275N e XXNXX 75N70 e XXNXXXW 37N122W Adding SIDs and STARs After you enter origin and destination airports you can enter a SID or a STAR or both in the route description box When the runway is a part of the route description transition points are depicted on the enroute map by a dashed line A label that identifies the procedure appears along the dashed line
72. ttings e The badge is amber when data in use is current and an VY Updates update is available 2 Help e The badge is red when data is not current and an update is available NOTE The time necessary to download and perform updates depends on the speed of the Internet connection and the size of the data coverage area Ensure that you have the necessary time and bandwidth to perform the complete update before commencing the update To perform an update 1 Tap the Settings button OS 2 Tap Updates Y Updates 3 Tap the Update button Help e At any time during an update you can pause the download by tapping the Pause button at the top of the update status line If more than one update is available Mobile FliteDeck automatically begins to download the next available update e To resume downloading after pausing an update tap the Resume button at the top of the update status line e To cancel all updates and exit Updates tap the X at the top of the Updates screen To resume updates after having canceled tap the Settings button tap Updates and then tap the Resume button Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 78 Y JEPPESEN Jan 3 Today Jan 17 October 2015 Copyright 2015 Jeppesen All rights reserved Performing Data Updates Perform an Update Recognize Updates Bar Color Codes The Updates bar color code meanings are
73. ute map ensure that Display Enroute Wx is set to ON This setting is set to ON by default Display METAR TAF To display METAR TAF information ensure that Display METAR TAF is set to ON This setting 1s set to ON by default Temperature Unit and Default METAR TAF Format Temperature Unit options are Fahrenheit default or Celsius Default METAR TAF Format options set your preference of views for METAR TAF information The options are Raw default or Decoded You can switch between the two view formats from the Weather popover Jeppesen Mobile FliteDeck User Guide October 2015 8 Copyright O 2015 Jeppesen All rights reserved F JEPPESEN Version Site Key Serial Number Terminal Charts Coverage Codes Services October 2015 Getting Started JeppFD Global Settings Account Info These settings include information about the Mobile FliteDeck app and your data coverages Version displays the version and build number for the Mobile FliteDeck app The Site Key is associated with the serial number There is one site key per device The Serial Number defines your Jeppesen subscription coverage area The Terminal Charts Coverage Codes identify your terminal chart coverages and is used as a reference for technical support The Services flyout provides a place to enter credentials so that you can import flight plan routes access company uploaded manuals and share flight information between Mobile FliteDec
74. viewing options Updates At any time you can tap the Settings button from the Mobile FliteDeck toolbar and tap Updates to view the status of your Enroute Terminal Charts and Manuals data and perform Settings updates See Performing Data Updates as described on page 77 for more information y Updates 2 Help Help To access the Mobile FliteDeck in app Help 1 Tap the Settings button 2 Tap Help 3 Perform one of these actions aes e Tap in the Search field and enter your search request 4 Updates e Navigate the Help topics by tapping a topic Help 4 Tap Done at the top of the Help window to dismiss the Help screen Setting Up and Editing Your Flight Viewing Enroute Map Information Accessing Terminal Chart Information TECH SUPPORT Toll Free 800 537 7225 Email Tech Support Domestic 303 328 4170 International 49 6102 507004 Tech Support on the Web October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 85 Using the Mobile FliteDeck Toolbar Lock the Display Settings FJ Updates Help Print Terrain Legend Show Taxi On Landing aa Y JEPPESEN Hide the Terrain Legend You might need to see the entire enroute map without the terrain legend overlaid on it The Terrain Legend is ON by default To hide the terrain legend 1 Tap the Settings button 2 Switch Terrain Legend to OFF 3 Tap away from
75. vionics Wi Fi Jeppesen Mobile FliteDeck User Guide October 2015 Copyright 2015 Jeppesen All rights reserved 24 Setting Up and Editing Your Flight Y JEPPESEN Importing a Route from a Flight Planning System To share a route to your avionics system 1 Open the Flight Info drawer SE mm mna Share Route 2 Load the flight that you want to share into the Flight Info Load Route drawer if it is not already the active flight 3 Tap the Avionics button at the top of the Flight Info drawer 4 Tap Share Route Load a Route from Your Avionics System NOTE To load a route between Mobile FliteDeck and your avionics system ensure that Services gt Allow Avionics Connection is set to ON in JeppFD global settings and that your iPad is connected to the avionics Wi Fi To load a route from your avionics system into the Flight Info drawer 1 Open the Flight Info drawer 2 Tap the Avionics button at the top of the drawer 3 Tap Load Route Importing a Route from a Flight Planning System This section describes how you might enter a route by importing the route from a flight plan You can import a route from any flight planning system that is set up to deliver flight plans to Mobile FliteDeck Jeppesen has implemented a system that communicates with Mobile FliteDeck October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 25 setting Up and Editing Your Flight Impo
76. y NOTE User waypoints that are a part of a route can be shared between iPads and are available in all enroute themes and zoom scales When you create user waypoints by interacting with the map you can also name and add comments to the waypoint Ada Te Route Direct To Types of User Waypoints Any user waypoint that is named or created from the map and not added to a route is considered permanent Permanent user waypoints must be individually deleted in order to eliminate them from the enroute map Removing a permanent user waypoint from the route or clearing the route when creating a new flight does not delete a permanent user waypoint Any user waypoint that is part of an imported route or created from the map without a name is considered temporary Temporary user waypoints are removed when the waypoint is removed from the route or when the route is cleared when creating a new flight October 2015 Jeppesen Mobile FliteDeck User Guide Copyright 2015 Jeppesen All rights reserved 33 Setting Up and Editing Your Flight Editing Your Route Y JEPPESEN The following list provides some common examples of the types of user waypoints that you can create e Latitude Longitude User Waypoints Y ou can add these waypoints to your route to view a point in space for a single instance of a route When you add this type of waypoint to your route it 1s considered temporary and is removed when the route is cleared or w

Mobile FliteDeck User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents